AmazonDynamoDBAsyncClient (AWS Java SDK for Amazon DynamoDB 1.12.96 API)

java.lang.Object
- com.amazonaws.AmazonWebServiceClient
- - com.amazonaws.services.dynamodbv2.AmazonDynamoDBClient
  - - com.amazonaws.services.dynamodbv2.AmazonDynamoDBAsyncClient

All Implemented Interfaces:

AmazonDynamoDB, AmazonDynamoDBAsync
```
@ThreadSafe
 @Generated(value="com.amazonaws:aws-java-sdk-code-generator")
public class AmazonDynamoDBAsyncClient
extends AmazonDynamoDBClient
implements AmazonDynamoDBAsync
```
Client for accessing DynamoDB asynchronously. Each asynchronous method will return a Java Future object representing the asynchronous operation; overloads which accept an AsyncHandler can be used to receive notification when an asynchronous operation completes.
Amazon DynamoDB
Amazon DynamoDB is a fully managed NoSQL database service that provides fast and predictable performance with seamless scalability. DynamoDB lets you offload the administrative burdens of operating and scaling a distributed database, so that you don't have to worry about hardware provisioning, setup and configuration, replication, software patching, or cluster scaling.

With DynamoDB, you can create database tables that can store and retrieve any amount of data, and serve any level of request traffic. You can scale up or scale down your tables' throughput capacity without downtime or performance degradation, and use the AWS Management Console to monitor resource utilization and performance metrics.

DynamoDB automatically spreads the data and traffic for your tables over a sufficient number of servers to handle your throughput and storage requirements, while maintaining consistent and fast performance. All of your data is stored on solid state disks (SSDs) and automatically replicated across multiple Availability Zones in an AWS region, providing built-in high availability and data durability.

Field Summary
- Fields inherited from class com.amazonaws.services.dynamodbv2.AmazonDynamoDBClient
  cache, configFactory
- Fields inherited from class com.amazonaws.AmazonWebServiceClient
  client, clientConfiguration, endpoint, isEndpointOverridden, LOGGING_AWS_REQUEST_METRIC, requestHandler2s, timeOffset
- Fields inherited from interface com.amazonaws.services.dynamodbv2.AmazonDynamoDB
  ENDPOINT_PREFIX

Constructor Summary

Constructors
Constructor and Description
`AmazonDynamoDBAsyncClient()` Deprecated. use `AmazonDynamoDBAsyncClientBuilder.defaultClient()`
`AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials)` Deprecated. use `AwsClientBuilder.withCredentials(AWSCredentialsProvider)`
`AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials, ClientConfiguration clientConfiguration, ExecutorService executorService)` Deprecated. use `AwsClientBuilder.withCredentials(AWSCredentialsProvider)` and `AwsClientBuilder.withClientConfiguration(ClientConfiguration)` and `AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)`
`AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials, ExecutorService executorService)` Deprecated. use `AwsClientBuilder.withCredentials(AWSCredentialsProvider)` and `AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)`
`AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider)` Deprecated. use `AwsClientBuilder.withCredentials(AWSCredentialsProvider)`
`AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration)` Deprecated. use `AwsClientBuilder.withCredentials(AWSCredentialsProvider)` and `AwsClientBuilder.withClientConfiguration(ClientConfiguration)`
`AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration, ExecutorService executorService)` Deprecated. use `AwsClientBuilder.withCredentials(AWSCredentialsProvider)` and `AwsClientBuilder.withClientConfiguration(ClientConfiguration)` and `AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)`
`AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ExecutorService executorService)` Deprecated. use `AwsClientBuilder.withCredentials(AWSCredentialsProvider)` and `AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)`
`AmazonDynamoDBAsyncClient(ClientConfiguration clientConfiguration)` Deprecated. use `AwsClientBuilder.withClientConfiguration(ClientConfiguration)`

