Package

org.scalatest

wordspec

Permalink

package wordspec

Classes and traits for ScalaTest's WordSpec style.

This package is released as the scalatest-wordspec module.

Source
package.scala
Linear Supertypes
AnyRef, Any
Ordering
  1. Alphabetic
  2. By Inheritance
Inherited
  1. wordspec
  2. AnyRef
  3. Any
  1. Hide All
  2. Show All
Visibility
  1. Public
  2. All

Type Members

  1. class AnyWordSpec extends AnyWordSpecLike

    Permalink

    Facilitates a “behavior-driven” style of development (BDD), in which tests are combined with text that specifies the behavior the tests verify.

    Facilitates a “behavior-driven” style of development (BDD), in which tests are combined with text that specifies the behavior the tests verify.

    Recommended Usage: For teams coming from specs or specs2, AnyWordSpec will feel familiar, and is often the most natural way to port specsN tests to ScalaTest. AnyWordSpec is very prescriptive in how text must be written, so a good fit for teams who want a high degree of discipline enforced upon their specification text.

    Class AnyWordSpec is so named because your specification text is structured by placing words after strings. Here's an example AnyWordSpec:

    package org.scalatest.examples.wordspec
    
    import org.scalatest._
    
    class SetSpec extends wordspec.AnyWordSpec {
    
      "A Set" when {
        "empty" should {
          "have size 0" in {
            assert(Set.empty.size === 0)
          }
    
          "produce NoSuchElementException when head is invoked" in {
            assertThrows[NoSuchElementException] {
              Set.empty.head
            }
          }
        }
      }
    }
    

    In a AnyWordSpec you write a one (or more) sentence specification for each bit of behavior you wish to specify and test. Each specification sentence has a "subject," which is sometimes called the system under test (or SUT). The subject is entity being specified and tested and also serves as the subject of the sentences you write for each test. A subject can be followed by one of three verbs, should, must, or can, and a block. Here are some examples:

    "A Stack" should {
      // ...
    }
    "An Account" must {
      // ...
    }
    "A ShippingManifest" can {
      // ...
    }
    

    You can describe a subject in varying situations by using a when clause. A when clause follows the subject and precedes a block. In the block after the when, you place strings that describe a situation or a state the subject may be in using a string, each followed by a verb. Here's an example:

    "A Stack" when {
      "empty" should {
        // ...
      }
      "non-empty" should {
        // ...
      }
      "full" should {
        // ...
      }
    }
    

    When you are ready to finish a sentence, you write a string followed by in and a block that contains the code of the test. Here's an example:

    import org.scalatest._
    
    class StackSpec extends wordspec.AnyWordSpec {
      "A Stack" when {
        "empty" should {
          "be empty" in {
            // ...
          }
          "complain on peek" in {
            // ...
          }
          "complain on pop" in {
            // ...
          }
        }
        "full" should {
          "be full" in {
            // ...
          }
          "complain on push" in {
            // ...
          }
        }
      }
    }
    

    Running the above StackSpec in the interpreter would yield:

    scala> org.scalatest.run(new StackSpec)
    StackSpec:
    A Stack
      when empty
      - should be empty
      - should complain on peek
      - should complain on pop
      when full
      - should be full
      - should complain on push
    

    Note that the output does not exactly match the input in an effort to maximize readability. Although the AnyWordSpec code is nested, which can help you eliminate any repeated phrases in the specification portion of your code, the output printed moves when and should down to the beginning of the next line.

    Sometimes you may wish to eliminate repeated phrases inside the block following a verb. Here's an example in which the phrase "provide an and/or operator, which" is repeated:

    import org.scalatest._
    
    class AndOrSpec extends wordspec.AnyWordSpec {
    
      "The ScalaTest Matchers DSL" should {
        "provide an and operator, which returns silently when evaluating true and true" in {}
        "provide an and operator, which throws a TestFailedException when evaluating true and false" in {}
        "provide an and operator, which throws a TestFailedException when evaluating false and true" in {}
        "provide an and operator, which throws a TestFailedException when evaluating false and false" in {}
        "provide an or operator, which returns silently when evaluating true or true" in {}
        "provide an or operator, which returns silently when evaluating true or false" in {}
        "provide an or operator, which returns silently when evaluating false or true" in {}
        "provide an or operator, which throws a TestFailedException when evaluating false or false" in {}
      }
    }
    

    In such situations you can place which clauses inside the verb clause, like this:

    import org.scalatest._
    
    class AndOrSpec extends wordspec.AnyWordSpec {
    
      "The ScalaTest Matchers DSL" should {
        "provide an and operator," which {
          "returns silently when evaluating true and true" in {}
          "throws a TestFailedException when evaluating true and false" in {}
          "throws a TestFailedException when evaluating false and true" in {}
          "throws a TestFailedException when evaluating false and false" in {}
        }
        "provide an or operator," which {
          "returns silently when evaluating true or true" in {}
          "returns silently when evaluating true or false" in {}
          "returns silently when evaluating false or true" in {}
          "throws a TestFailedException when evaluating false or false" in {}
        }
      }
    }
    

    Running the above AndOrSpec in the interpreter would yield:

    scala> org.scalatest.run(new AndOrSpec)
    AndOrSpec:
    The ScalaTest Matchers DSL
      should provide an and operator, which
      - returns silently when evaluating true and true
      - throws a TestFailedException when evaluating true and false
      - throws a TestFailedException when evaluating false and true
      - throws a TestFailedException when evaluating false and false
      should provide an or operator, which
      - returns silently when evaluating true or true
      - returns silently when evaluating true or false
      - returns silently when evaluating false or true
      - throws a TestFailedException when evaluating false or false
    

    Note that unlike when and should/must/can, a which appears in the output right where you put it in the input, at the end of the line, to maximize readability.

    If a word or phrase is repeated at the beginning of each string contained in a block, you can eliminate that repetition by using an after word. An after word is a word or phrase that you can place after when, a verb, or which. For example, in the previous AnyWordSpec, the word "provide" is repeated at the beginning of each string inside the should block. You can factor out this duplication like this:

    import org.scalatest._
    
    class AndOrSpec extends wordspec.AnyWordSpec {
    
       def provide = afterWord("provide")
    
      "The ScalaTest Matchers DSL" should provide {
        "an and operator," which {
          "returns silently when evaluating true and true" in {}
          "throws a TestFailedException when evaluating true and false" in {}
          "that throws a TestFailedException when evaluating false and true" in {}
          "throws a TestFailedException when evaluating false and false" in {}
        }
        "an or operator," which {
          "returns silently when evaluating true or true" in {}
          "returns silently when evaluating true or false" in {}
          "returns silently when evaluating false or true" in {}
          "throws a TestFailedException when evaluating false or false" in {}
        }
      }
    }
    

    Running the above version of AndOrSpec with the provide after word in the interpreter would give you:

    scala> org.scalatest.run(new AndOrSpec)
    AndOrSpec:
    The ScalaTest Matchers DSL
      should provide
        an and operator, which
        - returns silently when evaluating true and true
        - throws a TestFailedException when evaluating true and false
        - that throws a TestFailedException when evaluating false and true
        - throws a TestFailedException when evaluating false and false
        an or operator, which
        - returns silently when evaluating true or true
        - returns silently when evaluating true or false
        - returns silently when evaluating false or true
        - throws a TestFailedException when evaluating false or false
    

