Package org.mariadb.jdbc

Class Statement

    • Constructor Summary

      Constructors 
      Constructor Description
      Statement​(Connection con, ReentrantLock lock, boolean canUseServerTimeout, boolean canUseServerMaxRows, int autoGeneratedKeys, int resultSetType, int resultSetConcurrency, int defaultFetchSize)  

    • Method Summary

      All Methods Instance Methods Concrete Methods 
      Modifier and Type Method Description
      void abort()  
      void addBatch​(String sql)
      Adds the given SQL command to the current list of commands for this Statement object.
      void cancel()
      Cancels this Statement object if both the DBMS and driver support aborting an SQL statement.
      protected void checkNotClosed()
      Check if statement is closed, and throw exception if so.
      void clearBatch()
      Empties this Statement object's current list of SQL commands.
      void clearWarnings()
      Clears all the warnings reported on this Statement object.
      void close()
      Releases this Statement object's database and JDBC resources immediately instead of waiting for this to happen when it is automatically closed.
      void closeOnCompletion()
      Specifies that this Statement will be closed when all its dependent result sets are closed.
      protected String escapeTimeout​(String sql)  
      protected ExceptionFactory exceptionFactory()  
      boolean execute​(String sql)
      Executes the given SQL statement, which may return multiple results.
      boolean execute​(String sql, int autoGeneratedKeys)
      Executes the given SQL statement, which may return multiple results, and signals the driver that any auto-generated keys should be made available for retrieval.
      boolean execute​(String sql, int[] columnIndexes)
      Executes the given SQL statement, which may return multiple results, and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval.
      boolean execute​(String sql, String[] columnNames)
      Executes the given SQL statement, which may return multiple results, and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval.
      int[] executeBatch()
      Submits a batch of commands to the database for execution and if all commands execute successfully, returns an array of update counts.
      List<Completion> executeInternalBatchPipeline()  
      List<Completion> executeInternalBatchStandard()  
      long[] executeLargeBatch()
      Execute batch, like executeBatch(), with returning results with long[].
      long executeLargeUpdate​(String sql)
      Executes the given SQL statement, which may be an INSERT, UPDATE, or DELETE statement or an SQL statement that returns nothing, such as an SQL DDL statement.
      long executeLargeUpdate​(String sql, int autoGeneratedKeys)
      Identical to executeLargeUpdate(String sql), with a flag that indicate that autoGeneratedKeys (primary key fields with "auto_increment") generated id's must be retrieved.
      long executeLargeUpdate​(String sql, int[] columnIndexes)
      Identical to executeLargeUpdate(String sql, int autoGeneratedKeys) with autoGeneratedKeys = Statement.RETURN_GENERATED_KEYS set.
      long executeLargeUpdate​(String sql, String[] columnNames)
      Identical to executeLargeUpdate(String sql, int autoGeneratedKeys) with autoGeneratedKeys = Statement.RETURN_GENERATED_KEYS set.
      ResultSet executeQuery​(String sql)
      Executes the given SQL statement, which returns a single ResultSet object.
      int executeUpdate​(String sql)
      Executes the given SQL statement, which may be an INSERT, UPDATE, or DELETE statement or an SQL statement that returns nothing, such as an SQL DDL statement.
      int executeUpdate​(String sql, int autoGeneratedKeys)
      Executes the given SQL statement and signals the driver with the given flag about whether the auto-generated keys produced by this Statement object should be made available for retrieval.
      int executeUpdate​(String sql, int[] columnIndexes)
      Executes the given SQL statement and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval.
      int executeUpdate​(String sql, String[] columnNames)
      Executes the given SQL statement and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval.
      void fetchRemaining()
      Permit to streaming result to fetch remaining results.
      Connection getConnection()
      Retrieves the Connection object that produced this Statement object.
      int getFetchDirection()
      Retrieves the direction for fetching rows from database tables that is the default for result sets generated from this Statement object.
      int getFetchSize()
      Retrieves the number of result set rows that is the default fetch size for ResultSet objects generated from this Statement object.
      ResultSet getGeneratedKeys()
      Retrieves any auto-generated keys created as a result of executing this Statement object.
      long getLargeMaxRows()
      Retrieves the maximum number of rows that a ResultSet object produced by this Statement object can contain.
      long getLargeUpdateCount()
      Retrieves the current result as an update count; if the result is a ResultSet object or there are no more results, -1 is returned.
      int getMaxFieldSize()
      Retrieves the maximum number of bytes that can be returned for character and binary column values in a ResultSet object produced by this Statement object.
      int getMaxRows()
      Retrieves the maximum number of rows that a ResultSet object produced by this Statement object can contain.
      boolean getMoreResults()
      Moves to this Statement object's next result, returns true if it is a ResultSet object, and implicitly closes any current ResultSet object(s) obtained with the method getResultSet.
      boolean getMoreResults​(int current)
      Moves to this Statement object's next result, deals with any current ResultSet object(s) according to the instructions specified by the given flag, and returns true if the next result is a ResultSet object.
      int getQueryTimeout()
      Retrieves the number of seconds the driver will wait for a Statement object to execute.
      ResultSet getResultSet()
      Retrieves the current result as a ResultSet object.
      int getResultSetConcurrency()
      Retrieves the result set concurrency for ResultSet objects generated by this Statement object.
      int getResultSetHoldability()
      Retrieves the result set holdability for ResultSet objects generated by this Statement object.
      int getResultSetType()
      Retrieves the result set type for ResultSet objects generated by this Statement object.
      int getUpdateCount()
      Retrieves the current result as an update count; if the result is a ResultSet object or there are no more results, -1 is returned.
      SQLWarning getWarnings()
      Retrieves the first warning reported by calls on this Statement object.
      boolean isClosed()
      Retrieves whether this Statement object has been closed.
      boolean isCloseOnCompletion()
      Returns a value indicating whether this Statement will be closed when all its dependent result sets are closed.
      boolean isPoolable()
      Returns a value indicating whether the Statement is poolable or not.
      boolean isWrapperFor​(Class<?> iface)
      Returns true if this either implements the interface argument or is directly or indirectly a wrapper for an object that does.
      void setCursorName​(String name)
      Sets the SQL cursor name to the given String, which will be used by subsequent Statement object execute methods.
      void setEscapeProcessing​(boolean enable)
      Sets escape processing on or off.
      void setFetchDirection​(int direction)
      Gives the driver a hint as to the direction in which rows will be processed in ResultSet objects created using this Statement object.
      void setFetchSize​(int rows)
      Gives the JDBC driver a hint as to the number of rows that should be fetched from the database when more rows are needed for ResultSet objects generated by this Statement .
      void setLargeMaxRows​(long max)
      Sets the limit for the maximum number of rows that any ResultSet object generated by this Statement object can contain to the given number.
      void setMaxFieldSize​(int max)
      NOT SUPPORTED.
      void setMaxRows​(int max)
      Sets the limit for the maximum number of rows that any ResultSet object generated by this Statement object can contain to the given number.
      void setPoolable​(boolean poolable)
      Requests that a Statement be pooled or not pooled.
      void setQueryTimeout​(int seconds)
      Sets the number of seconds the driver will wait for a Statement object to execute to the given number of seconds.
      <T> T unwrap​(Class<T> iface)
      Returns an object that implements the given interface to allow access to non-standard methods, or standard methods not exposed by the proxy.