Method Summary

All Methods Static Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`static AmazonDynamoDBAsyncClientBuilder`	`asyncBuilder()`
`Future<BatchExecuteStatementResult>`	`batchExecuteStatementAsync(BatchExecuteStatementRequest request)` This operation allows you to perform batch reads and writes on data stored in DynamoDB, using PartiQL.
`Future<BatchExecuteStatementResult>`	`batchExecuteStatementAsync(BatchExecuteStatementRequest request, AsyncHandler<BatchExecuteStatementRequest,BatchExecuteStatementResult> asyncHandler)` This operation allows you to perform batch reads and writes on data stored in DynamoDB, using PartiQL.
`Future<BatchGetItemResult>`	`batchGetItemAsync(BatchGetItemRequest request)` The `BatchGetItem` operation returns the attributes of one or more items from one or more tables.
`Future<BatchGetItemResult>`	`batchGetItemAsync(BatchGetItemRequest request, AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)` The `BatchGetItem` operation returns the attributes of one or more items from one or more tables.
`Future<BatchGetItemResult>`	`batchGetItemAsync(Map<String,KeysAndAttributes> requestItems)` Simplified method form for invoking the BatchGetItem operation.
`Future<BatchGetItemResult>`	`batchGetItemAsync(Map<String,KeysAndAttributes> requestItems, AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)` Simplified method form for invoking the BatchGetItem operation with an AsyncHandler.
`Future<BatchGetItemResult>`	`batchGetItemAsync(Map<String,KeysAndAttributes> requestItems, String returnConsumedCapacity)` Simplified method form for invoking the BatchGetItem operation.
`Future<BatchGetItemResult>`	`batchGetItemAsync(Map<String,KeysAndAttributes> requestItems, String returnConsumedCapacity, AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)` Simplified method form for invoking the BatchGetItem operation with an AsyncHandler.
`Future<BatchWriteItemResult>`	`batchWriteItemAsync(BatchWriteItemRequest request)` The `BatchWriteItem` operation puts or deletes multiple items in one or more tables.
`Future<BatchWriteItemResult>`	`batchWriteItemAsync(BatchWriteItemRequest request, AsyncHandler<BatchWriteItemRequest,BatchWriteItemResult> asyncHandler)` The `BatchWriteItem` operation puts or deletes multiple items in one or more tables.
`Future<BatchWriteItemResult>`	`batchWriteItemAsync(Map<String,List<WriteRequest>> requestItems)` Simplified method form for invoking the BatchWriteItem operation.
`Future<BatchWriteItemResult>`	`batchWriteItemAsync(Map<String,List<WriteRequest>> requestItems, AsyncHandler<BatchWriteItemRequest,BatchWriteItemResult> asyncHandler)` Simplified method form for invoking the BatchWriteItem operation with an AsyncHandler.
`Future<CreateBackupResult>`	`createBackupAsync(CreateBackupRequest request)` Creates a backup for an existing table.
`Future<CreateBackupResult>`	`createBackupAsync(CreateBackupRequest request, AsyncHandler<CreateBackupRequest,CreateBackupResult> asyncHandler)` Creates a backup for an existing table.
`Future<CreateGlobalTableResult>`	`createGlobalTableAsync(CreateGlobalTableRequest request)` Creates a global table from an existing table.
`Future<CreateGlobalTableResult>`	`createGlobalTableAsync(CreateGlobalTableRequest request, AsyncHandler<CreateGlobalTableRequest,CreateGlobalTableResult> asyncHandler)` Creates a global table from an existing table.
`Future<CreateTableResult>`	`createTableAsync(CreateTableRequest request)` The `CreateTable` operation adds a new table to your account.
`Future<CreateTableResult>`	`createTableAsync(CreateTableRequest request, AsyncHandler<CreateTableRequest,CreateTableResult> asyncHandler)` The `CreateTable` operation adds a new table to your account.
`Future<CreateTableResult>`	`createTableAsync(List<AttributeDefinition> attributeDefinitions, String tableName, List<KeySchemaElement> keySchema, ProvisionedThroughput provisionedThroughput)` Simplified method form for invoking the CreateTable operation.
`Future<CreateTableResult>`	`createTableAsync(List<AttributeDefinition> attributeDefinitions, String tableName, List<KeySchemaElement> keySchema, ProvisionedThroughput provisionedThroughput, AsyncHandler<CreateTableRequest,CreateTableResult> asyncHandler)` Simplified method form for invoking the CreateTable operation with an AsyncHandler.
`Future<DeleteBackupResult>`	`deleteBackupAsync(DeleteBackupRequest request)` Deletes an existing backup of a table.
`Future<DeleteBackupResult>`	`deleteBackupAsync(DeleteBackupRequest request, AsyncHandler<DeleteBackupRequest,DeleteBackupResult> asyncHandler)` Deletes an existing backup of a table.
`Future<DeleteItemResult>`	`deleteItemAsync(DeleteItemRequest request)` Deletes a single item in a table by primary key.
`Future<DeleteItemResult>`	`deleteItemAsync(DeleteItemRequest request, AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)` Deletes a single item in a table by primary key.
`Future<DeleteItemResult>`	`deleteItemAsync(String tableName, Map<String,AttributeValue> key)` Simplified method form for invoking the DeleteItem operation.
`Future<DeleteItemResult>`	`deleteItemAsync(String tableName, Map<String,AttributeValue> key, AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)` Simplified method form for invoking the DeleteItem operation with an AsyncHandler.
`Future<DeleteItemResult>`	`deleteItemAsync(String tableName, Map<String,AttributeValue> key, String returnValues)` Simplified method form for invoking the DeleteItem operation.
`Future<DeleteItemResult>`	`deleteItemAsync(String tableName, Map<String,AttributeValue> key, String returnValues, AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)` Simplified method form for invoking the DeleteItem operation with an AsyncHandler.
`Future<DeleteTableResult>`	`deleteTableAsync(DeleteTableRequest request)` The `DeleteTable` operation deletes a table and all of its items.
`Future<DeleteTableResult>`	`deleteTableAsync(DeleteTableRequest request, AsyncHandler<DeleteTableRequest,DeleteTableResult> asyncHandler)` The `DeleteTable` operation deletes a table and all of its items.
`Future<DeleteTableResult>`	`deleteTableAsync(String tableName)` Simplified method form for invoking the DeleteTable operation.
`Future<DeleteTableResult>`	`deleteTableAsync(String tableName, AsyncHandler<DeleteTableRequest,DeleteTableResult> asyncHandler)` Simplified method form for invoking the DeleteTable operation with an AsyncHandler.
`Future<DescribeBackupResult>`	`describeBackupAsync(DescribeBackupRequest request)` Describes an existing backup of a table.
`Future<DescribeBackupResult>`	`describeBackupAsync(DescribeBackupRequest request, AsyncHandler<DescribeBackupRequest,DescribeBackupResult> asyncHandler)` Describes an existing backup of a table.
`Future<DescribeContinuousBackupsResult>`	`describeContinuousBackupsAsync(DescribeContinuousBackupsRequest request)` Checks the status of continuous backups and point in time recovery on the specified table.
`Future<DescribeContinuousBackupsResult>`	`describeContinuousBackupsAsync(DescribeContinuousBackupsRequest request, AsyncHandler<DescribeContinuousBackupsRequest,DescribeContinuousBackupsResult> asyncHandler)` Checks the status of continuous backups and point in time recovery on the specified table.
`Future<DescribeContributorInsightsResult>`	`describeContributorInsightsAsync(DescribeContributorInsightsRequest request)` Returns information about contributor insights, for a given table or global secondary index.
`Future<DescribeContributorInsightsResult>`	`describeContributorInsightsAsync(DescribeContributorInsightsRequest request, AsyncHandler<DescribeContributorInsightsRequest,DescribeContributorInsightsResult> asyncHandler)` Returns information about contributor insights, for a given table or global secondary index.
`Future<DescribeEndpointsResult>`	`describeEndpointsAsync(DescribeEndpointsRequest request)` Returns the regional endpoint information.
`Future<DescribeEndpointsResult>`	`describeEndpointsAsync(DescribeEndpointsRequest request, AsyncHandler<DescribeEndpointsRequest,DescribeEndpointsResult> asyncHandler)` Returns the regional endpoint information.
`Future<DescribeExportResult>`	`describeExportAsync(DescribeExportRequest request)` Describes an existing table export.
`Future<DescribeExportResult>`	`describeExportAsync(DescribeExportRequest request, AsyncHandler<DescribeExportRequest,DescribeExportResult> asyncHandler)` Describes an existing table export.
`Future<DescribeGlobalTableResult>`	`describeGlobalTableAsync(DescribeGlobalTableRequest request)` Returns information about the specified global table.
`Future<DescribeGlobalTableResult>`	`describeGlobalTableAsync(DescribeGlobalTableRequest request, AsyncHandler<DescribeGlobalTableRequest,DescribeGlobalTableResult> asyncHandler)` Returns information about the specified global table.
`Future<DescribeGlobalTableSettingsResult>`	`describeGlobalTableSettingsAsync(DescribeGlobalTableSettingsRequest request)` Describes Region-specific settings for a global table.
`Future<DescribeGlobalTableSettingsResult>`	`describeGlobalTableSettingsAsync(DescribeGlobalTableSettingsRequest request, AsyncHandler<DescribeGlobalTableSettingsRequest,DescribeGlobalTableSettingsResult> asyncHandler)` Describes Region-specific settings for a global table.
`Future<DescribeKinesisStreamingDestinationResult>`	`describeKinesisStreamingDestinationAsync(DescribeKinesisStreamingDestinationRequest request)` Returns information about the status of Kinesis streaming.
`Future<DescribeKinesisStreamingDestinationResult>`	`describeKinesisStreamingDestinationAsync(DescribeKinesisStreamingDestinationRequest request, AsyncHandler<DescribeKinesisStreamingDestinationRequest,DescribeKinesisStreamingDestinationResult> asyncHandler)` Returns information about the status of Kinesis streaming.
`Future<DescribeLimitsResult>`	`describeLimitsAsync(DescribeLimitsRequest request)` Returns the current provisioned-capacity quotas for your AWS account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there.
`Future<DescribeLimitsResult>`	`describeLimitsAsync(DescribeLimitsRequest request, AsyncHandler<DescribeLimitsRequest,DescribeLimitsResult> asyncHandler)` Returns the current provisioned-capacity quotas for your AWS account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there.
`Future<DescribeTableResult>`	`describeTableAsync(DescribeTableRequest request)` Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
`Future<DescribeTableResult>`	`describeTableAsync(DescribeTableRequest request, AsyncHandler<DescribeTableRequest,DescribeTableResult> asyncHandler)` Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
`Future<DescribeTableResult>`	`describeTableAsync(String tableName)` Simplified method form for invoking the DescribeTable operation.
`Future<DescribeTableResult>`	`describeTableAsync(String tableName, AsyncHandler<DescribeTableRequest,DescribeTableResult> asyncHandler)` Simplified method form for invoking the DescribeTable operation with an AsyncHandler.
`Future<DescribeTableReplicaAutoScalingResult>`	`describeTableReplicaAutoScalingAsync(DescribeTableReplicaAutoScalingRequest request)` Describes auto scaling settings across replicas of the global table at once.
`Future<DescribeTableReplicaAutoScalingResult>`	`describeTableReplicaAutoScalingAsync(DescribeTableReplicaAutoScalingRequest request, AsyncHandler<DescribeTableReplicaAutoScalingRequest,DescribeTableReplicaAutoScalingResult> asyncHandler)` Describes auto scaling settings across replicas of the global table at once.
`Future<DescribeTimeToLiveResult>`	`describeTimeToLiveAsync(DescribeTimeToLiveRequest request)` Gives a description of the Time to Live (TTL) status on the specified table.
`Future<DescribeTimeToLiveResult>`	`describeTimeToLiveAsync(DescribeTimeToLiveRequest request, AsyncHandler<DescribeTimeToLiveRequest,DescribeTimeToLiveResult> asyncHandler)` Gives a description of the Time to Live (TTL) status on the specified table.
`Future<DisableKinesisStreamingDestinationResult>`	`disableKinesisStreamingDestinationAsync(DisableKinesisStreamingDestinationRequest request)` Stops replication from the DynamoDB table to the Kinesis data stream.
`Future<DisableKinesisStreamingDestinationResult>`	`disableKinesisStreamingDestinationAsync(DisableKinesisStreamingDestinationRequest request, AsyncHandler<DisableKinesisStreamingDestinationRequest,DisableKinesisStreamingDestinationResult> asyncHandler)` Stops replication from the DynamoDB table to the Kinesis data stream.
`Future<EnableKinesisStreamingDestinationResult>`	`enableKinesisStreamingDestinationAsync(EnableKinesisStreamingDestinationRequest request)` Starts table data replication to the specified Kinesis data stream at a timestamp chosen during the enable workflow.
`Future<EnableKinesisStreamingDestinationResult>`	`enableKinesisStreamingDestinationAsync(EnableKinesisStreamingDestinationRequest request, AsyncHandler<EnableKinesisStreamingDestinationRequest,EnableKinesisStreamingDestinationResult> asyncHandler)` Starts table data replication to the specified Kinesis data stream at a timestamp chosen during the enable workflow.
`Future<ExecuteStatementResult>`	`executeStatementAsync(ExecuteStatementRequest request)` This operation allows you to perform reads and singleton writes on data stored in DynamoDB, using PartiQL.
`Future<ExecuteStatementResult>`	`executeStatementAsync(ExecuteStatementRequest request, AsyncHandler<ExecuteStatementRequest,ExecuteStatementResult> asyncHandler)` This operation allows you to perform reads and singleton writes on data stored in DynamoDB, using PartiQL.
`Future<ExecuteTransactionResult>`	`executeTransactionAsync(ExecuteTransactionRequest request)` This operation allows you to perform transactional reads or writes on data stored in DynamoDB, using PartiQL.
`Future<ExecuteTransactionResult>`	`executeTransactionAsync(ExecuteTransactionRequest request, AsyncHandler<ExecuteTransactionRequest,ExecuteTransactionResult> asyncHandler)` This operation allows you to perform transactional reads or writes on data stored in DynamoDB, using PartiQL.
`Future<ExportTableToPointInTimeResult>`	`exportTableToPointInTimeAsync(ExportTableToPointInTimeRequest request)` Exports table data to an S3 bucket.
`Future<ExportTableToPointInTimeResult>`	`exportTableToPointInTimeAsync(ExportTableToPointInTimeRequest request, AsyncHandler<ExportTableToPointInTimeRequest,ExportTableToPointInTimeResult> asyncHandler)` Exports table data to an S3 bucket.
`ExecutorService`	`getExecutorService()` Returns the executor service used by this client to execute async requests.
`Future<GetItemResult>`	`getItemAsync(GetItemRequest request)` The `GetItem` operation returns a set of attributes for the item with the given primary key.
