java.lang.Object
- com.day.image.LineStyle

All Implemented Interfaces:

Paint, Stroke, Transparency
```
public final class LineStyle
extends Object
implements Paint, Stroke
```
The LineStyle class implements the Communiqu� 2 line style. This line style embraces both the stroke style (dashing, line width) and the line color. To use this line style for line drawing, you would get the color to set the Paint of the Java2D Graphics2D and you would get the stroke to set the Stroke.
The line style is initialized using the paint only, in which case it defaults to define a style with the given paint which is solid and has the width of one point. The line style can also be initialized giving the paint, the line width and the length of the dash and blank parts of a dashed line. See the comments on the LineStyle(Paint, float, float, float) constructor for information on the possibilities.
The line style is immutable and final.

Since:

coati

Field Summary

Fields
Modifier and Type	Field	Description
`static LineStyle`	`DEFAULT`	The default line style is a solid black line, 1px wide
`static int`	`STYLE_DASHED`	Style code for a dashed line, where the mark length is 3 points and the blank length is 2 points.
`static int`	`STYLE_DOTTED`	Style code for a dotted line, where both the mark and the blank length are one point.
`static int`	`STYLE_FANCY`	Style code for a fancy dashed line, where both the mark and the blank lentghs are specified with the constructor.
`static int`	`STYLE_SOLID`	Style code for a solid line.

Fields inherited from interface java.awt.Transparency
BITMASK, OPAQUE, TRANSLUCENT

Constructor Summary

Constructors
Constructor	Description
`LineStyle(Paint paint)`	Creates a line style for a line with the given color.
`LineStyle(Paint paint, float mark, float blank, float width)`	Creates a new line style with the given paint and stroking attributes.

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`PaintContext`	`createContext(ColorModel cm, Rectangle deviceBounds, Rectangle2D userBounds, AffineTransform xform, RenderingHints hints)`	Creates and returns a `PaintContext` used to generate the color pattern.
`Shape`	`createStrokedShape(Shape p)`	Returns an outline `Shape` which encloses the area that should be painted when the `Shape` is stroked according to the rules defined by the object implementing the `Stroke` interface.
`float`	`getBlank()`	Returns the blank length of this line style.
`float`	`getMark()`	Returns the mark length of this line style.
`int`	`getStyle()`	Returns the style of this line style which is one of the predefined style constants.
`int`	`getTransparency()`	Returns the type of this `Transparency`.
`float`	`getWidth()`	Returns the width of the line according to the line style.
`String`	`toString()`	Returns a String representation of the LineStyle

Methods inherited from class java.lang.Object
equals, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Field Detail
  - STYLE_SOLID
```
public static final int STYLE_SOLID
```
    Style code for a solid line.
    
    See Also:
    
    Constant Field Values
  - STYLE_DOTTED
```
public static final int STYLE_DOTTED
```
    Style code for a dotted line, where both the mark and the blank length are one point.
    
    See Also:
    
    Constant Field Values
  - STYLE_DASHED
```
public static final int STYLE_DASHED
```
    Style code for a dashed line, where the mark length is 3 points and the blank length is 2 points.
    
    See Also:
    
    Constant Field Values
  - STYLE_FANCY
```
public static final int STYLE_FANCY
```
    Style code for a fancy dashed line, where both the mark and the blank lentghs are specified with the constructor. This style code is set by the constructor in this case. If this style code is set in the constructor, when the mark length is set to zero, it has no effect and the line is styled to be solid.
    
    See Also:
    
    Constant Field Values
  - DEFAULT
```
public static final LineStyle DEFAULT
```
    The default line style is a solid black line, 1px wide
- Constructor Detail
  - LineStyle
```
public LineStyle(Paint paint)
```
    Creates a line style for a line with the given color. The line is solid and has a width of one point.
    
