Constructor Detail

Method Detail

• id

   final Run.Builder id(String id)

  The identifier, which can be referenced in API endpoints.

• id

   final Run.Builder id(JsonField<String> id)

  Sets Builder.id to an arbitrary JSON value.

  You should usually call Builder.id with a well-typed String value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• assistantId

   final Run.Builder assistantId(String assistantId)

  The ID of the assistant used for execution of this run.

• assistantId

   final Run.Builder assistantId(JsonField<String> assistantId)

  Sets Builder.assistantId to an arbitrary JSON value.

  You should usually call Builder.assistantId with a well-typed String value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• cancelledAt

   final Run.Builder cancelledAt(Long cancelledAt)

  The Unix timestamp (in seconds) for when the run was cancelled.

• cancelledAt

   final Run.Builder cancelledAt(Long cancelledAt)

  Alias for Builder.cancelledAt.

  This unboxed primitive overload exists for backwards compatibility.

• cancelledAt

   final Run.Builder cancelledAt(Optional<Long> cancelledAt)

  Alias for calling Builder.cancelledAt with cancelledAt.orElse(null).

• cancelledAt

   final Run.Builder cancelledAt(JsonField<Long> cancelledAt)

  Sets Builder.cancelledAt to an arbitrary JSON value.

  You should usually call Builder.cancelledAt with a well-typed Long value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• completedAt

   final Run.Builder completedAt(Long completedAt)

  The Unix timestamp (in seconds) for when the run was completed.

• completedAt

   final Run.Builder completedAt(Long completedAt)

  Alias for Builder.completedAt.

  This unboxed primitive overload exists for backwards compatibility.

• completedAt

   final Run.Builder completedAt(Optional<Long> completedAt)

  Alias for calling Builder.completedAt with completedAt.orElse(null).

• completedAt

   final Run.Builder completedAt(JsonField<Long> completedAt)

  Sets Builder.completedAt to an arbitrary JSON value.

  You should usually call Builder.completedAt with a well-typed Long value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• createdAt

   final Run.Builder createdAt(Long createdAt)

  The Unix timestamp (in seconds) for when the run was created.

• createdAt

   final Run.Builder createdAt(JsonField<Long> createdAt)

  Sets Builder.createdAt to an arbitrary JSON value.

  You should usually call Builder.createdAt with a well-typed Long value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• expiresAt

   final Run.Builder expiresAt(Long expiresAt)

  The Unix timestamp (in seconds) for when the run will expire.

• expiresAt

   final Run.Builder expiresAt(Long expiresAt)

  Alias for Builder.expiresAt.

  This unboxed primitive overload exists for backwards compatibility.

• expiresAt

   final Run.Builder expiresAt(Optional<Long> expiresAt)

  Alias for calling Builder.expiresAt with expiresAt.orElse(null).

• expiresAt

   final Run.Builder expiresAt(JsonField<Long> expiresAt)

  Sets Builder.expiresAt to an arbitrary JSON value.

  You should usually call Builder.expiresAt with a well-typed Long value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• failedAt

   final Run.Builder failedAt(Long failedAt)

  The Unix timestamp (in seconds) for when the run failed.

• failedAt

   final Run.Builder failedAt(Long failedAt)

  Alias for Builder.failedAt.

  This unboxed primitive overload exists for backwards compatibility.

• failedAt

   final Run.Builder failedAt(Optional<Long> failedAt)

  Alias for calling Builder.failedAt with failedAt.orElse(null).

• failedAt

   final Run.Builder failedAt(JsonField<Long> failedAt)

  Sets Builder.failedAt to an arbitrary JSON value.

  You should usually call Builder.failedAt with a well-typed Long value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• incompleteDetails

   final Run.Builder incompleteDetails(Run.IncompleteDetails incompleteDetails)

  Details on why the run is incomplete. Will be null if the run is not incomplete.

• incompleteDetails

   final Run.Builder incompleteDetails(Optional<Run.IncompleteDetails> incompleteDetails)

  Alias for calling Builder.incompleteDetails with incompleteDetails.orElse(null).

• incompleteDetails

   final Run.Builder incompleteDetails(JsonField<Run.IncompleteDetails> incompleteDetails)

  Sets Builder.incompleteDetails to an arbitrary JSON value.

  You should usually call Builder.incompleteDetails with a well-typed IncompleteDetails value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• instructions

   final Run.Builder instructions(String instructions)

  The instructions that the assistant used for this run.

• instructions

   final Run.Builder instructions(JsonField<String> instructions)

  Sets Builder.instructions to an arbitrary JSON value.

