scala.collection.GenSeqViewLike
A fall back which forces everything into a vector and then applies an operation on it.
The implementation base trait of this view.
Applies a binary operator to a start value and all elements of this general sequence, going left to right.
Applies a binary operator to a start value and all elements of this general sequence, going left to right.
Note: /: is alternate syntax for foldLeft; z /: xs is the same as
xs foldLeft z.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this general sequence,
going left to right with the start value z on the left:
op(...op(op(z, x_1), x_2), ..., x_n)
where x1, ..., xn are the elements of this general sequence.
Applies a binary operator to all elements of this general sequence and a start value, going right to left.
Applies a binary operator to all elements of this general sequence and a start value, going right to left.
Note: :\ is alternate syntax for foldRight; xs :\ z is the same as
xs foldRight z.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value
the binary operator
the result of inserting op between consecutive elements of this general sequence,
going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this general sequence.
Aggregates the results of applying an operator to subsequent elements.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold and reduce. It has similar
semantics, but does not require the result to be a supertype of the
element type. It traverses the elements in different partitions
sequentially, using seqop to update the result, and then applies
combop to results from different partitions. The implementation of
this operation may operate on an arbitrary number of collection
partitions, so combop may be invoked an arbitrary number of times.
For example, one might want to process some elements and then produce
a Set. In this case, seqop would process an element and append it
to the list, while combop would concatenate two lists from different
partitions together. The initial value z would be an empty set.
pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)
Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).
the type of accumulated results
the initial value for the accumulated result of the partition - this
will typically be the neutral element for the seqop operator (e.g.
Nil for list concatenation or 0 for summation)
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
A method that should be called from every well-designed equals method that is open to be overridden in a subclass.
A method that should be called from every well-designed equals method that is open to be overridden in a subclass. See Programming in Scala, Chapter 28 for discussion and design.
the value being probed for possible equality
true if this instance can possibly equal that, otherwise false
Tests whether every element of this general sequence relates to the corresponding element of another sequence by satisfying a test predicate.
Tests whether every element of this general sequence relates to the corresponding element of another sequence by satisfying a test predicate.
the type of the elements of that
the other sequence
the test predicate, which relates elements from both sequences
true if both sequences have the same length and
p(x, y) is true for all corresponding elements x of this general sequence
and y of that, otherwise false.
Counts the number of elements in the general sequence which satisfy a predicate.
Counts the number of elements in the general sequence which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p.
Builds a new general sequence from this general sequence without any duplicate elements.
Builds a new general sequence from this general sequence without any duplicate elements.
Note: will not terminate for infinite-sized collections.
A new general sequence which contains the first occurrence of every element of this general sequence.
Selects all elements except first n ones.
Selects all elements except first n ones.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to drop from this general sequence.
a general sequence consisting of all elements of this general sequence except the first n ones, or else the
empty general sequence, if this general sequence has less than n elements.
Drops longest prefix of elements that satisfy a predicate.
Drops longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The predicate used to test elements.
the longest suffix of this general sequence whose first element
does not satisfy the predicate p.
Tests whether this general sequence ends with the given sequence.
Tests whether this general sequence ends with the given sequence.
Note: will not terminate for infinite-sized collections.
the sequence to test
true if this general sequence has that as a suffix, false otherwise.
Selects all elements of this general sequence which satisfy a predicate.
Selects all elements of this general sequence which satisfy a predicate.
the predicate used to test elements.
a new general sequence consisting of all elements of this general sequence that satisfy the given
predicate p. Their order may not be preserved.
Selects all elements of this general sequence which do not satisfy a predicate.
Selects all elements of this general sequence which do not satisfy a predicate.
the predicate used to test elements.
a new general sequence consisting of all elements of this general sequence that do not satisfy the given
predicate p. Their order may not be preserved.
Finds the first element of the general sequence satisfying a predicate, if any.
Finds the first element of the general sequence satisfying a predicate, if any.
