@ThreadSafe @Generated(value="com.amazonaws:aws-java-sdk-code-generator") public class AmazonDynamoDBAsyncClient extends AmazonDynamoDBClient implements AmazonDynamoDBAsync
AsyncHandler can be used to receive notification when
an asynchronous operation completes.
Amazon DynamoDB is a fully managed NoSQL database service that provides fast and predictable performance with seamless scalability. DynamoDB lets you offload the administrative burdens of operating and scaling a distributed database, so that you don't have to worry about hardware provisioning, setup and configuration, replication, software patching, or cluster scaling.
With DynamoDB, you can create database tables that can store and retrieve any amount of data, and serve any level of request traffic. You can scale up or scale down your tables' throughput capacity without downtime or performance degradation, and use the AWS Management Console to monitor resource utilization and performance metrics.
DynamoDB automatically spreads the data and traffic for your tables over a sufficient number of servers to handle your throughput and storage requirements, while maintaining consistent and fast performance. All of your data is stored on solid state disks (SSDs) and automatically replicated across multiple Availability Zones in an AWS region, providing built-in high availability and data durability.
configFactoryclient, clientConfiguration, endpoint, LOGGING_AWS_REQUEST_METRIC, requestHandler2s, timeOffsetENDPOINT_PREFIX| Constructor and Description |
|---|
AmazonDynamoDBAsyncClient()
Deprecated.
|
AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials)
Deprecated.
|
AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials,
ClientConfiguration clientConfiguration,
ExecutorService executorService)
|
AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials,
ExecutorService executorService)
|
AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider)
Deprecated.
|
AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
ClientConfiguration clientConfiguration)
|
AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
ClientConfiguration clientConfiguration,
ExecutorService executorService)
|
AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
ExecutorService executorService)
|
AmazonDynamoDBAsyncClient(ClientConfiguration clientConfiguration)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
static AmazonDynamoDBAsyncClientBuilder |
asyncBuilder() |
Future<BatchGetItemResult> |
batchGetItemAsync(BatchGetItemRequest request)
The
BatchGetItem operation returns the attributes of one or more items from one or more tables. |
Future<BatchGetItemResult> |
batchGetItemAsync(BatchGetItemRequest request,
AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)
The
BatchGetItem operation returns the attributes of one or more items from one or more tables. |
Future<BatchGetItemResult> |
batchGetItemAsync(Map<String,KeysAndAttributes> requestItems)
Simplified method form for invoking the BatchGetItem operation.
|
Future<BatchGetItemResult> |
batchGetItemAsync(Map<String,KeysAndAttributes> requestItems,
AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)
Simplified method form for invoking the BatchGetItem operation with an AsyncHandler.
|
Future<BatchGetItemResult> |
batchGetItemAsync(Map<String,KeysAndAttributes> requestItems,
String returnConsumedCapacity)
Simplified method form for invoking the BatchGetItem operation.
|
Future<BatchGetItemResult> |
batchGetItemAsync(Map<String,KeysAndAttributes> requestItems,
String returnConsumedCapacity,
AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)
Simplified method form for invoking the BatchGetItem operation with an AsyncHandler.
|
Future<BatchWriteItemResult> |
batchWriteItemAsync(BatchWriteItemRequest request)
The
BatchWriteItem operation puts or deletes multiple items in one or more tables. |
Future<BatchWriteItemResult> |
batchWriteItemAsync(BatchWriteItemRequest request,
AsyncHandler<BatchWriteItemRequest,BatchWriteItemResult> asyncHandler)
The
BatchWriteItem operation puts or deletes multiple items in one or more tables. |
Future<BatchWriteItemResult> |
batchWriteItemAsync(Map<String,List<WriteRequest>> requestItems)
Simplified method form for invoking the BatchWriteItem operation.
|
Future<BatchWriteItemResult> |
batchWriteItemAsync(Map<String,List<WriteRequest>> requestItems,
AsyncHandler<BatchWriteItemRequest,BatchWriteItemResult> asyncHandler)
Simplified method form for invoking the BatchWriteItem operation with an AsyncHandler.
|
Future<CreateTableResult> |
createTableAsync(CreateTableRequest request)
The
CreateTable operation adds a new table to your account. |
Future<CreateTableResult> |
createTableAsync(CreateTableRequest request,
AsyncHandler<CreateTableRequest,CreateTableResult> asyncHandler)
The
CreateTable operation adds a new table to your account. |
Future<CreateTableResult> |
createTableAsync(List<AttributeDefinition> attributeDefinitions,
String tableName,
List<KeySchemaElement> keySchema,
ProvisionedThroughput provisionedThroughput)
Simplified method form for invoking the CreateTable operation.
|
Future<CreateTableResult> |
createTableAsync(List<AttributeDefinition> attributeDefinitions,
String tableName,
List<KeySchemaElement> keySchema,
ProvisionedThroughput provisionedThroughput,
AsyncHandler<CreateTableRequest,CreateTableResult> asyncHandler)
Simplified method form for invoking the CreateTable operation with an AsyncHandler.
|
Future<DeleteItemResult> |
deleteItemAsync(DeleteItemRequest request)
Deletes a single item in a table by primary key.
|
Future<DeleteItemResult> |
deleteItemAsync(DeleteItemRequest request,
AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)
Deletes a single item in a table by primary key.
|
Future<DeleteItemResult> |
deleteItemAsync(String tableName,
Map<String,AttributeValue> key)
Simplified method form for invoking the DeleteItem operation.
|
Future<DeleteItemResult> |
deleteItemAsync(String tableName,
Map<String,AttributeValue> key,
AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)
Simplified method form for invoking the DeleteItem operation with an AsyncHandler.
|
Future<DeleteItemResult> |
deleteItemAsync(String tableName,
Map<String,AttributeValue> key,
String returnValues)
Simplified method form for invoking the DeleteItem operation.
|
Future<DeleteItemResult> |
deleteItemAsync(String tableName,
Map<String,AttributeValue> key,
String returnValues,
AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)
Simplified method form for invoking the DeleteItem operation with an AsyncHandler.
|
Future<DeleteTableResult> |
deleteTableAsync(DeleteTableRequest request)
The
DeleteTable operation deletes a table and all of its items. |
Future<DeleteTableResult> |
deleteTableAsync(DeleteTableRequest request,
AsyncHandler<DeleteTableRequest,DeleteTableResult> asyncHandler)
The
DeleteTable operation deletes a table and all of its items. |
Future<DeleteTableResult> |
deleteTableAsync(String tableName)
Simplified method form for invoking the DeleteTable operation.
|
Future<DeleteTableResult> |
deleteTableAsync(String tableName,
AsyncHandler<DeleteTableRequest,DeleteTableResult> asyncHandler)
Simplified method form for invoking the DeleteTable operation with an AsyncHandler.
|
Future<DescribeLimitsResult> |
describeLimitsAsync(DescribeLimitsRequest request)
Returns the current provisioned-capacity limits for your AWS account in a region, both for the region as a whole
and for any one DynamoDB table that you create there.
|
Future<DescribeLimitsResult> |
describeLimitsAsync(DescribeLimitsRequest request,
AsyncHandler<DescribeLimitsRequest,DescribeLimitsResult> asyncHandler)
Returns the current provisioned-capacity limits for your AWS account in a region, both for the region as a whole
and for any one DynamoDB table that you create there.
|
Future<DescribeTableResult> |
describeTableAsync(DescribeTableRequest request)
Returns information about the table, including the current status of the table, when it was created, the primary
key schema, and any indexes on the table.
|
Future<DescribeTableResult> |
describeTableAsync(DescribeTableRequest request,
AsyncHandler<DescribeTableRequest,DescribeTableResult> asyncHandler)
Returns information about the table, including the current status of the table, when it was created, the primary
key schema, and any indexes on the table.
|
Future<DescribeTableResult> |
describeTableAsync(String tableName)
Simplified method form for invoking the DescribeTable operation.
|
Future<DescribeTableResult> |
describeTableAsync(String tableName,
AsyncHandler<DescribeTableRequest,DescribeTableResult> asyncHandler)
Simplified method form for invoking the DescribeTable operation with an AsyncHandler.
|
Future<DescribeTimeToLiveResult> |
describeTimeToLiveAsync(DescribeTimeToLiveRequest request)
Gives a description of the Time to Live (TTL) status on the specified table.
|
Future<DescribeTimeToLiveResult> |
describeTimeToLiveAsync(DescribeTimeToLiveRequest request,
AsyncHandler<DescribeTimeToLiveRequest,DescribeTimeToLiveResult> asyncHandler)
Gives a description of the Time to Live (TTL) status on the specified table.
