CamelContext (Camel :: API 3.2.0 API)

All Superinterfaces:

AutoCloseable, CamelContextLifecycle, RuntimeConfiguration

All Known Subinterfaces:

CatalogCamelContext, ExtendedCamelContext
```
public interface CamelContext
extends CamelContextLifecycle, RuntimeConfiguration
```
Interface used to represent the CamelContext used to configure routes and the policies to use during message exchanges between endpoints.
The CamelContext offers the following methods CamelContextLifecycle to control the lifecycle:
- CamelContextLifecycle.start() - to start (important: the start method is not blocked, see more details here)
- CamelContextLifecycle.stop() - to shutdown (will stop all routes/components/endpoints etc and clear internal state/cache)
- CamelContextLifecycle.suspend() - to pause routing messages
- CamelContextLifecycle.resume() - to resume after a suspend
Notice: CamelContextLifecycle.stop() and CamelContextLifecycle.suspend() will gracefully stop/suspend routes ensuring any messages in progress will be given time to complete. See more details at ShutdownStrategy.
If you are doing a hot restart then it's advised to use the suspend/resume methods which ensure a faster restart but also allows any internal state to be kept as is. The stop/start approach will do a cold restart of Camel, where all internal state is reset.
End users are advised to use suspend/resume. Using stop is for shutting down Camel and it's not guaranteed that when it's being started again using the start method that Camel will operate consistently.
For more advanced APIs with CamelContext see ExtendedCamelContext, which you can obtain via the adapt method.

