| ActivePowerLimits |
|
| ActivePowerLimitsAdder |
|
| ApparentPowerLimits |
|
| ApparentPowerLimitsAdder |
|
| Battery |
A battery system.
|
| BatteryAdder |
To create a battery, from a VoltageLevel instance call
the VoltageLevel.newBattery() method to get a battery builder
instance. |
| Boundary |
|
| Branch<I extends Branch<I>> |
An equipment with two terminals.
|
| Branch.Overload |
Represents a current overload on a Branch. |
| BranchAdder<T extends BranchAdder> |
|
| Bus |
A bus is a set of equipments connected together through a closed switch.
|
| BusAdder |
|
| BusbarSection |
A busbar section, a non impedant element used in a node/breaker substation
topology to connect equipments.
|
| BusbarSectionAdder |
|
| BusRef |
|
| Component |
A set of connected bus in the network.
|
| Connectable<I extends Connectable<I>> |
An equipment that is part of a substation topology.
|
| Container<I extends Identifiable<I>> |
|
| CurrentLimits |
Current limits are defined by:
A permanent limit (A)
Any number of temporary limits.
|
| CurrentLimitsAdder |
|
| DanglingLine |
A dangling line to model boundaries (X nodes).
|
| DanglingLine.Generation |
|
| DanglingLineAdder |
|
| DanglingLineAdder.GenerationAdder |
|
| Exporter |
This is the base class for all IIDM exporters.
|
| ExportersLoader |
|
| FlowsLimitsHolder |
|
| Generator |
A power generator.
|
| GeneratorAdder |
|
| HvdcConverterStation<T extends HvdcConverterStation<T>> |
HVDC converter station.
|
| HvdcConverterStationAdder<T extends HvdcConverterStationAdder> |
HVDC converter station builder and adder.
|
| HvdcLine |
A HVDC line connected to two HVDC converters on DC side.
|
| HvdcLineAdder |
HVDC line builder and adder.
|
| Identifiable<I extends Identifiable<I>> |
An object that is part of the network model and that is identified uniquely
by a String id.
|
| IdentifiableAdder<T extends IdentifiableAdder> |
|
| Importer |
This is the base class for all IIDM importers.
|
| ImportersLoader |
|
| ImportPostProcessor |
|
| Injection<I extends Injection<I>> |
A equipment with one terminal.
|
| InjectionAdder<T extends InjectionAdder> |
|
| LccConverterStation |
LCC converter station.
|
| LccConverterStationAdder |
LCC converter station builder and adder.
|
| LccFilter |
Harmonic filter.
|
| LccFilterAdder |
|
| Line |
An AC line.
|
| LineAdder |
To create a new AC line, from a Network instance call the
Network.newLine() method to get a line builder instance. |
| LineCharacteristics<T> |
|
| Load |
A constant power load (fixed p0 and q0).
|
| LoadAdder |
To create a load, from a VoltageLevel instance call
the VoltageLevel.newLoad() method to get a load builder
instance. |
| LoadingLimits |
|
| LoadingLimits.TemporaryLimit |
Temporary current limit.
|
| LoadingLimitsAdder<L extends LoadingLimits,A extends LoadingLimitsAdder<L,A>> |
|
| LoadingLimitsAdder.TemporaryLimitAdder<A> |
|
| MinMaxReactiveLimits |
Generator reactive limits that does not depend of the active
power.
|
| MinMaxReactiveLimitsAdder |
|
| Network |
A power network model.
|
| Network.BusBreakerView |
A global bus/breaker view of the network.
|
| Network.BusView |
A global bus view of the network.
|
| Network.PrettyNetworkFactory |
Just being able to name method create et not createNetwork.
|
| NetworkFactory |
|
| NetworkFactoryService |
|
| NetworkListener |
|
| OperationalLimits |
|
| OperationalLimitsAdder<L extends OperationalLimits,A extends OperationalLimitsAdder<L,A>> |
|
| PhaseTapChanger |
A phase tap changer that is associated to a transformer to control the phase.