    • Field Detail

      • resultSetType

        protected final int resultSetType

      • resultSetConcurrency

        protected final int resultSetConcurrency

      • canUseServerTimeout

        protected final boolean canUseServerTimeout

      • canUseServerMaxRows

        protected final boolean canUseServerMaxRows

      • queryTimeout

        protected int queryTimeout

      • maxRows

        protected long maxRows

      • fetchSize

        protected int fetchSize

      • autoGeneratedKeys

        protected int autoGeneratedKeys

      • closeOnCompletion

        protected boolean closeOnCompletion

      • closed

        protected boolean closed

      • escape

        protected boolean escape

    • Constructor Detail

      • Statement

        public Statement​(Connection con,
                 ReentrantLock lock,
                 boolean canUseServerTimeout,
                 boolean canUseServerMaxRows,
                 int autoGeneratedKeys,
                 int resultSetType,
                 int resultSetConcurrency,
                 int defaultFetchSize)

    • Method Detail

      • executeQuery

        public ResultSet executeQuery​(String sql)
                       throws SQLException
        Executes the given SQL statement, which returns a single ResultSet object.

        Note:This method cannot be called on a PreparedStatement or CallableStatement.

        Specified by:
        executeQuery in interface Statement
        Parameters:
        sql - an SQL statement to be sent to the database, typically a static SQL SELECT statement
        Returns:
        a ResultSet object that contains the data produced by the given query; never null
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement, the given SQL statement produces anything other than a single ResultSet object, the method is called on a PreparedStatement or CallableStatement
        SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement

      • executeUpdate

        public int executeUpdate​(String sql)
                  throws SQLException
        Executes the given SQL statement, which may be an INSERT, UPDATE, or DELETE statement or an SQL statement that returns nothing, such as an SQL DDL statement.

        Note:This method cannot be called on a PreparedStatement or CallableStatement.

        Specified by:
        executeUpdate in interface Statement
        Parameters:
        sql - an SQL Data Manipulation Language (DML) statement, such as INSERT, UPDATE or DELETE; or an SQL statement that returns nothing, such as a DDL statement.
        Returns:
        either (1) the row count for SQL Data Manipulation Language (DML) statements or (2) 0 for SQL statements that return nothing
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement, the given SQL statement produces a ResultSet object, the method is called on a PreparedStatement or CallableStatement
        SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement

      • close

        public void close()
           throws SQLException
        Releases this Statement object's database and JDBC resources immediately instead of waiting for this to happen when it is automatically closed. It is generally good practice to release resources as soon as you are finished with them to avoid tying up database resources.

        Calling the method close on a Statement object that is already closed has no effect.

        Note:When a Statement object is closed, its current ResultSet object, if one exists, is also closed.