Note: may not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the predicate used to test elements.
an option value containing the first element in the general sequence
that satisfies p, or None if none exists.
Folds the elements of this general sequence using the specified associative binary operator.
Folds the elements of this general sequence using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
a type parameter for the binary operator, a supertype of A.
a neutral element for the fold operation; may be added to the result
an arbitrary number of times, and must not change the result (e.g., Nil for list concatenation,
0 for addition, or 1 for multiplication.)
a binary operator that must be associative
the result of applying fold operator op between all the elements and z
Applies a binary operator to a start value and all elements of this general sequence, going left to right.
Applies a binary operator to a start value and all elements of this general sequence, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this general sequence,
going left to right with the start value z on the left:
op(...op(z, x_1), x_2, ..., x_n)
where x1, ..., xn are the elements of this general sequence.
Applies a binary operator to all elements of this general sequence and a start value, going right to left.
Applies a binary operator to all elements of this general sequence and a start value, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this general sequence,
going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this general sequence.
Partitions this general sequence into a map of general sequences according to some discriminator function.
Partitions this general sequence into a map of general sequences according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new general sequence.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to general sequences such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k) That is, every key k is bound to a general sequence of those elements x
for which f(x) equals k.
Selects the first element of this general sequence.
Selects the first element of this general sequence.
the first element of this general sequence.
if the general sequence is empty.
Optionally selects the first element.
Optionally selects the first element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this general sequence if it is nonempty,
None if it is empty.
Finds index of the first element satisfying some predicate after or at some start index.
Finds index of the first element satisfying some predicate after or at some start index.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the start index
the index >= from of the first element of this general sequence that satisfies the predicate p,
or -1, if none exists.
Selects all elements except the last.
Selects all elements except the last.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a general sequence consisting of all elements of this general sequence except the last one.
if the general sequence is empty.
Tests whether this general sequence can be repeatedly traversed.
Tests whether this general sequence can be repeatedly traversed.
true
Selects the last element.
Selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The last element of this general sequence.
If the general sequence is empty.
Finds index of last element satisfying some predicate before or at given end index.
Finds index of last element satisfying some predicate before or at given end index.
the predicate used to test elements.
the index <= end of the last element of this general sequence that satisfies the predicate p,
or -1, if none exists.
Optionally selects the last element.
Optionally selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the last element of this general sequence$ if it is nonempty,
None if it is empty.
Displays all elements of this general sequence in a string.
Displays all elements of this general sequence in a string.
a string representation of this general sequence. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this general sequence follow each other without any
separator string.
Displays all elements of this general sequence in a string using a separator string.
Displays all elements of this general sequence in a string using a separator string.
the separator string.
a string representation of this general sequence. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this general sequence are separated by the string sep.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this general sequence in a string using start, end, and separator strings.
Displays all elements of this general sequence in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this general sequence. The resulting string
begins with the string start and ends with the string
end. Inside, the string representations (w.r.t. the method
toString) of all elements of this general sequence are separated by
the string sep.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Tests whether the general sequence is not empty.
Tests whether the general sequence is not empty.
true if the general sequence contains at least one element, false otherwise.
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this general sequence in two general sequences according to a predicate.
Partitions this general sequence in two general sequences according to a predicate.
the predicate on which to partition.
a pair of general sequences: the first general sequence consists of all elements that
satisfy the predicate p and the second general sequence consists of all elements
that don't. The relative order of the elements in the resulting general sequences
may not be preserved.
Reduces the elements of this general sequence using the specified associative binary operator.
Reduces the elements of this general sequence using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
The result of applying reduce operator op between all the elements if the general sequence is nonempty.
if this general sequence is empty.
Optionally applies a binary operator to all elements of this general sequence, going left to right.
Optionally applies a binary operator to all elements of this general sequence, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op) is this general sequence is nonempty,
None otherwise.
Reduces the elements of this general sequence, if any, using the specified associative binary operator.
