PlotOptionsColumn

Instance Constructors

new PlotOptionsColumn()

Value Members

final def !=(arg0: Any): Boolean

Definition Classes
AnyRef → Any
final def ##(): Int

Definition Classes
AnyRef → Any
final def ==(arg0: Any): Boolean

Definition Classes
AnyRef → Any
val allowPointSelect: UndefOr[Boolean]

Allow this series' points to be selected by clicking on the markers, bars or pie slices.
Allow this series' points to be selected by clicking on the markers, bars or pie slices.
Example:
1. Line, column, pie
Since
1.2.0
val animation: UndefOr[Boolean]

Enable or disable the initial animation when a series is displayed.
Enable or disable the initial animation when a series is displayed. The animation can also be set as a configuration object. Please note that this option only applies to the initial animation of the series itself. For other animations, see chart.animation and the animation parameter under the API methods. The following properties are supported: <dl> <dt>duration</dt>
The duration of the animation in milliseconds.
<dt>easing</dt>
A string reference to an easing function set on the Math object. See the easing demo.
</dl>
Due to poor performance, animation is disabled in old IE browsers for column charts and polar charts.
Example:
1. Animation disabled, slower animation, custom easing function.
val animationLimit: UndefOr[Double]

For some series, there is a limit that shuts down initial animation by default when the total number of points in the chart is too high.
For some series, there is a limit that shuts down initial animation by default when the total number of points in the chart is too high. For example, for a column chart and its derivatives, animation doesn't run if there is more than 250 points totally. To disable this cap, set animationLimit to Infinity.
final def asInstanceOf[T0]: T0

Definition Classes
Any
val borderColor: UndefOr[|[String, Object]]

The color of the border surrounding each column or bar.
The color of the border surrounding each column or bar.
In styled mode, the border stroke can be set with the .highcharts-point rule.
Example:
1. Dark gray border
val borderRadius: UndefOr[Double]

The corner radius of the border surrounding each column or bar.
The corner radius of the border surrounding each column or bar.
Example:
1. Rounded columns
val borderWidth: UndefOr[Double]

The width of the border surrounding each column or bar.
The width of the border surrounding each column or bar.
In styled mode, the stroke width can be set with the .highcharts-point rule.
Example:
1. 2px black border
val className: UndefOr[String]

A class name to apply to the series' graphical elements.
A class name to apply to the series' graphical elements.

Since
5.0.0
def clone(): AnyRef

Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
@throws( ... )
val color: UndefOr[|[String, Object]]

The main color or the series.
The main color or the series. In line type series it applies to the line and the point markers unless otherwise specified. In bar type series it applies to the bars unless a color is specified per point. The default value is pulled from the options.colors array.
In styled mode, the color can be defined by the colorIndex option. Also, the series color can be set with the .highcharts-series, .highcharts-color-{n}, .highcharts-{type}-series or .highcharts-series-{n} class, or individual classes given by the className option.
Example:
1. General plot option, one specific series, area color
val colorByPoint: UndefOr[Boolean]

When using automatic point colors pulled from the options.colors collection, this option determines whether the chart should receive one color per series or one color per point.
When using automatic point colors pulled from the options.colors collection, this option determines whether the chart should receive one color per series or one color per point.
Example:
1. False by default, true
Since
2.0
val colorIndex: UndefOr[Double]

Styled mode only.
Styled mode only. A specific color index to use for the series, so its graphic representations are given the class name highcharts-color-{n}.

Since
5.0.0
val colors: UndefOr[Array[|[String, Object]]]

A series specific or series type specific color set to apply instead of the global colors when colorByPoint is true.
A series specific or series type specific color set to apply instead of the global colors when colorByPoint is true.

Since
3.0
val crisp: UndefOr[Boolean]

When true, each column edge is rounded to its nearest pixel in order to render sharp on screen.
When true, each column edge is rounded to its nearest pixel in order to render sharp on screen. In some cases, when there are a lot of densely packed columns, this leads to visible difference in column widths or distance between columns. In these cases, setting crisp to false may look better, even though each column is rendered blurry.
Example:
1. Crisp is false.
Since
5.0.10
val cropThreshold: UndefOr[Double]

When the series contains less points than the crop threshold, all points are drawn, event if the points fall outside the visible plot area at the current zoom.
When the series contains less points than the crop threshold, all points are drawn, event if the points fall outside the visible plot area at the current zoom. The advantage of drawing all points (including markers and columns), is that animation is performed on updates. On the other hand, when the series contains more points than the crop threshold, the series data is cropped to only contain points that fall within the plot area. The advantage of cropping away invisible points is to increase performance on large series. .
val cursor: UndefOr[String]