  You should usually call Builder.instructions with a well-typed String value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• lastError

   final Run.Builder lastError(Run.LastError lastError)

  The last error associated with this run. Will be null if there are no errors.

• lastError

   final Run.Builder lastError(Optional<Run.LastError> lastError)

  Alias for calling Builder.lastError with lastError.orElse(null).

• lastError

   final Run.Builder lastError(JsonField<Run.LastError> lastError)

  Sets Builder.lastError to an arbitrary JSON value.

  You should usually call Builder.lastError with a well-typed LastError value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• maxCompletionTokens

   final Run.Builder maxCompletionTokens(Long maxCompletionTokens)

  The maximum number of completion tokens specified to have been used over the course of the run.

• maxCompletionTokens

   final Run.Builder maxCompletionTokens(Long maxCompletionTokens)

  Alias for Builder.maxCompletionTokens.

  This unboxed primitive overload exists for backwards compatibility.

• maxCompletionTokens

   final Run.Builder maxCompletionTokens(Optional<Long> maxCompletionTokens)

  Alias for calling Builder.maxCompletionTokens with maxCompletionTokens.orElse(null).

• maxCompletionTokens

   final Run.Builder maxCompletionTokens(JsonField<Long> maxCompletionTokens)

  Sets Builder.maxCompletionTokens to an arbitrary JSON value.

  You should usually call Builder.maxCompletionTokens with a well-typed Long value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• maxPromptTokens

   final Run.Builder maxPromptTokens(Long maxPromptTokens)

  The maximum number of prompt tokens specified to have been used over the course of the run.

• maxPromptTokens

   final Run.Builder maxPromptTokens(Long maxPromptTokens)

  Alias for Builder.maxPromptTokens.

  This unboxed primitive overload exists for backwards compatibility.

• maxPromptTokens

   final Run.Builder maxPromptTokens(Optional<Long> maxPromptTokens)

  Alias for calling Builder.maxPromptTokens with maxPromptTokens.orElse(null).

• maxPromptTokens

   final Run.Builder maxPromptTokens(JsonField<Long> maxPromptTokens)

  Sets Builder.maxPromptTokens to an arbitrary JSON value.

  You should usually call Builder.maxPromptTokens with a well-typed Long value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• metadata

   final Run.Builder metadata(Run.Metadata metadata)

  Set of 16 key-value pairs that can be attached to an object. This can be useful for storing additional information about the object in a structured format, and querying for objects via API or the dashboard.

  Keys are strings with a maximum length of 64 characters. Values are strings with a maximum length of 512 characters.

• metadata

   final Run.Builder metadata(Optional<Run.Metadata> metadata)

  Alias for calling Builder.metadata with metadata.orElse(null).

• metadata

   final Run.Builder metadata(JsonField<Run.Metadata> metadata)

  Sets Builder.metadata to an arbitrary JSON value.

  You should usually call Builder.metadata with a well-typed Metadata value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• model

   final Run.Builder model(String model)

  The model that the assistant used for this run.

• model

   final Run.Builder model(JsonField<String> model)

  Sets Builder.model to an arbitrary JSON value.

  You should usually call Builder.model with a well-typed String value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• object_

   final Run.Builder object_(JsonValue object_)

  Sets the field to an arbitrary JSON value.

  It is usually unnecessary to call this method because the field defaults to the following:

  JsonValue.from("thread.run")

  This method is primarily for setting the field to an undocumented or not yet supported value.

• parallelToolCalls

   final Run.Builder parallelToolCalls(Boolean parallelToolCalls)

  Whether to enable parallel function calling during tool use.

• parallelToolCalls

   final Run.Builder parallelToolCalls(JsonField<Boolean> parallelToolCalls)

  Sets Builder.parallelToolCalls to an arbitrary JSON value.

  You should usually call Builder.parallelToolCalls with a well-typed Boolean value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• requiredAction

   final Run.Builder requiredAction(Run.RequiredAction requiredAction)

  Details on the action required to continue the run. Will be null if no action is required.

• requiredAction

   final Run.Builder requiredAction(Optional<Run.RequiredAction> requiredAction)

  Alias for calling Builder.requiredAction with requiredAction.orElse(null).

• requiredAction

   final Run.Builder requiredAction(JsonField<Run.RequiredAction> requiredAction)

  Sets Builder.requiredAction to an arbitrary JSON value.

  You should usually call Builder.requiredAction with a well-typed RequiredAction value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• responseFormat

   final Run.Builder responseFormat(AssistantResponseFormatOption responseFormat)

  Specifies the format that the model must output. Compatible with GPT-4o, GPT-4 * Turbo, and all GPT-3.5 Turbo models since gpt-3.5-turbo-1106.