Reduces the elements of this general sequence, if any, using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
An option value containing result of applying reduce operator op between all
the elements if the collection is nonempty, and None otherwise.
Applies a binary operator to all elements of this general sequence, going right to left.
Applies a binary operator to all elements of this general sequence, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this general sequence,
going right to left:
op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...)) where x1, ..., xn are the elements of this general sequence.
if this general sequence is empty.
Optionally applies a binary operator to all elements of this general sequence, going right to left.
Optionally applies a binary operator to all elements of this general sequence, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op) is this general sequence is nonempty,
None otherwise.
Returns new general sequence wih elements in reversed order.
Returns new general sequence wih elements in reversed order.
Note: will not terminate for infinite-sized collections.
A new general sequence with all elements of this general sequence in reversed order.
Computes a prefix scan of the elements of the collection.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z may be applied more than once.
element type of the resulting collection
type of the resulting collection
neutral element for the operator op
the associative operator for the scan
combiner factory which provides a combiner
a new general sequence containing the prefix scan of the elements in this general sequence
Produces a collection containing cumulative results of applying the operator going left to right.
Produces a collection containing cumulative results of applying the operator going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
collection with intermediate results
Produces a collection containing cumulative results of applying the operator going right to left.
Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
collection with intermediate results
(Changed in version 2.9.0) The behavior of scanRight has changed. The previous behavior can be reproduced with scanRight.reverse.
Computes length of longest segment whose elements all satisfy some predicate.
Computes length of longest segment whose elements all satisfy some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the index where the search starts.
the length of the longest segment of this general sequence starting from index from
such that every element of the segment satisfies the predicate p.
The size of this general sequence.
The size of this general sequence.
Note: will not terminate for infinite-sized collections.
the number of elements in this general sequence.
Selects an interval of elements.
Selects an interval of elements. The returned collection is made up
of all elements x which satisfy the invariant:
from <= indexOf(x) < until
Note: might return different results for different runs, unless the underlying collection type is ordered.
the lowest index to include from this general sequence.
the lowest index to EXCLUDE from this general sequence.
a general sequence containing the elements greater than or equal to
index from extending up to (but not including) index until
of this general sequence.
Splits this general sequence into a prefix/suffix pair according to a predicate.
Splits this general sequence into a prefix/suffix pair according to a predicate.
Note: c span p is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p), provided the evaluation of the
predicate p does not cause any side-effects.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the test predicate
a pair consisting of the longest prefix of this general sequence whose
elements all satisfy p, and the rest of this general sequence.
Splits this general sequence into two at a given position.
Splits this general sequence into two at a given position.
Note: c splitAt n is equivalent to (but possibly more efficient than)
(c take n, c drop n).
Note: might return different results for different runs, unless the underlying collection type is ordered.
the position at which to split.
a pair of general sequences consisting of the first n
elements of this general sequence, and the other elements.
Tests whether this general sequence contains the given sequence at a given index.
Tests whether this general sequence contains the given sequence at a given index.
Note: If the both the receiver object this and the argument
that are infinite sequences this method may not terminate.
the sequence to test
the index where the sequence is searched.
true if the sequence that is contained in this general sequence at
index offset, otherwise false.
Selects all elements except the first.
Selects all elements except the first.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a general sequence consisting of all elements of this general sequence except the first one.
if the general sequence is empty.
Selects first n elements.
Selects first n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to take from this general sequence.
a general sequence consisting only of the first n elements of this general sequence,
or else the whole general sequence, if it has less than n elements.
Takes longest prefix of elements that satisfy a predicate.
Takes longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The predicate used to test elements.
the longest prefix of this general sequence whose elements all satisfy
the predicate p.
Converts this general sequence to a mutable buffer.
Converts this general sequence to a mutable buffer.
Note: will not terminate for infinite-sized collections.
a buffer containing all elements of this general sequence.