    Once you've defined an after word, you can place it after when, a verb (should, must, or can), or which. (You can't place one after in or is, the words that introduce a test.) Here's an example that has after words used in all three places:

    import org.scalatest._
    
    class ScalaTestGUISpec extends wordspec.AnyWordSpec {
    
      def theUser = afterWord("the user")
      def display = afterWord("display")
      def is = afterWord("is")
    
      "The ScalaTest GUI" when theUser {
        "clicks on an event report in the list box" should display {
          "a blue background in the clicked-on row in the list box" in {}
          "the details for the event in the details area" in {}
          "a rerun button," which is {
            "enabled if the clicked-on event is rerunnable" in {}
            "disabled if the clicked-on event is not rerunnable" in {}
          }
        }
      }
    }
    

    Running the previous AnyWordSpec in the Scala interpreter would yield:

    scala> org.scalatest.run(new ScalaTestGUISpec)
    ScalaTestGUISpec:
    The ScalaTest GUI
      when the user clicks on an event report in the list box
        should display
        - a blue background in the clicked-on row in the list box
        - the details for the event in the details area
          a rerun button, which is
          - enabled if the clicked-on event is rerunnable
          - disabled if the clicked-on event is not rerunnable
    

    In case when you need to use different verb for a same subject, you can use it or they shorthand to avoid subject duplication:

    "A Stack" when {
      // ...
    }
    
    it should {
      // ...
    }
    

    A AnyWordSpec's lifecycle has two phases: the registration phase and the ready phase. It starts in registration phase and enters ready phase the first time run is called on it. It then remains in ready phase for the remainder of its lifetime.

    Tests can only be registered while the AnyWordSpec is in its registration phase. Any attempt to register a test after the AnyWordSpec has entered its ready phase, i.e., after run has been invoked on the AnyWordSpec, will be met with a thrown TestRegistrationClosedException. The recommended style of using AnyWordSpec is to register tests during object construction as is done in all the examples shown here. If you keep to the recommended style, you should never see a TestRegistrationClosedException.

    Note: Class AnyWordSpec is in part inspired by class org.specs.Specification, designed by Eric Torreborre for the specs framework.

    Ignored tests

    To support the common use case of temporarily disabling a test, with the good intention of resurrecting the test at a later time, AnyWordSpec adds a method ignore to strings that can be used instead of in to register a test. For example, to temporarily disable the test with the name "A Stack should pop values in last-in-first-out order", just change “in” into “ignore,” like this:

    package org.scalatest.examples.wordspec.ignore
    
    import org.scalatest._
    
    class SetSpec extends wordspec.AnyWordSpec {
    
      "A Set" when {
        "empty" should {
          "have size 0" ignore {
            assert(Set.empty.size === 0)
          }
    
          "produce NoSuchElementException when head is invoked" in {
            assertThrows[NoSuchElementException] {
              Set.empty.head
            }
          }
        }
      }
    }
    

    If you run this version of SetSpec with:

    scala> org.scalatest.run(new SetSpec)
    

    It will run only the second test and report that the first test was ignored:

    A Set
      when empty
      - should have size 0 !!! IGNORED !!!
      - should should produce NoSuchElementException when head is invoked
    

    If you wish to temporarily ignore an entire suite of tests, you can (on the JVM, not Scala.js) annotate the test class with @Ignore, like this:

    package org.scalatest.examples.wordspec.ignoreall
    
    import org.scalatest._
    
    @Ignore
    class SetSpec extends wordspec.AnyWordSpec {
    
      "A Set" when {
        "empty" should {
          "have size 0" in {
            assert(Set.empty.size === 0)
          }
    
          "produce NoSuchElementException when head is invoked" in {
            assertThrows[NoSuchElementException] {
              Set.empty.head
            }
          }
        }
      }
    }
    

    When you mark a test class with a tag annotation, ScalaTest will mark each test defined in that class with that tag. Thus, marking the SetSpec in the above example with the @Ignore tag annotation means that both tests in the class will be ignored. If you run the above SetSpec in the Scala interpreter, you'll see:

    scala> org.scalatest.run(new SetSpec)
    SetSpec:
    A Set
      when empty
      - should have size 0 !!! IGNORED !!!
      - should produce NoSuchElementException when head is invoked !!! IGNORED !!!
    

    Note that marking a test class as ignored won't prevent it from being discovered by ScalaTest. Ignored classes will be discovered and run, and all their tests will be reported as ignored. This is intended to keep the ignored class visible, to encourage the developers to eventually fix and “un-ignore” it. If you want to prevent a class from being discovered at all (on the JVM, not Scala.js), use the DoNotDiscover annotation instead.

    Informers

    One of the parameters to AnyWordSpec's run method is a Reporter, which will collect and report information about the running suite of tests. Information about suites and tests that were run, whether tests succeeded or failed, and tests that were ignored will be passed to the Reporter as the suite runs. Most often the reporting done by default by AnyWordSpec's methods will be sufficient, but occasionally you may wish to provide custom information to the Reporter from a test. For this purpose, an Informer that will forward information to the current Reporter is provided via the info parameterless method. You can pass the extra information to the Informer via its apply method. The Informer will then pass the information to the Reporter via an InfoProvided event.

    One use case for the Informer is to pass more information about a specification to the reporter. For example, the GivenWhenThen trait provides methods that use the implicit info provided by WordSpec to pass such information to the reporter. Here's an example:

    package org.scalatest.examples.wordspec.info
    
    import collection.mutable
    import org.scalatest._
    
    class SetSpec extends wordspec.AnyWordSpec with GivenWhenThen {
    
      "A mutable Set" should {
        "allow an element to be added" in {
          Given("an empty mutable Set")
          val set = mutable.Set.empty[String]
    
          When("an element is added")
          set += "clarity"
    
          Then("the Set should have size 1")
          assert(set.size === 1)
    
          And("the Set should contain the added element")
          assert(set.contains("clarity"))
    
          info("That's all folks!")
        }
      }
    }
    

    If you run this AnyWordSpec from the interpreter, you will see the following output:

    scala> org.scalatest.run(new SetSpec)
    A mutable Set
    - should allow an element to be added
      + Given an empty mutable Set
      + When an element is added
      + Then the Set should have size 1
      + And the Set should contain the added element
      + That's all folks!
    

    Documenters

    AnyWordSpec also provides a markup method that returns a Documenter, which allows you to send to the Reporter text formatted in Markdown syntax. You can pass the extra information to the Documenter via its apply method. The Documenter will then pass the information to the Reporter via an MarkupProvided event.

    Here's an example AnyWordSpec that uses markup:

    package org.scalatest.examples.wordspec.markup
    
    import collection.mutable
    import org.scalatest._
    
    class SetSpec extends wordspec.AnyWordSpec with GivenWhenThen {
    
      markup { """
    
    Mutable Set
    -----------
    
    A set is a collection that contains no duplicate elements.
    
    To implement a concrete mutable set, you need to provide implementations
    of the following methods:
    
        def contains(elem: A): Boolean
        def iterator: Iterator[A]
        def += (elem: A): this.type
        def -= (elem: A): this.type
    
    If you wish that methods like `take`,
    `drop`, `filter` return the same kind of set,
    you should also override:
    
        def empty: This
    
    It is also good idea to override methods `foreach` and
    `size` for efficiency.
    