Method Summary

All Methods Instance Methods Abstract Methods Deprecated Methods
Modifier and Type	Method and Description
`<T extends CamelContext> T`	`adapt(Class<T> type)` Adapts this `CamelContext` to the specialized type.
`void`	`addComponent(String componentName, Component component)` Adds a component to the context.
`Endpoint`	`addEndpoint(String uri, Endpoint endpoint)` Adds and starts the endpoint to the `EndpointRegistry` using the given URI.
`void`	`addLifecycleStrategy(LifecycleStrategy lifecycleStrategy)` Adds the given lifecycle strategy to be used.
`void`	`addPrototypeService(Object object)` Adds a service to this CamelContext (prototype scope).
`void`	`addRoutePolicyFactory(RoutePolicyFactory routePolicyFactory)` Adds the given route policy factory
`void`	`addRoutes(RoutesBuilder builder)` Adds a collection of routes to this CamelContext using the given builder to build them.
`void`	`addService(Object object)` Adds a service to this CamelContext, which allows this CamelContext to control the lifecycle, ensuring the service is stopped when the CamelContext stops.
`void`	`addService(Object object, boolean stopOnShutdown)` Adds a service to this CamelContext.
`void`	`addService(Object object, boolean stopOnShutdown, boolean forceStart)` Adds a service to this CamelContext.
`void`	`addStartupListener(StartupListener listener)` Adds the given listener to be invoked when `CamelContext` have just been started.
`ConsumerTemplate`	`createConsumerTemplate()` Creates a new `ConsumerTemplate` which is started and therefore ready to use right away.
`ConsumerTemplate`	`createConsumerTemplate(int maximumCacheSize)` Creates a new `ConsumerTemplate` which is started and therefore ready to use right away.
`DataFormat`	`createDataFormat(String name)` Creates the given data format given its name.
`FluentProducerTemplate`	`createFluentProducerTemplate()` Creates a new `FluentProducerTemplate` which is started and therefore ready to use right away.
`FluentProducerTemplate`	`createFluentProducerTemplate(int maximumCacheSize)` Creates a new `FluentProducerTemplate` which is started and therefore ready to use right away.
`ProducerTemplate`	`createProducerTemplate()` Creates a new `ProducerTemplate` which is started and therefore ready to use right away.
`ProducerTemplate`	`createProducerTemplate(int maximumCacheSize)` Creates a new `ProducerTemplate` which is started and therefore ready to use right away.
`void`	`deferStartService(Object object, boolean stopOnShutdown)` Defers starting the service until `CamelContext` is (almost started) or started and has initialized all its prior services and routes.
`void`	`disableJMX()` Disables using JMX as `ManagementStrategy`.
`ClassLoader`	`getApplicationContextClassLoader()` Gets the application CamelContext class loader which may be helpful for running camel in other containers
`ClassResolver`	`getClassResolver()` Returns the class resolver to be used for loading/lookup of classes.
`Component`	`getComponent(String componentName)` Gets a component from the CamelContext by name.
`Component`	`getComponent(String name, boolean autoCreateComponents)` Gets a component from the CamelContext by name.
`Component`	`getComponent(String name, boolean autoCreateComponents, boolean autoStart)` Gets a component from the CamelContext by name.
`<T extends Component> T`	`getComponent(String name, Class<T> componentType)` Gets a component from the CamelContext by name and specifying the expected type of component.
`List<String>`	`getComponentNames()` Gets a readonly list of names of the components currently registered
`Debugger`	`getDebugger()` Gets the current `Debugger`
`Endpoint`	`getEndpoint(String uri)` Resolves the given name to an `Endpoint` of the specified type.
`<T extends Endpoint> T`	`getEndpoint(String name, Class<T> endpointType)` Resolves the given name to an `Endpoint` of the specified type.
`Endpoint`	`getEndpoint(String uri, Map<String,Object> parameters)` Resolves the given name to an `Endpoint` of the specified type.
`Map<String,Endpoint>`	`getEndpointMap()` Deprecated. use `getEndpointRegistry()`
`EndpointRegistry<? extends ValueHolder<String>>`	`getEndpointRegistry()` Gets the `EndpointRegistry`
`Collection<Endpoint>`	`getEndpoints()` Returns a new `Collection` of all of the endpoints from the `EndpointRegistry`
`ExecutorServiceManager`	`getExecutorServiceManager()` Gets the current `ExecutorServiceManager`
`<T> T`	`getExtension(Class<T> type)` Gets the extension of the given type.
`GlobalEndpointConfiguration`	`getGlobalEndpointConfiguration()` Gets the global endpoint configuration, where you can configure common endpoint options.
`String`	`getGlobalOption(String key)` Gets the global option value that can be referenced in the camel context Important: This has nothing to do with property placeholders, and is just a plain set of key/value pairs which are used to configure global options on CamelContext, such as a maximum debug logging length etc.
`Map<String,String>`	`getGlobalOptions()` Gets global options that can be referenced in the camel context.
`InflightRepository`	`getInflightRepository()` Gets the inflight repository
`Injector`	`getInjector()` Returns the injector used to instantiate objects by type
`List<String>`	`getLanguageNames()` Deprecated. not in use
`List<LifecycleStrategy>`	`getLifecycleStrategies()` Returns the lifecycle strategies used to handle lifecycle notifications
`String`	`getManagementName()` Gets the name this `CamelContext` was registered in JMX.
`ManagementNameStrategy`	`getManagementNameStrategy()` Gets the current management name strategy
`ManagementStrategy`	`getManagementStrategy()` Gets the management strategy
`String`	`getMDCLoggingKeysPattern()` Gets the pattern used for determine which custom MDC keys to propagate during message routing when the routing engine continues routing asynchronously for the given message.
`MessageHistoryFactory`	`getMessageHistoryFactory()` Gets the current `MessageHistoryFactory`
`String`	`getName()` Gets the name (id) of the this CamelContext.
`CamelContextNameStrategy`	`getNameStrategy()` Gets the current name strategy
`Processor`	`getProcessor(String id)` Gets the processor from any of the routes which with the given id
`<T extends Processor> T`	`getProcessor(String id, Class<T> type)` Gets the processor from any of the routes which with the given id
`PropertiesComponent`	`getPropertiesComponent()` Returns the configured properties component or create one if none has been configured.
`Registry`	`getRegistry()` Returns the registry used to lookup components by name and type such as SimpleRegistry, Spring ApplicationContext, JNDI, or the OSGi Service Registry.
`<T> T`	`getRegistry(Class<T> type)` Returns the registry used to lookup components by name and as the given type
`RestConfiguration`	`getRestConfiguration()` Gets the default REST configuration
`RestRegistry`	`getRestRegistry()` Gets the `RestRegistry` to use
`Route`	`getRoute(String id)` Gets the route with the given id
`RouteController`	`getRouteController()` Gets the `RouteController`
`List<RoutePolicyFactory>`	`getRoutePolicyFactories()` Gets the route policy factories
`List<Route>`	`getRoutes()` Returns the current routes in this CamelContext
`int`	`getRoutesSize()` Returns the total number of routes in this CamelContext
`RuntimeEndpointRegistry`	`getRuntimeEndpointRegistry()` Gets the `RuntimeEndpointRegistry` to use, or `null` if none is in use.
`ShutdownStrategy`	`getShutdownStrategy()` Gets the current shutdown strategy
`SSLContextParameters`	`getSSLContextParameters()` Gets the global SSL context parameters if configured.
`Date`	`getStartDate()` Gets the date and time Camel was started up.
`StreamCachingStrategy`	`getStreamCachingStrategy()` Gets the `StreamCachingStrategy` to use.
`Tracer`	`getTracer()` Gets the current `Tracer`
`TransformerRegistry`	`getTransformerRegistry()` Gets the `TransformerRegistry`
`TypeConverter`	`getTypeConverter()` Returns the type converter used to coerce types from one type to another.
`TypeConverterRegistry`	`getTypeConverterRegistry()` Returns the type converter registry where type converters can be added or looked up
`String`	`getUptime()` Gets the uptime in a human readable format
`long`	`getUptimeMillis()` Gets the uptime in milli seconds
`UuidGenerator`	`getUuidGenerator()` Gets the current `UuidGenerator`
`ValidatorRegistry`	`getValidatorRegistry()` Gets the `ValidatorRegistry`
`String`	`getVersion()` Gets the version of the this CamelContext.
`Component`	`hasComponent(String componentName)` Is the given component already registered?
`Endpoint`	`hasEndpoint(String uri)` Is the given endpoint already registered in the `EndpointRegistry`
`<T> T`	`hasService(Class<T> type)` Has the given service type already been added to this CamelContext?
`boolean`	`hasService(Object object)` Has the given service already been added to this CamelContext?
`<T> Set<T>`	`hasServices(Class<T> type)` Has the given service type already been added to this CamelContext?
`Boolean`	`isLoadTypeConverters()` Whether to load custom type converters by scanning classpath.
`Boolean`	`isTypeConverterStatisticsEnabled()` Whether or not type converter statistics is enabled.
`Boolean`	`isUseBreadcrumb()` Whether or not breadcrumb is enabled.
`Boolean`	`isUseDataType()` Whether to enable using data type on Camel messages.
`Boolean`	`isUseMDCLogging()` Whether or not MDC logging is being enabled.
`boolean`	`isVetoStarted()` If CamelContext during the start procedure was vetoed, and therefore causing Camel to not start.
`Component`	`removeComponent(String componentName)` Removes a previously added component.
`void`	`removeEndpoint(Endpoint endpoint)` Removes the endpoint from the `EndpointRegistry`.
`Collection<Endpoint>`	`removeEndpoints(String pattern)` Removes all endpoints with the given URI from the `EndpointRegistry`.
`boolean`	`removeRoute(String routeId)` Removes the given route (the route must be stopped before it can be removed).
`boolean`	`removeService(Object object)` Removes a service from this CamelContext.
`DataFormat`	`resolveDataFormat(String name)` Resolve a data format given its name
`Language`	`resolveLanguage(String language)` Resolves a language for creating expressions
`String`	`resolvePropertyPlaceholders(String text)` Parses the given text and resolve any property placeholders - using {{key}}.
`Transformer`	`resolveTransformer(DataType from, DataType to)` Resolve a transformer given from/to data type.
`Transformer`	`resolveTransformer(String model)` Resolve a transformer given a scheme
`Validator`	`resolveValidator(DataType type)` Resolve a validator given from/to data type.
`void`	`setApplicationContextClassLoader(ClassLoader classLoader)` Sets the application CamelContext class loader
`void`	`setClassResolver(ClassResolver resolver)` Sets the class resolver to be use
`void`	`setDebugger(Debugger debugger)` Sets a custom `Debugger`
`void`	`setExecutorServiceManager(ExecutorServiceManager executorServiceManager)` Sets a custom `ExecutorServiceManager`
`<T> void`	`setExtension(Class<T> type, T module)` Allows to install custom extensions to the Camel context.
`void`	`setGlobalOptions(Map<String,String> globalOptions)` Sets global options that can be referenced in the camel context Important: This has nothing to do with property placeholders, and is just a plain set of key/value pairs which are used to configure global options on CamelContext, such as a maximum debug logging length etc.
`void`	`setInflightRepository(InflightRepository repository)` Sets a custom inflight repository to use
`void`	`setInjector(Injector injector)` Sets the injector to use
`void`	`setLoadTypeConverters(Boolean loadTypeConverters)` Whether to load custom type converters by scanning classpath.
`void`	`setManagementName(String name)` Sets the name this `CamelContext` will be registered in JMX.
`void`	`setManagementNameStrategy(ManagementNameStrategy nameStrategy)` Sets a custom management name strategy
`void`	`setManagementStrategy(ManagementStrategy strategy)` Sets the management strategy to use
`void`	`setMDCLoggingKeysPattern(String pattern)` Sets the pattern used for determine which custom MDC keys to propagate during message routing when the routing engine continues routing asynchronously for the given message.
`void`	`setMessageHistoryFactory(MessageHistoryFactory messageHistoryFactory)` Sets a custom `MessageHistoryFactory`
`void`	`setNameStrategy(CamelContextNameStrategy nameStrategy)` Sets a custom name strategy
`void`	`setPropertiesComponent(PropertiesComponent propertiesComponent)` Sets a custom properties component to be used.
`void`	`setRestConfiguration(RestConfiguration restConfiguration)` Sets a custom `RestConfiguration`
`void`	`setRestRegistry(RestRegistry restRegistry)` Sets a custom `RestRegistry` to use.
`void`	`setRouteController(RouteController routeController)` Sets a custom `RouteController` to use
`void`	`setRuntimeEndpointRegistry(RuntimeEndpointRegistry runtimeEndpointRegistry)` Sets a custom `RuntimeEndpointRegistry` to use.
`void`	`setShutdownStrategy(ShutdownStrategy shutdownStrategy)` Sets a custom shutdown strategy
`void`	`setSSLContextParameters(SSLContextParameters sslContextParameters)` Sets the global SSL context parameters.
`void`	`setStreamCachingStrategy(StreamCachingStrategy streamCachingStrategy)` Sets a custom `StreamCachingStrategy` to use.
`void`	`setTracer(Tracer tracer)` Sets a custom `Tracer`
`void`	`setTypeConverterRegistry(TypeConverterRegistry typeConverterRegistry)` Configures the type converter registry to use, where type converters can be added or looked up.
`void`	`setTypeConverterStatisticsEnabled(Boolean typeConverterStatisticsEnabled)` Sets whether or not type converter statistics is enabled.
`void`	`setUseBreadcrumb(Boolean useBreadcrumb)` Set whether breadcrumb is enabled.
`void`	`setUseDataType(Boolean useDataType)` Whether to enable using data type on Camel messages.
`void`	`setUseMDCLogging(Boolean useMDCLogging)` Set whether MDC is enabled.
`void`	`setUuidGenerator(UuidGenerator uuidGenerator)` Sets a custom `UuidGenerator` (should only be set once)