`Future<GetItemResult>`	`getItemAsync(GetItemRequest request, AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)` The `GetItem` operation returns a set of attributes for the item with the given primary key.
`Future<GetItemResult>`	`getItemAsync(String tableName, Map<String,AttributeValue> key)` Simplified method form for invoking the GetItem operation.
`Future<GetItemResult>`	`getItemAsync(String tableName, Map<String,AttributeValue> key, AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)` Simplified method form for invoking the GetItem operation with an AsyncHandler.
`Future<GetItemResult>`	`getItemAsync(String tableName, Map<String,AttributeValue> key, Boolean consistentRead)` Simplified method form for invoking the GetItem operation.
`Future<GetItemResult>`	`getItemAsync(String tableName, Map<String,AttributeValue> key, Boolean consistentRead, AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)` Simplified method form for invoking the GetItem operation with an AsyncHandler.
`Future<ListBackupsResult>`	`listBackupsAsync(ListBackupsRequest request)` List backups associated with an AWS account.
`Future<ListBackupsResult>`	`listBackupsAsync(ListBackupsRequest request, AsyncHandler<ListBackupsRequest,ListBackupsResult> asyncHandler)` List backups associated with an AWS account.
`Future<ListContributorInsightsResult>`	`listContributorInsightsAsync(ListContributorInsightsRequest request)` Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
`Future<ListContributorInsightsResult>`	`listContributorInsightsAsync(ListContributorInsightsRequest request, AsyncHandler<ListContributorInsightsRequest,ListContributorInsightsResult> asyncHandler)` Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
`Future<ListExportsResult>`	`listExportsAsync(ListExportsRequest request)` Lists completed exports within the past 90 days.
`Future<ListExportsResult>`	`listExportsAsync(ListExportsRequest request, AsyncHandler<ListExportsRequest,ListExportsResult> asyncHandler)` Lists completed exports within the past 90 days.
`Future<ListGlobalTablesResult>`	`listGlobalTablesAsync(ListGlobalTablesRequest request)` Lists all global tables that have a replica in the specified Region.
`Future<ListGlobalTablesResult>`	`listGlobalTablesAsync(ListGlobalTablesRequest request, AsyncHandler<ListGlobalTablesRequest,ListGlobalTablesResult> asyncHandler)` Lists all global tables that have a replica in the specified Region.
`Future<ListTablesResult>`	`listTablesAsync()` Simplified method form for invoking the ListTables operation.
`Future<ListTablesResult>`	`listTablesAsync(AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)` Simplified method form for invoking the ListTables operation with an AsyncHandler.
`Future<ListTablesResult>`	`listTablesAsync(Integer limit)` Simplified method form for invoking the ListTables operation.
`Future<ListTablesResult>`	`listTablesAsync(Integer limit, AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)` Simplified method form for invoking the ListTables operation with an AsyncHandler.
`Future<ListTablesResult>`	`listTablesAsync(ListTablesRequest request)` Returns an array of table names associated with the current account and endpoint.
`Future<ListTablesResult>`	`listTablesAsync(ListTablesRequest request, AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)` Returns an array of table names associated with the current account and endpoint.
`Future<ListTablesResult>`	`listTablesAsync(String exclusiveStartTableName)` Simplified method form for invoking the ListTables operation.
`Future<ListTablesResult>`	`listTablesAsync(String exclusiveStartTableName, AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)` Simplified method form for invoking the ListTables operation with an AsyncHandler.
`Future<ListTablesResult>`	`listTablesAsync(String exclusiveStartTableName, Integer limit)` Simplified method form for invoking the ListTables operation.
`Future<ListTablesResult>`	`listTablesAsync(String exclusiveStartTableName, Integer limit, AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)` Simplified method form for invoking the ListTables operation with an AsyncHandler.
`Future<ListTagsOfResourceResult>`	`listTagsOfResourceAsync(ListTagsOfResourceRequest request)` List all tags on an Amazon DynamoDB resource.
`Future<ListTagsOfResourceResult>`	`listTagsOfResourceAsync(ListTagsOfResourceRequest request, AsyncHandler<ListTagsOfResourceRequest,ListTagsOfResourceResult> asyncHandler)` List all tags on an Amazon DynamoDB resource.
`Future<PutItemResult>`	`putItemAsync(PutItemRequest request)` Creates a new item, or replaces an old item with a new item.
`Future<PutItemResult>`	`putItemAsync(PutItemRequest request, AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)` Creates a new item, or replaces an old item with a new item.
`Future<PutItemResult>`	`putItemAsync(String tableName, Map<String,AttributeValue> item)` Simplified method form for invoking the PutItem operation.
`Future<PutItemResult>`	`putItemAsync(String tableName, Map<String,AttributeValue> item, AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)` Simplified method form for invoking the PutItem operation with an AsyncHandler.
`Future<PutItemResult>`	`putItemAsync(String tableName, Map<String,AttributeValue> item, String returnValues)` Simplified method form for invoking the PutItem operation.
`Future<PutItemResult>`	`putItemAsync(String tableName, Map<String,AttributeValue> item, String returnValues, AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)` Simplified method form for invoking the PutItem operation with an AsyncHandler.
`Future<QueryResult>`	`queryAsync(QueryRequest request)` The `Query` operation finds items based on primary key values.
`Future<QueryResult>`	`queryAsync(QueryRequest request, AsyncHandler<QueryRequest,QueryResult> asyncHandler)` The `Query` operation finds items based on primary key values.
`Future<RestoreTableFromBackupResult>`	`restoreTableFromBackupAsync(RestoreTableFromBackupRequest request)` Creates a new table from an existing backup.
`Future<RestoreTableFromBackupResult>`	`restoreTableFromBackupAsync(RestoreTableFromBackupRequest request, AsyncHandler<RestoreTableFromBackupRequest,RestoreTableFromBackupResult> asyncHandler)` Creates a new table from an existing backup.
`Future<RestoreTableToPointInTimeResult>`	`restoreTableToPointInTimeAsync(RestoreTableToPointInTimeRequest request)` Restores the specified table to the specified point in time within `EarliestRestorableDateTime` and `LatestRestorableDateTime`.
`Future<RestoreTableToPointInTimeResult>`	`restoreTableToPointInTimeAsync(RestoreTableToPointInTimeRequest request, AsyncHandler<RestoreTableToPointInTimeRequest,RestoreTableToPointInTimeResult> asyncHandler)` Restores the specified table to the specified point in time within `EarliestRestorableDateTime` and `LatestRestorableDateTime`.
`Future<ScanResult>`	`scanAsync(ScanRequest request)` The `Scan` operation returns one or more items and item attributes by accessing every item in a table or a secondary index.
`Future<ScanResult>`	`scanAsync(ScanRequest request, AsyncHandler<ScanRequest,ScanResult> asyncHandler)` The `Scan` operation returns one or more items and item attributes by accessing every item in a table or a secondary index.
`Future<ScanResult>`	`scanAsync(String tableName, List<String> attributesToGet)` Simplified method form for invoking the Scan operation.
`Future<ScanResult>`	`scanAsync(String tableName, List<String> attributesToGet, AsyncHandler<ScanRequest,ScanResult> asyncHandler)` Simplified method form for invoking the Scan operation with an AsyncHandler.
`Future<ScanResult>`	`scanAsync(String tableName, List<String> attributesToGet, Map<String,Condition> scanFilter)` Simplified method form for invoking the Scan operation.
`Future<ScanResult>`	`scanAsync(String tableName, List<String> attributesToGet, Map<String,Condition> scanFilter, AsyncHandler<ScanRequest,ScanResult> asyncHandler)` Simplified method form for invoking the Scan operation with an AsyncHandler.
`Future<ScanResult>`	`scanAsync(String tableName, Map<String,Condition> scanFilter)` Simplified method form for invoking the Scan operation.
`Future<ScanResult>`	`scanAsync(String tableName, Map<String,Condition> scanFilter, AsyncHandler<ScanRequest,ScanResult> asyncHandler)` Simplified method form for invoking the Scan operation with an AsyncHandler.
`void`	`shutdown()` Shuts down the client, releasing all managed resources.
`Future<TagResourceResult>`	`tagResourceAsync(TagResourceRequest request)` Associate a set of tags with an Amazon DynamoDB resource.
`Future<TagResourceResult>`	`tagResourceAsync(TagResourceRequest request, AsyncHandler<TagResourceRequest,TagResourceResult> asyncHandler)` Associate a set of tags with an Amazon DynamoDB resource.
`Future<TransactGetItemsResult>`	`transactGetItemsAsync(TransactGetItemsRequest request)` `TransactGetItems` is a synchronous operation that atomically retrieves multiple items from one or more tables (but not from indexes) in a single account and Region.
`Future<TransactGetItemsResult>`	`transactGetItemsAsync(TransactGetItemsRequest request, AsyncHandler<TransactGetItemsRequest,TransactGetItemsResult> asyncHandler)` `TransactGetItems` is a synchronous operation that atomically retrieves multiple items from one or more tables (but not from indexes) in a single account and Region.
`Future<TransactWriteItemsResult>`	`transactWriteItemsAsync(TransactWriteItemsRequest request)` `TransactWriteItems` is a synchronous write operation that groups up to 25 action requests.
`Future<TransactWriteItemsResult>`	`transactWriteItemsAsync(TransactWriteItemsRequest request, AsyncHandler<TransactWriteItemsRequest,TransactWriteItemsResult> asyncHandler)` `TransactWriteItems` is a synchronous write operation that groups up to 25 action requests.
`Future<UntagResourceResult>`	`untagResourceAsync(UntagResourceRequest request)` Removes the association of tags from an Amazon DynamoDB resource.
`Future<UntagResourceResult>`	`untagResourceAsync(UntagResourceRequest request, AsyncHandler<UntagResourceRequest,UntagResourceResult> asyncHandler)` Removes the association of tags from an Amazon DynamoDB resource.
`Future<UpdateContinuousBackupsResult>`	`updateContinuousBackupsAsync(UpdateContinuousBackupsRequest request)` `UpdateContinuousBackups` enables or disables point in time recovery for the specified table.
`Future<UpdateContinuousBackupsResult>`	`updateContinuousBackupsAsync(UpdateContinuousBackupsRequest request, AsyncHandler<UpdateContinuousBackupsRequest,UpdateContinuousBackupsResult> asyncHandler)` `UpdateContinuousBackups` enables or disables point in time recovery for the specified table.
`Future<UpdateContributorInsightsResult>`	`updateContributorInsightsAsync(UpdateContributorInsightsRequest request)` Updates the status for contributor insights for a specific table or index.
`Future<UpdateContributorInsightsResult>`	`updateContributorInsightsAsync(UpdateContributorInsightsRequest request, AsyncHandler<UpdateContributorInsightsRequest,UpdateContributorInsightsResult> asyncHandler)` Updates the status for contributor insights for a specific table or index.
`Future<UpdateGlobalTableResult>`	`updateGlobalTableAsync(UpdateGlobalTableRequest request)` Adds or removes replicas in the specified global table.
`Future<UpdateGlobalTableResult>`	`updateGlobalTableAsync(UpdateGlobalTableRequest request, AsyncHandler<UpdateGlobalTableRequest,UpdateGlobalTableResult> asyncHandler)` Adds or removes replicas in the specified global table.
`Future<UpdateGlobalTableSettingsResult>`	`updateGlobalTableSettingsAsync(UpdateGlobalTableSettingsRequest request)` Updates settings for a global table.
`Future<UpdateGlobalTableSettingsResult>`	`updateGlobalTableSettingsAsync(UpdateGlobalTableSettingsRequest request, AsyncHandler<UpdateGlobalTableSettingsRequest,UpdateGlobalTableSettingsResult> asyncHandler)` Updates settings for a global table.
`Future<UpdateItemResult>`	`updateItemAsync(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates)` Simplified method form for invoking the UpdateItem operation.
`Future<UpdateItemResult>`	`updateItemAsync(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates, AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)` Simplified method form for invoking the UpdateItem operation with an AsyncHandler.
`Future<UpdateItemResult>`	`updateItemAsync(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates, String returnValues)` Simplified method form for invoking the UpdateItem operation.
`Future<UpdateItemResult>`	`updateItemAsync(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates, String returnValues, AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)` Simplified method form for invoking the UpdateItem operation with an AsyncHandler.
`Future<UpdateItemResult>`	`updateItemAsync(UpdateItemRequest request)` Edits an existing item's attributes, or adds a new item to the table if it does not already exist.
`Future<UpdateItemResult>`	`updateItemAsync(UpdateItemRequest request, AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)` Edits an existing item's attributes, or adds a new item to the table if it does not already exist.
`Future<UpdateTableResult>`	`updateTableAsync(String tableName, ProvisionedThroughput provisionedThroughput)` Simplified method form for invoking the UpdateTable operation.
`Future<UpdateTableResult>`	`updateTableAsync(String tableName, ProvisionedThroughput provisionedThroughput, AsyncHandler<UpdateTableRequest,UpdateTableResult> asyncHandler)` Simplified method form for invoking the UpdateTable operation with an AsyncHandler.
`Future<UpdateTableResult>`	`updateTableAsync(UpdateTableRequest request)` Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.
`Future<UpdateTableResult>`	`updateTableAsync(UpdateTableRequest request, AsyncHandler<UpdateTableRequest,UpdateTableResult> asyncHandler)` Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.
`Future<UpdateTableReplicaAutoScalingResult>`	`updateTableReplicaAutoScalingAsync(UpdateTableReplicaAutoScalingRequest request)` Updates auto scaling settings on your global tables at once.
`Future<UpdateTableReplicaAutoScalingResult>`	`updateTableReplicaAutoScalingAsync(UpdateTableReplicaAutoScalingRequest request, AsyncHandler<UpdateTableReplicaAutoScalingRequest,UpdateTableReplicaAutoScalingResult> asyncHandler)` Updates auto scaling settings on your global tables at once.
`Future<UpdateTimeToLiveResult>`	`updateTimeToLiveAsync(UpdateTimeToLiveRequest request)` The `UpdateTimeToLive` method enables or disables Time to Live (TTL) for the specified table.
`Future<UpdateTimeToLiveResult>`	`updateTimeToLiveAsync(UpdateTimeToLiveRequest request, AsyncHandler<UpdateTimeToLiveRequest,UpdateTimeToLiveResult> asyncHandler)` The `UpdateTimeToLive` method enables or disables Time to Live (TTL) for the specified table.