      """ }
    
      "A mutable Set" should {
        "allow an element to be added" in {
          Given("an empty mutable Set")
          val set = mutable.Set.empty[String]
    
          When("an element is added")
          set += "clarity"
    
          Then("the Set should have size 1")
          assert(set.size === 1)
    
          And("the Set should contain the added element")
          assert(set.contains("clarity"))
    
          markup("This test finished with a **bold** statement!")
        }
      }
    }
    

    Although all of ScalaTest's built-in reporters will display the markup text in some form, the HTML reporter will format the markup information into HTML. Thus, the main purpose of markup is to add nicely formatted text to HTML reports. Here's what the above SetSpec would look like in the HTML reporter:

    Notifiers and alerters

    ScalaTest records text passed to info and markup during tests, and sends the recorded text in the recordedEvents field of test completion events like TestSucceeded and TestFailed. This allows string reporters (like the standard out reporter) to show info and markup text after the test name in a color determined by the outcome of the test. For example, if the test fails, string reporters will show the info and markup text in red. If a test succeeds, string reporters will show the info and markup text in green. While this approach helps the readability of reports, it means that you can't use info to get status updates from long running tests.

    To get immediate (i.e., non-recorded) notifications from tests, you can use note (a Notifier) and alert (an Alerter). Here's an example showing the differences:

    package org.scalatest.examples.wordspec.note
    
    import collection.mutable
    import org.scalatest._
    
    class SetSpec extends wordspec.AnyWordSpec {
    
      "A mutable Set" should {
        "allow an element to be added" in {
    
          info("info is recorded")
          markup("markup is *also* recorded")
          note("notes are sent immediately")
          alert("alerts are also sent immediately")
    
          val set = mutable.Set.empty[String]
          set += "clarity"
          assert(set.size === 1)
          assert(set.contains("clarity"))
        }
      }
    }
    

    Because note and alert information is sent immediately, it will appear before the test name in string reporters, and its color will be unrelated to the ultimate outcome of the test: note text will always appear in green, alert text will always appear in yellow. Here's an example:

    scala> org.scalatest.run(new SetSpec)
    SetSpec:
    A mutable Set
      + notes are sent immediately
      + alerts are also sent immediately
    - should allow an element to be added
      + info is recorded
      + markup is *also* recorded
    

    Another example is slowpoke notifications. If you find a test is taking a long time to complete, but you're not sure which test, you can enable slowpoke notifications. ScalaTest will use an Alerter to fire an event whenever a test has been running longer than a specified amount of time.

    In summary, use info and markup for text that should form part of the specification output. Use note and alert to send status notifications. (Because the HTML reporter is intended to produce a readable, printable specification, info and markup text will appear in the HTML report, but note and alert text will not.)

    Pending tests

    A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later.

    To support this style of testing, a test can be given a name that specifies one bit of behavior required by the system being tested. The test can also include some code that sends more information about the behavior to the reporter when the tests run. At the end of the test, it can call method pending, which will cause it to complete abruptly with TestPendingException.

    Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information sent to the reporter when running the test can appear in the report of a test run. (In other words, the code of a pending test is executed just like any other test.) However, because the test completes abruptly with TestPendingException, the test will be reported as pending, to indicate the actual test, and possibly the functionality it is intended to test, has not yet been implemented. You can mark tests as pending in a AnyWordSpec like this:

    package org.scalatest.examples.wordspec.pending
    
    import org.scalatest._
    
    class SetSpec extends wordspec.AnyWordSpec {
    
      "A Set" when {
        "empty" should {
          "have size 0" in (pending)
    
          "produce NoSuchElementException when head is invoked" in {
            assertThrows[NoSuchElementException] {
              Set.empty.head
            }
          }
        }
      }
    }
    

    If you run this version of SetSpec with:

    scala> org.scalatest.run(new SetSpec)
    

    It will run both tests but report that should have size 0 is pending. You'll see:

    A Set
      when empty
      - should have size 0 (pending)
      - should produce NoSuchElementException when head is invoked
    

    One difference between an ignored test and a pending one is that an ignored test is intended to be used during a significant refactorings of the code under test, when tests break and you don't want to spend the time to fix all of them immediately. You can mark some of those broken tests as ignored temporarily, so that you can focus the red bar on just failing tests you actually want to fix immediately. Later you can go back and fix the ignored tests. In other words, by ignoring some failing tests temporarily, you can more easily notice failed tests that you actually want to fix. By contrast, a pending test is intended to be used before a test and/or the code under test is written. Pending indicates you've decided to write a test for a bit of behavior, but either you haven't written the test yet, or have only written part of it, or perhaps you've written the test but don't want to implement the behavior it tests until after you've implemented a different bit of behavior you realized you need first. Thus ignored tests are designed to facilitate refactoring of existing code whereas pending tests are designed to facilitate the creation of new code.

    One other difference between ignored and pending tests is that ignored tests are implemented as a test tag that is excluded by default. Thus an ignored test is never executed. By contrast, a pending test is implemented as a test that throws TestPendingException (which is what calling the pending method does). Thus the body of pending tests are executed up until they throw TestPendingException. The reason for this difference is that it enables your unfinished test to send InfoProvided messages to the reporter before it completes abruptly with TestPendingException, as shown in the previous example on Informers that used the GivenWhenThen trait. For example, the following snippet in a WordSpec:

     "The Scala language" should {
        "add correctly" in {
          Given("two integers")
          When("they are added")
          Then("the result is the sum of the two numbers")
          pending
        }
        // ...
    

    Would yield the following output when run in the interpreter:

    The Scala language
    - should add correctly (pending)
      + Given two integers
      + When they are added
      + Then the result is the sum of the two numbers
    

    Tagging tests

    A AnyWordSpec's tests may be classified into groups by tagging them with string names. As with any suite, when executing a AnyWordSpec, groups of tests can optionally be included and/or excluded. To tag a AnyWordSpec's tests, you pass objects that extend class org.scalatest.Tag to methods that register tests. Class Tag takes one parameter, a string name. If you have created tag annotation interfaces as described in the Tag documentation, then you will probably want to use tag names on your test functions that match. To do so, simply pass the fully qualified names of the tag interfaces to the Tag constructor. For example, if you've defined a tag annotation interface with fully qualified name, com.mycompany.tags.DbTest, then you could create a matching tag for AnyWordSpecs like this:

    package org.scalatest.examples.wordspec.tagging
    
    import org.scalatest.Tag
    
    object DbTest extends Tag("com.mycompany.tags.DbTest")
    

    Given these definitions, you could place AnyWordSpec tests into groups with tags like this:

    import org.scalatest._
    import org.scalatest.tagobjects.Slow
    
    class SetSpec extends wordspec.AnyWordSpec {
    
      "A Set" when {
        "empty" should {
          "have size 0" taggedAs(Slow) in {
            assert(Set.empty.size === 0)
          }
    
          "produce NoSuchElementException when head is invoked" taggedAs(Slow, DbTest) in {
            assertThrows[NoSuchElementException] {
              Set.empty.head
            }
          }
        }
      }
    }
    

    This code marks both tests with the org.scalatest.tags.Slow tag, and the second test with the com.mycompany.tags.DbTest tag.

    The run method takes a Filter, whose constructor takes an optional Set[String] called tagsToInclude and a Set[String] called tagsToExclude. If tagsToInclude is None, all tests will be run except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is defined, only tests belonging to tags mentioned in the tagsToInclude set, and not mentioned in tagsToExclude, will be run.

    It is recommended, though not required, that you create a corresponding tag annotation when you create a Tag object. A tag annotation (on the JVM, not Scala.js) allows you to tag all the tests of a WordSpec in one stroke by annotating the class. For more information and examples, see the documentation for class Tag. On Scala.js, to tag all tests of a suite, you'll need to tag each test individually at the test site.

