The type implementing this traversable
The type implementing this traversable
A class supporting filtered operations.
Appends a single element to this buffer.
Appends a single element to this buffer.
the element to append.
the buffer itself
Prepends a single element to this buffer.
Prepends a single element to this buffer.
the element to prepend.
the buffer itself.
Selects an element by its index in the buffer.
Selects an element by its index in the buffer.
Example:
scala> val x = LinkedList(1, 2, 3, 4, 5) x: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4, 5) scala> x(3) res1: Int = 4
the element of this buffer at index idx, where 0 indicates the first element.
if idx does not satisfy 0 <= idx < length.
Clears the buffer's contents.
Clears the buffer's contents. After this operation, the buffer is empty.
Inserts new elements at a given index into this buffer.
Inserts new elements at a given index into this buffer.
the index where new elements are inserted.
the traversable collection containing the elements to insert.
if the index n is not in the valid range
0 <= n <= length.
Creates a new iterator over all elements contained in this iterable object.
Creates a new iterator over all elements contained in this iterable object.
the new iterator
The length of the buffer.
The length of the buffer.
Note: xs.length and xs.size yield the same result.
the number of elements in this buffer.
Removes the element at a given index from this buffer.
Removes the element at a given index from this buffer.
the index which refers to the element to delete.
the previous element at index n
if the if the index n is not in the valid range
0 <= n < length.
Replaces element at given index with a new value.
Replaces element at given index with a new value.
if the index is not valid.
Creates a new collection containing both the elements of this collection and the provided traversable object.
Creates a new collection containing both the elements of this collection and the provided traversable object.
the traversable object.
a new collection consisting of all the elements of this collection and xs.
(Changed in version 2.8.0) ++ creates a new buffer. Use ++= to add an element from this buffer and return that buffer itself.
[use case] Returns a new buffer containing the elements from the left hand operand followed by the elements from the right hand operand.
Returns a new buffer containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the buffer is the most specific superclass encompassing the element types of the two operands.
Example:
scala> val a = LinkedList(1) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val b = LinkedList(2) b: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val c = a ++ b c: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2) scala> val d = LinkedList('a') d: scala.collection.mutable.LinkedList[Char] = LinkedList(a) scala> val e = c ++ d e: scala.collection.mutable.LinkedList[AnyVal] = LinkedList(1, 2, a)
the element type of the returned collection.
the traversable to append.
a new buffer which contains all elements of this buffer
followed by all elements of that.
As with ++, returns a new collection containing the elements from the
left operand followed by the elements from the right operand.
As with ++, returns a new collection containing the elements from the
left operand followed by the elements from the right operand.
It differs from ++ in that the right operand determines the type of
the resulting collection rather than the left one.
Mnemonic: the COLon is on the side of the new COLlection type.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
This overload exists because: for the implementation of ++: we should
reuse that of ++ because many collections override it with more
efficient versions.
Since TraversableOnce has no ++ method, we have to implement that
directly, but Traversable and down can use the overload.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the traversable to append.
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr
and the new element type B.
a new collection of type That which contains all elements
of this buffer followed by all elements of that.
[use case] As with ++, returns a new collection containing the elements from the left operand followed by the
elements from the right operand.
As with ++, returns a new collection containing the elements from the left operand followed by the
elements from the right operand.
It differs from ++ in that the right operand determines the type of
the resulting collection rather than the left one.
Mnemonic: the COLon is on the side of the new COLlection type.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
the element type of the returned collection.
the traversable to append.
a new buffer which contains all elements of this buffer
followed by all elements of that.
Appends all elements produced by a TraversableOnce to this buffer.
Appends all elements produced by a TraversableOnce to this buffer.
the TraversableOnce producing the elements to append.
the buffer itself.
Prepends elements to this buffer.
Prepends elements to this buffer.
the TraversableOnce containing the elements to prepend.
the buffer itself.
[use case] A copy of the buffer with an element prepended.
A copy of the buffer with an element prepended.
Note that :-ending operators are right associative (see example).
A mnemonic for +: vs. :+ is: the COLon goes on the COLlection side.
Also, the original buffer is not modified, so you will want to capture the result.
Example:
scala> val x = LinkedList(1) x: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val y = 2 +: x y: scala.collection.mutable.LinkedList[Int] = LinkedList(2, 1) scala> println(x) LinkedList(1)
the prepended element
a new buffer consisting of elem followed
by all elements of this buffer.
Appends two or more elements to this buffer.
Appends two or more elements to this buffer.
the first element to append.
the second element to append.
the remaining elements to append.
the buffer itself
Creates a new collection with all the elements of this collection except the two or more specified elements.
Creates a new collection with all the elements of this collection except the two or more specified elements.
the first element to remove.
the second element to remove.
the remaining elements to remove.
a new collection consisting of all the elements of this collection except
elem1, elem2 and those in elems.
(Changed in version 2.8.0) - creates a new buffer. Use -= to remove an element from this buffer and return that buffer itself.
Creates a new collection with all the elements of this collection except elem.
Creates a new collection with all the elements of this collection except elem.
the element to remove.
a new collection consisting of all the elements of this collection except elem.
(Changed in version 2.8.0) - creates a new buffer. Use -= to remove an element from this buffer and return that buffer itself.
Creates a new collection with all the elements of this collection except those provided by the specified traversable object.
Creates a new collection with all the elements of this collection except those provided by the specified traversable object.
the traversable object.
a new collection with all the elements of this collection except
those in xs
(Changed in version 2.8.0) -- creates a new buffer. Use --= to remove an element from this buffer and return that buffer itself.
Removes all elements produced by an iterator from this buffer.