Methods inherited from class com.amazonaws.services.dynamodbv2.AmazonDynamoDBClient
batchExecuteStatement, batchGetItem, batchGetItem, batchGetItem, batchWriteItem, batchWriteItem, builder, calculateCRC32FromCompressedData, createBackup, createGlobalTable, createTable, createTable, deleteBackup, deleteItem, deleteItem, deleteItem, deleteTable, deleteTable, describeBackup, describeContinuousBackups, describeContributorInsights, describeEndpoints, describeExport, describeGlobalTable, describeGlobalTableSettings, describeKinesisStreamingDestination, describeLimits, describeTable, describeTable, describeTableReplicaAutoScaling, describeTimeToLive, disableKinesisStreamingDestination, enableKinesisStreamingDestination, executeStatement, executeTransaction, exportTableToPointInTime, getCachedResponseMetadata, getItem, getItem, getItem, listBackups, listContributorInsights, listExports, listGlobalTables, listTables, listTables, listTables, listTables, listTables, listTagsOfResource, putItem, putItem, putItem, query, restoreTableFromBackup, restoreTableToPointInTime, scan, scan, scan, scan, tagResource, transactGetItems, transactWriteItems, untagResource, updateContinuousBackups, updateContributorInsights, updateGlobalTable, updateGlobalTableSettings, updateItem, updateItem, updateItem, updateTable, updateTable, updateTableReplicaAutoScaling, updateTimeToLive, waiters

