GenSetLike

trait GenSetLike[A, +Repr] extends GenIterableLike[A, Repr] with (A) ⇒ Boolean with Equals with Parallelizable[A, ParSet[A]]

A template trait for sets which may possibly have their operations implemented in parallel.

Source
GenSetLike.scala
Linear Supertypes
Known Subclasses
Ordering
1. Alphabetic
2. By inheritance
Inherited
1. GenSetLike
2. Equals
3. Function1
4. GenIterableLike
5. GenTraversableLike
6. Parallelizable
7. GenTraversableOnce
8. AnyRef
9. Any
Implicitly
1. by traversable2ops
3. by any2stringfmt
4. by any2ArrowAssoc
5. by any2Ensuring
1. Hide All
2. Show all
Visibility
1. Public
2. All

Abstract Value Members

3. abstract def /:[B](z: B)(op: (B, A) ⇒ B): B

Applies a binary operator to a start value and all elements of this general set, going left to right.

Applies a binary operator to a start value and all elements of this general set, going left to right.

Note: `/:` is alternate syntax for `foldLeft`; `z /: xs` is the same as `xs foldLeft z`.

Examples:

Note that the folding function used to compute b is equivalent to that used to compute c.

```scala> val a = LinkedList(1,2,3,4)

scala> val b = (5 /: a)(_+_)
b: Int = 15

scala> val c = (5 /: a)((x,y) => x + y)
c: Int = 15```

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

B

the result type of the binary operator.

z

the start value.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this general set, going left to right with the start value `z` on the left:

`op(...op(op(z, x_1), x_2), ..., x_n)`

where `x1, ..., xn` are the elements of this general set.

Definition Classes
GenTraversableOnce
4. abstract def :\[B](z: B)(op: (A, B) ⇒ B): B

Applies a binary operator to all elements of this general set and a start value, going right to left.

Applies a binary operator to all elements of this general set and a start value, going right to left.

Note: `:\` is alternate syntax for `foldRight`; `xs :\ z` is the same as `xs foldRight z`.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

Examples:

Note that the folding function used to compute b is equivalent to that used to compute c.

```scala> val a = LinkedList(1,2,3,4)

scala> val b = (a :\ 5)(_+_)
b: Int = 15

scala> val c = (a :\ 5)((x,y) => x + y)
c: Int = 15```
B

the result type of the binary operator.

z

the start value

op

the binary operator

returns

the result of inserting `op` between consecutive elements of this general set, going right to left with the start value `z` on the right:

`op(x_1, op(x_2, ... op(x_n, z)...))`

where `x1, ..., xn` are the elements of this general set.

Definition Classes
GenTraversableOnce
5. abstract def aggregate[B](z: B)(seqop: (B, A) ⇒ B, combop: (B, B) ⇒ B): B

Aggregates the results of applying an operator to subsequent elements.

Aggregates the results of applying an operator to subsequent elements.

This is a more general form of `fold` and `reduce`. It has similar semantics, but does not require the result to be a supertype of the element type. It traverses the elements in different partitions sequentially, using `seqop` to update the result, and then applies `combop` to results from different partitions. The implementation of this operation may operate on an arbitrary number of collection partitions, so `combop` may be invoked an arbitrary number of times.

For example, one might want to process some elements and then produce a `Set`. In this case, `seqop` would process an element and append it to the list, while `combop` would concatenate two lists from different partitions together. The initial value `z` would be an empty set.

`pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)`

Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).

B

the type of accumulated results

z

the initial value for the accumulated result of the partition - this will typically be the neutral element for the `seqop` operator (e.g. `Nil` for list concatenation or `0` for summation)

seqop

an operator used to accumulate results within a partition

combop

an associative operator used to combine results from different partitions

Definition Classes
GenTraversableOnce
6. abstract def canEqual(that: Any): Boolean

A method that should be called from every well-designed equals method that is open to be overridden in a subclass.

A method that should be called from every well-designed equals method that is open to be overridden in a subclass. See Programming in Scala, Chapter 28 for discussion and design.

that

the value being probed for possible equality

returns

true if this instance can possibly equal `that`, otherwise false

Definition Classes
Equals

8. abstract def copyToArray[B >: A](xs: Array[B], start: Int, len: Int): Unit

Definition Classes
GenTraversableOnce
9. abstract def count(p: (A) ⇒ Boolean): Int

Counts the number of elements in the general set which satisfy a predicate.

Counts the number of elements in the general set which satisfy a predicate.

p

the predicate used to test elements.

returns

the number of elements satisfying the predicate `p`.

Definition Classes
GenTraversableOnce
10. abstract def diff(that: GenSet[A]): Repr

Computes the difference of this set and another set.

Computes the difference of this set and another set.

that

the set of elements to exclude.

returns

a set containing those elements of this set that are not also contained in the given set `that`.

11. abstract def drop(n: Int): Repr

Selects all elements except first n ones.

Selects all elements except first n ones.

Note: might return different results for different runs, unless the underlying collection type is ordered.

n

the number of elements to drop from this general set.

returns

a general set consisting of all elements of this general set except the first `n` ones, or else the empty general set, if this general set has less than `n` elements.

Definition Classes
GenTraversableLike
12. abstract def dropWhile(pred: (A) ⇒ Boolean): Repr

Drops longest prefix of elements that satisfy a predicate.

Drops longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

pred

The predicate used to test elements.

returns

the longest suffix of this general set whose first element does not satisfy the predicate `p`.

Definition Classes
GenTraversableLike
13. abstract def exists(pred: (A) ⇒ Boolean): Boolean

Definition Classes
GenTraversableOnce
14. abstract def filter(pred: (A) ⇒ Boolean): Repr

Selects all elements of this general set which satisfy a predicate.