Methods inherited from interface org.apache.camel.CamelContextLifecycle
build, close, getStatus, init, isRunAllowed, isStarted, isStarting, isStopped, isStopping, isSuspended, isSuspending, resume, shutdown, start, stop, suspend

- Method Detail
  - adapt
```
<T extends CamelContext> T adapt(Class<T> type)
```
    Adapts this CamelContext to the specialized type.
    For example to adapt to ExtendedCamelContext, ModelCamelContext, or SpringCamelContext, or CdiCamelContext, etc.
    
    Parameters:
    
    type - the type to adapt to
    
    Returns:
    
    this CamelContext adapted to the given type
  - getExtension
```
<T> T getExtension(Class<T> type)
```
    Gets the extension of the given type.
    
    Parameters:
    
    type - the type of the extension
    
    Returns:
    
    the extension, or null if no extension has been installed.
  - setExtension
```
<T> void setExtension(Class<T> type,
                      T module)
```
    Allows to install custom extensions to the Camel context.
    
    Parameters:
    
    type - the type of the extension
    
    module - the instance of the extension
  - isVetoStarted
```
boolean isVetoStarted()
```
    If CamelContext during the start procedure was vetoed, and therefore causing Camel to not start.
  - getName
```
String getName()
```
    Gets the name (id) of the this CamelContext.
    
    Returns:
    
    the name
  - getNameStrategy
```
CamelContextNameStrategy getNameStrategy()
```
    Gets the current name strategy
    
    Returns:
    
    name strategy
  - setNameStrategy
```
void setNameStrategy(CamelContextNameStrategy nameStrategy)
```
    Sets a custom name strategy
    
    Parameters:
    
    nameStrategy - name strategy
  - getManagementNameStrategy
```
ManagementNameStrategy getManagementNameStrategy()
```
    Gets the current management name strategy
    
    Returns:
    
    management name strategy
  - setManagementNameStrategy
```
void setManagementNameStrategy(ManagementNameStrategy nameStrategy)
```
    Sets a custom management name strategy
    
    Parameters:
    
    nameStrategy - name strategy
  - getManagementName
```
String getManagementName()
```
    Gets the name this CamelContext was registered in JMX.
    The reason that a CamelContext can have a different name in JMX is the fact to remedy for name clash in JMX when having multiple CamelContexts in the same JVM. Camel will automatic reassign and use a free name to avoid failing to start.
    
    Returns:
    
    the management name
  - setManagementName
```
void setManagementName(String name)
```
    Sets the name this CamelContext will be registered in JMX.
  - getVersion
```
String getVersion()
```
    Gets the version of the this CamelContext.
    
    Returns:
    
    the version
  - getUptime
```
String getUptime()
```
    Gets the uptime in a human readable format
    
    Returns:
    
    the uptime in days/hours/minutes
  - getUptimeMillis
```
long getUptimeMillis()
```
    Gets the uptime in milli seconds
    
    Returns:
    
    the uptime in millis seconds
  - getStartDate
```
Date getStartDate()
```
    Gets the date and time Camel was started up.
  - addService
```
void addService(Object object)
         throws Exception
```
    Adds a service to this CamelContext, which allows this CamelContext to control the lifecycle, ensuring the service is stopped when the CamelContext stops.
    The service will also have CamelContext injected if its CamelContextAware. The service will also be enlisted in JMX for management (if JMX is enabled). The service will be started, if its not already started.
    
    Parameters:
    
    object - the service
    
    Throws:
    
    Exception - can be thrown when starting the service
  - addService
```
void addService(Object object,
                boolean stopOnShutdown)
         throws Exception
```
    Adds a service to this CamelContext.
    The service will also have CamelContext injected if its CamelContextAware. The service will also be enlisted in JMX for management (if JMX is enabled). The service will be started, if its not already started.
    If the option closeOnShutdown is true then this CamelContext will control the lifecycle, ensuring the service is stopped when the CamelContext stops. If the option closeOnShutdown is false then this CamelContext will not stop the service when the CamelContext stops.
    
    Parameters:
    
    object - the service
    
    stopOnShutdown - whether to stop the service when this CamelContext shutdown.
    
    Throws:
    
    Exception - can be thrown when starting the service
  - addService
```
void addService(Object object,
                boolean stopOnShutdown,
                boolean forceStart)
         throws Exception
```
    Adds a service to this CamelContext.
    The service will also have CamelContext injected if its CamelContextAware. The service will also be enlisted in JMX for management (if JMX is enabled). The service will be started, if its not already started.
    If the option closeOnShutdown is true then this CamelContext will control the lifecycle, ensuring the service is stopped when the CamelContext stops. If the option closeOnShutdown is false then this CamelContext will not stop the service when the CamelContext stops.
    