Converts this general sequence to an indexed sequence.
Converts this general sequence to an indexed sequence.
Note: will not terminate for infinite-sized collections.
an indexed sequence containing all elements of this general sequence.
Converts this general sequence to an iterable collection.
Converts this general sequence to an iterable collection. Note that
the choice of target Iterable is lazy in this default implementation
as this TraversableOnce may be lazy and unevaluated (i.e. it may
be an iterator which is only traversable once).
Note: will not terminate for infinite-sized collections.
an Iterable containing all elements of this general sequence.
Returns an Iterator over the elements in this general sequence.
Returns an Iterator over the elements in this general sequence. Will return the same Iterator if this instance is already an Iterator.
Note: will not terminate for infinite-sized collections.
an Iterator containing all elements of this general sequence.
Converts this general sequence to a list.
Converts this general sequence to a list.
Note: will not terminate for infinite-sized collections.
a list containing all elements of this general sequence.
Converts this general sequence to a sequence.
Converts this general sequence to a sequence. As with toIterable, it's lazy
in this default implementation, as this TraversableOnce may be
lazy and unevaluated.
Note: will not terminate for infinite-sized collections.
a sequence containing all elements of this general sequence.
Converts this general sequence to a set.
Converts this general sequence to a set.
Note: will not terminate for infinite-sized collections.
a set containing all elements of this general sequence.
Converts this general sequence to a stream.
Converts this general sequence to a stream.
Note: will not terminate for infinite-sized collections.
a stream containing all elements of this general sequence.
Converts this general sequence to an unspecified Traversable.
Converts this general sequence to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
Note: will not terminate for infinite-sized collections.
a Traversable containing all elements of this general sequence.
Converts this general sequence to a Vector.
Converts this general sequence to a Vector.
Note: will not terminate for infinite-sized collections.
a vector containing all elements of this general sequence.
Test two objects for inequality.
Test two objects for inequality.
true if !(this == that), false otherwise.
Equivalent to x.hashCode except for boxed numeric types and null.
Equivalent to x.hashCode except for boxed numeric types and null.
For numerics, it returns a hash value which is consistent
with value equality: if two value type instances compare
as true, then ## will produce the same hash value for each
of them.
For null returns a hashcode where null.hashCode throws a
NullPointerException.
a hash value consistent with ==
[use case] Returns a new general sequence containing the elements from the left hand operand followed by the elements from the right hand operand.
Returns a new general sequence containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the general sequence is the most specific superclass encompassing the element types of the two operands.
Example:
scala> val a = LinkedList(1) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val b = LinkedList(2) b: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val c = a ++ b c: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2) scala> val d = LinkedList('a') d: scala.collection.mutable.LinkedList[Char] = LinkedList(a) scala> val e = c ++ d e: scala.collection.mutable.LinkedList[AnyVal] = LinkedList(1, 2, a)
the element type of the returned collection.
the traversable to append.
a new general sequence which contains all elements of this general sequence
followed by all elements of that.
[use case] A copy of the general sequence with an element prepended.
A copy of the general sequence with an element prepended.
Note that :-ending operators are right associative (see example).
A mnemonic for +: vs. :+ is: the COLon goes on the COLlection side.
Also, the original general sequence is not modified, so you will want to capture the result.
Example:
scala> val x = LinkedList(1) x: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val y = 2 +: x y: scala.collection.mutable.LinkedList[Int] = LinkedList(2, 1) scala> println(x) LinkedList(1)
the prepended element
a new general sequence consisting of elem followed
by all elements of this general sequence.
[use case] A copy of this general sequence with an element appended.
A copy of this general sequence with an element appended.
A mnemonic for +: vs. :+ is: the COLon goes on the COLlection side.
Note: will not terminate for infinite-sized collections.
Example:
scala> import scala.collection.mutable.LinkedList import scala.collection.mutable.LinkedList scala> val a = LinkedList(1) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val b = a :+ 2 b: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2) scala> println(a) LinkedList(1)
the appended element
a new general sequence consisting of
all elements of this general sequence followed by elem.