Selects all elements of this general set which satisfy a predicate.

pred

the predicate used to test elements.

returns

a new general set consisting of all elements of this general set that satisfy the given predicate `p`. Their order may not be preserved.

Definition Classes
GenTraversableLike
15. abstract def filterNot(pred: (A) ⇒ Boolean): Repr

Selects all elements of this general set which do not satisfy a predicate.

Selects all elements of this general set which do not satisfy a predicate.

pred

the predicate used to test elements.

returns

a new general set consisting of all elements of this general set that do not satisfy the given predicate `p`. Their order may not be preserved.

Definition Classes
GenTraversableLike
16. abstract def find(pred: (A) ⇒ Boolean): Option[A]

Finds the first element of the general set satisfying a predicate, if any.

Finds the first element of the general set satisfying a predicate, if any.

Note: may not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

pred

the predicate used to test elements.

returns

an option value containing the first element in the general set that satisfies `p`, or `None` if none exists.

Definition Classes
GenTraversableOnce
17. abstract def fold[A1 >: A](z: A1)(op: (A1, A1) ⇒ A1): A1

Folds the elements of this general set using the specified associative binary operator.

Folds the elements of this general set using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

A1

a type parameter for the binary operator, a supertype of `A`.

z

a neutral element for the fold operation; may be added to the result an arbitrary number of times, and must not change the result (e.g., `Nil` for list concatenation, 0 for addition, or 1 for multiplication.)

op

a binary operator that must be associative

returns

the result of applying fold operator `op` between all the elements and `z`

Definition Classes
GenTraversableOnce
18. abstract def foldLeft[B](z: B)(op: (B, A) ⇒ B): B

Applies a binary operator to a start value and all elements of this general set, going left to right.

Applies a binary operator to a start value and all elements of this general set, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

B

the result type of the binary operator.

z

the start value.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this general set, going left to right with the start value `z` on the left:

`op(...op(z, x_1), x_2, ..., x_n)`

where `x1, ..., xn` are the elements of this general set.

Definition Classes
GenTraversableOnce
19. abstract def foldRight[B](z: B)(op: (A, B) ⇒ B): B

Applies a binary operator to all elements of this general set and a start value, going right to left.

Applies a binary operator to all elements of this general set and a start value, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

B

the result type of the binary operator.

z

the start value.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this general set, going right to left with the start value `z` on the right:

`op(x_1, op(x_2, ... op(x_n, z)...))`

where `x1, ..., xn` are the elements of this general set.

Definition Classes
GenTraversableOnce
20. abstract def forall(pred: (A) ⇒ Boolean): Boolean

Definition Classes
GenTraversableOnce
21. abstract def groupBy[K](f: (A) ⇒ K): GenMap[K, Repr]

Partitions this general set into a map of general sets according to some discriminator function.

Partitions this general set into a map of general sets according to some discriminator function.

Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new general set.

K

the type of keys returned by the discriminator function.

f

the discriminator function.

returns

A map from keys to general sets such that the following invariant holds:

`(xs partition f)(k) = xs filter (x => f(x) == k)`

That is, every key `k` is bound to a general set of those elements `x` for which `f(x)` equals `k`.

Definition Classes
GenTraversableLike
22. abstract def hasDefiniteSize: Boolean

Definition Classes
GenTraversableOnce

Selects the first element of this general set.

Selects the first element of this general set.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

the first element of this general set.

Definition Classes
GenTraversableLike
Exceptions thrown
`NoSuchElementException`

if the general set is empty.

Optionally selects the first element.

Optionally selects the first element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

the first element of this general set if it is nonempty, `None` if it is empty.

Definition Classes
GenTraversableLike
25. abstract def init: Repr

Selects all elements except the last.

Selects all elements except the last.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

a general set consisting of all elements of this general set except the last one.

Definition Classes
GenTraversableLike
Exceptions thrown
`UnsupportedOperationException`

if the general set is empty.

26. abstract def isEmpty: Boolean

Tests whether the general set is empty.

Tests whether the general set is empty.

returns

`true` if the general set contains no elements, `false` otherwise.

Definition Classes
GenTraversableOnce
27. abstract def isTraversableAgain: Boolean

Tests whether this general set can be repeatedly traversed.

Tests whether this general set can be repeatedly traversed.

returns

`true`

Definition Classes
GenTraversableLikeGenTraversableOnce
28. abstract def iterator: Iterator[A]

Definition Classes
GenSetLikeGenIterableLike
29. abstract def last: A

Selects the last element.

Selects the last element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

The last element of this general set.

Definition Classes
GenTraversableLike
Exceptions thrown
NoSuchElementException

If the general set is empty.

30. abstract def lastOption: Option[A]

Optionally selects the last element.

Optionally selects the last element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

the last element of this general set\$ if it is nonempty, `None` if it is empty.

Definition Classes
GenTraversableLike
31. abstract def maxBy[B](f: (A) ⇒ B)(implicit cmp: Ordering[B]): A

Definition Classes
GenTraversableOnce
32. abstract def minBy[B](f: (A) ⇒ B)(implicit cmp: Ordering[B]): A

Definition Classes
GenTraversableOnce
33. abstract def mkString: String

Displays all elements of this general set in a string.

Displays all elements of this general set in a string.

returns

a string representation of this general set. In the resulting string the string representations (w.r.t. the method `toString`) of all elements of this general set follow each other without any separator string.

Definition Classes
GenTraversableOnce
34. abstract def mkString(sep: String): String

Displays all elements of this general set in a string using a separator string.

Displays all elements of this general set in a string using a separator string.

sep

the separator string.

returns

a string representation of this general set. In the resulting string the string representations (w.r.t. the method `toString`) of all elements of this general set are separated by the string `sep`.

