SpinalEnumCraft
Related Doc:
package core
Concatenation between two signals
Concatenation between two signals
Standard hardware assignment, equivalent to <= in VHDL/Verilog
Standard hardware assignment, equivalent to <= in VHDL/Verilog
Automatic connection between two hardware signals or two bundles of the same type.
Automatic connection between two hardware signals or two bundles of the same type.
Direction is inferred by using signal direction (in/out). (Similar behavior to :=)
isNotEqualTo comparison between two SpinalHDL data
isNotEqualTo comparison between two SpinalHDL data
isEqualTo comparison between two SpinalHDL data
isEqualTo comparison between two SpinalHDL data
Use as \= to have the same behavioral as VHDL variable
Use as \= to have the same behavioral as VHDL variable
Allow a signal of an io Bundle to be directionless.
Allow a signal of an io Bundle to be directionless.
Allow a signal to be overridden.
Allow a signal to be overridden.
Allow a register to be partially assigned
Allow a register to be partially assigned
Allow a register to have only an init (no assignments)
Allow a register to have only an init (no assignments)
Cast signal to Bits
Cast signal to Bits
Set a signal as inout
Set a data as input
Set a data as output
Set a default value to a signal.
Set a default value to a signal.
Flip the direction of the signal.
Flip the direction of the signal.
in and out are swapped, inout stay the same.
For a register, get the value it will have at the next clock, as a combinational signal.
Return the width of the data
Return the width of the data
Get current component with all parents
Get current component with all parents
Create a signal set to 0
Create a signal set to 0
Does the base type have initial value
Does the base type have initial value
Set initial value of the signal
Set initial value of the signal
Is the baseType a node
Is the baseType a node
Is the basetype using reset signal
Is the basetype using reset signal
Is the basetype using soft reset signal
Is the basetype using soft reset signal
Check if the baseType is vital
Check if the baseType is vital
Use a SpinalHDL data as a selector for a mux.
Use a SpinalHDL data as a selector for a mux.
Version of SpinalHDL mux that allows Don't Care.
Version of SpinalHDL mux that allows Don't Care.
Use a scala.Seq of SpinalHDL data as mux inputs.
Use a scala.Seq of SpinalHDL data as mux inputs.
Use a scala.Seq of SpinalHDL data as mux inputs.
Use a scala.Seq of SpinalHDL data as mux inputs.
Version of SpinalHDL muxList that allows Don't Care.
Version of SpinalHDL muxList that allows Don't Care.
Put the combinatorial logic driving this signal in a separate process
Put the combinatorial logic driving this signal in a separate process
Disable combinatorial loop checking for this Data
Disable combinatorial loop checking for this Data
Pull a signal to the top level (use for debugging)
Pull a signal to the top level (use for debugging)
Useful for register that doesn't need a reset value in RTL, but need a random value for simulation (avoid x-propagation)
Useful for register that doesn't need a reset value in RTL, but need a random value for simulation (avoid x-propagation)
Remove all assignments of the base type
Return a version of the signal which is allowed to be automatically resized where needed.
Return a version of the signal which is allowed to be automatically resized where needed.
The resize operation is deferred until the point of assignment later. The resize may widen or truncate, retaining the LSB.
root interface
root interface
Set baseType to Combinatorial
Remove the direction (in, out, inout) to a signal
Set baseType to reg
Set baseType to Node
Set baseType to Node
Set the baseType to vital
Set the baseType to vital
Recursively set baseType to reg only for output
Recursively set baseType to reg only for output
(Since version ???) Use =/= instead
(Since version ???) use setAsDirectionLess instead
(Since version ) see corresponding Javadoc for more information.
Generate this if condition is true
Generate this if condition is true
does not work with <>, use 'someBool generate Type()' or 'if(condition) Type() else null' instead
Hardware representation of an enumeration