Test two objects for equality.
Test two objects for equality.
The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).
true if the receiver object is equivalent to the argument; false otherwise.
Selects an element by its index in the general sequence.
Selects an element by its index in the general sequence.
Example:
scala> val x = LinkedList(1, 2, 3, 4, 5) x: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4, 5) scala> x(3) res1: Int = 4
The index to select.
the element of this general sequence at index idx, where 0 indicates the first element.
if idx does not satisfy 0 <= idx < length.
Cast the receiver object to be of type T0.
Cast the receiver object to be of type T0.
Note that the success of a cast at runtime is modulo Scala's erasure semantics.
Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at
runtime, while the expression List(1).asInstanceOf[List[String]] will not.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the requested type.
the receiver object.
if the receiver object is not an instance of the erasure of type T0.
Create a copy of the receiver object.
[use case] Builds a new collection by applying a partial function to all elements of this general sequence on which the function is defined.
Builds a new collection by applying a partial function to all elements of this general sequence on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the general sequence.
a new general sequence resulting from applying the given partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
The factory companion object that builds instances of class GenSeq.
The factory companion object that builds instances of class GenSeq.
(or its Iterable superclass where class GenSeq is not a Seq.)
[use case] Copies values of this general sequence to an array.
Copies values of this general sequence to an array.
Fills the given array xs with values of this general sequence, beginning at index start.
Copying will stop once either the end of the current general sequence is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the array to fill.
the starting index.
[use case] Copies values of this general sequence to an array.
Copies values of this general sequence to an array.
Fills the given array xs with values of this general sequence.
Copying will stop once either the end of the current general sequence is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the array to fill.
[use case] Computes the multiset difference between this general sequence and another sequence.
Computes the multiset difference between this general sequence and another sequence.
Note: will not terminate for infinite-sized collections.
the sequence of elements to remove
a new general sequence which contains all elements of this general sequence
except some of occurrences of elements that also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will not form
part of the result, but any following occurrences will.
Tests whether the argument (arg0) is a reference to the receiver object (this).
Tests whether the argument (arg0) is a reference to the receiver object (this).
The eq method implements an equivalence relation on
non-null instances of AnyRef, and has three additional properties:
x and y of type AnyRef, multiple invocations of
x.eq(y) consistently returns true or consistently returns false.x of type AnyRef, x.eq(null) and null.eq(x) returns false.null.eq(null) returns true. When overriding the equals or hashCode methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they
should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).
true if the argument is a reference to the receiver object; false otherwise.
The equals method for arbitrary sequences.
The equals method for arbitrary sequences. Compares this sequence to some other object.
The object to compare the sequence to
true if that is a sequence that has the same elements as
this sequence in the same order, false otherwise
Called by the garbage collector on the receiver object when there are no more references to the object.
Called by the garbage collector on the receiver object when there are no more references to the object.
The details of when and if the finalize method is invoked, as
well as the interaction between finalize and non-local returns
and exceptions, are all platform dependent.
[use case] Builds a new collection by applying a function to all elements of this general sequence and using the elements of the resulting collections.
Builds a new collection by applying a function to all elements of this general sequence and using the elements of the resulting collections.
For example:
def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")
The type of the resulting collection is guided by the static type of general sequence. This might cause unexpected results sometimes. For example:
// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet) // lettersOf will return a Set[Char], not a Seq def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq) // xs will be a an Iterable[Int] val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2) // ys will be a Map[Int, Int] val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
the element type of the returned collection.
the function to apply to each element.
a new general sequence resulting from applying the given collection-valued function
f to each element of this general sequence and concatenating the results.
[use case] Converts this general sequence of traversable collections into a general sequence formed by the elements of these traversable collections.
Converts this general sequence of traversable collections into a general sequence formed by the elements of these traversable collections.