  Setting to { "type": "json_schema", "json_schema": {...} } enables Structured Outputs which ensures the model will match your supplied JSON schema. Learn more in the Structured Outputs guide.

  Setting to { "type": "json_object" } enables JSON mode, which ensures the message the model generates is valid JSON.

  Important: when using JSON mode, you must also instruct the model to produce JSON yourself via a system or user message. Without this, the model may generate an unending stream of whitespace until the generation reaches the token limit, resulting in a long-running and seemingly "stuck" request. Also note that the message content may be partially cut off if finish_reason="length", which indicates the generation exceeded max_tokens or the conversation exceeded the max context length.

• responseFormat

   final Run.Builder responseFormat(Optional<AssistantResponseFormatOption> responseFormat)

  Alias for calling Builder.responseFormat with responseFormat.orElse(null).

• responseFormat

   final Run.Builder responseFormat(JsonField<AssistantResponseFormatOption> responseFormat)

  Sets Builder.responseFormat to an arbitrary JSON value.

  You should usually call Builder.responseFormat with a well-typed AssistantResponseFormatOption value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• responseFormat

   final Run.Builder responseFormat(ResponseFormatText responseFormatText)

  Alias for calling responseFormat with AssistantResponseFormatOption.ofResponseFormatText(responseFormatText).

• responseFormat

   final Run.Builder responseFormat(ResponseFormatJsonObject responseFormatJsonObject)

  Alias for calling responseFormat with AssistantResponseFormatOption.ofResponseFormatJsonObject(responseFormatJsonObject).

• responseFormat

   final Run.Builder responseFormat(ResponseFormatJsonSchema responseFormatJsonSchema)

  Alias for calling responseFormat with AssistantResponseFormatOption.ofResponseFormatJsonSchema(responseFormatJsonSchema).

• responseFormatAuto

   final Run.Builder responseFormatAuto()

  Alias for calling responseFormat with AssistantResponseFormatOption.ofAuto().

• startedAt

   final Run.Builder startedAt(Long startedAt)

  The Unix timestamp (in seconds) for when the run was started.

• startedAt

   final Run.Builder startedAt(Long startedAt)

  Alias for Builder.startedAt.

  This unboxed primitive overload exists for backwards compatibility.

• startedAt

   final Run.Builder startedAt(Optional<Long> startedAt)

  Alias for calling Builder.startedAt with startedAt.orElse(null).

• startedAt

   final Run.Builder startedAt(JsonField<Long> startedAt)

  Sets Builder.startedAt to an arbitrary JSON value.

  You should usually call Builder.startedAt with a well-typed Long value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• status

   final Run.Builder status(RunStatus status)

  The status of the run, which can be either queued, in_progress, requires_action, cancelling, cancelled, failed, completed, incomplete, or expired.

• status

   final Run.Builder status(JsonField<RunStatus> status)

  Sets Builder.status to an arbitrary JSON value.

  You should usually call Builder.status with a well-typed RunStatus value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• threadId

   final Run.Builder threadId(String threadId)

  The ID of the thread that was executed on as a part of this run.

• threadId

   final Run.Builder threadId(JsonField<String> threadId)

  Sets Builder.threadId to an arbitrary JSON value.

  You should usually call Builder.threadId with a well-typed String value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• toolChoice

   final Run.Builder toolChoice(AssistantToolChoiceOption toolChoice)

  Controls which (if any) tool is called by the model. none means the model will not call any tools and instead generates a message. auto is the default value and means the model can pick between generating a message or calling one or more tools. required means the model must call one or more tools before responding to the user. Specifying a particular tool like {"type": "file_search"} or {"type": "function", "function": {"name": "my_function"}} forces the model to call that tool.

• toolChoice

   final Run.Builder toolChoice(Optional<AssistantToolChoiceOption> toolChoice)

  Alias for calling Builder.toolChoice with toolChoice.orElse(null).

• toolChoice

   final Run.Builder toolChoice(JsonField<AssistantToolChoiceOption> toolChoice)

  Sets Builder.toolChoice to an arbitrary JSON value.

  You should usually call Builder.toolChoice with a well-typed AssistantToolChoiceOption value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• toolChoice

   final Run.Builder toolChoice(AssistantToolChoiceOption.Auto auto)

  Alias for calling toolChoice with AssistantToolChoiceOption.ofAuto(auto).

• toolChoice

   final Run.Builder toolChoice(AssistantToolChoice assistantToolChoice)

  Alias for calling toolChoice with AssistantToolChoiceOption.ofAssistantToolChoice(assistantToolChoice).

• tools

   final Run.Builder tools(List<AssistantTool> tools)

  The list of tools that the assistant used for this run.

