All Implemented Interfaces:
Serializable
Direct Known Subclasses:
XAxis, YAxis, ZAxis

public abstract class Axis extends AbstractConfigurationObject
See Also:
  • Field Details

  • Constructor Details

    • Axis

      public Axis()
  • Method Details

    • setAxisIndex

      public void setAxisIndex(int i)
    • getAxisIndex

      protected Integer getAxisIndex()
    • getMin

      public Number getMin()
      Returns:
      the minimum value of the axis or null
      See Also:
    • setMin

      public void setMin(Number min)
      The minimum value of the axis. If null the min value is automatically calculated. If the startOnTick option is true, the min value might be rounded down.
      Parameters:
      min -
    • setMin

      public void setMin(Date min)
      The minimum value of the axis as Date.
      Parameters:
      min -
      See Also:
    • getMax

      public Number getMax()
      Returns:
      Maximum value of axis or null
      See Also:
    • setMax

      public void setMax(Number max)
      The maximum value of the axis. If null, the max value is automatically calculated. If the endOnTick option is true, the max value might be rounded up. The actual maximum value is also influenced by chart.alignTicks.
      Parameters:
      max -
    • setMax

      public void setMax(Date max)
      The maximum value of the axis as Date.
      Parameters:
      max -
      See Also:
    • setExtremes

      public void setExtremes(Number min, Number max)
      Sets the minimum and maximum of the axes after rendering has finished. If the startOnTick and endOnTick options are true, the minimum and maximum values are rounded off to the nearest tick. To prevent this, these options can be set to false before calling setExtremes.
      Parameters:
      min - The new minimum value
      max - The new maximum value
    • setExtremes

      public void setExtremes(Date min, Date max)
      The minimum and maximum value of the axis as Date.
      See Also:
    • setExtremes

      public void setExtremes(Number min, Number max, boolean redraw)
      Sets the extremes at runtime.
      Parameters:
      min - Minimum.
      max - Maximum.
      redraw - Whether or not to redraw the chart.
    • setExtremes

      public void setExtremes(Date min, Date max, boolean redraw)
      The minimum and maximum value of the axis as Date.
      See Also:
    • setExtremes

      public void setExtremes(Number minimum, Number maximum, boolean redraw, boolean animate)
      Run-time modification of the axis extremes.
      Parameters:
      minimum - New minimum value.
      maximum - New maximum value.
      redraw - Whether or not to redraw the chart.
      animate - Whether or not to animate the rescaling.
    • setExtremes

      public void setExtremes(Date minimum, Date maximum, boolean redraw, boolean animate)
      The minimum and maximum value of the axis as Date.
      See Also:
    • getConfiguration

      public ChartConfiguration getConfiguration()
      Returns the configuration this axis is bound to.
      Returns:
      The configuration.
    • setConfiguration

      public void setConfiguration(ChartConfiguration configuration)
      Sets the configuration this axis is bound to. This method is automatically called by configuration, when the axis is added to it.
      Parameters:
      configuration - Configuration this object is linked to.
    • getAllowDecimals

      public abstract Boolean getAllowDecimals()
      See Also:
    • setAllowDecimals

      public abstract void setAllowDecimals(Boolean allowDecimals)
      Whether to allow decimals in this axis' ticks. When counting integers, like persons or hits on a web page, decimals must be avoided in the axis tick labels.
    • getAlternateGridColor

      public abstract Color getAlternateGridColor()
      See Also:
    • setAlternateGridColor

      public abstract void setAlternateGridColor(Color alternateGridColor)
      When using an alternate grid color, a band is painted across the plot area between every other grid line.
    • getCategories

      public abstract String[] getCategories()
      See Also:
    • setCategories

      public abstract void setCategories(String... categories)

      If categories are present for the axis, names are used instead of numbers for that axis. Since Highcharts 3.0, categories can also be extracted by giving each point a name and setting axis type to category. However, if you have multiple series, best practice remains defining the categories array.

      Example:

       categories: ['Apples', 'Bananas', 'Oranges']
       

    • addCategory

      public abstract void addCategory(String category)
      Adds category to the categories array
      Parameters:
      category - to add
      See Also:
    • removeCategory

      public abstract void removeCategory(String category)
      Removes first occurrence of category in categories array
      Parameters:
      category - to remove
      See Also:
    • getCeiling

      public abstract Number getCeiling()
      See Also:
    • setCeiling

      public abstract void setCeiling(Number ceiling)
      The highest allowed value for automatically computed axis extremes.
    • getClassName

      public abstract String getClassName()
      See Also:
    • setClassName

      public abstract void setClassName(String className)
      A class name that opens for styling the axis by CSS.
    • getCrosshair

      public abstract Crosshair getCrosshair()
      See Also:
    • setCrosshair

      public abstract void setCrosshair(Crosshair crosshair)
      Configure a crosshair that follows either the mouse pointer or the hovered point.
    • getDateTimeLabelFormats