Removes all elements produced by an iterator from this buffer.
the iterator producing the elements to remove.
the buffer itself
Removes a single element from this buffer, at its first occurrence.
Removes a single element from this buffer, at its first occurrence. If the buffer does not contain that element, it is unchanged.
the element to remove.
the buffer itself
Removes two or more elements from this buffer.
Removes two or more elements from this buffer.
the first element to remove.
the second element to remove.
the remaining elements to remove.
the buffer itself
Applies a binary operator to a start value and all elements of this buffer, going left to right.
Applies a binary operator to a start value and all elements of this buffer, going left to right.
Note: /: is alternate syntax for foldLeft; z /: xs is the same as
xs foldLeft z.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this buffer,
going left to right with the start value z on the left:
op(...op(op(z, x_1), x_2), ..., x_n)
where x1, ..., xn are the elements of this buffer.
[use case] A copy of this buffer with an element appended.
A copy of this buffer with an element appended.
A mnemonic for +: vs. :+ is: the COLon goes on the COLlection side.
Example:
scala> import scala.collection.mutable.LinkedList import scala.collection.mutable.LinkedList scala> val a = LinkedList(1) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val b = a :+ 2 b: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2) scala> println(a) LinkedList(1)
the appended element
a new buffer consisting of
all elements of this buffer followed by elem.
Applies a binary operator to all elements of this buffer and a start value, going right to left.
Applies a binary operator to all elements of this buffer and a start value, going right to left.
Note: :\ is alternate syntax for foldRight; xs :\ z is the same as
xs foldRight z.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value
the binary operator
the result of inserting op between consecutive elements of this buffer,
going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this buffer.
Send a message to this scriptable object.
Send a message to this scriptable object.
the message to send.
Appends all elements of this buffer to a string builder.
Appends all elements of this buffer to a string builder.
The written text consists of the string representations (w.r.t. the method
toString) of all elements of this buffer without any separator string.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> val h = a.addString(b) b: StringBuilder = 1234
the string builder to which elements are appended.
the string builder b to which elements were appended.
Appends all elements of this buffer to a string builder using a separator string.
Appends all elements of this buffer to a string builder using a separator string.
The written text consists of the string representations (w.r.t. the method toString)
of all elements of this buffer, separated by the string sep.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b, ", ") res0: StringBuilder = 1, 2, 3, 4
the string builder to which elements are appended.
the separator string.
the string builder b to which elements were appended.
Appends all elements of this buffer to a string builder using start, end, and separator strings.
Appends all elements of this buffer to a string builder using start, end, and separator strings.
The written text begins with the string start and ends with the string end.
Inside, the string representations (w.r.t. the method toString)
of all elements of this buffer are separated by the string sep.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b, "LinkedList(", ", ", ")") res1: StringBuilder = LinkedList(1, 2, 3, 4)
the string builder to which elements are appended.
the starting string.
the separator string.
the ending string.
the string builder b to which elements were appended.
Aggregates the results of applying an operator to subsequent elements.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold and reduce. It has similar
semantics, but does not require the result to be a supertype of the
element type. It traverses the elements in different partitions
sequentially, using seqop to update the result, and then applies
combop to results from different partitions. The implementation of
this operation may operate on an arbitrary number of collection
partitions, so combop may be invoked an arbitrary number of times.
For example, one might want to process some elements and then produce
a Set. In this case, seqop would process an element and append it
to the list, while combop would concatenate two lists from different
partitions together. The initial value z would be an empty set.
pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)
Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).
the type of accumulated results
the initial value for the accumulated result of the partition - this
will typically be the neutral element for the seqop operator (e.g.
Nil for list concatenation or 0 for summation) and may be evaluated
more than once
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
Composes this partial function with a transformation function that gets applied to results of this partial function.
Composes this partial function with a transformation function that gets applied to results of this partial function.
the result type of the transformation function.
the transformation function
a partial function with the same domain as this partial function, which maps
arguments x to k(this(x)).
Appends the given elements to this buffer.
Appends the given elements to this buffer.
the elements to append.
Appends the elements contained in a traversable object to this buffer.
Appends the elements contained in a traversable object to this buffer.
the traversable object containing the elements to append.
Applies this partial function to the given argument when it is contained in the function domain.
Applies this partial function to the given argument when it is contained in the function domain. Applies fallback function where this partial function is not defined.
Note that expression pf.applyOrElse(x, default) is equivalent to
if(pf isDefinedAt x) pf(x) else default(x)
except that applyOrElse method can be implemented more efficiently.
For all partial function literals compiler generates applyOrElse implementation which
avoids double evaluation of pattern matchers and guards.
This makes applyOrElse the basis for the efficient implementation for many operations and scenarios, such as:
orElse/andThen chains does not lead to
excessive apply/isDefinedAt evaluationlift and unlift do not evaluate source functions twice on each invocationrunWith allows efficient imperative-style combining of partial functions
with conditionally applied actions For non-literal partial function classes with nontrivial isDefinedAt method
it is recommended to override applyOrElse with custom implementation that avoids
double isDefinedAt evaluation. This may result in better performance
and more predictable behavior w.r.t. side effects.
the function argument
the fallback function
the result of this function or fallback function application.
2.10
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
The object with which this buffer should be compared
true, if this buffer can possibly equal that, false otherwise. The test
takes into consideration only the run-time types of objects but ignores their elements.
Return a clone of this buffer.
Return a clone of this buffer.
a Buffer with the same elements.
[use case] Builds a new collection by applying a partial function to all elements of this buffer on which the function is defined.