    Parameters:
    
    object - the service
    
    stopOnShutdown - whether to stop the service when this CamelContext shutdown.
    
    forceStart - whether to force starting the service right now, as otherwise the service may be deferred being started to later using deferStartService(Object, boolean)
    
    Throws:
    
    Exception - can be thrown when starting the service
  - addPrototypeService
```
void addPrototypeService(Object object)
                  throws Exception
```
    Adds a service to this CamelContext (prototype scope).
    The service will also have CamelContext injected if its CamelContextAware. The service will be started, if its not already started.
    
    Parameters:
    
    object - the service
    
    Throws:
    
    Exception - can be thrown when starting the service
  - removeService
```
boolean removeService(Object object)
               throws Exception
```
    Removes a service from this CamelContext.
    The service is assumed to have been previously added using addService(Object) method. This method will not change the service lifecycle.
    
    Parameters:
    
    object - the service
    
    Returns:
    
    true if the service was removed, false if no service existed
    
    Throws:
    
    Exception - can be thrown if error removing the service
  - hasService
```
boolean hasService(Object object)
```
    Has the given service already been added to this CamelContext?
    
    Parameters:
    
    object - the service
    
    Returns:
    
    true if already added, false if not.
  - hasService
```
<T> T hasService(Class<T> type)
```
    Has the given service type already been added to this CamelContext?
    
    Parameters:
    
    type - the class type
    
    Returns:
    
    the service instance or null if not already added.
  - hasServices
```
<T> Set<T> hasServices(Class<T> type)
```
    Has the given service type already been added to this CamelContext?
    
    Parameters:
    
    type - the class type
    
    Returns:
    
    the services instance or empty set.
  - deferStartService
```
void deferStartService(Object object,
                       boolean stopOnShutdown)
                throws Exception
```
    Defers starting the service until CamelContext is (almost started) or started and has initialized all its prior services and routes.
    If CamelContext is already started then the service is started immediately.
    
    Parameters:
    
    object - the service
    
    stopOnShutdown - whether to stop the service when this CamelContext shutdown. Setting this to true will keep a reference to the service in this CamelContext until the CamelContext is stopped. So do not use it for short lived services.
    
    Throws:
    
    Exception - can be thrown when starting the service, which is only attempted if CamelContext has already been started when calling this method.
  - addStartupListener
```
void addStartupListener(StartupListener listener)
                 throws Exception
```
    Adds the given listener to be invoked when CamelContext have just been started.
    This allows listeners to do any custom work after the routes and other services have been started and are running.
    Important: The listener will always be invoked, also if the CamelContext has already been started, see the StartupListener.onCamelContextStarted(CamelContext, boolean) method.
    
    Parameters:
    
    listener - the listener
    
    Throws:
    
    Exception - can be thrown if CamelContext is already started and the listener is invoked and cause an exception to be thrown
  - addComponent
```
void addComponent(String componentName,
                  Component component)
```
    Adds a component to the context.
    
    Parameters:
    
    componentName - the name the component is registered as
    
    component - the component
  - hasComponent
```
Component hasComponent(String componentName)
```
    Is the given component already registered?
    
    Parameters:
    
    componentName - the name of the component
    
    Returns:
    
    the registered Component or null if not registered
  - getComponent
```
Component getComponent(String componentName)
```
    Gets a component from the CamelContext by name.
    Notice the returned component will be auto-started. If you do not intend to do that then use getComponent(String, boolean, boolean).
    
    Parameters:
    
    componentName - the name of the component
    
    Returns:
    
    the component
  - getComponent
```
Component getComponent(String name,
                       boolean autoCreateComponents)
```
    Gets a component from the CamelContext by name.
    Notice the returned component will be auto-started. If you do not intend to do that then use getComponent(String, boolean, boolean).
    
    Parameters:
    
    name - the name of the component
    
    autoCreateComponents - whether or not the component should be lazily created if it does not already exist
    
    Returns:
    
    the component
  - getComponent
```
Component getComponent(String name,
                       boolean autoCreateComponents,
                       boolean autoStart)
```
    Gets a component from the CamelContext by name.
    
    Parameters:
    
    name - the name of the component
    
    autoCreateComponents - whether or not the component should be lazily created if it does not already exist
    
    autoStart - whether to auto start the component if CamelContext is already started.
    
    Returns:
    
    the component
  - getComponent
```
<T extends Component> T getComponent(String name,
                                     Class<T> componentType)
```
    Gets a component from the CamelContext by name and specifying the expected type of component.
    
    Parameters:
    
    name - the name to lookup
    
    componentType - the expected type
    
    Returns:
    
    the component
  - getComponentNames
```
List<String> getComponentNames()
```
    Gets a readonly list of names of the components currently registered
    
    Returns:
    
    a readonly list with the names of the components
  - removeComponent
```
Component removeComponent(String componentName)
```
    Removes a previously added component.
    The component being removed will be stopped first.
    
    Parameters:
    
    componentName - the component name to remove
    
    Returns:
    
    the previously added component or null if it had not been previously added.
  - getEndpointRegistry
```
EndpointRegistry<? extends ValueHolder<String>> getEndpointRegistry()
```
    Gets the EndpointRegistry
  - getEndpoint
```
Endpoint getEndpoint(String uri)
```
    Resolves the given name to an Endpoint of the specified type. If the name has a singleton endpoint registered, then the singleton is returned. Otherwise, a new Endpoint is created and registered in the EndpointRegistry.
    
    Parameters:
    
    uri - the URI of the endpoint
    
    Returns:
    
    the endpoint
  - getEndpoint
```
Endpoint getEndpoint(String uri,
                     Map<String,Object> parameters)
```
    Resolves the given name to an Endpoint of the specified type. If the name has a singleton endpoint registered, then the singleton is returned. Otherwise, a new Endpoint is created and registered in the EndpointRegistry.
    
    Parameters:
    
    uri - the URI of the endpoint
    
    parameters - the parameters to customize the endpoint
    
    Returns:
    
    the endpoint
  - getEndpoint
```
<T extends Endpoint> T getEndpoint(String name,
                                   Class<T> endpointType)
```
    Resolves the given name to an Endpoint of the specified type. If the name has a singleton endpoint registered, then the singleton is returned. Otherwise, a new Endpoint is created and registered in the EndpointRegistry.
    