Definition Classes
GenTraversableOnce
Example:
1. `List(1, 2, 3).mkString("|") = "1|2|3"`

35. abstract def mkString(start: String, sep: String, end: String): String

Displays all elements of this general set in a string using start, end, and separator strings.

Displays all elements of this general set in a string using start, end, and separator strings.

start

the starting string.

sep

the separator string.

end

the ending string.

returns

a string representation of this general set. The resulting string begins with the string `start` and ends with the string `end`. Inside, the string representations (w.r.t. the method `toString`) of all elements of this general set are separated by the string `sep`.

Definition Classes
GenTraversableOnce
Example:
1. `List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"`

36. abstract def nonEmpty: Boolean

Tests whether the general set is not empty.

Tests whether the general set is not empty.

returns

`true` if the general set contains at least one element, `false` otherwise.

Definition Classes
GenTraversableOnce
37. abstract def parCombiner: Combiner[A, ParSet[A]]

The default `par` implementation uses the combiner provided by this method to create a new parallel collection.

The default `par` implementation uses the combiner provided by this method to create a new parallel collection.

returns

a combiner for the parallel collection of type `ParRepr`

Attributes
protected[this]
Definition Classes
Parallelizable
38. abstract def partition(pred: (A) ⇒ Boolean): (Repr, Repr)

Partitions this general set in two general sets according to a predicate.

Partitions this general set in two general sets according to a predicate.

pred

the predicate on which to partition.

returns

a pair of general sets: the first general set consists of all elements that satisfy the predicate `p` and the second general set consists of all elements that don't. The relative order of the elements in the resulting general sets may not be preserved.

Definition Classes
GenTraversableLike
39. abstract def reduce[A1 >: A](op: (A1, A1) ⇒ A1): A1

Reduces the elements of this general set using the specified associative binary operator.

Reduces the elements of this general set using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

A1

A type parameter for the binary operator, a supertype of `A`.

op

A binary operator that must be associative.

returns

The result of applying reduce operator `op` between all the elements if the general set is nonempty.

Definition Classes
GenTraversableOnce
Exceptions thrown
UnsupportedOperationException

if this general set is empty.

40. abstract def reduceLeftOption[B >: A](op: (B, A) ⇒ B): Option[B]

Optionally applies a binary operator to all elements of this general set, going left to right.

Optionally applies a binary operator to all elements of this general set, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

B

the result type of the binary operator.

op

the binary operator.

returns

an option value containing the result of `reduceLeft(op)` is this general set is nonempty, `None` otherwise.

Definition Classes
GenTraversableOnce
41. abstract def reduceOption[A1 >: A](op: (A1, A1) ⇒ A1): Option[A1]

Reduces the elements of this general set, if any, using the specified associative binary operator.

Reduces the elements of this general set, if any, using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

A1

A type parameter for the binary operator, a supertype of `A`.

op

A binary operator that must be associative.

returns

An option value containing result of applying reduce operator `op` between all the elements if the collection is nonempty, and `None` otherwise.

Definition Classes
GenTraversableOnce
42. abstract def reduceRight[B >: A](op: (A, B) ⇒ B): B

Applies a binary operator to all elements of this general set, going right to left.

Applies a binary operator to all elements of this general set, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

B

the result type of the binary operator.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this general set, going right to left:

`op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...))`

where `x1, ..., xn` are the elements of this general set.

Definition Classes
GenTraversableOnce
Exceptions thrown
`UnsupportedOperationException`

if this general set is empty.

43. abstract def reduceRightOption[B >: A](op: (A, B) ⇒ B): Option[B]

Optionally applies a binary operator to all elements of this general set, going right to left.

Optionally applies a binary operator to all elements of this general set, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

B

the result type of the binary operator.

op

the binary operator.

returns

an option value containing the result of `reduceRight(op)` is this general set is nonempty, `None` otherwise.

Definition Classes
GenTraversableOnce
44. abstract def repr: Repr

Definition Classes
GenTraversableLike
45. abstract def scan[B >: A, That](z: B)(op: (B, B) ⇒ B)(implicit cbf: CanBuildFrom[Repr, B, That]): That

Computes a prefix scan of the elements of the collection.

Computes a prefix scan of the elements of the collection.

Note: The neutral element `z` may be applied more than once.

B

element type of the resulting collection

That

type of the resulting collection

z

neutral element for the operator `op`

op

the associative operator for the scan

cbf

combiner factory which provides a combiner

returns

a new general set containing the prefix scan of the elements in this general set

Definition Classes
GenTraversableLike
46. abstract def scanLeft[B, That](z: B)(op: (B, A) ⇒ B)(implicit bf: CanBuildFrom[Repr, B, That]): That

Produces a collection containing cumulative results of applying the operator going left to right.

Produces a collection containing cumulative results of applying the operator going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

B

the type of the elements in the resulting collection

That

the actual type of the resulting collection

z

the initial value

op

the binary operator applied to the intermediate result and the element

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and and the new element type `B`.

returns

collection with intermediate results

Definition Classes
GenTraversableLike
47. abstract def scanRight[B, That](z: B)(op: (A, B) ⇒ B)(implicit bf: CanBuildFrom[Repr, B, That]): That

Produces a collection containing cumulative results of applying the operator going right to left.

Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Example:

`List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)`
B

the type of the elements in the resulting collection

That

the actual type of the resulting collection

z

the initial value

op

the binary operator applied to the intermediate result and the element

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and and the new element type `B`.

returns

collection with intermediate results

Definition Classes
GenTraversableLike
Annotations
@migration
Migration

(Changed in version 2.9.0) The behavior of `scanRight` has changed. The previous behavior can be reproduced with scanRight.reverse.