    Shared fixtures

    A test fixture is composed of the objects and other artifacts (files, sockets, database connections, etc.) tests use to do their work. When multiple tests need to work with the same fixtures, it is important to try and avoid duplicating the fixture code across those tests. The more code duplication you have in your tests, the greater drag the tests will have on refactoring the actual production code.

    ScalaTest recommends three techniques to eliminate such code duplication:

    • Refactor using Scala
    • Override withFixture
    • Mix in a before-and-after trait

    Each technique is geared towards helping you reduce code duplication without introducing instance vars, shared mutable objects, or other dependencies between tests. Eliminating shared mutable state across tests will make your test code easier to reason about and more amenable for parallel test execution.

    The following sections describe these techniques, including explaining the recommended usage for each. But first, here's a table summarizing the options:

    Refactor using Scala when different tests need different fixtures.
    get-fixture methods The extract method refactor helps you create a fresh instances of mutable fixture objects in each test that needs them, but doesn't help you clean them up when you're done.
    fixture-context objects By placing fixture methods and fields into traits, you can easily give each test just the newly created fixtures it needs by mixing together traits. Use this technique when you need different combinations of mutable fixture objects in different tests, and don't need to clean up after.
    loan-fixture methods Factor out dupicate code with the loan pattern when different tests need different fixtures that must be cleaned up afterwards.
    Override withFixture when most or all tests need the same fixture.
    withFixture(NoArgTest) The recommended default approach when most or all tests need the same fixture treatment. This general technique allows you, for example, to perform side effects at the beginning and end of all or most tests, transform the outcome of tests, retry tests, make decisions based on test names, tags, or other test data. Use this technique unless:
    Different tests need different fixtures (refactor using Scala instead)
    An exception in fixture code should abort the suite, not fail the test (use a before-and-after trait instead)
    You have objects to pass into tests (override withFixture(OneArgTest) instead)
    withFixture(OneArgTest) Use when you want to pass the same fixture object or objects as a parameter into all or most tests.
    Mix in a before-and-after trait when you want an aborted suite, not a failed test, if the fixture code fails.
    BeforeAndAfter Use this boilerplate-buster when you need to perform the same side-effects before and/or after tests, rather than at the beginning or end of tests.
    BeforeAndAfterEach Use when you want to stack traits that perform the same side-effects before and/or after tests, rather than at the beginning or end of tests.

    Calling get-fixture methods

    If you need to create the same mutable fixture objects in multiple tests, and don't need to clean them up after using them, the simplest approach is to write one or more get-fixture methods. A get-fixture method returns a new instance of a needed fixture object (or an holder object containing multiple fixture objects) each time it is called. You can call a get-fixture method at the beginning of each test that needs the fixture, storing the returned object or objects in local variables. Here's an example:

    package org.scalatest.examples.wordspec.getfixture
    
    import org.scalatest._
    import collection.mutable.ListBuffer
    
    class ExampleSpec extends wordspec.AnyWordSpec {
    
      class Fixture {
        val builder = new StringBuilder("ScalaTest is ")
        val buffer = new ListBuffer[String]
      }
    
      def fixture = new Fixture
    
      "Testing" should {
        "be easy" in {
          val f = fixture
          f.builder.append("easy!")
          assert(f.builder.toString === "ScalaTest is easy!")
          assert(f.buffer.isEmpty)
          f.buffer += "sweet"
        }
    
        "be fun" in {
          val f = fixture
          f.builder.append("fun!")
          assert(f.builder.toString === "ScalaTest is fun!")
          assert(f.buffer.isEmpty)
        }
      }
    }
    

    The “f.” in front of each use of a fixture object provides a visual indication of which objects are part of the fixture, but if you prefer, you can import the the members with “import f._” and use the names directly.

    If you need to configure fixture objects differently in different tests, you can pass configuration into the get-fixture method. For example, you could pass in an initial value for a mutable fixture object as a parameter to the get-fixture method.

    Instantiating fixture-context objects

    An alternate technique that is especially useful when different tests need different combinations of fixture objects is to define the fixture objects as instance variables of fixture-context objects whose instantiation forms the body of tests. Like get-fixture methods, fixture-context objects are only appropriate if you don't need to clean up the fixtures after using them.

    To use this technique, you define instance variables intialized with fixture objects in traits and/or classes, then in each test instantiate an object that contains just the fixture objects needed by the test. Traits allow you to mix together just the fixture objects needed by each test, whereas classes allow you to pass data in via a constructor to configure the fixture objects. Here's an example in which fixture objects are partitioned into two traits and each test just mixes together the traits it needs:

    package org.scalatest.examples.wordspec.fixturecontext
    
    import collection.mutable.ListBuffer
    import org.scalatest._
    
    class ExampleSpec extends wordspec.AnyWordSpec {
    
      trait Builder {
        val builder = new StringBuilder("ScalaTest is ")
      }
    
      trait Buffer {
        val buffer = ListBuffer("ScalaTest", "is")
      }
    
      "Testing" should {
        // This test needs the StringBuilder fixture
        "be productive" in new Builder {
          builder.append("productive!")
          assert(builder.toString === "ScalaTest is productive!")
        }
      }
    
      "Test code" should {
        // This test needs the ListBuffer[String] fixture
        "be readable" in new Buffer {
          buffer += ("readable!")
          assert(buffer === List("ScalaTest", "is", "readable!"))
        }
    
        // This test needs both the StringBuilder and ListBuffer
        "be clear and concise" in new Builder with Buffer {
          builder.append("clear!")
          buffer += ("concise!")
          assert(builder.toString === "ScalaTest is clear!")
          assert(buffer === List("ScalaTest", "is", "concise!"))
        }
      }
    }
    

    Overriding withFixture(NoArgTest)

    Although the get-fixture method and fixture-context object approaches take care of setting up a fixture at the beginning of each test, they don't address the problem of cleaning up a fixture at the end of the test. If you just need to perform a side-effect at the beginning or end of a test, and don't need to actually pass any fixture objects into the test, you can override withFixture(NoArgTest), one of ScalaTest's lifecycle methods defined in trait Suite.

    Trait Suite's implementation of runTest passes a no-arg test function to withFixture(NoArgTest). It is withFixture's responsibility to invoke that test function. Suite's implementation of withFixture simply invokes the function, like this:

    // Default implementation in trait Suite
    protected def withFixture(test: NoArgTest) = {
      test()
    }
    

    You can, therefore, override withFixture to perform setup before and/or cleanup after invoking the test function. If you have cleanup to perform, you should invoke the test function inside a try block and perform the cleanup in a finally clause, in case an exception propagates back through withFixture. (If a test fails because of an exception, the test function invoked by withFixture will result in a Failed wrapping the exception. Nevertheless, best practice is to perform cleanup in a finally clause just in case an exception occurs.)