|
ExecutorService |
getExecutorService()
Returns the executor service used by this client to execute async requests.
|
Future<GetItemResult> |
getItemAsync(GetItemRequest request)
The
GetItem operation returns a set of attributes for the item with the given primary key. |
Future<GetItemResult> |
getItemAsync(GetItemRequest request,
AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)
The
GetItem operation returns a set of attributes for the item with the given primary key. |
Future<GetItemResult> |
getItemAsync(String tableName,
Map<String,AttributeValue> key)
Simplified method form for invoking the GetItem operation.
|
Future<GetItemResult> |
getItemAsync(String tableName,
Map<String,AttributeValue> key,
AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)
Simplified method form for invoking the GetItem operation with an AsyncHandler.
|
Future<GetItemResult> |
getItemAsync(String tableName,
Map<String,AttributeValue> key,
Boolean consistentRead)
Simplified method form for invoking the GetItem operation.
|
Future<GetItemResult> |
getItemAsync(String tableName,
Map<String,AttributeValue> key,
Boolean consistentRead,
AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)
Simplified method form for invoking the GetItem operation with an AsyncHandler.
|
Future<ListTablesResult> |
listTablesAsync()
Simplified method form for invoking the ListTables operation.
|
Future<ListTablesResult> |
listTablesAsync(AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
Simplified method form for invoking the ListTables operation with an AsyncHandler.
|
Future<ListTablesResult> |
listTablesAsync(Integer limit)
Simplified method form for invoking the ListTables operation.
|
Future<ListTablesResult> |
listTablesAsync(Integer limit,
AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
Simplified method form for invoking the ListTables operation with an AsyncHandler.
|
Future<ListTablesResult> |
listTablesAsync(ListTablesRequest request)
Returns an array of table names associated with the current account and endpoint.
|
Future<ListTablesResult> |
listTablesAsync(ListTablesRequest request,
AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
Returns an array of table names associated with the current account and endpoint.
|
Future<ListTablesResult> |
listTablesAsync(String exclusiveStartTableName)
Simplified method form for invoking the ListTables operation.
|
Future<ListTablesResult> |
listTablesAsync(String exclusiveStartTableName,
AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
Simplified method form for invoking the ListTables operation with an AsyncHandler.
|
Future<ListTablesResult> |
listTablesAsync(String exclusiveStartTableName,
Integer limit)
Simplified method form for invoking the ListTables operation.
|
Future<ListTablesResult> |
listTablesAsync(String exclusiveStartTableName,
Integer limit,
AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
Simplified method form for invoking the ListTables operation with an AsyncHandler.
|
Future<ListTagsOfResourceResult> |
listTagsOfResourceAsync(ListTagsOfResourceRequest request)
List all tags on an Amazon DynamoDB resource.
|
Future<ListTagsOfResourceResult> |
listTagsOfResourceAsync(ListTagsOfResourceRequest request,
AsyncHandler<ListTagsOfResourceRequest,ListTagsOfResourceResult> asyncHandler)
List all tags on an Amazon DynamoDB resource.
|
Future<PutItemResult> |
putItemAsync(PutItemRequest request)
Creates a new item, or replaces an old item with a new item.
|
Future<PutItemResult> |
putItemAsync(PutItemRequest request,
AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)
Creates a new item, or replaces an old item with a new item.
|
Future<PutItemResult> |
putItemAsync(String tableName,
Map<String,AttributeValue> item)
Simplified method form for invoking the PutItem operation.
|
Future<PutItemResult> |
putItemAsync(String tableName,
Map<String,AttributeValue> item,
AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)
Simplified method form for invoking the PutItem operation with an AsyncHandler.
|
Future<PutItemResult> |
putItemAsync(String tableName,
Map<String,AttributeValue> item,
String returnValues)
Simplified method form for invoking the PutItem operation.
|
Future<PutItemResult> |
putItemAsync(String tableName,
Map<String,AttributeValue> item,
String returnValues,
AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)
Simplified method form for invoking the PutItem operation with an AsyncHandler.
|
Future<QueryResult> |
queryAsync(QueryRequest request)
A
Query operation uses the primary key of a table or a secondary index to directly access items from
that table or index. |
Future<QueryResult> |
queryAsync(QueryRequest request,
AsyncHandler<QueryRequest,QueryResult> asyncHandler)
A
Query operation uses the primary key of a table or a secondary index to directly access items from
that table or index. |
Future<ScanResult> |
scanAsync(ScanRequest request)
The
Scan operation returns one or more items and item attributes by accessing every item in a table
or a secondary index. |
Future<ScanResult> |
scanAsync(ScanRequest request,
AsyncHandler<ScanRequest,ScanResult> asyncHandler)
The
Scan operation returns one or more items and item attributes by accessing every item in a table
or a secondary index. |
Future<ScanResult> |
scanAsync(String tableName,
List<String> attributesToGet)
Simplified method form for invoking the Scan operation.
|
Future<ScanResult> |
scanAsync(String tableName,
List<String> attributesToGet,
AsyncHandler<ScanRequest,ScanResult> asyncHandler)
Simplified method form for invoking the Scan operation with an AsyncHandler.
|
Future<ScanResult> |
scanAsync(String tableName,
List<String> attributesToGet,
Map<String,Condition> scanFilter)
Simplified method form for invoking the Scan operation.
|
Future<ScanResult> |
scanAsync(String tableName,
List<String> attributesToGet,
Map<String,Condition> scanFilter,
AsyncHandler<ScanRequest,ScanResult> asyncHandler)
Simplified method form for invoking the Scan operation with an AsyncHandler.
|
Future<ScanResult> |
scanAsync(String tableName,
Map<String,Condition> scanFilter)
Simplified method form for invoking the Scan operation.
|
Future<ScanResult> |
scanAsync(String tableName,
Map<String,Condition> scanFilter,
AsyncHandler<ScanRequest,ScanResult> asyncHandler)
Simplified method form for invoking the Scan operation with an AsyncHandler.
|
void |
shutdown()
Shuts down the client, releasing all managed resources.
|
Future<TagResourceResult> |
tagResourceAsync(TagResourceRequest request)
Associate a set of tags with an Amazon DynamoDB resource.
|
Future<TagResourceResult> |
tagResourceAsync(TagResourceRequest request,
AsyncHandler<TagResourceRequest,TagResourceResult> asyncHandler)
Associate a set of tags with an Amazon DynamoDB resource.
|
Future<UntagResourceResult> |
untagResourceAsync(UntagResourceRequest request)
Removes the association of tags from an Amazon DynamoDB resource.
|
Future<UntagResourceResult> |
untagResourceAsync(UntagResourceRequest request,
AsyncHandler<UntagResourceRequest,UntagResourceResult> asyncHandler)
Removes the association of tags from an Amazon DynamoDB resource.
|
Future<UpdateItemResult> |
updateItemAsync(String tableName,
Map<String,AttributeValue> key,
Map<String,AttributeValueUpdate> attributeUpdates)
Simplified method form for invoking the UpdateItem operation.
|
Future<UpdateItemResult> |
updateItemAsync(String tableName,
Map<String,AttributeValue> key,
Map<String,AttributeValueUpdate> attributeUpdates,
AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)
Simplified method form for invoking the UpdateItem operation with an AsyncHandler.
|
Future<UpdateItemResult> |
updateItemAsync(String tableName,
Map<String,AttributeValue> key,
Map<String,AttributeValueUpdate> attributeUpdates,
String returnValues)
Simplified method form for invoking the UpdateItem operation.
|
Future<UpdateItemResult> |
updateItemAsync(String tableName,
Map<String,AttributeValue> key,
Map<String,AttributeValueUpdate> attributeUpdates,
String returnValues,
AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)
Simplified method form for invoking the UpdateItem operation with an AsyncHandler.
|
Future<UpdateItemResult> |
updateItemAsync(UpdateItemRequest request)
Edits an existing item's attributes, or adds a new item to the table if it does not already exist.
|
Future<UpdateItemResult> |
updateItemAsync(UpdateItemRequest request,
AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)
Edits an existing item's attributes, or adds a new item to the table if it does not already exist.
|
Future<UpdateTableResult> |
updateTableAsync(String tableName,
ProvisionedThroughput provisionedThroughput)
Simplified method form for invoking the UpdateTable operation.