48. abstract def seq: Set[A]

Definition Classes
GenSetLikeParallelizableGenTraversableOnce
49. abstract def size: Int

The size of this general set.

The size of this general set.

Note: will not terminate for infinite-sized collections.

returns

the number of elements in this general set.

Definition Classes
GenTraversableLikeGenTraversableOnce
50. abstract def slice(unc_from: Int, unc_until: Int): Repr

Selects an interval of elements.

Selects an interval of elements. The returned collection is made up of all elements `x` which satisfy the invariant:

`from <= indexOf(x) < until`

Note: might return different results for different runs, unless the underlying collection type is ordered.

unc_from

the lowest index to include from this general set.

unc_until

the lowest index to EXCLUDE from this general set.

returns

a general set containing the elements greater than or equal to index `from` extending up to (but not including) index `until` of this general set.

Definition Classes
GenTraversableLike
51. abstract def span(pred: (A) ⇒ Boolean): (Repr, Repr)

Splits this general set into a prefix/suffix pair according to a predicate.

Splits this general set into a prefix/suffix pair according to a predicate.

Note: `c span p` is equivalent to (but possibly more efficient than) `(c takeWhile p, c dropWhile p)`, provided the evaluation of the predicate `p` does not cause any side-effects.

Note: might return different results for different runs, unless the underlying collection type is ordered.

pred

the test predicate

returns

a pair consisting of the longest prefix of this general set whose elements all satisfy `p`, and the rest of this general set.

Definition Classes
GenTraversableLike
52. abstract def splitAt(n: Int): (Repr, Repr)

Splits this general set into two at a given position.

Splits this general set into two at a given position. Note: `c splitAt n` is equivalent to (but possibly more efficient than) `(c take n, c drop n)`.

Note: might return different results for different runs, unless the underlying collection type is ordered.

n

the position at which to split.

returns

a pair of general sets consisting of the first `n` elements of this general set, and the other elements.

Definition Classes
GenTraversableLike
53. abstract def stringPrefix: String

Defines the prefix of this object's `toString` representation.

Defines the prefix of this object's `toString` representation.

returns

a string representation which starts the result of `toString` applied to this general set. By default the string prefix is the simple name of the collection class general set.

Definition Classes
GenTraversableLike
54. abstract def tail: Repr

Selects all elements except the first.

Selects all elements except the first.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

a general set consisting of all elements of this general set except the first one.

Definition Classes
GenTraversableLike
Exceptions thrown
`UnsupportedOperationException`

if the general set is empty.

55. abstract def take(n: Int): Repr

Selects first n elements.

Selects first n elements.

Note: might return different results for different runs, unless the underlying collection type is ordered.

n

the number of elements to take from this general set.

returns

a general set consisting only of the first `n` elements of this general set, or else the whole general set, if it has less than `n` elements.

Definition Classes
GenTraversableLike
56. abstract def takeWhile(pred: (A) ⇒ Boolean): Repr

Takes longest prefix of elements that satisfy a predicate.

Takes longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

pred

The predicate used to test elements.

returns

the longest prefix of this general set whose elements all satisfy the predicate `p`.

Definition Classes
GenTraversableLike
57. abstract def toBuffer[A1 >: A]: Buffer[A1]

Converts this general set to a mutable buffer.

Converts this general set to a mutable buffer.

Note: will not terminate for infinite-sized collections.

returns

a buffer containing all elements of this general set.

Definition Classes
GenTraversableOnce
58. abstract def toIndexedSeq: immutable.IndexedSeq[A]

Converts this general set to an indexed sequence.

Converts this general set to an indexed sequence.

Note: will not terminate for infinite-sized collections.

returns

an indexed sequence containing all elements of this general set.

Definition Classes
GenTraversableOnce
59. abstract def toIterable: GenIterable[A]

Converts this general set to an iterable collection.

Converts this general set to an iterable collection. Note that the choice of target `Iterable` is lazy in this default implementation as this `TraversableOnce` may be lazy and unevaluated (i.e. it may be an iterator which is only traversable once).

Note: will not terminate for infinite-sized collections.

returns

an `Iterable` containing all elements of this general set.

Definition Classes
GenTraversableOnce
60. abstract def toIterator: Iterator[A]

Returns an Iterator over the elements in this general set.

Returns an Iterator over the elements in this general set. Will return the same Iterator if this instance is already an Iterator.

Note: will not terminate for infinite-sized collections.

returns

an Iterator containing all elements of this general set.

Definition Classes
GenTraversableOnce
61. abstract def toList: List[A]

Converts this general set to a list.

Converts this general set to a list.

Note: will not terminate for infinite-sized collections.

returns

a list containing all elements of this general set.

Definition Classes
GenTraversableOnce
62. abstract def toSeq: GenSeq[A]

Converts this general set to a sequence.

Converts this general set to a sequence. As with `toIterable`, it's lazy in this default implementation, as this `TraversableOnce` may be lazy and unevaluated.

Note: will not terminate for infinite-sized collections.

returns

a sequence containing all elements of this general set.

Definition Classes
GenTraversableOnce
63. abstract def toSet[A1 >: A]: GenSet[A1]

Converts this general set to a set.

Converts this general set to a set.

Note: will not terminate for infinite-sized collections.

returns

a set containing all elements of this general set.

Definition Classes
GenTraversableOnce
64. abstract def toStream: Stream[A]

Converts this general set to a stream.

Converts this general set to a stream.

Note: will not terminate for infinite-sized collections.

returns

a stream containing all elements of this general set.

Definition Classes
GenTraversableOnce
65. abstract def toTraversable: GenTraversable[A]

Converts this general set to an unspecified Traversable.