    The withFixture method is designed to be stacked, and to enable this, you should always call the super implementation of withFixture, and let it invoke the test function rather than invoking the test function directly. Instead of writing “test()”, you should write “super.withFixture(test)”, like this:

    // Your implementation
    override def withFixture(test: NoArgTest) = {
      // Perform setup
      try super.withFixture(test) // Invoke the test function
      finally {
        // Perform cleanup
      }
    }
    

    Here's an example in which withFixture(NoArgTest) is used to take a snapshot of the working directory if a test fails, and send that information to the reporter:

    package org.scalatest.examples.wordspec.noargtest
    
    import java.io.File
    import org.scalatest._
    
    class ExampleSpec extends wordspec.AnyWordSpec {
    
      override def withFixture(test: NoArgTest) = {
    
        super.withFixture(test) match {
          case failed: Failed =>
            val currDir = new File(".")
            val fileNames = currDir.list()
            info("Dir snapshot: " + fileNames.mkString(", "))
            failed
          case other => other
        }
      }
    
      "This test" should {
        "succeed" in {
          assert(1 + 1 === 2)
        }
    
        "fail" in {
          assert(1 + 1 === 3)
        }
      }
    }
    

    Running this version of ExampleSuite in the interpreter in a directory with two files, hello.txt and world.txt would give the following output:

    scala> org.scalatest.run(new ExampleSuite)
    ExampleSuite:
    This test
    - should succeed
    - should fail *** FAILED ***
      2 did not equal 3 (:33)
      + Dir snapshot: hello.txt, world.txt 
    

    Note that the NoArgTest passed to withFixture, in addition to an apply method that executes the test, also includes the test name and the config map passed to runTest. Thus you can also use the test name and configuration objects in your withFixture implementation.

    Calling loan-fixture methods

    If you need to both pass a fixture object into a test and perform cleanup at the end of the test, you'll need to use the loan pattern. If different tests need different fixtures that require cleanup, you can implement the loan pattern directly by writing loan-fixture methods. A loan-fixture method takes a function whose body forms part or all of a test's code. It creates a fixture, passes it to the test code by invoking the function, then cleans up the fixture after the function returns.

    The following example shows three tests that use two fixtures, a database and a file. Both require cleanup after, so each is provided via a loan-fixture method. (In this example, the database is simulated with a StringBuffer.)

    import java.util.concurrent.ConcurrentHashMap
    
    object DbServer { // Simulating a database server
      type Db = StringBuffer
      private val databases = new ConcurrentHashMap[String, Db]
      def createDb(name: String): Db = {
        val db = new StringBuffer
        databases.put(name, db)
        db
      }
      def removeDb(name: String) {
        databases.remove(name)
      }
    }
    
    import org.scalatest._
    import DbServer._
    import java.util.UUID.randomUUID
    import java.io._
    
    class ExampleSpec extends wordspec.AnyWordSpec {
    
      def withDatabase(testCode: Db => Any) {
        val dbName = randomUUID.toString
        val db = createDb(dbName) // create the fixture
        try {
          db.append("ScalaTest is ") // perform setup
          testCode(db) // "loan" the fixture to the test
        }
        finally removeDb(dbName) // clean up the fixture
      }
    
      def withFile(testCode: (File, FileWriter) => Any) {
        val file = File.createTempFile("hello", "world") // create the fixture
        val writer = new FileWriter(file)
        try {
          writer.write("ScalaTest is ") // set up the fixture
          testCode(file, writer) // "loan" the fixture to the test
        }
        finally writer.close() // clean up the fixture
      }
    
      "Testing" should {
        // This test needs the file fixture
        "be productive" in withFile { (file, writer) =>
          writer.write("productive!")
          writer.flush()
          assert(file.length === 24)
        }
      }
    
      "Test code" should {
        // This test needs the database fixture
        "be readable" in withDatabase { db =>
          db.append("readable!")
          assert(db.toString === "ScalaTest is readable!")
        }
    
        // This test needs both the file and the database
        "be clear and concise" in withDatabase { db =>
          withFile { (file, writer) => // loan-fixture methods compose
            db.append("clear!")
            writer.write("concise!")
            writer.flush()
            assert(db.toString === "ScalaTest is clear!")
            assert(file.length === 21)
          }
        }
      }
    }
    

    As demonstrated by the last test, loan-fixture methods compose. Not only do loan-fixture methods allow you to give each test the fixture it needs, they allow you to give a test multiple fixtures and clean everything up afterwards.

    Also demonstrated in this example is the technique of giving each test its own "fixture sandbox" to play in. When your fixtures involve external side-effects, like creating files or databases, it is a good idea to give each file or database a unique name as is done in this example. This keeps tests completely isolated, allowing you to run them in parallel if desired.

    Overriding withFixture(OneArgTest)

    If all or most tests need the same fixture, you can avoid some of the boilerplate of the loan-fixture method approach by using a fixture.WordSpec and overriding withFixture(OneArgTest). Each test in a FixtureAnyWordSpec takes a fixture as a parameter, allowing you to pass the fixture into the test. You must indicate the type of the fixture parameter by specifying FixtureParam, and implement a withFixture method that takes a OneArgTest. This withFixture method is responsible for invoking the one-arg test function, so you can perform fixture set up before, and clean up after, invoking and passing the fixture into the test function.

    To enable the stacking of traits that define withFixture(NoArgTest), it is a good idea to let withFixture(NoArgTest) invoke the test function instead of invoking the test function directly. To do so, you'll need to convert the OneArgTest to a NoArgTest. You can do that by passing the fixture object to the toNoArgTest method of OneArgTest. Instead of writing “test(theFixture)”, you'd delegate responsibility for invoking the test function to the withFixture(NoArgTest) method of the same instance by writing:

    withFixture(test.toNoArgTest(theFixture))
    

    Here's a complete example:

    package org.scalatest.examples.wordspec.oneargtest
    
    import org.scalatest.wordspec
    import java.io._
    
    class ExampleSpec extends wordspec.FixtureAnyWordSpec {
    
      case class FixtureParam(file: File, writer: FileWriter)
    
      def withFixture(test: OneArgTest) = {
        val file = File.createTempFile("hello", "world") // create the fixture
        val writer = new FileWriter(file)
        val theFixture = FixtureParam(file, writer)
    
        try {
          writer.write("ScalaTest is ") // set up the fixture
          withFixture(test.toNoArgTest(theFixture)) // "loan" the fixture to the test
        }
        finally writer.close() // clean up the fixture
      }
    
      "Testing" should {
        "be easy" in { f =>
          f.writer.write("easy!")
          f.writer.flush()
          assert(f.file.length === 18)
        }
    
        "be fun" in { f =>
          f.writer.write("fun!")
          f.writer.flush()
          assert(f.file.length === 17)
        }
      }
    }
    

    In this example, the tests actually required two fixture objects, a File and a FileWriter. In such situations you can simply define the FixtureParam type to be a tuple containing the objects, or as is done in this example, a case class containing the objects. For more information on the withFixture(OneArgTest) technique, see the documentation for fixture.WordSpec.