    Parameters:
    
    name - the name of the endpoint
    
    endpointType - the expected type
    
    Returns:
    
    the endpoint
  - getEndpoints
```
Collection<Endpoint> getEndpoints()
```
    Returns a new Collection of all of the endpoints from the EndpointRegistry
    
    Returns:
    
    all endpoints
  - getEndpointMap
```
@Deprecated
Map<String,Endpoint> getEndpointMap()
```
    Deprecated. use getEndpointRegistry()
    
    Returns a new Map containing all of the endpoints from the EndpointRegistry
    
    Returns:
    
    map of endpoints
  - hasEndpoint
```
Endpoint hasEndpoint(String uri)
```
    Is the given endpoint already registered in the EndpointRegistry
    
    Parameters:
    
    uri - the URI of the endpoint
    
    Returns:
    
    the registered endpoint or null if not registered
  - addEndpoint
```
Endpoint addEndpoint(String uri,
                     Endpoint endpoint)
              throws Exception
```
    Adds and starts the endpoint to the EndpointRegistry using the given URI.
    
    Parameters:
    
    uri - the URI to be used to resolve this endpoint
    
    endpoint - the endpoint to be started and added to the registry
    
    Returns:
    
    the old endpoint that was previously registered or null if none was registered
    
    Throws:
    
    Exception - if the new endpoint could not be started or the old endpoint could not be stopped
  - removeEndpoint
```
void removeEndpoint(Endpoint endpoint)
             throws Exception
```
    Removes the endpoint from the EndpointRegistry.
    The endpoint being removed will be stopped first.
    
    Parameters:
    
    endpoint - the endpoint
    
    Throws:
    
    Exception - if the endpoint could not be stopped
  - removeEndpoints
```
Collection<Endpoint> removeEndpoints(String pattern)
                              throws Exception
```
    Removes all endpoints with the given URI from the EndpointRegistry.
    The endpoints being removed will be stopped first.
    
    Parameters:
    
    pattern - an uri or pattern to match
    
    Returns:
    
    a collection of endpoints removed which could be empty if there are no endpoints found for the given pattern
    
    Throws:
    
    Exception - if at least one endpoint could not be stopped
    
    See Also:
    
    for pattern
  - getGlobalEndpointConfiguration
```
GlobalEndpointConfiguration getGlobalEndpointConfiguration()
```
    Gets the global endpoint configuration, where you can configure common endpoint options.
  - setRouteController
```
void setRouteController(RouteController routeController)
```
    Sets a custom RouteController to use
    
    Parameters:
    
    routeController - the route controller
  - getRouteController
```
RouteController getRouteController()
```
    Gets the RouteController
    
    Returns:
    
    the route controller.
  - getRoutes
```
List<Route> getRoutes()
```
    Returns the current routes in this CamelContext
    
    Returns:
    
    the current routes
  - getRoutesSize
```
int getRoutesSize()
```
    Returns the total number of routes in this CamelContext
  - getRoute
```
Route getRoute(String id)
```
    Gets the route with the given id
    
    Parameters:
    
    id - id of the route
    
    Returns:
    
    the route or null if not found
  - getProcessor
```
Processor getProcessor(String id)
```
    Gets the processor from any of the routes which with the given id
    
    Parameters:
    
    id - id of the processor
    
    Returns:
    
    the processor or null if not found
  - getProcessor
```
<T extends Processor> T getProcessor(String id,
                                     Class<T> type)
```
    Gets the processor from any of the routes which with the given id
    
    Parameters:
    
    id - id of the processor
    
    type - the processor type
    
    Returns:
    
    the processor or null if not found
    
    Throws:
    
    ClassCastException - is thrown if the type is not correct type
  - addRoutes
```
void addRoutes(RoutesBuilder builder)
        throws Exception
```
    Adds a collection of routes to this CamelContext using the given builder to build them.
    Important: The added routes will only be started, if CamelContext is already started. You may want to check the state of CamelContext before adding the routes, using the CamelContextLifecycle.getStatus() method.
    Important: Each route in the same CamelContext must have an unique route id. If you use the API from CamelContext or org.apache.camel.model.ModelCamelContext to add routes, then any new routes which has a route id that matches an old route, then the old route is replaced by the new route.
    
    Parameters:
    
    builder - the builder which will create the routes and add them to this CamelContext
    
    Throws:
    
    Exception - if the routes could not be created for whatever reason
  - removeRoute
```
boolean removeRoute(String routeId)
             throws Exception
```
    Removes the given route (the route must be stopped before it can be removed).
    A route which is removed will be unregistered from JMX, have its services stopped/shutdown and the route definition etc. will also be removed. All the resources related to the route will be stopped and cleared.
    Important: When removing a route, the Endpoints which are in the static cache of EndpointRegistry and are only used by the route (not used by other routes) will also be removed. But Endpoints which may have been created as part of routing messages by the route, and those endpoints are enlisted in the dynamic cache of EndpointRegistry are not removed. To remove those dynamic kind of endpoints, use the removeEndpoints(String) method. If not removing those endpoints, they will be kept in the dynamic cache of EndpointRegistry, but my eventually be removed (evicted) when they have not been in use for a longer period of time; and the dynamic cache upper limit is hit, and it evicts the least used endpoints.
    End users can use this method to remove unwanted routes or temporary routes which no longer is in demand.
    
    Parameters:
    
    routeId - the route id
    
    Returns:
    
    true if the route was removed, false if the route could not be removed because its not stopped
    
    Throws:
    
    Exception - is thrown if the route could not be shutdown for whatever reason
  - addRoutePolicyFactory
```
void addRoutePolicyFactory(RoutePolicyFactory routePolicyFactory)
```
    Adds the given route policy factory
    
    Parameters:
    
    routePolicyFactory - the factory
  - getRoutePolicyFactories
```
List<RoutePolicyFactory> getRoutePolicyFactories()
```
    Gets the route policy factories
    
    Returns:
    
    the list of current route policy factories
  - setRestConfiguration
```
void setRestConfiguration(RestConfiguration restConfiguration)
```
    Sets a custom RestConfiguration
    
    Parameters:
    
    restConfiguration - the REST configuration
  - getRestConfiguration
```
RestConfiguration getRestConfiguration()
```
    Gets the default REST configuration
    
    Returns:
    
    the configuration, or null if none has been configured.
  - getRestRegistry
```
RestRegistry getRestRegistry()
```
    Gets the RestRegistry to use
  - setRestRegistry
```
void setRestRegistry(RestRegistry restRegistry)
```
    Sets a custom RestRegistry to use.
  - getTypeConverter
```
TypeConverter getTypeConverter()
```
    Returns the type converter used to coerce types from one type to another.
    Notice that this CamelContext should be at least initialized before you can get the type converter.
    
    Returns:
    
    the converter
  - getTypeConverterRegistry
```
TypeConverterRegistry getTypeConverterRegistry()
```
    Returns the type converter registry where type converters can be added or looked up
    
    Returns:
    
    the type converter registry
  - setTypeConverterRegistry
```
void setTypeConverterRegistry(TypeConverterRegistry typeConverterRegistry)
```
    Configures the type converter registry to use, where type converters can be added or looked up.
    