Builds a new collection by applying a partial function to all elements of this buffer on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the buffer.
a new buffer resulting from applying the given partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Finds the first element of the buffer for which the given partial function is defined, and applies the partial function to it.
Finds the first element of the buffer for which the given partial function is defined, and applies the partial function to it.
the partial function
an option value containing pf applied to the first
value for which it is defined, or None if none exists.
Seq("a", 1, 5L).collectFirst({ case x: Int => x*10 }) = Some(10)
Iterates over combinations.
Iterates over combinations.
An Iterator which traverses the possible n-element combinations of this buffer.
"abbbc".combinations(2) = Iterator(ab, ac, bb, bc)
The factory companion object that builds instances of class Buffer.
The factory companion object that builds instances of class Buffer.
(or its Iterable superclass where class Buffer is not a Seq.)
Composes two instances of Function1 in a new Function1, with this function applied last.
Composes two instances of Function1 in a new Function1, with this function applied last.
the type to which function g can be applied
a function A => T1
a new function f such that f(x) == apply(g(x))
Tests whether this buffer contains a given value as an element.
Tests whether this buffer contains a given value as an element.
the element to test.
true if this buffer has an element that is equal (as
determined by ==) to elem, false otherwise.
Tests whether this buffer contains a given sequence as a slice.
Tests whether this buffer contains a given sequence as a slice.
the sequence to test
true if this buffer contains a slice with the same elements
as that, otherwise false.
[use case] Copies elements of this buffer to an array.
Copies elements of this buffer to an array.
Fills the given array xs with at most len elements of
this buffer, starting at position start.
Copying will stop once either the end of the current buffer is reached,
or the end of the array is reached, or len elements have been copied.
the array to fill.
the starting index.
the maximal number of elements to copy.
[use case] Copies values of this buffer to an array.
Copies values of this buffer to an array.
Fills the given array xs with values of this buffer.
Copying will stop once either the end of the current buffer is reached,
or the end of the array is reached.
the array to fill.
[use case] Copies values of this buffer to an array.
Copies values of this buffer to an array.
Fills the given array xs with values of this buffer, beginning at index start.
Copying will stop once either the end of the current buffer is reached,
or the end of the array is reached.
the array to fill.
the starting index.
Copies all elements of this buffer to a buffer.
Copies all elements of this buffer to a buffer.
The buffer to which elements are copied.
Tests whether every element of this buffer relates to the corresponding element of another sequence by satisfying a test predicate.
Tests whether every element of this buffer relates to the corresponding element of another sequence by satisfying a test predicate.
the type of the elements of that
the other sequence
the test predicate, which relates elements from both sequences
true if both sequences have the same length and
p(x, y) is true for all corresponding elements x of this buffer
and y of that, otherwise false.
Counts the number of elements in the buffer which satisfy a predicate.
Counts the number of elements in the buffer which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p.
[use case] Computes the multiset difference between this buffer and another sequence.
Computes the multiset difference between this buffer and another sequence.
the sequence of elements to remove
a new buffer which contains all elements of this buffer
except some of occurrences of elements that also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will not form
part of the result, but any following occurrences will.
Builds a new buffer from this buffer without any duplicate elements.
Builds a new buffer from this buffer without any duplicate elements.
A new buffer which contains the first occurrence of every element of this buffer.
Selects all elements except first n ones.
Selects all elements except first n ones.
the number of elements to drop from this buffer.
a buffer consisting of all elements of this buffer except the first n ones, or else the
empty buffer, if this buffer has less than n elements.
Selects all elements except last n ones.
Selects all elements except last n ones.
The number of elements to take
a buffer consisting of all elements of this buffer except the last n ones, or else the
empty buffer, if this buffer has less than n elements.
Drops longest prefix of elements that satisfy a predicate.
Drops longest prefix of elements that satisfy a predicate.
the longest suffix of this buffer whose first element
does not satisfy the predicate p.
Tests whether this buffer ends with the given sequence.
Tests whether this buffer ends with the given sequence.
the sequence to test
true if this buffer has that as a suffix, false otherwise.
The equals method for arbitrary sequences.
The equals method for arbitrary sequences. Compares this sequence to some other object.
The object to compare the sequence to
true if that is a sequence that has the same elements as
this sequence in the same order, false otherwise
Tests whether a predicate holds for some of the elements of this buffer.
Tests whether a predicate holds for some of the elements of this buffer.
the predicate used to test elements.
true if the given predicate p holds for some of the
elements of this buffer, otherwise false.
Selects all elements of this buffer which satisfy a predicate.
Selects all elements of this buffer which satisfy a predicate.
the predicate used to test elements.
a new buffer consisting of all elements of this buffer that satisfy the given
predicate p. The order of the elements is preserved.
Selects all elements of this buffer which do not satisfy a predicate.
Selects all elements of this buffer which do not satisfy a predicate.
the predicate used to test elements.
a new buffer consisting of all elements of this buffer that do not satisfy the given
predicate p. The order of the elements is preserved.
Finds the first element of the buffer satisfying a predicate, if any.
Finds the first element of the buffer satisfying a predicate, if any.
the predicate used to test elements.
an option value containing the first element in the buffer
that satisfies p, or None if none exists.
[use case] Builds a new collection by applying a function to all elements of this buffer and using the elements of the resulting collections.
Builds a new collection by applying a function to all elements of this buffer and using the elements of the resulting collections.
For example:
def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")
The type of the resulting collection is guided by the static type of buffer. This might cause unexpected results sometimes. For example:
// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet) // lettersOf will return a Set[Char], not a Seq def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq) // xs will be an Iterable[Int] val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2) // ys will be a Map[Int, Int] val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
the element type of the returned collection.
the function to apply to each element.
a new buffer resulting from applying the given collection-valued function
f to each element of this buffer and concatenating the results.