Methods inherited from class com.amazonaws.AmazonWebServiceClient
addRequestHandler, addRequestHandler, beforeClientExecution, beforeMarshalling, checkMutability, configureRegion, createExecutionContext, createExecutionContext, createExecutionContext, createSignerProvider, endClientExecution, endClientExecution, getClientConfiguration, getClientId, getEndpointPrefix, getMonitoringListeners, getRequestMetricsCollector, getServiceAbbreviation, getServiceName, getServiceNameIntern, getSigner, getSignerByURI, getSignerOverride, getSignerProvider, getSignerRegionOverride, getSigningRegion, getTimeOffset, isCsmEnabled, isEndpointOverridden, isProfilingEnabled, isRequestMetricsEnabled, makeImmutable, removeRequestHandler, removeRequestHandler, requestMetricCollector, setEndpoint, setEndpoint, setEndpointPrefix, setRegion, setServiceNameIntern, setSignerRegionOverride, setTimeOffset, shouldGenerateClientSideMonitoringEvents, useStrictHostNameVerification, withEndpoint, withRegion, withRegion, withTimeOffset

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface com.amazonaws.services.dynamodbv2.AmazonDynamoDB
batchExecuteStatement, batchGetItem, batchGetItem, batchGetItem, batchWriteItem, batchWriteItem, createBackup, createGlobalTable, createTable, createTable, deleteBackup, deleteItem, deleteItem, deleteItem, deleteTable, deleteTable, describeBackup, describeContinuousBackups, describeContributorInsights, describeEndpoints, describeExport, describeGlobalTable, describeGlobalTableSettings, describeKinesisStreamingDestination, describeLimits, describeTable, describeTable, describeTableReplicaAutoScaling, describeTimeToLive, disableKinesisStreamingDestination, enableKinesisStreamingDestination, executeStatement, executeTransaction, exportTableToPointInTime, getCachedResponseMetadata, getItem, getItem, getItem, listBackups, listContributorInsights, listExports, listGlobalTables, listTables, listTables, listTables, listTables, listTables, listTagsOfResource, putItem, putItem, putItem, query, restoreTableFromBackup, restoreTableToPointInTime, scan, scan, scan, scan, setEndpoint, setRegion, tagResource, transactGetItems, transactWriteItems, untagResource, updateContinuousBackups, updateContributorInsights, updateGlobalTable, updateGlobalTableSettings, updateItem, updateItem, updateItem, updateTable, updateTable, updateTableReplicaAutoScaling, updateTimeToLive, waiters

- Constructor Detail
  - AmazonDynamoDBAsyncClient
```
@Deprecated
public AmazonDynamoDBAsyncClient()
```
    Deprecated. use AmazonDynamoDBAsyncClientBuilder.defaultClient()
    Constructs a new asynchronous client to invoke service methods on DynamoDB. A credentials provider chain will be used that searches for credentials in this order:
    - Environment Variables - AWS_ACCESS_KEY_ID and AWS_SECRET_KEY
    - Java System Properties - aws.accessKeyId and aws.secretKey
    - Credential profiles file at the default location (~/.aws/credentials) shared by all AWS SDKs and the AWS CLI
    - Instance profile credentials delivered through the Amazon EC2 metadata service
    Asynchronous methods are delegated to a fixed-size thread pool containing 50 threads (to match the default maximum number of concurrent connections to the service).
    See Also:
    
    DefaultAWSCredentialsProviderChain, Executors.newFixedThreadPool(int)
  - AmazonDynamoDBAsyncClient
```
@Deprecated
public AmazonDynamoDBAsyncClient(ClientConfiguration clientConfiguration)
```
    Deprecated. use AwsClientBuilder.withClientConfiguration(ClientConfiguration)
    Constructs a new asynchronous client to invoke service methods on DynamoDB. A credentials provider chain will be used that searches for credentials in this order:
    - Environment Variables - AWS_ACCESS_KEY_ID and AWS_SECRET_KEY
    - Java System Properties - aws.accessKeyId and aws.secretKey
    - Credential profiles file at the default location (~/.aws/credentials) shared by all AWS SDKs and the AWS CLI
    - Instance profile credentials delivered through the Amazon EC2 metadata service
    Asynchronous methods are delegated to a fixed-size thread pool containing a number of threads equal to the maximum number of concurrent connections configured via ClientConfiguration.getMaxConnections().
    Parameters:
    
    clientConfiguration - The client configuration options controlling how this client connects to DynamoDB (ex: proxy settings, retry counts, etc).
    
    See Also:
    
    DefaultAWSCredentialsProviderChain, Executors.newFixedThreadPool(int)
  - AmazonDynamoDBAsyncClient
```
@Deprecated
public AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials)
```
    Deprecated. use AwsClientBuilder.withCredentials(AWSCredentialsProvider)
    
    Constructs a new asynchronous client to invoke service methods on DynamoDB using the specified AWS account credentials.
    Asynchronous methods are delegated to a fixed-size thread pool containing 50 threads (to match the default maximum number of concurrent connections to the service).
    
    Parameters:
    
    awsCredentials - The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.
    
