RecordBuf

Records input into a Buffer. If recLevel is 1.0 and preLevel is 0.0 then the new input overwrites the old data. If they are both 1.0 then the new data is added to the existing data. (Any other settings are also valid.)

in: the signal to record
buf: the identifier of the buffer to use
offset: sample frame to begin writing from. This is read when a trigger occurs.
recLevel: value to multiply by input before mixing with existing data.
preLevel: value by which the previous buffer contents is multiplied when recording. If this value is zero, the buffer contents is completely overwritten. If this value is one, the new signal is added to the previous content.
run: if zero the recording pauses, otherwise it resumes. The value of run is only read at control-rate! When the recording is paused, the "write-head" remains in its current position and does not advance.
loop: 1 to loop after the write head reaches the buffer end, 0 to not loop. This can be modulated.
trig: a trigger which causes a jump to the given offset . A trigger occurs when a signal changes from non-positive to positive (e.g. <= 0 to > 0).
doneAction: what to do when the write head reaches the buffer end. This is only effective when loop is zero.

See also: BufFrames
BufRateScale
Done
DoneAction
PlayBuf
DiskOut
BufWr

Linear Supertypes

Serializable, Serializable, HasDoneFlag, IsIndividual, HasSideEffect, SingleOut, SomeOut, GE.Lazy, GE, UGenSource[UGenInLike], Expander[UGenInLike], Lazy, Product, Equals, AnyRef, Any

Instance Constructors

new RecordBuf(rate: Rate, in: GE, buf: GE, offset: GE = 0, recLevel: GE = 1.0f, preLevel: GE = 0.0f, run: GE = 1, loop: GE = 1, trig: GE = 1, doneAction: GE = doNothing)

in
the signal to record
buf
the identifier of the buffer to use
offset
sample frame to begin writing from. This is read when a trigger occurs.
recLevel
value to multiply by input before mixing with existing data.
preLevel
value by which the previous buffer contents is multiplied when recording. If this value is zero, the buffer contents is completely overwritten. If this value is one, the new signal is added to the previous content.
run
if zero the recording pauses, otherwise it resumes. The value of run is only read at control-rate! When the recording is paused, the "write-head" remains in its current position and does not advance.
loop
1 to loop after the write head reaches the buffer end, 0 to not loop. This can be modulated.
trig
a trigger which causes a jump to the given offset . A trigger occurs when a signal changes from non-positive to positive (e.g. <= 0 to > 0).
doneAction
what to do when the write head reaches the buffer end. This is only effective when loop is zero.

Value Members

final def !=(arg0: Any): Boolean

Definition Classes
AnyRef → Any
final def ##(): Int

Definition Classes
AnyRef → Any
final def ==(arg0: Any): Boolean

Definition Classes
AnyRef → Any
final def asInstanceOf[T0]: T0

Definition Classes
Any
val buf: GE

the identifier of the buffer to use
def clone(): AnyRef

Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
@throws( ... )
val doneAction: GE

what to do when the write head reaches the buffer end.
what to do when the write head reaches the buffer end. This is only effective when loop is zero.
final def eq(arg0: AnyRef): Boolean

Definition Classes
AnyRef
def finalize(): Unit

Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
@throws( classOf[java.lang.Throwable] )
final def getClass(): Class[_]

Definition Classes
AnyRef → Any
lazy val hashCode: Int

Definition Classes
UGenSource → AnyRef → Any
val in: GE

the signal to record
final def isInstanceOf[T0]: Boolean

Definition Classes
Any
val loop: GE

1 to loop after the write head reaches the buffer end, 0 to not loop.
1 to loop after the write head reaches the buffer end, 0 to not loop. This can be modulated.
def makeUGen(_args: Vec[UGenIn]): UGenInLike

Attributes
protected
Definition Classes
RecordBuf → UGenSource
def makeUGens: UGenInLike

Attributes
protected
Definition Classes
RecordBuf → Expander
final def name: String

Definition Classes
UGenSource
final def ne(arg0: AnyRef): Boolean

Definition Classes
AnyRef
final def notify(): Unit

Definition Classes
AnyRef
final def notifyAll(): Unit

Definition Classes
AnyRef
val offset: GE

sample frame to begin writing from.
sample frame to begin writing from. This is read when a trigger occurs.
val preLevel: GE

value by which the previous buffer contents is multiplied when recording.
value by which the previous buffer contents is multiplied when recording. If this value is zero, the buffer contents is completely overwritten. If this value is one, the new signal is added to the previous content.
val rate: Rate

Definition Classes
RecordBuf → GE
val recLevel: GE

value to multiply by input before mixing with existing data.
val run: GE

if zero the recording pauses, otherwise it resumes.
if zero the recording pauses, otherwise it resumes. The value of run is only read at control-rate! When the recording is paused, the "write-head" remains in its current position and does not advance.
final def synchronized[T0](arg0: ⇒ T0): T0

Definition Classes
AnyRef
val trig: GE

a trigger which causes a jump to the given offset .
a trigger which causes a jump to the given offset . A trigger occurs when a signal changes from non-positive to positive (e.g. <= 0 to > 0).
final def wait(): Unit

Definition Classes
AnyRef
Annotations
@throws( ... )
final def wait(arg0: Long, arg1: Int): Unit

Definition Classes
AnyRef
Annotations
@throws( ... )
final def wait(arg0: Long): Unit

Definition Classes
AnyRef
Annotations
@throws( ... )

Related Docs: object RecordBuf | package ugen

final case class RecordBuf(rate: Rate, in: GE, buf: GE, offset: GE = 0, recLevel: GE = 1.0f, preLevel: GE = 0.0f, run: GE = 1, loop: GE = 1, trig: GE = 1, doneAction: GE = doNothing) extends SingleOut with HasSideEffect with IsIndividual with HasDoneFlag with Product with Serializable

Instance Constructors

new RecordBuf(rate: Rate, in: GE, buf: GE, offset: GE = 0, recLevel: GE = 1.0f, preLevel: GE = 0.0f, run: GE = 1, loop: GE = 1, trig: GE = 1, doneAction: GE = doNothing)

Value Members

final def !=(arg0: Any): Boolean

final def ##(): Int

final def ==(arg0: Any): Boolean

final def asInstanceOf[T0]: T0

val buf: GE

def clone(): AnyRef

val doneAction: GE

final def eq(arg0: AnyRef): Boolean

def finalize(): Unit

final def getClass(): Class[_]

lazy val hashCode: Int

val in: GE

final def isInstanceOf[T0]: Boolean

val loop: GE

def makeUGen(_args: Vec[UGenIn]): UGenInLike

def makeUGens: UGenInLike

final def name: String

final def ne(arg0: AnyRef): Boolean

final def notify(): Unit

final def notifyAll(): Unit

val offset: GE

val preLevel: GE

val rate: Rate

val recLevel: GE

val run: GE

final def synchronized[T0](arg0: ⇒ T0): T0

val trig: GE

final def wait(): Unit

final def wait(arg0: Long, arg1: Int): Unit

final def wait(arg0: Long): Unit

Inherited from Serializable

Inherited from Serializable

Inherited from HasDoneFlag

Inherited from IsIndividual

Inherited from HasSideEffect

Inherited from SingleOut

Inherited from SomeOut

Inherited from GE.Lazy

Inherited from GE

Inherited from UGenSource[UGenInLike]

Inherited from Expander[UGenInLike]

Inherited from Lazy

Inherited from Product

Inherited from Equals

Inherited from AnyRef

Inherited from Any

Ungrouped