[use case] Converts this buffer of traversable collections into a buffer formed by the elements of these traversable collections.
Converts this buffer of traversable collections into a buffer formed by the elements of these traversable collections.
The resulting collection's type will be guided by the static type of buffer. For example:
val xs = List(Set(1, 2, 3), Set(1, 2, 3)) // xs == List(1, 2, 3, 1, 2, 3) val ys = Set(List(1, 2, 3), List(3, 2, 1)) // ys == Set(1, 2, 3)
the type of the elements of each traversable collection.
a new buffer resulting from concatenating all element buffers.
Folds the elements of this buffer using the specified associative binary operator.
Folds the elements of this buffer using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
a type parameter for the binary operator, a supertype of A.
a neutral element for the fold operation; may be added to the result
an arbitrary number of times, and must not change the result (e.g., Nil for list concatenation,
0 for addition, or 1 for multiplication.)
a binary operator that must be associative
the result of applying fold operator op between all the elements and z
Applies a binary operator to a start value and all elements of this buffer, going left to right.
Applies a binary operator to a start value and all elements of this buffer, going left to right.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this buffer,
going left to right with the start value z on the left:
op(...op(z, x_1), x_2, ..., x_n)
where x1, ..., xn are the elements of this buffer.
Applies a binary operator to all elements of this buffer and a start value, going right to left.
Applies a binary operator to all elements of this buffer and a start value, going right to left.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this buffer,
going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this buffer.
Tests whether a predicate holds for all elements of this buffer.
Tests whether a predicate holds for all elements of this buffer.
the predicate used to test elements.
true if the given predicate p holds for all elements
of this buffer, otherwise false.
[use case] Applies a function f to all elements of this buffer.
Applies a function f to all elements of this buffer.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the function that is applied for its side-effect to every element.
The result of function f is discarded.
Returns string formatted according to given format string.
Returns string formatted according to given format string.
Format strings are as for String.format
(@see java.lang.String.format).
The generic builder that builds instances of Buffer
at arbitrary element types.
The generic builder that builds instances of Buffer
at arbitrary element types.
Partitions this buffer into a map of buffers according to some discriminator function.
Partitions this buffer into a map of buffers according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new buffer.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to buffers such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k) That is, every key k is bound to a buffer of those elements x
for which f(x) equals k.
Partitions elements in fixed size buffers.
Partitions elements in fixed size buffers.
the number of elements per group
An iterator producing buffers of size size, except the
last will be truncated if the elements don't divide evenly.
scala.collection.Iterator, method grouped
Tests whether this buffer is known to have a finite size.
Tests whether this buffer is known to have a finite size.
All strict collections are known to have finite size. For a non-strict
collection such as Stream, the predicate returns true if all
elements have been computed. It returns false if the stream is
not yet evaluated to the end.
Note: many collection methods will not work on collections of infinite sizes.
true if this collection is known to have finite size,
false otherwise.
Hashcodes for Buffer produce a value from the hashcodes of all the
elements of the buffer.
Hashcodes for Buffer produce a value from the hashcodes of all the
elements of the buffer.
Selects the first element of this buffer.
Selects the first element of this buffer.
the first element of this buffer.
if the buffer is empty.
Optionally selects the first element.
Optionally selects the first element.
the first element of this buffer if it is nonempty,
None if it is empty.
[use case] Finds index of first occurrence of some value in this buffer after or at some start index.
Finds index of first occurrence of some value in this buffer after or at some start index.
the element value to search for.
the start index
the index >= from of the first element of this buffer that is equal (as determined by ==)
to elem, or -1, if none exists.
[use case] Finds index of first occurrence of some value in this buffer.
Finds index of first occurrence of some value in this buffer.
the element value to search for.
the index of the first element of this buffer that is equal (as determined by ==)
to elem, or -1, if none exists.
Finds first index after or at a start index where this buffer contains a given sequence as a slice.
Finds first index after or at a start index where this buffer contains a given sequence as a slice.
the sequence to test
the start index
the first index >= from such that the elements of this buffer starting at this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds first index where this buffer contains a given sequence as a slice.
Finds first index where this buffer contains a given sequence as a slice.
the sequence to test
the first index such that the elements of this buffer starting at this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds index of the first element satisfying some predicate after or at some start index.
Finds index of the first element satisfying some predicate after or at some start index.
the predicate used to test elements.
the start index
the index >= from of the first element of this buffer that satisfies the predicate p,
or -1, if none exists.
Finds index of first element satisfying some predicate.
Finds index of first element satisfying some predicate.
the predicate used to test elements.
the index of the first element of this buffer that satisfies the predicate p,
or -1, if none exists.
Produces the range of all indices of this sequence.
Produces the range of all indices of this sequence.
a Range value from 0 to one less than the length of this buffer.
Selects all elements except the last.
Selects all elements except the last.
a buffer consisting of all elements of this buffer except the last one.
if the buffer is empty.
Iterates over the inits of this buffer.
Iterates over the inits of this buffer. The first value will be this
buffer and the final one will be an empty buffer, with the intervening
values the results of successive applications of init.
an iterator over all the inits of this buffer
List(1,2,3).inits = Iterator(List(1,2,3), List(1,2), List(1), Nil)
Inserts new elements at a given index into this buffer.
Inserts new elements at a given index into this buffer.
the index where new elements are inserted.
the traversable collection containing the elements to insert.
if the index n is not in the valid range
0 <= n <= length.
[use case] Computes the multiset intersection between this buffer and another sequence.