    See Also:
    
    Executors.newFixedThreadPool(int)
  - AmazonDynamoDBAsyncClient
```
@Deprecated
public AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials,
                                             ExecutorService executorService)
```
    Deprecated. use AwsClientBuilder.withCredentials(AWSCredentialsProvider) and AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)
    
    Constructs a new asynchronous client to invoke service methods on DynamoDB using the specified AWS account credentials and executor service. Default client settings will be used.
    
    Parameters:
    
    awsCredentials - The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.
    
    executorService - The executor service by which all asynchronous requests will be executed.
  - AmazonDynamoDBAsyncClient
```
@Deprecated
public AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials,
                                             ClientConfiguration clientConfiguration,
                                             ExecutorService executorService)
```
    Deprecated. use AwsClientBuilder.withCredentials(AWSCredentialsProvider) and AwsClientBuilder.withClientConfiguration(ClientConfiguration) and AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)
    
    Constructs a new asynchronous client to invoke service methods on DynamoDB using the specified AWS account credentials, executor service, and client configuration options.
    
    Parameters:
    
    awsCredentials - The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.
    
    clientConfiguration - Client configuration options (ex: max retry limit, proxy settings, etc).
    
    executorService - The executor service by which all asynchronous requests will be executed.
  - AmazonDynamoDBAsyncClient
```
@Deprecated
public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider)
```
    Deprecated. use AwsClientBuilder.withCredentials(AWSCredentialsProvider)
    
    Constructs a new asynchronous client to invoke service methods on DynamoDB using the specified AWS account credentials provider. Default client settings will be used.
    Asynchronous methods are delegated to a fixed-size thread pool containing 50 threads (to match the default maximum number of concurrent connections to the service).
    
    Parameters:
    
    awsCredentialsProvider - The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
    
    See Also:
    
    Executors.newFixedThreadPool(int)
  - AmazonDynamoDBAsyncClient
```
@Deprecated
public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
                                             ClientConfiguration clientConfiguration)
```
    Deprecated. use AwsClientBuilder.withCredentials(AWSCredentialsProvider) and AwsClientBuilder.withClientConfiguration(ClientConfiguration)
    
    Constructs a new asynchronous client to invoke service methods on DynamoDB using the provided AWS account credentials provider and client configuration options.
    Asynchronous methods are delegated to a fixed-size thread pool containing a number of threads equal to the maximum number of concurrent connections configured via ClientConfiguration.getMaxConnections().
    
    Parameters:
    
    awsCredentialsProvider - The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
    
    clientConfiguration - Client configuration options (ex: max retry limit, proxy settings, etc).
    
    See Also:
    
    DefaultAWSCredentialsProviderChain, Executors.newFixedThreadPool(int)
  - AmazonDynamoDBAsyncClient
```
@Deprecated
public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
                                             ExecutorService executorService)
```
    Deprecated. use AwsClientBuilder.withCredentials(AWSCredentialsProvider) and AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)
    
    Constructs a new asynchronous client to invoke service methods on DynamoDB using the specified AWS account credentials provider and executor service. Default client settings will be used.
    
    Parameters:
    
    awsCredentialsProvider - The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
    
    executorService - The executor service by which all asynchronous requests will be executed.
  - AmazonDynamoDBAsyncClient
```
@Deprecated
public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
                                             ClientConfiguration clientConfiguration,
                                             ExecutorService executorService)
```
    Deprecated. use AwsClientBuilder.withCredentials(AWSCredentialsProvider) and AwsClientBuilder.withClientConfiguration(ClientConfiguration) and AwsAsyncClientBuilder.withExecutorFactory(com.amazonaws.client.builder.ExecutorFactory)
    
    Constructs a new asynchronous client to invoke service methods on DynamoDB using the specified AWS account credentials provider, executor service, and client configuration options.
    
    Parameters:
    
    awsCredentialsProvider - The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
    
    clientConfiguration - Client configuration options (ex: max retry limit, proxy settings, etc).
    
    executorService - The executor service by which all asynchronous requests will be executed.
- Method Detail
  - asyncBuilder
```
public static AmazonDynamoDBAsyncClientBuilder asyncBuilder()
```
  - getExecutorService
```
public ExecutorService getExecutorService()
```
    Returns the executor service used by this client to execute async requests.
    
    Returns:
    
    The executor service used by this client to execute async requests.
  - batchExecuteStatementAsync
```
public Future<BatchExecuteStatementResult> batchExecuteStatementAsync(BatchExecuteStatementRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    This operation allows you to perform batch reads and writes on data stored in DynamoDB, using PartiQL.
    
    Specified by:
    
    batchExecuteStatementAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the BatchExecuteStatement operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - batchExecuteStatementAsync
```
public Future<BatchExecuteStatementResult> batchExecuteStatementAsync(BatchExecuteStatementRequest request,
                                                                      AsyncHandler<BatchExecuteStatementRequest,BatchExecuteStatementResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    This operation allows you to perform batch reads and writes on data stored in DynamoDB, using PartiQL.
    
    Specified by:
    
    batchExecuteStatementAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the BatchExecuteStatement operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - batchGetItemAsync
```
public Future<BatchGetItemResult> batchGetItemAsync(BatchGetItemRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The BatchGetItem operation returns the attributes of one or more items from one or more tables. You identify requested items by primary key.
    
    A single operation can retrieve up to 16 MB of data, which can contain as many as 100 items. BatchGetItem returns a partial result if the response size limit is exceeded, the table's provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned, the operation returns a value for UnprocessedKeys. You can use this value to retry the operation starting with the next item to get.
    
    If you request more than 100 items, BatchGetItem returns a ValidationException with the message "Too many items requested for the BatchGetItem call."
    
    For example, if you ask to retrieve 100 items, but each individual item is 300 KB in size, the system returns 52 items (so as not to exceed the 16 MB limit). It also returns an appropriate UnprocessedKeys value so you can get the next page of results. If desired, your application can include its own logic to assemble the pages of results into one dataset.
    
    If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem returns a ProvisionedThroughputExceededException. If at least one of the items is successfully processed, then BatchGetItem completes successfully, while returning the keys of the unread items in UnprocessedKeys.
    
    If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
    
    For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
    
    By default, BatchGetItem performs eventually consistent reads on every table in the request. If you want strongly consistent reads instead, you can set ConsistentRead to true for any or all tables.
    
    In order to minimize response latency, BatchGetItem retrieves items in parallel.
    
    When designing your application, keep in mind that DynamoDB does not return items in any particular order. To help parse the response by item, include the primary key values for the items in your request in the ProjectionExpression parameter.
    
    If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Working with Tables in the Amazon DynamoDB Developer Guide.
    
    Specified by:
    
    batchGetItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a BatchGetItem operation.
    
    Returns:
    
    A Java Future containing the result of the BatchGetItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - batchGetItemAsync
```
public Future<BatchGetItemResult> batchGetItemAsync(BatchGetItemRequest request,
                                                    AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The BatchGetItem operation returns the attributes of one or more items from one or more tables. You identify requested items by primary key.
    
    A single operation can retrieve up to 16 MB of data, which can contain as many as 100 items. BatchGetItem returns a partial result if the response size limit is exceeded, the table's provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned, the operation returns a value for UnprocessedKeys. You can use this value to retry the operation starting with the next item to get.
    
    If you request more than 100 items, BatchGetItem returns a ValidationException with the message "Too many items requested for the BatchGetItem call."
    
    For example, if you ask to retrieve 100 items, but each individual item is 300 KB in size, the system returns 52 items (so as not to exceed the 16 MB limit). It also returns an appropriate UnprocessedKeys value so you can get the next page of results. If desired, your application can include its own logic to assemble the pages of results into one dataset.
    
    If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem returns a ProvisionedThroughputExceededException. If at least one of the items is successfully processed, then BatchGetItem completes successfully, while returning the keys of the unread items in UnprocessedKeys.
    
    If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
    
    For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
    
    By default, BatchGetItem performs eventually consistent reads on every table in the request. If you want strongly consistent reads instead, you can set ConsistentRead to true for any or all tables.
    