        Specified by:
        close in interface AutoCloseable
        Specified by:
        close in interface Statement
        Throws:
        SQLException - if a database access error occurs

      • abort

        public void abort()

      • getMaxFieldSize

        public int getMaxFieldSize()
        Retrieves the maximum number of bytes that can be returned for character and binary column values in a ResultSet object produced by this Statement object. This limit applies only to BINARY, VARBINARY, LONGVARBINARY, CHAR, VARCHAR, NCHAR, NVARCHAR, LONGNVARCHAR and LONGVARCHAR columns. If the limit is exceeded, the excess data is silently discarded.
        Specified by:
        getMaxFieldSize in interface Statement
        Returns:
        the current column size limit for columns storing character and binary values; zero means there is no limit
        See Also:
        setMaxFieldSize(int)

      • getMaxRows

        public int getMaxRows()
               throws SQLException
        Retrieves the maximum number of rows that a ResultSet object produced by this Statement object can contain. If this limit is exceeded, the excess rows are silently dropped.
        Specified by:
        getMaxRows in interface Statement
        Returns:
        the current maximum number of rows for a ResultSet object produced by this Statement object; zero means there is no limit
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement
        See Also:
        setMaxRows(int)

      • setMaxRows

        public void setMaxRows​(int max)
                throws SQLException
        Sets the limit for the maximum number of rows that any ResultSet object generated by this Statement object can contain to the given number. If the limit is exceeded, the excess rows are silently dropped.
        Specified by:
        setMaxRows in interface Statement
        Parameters:
        max - the new max rows limit; zero means there is no limit
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement or the condition max >= 0 is not satisfied
        See Also:
        getMaxRows()

      • setEscapeProcessing

        public void setEscapeProcessing​(boolean enable)
                         throws SQLException
        Sets escape processing on or off. If escape scanning is on (the default), the driver will do escape substitution before sending the SQL statement to the database.

        The Connection and DataSource property escapeProcessing may be used to change the default escape processing behavior. A value of true (the default) enables escape Processing for all Statement objects. A value of false disables escape processing for all Statement objects. The setEscapeProcessing method may be used to specify the escape processing behavior for an individual Statement object.

        Note: Since prepared statements have usually been parsed prior to making this call, disabling escape processing for PreparedStatements objects will have no effect.

        Specified by:
        setEscapeProcessing in interface Statement
        Parameters:
        enable - true to enable escape processing; false to disable it
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement

      • getQueryTimeout

        public int getQueryTimeout()
                    throws SQLException
        Retrieves the number of seconds the driver will wait for a Statement object to execute. If the limit is exceeded, a SQLException is thrown.
        Specified by:
        getQueryTimeout in interface Statement
        Returns:
        the current query timeout limit in seconds; zero means there is no limit
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement
        See Also:
        setQueryTimeout(int)

      • setQueryTimeout

        public void setQueryTimeout​(int seconds)
                     throws SQLException
        Sets the number of seconds the driver will wait for a Statement object to execute to the given number of seconds. By default, there is no limit on the amount of time allowed for a running statement to complete. If the limit is exceeded, an SQLTimeoutException is thrown. A JDBC driver must apply this limit to the execute, executeQuery and executeUpdate methods.

        Note: JDBC driver implementations may also apply this limit to ResultSet methods (consult your driver vendor documentation for details).

        Note: In the case of Statement batching, it is implementation defined whether the time-out is applied to individual SQL commands added via the addBatch method or to the entire batch of SQL commands invoked by the executeBatch method (consult your driver vendor documentation for details).

        Specified by:
        setQueryTimeout in interface Statement
        Parameters:
        seconds - the new query timeout limit in seconds; zero means there is no limit
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement or the condition seconds >= 0 is not satisfied
        See Also:
        getQueryTimeout()

      • cancel

        public void cancel()
            throws SQLException
        Cancels this Statement object if both the DBMS and driver support aborting an SQL statement. This method can be used by one thread to cancel a statement that is being executed by another thread.
        Specified by:
        cancel in interface Statement
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method

      • getWarnings

        public SQLWarning getWarnings()
                       throws SQLException
        Retrieves the first warning reported by calls on this Statement object. Subsequent Statement object warnings will be chained to this SQLWarning object.

        The warning chain is automatically cleared each time a statement is (re)executed. This method may not be called on a closed Statement object; doing so will cause an SQLException to be thrown.

        Note: If you are processing a ResultSet object, any warnings associated with reads on that ResultSet object will be chained on it rather than on the Statement object that produced it.

        Specified by:
        getWarnings in interface Statement
        Returns:
        the first SQLWarning object or null if there are no warnings
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement

      • clearWarnings

        public void clearWarnings()
        Clears all the warnings reported on this Statement object. After a call to this method, the method getWarnings will return null until a new warning is reported for this Statement object.
        Specified by:
        clearWarnings in interface Statement

      • setCursorName

        public void setCursorName​(String name)
                   throws SQLException
        Sets the SQL cursor name to the given String, which will be used by subsequent Statement object execute methods. This name can then be used in SQL positioned update or delete statements to identify the current row in the ResultSet object generated by this statement. If the database does not support positioned update/delete, this method is a noop. To ensure that a cursor has the proper isolation level to support updates, the cursor's SELECT statement should have the form SELECT FOR UPDATE. If FOR UPDATE is not present, positioned updates may fail.