You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.
You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.
Example:
1. Pointer cursor on line graph, on columns, on scatter markers
val dataLabels: UndefOr[CleanJsObject[PlotOptionsColumnDataLabels]]

Options for the series data labels, appearing next to each data point.
Options for the series data labels, appearing next to each data point.
In styled mode, the data labels can be styled wtih the .highcharts-data-label-box and .highcharts-data-label class names (see example).
val depth: UndefOr[Double]

Depth of the columns in a 3D column chart.
Depth of the columns in a 3D column chart. Requires highcharts-3d.js.
Example:
1. Basic 3D column chart
Since
4.0
val description: UndefOr[String]

Requires Accessibility module
Requires Accessibility module
A description of the series to add to the screen reader information about the series.
Example:
1. Accessible stock chart
Since
5.0.0
val edgeColor: UndefOr[|[String, Object]]

3D columns only.
3D columns only. The color of the edges. Similar to borderColor, except it defaults to the same color as the column.
val edgeWidth: UndefOr[Double]

3D columns only.
3D columns only. The width of the colored edges.
val enableMouseTracking: UndefOr[Boolean]

Enable or disable the mouse tracking for a specific series.
Enable or disable the mouse tracking for a specific series. This includes point tooltips and click events on graphs and points. For large datasets it improves performance.
Example:
1. No mouse tracking
final def eq(arg0: AnyRef): Boolean

Definition Classes
AnyRef
def equals(arg0: Any): Boolean

Definition Classes
AnyRef → Any
val events: UndefOr[CleanJsObject[PlotOptionsColumnEvents]]
val exposeElementToA11y: UndefOr[Boolean]

By default, series are exposed to screen readers as regions.
By default, series are exposed to screen readers as regions. By enabling this option, the series element itself will be exposed in the same way as the data points. This is useful if the series is not used as a grouping entity in the chart, but you still want to attach a description to the series.
Requires the Accessibility module.
Example:
1. Accessible data visualization
Since
5.0.12
def finalize(): Unit

Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
@throws( classOf[java.lang.Throwable] )
val findNearestPointBy: UndefOr[String]

Determines whether the series should look for the nearest point in both dimensions or just the x-dimension when hovering the series.
Determines whether the series should look for the nearest point in both dimensions or just the x-dimension when hovering the series. Defaults to 'xy' for scatter series and 'x' for most other series. If the data has duplicate x-values, it is recommended to set this to 'xy' to allow hovering over all points.
Applies only to series types using nearest neighbor search (not direct hover) for tooltip.
Example:
1. Different hover behaviors
Since
5.0.10
final def getClass(): Class[_]

Definition Classes
AnyRef → Any
val getExtremesFromAll: UndefOr[Boolean]

Whether to use the Y extremes of the total chart width or only the zoomed area when zooming in on parts of the X axis.
Whether to use the Y extremes of the total chart width or only the zoomed area when zooming in on parts of the X axis. By default, the Y axis adjusts to the min and max of the visible data. Cartesian series only.

Since
4.1.6
val groupPadding: UndefOr[Double]

Padding between each value groups, in x axis units.
Padding between each value groups, in x axis units.
Example:
1. 0.2 by default, no group padding - all columns are evenly spaced
val groupZPadding: UndefOr[Double]

The spacing between columns on the Z Axis in a 3D chart.
The spacing between columns on the Z Axis in a 3D chart. Requires highcharts-3d.js.

Since
4.0
val grouping: UndefOr[Boolean]

Whether to group non-stacked columns or to let them render independent of each other.
Whether to group non-stacked columns or to let them render independent of each other. Non-grouped columns will be laid out individually and overlap each other.
Example:
1. Grouping disabled
Since
2.3.0
def hasOwnProperty(v: String): Boolean

Definition Classes
Object
def hashCode(): Int

Definition Classes
AnyRef → Any
final def isInstanceOf[T0]: Boolean

Definition Classes
Any
def isPrototypeOf(v: Object): Boolean

Definition Classes
Object
val keys: UndefOr[Array[String]]

An array specifying which option maps to which key in the data point array.
An array specifying which option maps to which key in the data point array. This makes it convenient to work with unstructured data arrays from different sources.
Example:
1. An extended data array with keys
Since
4.1.6
val linkedTo: UndefOr[String]