    Mixing in BeforeAndAfter

    In all the shared fixture examples shown so far, the activities of creating, setting up, and cleaning up the fixture objects have been performed during the test. This means that if an exception occurs during any of these activities, it will be reported as a test failure. Sometimes, however, you may want setup to happen before the test starts, and cleanup after the test has completed, so that if an exception occurs during setup or cleanup, the entire suite aborts and no more tests are attempted. The simplest way to accomplish this in ScalaTest is to mix in trait BeforeAndAfter. With this trait you can denote a bit of code to run before each test with before and/or after each test each test with after, like this:

    package org.scalatest.examples.wordspec.beforeandafter
    
    import org.scalatest._
    import collection.mutable.ListBuffer
    
    class ExampleSpec extends wordspec.AnyWordSpec with BeforeAndAfter {
    
      val builder = new StringBuilder
      val buffer = new ListBuffer[String]
    
      before {
        builder.append("ScalaTest is ")
      }
    
      after {
        builder.clear()
        buffer.clear()
      }
    
      "Testing" should {
        "be easy" in {
          builder.append("easy!")
          assert(builder.toString === "ScalaTest is easy!")
          assert(buffer.isEmpty)
          buffer += "sweet"
        }
    
        "be fun" in {
          builder.append("fun!")
          assert(builder.toString === "ScalaTest is fun!")
          assert(buffer.isEmpty)
        }
      }
    }
    

    Note that the only way before and after code can communicate with test code is via some side-effecting mechanism, commonly by reassigning instance vars or by changing the state of mutable objects held from instance vals (as in this example). If using instance vars or mutable objects held from instance vals you wouldn't be able to run tests in parallel in the same instance of the test class (on the JVM, not Scala.js) unless you synchronized access to the shared, mutable state. This is why ScalaTest's ParallelTestExecution trait extends OneInstancePerTest. By running each test in its own instance of the class, each test has its own copy of the instance variables, so you don't need to synchronize. If you mixed ParallelTestExecution into the ExampleSuite above, the tests would run in parallel just fine without any synchronization needed on the mutable StringBuilder and ListBuffer[String] objects.

    Although BeforeAndAfter provides a minimal-boilerplate way to execute code before and after tests, it isn't designed to enable stackable traits, because the order of execution would be non-obvious. If you want to factor out before and after code that is common to multiple test suites, you should use trait BeforeAndAfterEach instead, as shown later in the next section, composing fixtures by stacking traits.

    Composing fixtures by stacking traits

    In larger projects, teams often end up with several different fixtures that test classes need in different combinations, and possibly initialized (and cleaned up) in different orders. A good way to accomplish this in ScalaTest is to factor the individual fixtures into traits that can be composed using the stackable trait pattern. This can be done, for example, by placing withFixture methods in several traits, each of which call super.withFixture. Here's an example in which the StringBuilder and ListBuffer[String] fixtures used in the previous examples have been factored out into two stackable fixture traits named Builder and Buffer:

    package org.scalatest.examples.wordspec.composingwithfixture
    
    import org.scalatest._
    import collection.mutable.ListBuffer
    
    trait Builder extends TestSuiteMixin { this: TestSuite =>
    
      val builder = new StringBuilder
    
      abstract override def withFixture(test: NoArgTest) = {
        builder.append("ScalaTest is ")
        try super.withFixture(test) // To be stackable, must call super.withFixture
        finally builder.clear()
      }
    }
    
    trait Buffer extends TestSuiteMixin { this: TestSuite =>
    
      val buffer = new ListBuffer[String]
    
      abstract override def withFixture(test: NoArgTest) = {
        try super.withFixture(test) // To be stackable, must call super.withFixture
        finally buffer.clear()
      }
    }
    
    class ExampleSpec extends wordspec.AnyWordSpec with Builder with Buffer {
    
      "Testing" should {
        "be easy" in {
          builder.append("easy!")
          assert(builder.toString === "ScalaTest is easy!")
          assert(buffer.isEmpty)
          buffer += "sweet"
        }
    
        "be fun" in {
          builder.append("fun!")
          assert(builder.toString === "ScalaTest is fun!")
          assert(buffer.isEmpty)
          buffer += "clear"
        }
      }
    }
    

    By mixing in both the Builder and Buffer traits, ExampleSpec gets both fixtures, which will be initialized before each test and cleaned up after. The order the traits are mixed together determines the order of execution. In this case, Builder is “super” to Buffer. If you wanted Buffer to be “super” to Builder, you need only switch the order you mix them together, like this:

    class Example2Spec extends wordspec.AnyWordSpec with Buffer with Builder
    

    And if you only need one fixture you mix in only that trait:

    class Example3Spec extends wordspec.AnyWordSpec with Builder
    

    Another way to create stackable fixture traits is by extending the BeforeAndAfterEach and/or BeforeAndAfterAll traits. BeforeAndAfterEach has a beforeEach method that will be run before each test (like JUnit's setUp), and an afterEach method that will be run after (like JUnit's tearDown). Similarly, BeforeAndAfterAll has a beforeAll method that will be run before all tests, and an afterAll method that will be run after all tests. Here's what the previously shown example would look like if it were rewritten to use the BeforeAndAfterEach methods instead of withFixture:

    package org.scalatest.examples.wordspec.composingbeforeandaftereach
    
    import org.scalatest._
    import org.scalatest.BeforeAndAfterEach
    import collection.mutable.ListBuffer
    
    trait Builder extends BeforeAndAfterEach { this: Suite =>
    
      val builder = new StringBuilder
    
      override def beforeEach() {
        builder.append("ScalaTest is ")
        super.beforeEach() // To be stackable, must call super.beforeEach
      }
    
      override def afterEach() {
        try super.afterEach() // To be stackable, must call super.afterEach
        finally builder.clear()
      }
    }
    
    trait Buffer extends BeforeAndAfterEach { this: Suite =>
    
      val buffer = new ListBuffer[String]
    
      override def afterEach() {
        try super.afterEach() // To be stackable, must call super.afterEach
        finally buffer.clear()
      }
    }
    
    class ExampleSpec extends wordspec.AnyWordSpec with Builder with Buffer {
    
      "Testing" should {
        "be easy" in {
          builder.append("easy!")
          assert(builder.toString === "ScalaTest is easy!")
          assert(buffer.isEmpty)
          buffer += "sweet"
        }
    
        "be fun" in {
          builder.append("fun!")
          assert(builder.toString === "ScalaTest is fun!")
          assert(buffer.isEmpty)
          buffer += "clear"
        }
      }
    }
    

    To get the same ordering as withFixture, place your super.beforeEach call at the end of each beforeEach method, and the super.afterEach call at the beginning of each afterEach method, as shown in the previous example. It is a good idea to invoke super.afterEach in a try block and perform cleanup in a finally clause, as shown in the previous example, because this ensures the cleanup code is performed even if super.afterEach throws an exception.

    The difference between stacking traits that extend BeforeAndAfterEach versus traits that implement withFixture is that setup and cleanup code happens before and after the test in BeforeAndAfterEach, but at the beginning and end of the test in withFixture. Thus if a withFixture method completes abruptly with an exception, it is considered a failed test. By contrast, if any of the beforeEach or afterEach methods of BeforeAndAfterEach complete abruptly, it is considered an aborted suite, which will result in a SuiteAborted event.

    Shared tests

    Sometimes you may want to run the same test code on different fixture objects. In other words, you may want to write tests that are "shared" by different fixture objects. To accomplish this in a AnyWordSpec, you first place shared tests in behavior functions. These behavior functions will be invoked during the construction phase of any AnyWordSpec that uses them, so that the tests they contain will be registered as tests in that AnyWordSpec. For example, given this stack class:

    import scala.collection.mutable.ListBuffer
    
    class Stack[T] {
    
      val MAX = 10
      private val buf = new ListBuffer[T]
    
      def push(o: T) {
        if (!full)
          buf.prepend(o)
        else
          throw new IllegalStateException("can't push onto a full stack")
      }
    
      def pop(): T = {
        if (!empty)
          buf.remove(0)
        else
          throw new IllegalStateException("can't pop an empty stack")
      }
    
      def peek: T = {
        if (!empty)
          buf(0)
        else
          throw new IllegalStateException("can't pop an empty stack")
      }
    
      def full: Boolean = buf.size == MAX
      def empty: Boolean = buf.size == 0
      def size = buf.size
    
      override def toString = buf.mkString("Stack(", ", ", ")")
    }
    

    You may want to test the Stack class in different states: empty, full, with one item, with one item less than capacity, etc. You may find you have several tests that make sense any time the stack is non-empty. Thus you'd ideally want to run those same tests for three stack fixture objects: a full stack, a stack with a one item, and a stack with one item less than capacity. With shared tests, you can factor these tests out into a behavior function, into which you pass the stack fixture to use when running the tests. So in your AnyWordSpec for stack, you'd invoke the behavior function three times, passing in each of the three stack fixtures so that the shared tests are run for all three fixtures. You can define a behavior function that encapsulates these shared tests inside the AnyWordSpec that uses them. If they are shared between different AnyWordSpecs, however, you could also define them in a separate trait that is mixed into each AnyWordSpec that uses them.