|
Future<UpdateTableResult> |
updateTableAsync(String tableName,
ProvisionedThroughput provisionedThroughput,
AsyncHandler<UpdateTableRequest,UpdateTableResult> asyncHandler)
Simplified method form for invoking the UpdateTable operation with an AsyncHandler.
|
Future<UpdateTableResult> |
updateTableAsync(UpdateTableRequest request)
Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given
table.
|
Future<UpdateTableResult> |
updateTableAsync(UpdateTableRequest request,
AsyncHandler<UpdateTableRequest,UpdateTableResult> asyncHandler)
Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given
table.
|
Future<UpdateTimeToLiveResult> |
updateTimeToLiveAsync(UpdateTimeToLiveRequest request)
Specify the lifetime of individual table items.
|
Future<UpdateTimeToLiveResult> |
updateTimeToLiveAsync(UpdateTimeToLiveRequest request,
AsyncHandler<UpdateTimeToLiveRequest,UpdateTimeToLiveResult> asyncHandler)
Specify the lifetime of individual table items.
|
batchGetItem, batchGetItem, batchGetItem, batchWriteItem, batchWriteItem, builder, calculateCRC32FromCompressedData, createTable, createTable, deleteItem, deleteItem, deleteItem, deleteTable, deleteTable, describeLimits, describeTable, describeTable, describeTimeToLive, getCachedResponseMetadata, getItem, getItem, getItem, listTables, listTables, listTables, listTables, listTables, listTagsOfResource, putItem, putItem, putItem, query, scan, scan, scan, scan, tagResource, untagResource, updateItem, updateItem, updateItem, updateTable, updateTable, updateTimeToLive, waitersaddRequestHandler, addRequestHandler, beforeClientExecution, beforeMarshalling, checkMutability, configureRegion, createExecutionContext, createExecutionContext, createExecutionContext, createSignerProvider, endClientExecution, endClientExecution, getEndpointPrefix, getRequestMetricsCollector, getServiceAbbreviation, getServiceName, getServiceNameIntern, getSigner, getSignerByURI, getSignerOverride, getSignerProvider, getSignerRegionOverride, getTimeOffset, isProfilingEnabled, isRequestMetricsEnabled, makeImmutable, removeRequestHandler, removeRequestHandler, requestMetricCollector, setEndpoint, setEndpointPrefix, setRegion, setServiceNameIntern, setSignerRegionOverride, setTimeOffset, useStrictHostNameVerification, withEndpoint, withRegion, withRegion, withTimeOffsetclone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitbatchGetItem, batchGetItem, batchGetItem, batchWriteItem, batchWriteItem, createTable, createTable, deleteItem, deleteItem, deleteItem, deleteTable, deleteTable, describeLimits, describeTable, describeTable, describeTimeToLive, getCachedResponseMetadata, getItem, getItem, getItem, listTables, listTables, listTables, listTables, listTables, listTagsOfResource, putItem, putItem, putItem, query, scan, scan, scan, scan, setEndpoint, setRegion, tagResource, untagResource, updateItem, updateItem, updateItem, updateTable, updateTable, updateTimeToLive, waiters@Deprecated public AmazonDynamoDBAsyncClient()
AmazonDynamoDBAsyncClientBuilder.defaultClient()Asynchronous methods are delegated to a fixed-size thread pool containing 50 threads (to match the default maximum number of concurrent connections to the service).
@Deprecated public AmazonDynamoDBAsyncClient(ClientConfiguration clientConfiguration)
AwsClientBuilder.withClientConfiguration(ClientConfiguration)
Asynchronous methods are delegated to a fixed-size thread pool containing a number of threads equal to the
maximum number of concurrent connections configured via ClientConfiguration.getMaxConnections().
clientConfiguration - The client configuration options controlling how this client connects to DynamoDB (ex: proxy settings,
retry counts, etc).DefaultAWSCredentialsProviderChain,
Executors.newFixedThreadPool(int)@Deprecated public AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials)
AwsClientBuilder.withCredentials(AWSCredentialsProvider)Asynchronous methods are delegated to a fixed-size thread pool containing 50 threads (to match the default maximum number of concurrent connections to the service).
awsCredentials - The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.Executors.newFixedThreadPool(int)@Deprecated public AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials, ExecutorService executorService)
AwsClientBuilder.withCredentials(AWSCredentialsProvider) and
AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)awsCredentials - The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.executorService - The executor service by which all asynchronous requests will be executed.@Deprecated public AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials, ClientConfiguration clientConfiguration, ExecutorService executorService)
AwsClientBuilder.withCredentials(AWSCredentialsProvider) and
AwsClientBuilder.withClientConfiguration(ClientConfiguration) and
AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)awsCredentials - The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.clientConfiguration - Client configuration options (ex: max retry limit, proxy settings, etc).executorService - The executor service by which all asynchronous requests will be executed.@Deprecated public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider)
AwsClientBuilder.withCredentials(AWSCredentialsProvider)Asynchronous methods are delegated to a fixed-size thread pool containing 50 threads (to match the default maximum number of concurrent connections to the service).
awsCredentialsProvider - The AWS credentials provider which will provide credentials to authenticate requests with AWS services.Executors.newFixedThreadPool(int)@Deprecated public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration)
AwsClientBuilder.withCredentials(AWSCredentialsProvider) and
AwsClientBuilder.withClientConfiguration(ClientConfiguration)
Asynchronous methods are delegated to a fixed-size thread pool containing a number of threads equal to the
maximum number of concurrent connections configured via ClientConfiguration.getMaxConnections().
awsCredentialsProvider - The AWS credentials provider which will provide credentials to authenticate requests with AWS services.clientConfiguration - Client configuration options (ex: max retry limit, proxy settings, etc).DefaultAWSCredentialsProviderChain,
Executors.newFixedThreadPool(int)@Deprecated public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ExecutorService executorService)
AwsClientBuilder.withCredentials(AWSCredentialsProvider) and
AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)awsCredentialsProvider - The AWS credentials provider which will provide credentials to authenticate requests with AWS services.executorService - The executor service by which all asynchronous requests will be executed.@Deprecated public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration, ExecutorService executorService)
AwsClientBuilder.withCredentials(AWSCredentialsProvider) and
AwsClientBuilder.withClientConfiguration(ClientConfiguration) and
AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)awsCredentialsProvider - The AWS credentials provider which will provide credentials to authenticate requests with AWS services.clientConfiguration - Client configuration options (ex: max retry limit, proxy settings, etc).executorService - The executor service by which all asynchronous requests will be executed.public static AmazonDynamoDBAsyncClientBuilder asyncBuilder()
public ExecutorService getExecutorService()
public Future<BatchGetItemResult> batchGetItemAsync(BatchGetItemRequest request)
AmazonDynamoDBAsync
The BatchGetItem operation returns the attributes of one or more items from one or more tables. You
identify requested items by primary key.
A single operation can retrieve up to 16 MB of data, which can contain as many as 100 items.
BatchGetItem will return a partial result if the response size limit is exceeded, the table's
provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned,
the operation returns a value for UnprocessedKeys. You can use this value to retry the operation
starting with the next item to get.
If you request more than 100 items BatchGetItem will return a ValidationException with
the message "Too many items requested for the BatchGetItem call".
For example, if you ask to retrieve 100 items, but each individual item is 300 KB in size, the system returns 52
items (so as not to exceed the 16 MB limit). It also returns an appropriate UnprocessedKeys value so
you can get the next page of results. If desired, your application can include its own logic to assemble the
pages of results into one data set.
If none of the items can be processed due to insufficient provisioned throughput on all of the tables in
the request, then BatchGetItem will return a ProvisionedThroughputExceededException. If
at least one of the items is successfully processed, then BatchGetItem completes
successfully, while returning the keys of the unread items in UnprocessedKeys.
If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
By default, BatchGetItem performs eventually consistent reads on every table in the request. If you
want strongly consistent reads instead, you can set ConsistentRead to true for any or
all tables.
In order to minimize response latency, BatchGetItem retrieves items in parallel.
When designing your application, keep in mind that DynamoDB does not return items in any particular order. To
help parse the response by item, include the primary key values for the items in your request in the
ProjectionExpression parameter.
If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Capacity Units Calculations in the Amazon DynamoDB Developer Guide.
batchGetItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a BatchGetItem operation.public Future<BatchGetItemResult> batchGetItemAsync(BatchGetItemRequest request, AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)
AmazonDynamoDBAsync
The BatchGetItem operation returns the attributes of one or more items from one or more tables. You
identify requested items by primary key.
A single operation can retrieve up to 16 MB of data, which can contain as many as 100 items.