Converts this general set to an unspecified Traversable. Will return the same collection if this instance is already Traversable.

Note: will not terminate for infinite-sized collections.

returns

a Traversable containing all elements of this general set.

Definition Classes
GenTraversableOnce
66. abstract def toVector: Vector[A]

Converts this general set to a Vector.

Converts this general set to a Vector.

Note: will not terminate for infinite-sized collections.

returns

a vector containing all elements of this general set.

Definition Classes
GenTraversableOnce
67. abstract def union(that: GenSet[A]): Repr

Computes the union between of set and another set.

Computes the union between of set and another set.

that

the set to form the union with.

returns

a new set consisting of all elements that are in this set or in the given set `that`.

Concrete Value Members

1. final def !=(arg0: AnyRef): Boolean

Definition Classes
AnyRef
2. final def !=(arg0: Any): Boolean

Test two objects for inequality.

Test two objects for inequality.

returns

`true` if !(this == that), false otherwise.

Definition Classes
Any
3. final def ##(): Int

Equivalent to `x.hashCode` except for boxed numeric types and `null`.

Equivalent to `x.hashCode` except for boxed numeric types and `null`. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For `null` returns a hashcode where `null.hashCode` throws a `NullPointerException`.

returns

a hash value consistent with ==

Definition Classes
AnyRef → Any
4. def &(that: GenSet[A]): Repr

Computes the intersection between this set and another set.

Computes the intersection between this set and another set.

Note: Same as `intersect`.

that

the set to intersect with.

returns

a new set consisting of all elements that are both in this set and in the given set `that`.

5. def &~(that: GenSet[A]): Repr

The difference of this set and another set.

The difference of this set and another set.

Note: Same as `diff`.

that

the set of elements to exclude.

returns

a set containing those elements of this set that are not also contained in the given set `that`.

6. abstract def ++[B](that: GenTraversableOnce[B]): GenSet[B]

[use case] Returns a new general set containing the elements from the left hand operand followed by the elements from the right hand operand.

[use case]

Returns a new general set containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the general set is the most specific superclass encompassing the element types of the two operands.