The id of another series to link to.
The id of another series to link to. Additionally, the value can be ":previous" to link to the previous series. When two series are linked, only the first one appears in the legend. Toggling the visibility of this also toggles the linked series.
Example:
1. Linked series
Since
3.0
val maxPointWidth: UndefOr[Double]

The maximum allowed pixel width for a column, translated to the height of a bar in a bar chart.
The maximum allowed pixel width for a column, translated to the height of a bar in a bar chart. This prevents the columns from becoming too wide when there is a small number of points in the chart.
Example:
1. Limited to 50
Since
4.1.8
val minPointLength: UndefOr[Double]

The minimal height for a column or width for a bar.
The minimal height for a column or width for a bar. By default, 0 values are not shown. To visualize a 0 (or close to zero) point, set the minimal point length to a pixel value like 3. In stacked column charts, minPointLength might not be respected for tightly packed values.
Example:
1. Set to three with zero base value, positive and negative close to zero values
final def ne(arg0: AnyRef): Boolean

Definition Classes
AnyRef
val negativeColor: UndefOr[|[String, Object]]

The color for the parts of the graph or points that are below the threshold.
The color for the parts of the graph or points that are below the threshold.
Example:
1. Spline, area and column - arearange.
Since
3.0
final def notify(): Unit

Definition Classes
AnyRef
final def notifyAll(): Unit

Definition Classes
AnyRef
val point: UndefOr[CleanJsObject[PlotOptionsColumnPoint]]

Properties for each single point
val pointDescriptionFormatter: UndefOr[Function]

Same as accessibility.pointDescriptionFormatter, but for an individual series.
Same as accessibility.pointDescriptionFormatter, but for an individual series. Overrides the chart wide configuration.

Since
5.0.12
val pointInterval: UndefOr[Double]

If no x values are given for the points in a series, pointInterval defines the interval of the x values.
If no x values are given for the points in a series, pointInterval defines the interval of the x values. For example, if a series contains one value every decade starting from year 0, set pointInterval to 10.
Since Highcharts 4.1, it can be combined with pointIntervalUnit to draw irregular intervals.
Example:
1. Datetime X axis
val pointIntervalUnit: UndefOr[String]

On datetime series, this allows for setting the pointInterval to irregular time units, day, month and year.
On datetime series, this allows for setting the pointInterval to irregular time units, day, month and year. A day is usually the same as 24 hours, but pointIntervalUnit also takes the DST crossover into consideration when dealing with local time. Combine this option with pointInterval to draw weeks, quarters, 6 months, 10 years etc.
Example:
1. One point a month
Since
4.1.0
val pointPadding: UndefOr[Double]

Padding between each column or bar, in x axis units.
Padding between each column or bar, in x axis units.
Example:
1. 0.1 by default, 0.25, 0 for tightly packed columns,
val pointPlacement: UndefOr[|[String, Double]]

Possible values: null, "on", "between".
Possible values: null, "on", "between".
In a column chart, when pointPlacement is "on", the point will not create any padding of the X axis. In a polar column chart this means that the first column points directly north. If the pointPlacement is "between", the columns will be laid out between ticks. This is useful for example for visualising an amount between two points in time or in a certain sector of a polar chart.
Since Highcharts 3.0.2, the point placement can also be numeric, where 0 is on the axis value, -0.5 is between this value and the previous, and 0.5 is between this value and the next. Unlike the textual options, numeric point placement options won't affect axis padding.
Note that pointPlacement needs a pointRange to work. For column series this is computed, but for line-type series it needs to be set.
Defaults to null in cartesian charts, "between" in polar charts.
Example:
1. Between in a column chart, numeric placement for custom layout.
Since
2.3.0
val pointRange: UndefOr[Double]

The X axis range that each point is valid for.
The X axis range that each point is valid for. This determines the width of the column. On a categorized axis, the range will be 1 by default (one category unit). On linear and datetime axes, the range will be computed as the distance between the two closest data points.
Example:
1. Set the point range to one day on a data set with one week between the points
Since
2.3
val pointStart: UndefOr[Double]

If no x values are given for the points in a series, pointStart defines on what value to start.
If no x values are given for the points in a series, pointStart defines on what value to start. For example, if a series contains one yearly value starting from 1945, set pointStart to 1945.
Example:
1. Linear, datetime X axis
val pointWidth: UndefOr[Double]