BatchGetItem will return a partial result if the response size limit is exceeded, the table's
provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned,
the operation returns a value for UnprocessedKeys. You can use this value to retry the operation
starting with the next item to get.
If you request more than 100 items BatchGetItem will return a ValidationException with
the message "Too many items requested for the BatchGetItem call".
For example, if you ask to retrieve 100 items, but each individual item is 300 KB in size, the system returns 52
items (so as not to exceed the 16 MB limit). It also returns an appropriate UnprocessedKeys value so
you can get the next page of results. If desired, your application can include its own logic to assemble the
pages of results into one data set.
If none of the items can be processed due to insufficient provisioned throughput on all of the tables in
the request, then BatchGetItem will return a ProvisionedThroughputExceededException. If
at least one of the items is successfully processed, then BatchGetItem completes
successfully, while returning the keys of the unread items in UnprocessedKeys.
If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
By default, BatchGetItem performs eventually consistent reads on every table in the request. If you
want strongly consistent reads instead, you can set ConsistentRead to true for any or
all tables.
In order to minimize response latency, BatchGetItem retrieves items in parallel.
When designing your application, keep in mind that DynamoDB does not return items in any particular order. To
help parse the response by item, include the primary key values for the items in your request in the
ProjectionExpression parameter.
If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Capacity Units Calculations in the Amazon DynamoDB Developer Guide.
batchGetItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a BatchGetItem operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<BatchGetItemResult> batchGetItemAsync(Map<String,KeysAndAttributes> requestItems, String returnConsumedCapacity)
batchGetItemAsync in interface AmazonDynamoDBAsyncbatchGetItemAsync(BatchGetItemRequest)public Future<BatchGetItemResult> batchGetItemAsync(Map<String,KeysAndAttributes> requestItems, String returnConsumedCapacity, AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)
batchGetItemAsync in interface AmazonDynamoDBAsyncbatchGetItemAsync(BatchGetItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<BatchGetItemResult> batchGetItemAsync(Map<String,KeysAndAttributes> requestItems)
batchGetItemAsync in interface AmazonDynamoDBAsyncbatchGetItemAsync(BatchGetItemRequest)public Future<BatchGetItemResult> batchGetItemAsync(Map<String,KeysAndAttributes> requestItems, AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)
batchGetItemAsync in interface AmazonDynamoDBAsyncbatchGetItemAsync(BatchGetItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<BatchWriteItemResult> batchWriteItemAsync(BatchWriteItemRequest request)
AmazonDynamoDBAsync
The BatchWriteItem operation puts or deletes multiple items in one or more tables. A single call to
BatchWriteItem can write up to 16 MB of data, which can comprise as many as 25 put or delete
requests. Individual items to be written can be as large as 400 KB.
BatchWriteItem cannot update items. To update items, use the UpdateItem action.
The individual PutItem and DeleteItem operations specified in
BatchWriteItem are atomic; however BatchWriteItem as a whole is not. If any requested
operations fail because the table's provisioned throughput is exceeded or an internal processing failure occurs,
the failed operations are returned in the UnprocessedItems response parameter. You can investigate
and optionally resend the requests. Typically, you would call BatchWriteItem in a loop. Each
iteration would check for unprocessed items and submit a new BatchWriteItem request with those
unprocessed items until all items have been processed.
Note that if none of the items can be processed due to insufficient provisioned throughput on all of the
tables in the request, then BatchWriteItem will return a
ProvisionedThroughputExceededException.
If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
With BatchWriteItem, you can efficiently write or delete large amounts of data, such as from Amazon
Elastic MapReduce (EMR), or copy data from another database into DynamoDB. In order to improve performance with
these large-scale operations, BatchWriteItem does not behave in the same way as individual
PutItem and DeleteItem calls would. For example, you cannot specify conditions on
individual put and delete requests, and BatchWriteItem does not return deleted items in the
response.
If you use a programming language that supports concurrency, you can use threads to write items in parallel. Your
application must include the necessary logic to manage the threads. With languages that don't support threading,
you must update or delete the specified items one at a time. In both situations, BatchWriteItem
performs the specified put and delete operations in parallel, giving you the power of the thread pool approach
without having to introduce complexity into your application.
Parallel processing reduces latency, but each specified put and delete request consumes the same number of write capacity units whether it is processed in parallel or not. Delete operations on nonexistent items consume one write capacity unit.
If one or more of the following is true, DynamoDB rejects the entire batch write operation:
One or more tables specified in the BatchWriteItem request does not exist.
Primary key attributes specified on an item in the request do not match those in the corresponding table's primary key schema.
You try to perform multiple operations on the same item in the same BatchWriteItem request. For
example, you cannot put and delete the same item in the same BatchWriteItem request.
There are more than 25 requests in the batch.
Any individual item in a batch exceeds 400 KB.
The total request size exceeds 16 MB.
batchWriteItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a BatchWriteItem operation.public Future<BatchWriteItemResult> batchWriteItemAsync(BatchWriteItemRequest request, AsyncHandler<BatchWriteItemRequest,BatchWriteItemResult> asyncHandler)
AmazonDynamoDBAsync
The BatchWriteItem operation puts or deletes multiple items in one or more tables. A single call to
BatchWriteItem can write up to 16 MB of data, which can comprise as many as 25 put or delete
requests. Individual items to be written can be as large as 400 KB.
BatchWriteItem cannot update items. To update items, use the UpdateItem action.
The individual PutItem and DeleteItem operations specified in
BatchWriteItem are atomic; however BatchWriteItem as a whole is not. If any requested
operations fail because the table's provisioned throughput is exceeded or an internal processing failure occurs,
the failed operations are returned in the UnprocessedItems response parameter. You can investigate
and optionally resend the requests. Typically, you would call BatchWriteItem in a loop. Each
iteration would check for unprocessed items and submit a new BatchWriteItem request with those
unprocessed items until all items have been processed.
Note that if none of the items can be processed due to insufficient provisioned throughput on all of the
tables in the request, then BatchWriteItem will return a
ProvisionedThroughputExceededException.
If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
With BatchWriteItem, you can efficiently write or delete large amounts of data, such as from Amazon
Elastic MapReduce (EMR), or copy data from another database into DynamoDB. In order to improve performance with
these large-scale operations, BatchWriteItem does not behave in the same way as individual
PutItem and DeleteItem calls would. For example, you cannot specify conditions on
individual put and delete requests, and BatchWriteItem does not return deleted items in the
response.
If you use a programming language that supports concurrency, you can use threads to write items in parallel. Your
application must include the necessary logic to manage the threads. With languages that don't support threading,
you must update or delete the specified items one at a time. In both situations, BatchWriteItem
performs the specified put and delete operations in parallel, giving you the power of the thread pool approach
without having to introduce complexity into your application.
Parallel processing reduces latency, but each specified put and delete request consumes the same number of write capacity units whether it is processed in parallel or not. Delete operations on nonexistent items consume one write capacity unit.
If one or more of the following is true, DynamoDB rejects the entire batch write operation:
One or more tables specified in the BatchWriteItem request does not exist.
Primary key attributes specified on an item in the request do not match those in the corresponding table's primary key schema.
You try to perform multiple operations on the same item in the same BatchWriteItem request. For
example, you cannot put and delete the same item in the same BatchWriteItem request.
There are more than 25 requests in the batch.
Any individual item in a batch exceeds 400 KB.
The total request size exceeds 16 MB.
batchWriteItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a BatchWriteItem operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<BatchWriteItemResult> batchWriteItemAsync(Map<String,List<WriteRequest>> requestItems)
batchWriteItemAsync in interface AmazonDynamoDBAsyncbatchWriteItemAsync(BatchWriteItemRequest)public Future<BatchWriteItemResult> batchWriteItemAsync(Map<String,List<WriteRequest>> requestItems, AsyncHandler<BatchWriteItemRequest,BatchWriteItemResult> asyncHandler)
batchWriteItemAsync in interface AmazonDynamoDBAsyncbatchWriteItemAsync(BatchWriteItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<CreateTableResult> createTableAsync(CreateTableRequest request)
AmazonDynamoDBAsync
The CreateTable operation adds a new table to your account. In an AWS account, table names must be
unique within each region. That is, you can have two tables with same name if you create the tables in different
regions.
CreateTable is an asynchronous operation. Upon receiving a CreateTable request,
DynamoDB immediately returns a response with a TableStatus of CREATING. After the table
is created, DynamoDB sets the TableStatus to ACTIVE. You can perform read and write
operations only on an ACTIVE table.