|
| PhaseTapChangerAdder |
|
| PhaseTapChangerAdder.StepAdder |
|
| PhaseTapChangerHolder |
|
| PhaseTapChangerStep |
|
| RatioTapChanger |
A ratio tap changer that is associated to a transformer to control the voltage.
|
| RatioTapChangerAdder |
|
| RatioTapChangerAdder.StepAdder |
|
| RatioTapChangerHolder |
|
| RatioTapChangerStep |
|
| ReactiveCapabilityCurve |
A reactive capability curve to define reactive limits of a Generator
or Battery that depends of the active power.
|
| ReactiveCapabilityCurve.Point |
A point of the reactive capability curve, for a given active power the
minimal and the maximal value for the reactive power.
|
| ReactiveCapabilityCurveAdder |
|
| ReactiveCapabilityCurveAdder.PointAdder |
|
| ReactiveLimits |
Base class for Generator reactive limits.
|
| ReactiveLimitsHolder |
|
| ShuntCompensator |
A shunt compensator.
|
| ShuntCompensatorAdder |
|
| ShuntCompensatorLinearModel |
|
| ShuntCompensatorLinearModelAdder |
|
| ShuntCompensatorModel |
|
| ShuntCompensatorNonLinearModel |
|
| ShuntCompensatorNonLinearModel.Section |
|
| ShuntCompensatorNonLinearModelAdder |
|
| ShuntCompensatorNonLinearModelAdder.SectionAdder |
|
| StaticVarCompensator |
Static VAR compensator model.
|
| StaticVarCompensatorAdder |
|
| Substation |
A substation is a collection of equipments located at a the same geographical
site.
|
| SubstationAdder |
To create a substation, from a Network instance call
the Network.newSubstation() method to get a substation builder
instance. |
| Switch |
A switch to connect equipments in a substation.
|
| TapChanger<C extends TapChanger<C,S>,S extends TapChangerStep<S>> |
|
| TapChangerStep<S extends TapChangerStep> |
|
| Terminal |
An equipment connection point in a substation topology.
|
| Terminal.BusBreakerView |
A bus/breaker view of the terminal.
|
| Terminal.BusView |
A bus view of the terminal.
|
| Terminal.NodeBreakerView |
A node/breaker view of the terminal.
|
| Terminal.TopologyTraverser |
Topology traversal handler
|
| ThreeWindingsTransformer |
A Three Windings Power Transformer.
|
| ThreeWindingsTransformer.Leg |
Transformer leg
|
| ThreeWindingsTransformerAdder |
|
| ThreeWindingsTransformerAdder.LegAdder |
|
| TieLine |
A tie line is an AC line sharing power between two neighbouring regional grids.
|
| TieLine.HalfLine |
Half line
|
| TieLineAdder |
|
| TieLineAdder.HalfLineAdder |
|
| TopologyVisitor |
|
| TwoWindingsTransformer |
A two windings power transformer.
|
| TwoWindingsTransformerAdder |
|
| Validable |
|
| VariantManager |
This class provides methods to manage variants of the network (create and
remove a variant, set the working variant, etc).
|
| VoltageLevel |
A voltage level is a collection of equipments located in the same substation
and at the same base voltage.
|
| VoltageLevel.BusBreakerView |
A bus/breaker view of the topology.
|
| VoltageLevel.BusBreakerView.SwitchAdder |
|
| VoltageLevel.BusBreakerView.TopologyTraverser |
|
| VoltageLevel.BusView |
A bus view of the substation topology.
|
| VoltageLevel.NodeBreakerView |
A node/breaker view of the topology.
|
| VoltageLevel.NodeBreakerView.InternalConnection |
|
| VoltageLevel.NodeBreakerView.InternalConnectionAdder |
|
| VoltageLevel.NodeBreakerView.SwitchAdder |
|
| VoltageLevel.NodeBreakerView.TopologyTraverser |
|
| VoltageLevelAdder |
|
| VscConverterStation |
VSC converter station.
|
| VscConverterStationAdder |
VSC converter station builder and adder.
|