The resulting collection's type will be guided by the static type of general sequence. For example:
val xs = List(Set(1, 2, 3), Set(1, 2, 3)) // xs == List(1, 2, 3, 1, 2, 3) val ys = Set(List(1, 2, 3), List(3, 2, 1)) // ys == Set(1, 2, 3)
the type of the elements of each traversable collection.
a new general sequence resulting from concatenating all element general sequences.
[use case]
the function that is applied for its side-effect to every element.
The result of function f is discarded.
Returns string formatted according to given format string.
Returns string formatted according to given format string.
Format strings are as for String.format
(@see java.lang.String.format).
The generic builder that builds instances of GenSeq at arbitrary element types.
The generic builder that builds instances of GenSeq at arbitrary element types.
A representation that corresponds to the dynamic class of the receiver object.
A representation that corresponds to the dynamic class of the receiver object.
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object.
not specified by SLS as a member of AnyRef
Hashcodes for GenSeq produce a value from the hashcodes of all the elements of the general sequence.
Hashcodes for GenSeq produce a value from the hashcodes of all the elements of the general sequence.
the hash code value for this object.
[use case] Finds index of first occurrence of some value in this general sequence after or at some start index.
Finds index of first occurrence of some value in this general sequence after or at some start index.
Note: may not terminate for infinite-sized collections.
the element value to search for.
the start index
the index >= from of the first element of this general sequence that is equal (as determined by ==)
to elem, or -1, if none exists.
[use case] Finds index of first occurrence of some value in this general sequence.
Finds index of first occurrence of some value in this general sequence.
Note: may not terminate for infinite-sized collections.
the element value to search for.
the index of the first element of this general sequence that is equal (as determined by ==)
to elem, or -1, if none exists.
Finds index of first element satisfying some predicate.
Finds index of first element satisfying some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the index of the first element of this general sequence that satisfies the predicate p,
or -1, if none exists.
[use case] Computes the multiset intersection between this general sequence and another sequence.
Computes the multiset intersection between this general sequence and another sequence.
Note: may not terminate for infinite-sized collections.
the sequence of elements to intersect with.
a new general sequence which contains all elements of this general sequence
which also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will be retained
in the result, but any following occurrences will be omitted.
Tests whether this general sequence contains given index.
Tests whether this general sequence contains given index.
The implementations of methods apply and isDefinedAt turn a Seq[A] into
a PartialFunction[Int, A].
the index to test
true if this general sequence contains an element at position idx, false otherwise.
Tests whether this general sequence is empty.
Tests whether this general sequence is empty.
true if the general sequence contain no elements, false otherwise.
Test whether the dynamic type of the receiver object is T0.
Test whether the dynamic type of the receiver object is T0.
Note that the result of the test is modulo Scala's erasure semantics.
Therefore the expression 1.isInstanceOf[String] will return false, while the
expression List(1).isInstanceOf[List[String]] will return true.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the specified type.
true if the receiver object is an instance of erasure of type T0; false otherwise.
[use case] Finds index of last occurrence of some value in this general sequence before or at a given end index.
Finds index of last occurrence of some value in this general sequence before or at a given end index.
the element value to search for.
the end index.
the index <= end of the last element of this general sequence that is equal (as determined by ==)
to elem, or -1, if none exists.
[use case] Finds index of last occurrence of some value in this general sequence.
Finds index of last occurrence of some value in this general sequence.
Note: will not terminate for infinite-sized collections.
the element value to search for.
the index of the last element of this general sequence that is equal (as determined by ==)
to elem, or -1, if none exists.
Finds index of last element satisfying some predicate.
Finds index of last element satisfying some predicate.
Note: will not terminate for infinite-sized collections.
the predicate used to test elements.
the index of the last element of this general sequence that satisfies the predicate p,
or -1, if none exists.
The length of the general sequence.
The length of the general sequence.
Note: will not terminate for infinite-sized collections.