Example:

```scala> val a = LinkedList(1)

scala> val c = a ++ b

scala> val e = c ++ d
B

the element type of the returned collection.

that

the traversable to append.

returns

a new general set which contains all elements of this general set followed by all elements of `that`.

Definition Classes
GenTraversableLike
Full Signature

7. def ->[B](y: B): (GenSetLike[A, Repr], B)

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to ArrowAssoc[GenSetLike[A, Repr]] performed by method any2ArrowAssoc in scala.Predef.
Definition Classes
ArrowAssoc
Annotations
()
8. final def ==(arg0: AnyRef): Boolean

Definition Classes
AnyRef
9. final def ==(arg0: Any): Boolean

Test two objects for equality.

Test two objects for equality. The expression `x == that` is equivalent to `if (x eq null) that eq null else x.equals(that)`.

returns

`true` if the receiver object is equivalent to the argument; `false` otherwise.

Definition Classes
Any
10. def andThen[A](g: (Boolean) ⇒ A): (A) ⇒ A

Composes two instances of Function1 in a new Function1, with this function applied first.

Composes two instances of Function1 in a new Function1, with this function applied first.

A

the result type of function `g`

g

a function R => A

returns

a new function `f` such that `f(x) == g(apply(x))`

Definition Classes
Function1
Annotations
()
11. def apply(elem: A): Boolean

Tests if some element is contained in this set.

Tests if some element is contained in this set.

This method is equivalent to `contains`. It allows sets to be interpreted as predicates.

elem

the element to test for membership.

returns

`true` if `elem` is contained in this set, `false` otherwise.

Definition Classes
GenSetLikeFunction1
12. final def asInstanceOf[T0]: T0

Cast the receiver object to be of type `T0`.

Cast the receiver object to be of type `T0`.

Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression `1.asInstanceOf[String]` will throw a `ClassCastException` at runtime, while the expression `List(1).asInstanceOf[List[String]]` will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested type.

returns

Definition Classes
Any
Exceptions thrown
ClassCastException

if the receiver object is not an instance of the erasure of type `T0`.

13. def asParIterable: ParIterable[A]

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
Definition Classes
TraversableOps
14. def asParSeq: ParSeq[A]

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
Definition Classes
TraversableOps
15. def clone(): AnyRef

Create a copy of the receiver object.

Create a copy of the receiver object.

The default implementation of the `clone` method is platform dependent.

returns

a copy of the receiver object.

Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
()
Note

not specified by SLS as a member of AnyRef

16. abstract def collect[B](pf: PartialFunction[A, B]): GenSet[B]

[use case] Builds a new collection by applying a partial function to all elements of this general set on which the function is defined.

[use case]

Builds a new collection by applying a partial function to all elements of this general set on which the function is defined.

B

the element type of the returned collection.

pf

the partial function which filters and maps the general set.

returns

a new general set resulting from applying the given partial function `pf` to each element on which it is defined and collecting the results. The order of the elements is preserved.

Definition Classes
GenTraversableLike
Full Signature

17. def compose[A](g: (A) ⇒ A): (A) ⇒ Boolean

Composes two instances of Function1 in a new Function1, with this function applied last.

Composes two instances of Function1 in a new Function1, with this function applied last.

A

the type to which function `g` can be applied

g

a function A => T1

returns

a new function `f` such that `f(x) == apply(g(x))`

Definition Classes
Function1
Annotations
()
18. abstract def copyToArray(xs: Array[A], start: Int): Unit

[use case] Copies values of this general set to an array.

[use case]

Copies values of this general set to an array. Fills the given array `xs` with values of this general set, beginning at index `start`. Copying will stop once either the end of the current general set is reached, or the end of the array is reached.

Note: will not terminate for infinite-sized collections.

xs

the array to fill.

start

the starting index.

Definition Classes
GenTraversableOnce
Full Signature

19. abstract def copyToArray(xs: Array[A]): Unit

[use case] Copies values of this general set to an array.

[use case]

Copies values of this general set to an array. Fills the given array `xs` with values of this general set. Copying will stop once either the end of the current general set is reached, or the end of the array is reached.

Note: will not terminate for infinite-sized collections.

xs

the array to fill.

Definition Classes
GenTraversableOnce
Full Signature

20. def ensuring(cond: (GenSetLike[A, Repr]) ⇒ Boolean, msg: ⇒ Any): GenSetLike[A, Repr]

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to Ensuring[GenSetLike[A, Repr]] performed by method any2Ensuring in scala.Predef.
Definition Classes
Ensuring
21. def ensuring(cond: (GenSetLike[A, Repr]) ⇒ Boolean): GenSetLike[A, Repr]

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to Ensuring[GenSetLike[A, Repr]] performed by method any2Ensuring in scala.Predef.
Definition Classes
Ensuring
22. def ensuring(cond: Boolean, msg: ⇒ Any): GenSetLike[A, Repr]

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to Ensuring[GenSetLike[A, Repr]] performed by method any2Ensuring in scala.Predef.
Definition Classes
Ensuring
23. def ensuring(cond: Boolean): GenSetLike[A, Repr]

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to Ensuring[GenSetLike[A, Repr]] performed by method any2Ensuring in scala.Predef.
Definition Classes
Ensuring
24. final def eq(arg0: AnyRef): Boolean

Tests whether the argument (`arg0`) is a reference to the receiver object (`this`).

Tests whether the argument (`arg0`) is a reference to the receiver object (`this`).

The `eq` method implements an equivalence relation on non-null instances of `AnyRef`, and has three additional properties:

• It is consistent: for any non-null instances `x` and `y` of type `AnyRef`, multiple invocations of `x.eq(y)` consistently returns `true` or consistently returns `false`.
• For any non-null instance `x` of type `AnyRef`, `x.eq(null)` and `null.eq(x)` returns `false`.
• `null.eq(null)` returns `true`.

When overriding the `equals` or `hashCode` methods, it is important to ensure that their behavior is consistent with reference equality. Therefore, if two objects are references to each other (`o1 eq o2`), they should be equal to each other (`o1 == o2`) and they should hash to the same value (`o1.hashCode == o2.hashCode`).

returns

`true` if the argument is a reference to the receiver object; `false` otherwise.

Definition Classes
AnyRef
25. def equals(that: Any): Boolean

Compares this set with another object for equality.

Compares this set with another object for equality.

Note: This operation contains an unchecked cast: if `that` is a set, it will assume with an unchecked cast that it has the same element type as this set. Any subsequent ClassCastException is treated as a `false` result.

that

the other object

returns

`true` if `that` is a set which contains the same elements as this set.

Definition Classes
GenSetLikeEquals → AnyRef → Any
26. def finalize(): Unit

Called by the garbage collector on the receiver object when there are no more references to the object.

Called by the garbage collector on the receiver object when there are no more references to the object.

The details of when and if the `finalize` method is invoked, as well as the interaction between `finalize` and non-local returns and exceptions, are all platform dependent.

Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
()
Note

not specified by SLS as a member of AnyRef

27. abstract def flatMap[B](f: (A) ⇒ GenTraversableOnce[B]): GenSet[B]

[use case] Builds a new collection by applying a function to all elements of this general set and using the elements of the resulting collections.

[use case]

Builds a new collection by applying a function to all elements of this general set and using the elements of the resulting collections.

For example:

`def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")`

The type of the resulting collection is guided by the static type of general set. This might cause unexpected results sometimes. For example:

```// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set
def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet)

// lettersOf will return a Set[Char], not a Seq
def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq)

// xs will be a an Iterable[Int]
val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2)

// ys will be a Map[Int, Int]
val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)```
B

the element type of the returned collection.

f

the function to apply to each element.

returns

a new general set resulting from applying the given collection-valued function `f` to each element of this general set and concatenating the results.

Definition Classes
GenTraversableLike
Full Signature

28. abstract def foreach(f: (A) ⇒ Unit): Unit

[use case] Applies a function `f` to all elements of this general set.

[use case]

Applies a function `f` to all elements of this general set.

f

the function that is applied for its side-effect to every element. The result of function `f` is discarded.

Definition Classes
GenTraversableLikeGenTraversableOnce
Full Signature

29. def formatted(fmtstr: String): String

Returns string formatted according to given `format` string.

Returns string formatted according to given `format` string. Format strings are as for `String.format` (@see java.lang.String.format).

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to StringFormat performed by method any2stringfmt in scala.Predef.
Definition Classes
StringFormat
Annotations
()
30. final def getClass(): Class[_]

A representation that corresponds to the dynamic class of the receiver object.

A representation that corresponds to the dynamic class of the receiver object.

The nature of the representation is platform dependent.

returns

a representation that corresponds to the dynamic class of the receiver object.

Definition Classes
AnyRef → Any
Note

not specified by SLS as a member of AnyRef

31. def hashCode(): Int

The hashCode method for reference types.

The hashCode method for reference types. See hashCode in scala.Any.

returns

the hash code value for this object.

Definition Classes
GenSetLike → AnyRef → Any
32. def ifParSeq[R](isbody: (ParSeq[A]) ⇒ R): (TraversableOps[A])#Otherwise[R]

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
Definition Classes
TraversableOps
33. def intersect(that: GenSet[A]): Repr

Computes the intersection between this set and another set.