Computes the multiset intersection between this buffer and another sequence.
the sequence of elements to intersect with.
a new buffer which contains all elements of this buffer
which also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will be retained
in the result, but any following occurrences will be omitted.
Tests whether this buffer contains given index.
Tests whether this buffer contains given index.
The implementations of methods apply and isDefinedAt turn a Seq[A] into
a PartialFunction[Int, A].
the index to test
true if this buffer contains an element at position idx, false otherwise.
Tests whether this buffer is empty.
Tests whether this buffer is empty.
true if the buffer contain no elements, false otherwise.
Tests whether this buffer can be repeatedly traversed.
Tests whether this buffer can be repeatedly traversed.
true
Selects the last element.
Selects the last element.
The last element of this buffer.
If the buffer is empty.
[use case] Finds index of last occurrence of some value in this buffer before or at a given end index.
Finds index of last occurrence of some value in this buffer before or at a given end index.
the element value to search for.
the end index.
the index <= end of the last element of this buffer that is equal (as determined by ==)
to elem, or -1, if none exists.
[use case] Finds index of last occurrence of some value in this buffer.
Finds index of last occurrence of some value in this buffer.
the element value to search for.
the index of the last element of this buffer that is equal (as determined by ==)
to elem, or -1, if none exists.
Finds last index before or at a given end index where this buffer contains a given sequence as a slice.
Finds last index before or at a given end index where this buffer contains a given sequence as a slice.
the sequence to test
the end index
the last index <= end such that the elements of this buffer starting at this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds last index where this buffer contains a given sequence as a slice.
Finds last index where this buffer contains a given sequence as a slice.
the sequence to test
the last index such that the elements of this buffer starting a this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds index of last element satisfying some predicate before or at given end index.
Finds index of last element satisfying some predicate before or at given end index.
the predicate used to test elements.
the index <= end of the last element of this buffer that satisfies the predicate p,
or -1, if none exists.
Finds index of last element satisfying some predicate.
Finds index of last element satisfying some predicate.
the predicate used to test elements.
the index of the last element of this buffer that satisfies the predicate p,
or -1, if none exists.
Optionally selects the last element.
Optionally selects the last element.
the last element of this buffer$ if it is nonempty,
None if it is empty.
Compares the length of this buffer to a test value.
Compares the length of this buffer to a test value.
the test value that gets compared with the length.
A value x where
x < 0 if this.length < len x == 0 if this.length == len x > 0 if this.length > len
The method as implemented here does not call length directly; its running time
is O(length min len) instead of O(length). The method should be overwritten
if computing length is cheap.
Turns this partial function into an plain function returning an Option result.
Turns this partial function into an plain function returning an Option result.
a function that takes an argument x to Some(this(x)) if this
is defined for x, and to None otherwise.
Function.unlift
[use case] Builds a new collection by applying a function to all elements of this buffer.
Builds a new collection by applying a function to all elements of this buffer.
the element type of the returned collection.
the function to apply to each element.
a new buffer resulting from applying the given function
f to each element of this buffer and collecting the results.
[use case] Finds the largest element.
Finds the largest element.
the largest element of this buffer.
[use case] Finds the smallest element.
Finds the smallest element.
the smallest element of this buffer
Displays all elements of this buffer in a string.
Displays all elements of this buffer in a string.
a string representation of this buffer. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this buffer follow each other without any
separator string.
Displays all elements of this buffer in a string using a separator string.
Displays all elements of this buffer in a string using a separator string.
the separator string.
a string representation of this buffer. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this buffer are separated by the string sep.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this buffer in a string using start, end, and separator strings.
Displays all elements of this buffer in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this buffer. The resulting string
begins with the string start and ends with the string
end. Inside, the string representations (w.r.t. the method
toString) of all elements of this buffer are separated by
the string sep.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
The builder that builds instances of type Buffer[A]
The builder that builds instances of type Buffer[A]
Tests whether the buffer is not empty.
Tests whether the buffer is not empty.
true if the buffer contains at least one element, false otherwise.
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined.
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined.
the argument type of the fallback function
the result type of the fallback function
the fallback function
a partial function which has as domain the union of the domains
of this partial function and that. The resulting partial function
takes x to this(x) where this is defined, and to that(x) where it is not.
[use case] A copy of this buffer with an element value appended until a given target length is reached.
A copy of this buffer with an element value appended until a given target length is reached.
the target length
the padding value
a new buffer consisting of
all elements of this buffer followed by the minimal number of occurrences of elem so
that the resulting buffer has a length of at least len.
Returns a parallel implementation of this collection.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying
all the elements. For these collection, par takes linear time. Mutable collections
in this category do not produce a mutable parallel collection that has the same
underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray or mutable.ParHashMap) override this default
behaviour by creating a parallel collection which shares the same underlying dataset.
For these collections, par takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this buffer in two buffers according to a predicate.
Partitions this buffer in two buffers according to a predicate.
the predicate on which to partition.
a pair of buffers: the first buffer consists of all elements that
satisfy the predicate p and the second buffer consists of all elements
that don't. The relative order of the elements in the resulting buffers
is the same as in the original buffer.
[use case] Produces a new buffer where a slice of elements in this buffer is replaced by another sequence.
Produces a new buffer where a slice of elements in this buffer is replaced by another sequence.
the index of the first replaced element
the number of elements to drop in the original buffer
a new buffer consisting of all elements of this buffer
except that replaced elements starting from from are replaced
by patch.
Iterates over distinct permutations.
Iterates over distinct permutations.
An Iterator which traverses the distinct permutations of this buffer.