Note: xs.length and xs.size yield the same result.
the number of elements in this general sequence.
[use case] Builds a new collection by applying a function to all elements of this general sequence.
Builds a new collection by applying a function to all elements of this general sequence.
the element type of the returned collection.
the function to apply to each element.
a new general sequence resulting from applying the given function
f to each element of this general sequence and collecting the results.
[use case] Finds the largest element.
Finds the largest element.
the largest element of this general sequence.
[use case] Finds the smallest element.
Finds the smallest element.
the smallest element of this general sequence
Equivalent to !(this eq that).
Equivalent to !(this eq that).
true if the argument is not a reference to the receiver object; false otherwise.
The builder that builds instances of type GenSeq[A]
The builder that builds instances of type GenSeq[A]
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up a single thread that is waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Wakes up all threads that are waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
[use case] A copy of this general sequence with an element value appended until a given target length is reached.
A copy of this general sequence with an element value appended until a given target length is reached.
the target length
the padding value
a new general sequence consisting of
all elements of this general sequence followed by the minimal number of occurrences of elem so
that the resulting general sequence has a length of at least len.
Returns a parallel implementation of this collection.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying
all the elements. For these collection, par takes linear time. Mutable collections
in this category do not produce a mutable parallel collection that has the same
underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray or mutable.ParHashMap) override this default
behaviour by creating a parallel collection which shares the same underlying dataset.
For these collections, par takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
[use case] Produces a new general sequence where a slice of elements in this general sequence is replaced by another sequence.
Produces a new general sequence where a slice of elements in this general sequence is replaced by another sequence.
the index of the first replaced element
the number of elements to drop in the original general sequence
a new general sequence consisting of all elements of this general sequence
except that replaced elements starting from from are replaced
by patch.
Returns the length of the longest prefix whose elements all satisfy some predicate.
Returns the length of the longest prefix whose elements all satisfy some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the length of the longest prefix of this general sequence
such that every element of the segment satisfies the predicate p.
[use case] Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the product of all elements in this general sequence of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the general sequence and as result type of product.
Examples of such types are: Long, Float, Double, BigInt.
[use case] Builds a new collection by applying a function to all elements of this general sequence and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this general sequence and collecting the results in reversed order.
Note: will not terminate for infinite-sized collections.
Note: xs.reverseMap(f) is the same as xs.reverse.map(f) but might be more efficient.
the element type of the returned collection.
the function to apply to each element.
a new general sequence resulting from applying the given function
f to each element of this general sequence and collecting the results in reversed order.
[use case] Checks if the other iterable collection contains the same elements in the same order as this general sequence.
Checks if the other iterable collection contains the same elements in the same order as this general sequence.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Note: will not terminate for infinite-sized collections.
the collection to compare with.
true, if both collections contain the same elements in the same order, false otherwise.
Tests whether this general sequence starts with the given sequence.
Tests whether this general sequence starts with the given sequence.
the sequence to test
true if this collection has that as a prefix, false otherwise.
Defines the prefix of this object's toString representation.
Defines the prefix of this object's toString representation.
a string representation which starts the result of toString
applied to this general sequence. By default the string prefix is the
simple name of the collection class general sequence.
[use case] Sums up the elements of this collection.
Sums up the elements of this collection.
the sum of all elements in this general sequence of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the general sequence and as result type of sum.
Examples of such types are: Long, Float, Double, BigInt.
[use case] Converts this general sequence into another by copying all elements.
Converts this general sequence into another by copying all elements.
Note: will not terminate for infinite-sized collections.
The collection type to build.
a new collection containing all elements of this general sequence.
[use case] Converts this general sequence to an array.
Converts this general sequence to an array.
Note: will not terminate for infinite-sized collections.
an array containing all elements of this general sequence.
An ClassTag must be available for the element type of this general sequence.
[use case] Converts this general sequence to a map.