    In order to minimize response latency, BatchGetItem retrieves items in parallel.
    
    When designing your application, keep in mind that DynamoDB does not return items in any particular order. To help parse the response by item, include the primary key values for the items in your request in the ProjectionExpression parameter.
    
    If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Working with Tables in the Amazon DynamoDB Developer Guide.
    
    Specified by:
    
    batchGetItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a BatchGetItem operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the BatchGetItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - batchGetItemAsync
```
public Future<BatchGetItemResult> batchGetItemAsync(Map<String,KeysAndAttributes> requestItems,
                                                    String returnConsumedCapacity)
```
    Simplified method form for invoking the BatchGetItem operation.
    
    Specified by:
    
    batchGetItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    batchGetItemAsync(BatchGetItemRequest)
  - batchGetItemAsync
```
public Future<BatchGetItemResult> batchGetItemAsync(Map<String,KeysAndAttributes> requestItems,
                                                    String returnConsumedCapacity,
                                                    AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)
```
    Simplified method form for invoking the BatchGetItem operation with an AsyncHandler.
    
    Specified by:
    
    batchGetItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    batchGetItemAsync(BatchGetItemRequest, com.amazonaws.handlers.AsyncHandler)
  - batchGetItemAsync
```
public Future<BatchGetItemResult> batchGetItemAsync(Map<String,KeysAndAttributes> requestItems)
```
    Simplified method form for invoking the BatchGetItem operation.
    
    Specified by:
    
    batchGetItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    batchGetItemAsync(BatchGetItemRequest)
  - batchGetItemAsync
```
public Future<BatchGetItemResult> batchGetItemAsync(Map<String,KeysAndAttributes> requestItems,
                                                    AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)
```
    Simplified method form for invoking the BatchGetItem operation with an AsyncHandler.
    
    Specified by:
    
    batchGetItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    batchGetItemAsync(BatchGetItemRequest, com.amazonaws.handlers.AsyncHandler)
  - batchWriteItemAsync
```
public Future<BatchWriteItemResult> batchWriteItemAsync(BatchWriteItemRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    The BatchWriteItem operation puts or deletes multiple items in one or more tables. A single call to BatchWriteItem can write up to 16 MB of data, which can comprise as many as 25 put or delete requests. Individual items to be written can be as large as 400 KB.
    
    BatchWriteItem cannot update items. To update items, use the UpdateItem action.
    
    The individual PutItem and DeleteItem operations specified in BatchWriteItem are atomic; however BatchWriteItem as a whole is not. If any requested operations fail because the table's provisioned throughput is exceeded or an internal processing failure occurs, the failed operations are returned in the UnprocessedItems response parameter. You can investigate and optionally resend the requests. Typically, you would call BatchWriteItem in a loop. Each iteration would check for unprocessed items and submit a new BatchWriteItem request with those unprocessed items until all items have been processed.
    
    If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchWriteItem returns a ProvisionedThroughputExceededException.
    
    If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
    
    For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
    
    With BatchWriteItem, you can efficiently write or delete large amounts of data, such as from Amazon EMR, or copy data from another database into DynamoDB. In order to improve performance with these large-scale operations, BatchWriteItem does not behave in the same way as individual PutItem and DeleteItem calls would. For example, you cannot specify conditions on individual put and delete requests, and BatchWriteItem does not return deleted items in the response.
    
    If you use a programming language that supports concurrency, you can use threads to write items in parallel. Your application must include the necessary logic to manage the threads. With languages that don't support threading, you must update or delete the specified items one at a time. In both situations, BatchWriteItem performs the specified put and delete operations in parallel, giving you the power of the thread pool approach without having to introduce complexity into your application.
    
    Parallel processing reduces latency, but each specified put and delete request consumes the same number of write capacity units whether it is processed in parallel or not. Delete operations on nonexistent items consume one write capacity unit.
    
    If one or more of the following is true, DynamoDB rejects the entire batch write operation:
    - One or more tables specified in the BatchWriteItem request does not exist.
    - Primary key attributes specified on an item in the request do not match those in the corresponding table's primary key schema.
    - You try to perform multiple operations on the same item in the same BatchWriteItem request. For example, you cannot put and delete the same item in the same BatchWriteItem request.
    - Your request contains at least two items with identical hash and range keys (which essentially is two put operations).
    - There are more than 25 requests in the batch.
    - Any individual item in a batch exceeds 400 KB.
    - The total request size exceeds 16 MB.
    Specified by:
    
    batchWriteItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a BatchWriteItem operation.
    
    Returns:
    
    A Java Future containing the result of the BatchWriteItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - batchWriteItemAsync
```
public Future<BatchWriteItemResult> batchWriteItemAsync(BatchWriteItemRequest request,
                                                        AsyncHandler<BatchWriteItemRequest,BatchWriteItemResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    The BatchWriteItem operation puts or deletes multiple items in one or more tables. A single call to BatchWriteItem can write up to 16 MB of data, which can comprise as many as 25 put or delete requests. Individual items to be written can be as large as 400 KB.
    
    BatchWriteItem cannot update items. To update items, use the UpdateItem action.
    
    The individual PutItem and DeleteItem operations specified in BatchWriteItem are atomic; however BatchWriteItem as a whole is not. If any requested operations fail because the table's provisioned throughput is exceeded or an internal processing failure occurs, the failed operations are returned in the UnprocessedItems response parameter. You can investigate and optionally resend the requests. Typically, you would call BatchWriteItem in a loop. Each iteration would check for unprocessed items and submit a new BatchWriteItem request with those unprocessed items until all items have been processed.
    
    If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchWriteItem returns a ProvisionedThroughputExceededException.
    
    If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
    
    For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
    
    With BatchWriteItem, you can efficiently write or delete large amounts of data, such as from Amazon EMR, or copy data from another database into DynamoDB. In order to improve performance with these large-scale operations, BatchWriteItem does not behave in the same way as individual PutItem and DeleteItem calls would. For example, you cannot specify conditions on individual put and delete requests, and BatchWriteItem does not return deleted items in the response.
    
    If you use a programming language that supports concurrency, you can use threads to write items in parallel. Your application must include the necessary logic to manage the threads. With languages that don't support threading, you must update or delete the specified items one at a time. In both situations, BatchWriteItem performs the specified put and delete operations in parallel, giving you the power of the thread pool approach without having to introduce complexity into your application.
    
    Parallel processing reduces latency, but each specified put and delete request consumes the same number of write capacity units whether it is processed in parallel or not. Delete operations on nonexistent items consume one write capacity unit.
    
    If one or more of the following is true, DynamoDB rejects the entire batch write operation:
    - One or more tables specified in the BatchWriteItem request does not exist.
    - Primary key attributes specified on an item in the request do not match those in the corresponding table's primary key schema.
    - You try to perform multiple operations on the same item in the same BatchWriteItem request. For example, you cannot put and delete the same item in the same BatchWriteItem request.
    - Your request contains at least two items with identical hash and range keys (which essentially is two put operations).
    - There are more than 25 requests in the batch.
    - Any individual item in a batch exceeds 400 KB.
    - The total request size exceeds 16 MB.
    Specified by:
    
    batchWriteItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a BatchWriteItem operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the BatchWriteItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - batchWriteItemAsync
```
public Future<BatchWriteItemResult> batchWriteItemAsync(Map<String,List<WriteRequest>> requestItems)
```
    Simplified method form for invoking the BatchWriteItem operation.
    
    Specified by:
    
    batchWriteItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    batchWriteItemAsync(BatchWriteItemRequest)
  - batchWriteItemAsync
```
public Future<BatchWriteItemResult> batchWriteItemAsync(Map<String,List<WriteRequest>> requestItems,
                                                        AsyncHandler<BatchWriteItemRequest,BatchWriteItemResult> asyncHandler)
```
    Simplified method form for invoking the BatchWriteItem operation with an AsyncHandler.
    