    Parameters:
    
    typeConverterRegistry - the registry to use
  - getRegistry
```
Registry getRegistry()
```
    Returns the registry used to lookup components by name and type such as SimpleRegistry, Spring ApplicationContext, JNDI, or the OSGi Service Registry.
    
    Returns:
    
    the registry
  - getRegistry
```
<T> T getRegistry(Class<T> type)
```
    Returns the registry used to lookup components by name and as the given type
    
    Parameters:
    
    type - the registry type such as org.apache.camel.impl.JndiRegistry
    
    Returns:
    
    the registry, or null if the given type was not found as a registry implementation
  - getInjector
```
Injector getInjector()
```
    Returns the injector used to instantiate objects by type
    
    Returns:
    
    the injector
  - setInjector
```
void setInjector(Injector injector)
```
    Sets the injector to use
  - getLifecycleStrategies
```
List<LifecycleStrategy> getLifecycleStrategies()
```
    Returns the lifecycle strategies used to handle lifecycle notifications
    
    Returns:
    
    the lifecycle strategies
  - addLifecycleStrategy
```
void addLifecycleStrategy(LifecycleStrategy lifecycleStrategy)
```
    Adds the given lifecycle strategy to be used.
    
    Parameters:
    
    lifecycleStrategy - the strategy
  - resolveLanguage
```
Language resolveLanguage(String language)
                  throws NoSuchLanguageException
```
    Resolves a language for creating expressions
    
    Parameters:
    
    language - name of the language
    
    Returns:
    
    the resolved language
    
    Throws:
    
    NoSuchLanguageException - is thrown if language could not be resolved
  - resolvePropertyPlaceholders
```
String resolvePropertyPlaceholders(String text)
```
    Parses the given text and resolve any property placeholders - using {{key}}.
    
    Parameters:
    
    text - the text such as an endpoint uri or the likes
    
    Returns:
    
    the text with resolved property placeholders
    
    Throws:
    
    IllegalArgumentException - is thrown if property placeholders was used and there was an error resolving them
  - getPropertiesComponent
```
PropertiesComponent getPropertiesComponent()
```
    Returns the configured properties component or create one if none has been configured.
    
    Returns:
    
    the properties component
  - setPropertiesComponent
```
void setPropertiesComponent(PropertiesComponent propertiesComponent)
```
    Sets a custom properties component to be used.
  - getLanguageNames
```
@Deprecated
List<String> getLanguageNames()
```
    Deprecated. not in use
    
    Gets a readonly list with the names of the languages currently registered.
    
    Returns:
    
    a readonly list with the names of the languages
  - createProducerTemplate
```
ProducerTemplate createProducerTemplate()
```
    Creates a new ProducerTemplate which is started and therefore ready to use right away.
    See this FAQ before use: Why does Camel use too many threads with ProducerTemplate?
    Important: Make sure to call Service.stop() when you are done using the template, to clean up any resources.
    Will use cache size defined in Camel property with key Exchange.MAXIMUM_CACHE_POOL_SIZE. If no key was defined then it will fallback to a default size of 1000. You can also use the ProducerTemplate.setMaximumCacheSize(int) method to use a custom value before starting the template.
    
    Returns:
    
    the template
    
    Throws:
    
    RuntimeCamelException - is thrown if error starting the template
  - createProducerTemplate
```
ProducerTemplate createProducerTemplate(int maximumCacheSize)
```
    Creates a new ProducerTemplate which is started and therefore ready to use right away.
    See this FAQ before use: Why does Camel use too many threads with ProducerTemplate?
    Important: Make sure to call Service.stop() when you are done using the template, to clean up any resources.
    
    Parameters:
    
    maximumCacheSize - the maximum cache size
    
    Returns:
    
    the template
    
    Throws:
    
    RuntimeCamelException - is thrown if error starting the template
  - createFluentProducerTemplate
```
FluentProducerTemplate createFluentProducerTemplate()
```
    Creates a new FluentProducerTemplate which is started and therefore ready to use right away.
    See this FAQ before use: Why does Camel use too many threads with ProducerTemplate?
    Important: Make sure to call Service.stop() when you are done using the template, to clean up any resources.
    Will use cache size defined in Camel property with key Exchange.MAXIMUM_CACHE_POOL_SIZE. If no key was defined then it will fallback to a default size of 1000. You can also use the FluentProducerTemplate.setMaximumCacheSize(int) method to use a custom value before starting the template.
    
    Returns:
    
    the template
    
    Throws:
    
    RuntimeCamelException - is thrown if error starting the template
  - createFluentProducerTemplate
```
FluentProducerTemplate createFluentProducerTemplate(int maximumCacheSize)
```
    Creates a new FluentProducerTemplate which is started and therefore ready to use right away.
    See this FAQ before use: Why does Camel use too many threads with ProducerTemplate?
    Important: Make sure to call Service.stop() when you are done using the template, to clean up any resources.
    
    Parameters:
    
    maximumCacheSize - the maximum cache size
    
    Returns:
    
    the template
    
    Throws:
    
    RuntimeCamelException - is thrown if error starting the template
  - createConsumerTemplate
```
ConsumerTemplate createConsumerTemplate()
```
    Creates a new ConsumerTemplate which is started and therefore ready to use right away.
    See this FAQ before use: Why does Camel use too many threads with ProducerTemplate? as it also applies for ConsumerTemplate.
    Important: Make sure to call Service.stop() when you are done using the template, to clean up any resources.
    Will use cache size defined in Camel property with key Exchange.MAXIMUM_CACHE_POOL_SIZE. If no key was defined then it will fallback to a default size of 1000. You can also use the ConsumerTemplate.setMaximumCacheSize(int) method to use a custom value before starting the template.
    
    Returns:
    
    the template
    
    Throws:
    
    RuntimeCamelException - is thrown if error starting the template
  - createConsumerTemplate
```
ConsumerTemplate createConsumerTemplate(int maximumCacheSize)
```
    Creates a new ConsumerTemplate which is started and therefore ready to use right away.
    See this FAQ before use: Why does Camel use too many threads with ProducerTemplate? as it also applies for ConsumerTemplate.
    Important: Make sure to call Service.stop() when you are done using the template, to clean up any resources.
    
    Parameters:
    
    maximumCacheSize - the maximum cache size
    
    Returns:
    
    the template
    
    Throws:
    
    RuntimeCamelException - is thrown if error starting the template
  - resolveDataFormat
```
DataFormat resolveDataFormat(String name)
```
    Resolve a data format given its name
    
    Parameters:
    
    name - the data format name or a reference to it in the Registry
    
    Returns:
    
    the resolved data format, or null if not found
  - createDataFormat
```
DataFormat createDataFormat(String name)
```
    Creates the given data format given its name.
    