        Note: By definition, the execution of positioned updates and deletes must be done by a different Statement object than the one that generated the ResultSet object being used for positioning. Also, cursor names must be unique within a connection.

        Specified by:
        setCursorName in interface Statement
        Parameters:
        name - the new cursor name, which must be unique within a connection
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method

      • execute

        public boolean execute​(String sql)
                throws SQLException
        Executes the given SQL statement, which may return multiple results. In some (uncommon) situations, a single SQL statement may return multiple result sets and/or update counts. Normally you can ignore this unless you are (1) executing a stored procedure that you know may return multiple results or (2) you are dynamically executing an unknown SQL string.

        The execute method executes an SQL statement and indicates the form of the first result. You must then use the methods getResultSet or getUpdateCount to retrieve the result, and getMoreResults to move to any subsequent result(s).

        Note:This method cannot be called on a PreparedStatement or CallableStatement.

        Specified by:
        execute in interface Statement
        Parameters:
        sql - any SQL statement
        Returns:
        true if the first result is a ResultSet object; false if it is an update count or there are no results
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement, the method is called on a PreparedStatement or CallableStatement
        SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
        See Also:
        getResultSet(), getUpdateCount(), getMoreResults()

      • getResultSet

        public ResultSet getResultSet()
                       throws SQLException
        Retrieves the current result as a ResultSet object. This method should be called only once per result.
        Specified by:
        getResultSet in interface Statement
        Returns:
        the current result as a ResultSet object or null if the result is an update count or there are no more results
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement
        See Also:
        execute(java.lang.String)

      • getUpdateCount

        public int getUpdateCount()
                   throws SQLException
        Retrieves the current result as an update count; if the result is a ResultSet object or there are no more results, -1 is returned. This method should be called only once per result.
        Specified by:
        getUpdateCount in interface Statement
        Returns:
        the current result as an update count; -1 if the current result is a ResultSet object or there are no more results
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement
        See Also:
        execute(java.lang.String)

      • getMoreResults

        public boolean getMoreResults()
                       throws SQLException
        Moves to this Statement object's next result, returns true if it is a ResultSet object, and implicitly closes any current ResultSet object(s) obtained with the method getResultSet.

        There are no more results when the following is true: 

        
 // stmt is a Statement object
 ((stmt.getMoreResults() == false) && (stmt.getUpdateCount() == -1))
        Specified by:
        getMoreResults in interface Statement
        Returns:
        true if the next result is a ResultSet object; false if it is an update count or there are no more results
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement
        See Also:
        execute(java.lang.String)

      • getFetchDirection

        public int getFetchDirection()
        Retrieves the direction for fetching rows from database tables that is the default for result sets generated from this Statement object. If this Statement object has not set a fetch direction by calling the method setFetchDirection, the return value is implementation-specific.
        Specified by:
        getFetchDirection in interface Statement
        Returns:
        the default fetch direction for result sets generated from this Statement object
        Since:
        1.2
        See Also:
        setFetchDirection(int)

      • setFetchDirection

        public void setFetchDirection​(int direction)
        Gives the driver a hint as to the direction in which rows will be processed in ResultSet objects created using this Statement object. The default value is ResultSet.FETCH_FORWARD.

        Note that this method sets the default fetch direction for result sets generated by this Statement object. Each result set has its own methods for getting and setting its own fetch direction.

        Specified by:
        setFetchDirection in interface Statement
        Parameters:
        direction - the initial direction for processing rows

      • getFetchSize

        public int getFetchSize()
                 throws SQLException
        Retrieves the number of result set rows that is the default fetch size for ResultSet objects generated from this Statement object. If this Statement object has not set a fetch size by calling the method setFetchSize, the return value is implementation-specific.
        Specified by:
        getFetchSize in interface Statement
        Returns:
        the default fetch size for result sets generated from this Statement object
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement
        See Also:
        setFetchSize(int)

      • setFetchSize

        public void setFetchSize​(int rows)
                  throws SQLException
        Gives the JDBC driver a hint as to the number of rows that should be fetched from the database when more rows are needed for ResultSet objects generated by this Statement . If the value specified is zero, then the hint is ignored. The default value is zero.
        Specified by:
        setFetchSize in interface Statement
        Parameters:
        rows - the number of rows to fetch
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement or the condition rows >= 0 is not satisfied.
        Since:
        1.2
        See Also:
        getFetchSize()

      • getResultSetConcurrency

        public int getResultSetConcurrency()
                            throws SQLException
        Retrieves the result set concurrency for ResultSet objects generated by this Statement object.
        Specified by:
        getResultSetConcurrency in interface Statement
        Returns:
        either ResultSet.CONCUR_READ_ONLY or ResultSet.CONCUR_UPDATABLE
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement

      • getResultSetType

        public int getResultSetType()
        Retrieves the result set type for ResultSet objects generated by this Statement object.
        Specified by:
        getResultSetType in interface Statement
        Returns:
        one of ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_INSENSITIVE, or ResultSet.TYPE_SCROLL_SENSITIVE
        Since:
        1.2

      • addBatch

        public void addBatch​(String sql)
              throws SQLException
        Adds the given SQL command to the current list of commands for this Statement object. The commands in this list can be executed as a batch by calling the method executeBatch.