      public abstract DateTimeLabelFormats getDateTimeLabelFormats()
      See Also:
    • setDateTimeLabelFormats

      public abstract void setDateTimeLabelFormats(DateTimeLabelFormats dateTimeLabelFormats)
      For a datetime axis, the scale will automatically adjust to the appropriate unit. This member gives the default string representations used for each unit. For an overview of the replacement codes, see dateFormat.
    • getDescription

      public abstract String getDescription()
      See Also:
    • setDescription

      public abstract void setDescription(String description)
      Description of the axis to screen reader users.
    • getEndOnTick

      public abstract Boolean getEndOnTick()
      See Also:
    • setEndOnTick

      public abstract void setEndOnTick(Boolean endOnTick)
      Whether to force the axis to end on a tick. Use this option with the maxPadding option to control the axis end.
    • getFloor

      public abstract Number getFloor()
      See Also:
    • setFloor

      public abstract void setFloor(Number floor)
      The lowest allowed value for automatically computed axis extremes.
    • getGridZIndex

      public abstract Number getGridZIndex()
      See Also:
    • setGridZIndex

      public abstract void setGridZIndex(Number gridZIndex)
      The Z index of the grid lines.
    • getId

      public abstract String getId()
      See Also:
    • setId

      public abstract void setId(String id)
      An id for the axis. This can be used after render time to get a pointer to the axis object through chart.get().
    • getLabels

      public abstract Labels getLabels()
      See Also:
    • setLabels

      public abstract void setLabels(Labels labels)
      The axis labels show the number or category for each tick.
    • getLineColor

      public abstract Color getLineColor()
      See Also:
    • setLineColor

      public abstract void setLineColor(Color lineColor)
      The color of the line marking the axis itself.
    • getLineWidth

      public abstract Number getLineWidth()
      See Also:
    • setLineWidth

      public abstract void setLineWidth(Number lineWidth)
      The width of the line marking the axis itself.
    • getLinkedTo

      public abstract Number getLinkedTo()
      See Also:
    • setLinkedTo

      public abstract void setLinkedTo(Number linkedTo)
      Index of another axis that this axis is linked to. When an axis is linked to a master axis, it will take the same extremes as the master, but as assigned by min or max or by setExtremes. It can be used to show additional info, or to ease reading the chart by duplicating the scales.
    • getMaxPadding

      public abstract Number getMaxPadding()
      See Also:
    • setMaxPadding

      public abstract void setMaxPadding(Number maxPadding)
      Padding of the max value relative to the length of the axis. A padding of 0.05 will make a 100px axis 5px longer. This is useful when you don't want the highest data value to appear on the edge of the plot area. When the axis' max option is set or a max extreme is set using axis.setExtremes(), the maxPadding will be ignored.
    • getMinPadding

      public abstract Number getMinPadding()
      See Also:
    • setMinPadding

      public abstract void setMinPadding(Number minPadding)
      Padding of the min value relative to the length of the axis. A padding of 0.05 will make a 100px axis 5px longer. This is useful when you don't want the lowest data value to appear on the edge of the plot area. When the axis' min option is set or a min extreme is set using axis.setExtremes(), the minPadding will be ignored.
    • getMinRange

      public abstract Number getMinRange()
      See Also:
    • setMinRange

      public abstract void setMinRange(Number minRange)

      The minimum range to display on this axis. The entire axis will not be allowed to span over a smaller interval than this. For example, for a datetime axis the main unit is milliseconds. If minRange is set to 3600000, you can't zoom in more than to one hour.

      The default minRange for the x axis is five times the smallest interval between any of the data points.

      On a logarithmic axis, the unit for the minimum range is the power. So a minRange of 1 means that the axis can be zoomed to 10-100, 100-1000, 1000-10000 etc.

      Note that the minPadding, maxPadding, startOnTick and endOnTick settings also affect how the extremes of the axis are computed.

    • getMinTickInterval

      public abstract Number getMinTickInterval()
      See Also:
    • setMinTickInterval

      public abstract void setMinTickInterval(Number minTickInterval)
      The minimum tick interval allowed in axis values. For example on zooming in on an axis with daily data, this can be used to prevent the axis from showing hours.
    • getMinorTickInterval

      public abstract String getMinorTickInterval()
      See Also:
    • setMinorTickInterval

      public abstract void setMinorTickInterval(String minorTickInterval)

      Tick interval in scale units for the minor ticks. On a linear axis, if "auto", the minor tick interval is calculated as a fifth of the tickInterval. If null, minor ticks are not shown.