You can optionally define secondary indexes on the new table, as part of the CreateTable operation.
If you want to create multiple tables with secondary indexes on them, you must create the tables sequentially.
Only one table with secondary indexes can be in the CREATING state at any given time.
You can use the DescribeTable action to check the table status.
createTableAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a CreateTable operation.public Future<CreateTableResult> createTableAsync(CreateTableRequest request, AsyncHandler<CreateTableRequest,CreateTableResult> asyncHandler)
AmazonDynamoDBAsync
The CreateTable operation adds a new table to your account. In an AWS account, table names must be
unique within each region. That is, you can have two tables with same name if you create the tables in different
regions.
CreateTable is an asynchronous operation. Upon receiving a CreateTable request,
DynamoDB immediately returns a response with a TableStatus of CREATING. After the table
is created, DynamoDB sets the TableStatus to ACTIVE. You can perform read and write
operations only on an ACTIVE table.
You can optionally define secondary indexes on the new table, as part of the CreateTable operation.
If you want to create multiple tables with secondary indexes on them, you must create the tables sequentially.
Only one table with secondary indexes can be in the CREATING state at any given time.
You can use the DescribeTable action to check the table status.
createTableAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a CreateTable operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateTableResult> createTableAsync(List<AttributeDefinition> attributeDefinitions, String tableName, List<KeySchemaElement> keySchema, ProvisionedThroughput provisionedThroughput)
createTableAsync in interface AmazonDynamoDBAsynccreateTableAsync(CreateTableRequest)public Future<CreateTableResult> createTableAsync(List<AttributeDefinition> attributeDefinitions, String tableName, List<KeySchemaElement> keySchema, ProvisionedThroughput provisionedThroughput, AsyncHandler<CreateTableRequest,CreateTableResult> asyncHandler)
createTableAsync in interface AmazonDynamoDBAsynccreateTableAsync(CreateTableRequest, com.amazonaws.handlers.AsyncHandler)public Future<DeleteItemResult> deleteItemAsync(DeleteItemRequest request)
AmazonDynamoDBAsyncDeletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value.
In addition to deleting an item, you can also return the item's attribute values in the same operation, using the
ReturnValues parameter.
Unless you specify conditions, the DeleteItem is an idempotent operation; running it multiple times
on the same item or attribute does not result in an error response.
Conditional deletes are useful for deleting items only if specific conditions are met. If those conditions are met, DynamoDB performs the delete. Otherwise, the item is not deleted.
deleteItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a DeleteItem operation.public Future<DeleteItemResult> deleteItemAsync(DeleteItemRequest request, AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)
AmazonDynamoDBAsyncDeletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value.
In addition to deleting an item, you can also return the item's attribute values in the same operation, using the
ReturnValues parameter.
Unless you specify conditions, the DeleteItem is an idempotent operation; running it multiple times
on the same item or attribute does not result in an error response.
Conditional deletes are useful for deleting items only if specific conditions are met. If those conditions are met, DynamoDB performs the delete. Otherwise, the item is not deleted.
deleteItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a DeleteItem operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeleteItemResult> deleteItemAsync(String tableName, Map<String,AttributeValue> key)
deleteItemAsync in interface AmazonDynamoDBAsyncdeleteItemAsync(DeleteItemRequest)public Future<DeleteItemResult> deleteItemAsync(String tableName, Map<String,AttributeValue> key, AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)
deleteItemAsync in interface AmazonDynamoDBAsyncdeleteItemAsync(DeleteItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<DeleteItemResult> deleteItemAsync(String tableName, Map<String,AttributeValue> key, String returnValues)
deleteItemAsync in interface AmazonDynamoDBAsyncdeleteItemAsync(DeleteItemRequest)public Future<DeleteItemResult> deleteItemAsync(String tableName, Map<String,AttributeValue> key, String returnValues, AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)
deleteItemAsync in interface AmazonDynamoDBAsyncdeleteItemAsync(DeleteItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<DeleteTableResult> deleteTableAsync(DeleteTableRequest request)
AmazonDynamoDBAsync
The DeleteTable operation deletes a table and all of its items. After a DeleteTable
request, the specified table is in the DELETING state until DynamoDB completes the deletion. If the
table is in the ACTIVE state, you can delete it. If a table is in CREATING or
UPDATING states, then DynamoDB returns a ResourceInUseException. If the specified table
does not exist, DynamoDB returns a ResourceNotFoundException. If table is already in the
DELETING state, no error is returned.
DynamoDB might continue to accept data read and write operations, such as GetItem and
PutItem, on a table in the DELETING state until the table deletion is complete.
When you delete a table, any indexes on that table are also deleted.
If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes into the
DISABLED state, and the stream is automatically deleted after 24 hours.
Use the DescribeTable action to check the status of the table.
deleteTableAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a DeleteTable operation.public Future<DeleteTableResult> deleteTableAsync(DeleteTableRequest request, AsyncHandler<DeleteTableRequest,DeleteTableResult> asyncHandler)
AmazonDynamoDBAsync
The DeleteTable operation deletes a table and all of its items. After a DeleteTable
request, the specified table is in the DELETING state until DynamoDB completes the deletion. If the
table is in the ACTIVE state, you can delete it. If a table is in CREATING or
UPDATING states, then DynamoDB returns a ResourceInUseException. If the specified table
does not exist, DynamoDB returns a ResourceNotFoundException. If table is already in the
DELETING state, no error is returned.
DynamoDB might continue to accept data read and write operations, such as GetItem and
PutItem, on a table in the DELETING state until the table deletion is complete.
When you delete a table, any indexes on that table are also deleted.
If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes into the
DISABLED state, and the stream is automatically deleted after 24 hours.
Use the DescribeTable action to check the status of the table.
deleteTableAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a DeleteTable operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeleteTableResult> deleteTableAsync(String tableName)
deleteTableAsync in interface AmazonDynamoDBAsyncdeleteTableAsync(DeleteTableRequest)public Future<DeleteTableResult> deleteTableAsync(String tableName, AsyncHandler<DeleteTableRequest,DeleteTableResult> asyncHandler)
deleteTableAsync in interface AmazonDynamoDBAsyncdeleteTableAsync(DeleteTableRequest, com.amazonaws.handlers.AsyncHandler)public Future<DescribeLimitsResult> describeLimitsAsync(DescribeLimitsRequest request)
AmazonDynamoDBAsyncReturns the current provisioned-capacity limits for your AWS account in a region, both for the region as a whole and for any one DynamoDB table that you create there.
When you establish an AWS account, the account has initial limits on the maximum read capacity units and write capacity units that you can provision across all of your DynamoDB tables in a given region. Also, there are per-table limits that apply when you create a table there. For more information, see Limits page in the Amazon DynamoDB Developer Guide.
Although you can increase these limits by filing a case at AWS Support Center, obtaining the increase is not
instantaneous. The DescribeLimits action lets you write code to compare the capacity you are
currently using to those limits imposed by your account so that you have enough time to apply for an increase
before you hit a limit.
For example, you could use one of the AWS SDKs to do the following:
Call DescribeLimits for a particular region to obtain your current account limits on provisioned
capacity there.
Create a variable to hold the aggregate read capacity units provisioned for all your tables in that region, and one to hold the aggregate write capacity units. Zero them both.
Call ListTables to obtain a list of all your DynamoDB tables.
For each table name listed by ListTables, do the following:
Call DescribeTable with the table name.
Use the data returned by DescribeTable to add the read capacity units and write capacity units
provisioned for the table itself to your variables.
If the table has one or more global secondary indexes (GSIs), loop over these GSIs and add their provisioned capacity values to your variables as well.
Report the account limits for that region returned by DescribeLimits, along with the total current
provisioned capacity levels you have calculated.
This will let you see whether you are getting close to your account-level limits.
The per-table limits apply only when you are creating a new table. They restrict the sum of the provisioned capacity of the new table itself and all its global secondary indexes.
For existing tables and their GSIs, DynamoDB will not let you increase provisioned capacity extremely rapidly, but the only upper limit that applies is that the aggregate provisioned capacity over all your tables and GSIs cannot exceed either of the per-account limits.
DescribeLimits should only be called periodically. You can expect throttling errors if you call it
more than once in a minute.
