Package oshi.hardware

Interface CentralProcessor

All Known Implementing Classes:
AbstractCentralProcessor, OpenBsdCentralProcessor
@ThreadSafe public interface CentralProcessor
This class represents the entire Central Processing Unit (CPU) of a computer system, which may contain one or more physical packages (sockets), one or more physical processors (cores), and one or more logical processors (what the Operating System sees, which may include hyperthreaded cores.)

  • Method Details

    • getProcessorIdentifier

      CentralProcessor.ProcessorIdentifier getProcessorIdentifier()
      The CPU's identifier strings ,including name, vendor, stepping, model, and family information (also called the signature of a CPU).

      The Processor Identifier is primarily associated with Intel-based chips. Attempts are made to provide comparable values for other chip manufacturers.

      Returns:
      a CentralProcessor.ProcessorIdentifier object encapsulating CPU identifier information.

    • getMaxFreq

      long getMaxFreq()
      Maximum frequeny (in Hz), of the logical processors on this CPU.
      Returns:
      The max frequency or -1 if unknown.

    • getCurrentFreq

      long[] getCurrentFreq()
      Attempts to return the current frequency (in Hz), of the logical processors on this CPU.

      May not be implemented on all Operating Systems.

      On Windows, returns an estimate based on the percent of maximum frequency. On Windows systems with more than 64 logical processors, may only return frequencies for the current processor group in the first portion of the array.

      Returns:
      An array of processor frequencies for each logical processor on the system. Use the getLogicalProcessors() to correlate these frequencies with physical packages and processors.

    • getLogicalProcessors

      List<CentralProcessor.LogicalProcessor> getLogicalProcessors()
      Returns an UnmodifiableList of the CPU's logical processors. The list will be sorted in order of increasing NUMA node number, and then processor number. This order is consistent with other methods providing per-processor results.
      Returns:
      An UnmodifiabeList of logical processors.

    • getSystemCpuLoadBetweenTicks

      double getSystemCpuLoadBetweenTicks(long[] oldTicks)
      Returns the "recent cpu usage" for the whole system by counting ticks from getSystemCpuLoadTicks() between the user-provided value from a previous call.
      Parameters:
      oldTicks - A tick array from a previous call to getSystemCpuLoadTicks()
      Returns:
      CPU load between 0 and 1 (100%)

    • getSystemCpuLoadTicks

      long[] getSystemCpuLoadTicks()
      Get System-wide CPU Load tick counters. Returns an array with seven elements representing milliseconds spent in User (0), Nice (1), System (2), Idle (3), IOwait (4), Hardware interrupts (IRQ) (5), Software interrupts/DPC (SoftIRQ) (6), or Steal (7) states. Use CentralProcessor.TickType.getIndex() to retrieve the appropriate index. By measuring the difference between ticks across a time interval, CPU load over that interval may be calculated.

      Note that while tick counters are in units of milliseconds, they may advance in larger increments along with (platform dependent) clock ticks. For example, by default Windows clock ticks are 1/64 of a second (about 15 or 16 milliseconds) and Linux ticks are distribution and configuration dependent but usually 1/100 of a second (10 milliseconds).

      Nice and IOWait information is not available on Windows, and IOwait and IRQ information is not available on macOS, so these ticks will always be zero.

      To calculate overall Idle time using this method, include both Idle and IOWait ticks. Similarly, IRQ, SoftIRQ, and Steal ticks should be added to the System value to get the total. System ticks also include time executing other virtual hosts (steal).

      Returns:
      An array of 7 long values representing time spent in User, Nice, System, Idle, IOwait, IRQ, SoftIRQ, and Steal states.

    • getSystemLoadAverage

      double[] getSystemLoadAverage(int nelem)
      Returns the system load average for the number of elements specified, up to 3, representing 1, 5, and 15 minutes. The system load average is the sum of the number of runnable entities queued to the available processors and the number of runnable entities running on the available processors averaged over a period of time. The way in which the load average is calculated is operating system specific but is typically a damped time-dependent average. If the load average is not available, a negative value is returned. This method is designed to provide a hint about the system load and may be queried frequently.

      The load average may be unavailable on some platforms (e.g., Windows) where it is expensive to implement this method.

      Parameters:
      nelem - Number of elements to return.
      Returns:
      an array of the system load averages for 1, 5, and 15 minutes with the size of the array specified by nelem; or negative values if not available.

    • getProcessorCpuLoadBetweenTicks

      double[] getProcessorCpuLoadBetweenTicks(long[][] oldTicks)
      Returns the "recent cpu usage" for all logical processors by counting ticks from getProcessorCpuLoadTicks() between the user-provided value from a previous call.
      Parameters:
      oldTicks - A tick array from a previous call to getProcessorCpuLoadTicks()
      Returns:
      array of CPU load between 0 and 1 (100%) for each logical processor

    • getProcessorCpuLoadTicks

      long[][] getProcessorCpuLoadTicks()
      Get Processor CPU Load tick counters. Returns a two dimensional array, with getLogicalProcessorCount() arrays, each containing seven elements representing milliseconds spent in User (0), Nice (1), System (2), Idle (3), IOwait (4), Hardware interrupts (IRQ) (5), Software interrupts/DPC (SoftIRQ) (6), or Steal (7) states. Use CentralProcessor.TickType.getIndex() to retrieve the appropriate index. By measuring the difference between ticks across a time interval, CPU load over that interval may be calculated.

      Note that while tick counters are in units of milliseconds, they may advance in larger increments along with (platform dependent) clock ticks. For example, by default Windows clock ticks are 1/64 of a second (about 15 or 16 milliseconds) and Linux ticks are distribution and configuration dependent but usually 1/100 of a second (10 milliseconds).

      Nice and IOwait per processor information is not available on Windows, and IOwait and IRQ information is not available on macOS, so these ticks will always be zero.

      To calculate overall Idle time using this method, include both Idle and IOWait ticks. Similarly, IRQ, SoftIRQ and Steal ticks should be added to the System value to get the total. System ticks also include time executing other virtual hosts (steal).

      Returns:
      A 2D array of logicalProcessorCount x 7 long values representing time spent in User, Nice, System, Idle, IOwait, IRQ, SoftIRQ, and Steal states.

    • getLogicalProcessorCount

      int getLogicalProcessorCount()
      Get the number of logical CPUs available for processing. This value may be higher than physical CPUs if hyperthreading is enabled.
      Returns:
      The number of logical CPUs available.

    • getPhysicalProcessorCount

      int getPhysicalProcessorCount()
      Get the number of physical CPUs/cores available for processing.
      Returns:
      The number of physical CPUs available.

    • getPhysicalPackageCount

      int getPhysicalPackageCount()
      Get the number of packages/sockets in the system. A single package may contain multiple cores.
      Returns:
      The number of physical packages available.

    • getContextSwitches

      long getContextSwitches()
      Get the number of system-wide context switches which have occurred.

      Not available system-wide on macOS. Process- and Thread-level context switches are available from OSProcess.getContextSwitches() and OSThread.getContextSwitches().

      Returns:
      The number of context switches, if this information is available; 0 otherwise.

    • getInterrupts

      long getInterrupts()
      Get the number of system-wide interrupts which have occurred.

      Not available system-wide on macOS.

      Returns:
      The number of interrupts, if this information is available; 0 otherwise.