      On logarithmic axes, the unit is the power of the value. For example, setting the minorTickInterval to 1 puts one tick on each of 0.1, 1, 10, 100 etc. Setting the minorTickInterval to 0.1 produces 9 ticks between 1 and 10, 10 and 100 etc. A minorTickInterval of "auto" on a log axis results in a best guess, attempting to enter approximately 5 minor ticks between each major tick.

      If user settings dictate minor ticks to become too dense, they don't make sense, and will be ignored to prevent performance problems.

      On axes using categories, minor ticks are not supported.

    • getMinorTickLength

      public abstract Number getMinorTickLength()
      See Also:
    • setMinorTickLength

      public abstract void setMinorTickLength(Number minorTickLength)
      The pixel length of the minor tick marks.
    • getMinorTickPosition

      public abstract TickPosition getMinorTickPosition()
      See Also:
    • setMinorTickPosition

      public abstract void setMinorTickPosition(TickPosition minorTickPosition)
      The position of the minor tick marks relative to the axis line. Can be one of inside and outside.
    • getOffset

      public abstract Number getOffset()
      See Also:
    • setOffset

      public abstract void setOffset(Number offset)
      The distance in pixels from the plot area to the axis line. A positive offset moves the axis with it's line, labels and ticks away from the plot area. This is typically used when two or more axes are displayed on the same side of the plot.
    • getOpposite

      public abstract Boolean getOpposite()
      See Also:
    • setOpposite

      public abstract void setOpposite(Boolean opposite)
      Whether to display the axis on the opposite side of the normal. The normal is on the left side for vertical axes and bottom for horizontal, so the opposite sides will be right and top respectively. This is typically used with dual or multiple axes.
    • getPlotBands

      public abstract PlotBand[] getPlotBands()
      See Also:
    • setPlotBands

      public abstract void setPlotBands(PlotBand... plotBands)

      An array of colored bands stretching across the plot area marking an interval on the axis.

    • addPlotBand

      public abstract void addPlotBand(PlotBand plotBand)
      Adds plotBand to the plotBands array
      Parameters:
      plotBand - to add
      See Also:
    • removePlotBand

      public abstract void removePlotBand(PlotBand plotBand)
      Removes first occurrence of plotBand in plotBands array
      Parameters:
      plotBand - to remove
      See Also:
    • getPlotLines

      public abstract PlotLine[] getPlotLines()
      See Also:
    • setPlotLines

      public abstract void setPlotLines(PlotLine... plotLines)
      An array of lines stretching across the plot area, marking a specific value on one of the axes.
    • addPlotLine

      public abstract void addPlotLine(PlotLine plotLine)
      Adds plotLine to the plotLines array
      Parameters:
      plotLine - to add
      See Also:
    • removePlotLine

      public abstract void removePlotLine(PlotLine plotLine)
      Removes first occurrence of plotLine in plotLines array
      Parameters:
      plotLine - to remove
      See Also:
    • getReversed

      public abstract Boolean getReversed()
      See Also:
    • setReversed

      public abstract void setReversed(Boolean reversed)
      Whether to reverse the axis so that the highest number is closest to the origin.
    • getShowEmpty

      public abstract Boolean getShowEmpty()
      See Also:
    • setShowEmpty

      public abstract void setShowEmpty(Boolean showEmpty)
      Whether to show the axis line and title when the axis has no data.
    • getShowFirstLabel

      public abstract Boolean getShowFirstLabel()
      See Also:
    • setShowFirstLabel

      public abstract void setShowFirstLabel(Boolean showFirstLabel)
      Whether to show the first tick label.
    • getShowLastLabel

      public abstract Boolean getShowLastLabel()
      See Also:
    • setShowLastLabel

      public abstract void setShowLastLabel(Boolean showLastLabel)
      Whether to show the last tick label.
    • getSoftMax

      public abstract Number getSoftMax()
      See Also:
    • setSoftMax

      public abstract void setSoftMax(Number softMax)
      A soft maximum for the axis. If the series data maximum is less than this, the axis will stay at this maximum, but if the series data maximum is higher, the axis will flex to show all data.
    • getSoftMin

      public abstract Number getSoftMin()
      See Also:
    • setSoftMin

      public abstract void setSoftMin(Number softMin)
      A soft minimum for the axis. If the series data minimum is greater than this, the axis will stay at this minimum, but if the series data minimum is lower, the axis will flex to show all data.
    • getStartOfWeek

      public abstract Number getStartOfWeek()
      See Also:
    • setStartOfWeek

      public abstract void setStartOfWeek(Number startOfWeek)
      For datetime axes, this decides where to put the tick between weeks. 0 = Sunday, 1 = Monday.
    • getStartOnTick

      public abstract Boolean getStartOnTick()
      See Also:
    • setStartOnTick

      public abstract void setStartOnTick(Boolean startOnTick)
      Whether to force the axis to start on a tick. Use this option with the minPadding option to control the axis start.
    • getTickAmount

      public abstract Number getTickAmount()
      See Also:
    • setTickAmount

      public abstract void setTickAmount(Number tickAmount)

      The amount of ticks to draw on the axis. This opens up for aligning the ticks of multiple charts or panes within a chart. This option overrides the tickPixelInterval option.