"abb".permutations = Iterator(abb, bab, bba)
Returns the length of the longest prefix whose elements all satisfy some predicate.
Returns the length of the longest prefix whose elements all satisfy some predicate.
the predicate used to test elements.
the length of the longest prefix of this buffer
such that every element of the segment satisfies the predicate p.
Prepends given elements to this buffer.
Prepends the elements contained in a traversable object to this buffer.
Prepends the elements contained in a traversable object to this buffer.
the collection containing the elements to prepend.
[use case] Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the product of all elements in this buffer of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the buffer and as result type of product.
Examples of such types are: Long, Float, Double, BigInt.
Provide a read-only view of this buffer as a sequence
Provide a read-only view of this buffer as a sequence
A sequence which refers to this buffer for all its operations.
Reduces the elements of this buffer using the specified associative binary operator.
Reduces the elements of this buffer using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
The result of applying reduce operator op between all the elements if the buffer is nonempty.
if this buffer is empty.
Applies a binary operator to all elements of this buffer, going left to right.
Applies a binary operator to all elements of this buffer, going left to right.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this buffer,
going left to right:
op( op( ... op(x_1, x_2) ..., x_{n-1}), x_n) where x1, ..., xn are the elements of this buffer.
if this buffer is empty.
Optionally applies a binary operator to all elements of this buffer, going left to right.
Optionally applies a binary operator to all elements of this buffer, going left to right.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op) is this buffer is nonempty,
None otherwise.
Reduces the elements of this buffer, if any, using the specified associative binary operator.
Reduces the elements of this buffer, if any, using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
An option value containing result of applying reduce operator op between all
the elements if the collection is nonempty, and None otherwise.
Applies a binary operator to all elements of this buffer, going right to left.
Applies a binary operator to all elements of this buffer, going right to left.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this buffer,
going right to left:
op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...)) where x1, ..., xn are the elements of this buffer.
if this buffer is empty.
Optionally applies a binary operator to all elements of this buffer, going right to left.
Optionally applies a binary operator to all elements of this buffer, going right to left.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op) is this buffer is nonempty,
None otherwise.
Removes a number of elements from a given index position.
Removes a number of elements from a given index position.
the index which refers to the first element to remove.
the number of elements to remove.
if count < 0.
if the index n is not in the valid range
0 <= n <= length - count.
The collection of type buffer underlying this TraversableLike object.
The collection of type buffer underlying this TraversableLike object.
By default this is implemented as the TraversableLike object itself,
but this can be overridden.
Returns new buffer wih elements in reversed order.
Returns new buffer wih elements in reversed order.
A new buffer with all elements of this buffer in reversed order.
An iterator yielding elements in reversed order.
An iterator yielding elements in reversed order.
Note: xs.reverseIterator is the same as xs.reverse.iterator but might be more efficient.
an iterator yielding the elements of this buffer in reversed order
[use case] Builds a new collection by applying a function to all elements of this buffer and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this buffer and collecting the results in reversed order.
Note: xs.reverseMap(f) is the same as xs.reverse.map(f) but might be more efficient.
the element type of the returned collection.
the function to apply to each element.
a new buffer resulting from applying the given function
f to each element of this buffer and collecting the results in reversed order.
Composes this partial function with an action function which gets applied to results of this partial function.
Composes this partial function with an action function which gets applied to results of this partial function. The action function is invoked only for its side effects; its result is ignored.
Note that expression pf.runWith(action)(x) is equivalent to
if(pf isDefinedAt x) { action(pf(x)); true } else false
except that runWith is implemented via applyOrElse and thus potentially more efficient.
Using runWith avoids double evaluation of pattern matchers and guards for partial function literals.
the action function
a function which maps arguments x to isDefinedAt(x). The resulting function
runs action(this(x)) where this is defined.
2.10
applyOrElse.
[use case] Checks if the other iterable collection contains the same elements in the same order as this buffer.
Checks if the other iterable collection contains the same elements in the same order as this buffer.
the collection to compare with.
true, if both collections contain the same elements in the same order, false otherwise.
Computes a prefix scan of the elements of the collection.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z may be applied more than once.
element type of the resulting collection
type of the resulting collection
neutral element for the operator op
the associative operator for the scan
combiner factory which provides a combiner
a new buffer containing the prefix scan of the elements in this buffer
Produces a collection containing cumulative results of applying the operator going left to right.
Produces a collection containing cumulative results of applying the operator going left to right.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr
and the new element type B.
collection with intermediate results
Produces a collection containing cumulative results of applying the operator going right to left.
Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr
and the new element type B.
collection with intermediate results
(Changed in version 2.9.0) The behavior of scanRight has changed. The previous behavior can be reproduced with scanRight.reverse.
Computes length of longest segment whose elements all satisfy some predicate.
Computes length of longest segment whose elements all satisfy some predicate.
the predicate used to test elements.
the index where the search starts.
the length of the longest segment of this buffer starting from index from
such that every element of the segment satisfies the predicate p.
A version of this collection with all of the operations implemented sequentially (i.
A version of this collection with all of the operations implemented sequentially (i.e. in a single-threaded manner).
This method returns a reference to this collection. In parallel collections, it is redefined to return a sequential implementation of this collection. In both cases, it has O(1) complexity.
a sequential view of the collection.
The size of this buffer, equivalent to length.
The size of this buffer, equivalent to length.
the number of elements in this buffer.
Selects an interval of elements.