        Note:This method cannot be called on a PreparedStatement or CallableStatement.

        Specified by:
        addBatch in interface Statement
        Parameters:
        sql - typically this is an SQL INSERT or UPDATE statement
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement, the driver does not support batch updates, the method is called on a PreparedStatement or CallableStatement
        See Also:
        executeBatch(), DatabaseMetaData.supportsBatchUpdates()

      • executeBatch

        public int[] executeBatch()
                   throws SQLException
        Submits a batch of commands to the database for execution and if all commands execute successfully, returns an array of update counts. The int elements of the array that is returned are ordered to correspond to the commands in the batch, which are ordered according to the order in which they were added to the batch. The elements in the array returned by the method executeBatch may be one of the following:
        1. A number greater than or equal to zero -- indicates that the command was processed successfully and is an update count giving the number of rows in the database that were affected by the command's execution
        2. A value of SUCCESS_NO_INFO -- indicates that the command was processed successfully but that the number of rows affected is unknown

          If one of the commands in a batch update fails to execute properly, this method throws a BatchUpdateException, and a JDBC driver may or may not continue to process the remaining commands in the batch. However, the driver's behavior must be consistent with a particular DBMS, either always continuing to process commands or never continuing to process commands. If the driver continues processing after a failure, the array returned by the method BatchUpdateException.getUpdateCounts will contain as many elements as there are commands in the batch, and at least one of the elements will be the following:

        3. A value of EXECUTE_FAILED -- indicates that the command failed to execute successfully and occurs only if a driver continues to process commands after a command fails

        The possible implementations and return values have been modified in the Java 2 SDK, Standard Edition, version 1.3 to accommodate the option of continuing to process commands in a batch update after a BatchUpdateException object has been thrown.

        Specified by:
        executeBatch in interface Statement
        Returns:
        an array of update counts containing one element for each command in the batch. The elements of the array are ordered according to the order in which commands were added to the batch.
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement or the driver does not support batch statements. Throws BatchUpdateException (a subclass of SQLException) if one of the commands sent to the database fails to execute properly or attempts to return a result set.
        SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
        Since:
        1.2
        See Also:
        addBatch(java.lang.String), DatabaseMetaData.supportsBatchUpdates()

      • getConnection

        public Connection getConnection()
                         throws SQLException
        Retrieves the Connection object that produced this Statement object.
        Specified by:
        getConnection in interface Statement
        Returns:
        the connection that produced this statement
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement
        Since:
        1.2

      • getMoreResults

        public boolean getMoreResults​(int current)
                       throws SQLException
        Moves to this Statement object's next result, deals with any current ResultSet object(s) according to the instructions specified by the given flag, and returns true if the next result is a ResultSet object.

        There are no more results when the following is true: 

        
 // stmt is a Statement object
 ((stmt.getMoreResults(current) == false) && (stmt.getUpdateCount() == -1))
        Specified by:
        getMoreResults in interface Statement
        Parameters:
        current - one of the following Statement constants indicating what should happen to current ResultSet objects obtained using the method getResultSet: Statement.CLOSE_CURRENT_RESULT, Statement.KEEP_CURRENT_RESULT, or Statement.CLOSE_ALL_RESULTS
        Returns:
        true if the next result is a ResultSet object; false if it is an update count or there are no more results
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement or the argument supplied is not one of the following: Statement.CLOSE_CURRENT_RESULT, Statement.KEEP_CURRENT_RESULT or Statement.CLOSE_ALL_RESULTS
        SQLFeatureNotSupportedException - if DatabaseMetaData.supportsMultipleOpenResults returns false and either Statement.KEEP_CURRENT_RESULT or Statement.CLOSE_ALL_RESULTS are supplied as the argument.
        Since:
        1.4
        See Also:
        execute(java.lang.String)

      • fetchRemaining

        public void fetchRemaining()
                    throws SQLException
        Permit to streaming result to fetch remaining results.
        Throws:
        SQLException - if socket error occurs.

      • getGeneratedKeys

        public ResultSet getGeneratedKeys()
                           throws SQLException
        Retrieves any auto-generated keys created as a result of executing this Statement object. If this Statement object did not generate any keys, an empty ResultSet object is returned.

        Note:If the columns which represent the auto-generated keys were not specified, the JDBC driver implementation will determine the columns which best represent the auto-generated keys.

        Specified by:
        getGeneratedKeys in interface Statement
        Returns:
        a ResultSet object containing the auto-generated key(s) generated by the execution of this Statement object
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed Statement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4

      • executeUpdate

        public int executeUpdate​(String sql,
                         int autoGeneratedKeys)
                  throws SQLException
        Executes the given SQL statement and signals the driver with the given flag about whether the auto-generated keys produced by this Statement object should be made available for retrieval. The driver will ignore the flag if the SQL statement is not an INSERT statement, or an SQL statement able to return auto-generated keys (the list of such statements is vendor-specific).

        Note:This method cannot be called on a PreparedStatement or CallableStatement.