    Parameters:
    
    paint - The Paint value to set. If this is null, the line color is defined to be black.
  - LineStyle
```
public LineStyle(Paint paint,
                 float mark,
                 float blank,
                 float width)
```
    Creates a new line style with the given paint and stroking attributes. The mark and blank parameters are special : If mark is zero, the blank parameters is interpreted as a generic style and the mark and blank values are reset accordingly :
    
    STYLE_DOTTED Dotted stroke with mark=1, blank=1
    STYLE_DASHED Dashed stroke with mark=3, blank=2
    else Solid stroke with no breaks, that is mark=1, blank=0
    
    If the mark parameters is given as a non-zero value, the style is set to STYLE_FANCY. If any of the parameters has a value as listed in the following table, a default value is assumed :
    
    paint == null black color
    isNaN(mark) mark=0, prompting the above algorithm
    isNaN(blank) blank=STYLE_SOLID, which applies if mark is zero
    isNan(width) width = 1
    
    If mark is non-zero (or after the above listed treatment) a dashed stroke is defined, where mark defines the point length of set points and blank defines the point length of unset points, applied alternatively for the length of the line to be drawn. If on the other hand mark is non-zero but the blank length is zero, this defines a solid line.
    
    Parameters:
    
    paint - The paint value to set. If this is null, the line color is defined to be black.
    
    mark - The length of the mark in points. If zero, negative or NaN the blank parameter contains a style constant.
    
    blank - The length of the blank in points or a style constant if the length is zero, negative or NaN. If blank is negative, zero or NaN the line style is defined to be solid. The line style is also defined to be solid, if the blank parameter is not a valid style constant if mark is zero.
    
    width - The line width. If this is zero, negative or NaN, the width defaults to 1 point.
- Method Detail
  - getStyle
```
public int getStyle()
```
    Returns the style of this line style which is one of the predefined style constants.
    
    Returns:
    
    the style of this line style.
  - getMark
```
public float getMark()
```
    Returns the mark length of this line style. This is either the mark length used to construct the line style or the length of the mark according to the style used to create the line style.
    
    Returns:
    
    the mark length of this line style.
  - getBlank
```
public float getBlank()
```
    Returns the blank length of this line style. This is either the blank length used to construct the line style or the length of the blank according to the style used to create the line style.
    
    Returns:
    
    the blank length of this line style.
  - getWidth
```
public float getWidth()
```
    Returns the width of the line according to the line style.
    
    Returns:
    
    the width of the line according to the line style.
  - createContext
```
public PaintContext createContext(ColorModel cm,
                                  Rectangle deviceBounds,
                                  Rectangle2D userBounds,
                                  AffineTransform xform,
                                  RenderingHints hints)
```
    Creates and returns a PaintContext used to generate the color pattern.
    
    Specified by:
    
    createContext in interface Paint
    
    Parameters:
    
    cm - the ColorModel that receives the Paint data. This is used only as a hint.
    
    deviceBounds - the device space bounding box of the graphics primitive
    userBounds - the user space bounding box of the graphics primitive being rendered
    
    xform - the AffineTransform from user space into device space
    
    hints - the hint that the context object uses to choose between rendering alternatives
    
    Returns:
    
    the PaintContext for generating color patterns
    
    See Also:
    
    PaintContext
  - getTransparency
```
public int getTransparency()
```
    Returns the type of this Transparency.
    
    Specified by:
    
    getTransparency in interface Transparency
    
    Returns:
    
    the field type of this Transparency, which is either OPAQUE, BITMASK or TRANSLUCENT.
  - createStrokedShape
```
public Shape createStrokedShape(Shape p)
```
    Returns an outline Shape which encloses the area that should be painted when the Shape is stroked according to the rules defined by the object implementing the Stroke interface.
    
    Specified by:
    
    createStrokedShape in interface Stroke
    
    Parameters:
    
    p - a Shape to be stroked
    
    Returns:
    
    the stroked outline Shape.
  - toString
```
public String toString()
```
    Returns a String representation of the LineStyle
    
    Overrides:
    
    toString in class Object
    
    Returns:
    
    a String representation of the LineStyle

STYLE_DOTTED	Dotted stroke with mark=1, blank=1
STYLE_DASHED	Dashed stroke with mark=3, blank=2
else	Solid stroke with no breaks, that is mark=1, blank=0

`paint == null`	black color
`isNaN(mark)`	mark=0, prompting the above algorithm
`isNaN(blank)`	blank=STYLE_SOLID, which applies if mark is zero
`isNan(width)`	width = 1

Class LineStyle

Field Summary

Fields inherited from interface java.awt.Transparency

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

STYLE_SOLID

STYLE_DOTTED

STYLE_DASHED

STYLE_FANCY

DEFAULT

Constructor Detail

LineStyle

LineStyle

Method Detail

getStyle

getMark

getBlank

getWidth

createContext

getTransparency

createStrokedShape

toString