Selects an interval of elements. The returned collection is made up
of all elements x which satisfy the invariant:
from <= indexOf(x) < until
a buffer containing the elements greater than or equal to
index from extending up to (but not including) index until
of this buffer.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)
the number of elements per group
the distance between the first elements of successive groups (defaults to 1)
An iterator producing buffers of size size, except the
last and the only element will be truncated if there are
fewer elements than size.
scala.collection.Iterator, method sliding
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)
the number of elements per group
An iterator producing buffers of size size, except the
last and the only element will be truncated if there are
fewer elements than size.
scala.collection.Iterator, method sliding
Sorts this Buffer according to the Ordering which results from transforming
an implicitly given Ordering with a transformation function.
Sorts this Buffer according to the Ordering which results from transforming
an implicitly given Ordering with a transformation function.
the target type of the transformation f, and the type where
the ordering ord is defined.
the transformation function mapping elements
to some other domain B.
the ordering assumed on domain B.
a buffer consisting of the elements of this buffer
sorted according to the ordering where x < y if
ord.lt(f(x), f(y)).
val words = "The quick brown fox jumped over the lazy dog".split(' ') // this works because scala.Ordering will implicitly provide an Ordering[Tuple2[Int, Char]] words.sortBy(x => (x.length, x.head)) res0: Array[String] = Array(The, dog, fox, the, lazy, over, brown, quick, jumped)
Sorts this buffer according to a comparison function.
Sorts this buffer according to a comparison function.
The sort is stable. That is, elements that are equal (as determined by
lt) appear in the same order in the sorted sequence as in the original.
the comparison function which tests whether its first argument precedes its second argument in the desired ordering.
a buffer consisting of the elements of this buffer
sorted according to the comparison function lt.
List("Steve", "Tom", "John", "Bob").sortWith(_.compareTo(_) < 0) = List("Bob", "John", "Steve", "Tom")
Sorts this buffer according to an Ordering.
Sorts this buffer according to an Ordering.
The sort is stable. That is, elements that are equal (as determined by
lt) appear in the same order in the sorted sequence as in the original.
the ordering to be used to compare elements.
a buffer consisting of the elements of this buffer
sorted according to the ordering ord.
Splits this buffer into a prefix/suffix pair according to a predicate.
Splits this buffer into a prefix/suffix pair according to a predicate.
Note: c span p is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p), provided the evaluation of the
predicate p does not cause any side-effects.
a pair consisting of the longest prefix of this buffer whose
elements all satisfy p, and the rest of this buffer.
Splits this buffer into two at a given position.
Splits this buffer into two at a given position.
Note: c splitAt n is equivalent to (but possibly more efficient than)
(c take n, c drop n).
the position at which to split.
a pair of buffers consisting of the first n
elements of this buffer, and the other elements.
Tests whether this buffer contains the given sequence at a given index.
Tests whether this buffer contains the given sequence at a given index.
Note: If the both the receiver object this and the argument
that are infinite sequences this method may not terminate.
the sequence to test
the index where the sequence is searched.
true if the sequence that is contained in this buffer at
index offset, otherwise false.
Tests whether this buffer starts with the given sequence.
Tests whether this buffer starts with the given sequence.
the sequence to test
true if this collection has that as a prefix, false otherwise.
Defines the prefix of this object's toString representation.
Defines the prefix of this object's toString representation.
a string representation which starts the result of toString applied to this set.
Unless overridden this is simply "Buffer".
[use case] Sums up the elements of this collection.
Sums up the elements of this collection.
the sum of all elements in this buffer of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the buffer and as result type of sum.
Examples of such types are: Long, Float, Double, BigInt.
Selects all elements except the first.
Selects all elements except the first.
a buffer consisting of all elements of this buffer except the first one.
if the buffer is empty.
Iterates over the tails of this buffer.
Iterates over the tails of this buffer. The first value will be this
buffer and the final one will be an empty buffer, with the intervening
values the results of successive applications of tail.
an iterator over all the tails of this buffer
List(1,2,3).tails = Iterator(List(1,2,3), List(2,3), List(3), Nil)
Selects first n elements.
Selects first n elements.
the number of elements to take from this buffer.
a buffer consisting only of the first n elements of this buffer,
or else the whole buffer, if it has less than n elements.
Selects last n elements.
Selects last n elements.
the number of elements to take
a buffer consisting only of the last n elements of this buffer, or else the
whole buffer, if it has less than n elements.
Takes longest prefix of elements that satisfy a predicate.
Takes longest prefix of elements that satisfy a predicate.
the longest prefix of this buffer whose elements all satisfy
the predicate p.
The underlying collection seen as an instance of Buffer
The underlying collection seen as an instance of Buffer
[use case] Converts this buffer into another by copying all elements.
Converts this buffer into another by copying all elements.
The collection type to build.
a new collection containing all elements of this buffer.
[use case] Converts this buffer to an array.
Converts this buffer to an array.
an array containing all elements of this buffer.
An ClassTag must be available for the element type of this buffer.
Converts this buffer to a mutable buffer.
Converts this buffer to a mutable buffer.
a buffer containing all elements of this buffer.
A conversion from collections of type Repr to Buffer
A conversion from collections of type Repr to Buffer
Converts this buffer to an indexed sequence.
Converts this buffer to an indexed sequence.
an indexed sequence containing all elements of this buffer.
Converts this buffer to an iterable collection.
Converts this buffer to an iterable collection. Note that
the choice of target Iterable is lazy in this default implementation
as this TraversableOnce may be lazy and unevaluated (i.e. it may
be an iterator which is only traversable once).
an Iterable containing all elements of this buffer.
Returns an Iterator over the elements in this buffer.
Returns an Iterator over the elements in this buffer. Will return the same Iterator if this instance is already an Iterator.
an Iterator containing all elements of this buffer.