Computes the intersection between this set and another set.

that

the set to intersect with.

returns

a new set consisting of all elements that are both in this set and in the given set `that`.

34. final def isInstanceOf[T0]: Boolean

Test whether the dynamic type of the receiver object is `T0`.

Test whether the dynamic type of the receiver object is `T0`.

Note that the result of the test is modulo Scala's erasure semantics. Therefore the expression `1.isInstanceOf[String]` will return `false`, while the expression `List(1).isInstanceOf[List[String]]` will return `true`. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the specified type.

returns

`true` if the receiver object is an instance of erasure of type `T0`; `false` otherwise.

Definition Classes
Any
35. def isParIterable: Boolean

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
Definition Classes
TraversableOps
36. def isParSeq: Boolean

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
Definition Classes
TraversableOps
37. def isParallel: Boolean

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
Definition Classes
TraversableOps
38. abstract def map[B](f: (A) ⇒ B): GenSet[B]

[use case] Builds a new collection by applying a function to all elements of this general set.

[use case]

Builds a new collection by applying a function to all elements of this general set.

B

the element type of the returned collection.

f

the function to apply to each element.

returns

a new general set resulting from applying the given function `f` to each element of this general set and collecting the results.

Definition Classes
GenTraversableLike
Full Signature

39. abstract def max: A

[use case] Finds the largest element.

[use case]

Finds the largest element.

returns

the largest element of this general set.

Definition Classes
GenTraversableOnce
Full Signature

40. abstract def min: A

[use case] Finds the smallest element.

[use case]

Finds the smallest element.

returns

the smallest element of this general set

Definition Classes
GenTraversableOnce
Full Signature

41. final def ne(arg0: AnyRef): Boolean

Equivalent to `!(this eq that)`.

Equivalent to `!(this eq that)`.

returns

`true` if the argument is not a reference to the receiver object; `false` otherwise.

Definition Classes
AnyRef
42. final def notify(): Unit

Wakes up a single thread that is waiting on the receiver object's monitor.

Wakes up a single thread that is waiting on the receiver object's monitor.

Definition Classes
AnyRef
Note

not specified by SLS as a member of AnyRef

43. final def notifyAll(): Unit

Wakes up all threads that are waiting on the receiver object's monitor.

Wakes up all threads that are waiting on the receiver object's monitor.

Definition Classes
AnyRef
Note

not specified by SLS as a member of AnyRef

44. def par: ParSet[A]

Returns a parallel implementation of this collection.

Returns a parallel implementation of this collection.

For most collection types, this method creates a new parallel collection by copying all the elements. For these collection, `par` takes linear time. Mutable collections in this category do not produce a mutable parallel collection that has the same underlying dataset, so changes in one collection will not be reflected in the other one.

Specific collections (e.g. `ParArray` or `mutable.ParHashMap`) override this default behaviour by creating a parallel collection which shares the same underlying dataset. For these collections, `par` takes constant or sublinear time.

All parallel collections return a reference to themselves.

returns

a parallel implementation of this collection

Definition Classes
Parallelizable
45. abstract def product: A

[use case] Multiplies up the elements of this collection.

[use case]

Multiplies up the elements of this collection.

returns

the product of all elements in this general set of numbers of type `Int`. Instead of `Int`, any other type `T` with an implicit `Numeric[T]` implementation can be used as element type of the general set and as result type of `product`. Examples of such types are: `Long`, `Float`, `Double`, `BigInt`.

Definition Classes
GenTraversableOnce
Full Signature

46. abstract def sameElements(that: GenIterable[A]): Boolean

[use case] Checks if the other iterable collection contains the same elements in the same order as this general set.

[use case]

Checks if the other iterable collection contains the same elements in the same order as this general set.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Note: will not terminate for infinite-sized collections.

that

the collection to compare with.

returns

`true`, if both collections contain the same elements in the same order, `false` otherwise.

Definition Classes
GenIterableLike
Full Signature

47. def subsetOf(that: GenSet[A]): Boolean

Tests whether this set is a subset of another set.

Tests whether this set is a subset of another set.

that

the set to test.

returns

`true` if this set is a subset of `that`, i.e. if every element of this set is also an element of `that`.

48. abstract def sum: A

[use case] Sums up the elements of this collection.

[use case]

Sums up the elements of this collection.

returns

the sum of all elements in this general set of numbers of type `Int`. Instead of `Int`, any other type `T` with an implicit `Numeric[T]` implementation can be used as element type of the general set and as result type of `sum`. Examples of such types are: `Long`, `Float`, `Double`, `BigInt`.

Definition Classes
GenTraversableOnce
Full Signature

49. final def synchronized[T0](arg0: ⇒ T0): T0

Definition Classes
AnyRef
50. abstract def to[Col[_]]: Col[A]

[use case] Converts this general set into another by copying all elements.

[use case]

Converts this general set into another by copying all elements.

Note: will not terminate for infinite-sized collections.

Col

The collection type to build.

returns

a new collection containing all elements of this general set.

Definition Classes
GenTraversableOnce
Full Signature

51. abstract def toArray: Array[A]

[use case] Converts this general set to an array.

[use case]

Converts this general set to an array.

Note: will not terminate for infinite-sized collections.

returns

an array containing all elements of this general set. An `ClassTag` must be available for the element type of this general set.

Definition Classes
GenTraversableOnce
Full Signature

52. abstract def toMap[T, U]: Map[T, U]

[use case] Converts this general set to a map.

[use case]

Converts this general set to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.

Note: will not terminate for infinite-sized collections.

returns

a map of type `immutable.Map[T, U]` containing all key/value pairs of type `(T, U)` of this general set.