      This option only has an effect on linear axes. Datetime, logarithmic or category axes are not affected.

    • getTickColor

      public abstract Color getTickColor()
      See Also:
    • setTickColor

      public abstract void setTickColor(Color tickColor)
      Color for the main tick marks.
    • getTickInterval

      public abstract Number getTickInterval()
      See Also:
    • setTickInterval

      public abstract void setTickInterval(Number tickInterval)

      The interval of the tick marks in axis units. When null, the tick interval is computed to approximately follow the tickPixelInterval on linear and datetime axes. On categorized axes, a null tickInterval will default to 1, one category. Note that datetime axes are based on milliseconds, so for example an interval of one day is expressed as 24 * 3600 * 1000.

      On logarithmic axes, the tickInterval is based on powers, so a tickInterval of 1 means one tick on each of 0.1, 1, 10, 100 etc. A tickInterval of 2 means a tick of 0.1, 10, 1000 etc. A tickInterval of 0.2 puts a tick on 0.1, 0.2, 0.4, 0.6, 0.8, 1, 2, 4, 6, 8, 10, 20, 40 etc.

      If the tickInterval is too dense for labels to be drawn, Highcharts may remove ticks.

    • getTickLength

      public abstract Number getTickLength()
      See Also:
    • setTickLength

      public abstract void setTickLength(Number tickLength)
      The pixel length of the main tick marks.
    • getTickPixelInterval

      public abstract Number getTickPixelInterval()
      See Also:
    • setTickPixelInterval

      public abstract void setTickPixelInterval(Number tickPixelInterval)
      If tickInterval is null this option sets the approximate pixel interval of the tick marks. Not applicable to categorized axis.
    • getTickPosition

      public abstract TickPosition getTickPosition()
      See Also:
    • setTickPosition

      public abstract void setTickPosition(TickPosition tickPosition)
      The position of the major tick marks relative to the axis line. Can be one of inside and outside.
    • getTickPositions

      public abstract Number[] getTickPositions()
      See Also:
    • setTickPositions

      public abstract void setTickPositions(Number[] tickPositions)
      An array defining where the ticks are laid out on the axis. This overrides the default behaviour of tickPixelInterval and tickInterval.
    • getTickmarkPlacement

      public abstract TickmarkPlacement getTickmarkPlacement()
      See Also:
    • setTickmarkPlacement

      public abstract void setTickmarkPlacement(TickmarkPlacement tickmarkPlacement)
      For categorized axes only. If on the tick mark is placed in the center of the category, if between the tick mark is placed between categories. The default is between if the tickInterval is 1, else on.
    • getTitle

      public abstract AxisTitle getTitle()
      See Also:
    • setTitle

      public abstract void setTitle(AxisTitle title)
      The axis title, showing next to the axis line.
    • getType

      public abstract AxisType getType()
      See Also:
    • setType

      public abstract void setType(AxisType type)
      The type of axis. Can be one of "linear", "logarithmic", "datetime" or "category". In a datetime axis, the numbers are given in milliseconds, and tick marks are placed on appropriate values like full hours or days. In a category axis, the point names of the chart's series are used for categories, if not a categories array is defined.
    • getUniqueNames

      public abstract Boolean getUniqueNames()
      See Also:
    • setUniqueNames

      public abstract void setUniqueNames(Boolean uniqueNames)
      Applies only when the axis type is category. When uniqueNames is true, points are placed on the X axis according to their names. If the same point name is repeated in the same or another series, the point is placed on the same X position as other points of the same name. When uniqueNames is false, the points are laid out in increasing X positions regardless of their names, and the X axis category will take the name of the last point in each position.
    • getUnits

      public abstract TimeUnitMultiples[] getUnits()
      See Also:
    • setUnits

      public abstract void setUnits(TimeUnitMultiples... units)
      Datetime axis only. An array determining what time intervals the ticks are allowed to fall on. Each array item is an array where the first value is the time unit and the second value another array of allowed multiples.
    • addUnit

      public abstract void addUnit(TimeUnitMultiples unit)
      Adds unit to the units array
      Parameters:
      unit - to add
      See Also:
    • removeUnit

      public abstract void removeUnit(TimeUnitMultiples unit)
      Removes first occurrence of unit in units array
      Parameters:
      unit - to remove
      See Also:
    • getVisible

      public abstract Boolean getVisible()
      See Also:
    • setVisible

      public abstract void setVisible(Boolean visible)
      Whether axis, including axis title, line, ticks and labels, should be visible.
    • setTitle

      public abstract void setTitle(String title)