Converts this buffer to a list.
Converts this buffer to a list.
a list containing all elements of this buffer.
[use case] Converts this buffer to a map.
Converts this buffer to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
a map of type immutable.Map[T, U]
containing all key/value pairs of type (T, U) of this buffer.
Converts this buffer to a sequence.
Converts this buffer to a sequence.
Overridden for efficiency.
a sequence containing all elements of this buffer.
Converts this buffer to a set.
Converts this buffer to a set.
a set containing all elements of this buffer.
Converts this buffer to a stream.
Converts this buffer to a stream.
a stream containing all elements of this buffer.
Converts this buffer to a string.
Converts this buffer to a string.
a string representation of this collection. By default this
string consists of the stringPrefix of this buffer, followed
by all elements separated by commas and enclosed in parentheses.
Converts this buffer to an unspecified Traversable.
Converts this buffer to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
a Traversable containing all elements of this buffer.
Converts this buffer to a Vector.
Converts this buffer to a Vector.
a vector containing all elements of this buffer.
Applies a transformation function to all values contained in this sequence.
Applies a transformation function to all values contained in this sequence. The transformation function produces new values from existing elements.
the transformation to apply
the sequence itself.
Transposes this buffer of traversable collections into a buffer of buffers.
Transposes this buffer of traversable collections into a buffer of buffers.
the type of the elements of each traversable collection.
an implicit conversion which asserts that the
element type of this buffer is a Traversable.
a two-dimensional buffer of buffers which has as nth row the nth column of this buffer.
(Changed in version 2.9.0) transpose throws an IllegalArgumentException if collections are not uniformly sized.
if all collections in this buffer are not of the same size.
Removes the last n elements of this buffer.
Removes the last n elements of this buffer.
the number of elements to remove from the end of this buffer.
Removes the first n elements of this buffer.
Removes the first n elements of this buffer.
the number of elements to remove from the beginning of this buffer.
[use case] Produces a new sequence which contains all elements of this buffer and also all elements of a given sequence.
Produces a new sequence which contains all elements of this buffer and also all elements of
a given sequence. xs union ys is equivalent to xs ++ ys.
Another way to express this
is that xs union ys computes the order-presevring multi-set union of xs and ys.
union is hence a counter-part of diff and intersect which also work on multi-sets.
the sequence to add.
a new buffer which contains all elements of this buffer
followed by all elements of that.
Converts this buffer of pairs into two collections of the first and second half of each pair.
Converts this buffer of pairs into two collections of the first and second half of each pair.
the type of the first half of the element pairs
the type of the second half of the element pairs
an implicit conversion which asserts that the element type of this buffer is a pair.
a pair buffers, containing the first, respectively second half of each element pair of this buffer.
Converts this buffer of triples into three collections of the first, second, and third element of each triple.
Converts this buffer of triples into three collections of the first, second, and third element of each triple.
the type of the first member of the element triples
the type of the second member of the element triples
the type of the third member of the element triples
an implicit conversion which asserts that the element type of this buffer is a triple.
a triple buffers, containing the first, second, respectively third member of each element triple of this buffer.
[use case] A copy of this buffer with one single replaced element.
A copy of this buffer with one single replaced element.
the position of the replacement
the replacing element
a copy of this buffer with the element at position index replaced by elem.
Creates a non-strict view of a slice of this buffer.
Creates a non-strict view of a slice of this buffer.
Note: the difference between view and slice is that view produces
a view of the current buffer, whereas slice produces a new buffer.
Note: view(from, to) is equivalent to view.slice(from, to)
the index of the first element of the view
the index of the element following the view
a non-strict view of a slice of this buffer, starting at index from
and extending up to (but not including) index until.
Creates a non-strict view of this buffer.
Creates a non-strict view of this buffer.
a non-strict view of this buffer.
Creates a non-strict filter of this buffer.
Creates a non-strict filter of this buffer.
Note: the difference between c filter p and c withFilter p is that
the former creates a new collection, whereas the latter only
restricts the domain of subsequent map, flatMap, foreach,
and withFilter operations.
the predicate used to test elements.
an object of class WithFilter, which supports
map, flatMap, foreach, and withFilter operations.
All these operations apply to those elements of this buffer
which satisfy the predicate p.
[use case] Returns a buffer formed from this buffer and another iterable collection by combining corresponding elements in pairs.
Returns a buffer formed from this buffer and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new buffer containing pairs consisting of
corresponding elements of this buffer and that. The length
of the returned collection is the minimum of the lengths of this buffer and that.
[use case] Returns a buffer formed from this buffer and another iterable collection by combining corresponding elements in pairs.
Returns a buffer formed from this buffer and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this buffer is shorter than that.
the element to be used to fill up the result if that is shorter than this buffer.
a new buffer containing pairs consisting of
corresponding elements of this buffer and that. The length
of the returned collection is the maximum of the lengths of this buffer and that.
If this buffer is shorter than that, thisElem values are used to pad the result.
If that is shorter than this buffer, thatElem values are used to pad the result.
[use case] Zips this buffer with its indices.
Zips this buffer with its indices.
A new buffer containing pairs consisting of all elements of this
buffer paired with their index. Indices start at 0.
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
(buffer: MonadOps[A]).filter(p)
(buffer: MonadOps[A]).flatMap(f)
(buffer: MonadOps[A]).map(f)
(buffer: MonadOps[A]).withFilter(p)
Buffers are used to create sequences of elements incrementally by appending, prepending, or inserting new elements. It is also possible to access and modify elements in a random access fashion via the index of the element in the current sequence.
type of the elements contained in this buffer.
2.8
1