        Specified by:
        executeUpdate in interface Statement
        Parameters:
        sql - an SQL Data Manipulation Language (DML) statement, such as INSERT, UPDATE or DELETE; or an SQL statement that returns nothing, such as a DDL statement.
        autoGeneratedKeys - a flag indicating whether auto-generated keys should be made available for retrieval; one of the following constants: Statement.RETURN_GENERATED_KEYS Statement.NO_GENERATED_KEYS
        Returns:
        either (1) the row count for SQL Data Manipulation Language (DML) statements or (2) 0 for SQL statements that return nothing
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement, the given SQL statement returns a ResultSet object, the given constant is not one of those allowed, the method is called on a PreparedStatement or CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method with a constant of Statement.RETURN_GENERATED_KEYS
        SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
        Since:
        1.4

      • executeUpdate

        public int executeUpdate​(String sql,
                         int[] columnIndexes)
                  throws SQLException
        Executes the given SQL statement and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval. This array contains the indexes of the columns in the target table that contain the auto-generated keys that should be made available. The driver will ignore the array if the SQL statement is not an INSERT statement, or an SQL statement able to return auto-generated keys (the list of such statements is vendor-specific).

        Note:This method cannot be called on a PreparedStatement or CallableStatement.

        Specified by:
        executeUpdate in interface Statement
        Parameters:
        sql - an SQL Data Manipulation Language (DML) statement, such as INSERT, UPDATE or DELETE; or an SQL statement that returns nothing, such as a DDL statement.
        columnIndexes - an array of column indexes indicating the columns that should be returned from the inserted row
        Returns:
        either (1) the row count for SQL Data Manipulation Language (DML) statements or (2) 0 for SQL statements that return nothing
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement, the SQL statement returns a ResultSet object,the second argument supplied to this method is not an int array whose elements are valid column indexes, the method is called on a PreparedStatement or CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
        Since:
        1.4

      • executeUpdate

        public int executeUpdate​(String sql,
                         String[] columnNames)
                  throws SQLException
        Executes the given SQL statement and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval. This array contains the names of the columns in the target table that contain the auto-generated keys that should be made available. The driver will ignore the array if the SQL statement is not an INSERT statement, or an SQL statement able to return auto-generated keys (the list of such statements is vendor-specific).

        Note:This method cannot be called on a PreparedStatement or CallableStatement.

        Specified by:
        executeUpdate in interface Statement
        Parameters:
        sql - an SQL Data Manipulation Language (DML) statement, such as INSERT, UPDATE or DELETE; or an SQL statement that returns nothing, such as a DDL statement.
        columnNames - an array of the names of the columns that should be returned from the inserted row
        Returns:
        either the row count for INSERT, UPDATE, or DELETE statements, or 0 for SQL statements that return nothing
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement, the SQL statement returns a ResultSet object, the second argument supplied to this method is not a String array whose elements are valid column names, the method is called on a PreparedStatement or CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
        Since:
        1.4

      • execute

        public boolean execute​(String sql,
                       int autoGeneratedKeys)
                throws SQLException
        Executes the given SQL statement, which may return multiple results, and signals the driver that any auto-generated keys should be made available for retrieval. The driver will ignore this signal if the SQL statement is not an INSERT statement, or an SQL statement able to return auto-generated keys (the list of such statements is vendor-specific).

        In some (uncommon) situations, a single SQL statement may return multiple result sets and/or update counts. Normally you can ignore this unless you are (1) executing a stored procedure that you know may return multiple results or (2) you are dynamically executing an unknown SQL string.

        The execute method executes an SQL statement and indicates the form of the first result. You must then use the methods getResultSet or getUpdateCount to retrieve the result, and getMoreResults to move to any subsequent result(s).

        Note:This method cannot be called on a PreparedStatement or CallableStatement.

        Specified by:
        execute in interface Statement
        Parameters:
        sql - any SQL statement
        autoGeneratedKeys - a constant indicating whether auto-generated keys should be made available for retrieval using the method getGeneratedKeys; one of the following constants: Statement.RETURN_GENERATED_KEYS or Statement.NO_GENERATED_KEYS
        Returns:
        true if the first result is a ResultSet object; false if it is an update count or there are no results
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement, the second parameter supplied to this method is not Statement.RETURN_GENERATED_KEYS or Statement.NO_GENERATED_KEYS, the method is called on a PreparedStatement or CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method with a constant of Statement.RETURN_GENERATED_KEYS
        SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
        Since:
        1.4
        See Also:
        getResultSet(), getUpdateCount(), getMoreResults(), getGeneratedKeys()

      • execute

        public boolean execute​(String sql,
                       int[] columnIndexes)
                throws SQLException
        Executes the given SQL statement, which may return multiple results, and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval. This array contains the indexes of the columns in the target table that contain the auto-generated keys that should be made available. The driver will ignore the array if the SQL statement is not an INSERT statement, or an SQL statement able to return auto-generated keys (the list of such statements is vendor-specific).

        Under some (uncommon) situations, a single SQL statement may return multiple result sets and/or update counts. Normally you can ignore this unless you are (1) executing a stored procedure that you know may return multiple results or (2) you are dynamically executing an unknown SQL string.