The DescribeLimits Request element has no content.
describeLimitsAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a DescribeLimits operation. Has no content.public Future<DescribeLimitsResult> describeLimitsAsync(DescribeLimitsRequest request, AsyncHandler<DescribeLimitsRequest,DescribeLimitsResult> asyncHandler)
AmazonDynamoDBAsyncReturns the current provisioned-capacity limits for your AWS account in a region, both for the region as a whole and for any one DynamoDB table that you create there.
When you establish an AWS account, the account has initial limits on the maximum read capacity units and write capacity units that you can provision across all of your DynamoDB tables in a given region. Also, there are per-table limits that apply when you create a table there. For more information, see Limits page in the Amazon DynamoDB Developer Guide.
Although you can increase these limits by filing a case at AWS Support Center, obtaining the increase is not
instantaneous. The DescribeLimits action lets you write code to compare the capacity you are
currently using to those limits imposed by your account so that you have enough time to apply for an increase
before you hit a limit.
For example, you could use one of the AWS SDKs to do the following:
Call DescribeLimits for a particular region to obtain your current account limits on provisioned
capacity there.
Create a variable to hold the aggregate read capacity units provisioned for all your tables in that region, and one to hold the aggregate write capacity units. Zero them both.
Call ListTables to obtain a list of all your DynamoDB tables.
For each table name listed by ListTables, do the following:
Call DescribeTable with the table name.
Use the data returned by DescribeTable to add the read capacity units and write capacity units
provisioned for the table itself to your variables.
If the table has one or more global secondary indexes (GSIs), loop over these GSIs and add their provisioned capacity values to your variables as well.
Report the account limits for that region returned by DescribeLimits, along with the total current
provisioned capacity levels you have calculated.
This will let you see whether you are getting close to your account-level limits.
The per-table limits apply only when you are creating a new table. They restrict the sum of the provisioned capacity of the new table itself and all its global secondary indexes.
For existing tables and their GSIs, DynamoDB will not let you increase provisioned capacity extremely rapidly, but the only upper limit that applies is that the aggregate provisioned capacity over all your tables and GSIs cannot exceed either of the per-account limits.
DescribeLimits should only be called periodically. You can expect throttling errors if you call it
more than once in a minute.
The DescribeLimits Request element has no content.
describeLimitsAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a DescribeLimits operation. Has no content.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeTableResult> describeTableAsync(DescribeTableRequest request)
AmazonDynamoDBAsyncReturns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
If you issue a DescribeTable request immediately after a CreateTable request, DynamoDB
might return a ResourceNotFoundException. This is because DescribeTable uses an
eventually consistent query, and the metadata for your table might not be available at that moment. Wait for a
few seconds, and then try the DescribeTable request again.
describeTableAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a DescribeTable operation.public Future<DescribeTableResult> describeTableAsync(DescribeTableRequest request, AsyncHandler<DescribeTableRequest,DescribeTableResult> asyncHandler)
AmazonDynamoDBAsyncReturns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
If you issue a DescribeTable request immediately after a CreateTable request, DynamoDB
might return a ResourceNotFoundException. This is because DescribeTable uses an
eventually consistent query, and the metadata for your table might not be available at that moment. Wait for a
few seconds, and then try the DescribeTable request again.
describeTableAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a DescribeTable operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeTableResult> describeTableAsync(String tableName)
describeTableAsync in interface AmazonDynamoDBAsyncdescribeTableAsync(DescribeTableRequest)public Future<DescribeTableResult> describeTableAsync(String tableName, AsyncHandler<DescribeTableRequest,DescribeTableResult> asyncHandler)
describeTableAsync in interface AmazonDynamoDBAsyncdescribeTableAsync(DescribeTableRequest, com.amazonaws.handlers.AsyncHandler)public Future<DescribeTimeToLiveResult> describeTimeToLiveAsync(DescribeTimeToLiveRequest request)
AmazonDynamoDBAsyncGives a description of the Time to Live (TTL) status on the specified table.
describeTimeToLiveAsync in interface AmazonDynamoDBAsyncpublic Future<DescribeTimeToLiveResult> describeTimeToLiveAsync(DescribeTimeToLiveRequest request, AsyncHandler<DescribeTimeToLiveRequest,DescribeTimeToLiveResult> asyncHandler)
AmazonDynamoDBAsyncGives a description of the Time to Live (TTL) status on the specified table.
describeTimeToLiveAsync in interface AmazonDynamoDBAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<GetItemResult> getItemAsync(GetItemRequest request)
AmazonDynamoDBAsync
The GetItem operation returns a set of attributes for the item with the given primary key. If there
is no matching item, GetItem does not return any data and there will be no Item element
in the response.
GetItem provides an eventually consistent read by default. If your application requires a strongly
consistent read, set ConsistentRead to true. Although a strongly consistent read might
take more time than an eventually consistent read, it always returns the last updated value.
getItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a GetItem operation.public Future<GetItemResult> getItemAsync(GetItemRequest request, AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)
AmazonDynamoDBAsync
The GetItem operation returns a set of attributes for the item with the given primary key. If there
is no matching item, GetItem does not return any data and there will be no Item element
in the response.
GetItem provides an eventually consistent read by default. If your application requires a strongly
consistent read, set ConsistentRead to true. Although a strongly consistent read might
take more time than an eventually consistent read, it always returns the last updated value.
getItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a GetItem operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<GetItemResult> getItemAsync(String tableName, Map<String,AttributeValue> key)
getItemAsync in interface AmazonDynamoDBAsyncgetItemAsync(GetItemRequest)public Future<GetItemResult> getItemAsync(String tableName, Map<String,AttributeValue> key, AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)
getItemAsync in interface AmazonDynamoDBAsyncgetItemAsync(GetItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<GetItemResult> getItemAsync(String tableName, Map<String,AttributeValue> key, Boolean consistentRead)
getItemAsync in interface AmazonDynamoDBAsyncgetItemAsync(GetItemRequest)public Future<GetItemResult> getItemAsync(String tableName, Map<String,AttributeValue> key, Boolean consistentRead, AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)
getItemAsync in interface AmazonDynamoDBAsyncgetItemAsync(GetItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<ListTablesResult> listTablesAsync(ListTablesRequest request)
AmazonDynamoDBAsync
Returns an array of table names associated with the current account and endpoint. The output from
ListTables is paginated, with each page returning a maximum of 100 table names.
listTablesAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a ListTables operation.public Future<ListTablesResult> listTablesAsync(ListTablesRequest request, AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
AmazonDynamoDBAsync
Returns an array of table names associated with the current account and endpoint. The output from
ListTables is paginated, with each page returning a maximum of 100 table names.
listTablesAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a ListTables operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ListTablesResult> listTablesAsync()
listTablesAsync in interface AmazonDynamoDBAsynclistTablesAsync(ListTablesRequest)public Future<ListTablesResult> listTablesAsync(AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
listTablesAsync in interface AmazonDynamoDBAsynclistTablesAsync(ListTablesRequest, com.amazonaws.handlers.AsyncHandler)public Future<ListTablesResult> listTablesAsync(String exclusiveStartTableName)
listTablesAsync in interface AmazonDynamoDBAsynclistTablesAsync(ListTablesRequest)public Future<ListTablesResult> listTablesAsync(String exclusiveStartTableName, AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
listTablesAsync in interface AmazonDynamoDBAsynclistTablesAsync(ListTablesRequest, com.amazonaws.handlers.AsyncHandler)public Future<ListTablesResult> listTablesAsync(String exclusiveStartTableName, Integer limit)
listTablesAsync in interface AmazonDynamoDBAsynclistTablesAsync(ListTablesRequest)public Future<ListTablesResult> listTablesAsync(String exclusiveStartTableName, Integer limit, AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
listTablesAsync in interface AmazonDynamoDBAsynclistTablesAsync(ListTablesRequest, com.amazonaws.handlers.AsyncHandler)public Future<ListTablesResult> listTablesAsync(Integer limit)
listTablesAsync in interface AmazonDynamoDBAsynclistTablesAsync(ListTablesRequest)public Future<ListTablesResult> listTablesAsync(Integer limit, AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
listTablesAsync in interface AmazonDynamoDBAsynclistTablesAsync(ListTablesRequest, com.amazonaws.handlers.AsyncHandler)public Future<ListTagsOfResourceResult> listTagsOfResourceAsync(ListTagsOfResourceRequest request)
AmazonDynamoDBAsyncList all tags on an Amazon DynamoDB resource. You can call ListTagsOfResource up to 10 times per second, per account.