Definition Classes
GenTraversableOnce
Full Signature

53. def toParArray: ParArray[A]

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
Definition Classes
TraversableOps
54. def toString(): String

Creates a String representation of this object.

Creates a String representation of this object. The default representation is platform dependent. On the java platform it is the concatenation of the class name, "@", and the object's hashcode in hexadecimal.

returns

a String representation of the object.

Definition Classes
Function1 → AnyRef → Any
55. final def wait(): Unit

Definition Classes
AnyRef
Annotations
()
56. final def wait(arg0: Long, arg1: Int): Unit

Definition Classes
AnyRef
Annotations
()
57. final def wait(arg0: Long): Unit

Definition Classes
AnyRef
Annotations
()
58. abstract def zip[B](that: GenIterable[B]): GenSet[(A, B)]

[use case] Returns a general set formed from this general set and another iterable collection by combining corresponding elements in pairs.

[use case]

Returns a general set formed from this general set and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.

Note: might return different results for different runs, unless the underlying collection type is ordered.

B

the type of the second half of the returned pairs

that

The iterable providing the second half of each result pair

returns

a new general set containing pairs consisting of corresponding elements of this general set and `that`. The length of the returned collection is the minimum of the lengths of this general set and `that`.

Definition Classes
GenIterableLike
Full Signature

59. abstract def zipAll[B](that: Iterable[B], thisElem: A, thatElem: B): GenSet[(A, B)]

[use case] Returns a general set formed from this general set and another iterable collection by combining corresponding elements in pairs.

[use case]

Returns a general set formed from this general set and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.

Note: might return different results for different runs, unless the underlying collection type is ordered.

B

the type of the second half of the returned pairs

that

The iterable providing the second half of each result pair

thisElem

the element to be used to fill up the result if this general set is shorter than `that`.

thatElem

the element to be used to fill up the result if `that` is shorter than this general set.

returns

a new general set containing pairs consisting of corresponding elements of this general set and `that`. The length of the returned collection is the maximum of the lengths of this general set and `that`. If this general set is shorter than `that`, `thisElem` values are used to pad the result. If `that` is shorter than this general set, `thatElem` values are used to pad the result.

Definition Classes
GenIterableLike
Full Signature

60. abstract def zipWithIndex: GenSet[(A, Int)]

[use case] Zips this general set with its indices.

[use case]

Zips this general set with its indices.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

A new general set containing pairs consisting of all elements of this general set paired with their index. Indices start at `0`.

Definition Classes
GenIterableLike
Full Signature

abstract def zipWithIndex[A1 >: A, That](implicit bf: CanBuildFrom[Repr, (A1, Int), That]): That

Example:
1. `List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))`

61. def |(that: GenSet[A]): Repr

Computes the union between this set and another set.

Computes the union between this set and another set.

Note: Same as `union`.

that

the set to form the union with.

returns

a new set consisting of all elements that are in this set or in the given set `that`.

62. def →[B](y: B): (GenSetLike[A, Repr], B)

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to ArrowAssoc[GenSetLike[A, Repr]] performed by method any2ArrowAssoc in scala.Predef.
Definition Classes
ArrowAssoc

1. def +(other: String): String

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to StringAdd performed by method any2stringadd in scala.Predef.
This implicitly inherited member is shadowed by one or more members in this class.
To access this member you can use a type ascription:
`(genSetLike: StringAdd).+(other)`
Definition Classes
2. val self: Any

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to StringAdd performed by method any2stringadd in scala.Predef.
This implicitly inherited member is ambiguous. One or more implicitly inherited members have similar signatures, so calling this member may produce an ambiguous implicit conversion compiler error.
To access this member you can use a type ascription:
`(genSetLike: StringAdd).self`
Definition Classes
3. val self: Any

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to StringFormat performed by method any2stringfmt in scala.Predef.
This implicitly inherited member is ambiguous. One or more implicitly inherited members have similar signatures, so calling this member may produce an ambiguous implicit conversion compiler error.
To access this member you can use a type ascription:
`(genSetLike: StringFormat).self`
Definition Classes
StringFormat

Deprecated Value Members

1. def /:\[A1 >: A](z: A1)(op: (A1, A1) ⇒ A1): A1

A syntactic sugar for out of order folding.

A syntactic sugar for out of order folding. See `fold`.

Example:

```scala> val a = LinkedList(1,2,3,4)

scala> val b = (a /:\ 5)(_+_)
b: Int = 15```
Definition Classes
GenTraversableOnce
Annotations
Deprecated

(Since version 2.10.0) use fold instead

2. def x: GenSetLike[A, Repr]

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to ArrowAssoc[GenSetLike[A, Repr]] performed by method any2ArrowAssoc in scala.Predef.
This implicitly inherited member is ambiguous. One or more implicitly inherited members have similar signatures, so calling this member may produce an ambiguous implicit conversion compiler error.
To access this member you can use a type ascription:
`(genSetLike: ArrowAssoc[GenSetLike[A, Repr]]).x`
Definition Classes
ArrowAssoc
Annotations
Deprecated

(Since version 2.10.0) Use `leftOfArrow instead`

3. def x: GenSetLike[A, Repr]

Implicit information
This member is added by an implicit conversion from GenSetLike[A, Repr] to Ensuring[GenSetLike[A, Repr]] performed by method any2Ensuring in scala.Predef.
This implicitly inherited member is ambiguous. One or more implicitly inherited members have similar signatures, so calling this member may produce an ambiguous implicit conversion compiler error.
To access this member you can use a type ascription:
`(genSetLike: Ensuring[GenSetLike[A, Repr]]).x`
Definition Classes
Ensuring
Annotations
Deprecated

(Since version 2.10.0) Use `resultOfEnsuring instead`