        The execute method executes an SQL statement and indicates the form of the first result. You must then use the methods getResultSet or getUpdateCount to retrieve the result, and getMoreResults to move to any subsequent result(s).

        Note:This method cannot be called on a PreparedStatement or CallableStatement.

        Specified by:
        execute in interface Statement
        Parameters:
        sql - any SQL statement
        columnIndexes - an array of the indexes of the columns in the inserted row that should be made available for retrieval by a call to the method getGeneratedKeys
        Returns:
        true if the first result is a ResultSet object; false if it is an update count or there are no results
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement, the elements in the int array passed to this method are not valid column indexes, the method is called on a PreparedStatement or CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
        Since:
        1.4
        See Also:
        getResultSet(), getUpdateCount(), getMoreResults()

      • execute

        public boolean execute​(String sql,
                       String[] columnNames)
                throws SQLException
        Executes the given SQL statement, which may return multiple results, and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval. This array contains the names of the columns in the target table that contain the auto-generated keys that should be made available. The driver will ignore the array if the SQL statement is not an INSERT statement, or an SQL statement able to return auto-generated keys (the list of such statements is vendor-specific).

        In some (uncommon) situations, a single SQL statement may return multiple result sets and/or update counts. Normally you can ignore this unless you are (1) executing a stored procedure that you know may return multiple results or (2) you are dynamically executing an unknown SQL string.

        The execute method executes an SQL statement and indicates the form of the first result. You must then use the methods getResultSet or getUpdateCount to retrieve the result, and getMoreResults to move to any subsequent result(s).

        Note:This method cannot be called on a PreparedStatement or CallableStatement.

        Specified by:
        execute in interface Statement
        Parameters:
        sql - any SQL statement
        columnNames - an array of the names of the columns in the inserted row that should be made available for retrieval by a call to the method getGeneratedKeys
        Returns:
        true if the next result is a ResultSet object; false if it is an update count or there are no more results
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed Statement,the elements of the String array passed to this method are not valid column names, the method is called on a PreparedStatement or CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
        Since:
        1.4
        See Also:
        getResultSet(), getUpdateCount(), getMoreResults(), getGeneratedKeys()

      • getResultSetHoldability

        public int getResultSetHoldability()
        Retrieves the result set holdability for ResultSet objects generated by this Statement object.
        Specified by:
        getResultSetHoldability in interface Statement
        Returns:
        either ResultSet.HOLD_CURSORS_OVER_COMMIT or ResultSet.CLOSE_CURSORS_AT_COMMIT
        Since:
        1.4

      • isClosed

        public boolean isClosed()
        Retrieves whether this Statement object has been closed. A Statement is closed if the method close has been called on it, or if it is automatically closed.
        Specified by:
        isClosed in interface Statement
        Returns:
        true if this Statement object is closed; false if it is still open

      • isPoolable

        public boolean isPoolable()
                   throws SQLException
        Returns a value indicating whether the Statement is poolable or not.

        Specified by:
        isPoolable in interface Statement
        Returns:
        true if the Statement is poolable; false otherwise
        Throws:
        SQLException - if this method is called on a closed Statement
        See Also:
        setPoolable(boolean)

      • setPoolable

        public void setPoolable​(boolean poolable)
                 throws SQLException
        Requests that a Statement be pooled or not pooled. The value specified is a hint to the statement pool implementation indicating whether the application wants the statement to be pooled. It is up to the statement pool manager whether the hint is used.

        The poolable value of a statement is applicable to both internal statement caches implemented by the driver and external statement caches implemented by application servers and other applications.

        By default, a Statement is not poolable when created, and a PreparedStatement and CallableStatement are poolable when created.

        Specified by:
        setPoolable in interface Statement
        Parameters:
        poolable - requests that the statement be pooled if true and that the statement not be pooled if false
        Throws:
        SQLException - if this method is called on a closed Statement

      • closeOnCompletion

        public void closeOnCompletion()
                       throws SQLException
        Specifies that this Statement will be closed when all its dependent result sets are closed. If execution of the Statement does not produce any result sets, this method has no effect.

        Note: Multiple calls to closeOnCompletion do not toggle the effect on this Statement. However, a call to closeOnCompletion does affect both the subsequent execution of statements, and statements that currently have open, dependent, result sets.

        Specified by:
        closeOnCompletion in interface Statement
        Throws:
        SQLException - if this method is called on a closed Statement

      • isCloseOnCompletion

        public boolean isCloseOnCompletion()
                            throws SQLException
        Returns a value indicating whether this Statement will be closed when all its dependent result sets are closed.
        Specified by:
        isCloseOnCompletion in interface Statement
        Returns:
        true if the Statement will be closed when all of its dependent result sets are closed; false otherwise
        Throws:
        SQLException - if this method is called on a closed Statement

      • unwrap

        public <T> T unwrap​(Class<T> iface)
             throws SQLException
        Returns an object that implements the given interface to allow access to non-standard methods, or standard methods not exposed by the proxy.

        If the receiver implements the interface then the result is the receiver or a proxy for the receiver. If the receiver is a wrapper and the wrapped object implements the interface then the result is the wrapped object or a proxy for the wrapped object. Otherwise, return the result of calling unwrap recursively on the wrapped object or a proxy for that result. If the receiver is not a wrapper and does not implement the interface, then an SQLException is thrown.