For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
listTagsOfResourceAsync in interface AmazonDynamoDBAsyncpublic Future<ListTagsOfResourceResult> listTagsOfResourceAsync(ListTagsOfResourceRequest request, AsyncHandler<ListTagsOfResourceRequest,ListTagsOfResourceResult> asyncHandler)
AmazonDynamoDBAsyncList all tags on an Amazon DynamoDB resource. You can call ListTagsOfResource up to 10 times per second, per account.
For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
listTagsOfResourceAsync in interface AmazonDynamoDBAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<PutItemResult> putItemAsync(PutItemRequest request)
AmazonDynamoDBAsyncCreates a new item, or replaces an old item with a new item. If an item that has the same primary key as the new item already exists in the specified table, the new item completely replaces the existing item. You can perform a conditional put operation (add a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values.
In addition to putting an item, you can also return the item's attribute values in the same operation, using the
ReturnValues parameter.
When you add an item, the primary key attribute(s) are the only required attributes. Attribute values cannot be
null. String and Binary type attributes must have lengths greater than zero. Set type attributes cannot be empty.
Requests with empty values will be rejected with a ValidationException exception.
To prevent a new item from replacing an existing item, use a conditional expression that contains the
attribute_not_exists function with the name of the attribute being used as the partition key for the
table. Since every record must contain that attribute, the attribute_not_exists function will only
succeed if no matching item exists.
For more information about PutItem, see Working with
Items in the Amazon DynamoDB Developer Guide.
putItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a PutItem operation.public Future<PutItemResult> putItemAsync(PutItemRequest request, AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)
AmazonDynamoDBAsyncCreates a new item, or replaces an old item with a new item. If an item that has the same primary key as the new item already exists in the specified table, the new item completely replaces the existing item. You can perform a conditional put operation (add a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values.
In addition to putting an item, you can also return the item's attribute values in the same operation, using the
ReturnValues parameter.
When you add an item, the primary key attribute(s) are the only required attributes. Attribute values cannot be
null. String and Binary type attributes must have lengths greater than zero. Set type attributes cannot be empty.
Requests with empty values will be rejected with a ValidationException exception.
To prevent a new item from replacing an existing item, use a conditional expression that contains the
attribute_not_exists function with the name of the attribute being used as the partition key for the
table. Since every record must contain that attribute, the attribute_not_exists function will only
succeed if no matching item exists.
For more information about PutItem, see Working with
Items in the Amazon DynamoDB Developer Guide.
putItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a PutItem operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<PutItemResult> putItemAsync(String tableName, Map<String,AttributeValue> item)
putItemAsync in interface AmazonDynamoDBAsyncputItemAsync(PutItemRequest)public Future<PutItemResult> putItemAsync(String tableName, Map<String,AttributeValue> item, AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)
putItemAsync in interface AmazonDynamoDBAsyncputItemAsync(PutItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<PutItemResult> putItemAsync(String tableName, Map<String,AttributeValue> item, String returnValues)
putItemAsync in interface AmazonDynamoDBAsyncputItemAsync(PutItemRequest)public Future<PutItemResult> putItemAsync(String tableName, Map<String,AttributeValue> item, String returnValues, AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)
putItemAsync in interface AmazonDynamoDBAsyncputItemAsync(PutItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<QueryResult> queryAsync(QueryRequest request)
AmazonDynamoDBAsync
A Query operation uses the primary key of a table or a secondary index to directly access items from
that table or index.
Use the KeyConditionExpression parameter to provide a specific value for the partition key. The
Query operation will return all of the items from the table or index with that partition key value.
You can optionally narrow the scope of the Query operation by specifying a sort key value and a
comparison operator in KeyConditionExpression. You can use the ScanIndexForward
parameter to get results in forward or reverse order, by sort key.
Queries that do not return results consume the minimum number of read capacity units for that type of read operation.
If the total number of items meeting the query criteria exceeds the result set size limit of 1 MB, the query
stops and results are returned to the user with the LastEvaluatedKey element to continue the query
in a subsequent operation. Unlike a Scan operation, a Query operation never returns
both an empty result set and a LastEvaluatedKey value. LastEvaluatedKey is only
provided if you have used the Limit parameter, or if the result set exceeds 1 MB (prior to applying
a filter).
You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local
secondary index, you can set the ConsistentRead parameter to true and obtain a strongly
consistent result. Global secondary indexes support eventually consistent reads only, so do not specify
ConsistentRead when querying a global secondary index.
queryAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a Query operation.public Future<QueryResult> queryAsync(QueryRequest request, AsyncHandler<QueryRequest,QueryResult> asyncHandler)
AmazonDynamoDBAsync
A Query operation uses the primary key of a table or a secondary index to directly access items from
that table or index.
Use the KeyConditionExpression parameter to provide a specific value for the partition key. The
Query operation will return all of the items from the table or index with that partition key value.
You can optionally narrow the scope of the Query operation by specifying a sort key value and a
comparison operator in KeyConditionExpression. You can use the ScanIndexForward
parameter to get results in forward or reverse order, by sort key.
Queries that do not return results consume the minimum number of read capacity units for that type of read operation.
If the total number of items meeting the query criteria exceeds the result set size limit of 1 MB, the query
stops and results are returned to the user with the LastEvaluatedKey element to continue the query
in a subsequent operation. Unlike a Scan operation, a Query operation never returns
both an empty result set and a LastEvaluatedKey value. LastEvaluatedKey is only
provided if you have used the Limit parameter, or if the result set exceeds 1 MB (prior to applying
a filter).
You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local
secondary index, you can set the ConsistentRead parameter to true and obtain a strongly
consistent result. Global secondary indexes support eventually consistent reads only, so do not specify
ConsistentRead when querying a global secondary index.
queryAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a Query operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ScanResult> scanAsync(ScanRequest request)
AmazonDynamoDBAsync
The Scan operation returns one or more items and item attributes by accessing every item in a table
or a secondary index. To have DynamoDB return fewer items, you can provide a FilterExpression
operation.
If the total number of scanned items exceeds the maximum data set size limit of 1 MB, the scan stops and results
are returned to the user as a LastEvaluatedKey value to continue the scan in a subsequent operation.
The results also include the number of items exceeding the limit. A scan can result in no table data meeting the
filter criteria.
By default, Scan operations proceed sequentially; however, for faster performance on a large table
or secondary index, applications can request a parallel Scan operation by providing the
Segment and TotalSegments parameters. For more information, see Parallel Scan in the Amazon DynamoDB Developer Guide.
By default, Scan uses eventually consistent reads when accessing the data in a table; therefore, the
result set might not include the changes to data in the table immediately before the operation began. If you need
a consistent copy of the data, as of the time that the Scan begins, you can set the ConsistentRead
parameter to true.
scanAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a Scan operation.public Future<ScanResult> scanAsync(ScanRequest request, AsyncHandler<ScanRequest,ScanResult> asyncHandler)
AmazonDynamoDBAsync
The Scan operation returns one or more items and item attributes by accessing every item in a table
or a secondary index. To have DynamoDB return fewer items, you can provide a FilterExpression
operation.
If the total number of scanned items exceeds the maximum data set size limit of 1 MB, the scan stops and results
are returned to the user as a LastEvaluatedKey value to continue the scan in a subsequent operation.
The results also include the number of items exceeding the limit. A scan can result in no table data meeting the
filter criteria.
By default, Scan operations proceed sequentially; however, for faster performance on a large table
or secondary index, applications can request a parallel Scan operation by providing the
Segment and TotalSegments parameters. For more information, see Parallel Scan in the Amazon DynamoDB Developer Guide.
By default, Scan uses eventually consistent reads when accessing the data in a table; therefore, the
result set might not include the changes to data in the table immediately before the operation began. If you need
a consistent copy of the data, as of the time that the Scan begins, you can set the ConsistentRead
parameter to true.
scanAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of a Scan operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ScanResult> scanAsync(String tableName, List<String> attributesToGet)
scanAsync in interface AmazonDynamoDBAsyncscanAsync(ScanRequest)public Future<ScanResult> scanAsync(String tableName, List<String> attributesToGet, AsyncHandler<ScanRequest,ScanResult> asyncHandler)
scanAsync in interface AmazonDynamoDBAsyncscanAsync(ScanRequest, com.amazonaws.handlers.AsyncHandler)public Future<ScanResult> scanAsync(String tableName, Map<String,Condition> scanFilter)
scanAsync in interface AmazonDynamoDBAsyncscanAsync(ScanRequest)public Future<ScanResult> scanAsync(String tableName, Map<String,Condition> scanFilter, AsyncHandler<ScanRequest,ScanResult> asyncHandler)
scanAsync in interface AmazonDynamoDBAsyncscanAsync(ScanRequest, com.amazonaws.handlers.AsyncHandler)public Future<ScanResult> scanAsync(String tableName, List<String> attributesToGet, Map<String,Condition> scanFilter)
scanAsync in interface AmazonDynamoDBAsyncscanAsync(ScanRequest)public Future<ScanResult> scanAsync(String tableName, List<String> attributesToGet, Map<String,Condition> scanFilter, AsyncHandler<ScanRequest,ScanResult> asyncHandler)
scanAsync in interface AmazonDynamoDBAsyncscanAsync(ScanRequest, com.amazonaws.handlers.AsyncHandler)public Future<TagResourceResult> tagResourceAsync(TagResourceRequest request)
AmazonDynamoDBAsyncAssociate a set of tags with an Amazon DynamoDB resource. You can then activate these user-defined tags so that they appear on the Billing and Cost Management console for cost allocation tracking. You can call TagResource up to 5 times per second, per account.