    Parameters:
    
    name - the data format name or a reference to a data format factory in the Registry
    
    Returns:
    
    the resolved data format, or null if not found
  - resolveTransformer
```
Transformer resolveTransformer(String model)
```
    Resolve a transformer given a scheme
    
    Parameters:
    
    model - data model name.
    
    Returns:
    
    the resolved transformer, or null if not found
  - resolveTransformer
```
Transformer resolveTransformer(DataType from,
                               DataType to)
```
    Resolve a transformer given from/to data type.
    
    Parameters:
    
    from - from data type
    
    to - to data type
    
    Returns:
    
    the resolved transformer, or null if not found
  - getTransformerRegistry
```
TransformerRegistry getTransformerRegistry()
```
    Gets the TransformerRegistry
    
    Returns:
    
    the TransformerRegistry
  - resolveValidator
```
Validator resolveValidator(DataType type)
```
    Resolve a validator given from/to data type.
    
    Parameters:
    
    type - the data type
    
    Returns:
    
    the resolved validator, or null if not found
  - getValidatorRegistry
```
ValidatorRegistry getValidatorRegistry()
```
    Gets the ValidatorRegistry
    
    Returns:
    
    the ValidatorRegistry
  - setGlobalOptions
```
void setGlobalOptions(Map<String,String> globalOptions)
```
    Sets global options that can be referenced in the camel context
    Important: This has nothing to do with property placeholders, and is just a plain set of key/value pairs which are used to configure global options on CamelContext, such as a maximum debug logging length etc. For property placeholders use resolvePropertyPlaceholders(String) method and see more details at the property placeholder documentation.
    
    Parameters:
    
    globalOptions - global options that can be referenced in the camel context
  - getGlobalOptions
```
Map<String,String> getGlobalOptions()
```
    Gets global options that can be referenced in the camel context.
    Important: This has nothing to do with property placeholders, and is just a plain set of key/value pairs which are used to configure global options on CamelContext, such as a maximum debug logging length etc. For property placeholders use resolvePropertyPlaceholders(String) method and see more details at the property placeholder documentation.
    
    Returns:
    
    global options for this context
  - getGlobalOption
```
String getGlobalOption(String key)
```
    Gets the global option value that can be referenced in the camel context
    Important: This has nothing to do with property placeholders, and is just a plain set of key/value pairs which are used to configure global options on CamelContext, such as a maximum debug logging length etc. For property placeholders use resolvePropertyPlaceholders(String) method and see more details at the property placeholder documentation.
    
    Returns:
    
    the string value of the global option
  - getClassResolver
```
ClassResolver getClassResolver()
```
    Returns the class resolver to be used for loading/lookup of classes.
    
    Returns:
    
    the resolver
  - setClassResolver
```
void setClassResolver(ClassResolver resolver)
```
    Sets the class resolver to be use
    
    Parameters:
    
    resolver - the resolver
  - getManagementStrategy
```
ManagementStrategy getManagementStrategy()
```
    Gets the management strategy
    
    Returns:
    
    the management strategy
  - setManagementStrategy
```
void setManagementStrategy(ManagementStrategy strategy)
```
    Sets the management strategy to use
    
    Parameters:
    
    strategy - the management strategy
  - disableJMX
```
void disableJMX()
         throws IllegalStateException
```
    Disables using JMX as ManagementStrategy.
    Important: This method must be called before the CamelContext is started.
    
    Throws:
    
    IllegalStateException - is thrown if the CamelContext is not in stopped state.
  - getInflightRepository
```
InflightRepository getInflightRepository()
```
    Gets the inflight repository
    
    Returns:
    
    the repository
  - setInflightRepository
```
void setInflightRepository(InflightRepository repository)
```
    Sets a custom inflight repository to use
    
    Parameters:
    
    repository - the repository
  - getApplicationContextClassLoader
```
ClassLoader getApplicationContextClassLoader()
```
    Gets the application CamelContext class loader which may be helpful for running camel in other containers
    
    Returns:
    
    the application CamelContext class loader
  - setApplicationContextClassLoader
```
void setApplicationContextClassLoader(ClassLoader classLoader)
```
    Sets the application CamelContext class loader
    
    Parameters:
    
    classLoader - the class loader
  - getShutdownStrategy
```
ShutdownStrategy getShutdownStrategy()
```
    Gets the current shutdown strategy
    
    Returns:
    
    the strategy
  - setShutdownStrategy
```
void setShutdownStrategy(ShutdownStrategy shutdownStrategy)
```
    Sets a custom shutdown strategy
    
    Parameters:
    
    shutdownStrategy - the custom strategy
  - getExecutorServiceManager
```
ExecutorServiceManager getExecutorServiceManager()
```
    Gets the current ExecutorServiceManager
    
    Returns:
    
    the manager
  - setExecutorServiceManager
```
void setExecutorServiceManager(ExecutorServiceManager executorServiceManager)
```
    Sets a custom ExecutorServiceManager
    
    Parameters:
    
    executorServiceManager - the custom manager
  - getMessageHistoryFactory
```
MessageHistoryFactory getMessageHistoryFactory()
```
    Gets the current MessageHistoryFactory
    
    Returns:
    
    the factory
  - setMessageHistoryFactory
```
void setMessageHistoryFactory(MessageHistoryFactory messageHistoryFactory)
```
    Sets a custom MessageHistoryFactory
    
    Parameters:
    
    messageHistoryFactory - the custom factory
  - getDebugger
```
Debugger getDebugger()
```
    Gets the current Debugger
    
    Returns:
    
    the debugger
  - setDebugger
```
void setDebugger(Debugger debugger)
```
    Sets a custom Debugger
    
    Parameters:
    
    debugger - the debugger
  - getTracer
```
Tracer getTracer()
```
    Gets the current Tracer
    
    Returns:
    
    the tracer
  - setTracer
```
void setTracer(Tracer tracer)
```
    Sets a custom Tracer
  - getUuidGenerator
```
UuidGenerator getUuidGenerator()
```
    Gets the current UuidGenerator
    
    Returns:
    
    the uuidGenerator
  - setUuidGenerator
```
void setUuidGenerator(UuidGenerator uuidGenerator)
```
    Sets a custom UuidGenerator (should only be set once)
    
    Parameters:
    
    uuidGenerator - the UUID Generator
  - isLoadTypeConverters
```
Boolean isLoadTypeConverters()
```
    Whether to load custom type converters by scanning classpath. This is used for backwards compatibility with Camel 2.x. Its recommended to migrate to use fast type converter loading by setting @Converter(loader = true) on your custom type converter classes.
  - setLoadTypeConverters
```
void setLoadTypeConverters(Boolean loadTypeConverters)
```
    Whether to load custom type converters by scanning classpath. This is used for backwards compatibility with Camel 2.x. Its recommended to migrate to use fast type converter loading by setting @Converter(loader = true) on your custom type converter classes.
    