    For example, here the nonEmptyStack behavior function (in this case, a behavior method) is defined in a trait along with another method containing shared tests for non-full stacks:

    trait StackBehaviors { this: wordspec.AnyWordSpec =>
    
      def nonEmptyStack(newStack: => Stack[Int], lastItemAdded: Int) {
    
        "be non-empty" in {
          assert(!newStack.empty)
        }
    
        "return the top item on peek" in {
          assert(newStack.peek === lastItemAdded)
        }
    
        "not remove the top item on peek" in {
          val stack = newStack
          val size = stack.size
          assert(stack.peek === lastItemAdded)
          assert(stack.size === size)
        }
    
        "remove the top item on pop" in {
          val stack = newStack
          val size = stack.size
          assert(stack.pop === lastItemAdded)
          assert(stack.size === size - 1)
        }
      }
    
      def nonFullStack(newStack: => Stack[Int]) {
    
        "not be full" in {
          assert(!newStack.full)
        }
    
        "add to the top on push" in {
          val stack = newStack
          val size = stack.size
          stack.push(7)
          assert(stack.size === size + 1)
          assert(stack.peek === 7)
        }
      }
    }
    

    Given these behavior functions, you could invoke them directly, but AnyWordSpec offers a DSL for the purpose, which looks like this:

    behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
    behave like nonFullStack(stackWithOneItem)
    

    If you prefer to use an imperative style to change fixtures, for example by mixing in BeforeAndAfterEach and reassigning a stack var in beforeEach, you could write your behavior functions in the context of that var, which means you wouldn't need to pass in the stack fixture because it would be in scope already inside the behavior function. In that case, your code would look like this:

    behave like nonEmptyStack // assuming lastValuePushed is also in scope inside nonEmptyStack
    behave like nonFullStack
    

    The recommended style, however, is the functional, pass-all-the-needed-values-in style. Here's an example:

    class SharedTestExampleSpec extends wordspec.AnyWordSpec with StackBehaviors {
    
      // Stack fixture creation methods
      def emptyStack = new Stack[Int]
    
      def fullStack = {
        val stack = new Stack[Int]
        for (i <- 0 until stack.MAX)
          stack.push(i)
        stack
      }
    
      def stackWithOneItem = {
        val stack = new Stack[Int]
        stack.push(9)
        stack
      }
    
      def stackWithOneItemLessThanCapacity = {
        val stack = new Stack[Int]
        for (i <- 1 to 9)
          stack.push(i)
        stack
      }
    
      val lastValuePushed = 9
    
      "A Stack" when {
        "empty" should {
          "be empty" in {
            assert(emptyStack.empty)
          }
    
          "complain on peek" in {
            assertThrows[IllegalStateException] {
              emptyStack.peek
            }
          }
    
          "complain on pop" in {
            assertThrows[IllegalStateException] {
              emptyStack.pop
            }
          }
        }
    
        "it contains one item" should {
          behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
          behave like nonFullStack(stackWithOneItem)
        }
    
        "it contains one item less than capacity" should {
          behave like nonEmptyStack(stackWithOneItemLessThanCapacity, lastValuePushed)
          behave like nonFullStack(stackWithOneItemLessThanCapacity)
        }
    
        "full" should {
          "be full" in {
            assert(fullStack.full)
          }
    
          behave like nonEmptyStack(fullStack, lastValuePushed)
    
          "complain on a push" in {
            assertThrows[IllegalStateException] {
              fullStack.push(10)
            }
          }
        }
      }
    }
    

    If you load these classes into the Scala interpreter (with scalatest's JAR file on the class path), and execute it, you'll see:

    scala> org.scalatest.run(new SharedTestExampleSpec)
    SharedTestExampleSpec:
    A Stack
      when empty
      - should be empty
      - should complain on peek
      - should complain on pop
      when it contains one item
      - should be non-empty
      - should return the top item on peek
      - should not remove the top item on peek
      - should remove the top item on pop
      - should not be full
      - should add to the top on push
      when it contains one item less than capacity
      - should be non-empty
      - should return the top item on peek
      - should not remove the top item on peek
      - should remove the top item on pop
      - should not be full
      - should add to the top on push
      when full
      - should be full
      - should be non-empty
      - should return the top item on peek
      - should not remove the top item on peek
      - should remove the top item on pop
      - should complain on a push
    

    One thing to keep in mind when using shared tests is that in ScalaTest, each test in a suite must have a unique name. If you register the same tests repeatedly in the same suite, one problem you may encounter is an exception at runtime complaining that multiple tests are being registered with the same test name. A good way to solve this problem in a AnyWordSpec is to make sure each invocation of a behavior function is in the context of a different surrounding when, should/must/can, or which clause, because a test's name is the concatenation of its surrounding clauses and after words, followed by the "spec text". For example, the following code in a AnyWordSpec would register a test with the name "A Stack when empty should be empty":

    "A Stack" when {
      "empty" should {
        "be empty" in {
          assert(emptyStack.empty)
        }
      }
    }
    // ...
    

    If the "be empty" test was factored out into a behavior function, it could be called repeatedly so long as each invocation of the behavior function is in the context of a different surrounding when clauses.

    Annotations
    @Finders()
  2. trait AnyWordSpecLike extends TestSuite with TestRegistration with ShouldVerb with MustVerb with CanVerb with Informing with Notifying with Alerting with Documenting

    Permalink

    Implementation trait for class AnyWordSpec, which facilitates a “behavior-driven” style of development (BDD), in which tests are combined with text that specifies the behavior the tests verify.

    Implementation trait for class AnyWordSpec, which facilitates a “behavior-driven” style of development (BDD), in which tests are combined with text that specifies the behavior the tests verify.

    AnyWordSpec is a class, not a trait, to minimize compile time given there is a slight compiler overhead to mixing in traits compared to extending classes. If you need to mix the behavior of AnyWordSpec into some other class, you can use this trait instead, because class AnyWordSpec does nothing more than extend this trait and add a nice toString implementation.

    See the documentation of the class for a detailed overview of AnyWordSpec.

    Annotations
    @Finders()
  3. abstract class FixtureAnyWordSpec extends FixtureAnyWordSpecLike

    Permalink

    A sister class to org.scalatest.wordspec.AnyWordSpec that can pass a fixture object into its tests.

    A sister class to org.scalatest.wordspec.AnyWordSpec that can pass a fixture object into its tests.

    Recommended Usage: Use class FixtureAnyWordSpec in situations for which AnyWordSpec would be a good choice, when all or most tests need the same fixture objects that must be cleaned up afterwards. Note: FixtureAnyWordSpec is intended for use in special situations, with class AnyWordSpec used for general needs. For more insight into where FixtureAnyWordSpec fits in the big picture, see the withFixture(OneArgTest) subsection of the Shared fixtures section in the documentation for class AnyWordSpec.