For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
tagResourceAsync in interface AmazonDynamoDBAsyncpublic Future<TagResourceResult> tagResourceAsync(TagResourceRequest request, AsyncHandler<TagResourceRequest,TagResourceResult> asyncHandler)
AmazonDynamoDBAsyncAssociate a set of tags with an Amazon DynamoDB resource. You can then activate these user-defined tags so that they appear on the Billing and Cost Management console for cost allocation tracking. You can call TagResource up to 5 times per second, per account.
For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
tagResourceAsync in interface AmazonDynamoDBAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UntagResourceResult> untagResourceAsync(UntagResourceRequest request)
AmazonDynamoDBAsyncRemoves the association of tags from an Amazon DynamoDB resource. You can call UntagResource up to 5 times per second, per account.
For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
untagResourceAsync in interface AmazonDynamoDBAsyncpublic Future<UntagResourceResult> untagResourceAsync(UntagResourceRequest request, AsyncHandler<UntagResourceRequest,UntagResourceResult> asyncHandler)
AmazonDynamoDBAsyncRemoves the association of tags from an Amazon DynamoDB resource. You can call UntagResource up to 5 times per second, per account.
For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
untagResourceAsync in interface AmazonDynamoDBAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateItemResult> updateItemAsync(UpdateItemRequest request)
AmazonDynamoDBAsyncEdits an existing item's attributes, or adds a new item to the table if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update on an existing item (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).
You can also return the item's attribute values in the same UpdateItem operation using the
ReturnValues parameter.
updateItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of an UpdateItem operation.public Future<UpdateItemResult> updateItemAsync(UpdateItemRequest request, AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)
AmazonDynamoDBAsyncEdits an existing item's attributes, or adds a new item to the table if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update on an existing item (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).
You can also return the item's attribute values in the same UpdateItem operation using the
ReturnValues parameter.
updateItemAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of an UpdateItem operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateItemResult> updateItemAsync(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates)
updateItemAsync in interface AmazonDynamoDBAsyncupdateItemAsync(UpdateItemRequest)public Future<UpdateItemResult> updateItemAsync(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates, AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)
updateItemAsync in interface AmazonDynamoDBAsyncupdateItemAsync(UpdateItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<UpdateItemResult> updateItemAsync(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates, String returnValues)
updateItemAsync in interface AmazonDynamoDBAsyncupdateItemAsync(UpdateItemRequest)public Future<UpdateItemResult> updateItemAsync(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates, String returnValues, AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)
updateItemAsync in interface AmazonDynamoDBAsyncupdateItemAsync(UpdateItemRequest, com.amazonaws.handlers.AsyncHandler)public Future<UpdateTableResult> updateTableAsync(UpdateTableRequest request)
AmazonDynamoDBAsyncModifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.
You can only perform one of the following operations at once:
Modify the provisioned throughput settings of the table.
Enable or disable Streams on the table.
Remove a global secondary index from the table.
Create a new global secondary index on the table. Once the index begins backfilling, you can use
UpdateTable to perform other operations.
UpdateTable is an asynchronous operation; while it is executing, the table status changes from
ACTIVE to UPDATING. While it is UPDATING, you cannot issue another
UpdateTable request. When the table returns to the ACTIVE state, the
UpdateTable operation is complete.
updateTableAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of an UpdateTable operation.public Future<UpdateTableResult> updateTableAsync(UpdateTableRequest request, AsyncHandler<UpdateTableRequest,UpdateTableResult> asyncHandler)
AmazonDynamoDBAsyncModifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.
You can only perform one of the following operations at once:
Modify the provisioned throughput settings of the table.
Enable or disable Streams on the table.
Remove a global secondary index from the table.
Create a new global secondary index on the table. Once the index begins backfilling, you can use
UpdateTable to perform other operations.
UpdateTable is an asynchronous operation; while it is executing, the table status changes from
ACTIVE to UPDATING. While it is UPDATING, you cannot issue another
UpdateTable request. When the table returns to the ACTIVE state, the
UpdateTable operation is complete.
updateTableAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of an UpdateTable operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateTableResult> updateTableAsync(String tableName, ProvisionedThroughput provisionedThroughput)
updateTableAsync in interface AmazonDynamoDBAsyncupdateTableAsync(UpdateTableRequest)public Future<UpdateTableResult> updateTableAsync(String tableName, ProvisionedThroughput provisionedThroughput, AsyncHandler<UpdateTableRequest,UpdateTableResult> asyncHandler)
updateTableAsync in interface AmazonDynamoDBAsyncupdateTableAsync(UpdateTableRequest, com.amazonaws.handlers.AsyncHandler)public Future<UpdateTimeToLiveResult> updateTimeToLiveAsync(UpdateTimeToLiveRequest request)
AmazonDynamoDBAsync
Specify the lifetime of individual table items. The database automatically removes the item at the expiration of
the item. The UpdateTimeToLive method will enable or disable TTL for the specified table. A successful
UpdateTimeToLive call returns the current TimeToLiveSpecification; it may take up to
one hour for the change to fully process.
TTL compares the current time in epoch time format to the time stored in the TTL attribute of an item. If the epoch time value stored in the attribute is less than the current time, the item is marked as expired and subsequently deleted.
The epoch time format is the number of seconds elapsed since 12:00:00 AM January 1st, 1970 UTC.
DynamoDB deletes expired items on a best-effort basis to ensure availability of throughput for other data operations.
DynamoDB typically deletes expired items within two days of expiration. The exact duration within which an item gets deleted after expiration is specific to the nature of the workload. Items that have expired and not been deleted will still show up in reads, queries, and scans.
As items are deleted, they are removed from any Local Secondary Index and Global Secondary Index immediately in the same eventually consistent way as a standard delete operation.
For more information, see Time To Live in the Amazon DynamoDB Developer Guide.
updateTimeToLiveAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of an UpdateTimeToLive operation.public Future<UpdateTimeToLiveResult> updateTimeToLiveAsync(UpdateTimeToLiveRequest request, AsyncHandler<UpdateTimeToLiveRequest,UpdateTimeToLiveResult> asyncHandler)
AmazonDynamoDBAsync
Specify the lifetime of individual table items. The database automatically removes the item at the expiration of
the item. The UpdateTimeToLive method will enable or disable TTL for the specified table. A successful
UpdateTimeToLive call returns the current TimeToLiveSpecification; it may take up to
one hour for the change to fully process.
TTL compares the current time in epoch time format to the time stored in the TTL attribute of an item. If the epoch time value stored in the attribute is less than the current time, the item is marked as expired and subsequently deleted.
The epoch time format is the number of seconds elapsed since 12:00:00 AM January 1st, 1970 UTC.
DynamoDB deletes expired items on a best-effort basis to ensure availability of throughput for other data operations.
DynamoDB typically deletes expired items within two days of expiration. The exact duration within which an item gets deleted after expiration is specific to the nature of the workload. Items that have expired and not been deleted will still show up in reads, queries, and scans.
As items are deleted, they are removed from any Local Secondary Index and Global Secondary Index immediately in the same eventually consistent way as a standard delete operation.
For more information, see Time To Live in the Amazon DynamoDB Developer Guide.
updateTimeToLiveAsync in interface AmazonDynamoDBAsyncrequest - Represents the input of an UpdateTimeToLive operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public void shutdown()
getExecutorService().shutdown() followed by getExecutorService().awaitTermination() prior to
calling this method.shutdown in interface AmazonDynamoDBshutdown in class AmazonDynamoDBClientCopyright © 2017. All rights reserved.