A pixel value specifying a fixed width for each column or bar.
A pixel value specifying a fixed width for each column or bar. When null, the width is calculated from the pointPadding and groupPadding.
Example:
1. 20px wide columns regardless of chart width or the amount of data points
Since
1.2.5
def propertyIsEnumerable(v: String): Boolean

Definition Classes
Object
val selected: UndefOr[Boolean]

Whether to select the series initially.
Whether to select the series initially. If showCheckbox is true, the checkbox next to the series name will be checked for a selected series.
Example:
1. One out of two series selected
Since
1.2.0
val shadow: UndefOr[|[Boolean, Object]]

Whether to apply a drop shadow to the graph line.
Whether to apply a drop shadow to the graph line. Since 2.3 the shadow can be an object configuration containing color, offsetX, offsetY, opacity and width.
Example:
1. Shadow enabled
val showCheckbox: UndefOr[Boolean]

If true, a checkbox is displayed next to the legend item to allow selecting the series.
If true, a checkbox is displayed next to the legend item to allow selecting the series. The state of the checkbox is determined by the selected option.
Example:
1. Show select box
Since
1.2.0
val showInLegend: UndefOr[Boolean]

Whether to display this particular series or series type in the legend.
Whether to display this particular series or series type in the legend. The default value is true for standalone series, false for linked series.
Example:
1. One series in the legend, one hidden
val skipKeyboardNavigation: UndefOr[Boolean]

If set to True, the accessibility module will skip past the points in this series for keyboard navigation.
If set to True, the accessibility module will skip past the points in this series for keyboard navigation.

Since
5.0.12
val softThreshold: UndefOr[Boolean]

When this is true, the series will not cause the Y axis to cross the zero plane (or threshold option) unless the data actually crosses the plane.
When this is true, the series will not cause the Y axis to cross the zero plane (or threshold option) unless the data actually crosses the plane.
For example, if softThreshold is false, a series of 0, 1, 2, 3 will make the Y axis show negative values according to the minPadding option. If softThreshold is true, the Y axis starts at 0.

Since
4.1.9
val stacking: UndefOr[String]

Whether to stack the values of each series on top of each other.
Whether to stack the values of each series on top of each other. Possible values are null to disable, "normal" to stack by value or "percent". When stacking is enabled, data must be sorted in ascending X order.
Example:
1. Line, column, bar, area with "normal" stacking. Line, column, bar, area with "percent" stacking.
val states: UndefOr[CleanJsObject[PlotOptionsSeriesStates]]

A wrapper object for all the series options in specific states.
val stickyTracking: UndefOr[Boolean]

Sticky tracking of mouse events.
Sticky tracking of mouse events. When true, the mouseOut event on a series isn't triggered until the mouse moves over another series, or out of the plot area. When false, the mouseOut event on a series is triggered when the mouse leaves the area around the series' graph or markers. This also implies the tooltip. When stickyTracking is false and tooltip.shared is false, the tooltip will be hidden when moving the mouse between series. Defaults to true for line and area type series, but to false for columns, pies etc.
Example:
1. True by default, false
Since
2.0
final def synchronized[T0](arg0: ⇒ T0): T0

Definition Classes
AnyRef
val threshold: UndefOr[Double]

The Y axis value to serve as the base for the columns, for distinguishing between values above and below a threshold.
The Y axis value to serve as the base for the columns, for distinguishing between values above and below a threshold. If null, the columns extend from the padding Y axis minimum.

Since
2.0
def toLocaleString(): String

Definition Classes
Object
def toString(): String

Definition Classes
AnyRef → Any
val tooltip: UndefOr[CleanJsObject[PlotOptionsColumnTooltip]]

A configuration object for the tooltip rendering of each single series.
A configuration object for the tooltip rendering of each single series. Properties are inherited from tooltip, but only the following properties can be defined on a series level.

Since
2.3
val turboThreshold: UndefOr[Double]

When a series contains a data array that is longer than this, only one dimensional arrays of numbers, or two dimensional arrays with x and y values are allowed.
When a series contains a data array that is longer than this, only one dimensional arrays of numbers, or two dimensional arrays with x and y values are allowed. Also, only the first point is tested, and the rest are assumed to be the same format. This saves expensive data checking and indexing in long series. Set it to 0 disable.