    Class FixtureAnyWordSpec behaves similarly to class org.scalatest.wordspec.AnyWordSpec, except that tests may have a fixture parameter. The type of the fixture parameter is defined by the abstract FixtureParam type, which is a member of this class. This class also has an abstract withFixture method. This withFixture method takes a OneArgTest, which is a nested trait defined as a member of this class. OneArgTest has an apply method that takes a FixtureParam. This apply method is responsible for running a test. This class's runTest method delegates the actual running of each test to withFixture(OneArgTest), passing in the test code to run via the OneArgTest argument. The withFixture(OneArgTest) method (abstract in this class) is responsible for creating the fixture argument and passing it to the test function.

    Subclasses of this class must, therefore, do three things differently from a plain old org.scalatest.wordspec.AnyWordSpec:

    • define the type of the fixture parameter by specifying type FixtureParam
    • define the withFixture(OneArgTest) method
    • write tests that take a fixture parameter
    • (You can also define tests that don't take a fixture parameter.)

    If the fixture you want to pass into your tests consists of multiple objects, you will need to combine them into one object to use this class. One good approach to passing multiple fixture objects is to encapsulate them in a case class. Here's an example:

    case class FixtureParam(file: File, writer: FileWriter)
    

    To enable the stacking of traits that define withFixture(NoArgTest), it is a good idea to let withFixture(NoArgTest) invoke the test function instead of invoking the test function directly. To do so, you'll need to convert the OneArgTest to a NoArgTest. You can do that by passing the fixture object to the toNoArgTest method of OneArgTest. In other words, instead of writing “test(theFixture)”, you'd delegate responsibility for invoking the test function to the withFixture(NoArgTest) method of the same instance by writing:

    withFixture(test.toNoArgTest(theFixture))
    

    Here's a complete example:

    package org.scalatest.examples.wordspec.oneargtest
    
    import org.scalatest._
    import java.io._
    
    class ExampleSpec extends wordspec.FixtureAnyWordSpec {
    
      case class FixtureParam(file: File, writer: FileWriter)
    
      def withFixture(test: OneArgTest) = {
    
        // create the fixture
        val file = File.createTempFile("hello", "world")
        val writer = new FileWriter(file)
        val theFixture = FixtureParam(file, writer)
    
        try {
          writer.write("ScalaTest is ") // set up the fixture
          withFixture(test.toNoArgTest(theFixture)) // "loan" the fixture to the test
        }
        finally writer.close() // clean up the fixture
      }
    
      "Testing" should {
        "be easy" in { f =>
          f.writer.write("easy!")
          f.writer.flush()
          assert(f.file.length === 18)
        }
    
        "be fun" in { f =>
          f.writer.write("fun!")
          f.writer.flush()
          assert(f.file.length === 17)
        }
      }
    }
    

    If a test fails, the OneArgTest function will result in a Failed wrapping the exception describing the failure. To ensure clean up happens even if a test fails, you should invoke the test function from inside a try block and do the cleanup in a finally clause, as shown in the previous example.

    Sharing fixtures across classes

    If multiple test classes need the same fixture, you can define the FixtureParam and withFixture(OneArgTest) implementations in a trait, then mix that trait into the test classes that need it. For example, if your application requires a database and your integration tests use that database, you will likely have many test classes that need a database fixture. You can create a "database fixture" trait that creates a database with a unique name, passes the connector into the test, then removes the database once the test completes. This is shown in the following example:

    package org.scalatest.examples.fixture.wordspec.sharing
    
    import java.util.concurrent.ConcurrentHashMap
    import org.scalatest._
    import DbServer._
    import java.util.UUID.randomUUID
    
    object DbServer { // Simulating a database server
      type Db = StringBuffer
      private val databases = new ConcurrentHashMap[String, Db]
      def createDb(name: String): Db = {
        val db = new StringBuffer
        databases.put(name, db)
        db
      }
      def removeDb(name: String) {
        databases.remove(name)
      }
    }
    
    trait DbFixture { this: FixtureSuite =>
    
      type FixtureParam = Db
    
      // Allow clients to populate the database after
      // it is created
      def populateDb(db: Db) {}
    
      def withFixture(test: OneArgTest) = {
        val dbName = randomUUID.toString
        val db = createDb(dbName) // create the fixture
        try {
          populateDb(db) // setup the fixture
          withFixture(test.toNoArgTest(db)) // "loan" the fixture to the test
        }
        finally removeDb(dbName) // clean up the fixture
      }
    }
    
    class ExampleSpec extends wordspec.FixtureAnyWordSpec with DbFixture {
    
      override def populateDb(db: Db) { // setup the fixture
        db.append("ScalaTest is ")
      }
    
      "Testing" should {
        "should be easy" in { db =>
          db.append("easy!")
          assert(db.toString === "ScalaTest is easy!")
        }
    
        "should be fun" in { db =>
          db.append("fun!")
          assert(db.toString === "ScalaTest is fun!")
        }
      }
    
      // This test doesn't need a Db
      "Test code" should {
        "should be clear" in { () =>
          val buf = new StringBuffer
          buf.append("ScalaTest code is ")
          buf.append("clear!")
          assert(buf.toString === "ScalaTest code is clear!")
        }
      }
    }
    

    Often when you create fixtures in a trait like DbFixture, you'll still need to enable individual test classes to "setup" a newly created fixture before it gets passed into the tests. A good way to accomplish this is to pass the newly created fixture into a setup method, like populateDb in the previous example, before passing it to the test function. Classes that need to perform such setup can override the method, as does ExampleSpec.

    If a test doesn't need the fixture, you can indicate that by providing a no-arg instead of a one-arg function, as is done in the third test in the previous example, “Test code should be clear”. In other words, instead of starting your function literal with something like “db =>”, you'd start it with “() =>”. For such tests, runTest will not invoke withFixture(OneArgTest). It will instead directly invoke withFixture(NoArgTest).

    Both examples shown above demonstrate the technique of giving each test its own "fixture sandbox" to play in. When your fixtures involve external side-effects, like creating files or databases, it is a good idea to give each file or database a unique name as is done in these examples. This keeps tests completely isolated, allowing you to run them in parallel if desired. You could mix ParallelTestExecution into either of these ExampleSpec classes, and the tests would run in parallel just fine.

    Annotations
    @Finders()
  4. trait FixtureAnyWordSpecLike extends FixtureTestSuite with FixtureTestRegistration with ShouldVerb with MustVerb with CanVerb with Informing with Notifying with Alerting with Documenting

    Permalink

    Implementation trait for class FixtureAnyWordSpec, which is a sister class to org.scalatest.wordspec.AnyWordSpec that can pass a fixture object into its tests.

    Implementation trait for class FixtureAnyWordSpec, which is a sister class to org.scalatest.wordspec.AnyWordSpec that can pass a fixture object into its tests.

    FixtureAnyWordSpec is a class, not a trait, to minimize compile time given there is a slight compiler overhead to mixing in traits compared to extending classes. If you need to mix the behavior of FixtureAnyWordSpec into some other class, you can use this trait instead, because class FixtureAnyWordSpec does nothing more than extend this trait and add a nice toString implementation.

    See the documentation of the class for a detailed overview of FixtureAnyWordSpec.

    Annotations
    @Finders()

Inherited from AnyRef

Inherited from Any

Ungrouped