Converts this general sequence to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
Note: will not terminate for infinite-sized collections.
a map of type immutable.Map[T, U]
containing all key/value pairs of type (T, U) of this general sequence.
Creates a String representation of this object.
Creates a String representation of this object. The default representation is platform dependent. On the java platform it is the concatenation of the class name, "@", and the object's hashcode in hexadecimal.
a String representation of the object.
Transposes this general sequence of traversable collections into a general sequence of general sequences.
Transposes this general sequence of traversable collections into a general sequence of general sequences.
the type of the elements of each traversable collection.
an implicit conversion which asserts that the
element type of this general sequence is a Traversable.
a two-dimensional general sequence of general sequences which has as nth row the nth column of this general sequence.
(Changed in version 2.9.0) transpose throws an IllegalArgumentException if collections are not uniformly sized.
if all collections in this general sequence are not of the same size.
[use case] Produces a new sequence which contains all elements of this general sequence and also all elements of a given sequence.
Produces a new sequence which contains all elements of this general sequence and also all elements of
a given sequence. xs union ys is equivalent to xs ++ ys.
Another way to express this
is that xs union ys computes the order-presevring multi-set union of xs and ys.
union is hence a counter-part of diff and intersect which also work on multi-sets.
Note: will not terminate for infinite-sized collections.
the sequence to add.
a new general sequence which contains all elements of this general sequence
followed by all elements of that.
Converts this general sequence of pairs into two collections of the first and second half of each pair.
Converts this general sequence of pairs into two collections of the first and second half of each pair.
the type of the first half of the element pairs
the type of the second half of the element pairs
an implicit conversion which asserts that the element type of this general sequence is a pair.
a pair general sequences, containing the first, respectively second half of each element pair of this general sequence.
Converts this general sequence of triples into three collections of the first, second, and third element of each triple.
Converts this general sequence of triples into three collections of the first, second, and third element of each triple.
the type of the first member of the element triples
the type of the second member of the element triples
the type of the third member of the element triples
an implicit conversion which asserts that the element type of this general sequence is a triple.
a triple general sequences, containing the first, second, respectively third member of each element triple of this general sequence.
[use case] A copy of this general sequence with one single replaced element.
A copy of this general sequence with one single replaced element.
the position of the replacement
the replacing element
a copy of this general sequence with the element at position index replaced by elem.
[use case] Returns a general sequence formed from this general sequence and another iterable collection by combining corresponding elements in pairs.
Returns a general sequence formed from this general sequence and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new general sequence containing pairs consisting of
corresponding elements of this general sequence and that. The length
of the returned collection is the minimum of the lengths of this general sequence and that.
[use case] Returns a general sequence formed from this general sequence and another iterable collection by combining corresponding elements in pairs.
Returns a general sequence formed from this general sequence and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this general sequence is shorter than that.
the element to be used to fill up the result if that is shorter than this general sequence.
a new general sequence containing pairs consisting of
corresponding elements of this general sequence and that. The length
of the returned collection is the maximum of the lengths of this general sequence and that.
If this general sequence is shorter than that, thisElem values are used to pad the result.
If that is shorter than this general sequence, thatElem values are used to pad the result.
[use case] Zips this general sequence with its indices.
Zips this general sequence with its indices.
Note: might return different results for different runs, unless the underlying collection type is ordered.
A new general sequence containing pairs consisting of all elements of this
general sequence paired with their index. Indices start at 0.
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
(zipped: StringAdd).self
(zipped: StringFormat).self
A syntactic sugar for out of order folding.
A syntactic sugar for out of order folding. See fold.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a /:\ 5)(_+_) b: Int = 15
(Since version 2.10.0) use fold instead
(zipped: ArrowAssoc[Zipped[B]]).x
(Since version 2.10.0) Use leftOfArrow instead
(zipped: Ensuring[Zipped[B]]).x
(Since version 2.10.0) Use resultOfEnsuring instead