Since
2.2
def valueOf(): Any

Definition Classes
Object
val visible: UndefOr[Boolean]

Set the initial visibility of the series.
Set the initial visibility of the series.
Example:
1. Two series, one hidden and one visible
final def wait(): Unit

Definition Classes
AnyRef
Annotations
@throws( ... )
final def wait(arg0: Long, arg1: Int): Unit

Definition Classes
AnyRef
Annotations
@throws( ... )
final def wait(arg0: Long): Unit

Definition Classes
AnyRef
Annotations
@throws( ... )
val zoneAxis: UndefOr[String]

Defines the Axis on which the zones are applied.
Defines the Axis on which the zones are applied.
Example:
1. Zones on the X-Axis
Since
4.1.0
val zones: UndefOr[Array[CleanJsObject[PlotOptionsColumnZones]]]

An array defining zones within a series.
An array defining zones within a series. Zones can be applied to the X axis, Y axis or Z axis for bubbles, according to the zoneAxis option.
In styled mode, the color zones are styled with the .highcharts-zone-{n} class, or custom classed from the className option (view live demo).
Example:
1. Color zones
Since
4.1.0

Related Docs: object PlotOptionsColumn | package config

class PlotOptionsColumn extends Object

Instance Constructors

new PlotOptionsColumn()

Value Members

final def !=(arg0: Any): Boolean

final def ##(): Int

final def ==(arg0: Any): Boolean

val allowPointSelect: UndefOr[Boolean]

val animation: UndefOr[Boolean]

val animationLimit: UndefOr[Double]

final def asInstanceOf[T0]: T0

val borderColor: UndefOr[|[String, Object]]

val borderRadius: UndefOr[Double]

val borderWidth: UndefOr[Double]

val className: UndefOr[String]

def clone(): AnyRef

val color: UndefOr[|[String, Object]]

val colorByPoint: UndefOr[Boolean]

val colorIndex: UndefOr[Double]

val colors: UndefOr[Array[|[String, Object]]]

val crisp: UndefOr[Boolean]

val cropThreshold: UndefOr[Double]

val cursor: UndefOr[String]

val dataLabels: UndefOr[CleanJsObject[PlotOptionsColumnDataLabels]]

val depth: UndefOr[Double]

val description: UndefOr[String]

val edgeColor: UndefOr[|[String, Object]]

val edgeWidth: UndefOr[Double]

val enableMouseTracking: UndefOr[Boolean]

final def eq(arg0: AnyRef): Boolean

def equals(arg0: Any): Boolean

val events: UndefOr[CleanJsObject[PlotOptionsColumnEvents]]

val exposeElementToA11y: UndefOr[Boolean]

def finalize(): Unit

val findNearestPointBy: UndefOr[String]

final def getClass(): Class[_]

val getExtremesFromAll: UndefOr[Boolean]

val groupPadding: UndefOr[Double]

val groupZPadding: UndefOr[Double]

val grouping: UndefOr[Boolean]

def hasOwnProperty(v: String): Boolean

def hashCode(): Int

final def isInstanceOf[T0]: Boolean

def isPrototypeOf(v: Object): Boolean

val keys: UndefOr[Array[String]]

val linkedTo: UndefOr[String]

val maxPointWidth: UndefOr[Double]

val minPointLength: UndefOr[Double]

final def ne(arg0: AnyRef): Boolean

val negativeColor: UndefOr[|[String, Object]]

final def notify(): Unit

final def notifyAll(): Unit

val point: UndefOr[CleanJsObject[PlotOptionsColumnPoint]]

val pointDescriptionFormatter: UndefOr[Function]

val pointInterval: UndefOr[Double]

val pointIntervalUnit: UndefOr[String]

val pointPadding: UndefOr[Double]

val pointPlacement: UndefOr[|[String, Double]]

val pointRange: UndefOr[Double]

val pointStart: UndefOr[Double]

val pointWidth: UndefOr[Double]

def propertyIsEnumerable(v: String): Boolean

val selected: UndefOr[Boolean]

val shadow: UndefOr[|[Boolean, Object]]

val showCheckbox: UndefOr[Boolean]

val showInLegend: UndefOr[Boolean]

val skipKeyboardNavigation: UndefOr[Boolean]

val softThreshold: UndefOr[Boolean]

val stacking: UndefOr[String]

val states: UndefOr[CleanJsObject[PlotOptionsSeriesStates]]

val stickyTracking: UndefOr[Boolean]

final def synchronized[T0](arg0: ⇒ T0): T0

val threshold: UndefOr[Double]

def toLocaleString(): String

def toString(): String

val tooltip: UndefOr[CleanJsObject[PlotOptionsColumnTooltip]]

val turboThreshold: UndefOr[Double]

def valueOf(): Any