    Parameters:
    
    loadTypeConverters - whether to load custom type converters using classpath scanning.
  - isTypeConverterStatisticsEnabled
```
Boolean isTypeConverterStatisticsEnabled()
```
    Whether or not type converter statistics is enabled.
    By default the type converter utilization statistics is disabled. Notice: If enabled then there is a slight performance impact under very heavy load.
    
    Returns:
    
    true if enabled, false if disabled (default).
  - setTypeConverterStatisticsEnabled
```
void setTypeConverterStatisticsEnabled(Boolean typeConverterStatisticsEnabled)
```
    Sets whether or not type converter statistics is enabled.
    By default the type converter utilization statistics is disabled. Notice: If enabled then there is a slight performance impact under very heavy load.
    You can enable/disable the statistics at runtime using the org.apache.camel.spi.TypeConverterRegistry#getStatistics()#setTypeConverterStatisticsEnabled(Boolean) method, or from JMX on the org.apache.camel.api.management.mbean.ManagedTypeConverterRegistryMBean mbean.
    
    Parameters:
    
    typeConverterStatisticsEnabled - true to enable, false to disable
  - isUseMDCLogging
```
Boolean isUseMDCLogging()
```
    Whether or not MDC logging is being enabled.
    
    Returns:
    
    true if MDC logging is enabled
  - setUseMDCLogging
```
void setUseMDCLogging(Boolean useMDCLogging)
```
    Set whether MDC is enabled.
    
    Parameters:
    
    useMDCLogging - true to enable MDC logging, false to disable
  - getMDCLoggingKeysPattern
```
String getMDCLoggingKeysPattern()
```
    Gets the pattern used for determine which custom MDC keys to propagate during message routing when the routing engine continues routing asynchronously for the given message. Setting this pattern to * will propagate all custom keys. Or setting the pattern to foo*,bar* will propagate any keys starting with either foo or bar. Notice that a set of standard Camel MDC keys are always propagated which starts with camel. as key name.
    The match rules are applied in this order (case insensitive):
    - exact match, returns true
    - wildcard match (pattern ends with a * and the name starts with the pattern), returns true
    - regular expression match, returns true
    - otherwise returns false
  - setMDCLoggingKeysPattern
```
void setMDCLoggingKeysPattern(String pattern)
```
    Sets the pattern used for determine which custom MDC keys to propagate during message routing when the routing engine continues routing asynchronously for the given message. Setting this pattern to * will propagate all custom keys. Or setting the pattern to foo*,bar* will propagate any keys starting with either foo or bar. Notice that a set of standard Camel MDC keys are always propagated which starts with camel. as key name.
    The match rules are applied in this order (case insensitive):
    - exact match, returns true
    - wildcard match (pattern ends with a * and the name starts with the pattern), returns true
    - regular expression match, returns true
    - otherwise returns false
    Parameters:
    
    pattern - the pattern
  - isUseDataType
```
Boolean isUseDataType()
```
    Whether to enable using data type on Camel messages.
    Data type are automatic turned on if one ore more routes has been explicit configured with input and output types. Otherwise data type is default off.
    
    Returns:
    
    true if data type is enabled
  - setUseDataType
```
void setUseDataType(Boolean useDataType)
```
    Whether to enable using data type on Camel messages.
    Data type are automatic turned on if one ore more routes has been explicit configured with input and output types. Otherwise data type is default off.
    
    Parameters:
    
    useDataType - true to enable data type on Camel messages.
  - isUseBreadcrumb
```
Boolean isUseBreadcrumb()
```
    Whether or not breadcrumb is enabled.
    
    Returns:
    
    true if breadcrumb is enabled
  - setUseBreadcrumb
```
void setUseBreadcrumb(Boolean useBreadcrumb)
```
    Set whether breadcrumb is enabled.
    
    Parameters:
    
    useBreadcrumb - true to enable breadcrumb, false to disable
  - getStreamCachingStrategy
```
StreamCachingStrategy getStreamCachingStrategy()
```
    Gets the StreamCachingStrategy to use.
  - setStreamCachingStrategy
```
void setStreamCachingStrategy(StreamCachingStrategy streamCachingStrategy)
```
    Sets a custom StreamCachingStrategy to use.
  - getRuntimeEndpointRegistry
```
RuntimeEndpointRegistry getRuntimeEndpointRegistry()
```
    Gets the RuntimeEndpointRegistry to use, or null if none is in use.
  - setRuntimeEndpointRegistry
```
void setRuntimeEndpointRegistry(RuntimeEndpointRegistry runtimeEndpointRegistry)
```
    Sets a custom RuntimeEndpointRegistry to use.
  - setSSLContextParameters
```
void setSSLContextParameters(SSLContextParameters sslContextParameters)
```
    Sets the global SSL context parameters.
  - getSSLContextParameters
```
SSLContextParameters getSSLContextParameters()
```
    Gets the global SSL context parameters if configured.

Interface CamelContext

Method Summary

Methods inherited from interface org.apache.camel.CamelContextLifecycle

Methods inherited from interface org.apache.camel.RuntimeConfiguration

Method Detail

adapt

getExtension

setExtension

isVetoStarted

getName

getNameStrategy

setNameStrategy

getManagementNameStrategy

setManagementNameStrategy

getManagementName

setManagementName

getVersion

getUptime

getUptimeMillis

getStartDate

addService

addService

addService

addPrototypeService

removeService

hasService

hasService

hasServices

deferStartService

addStartupListener

addComponent

hasComponent

getComponent

getComponent

getComponent

getComponent

getComponentNames

removeComponent

getEndpointRegistry

getEndpoint

getEndpoint

getEndpoint

getEndpoints

getEndpointMap

hasEndpoint

addEndpoint

removeEndpoint

removeEndpoints

getGlobalEndpointConfiguration

setRouteController

getRouteController

getRoutes

getRoutesSize

getRoute

getProcessor

getProcessor

addRoutes

removeRoute

addRoutePolicyFactory

getRoutePolicyFactories

setRestConfiguration

getRestConfiguration

getRestRegistry

setRestRegistry

getTypeConverter

getTypeConverterRegistry

setTypeConverterRegistry

getRegistry

getRegistry

getInjector

setInjector

getLifecycleStrategies

addLifecycleStrategy

resolveLanguage

resolvePropertyPlaceholders

getPropertiesComponent

setPropertiesComponent

getLanguageNames

createProducerTemplate

createProducerTemplate