• tools

   final Run.Builder tools(JsonField<List<AssistantTool>> tools)

  Sets Builder.tools to an arbitrary JSON value.

  You should usually call Builder.tools with a well-typed List<AssistantTool> value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• addTool

   final Run.Builder addTool(AssistantTool tool)

  Adds a single AssistantTool to tools.

• addTool

   final Run.Builder addTool(CodeInterpreterTool codeInterpreter)

  Alias for calling addTool with AssistantTool.ofCodeInterpreter(codeInterpreter).

• addTool

   final Run.Builder addTool(FileSearchTool fileSearch)

  Alias for calling addTool with AssistantTool.ofFileSearch(fileSearch).

• addTool

   final Run.Builder addTool(FunctionTool function)

  Alias for calling addTool with AssistantTool.ofFunction(function).

• addFunctionTool

   final Run.Builder addFunctionTool(FunctionDefinition function)

  Alias for calling addTool with the following:

  FunctionTool.builder()
      .function(function)
      .build()

• truncationStrategy

   final Run.Builder truncationStrategy(Run.TruncationStrategy truncationStrategy)

  Controls for how a thread will be truncated prior to the run. Use this to control the intial context window of the run.

• truncationStrategy

   final Run.Builder truncationStrategy(Optional<Run.TruncationStrategy> truncationStrategy)

  Alias for calling Builder.truncationStrategy with truncationStrategy.orElse(null).

• truncationStrategy

   final Run.Builder truncationStrategy(JsonField<Run.TruncationStrategy> truncationStrategy)

  Sets Builder.truncationStrategy to an arbitrary JSON value.

  You should usually call Builder.truncationStrategy with a well-typed TruncationStrategy value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• usage

   final Run.Builder usage(Run.Usage usage)

  Usage statistics related to the run. This value will be null if the run is not in a terminal state (i.e. in_progress, queued, etc.).

• usage

   final Run.Builder usage(Optional<Run.Usage> usage)

  Alias for calling Builder.usage with usage.orElse(null).

• usage

   final Run.Builder usage(JsonField<Run.Usage> usage)

  Sets Builder.usage to an arbitrary JSON value.

  You should usually call Builder.usage with a well-typed Usage value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• temperature

   final Run.Builder temperature(Double temperature)

  The sampling temperature used for this run. If not set, defaults to 1.

• temperature

   final Run.Builder temperature(Double temperature)

  Alias for Builder.temperature.

  This unboxed primitive overload exists for backwards compatibility.

• temperature

   final Run.Builder temperature(Optional<Double> temperature)

  Alias for calling Builder.temperature with temperature.orElse(null).

• temperature

   final Run.Builder temperature(JsonField<Double> temperature)

  Sets Builder.temperature to an arbitrary JSON value.

  You should usually call Builder.temperature with a well-typed Double value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• topP

   final Run.Builder topP(Double topP)

  The nucleus sampling value used for this run. If not set, defaults to 1.

• topP

   final Run.Builder topP(Double topP)

  Alias for Builder.topP.

  This unboxed primitive overload exists for backwards compatibility.

• topP

   final Run.Builder topP(Optional<Double> topP)

  Alias for calling Builder.topP with topP.orElse(null).

• topP

   final Run.Builder topP(JsonField<Double> topP)

  Sets Builder.topP to an arbitrary JSON value.

  You should usually call Builder.topP with a well-typed Double value instead. This method is primarily for setting the field to an undocumented or not yet supported value.

• additionalProperties

   final Run.Builder additionalProperties(Map<String, JsonValue> additionalProperties)

• putAdditionalProperty

   final Run.Builder putAdditionalProperty(String key, JsonValue value)

• putAllAdditionalProperties

   final Run.Builder putAllAdditionalProperties(Map<String, JsonValue> additionalProperties)

• removeAdditionalProperty

   final Run.Builder removeAdditionalProperty(String key)

• removeAllAdditionalProperties

   final Run.Builder removeAllAdditionalProperties(Set<String> keys)

• build

   final Run build()

  Returns an immutable instance of Run.

  Further updates to this Builder will not mutate the returned instance.

  The following fields are required:

  .id()
  .assistantId()
  .cancelledAt()
  .completedAt()
  .createdAt()
  .expiresAt()
  .failedAt()
  .incompleteDetails()
  .instructions()
  .lastError()
  .maxCompletionTokens()
  .maxPromptTokens()
  .metadata()
  .model()
  .parallelToolCalls()
  .requiredAction()
  .responseFormat()
  .startedAt()
  .status()
  .threadId()
  .toolChoice()
  .tools()
  .truncationStrategy()
  .usage()