        Specified by:
        unwrap in interface Wrapper
        Parameters:
        iface - A Class defining an interface that the result must implement.
        Returns:
        an object that implements the interface. Maybe a proxy for the actual implementing object.
        Throws:
        SQLException - If no object found that implements the interface

      • isWrapperFor

        public boolean isWrapperFor​(Class<?> iface)
        Returns true if this either implements the interface argument or is directly or indirectly a wrapper for an object that does. Returns false otherwise. If this implements the interface then return true, else if this is a wrapper then return the result of recursively calling isWrapperFor on the wrapped object. If this does not implement the interface and is not a wrapper, return false. This method should be implemented as a low-cost operation compared to unwrap so that callers can use this method to avoid expensive unwrap calls that may fail. If this method returns true then calling unwrap with the same argument should succeed.
        Specified by:
        isWrapperFor in interface Wrapper
        Parameters:
        iface - a Class defining an interface.
        Returns:
        true if this implements the interface or directly or indirectly wraps an object that does.

      • checkNotClosed

        protected void checkNotClosed()
                       throws SQLException
        Check if statement is closed, and throw exception if so.
        Throws:
        SQLException - if statement close

      • executeLargeUpdate

        public long executeLargeUpdate​(String sql)
                        throws SQLException
        Executes the given SQL statement, which may be an INSERT, UPDATE, or DELETE statement or an SQL statement that returns nothing, such as an SQL DDL statement. This method should be used when the returned row count may exceed Integer.MAX_VALUE.
        Specified by:
        executeLargeUpdate in interface Statement
        Parameters:
        sql - sql command
        Returns:
        update counts
        Throws:
        SQLException - if any error occur during execution

      • executeLargeUpdate

        public long executeLargeUpdate​(String sql,
                               int autoGeneratedKeys)
                        throws SQLException
        Identical to executeLargeUpdate(String sql), with a flag that indicate that autoGeneratedKeys (primary key fields with "auto_increment") generated id's must be retrieved.

        Those id's will be available using getGeneratedKeys() method.

        Specified by:
        executeLargeUpdate in interface Statement
        Parameters:
        sql - sql command
        autoGeneratedKeys - a flag indicating whether auto-generated keys should be made available for retrieval; one of the following constants: Statement.RETURN_GENERATED_KEYS Statement.NO_GENERATED_KEYS
        Returns:
        update counts
        Throws:
        SQLException - if any error occur during execution

      • executeLargeUpdate

        public long executeLargeUpdate​(String sql,
                               int[] columnIndexes)
                        throws SQLException
        Identical to executeLargeUpdate(String sql, int autoGeneratedKeys) with autoGeneratedKeys = Statement.RETURN_GENERATED_KEYS set.
        Specified by:
        executeLargeUpdate in interface Statement
        Parameters:
        sql - sql command
        columnIndexes - column Indexes
        Returns:
        update counts
        Throws:
        SQLException - if any error occur during execution

      • executeLargeUpdate

        public long executeLargeUpdate​(String sql,
                               String[] columnNames)
                        throws SQLException
        Identical to executeLargeUpdate(String sql, int autoGeneratedKeys) with autoGeneratedKeys = Statement.RETURN_GENERATED_KEYS set.
        Specified by:
        executeLargeUpdate in interface Statement
        Parameters:
        sql - sql command
        columnNames - columns names
        Returns:
        update counts
        Throws:
        SQLException - if any error occur during execution

      • getLargeMaxRows

        public long getLargeMaxRows()
                     throws SQLException
        Retrieves the maximum number of rows that a ResultSet object produced by this Statement object can contain. If this limit is exceeded, the excess rows are silently dropped.
        Specified by:
        getLargeMaxRows in interface Statement
        Returns:
        the current maximum number of rows for a ResultSet object produced by this Statement object; zero means there is no limit
        Throws:
        SQLException - if this method is called on a closed Statement

      • setLargeMaxRows

        public void setLargeMaxRows​(long max)
                     throws SQLException
        Sets the limit for the maximum number of rows that any ResultSet object generated by this Statement object can contain to the given number. If the limit is exceeded, the excess rows are silently dropped.
        Specified by:
        setLargeMaxRows in interface Statement
        Parameters:
        max - the new max rows limit; zero means there is no limit
        Throws:
        SQLException - if the condition max >= 0 is not satisfied

      • getLargeUpdateCount

        public long getLargeUpdateCount()
                         throws SQLException
        Retrieves the current result as an update count; if the result is a ResultSet object or there are no more results, -1 is returned.
        Specified by:
        getLargeUpdateCount in interface Statement
        Returns:
        last update count
        Throws:
        SQLException - if this method is called on a closed Statement

      • executeLargeBatch

        public long[] executeLargeBatch()
                         throws SQLException
        Execute batch, like executeBatch(), with returning results with long[]. For when row count may exceed Integer.MAX_VALUE.
        Specified by:
        executeLargeBatch in interface Statement
        Returns:
        an array of update counts (one element for each command in the batch)
        Throws:
        SQLException - if a database error occur.