    Specified by:
    
    batchWriteItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    batchWriteItemAsync(BatchWriteItemRequest, com.amazonaws.handlers.AsyncHandler)
  - createBackupAsync
```
public Future<CreateBackupResult> createBackupAsync(CreateBackupRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    Creates a backup for an existing table.
    
    Each time you create an on-demand backup, the entire table data is backed up. There is no limit to the number of on-demand backups that can be taken.
    
    When you create an on-demand backup, a time marker of the request is cataloged, and the backup is created asynchronously, by applying all changes until the time of the request to the last full table snapshot. Backup requests are processed instantaneously and become available for restore within minutes.
    
    You can call CreateBackup at a maximum rate of 50 times per second.
    
    All backups in DynamoDB work without consuming any provisioned throughput on the table.
    
    If you submit a backup request on 2018-12-14 at 14:25:00, the backup is guaranteed to contain all data committed to the table up to 14:24:00, and data committed after 14:26:00 will not be. The backup might contain data modifications made between 14:24:00 and 14:26:00. On-demand backup does not support causal consistency.
    
    Along with data, the following are also included on the backups:
    - Global secondary indexes (GSIs)
    - Local secondary indexes (LSIs)
    - Streams
    - Provisioned read and write capacity
    Specified by:
    
    createBackupAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the CreateBackup operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createBackupAsync
```
public Future<CreateBackupResult> createBackupAsync(CreateBackupRequest request,
                                                    AsyncHandler<CreateBackupRequest,CreateBackupResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    Creates a backup for an existing table.
    
    Each time you create an on-demand backup, the entire table data is backed up. There is no limit to the number of on-demand backups that can be taken.
    
    When you create an on-demand backup, a time marker of the request is cataloged, and the backup is created asynchronously, by applying all changes until the time of the request to the last full table snapshot. Backup requests are processed instantaneously and become available for restore within minutes.
    
    You can call CreateBackup at a maximum rate of 50 times per second.
    
    All backups in DynamoDB work without consuming any provisioned throughput on the table.
    
    If you submit a backup request on 2018-12-14 at 14:25:00, the backup is guaranteed to contain all data committed to the table up to 14:24:00, and data committed after 14:26:00 will not be. The backup might contain data modifications made between 14:24:00 and 14:26:00. On-demand backup does not support causal consistency.
    
    Along with data, the following are also included on the backups:
    - Global secondary indexes (GSIs)
    - Local secondary indexes (LSIs)
    - Streams
    - Provisioned read and write capacity
    Specified by:
    
    createBackupAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the CreateBackup operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createGlobalTableAsync
```
public Future<CreateGlobalTableResult> createGlobalTableAsync(CreateGlobalTableRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    Creates a global table from an existing table. A global table creates a replication relationship between two or more DynamoDB tables with the same table name in the provided Regions.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    If you want to add a new replica table to a global table, each of the following conditions must be true:
    - The table must have the same primary key as all of the other replicas.
    - The table must have the same name as all of the other replicas.
    - The table must have DynamoDB Streams enabled, with the stream containing both the new and the old images of the item.
    - None of the replica tables in the global table can contain any data.
    If global secondary indexes are specified, then the following conditions must also be met:
    - The global secondary indexes must have the same name.
    - The global secondary indexes must have the same hash key and sort key (if present).
    If local secondary indexes are specified, then the following conditions must also be met:
    - The local secondary indexes must have the same name.
    - The local secondary indexes must have the same hash key and sort key (if present).
    Write capacity settings should be set consistently across your replica tables and secondary indexes. DynamoDB strongly recommends enabling auto scaling to manage the write capacity settings for all of your global tables replicas and indexes.
    
    If you prefer to manage write capacity settings manually, you should provision equal replicated write capacity units to your replica tables. You should also provision equal replicated write capacity units to matching secondary indexes across your global table.
    Specified by:
    
    createGlobalTableAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the CreateGlobalTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createGlobalTableAsync
```
public Future<CreateGlobalTableResult> createGlobalTableAsync(CreateGlobalTableRequest request,
                                                              AsyncHandler<CreateGlobalTableRequest,CreateGlobalTableResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    Creates a global table from an existing table. A global table creates a replication relationship between two or more DynamoDB tables with the same table name in the provided Regions.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    If you want to add a new replica table to a global table, each of the following conditions must be true:
    - The table must have the same primary key as all of the other replicas.
    - The table must have the same name as all of the other replicas.
    - The table must have DynamoDB Streams enabled, with the stream containing both the new and the old images of the item.
    - None of the replica tables in the global table can contain any data.
    If global secondary indexes are specified, then the following conditions must also be met:
    - The global secondary indexes must have the same name.
    - The global secondary indexes must have the same hash key and sort key (if present).
    If local secondary indexes are specified, then the following conditions must also be met:
    - The local secondary indexes must have the same name.
    - The local secondary indexes must have the same hash key and sort key (if present).
    Write capacity settings should be set consistently across your replica tables and secondary indexes. DynamoDB strongly recommends enabling auto scaling to manage the write capacity settings for all of your global tables replicas and indexes.
    
    If you prefer to manage write capacity settings manually, you should provision equal replicated write capacity units to your replica tables. You should also provision equal replicated write capacity units to matching secondary indexes across your global table.
    Specified by:
    
    createGlobalTableAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the CreateGlobalTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createTableAsync
```
public Future<CreateTableResult> createTableAsync(CreateTableRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The CreateTable operation adds a new table to your account. In an AWS account, table names must be unique within each Region. That is, you can have two tables with same name if you create the tables in different Regions.
    
    CreateTable is an asynchronous operation. Upon receiving a CreateTable request, DynamoDB immediately returns a response with a TableStatus of CREATING. After the table is created, DynamoDB sets the TableStatus to ACTIVE. You can perform read and write operations only on an ACTIVE table.
    
    You can optionally define secondary indexes on the new table, as part of the CreateTable operation. If you want to create multiple tables with secondary indexes on them, you must create the tables sequentially. Only one table with secondary indexes can be in the CREATING state at any given time.
    
    You can use the DescribeTable action to check the table status.
    
    Specified by:
    
    createTableAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a CreateTable operation.
    
    Returns:
    
    A Java Future containing the result of the CreateTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createTableAsync
```
public Future<CreateTableResult> createTableAsync(CreateTableRequest request,
                                                  AsyncHandler<CreateTableRequest,CreateTableResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The CreateTable operation adds a new table to your account. In an AWS account, table names must be unique within each Region. That is, you can have two tables with same name if you create the tables in different Regions.
    
    CreateTable is an asynchronous operation. Upon receiving a CreateTable request, DynamoDB immediately returns a response with a TableStatus of CREATING. After the table is created, DynamoDB sets the TableStatus to ACTIVE. You can perform read and write operations only on an ACTIVE table.
    
    You can optionally define secondary indexes on the new table, as part of the CreateTable operation. If you want to create multiple tables with secondary indexes on them, you must create the tables sequentially. Only one table with secondary indexes can be in the CREATING state at any given time.
    
    You can use the DescribeTable action to check the table status.
    
    Specified by:
    
    createTableAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a CreateTable operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the CreateTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createTableAsync
```
public Future<CreateTableResult> createTableAsync(List<AttributeDefinition> attributeDefinitions,
                                                  String tableName,
                                                  List<KeySchemaElement> keySchema,
                                                  ProvisionedThroughput provisionedThroughput)
```
    Simplified method form for invoking the CreateTable operation.
    
    Specified by:
    
    createTableAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    createTableAsync(CreateTableRequest)
  - createTableAsync
```
public Future<CreateTableResult> createTableAsync(List<AttributeDefinition> attributeDefinitions,
                                                  String tableName,
                                                  List<KeySchemaElement> keySchema,
                                                  ProvisionedThroughput provisionedThroughput,
                                                  AsyncHandler<CreateTableRequest,CreateTableResult> asyncHandler)
```
    Simplified method form for invoking the CreateTable operation with an AsyncHandler.
    
    Specified by:
    
    createTableAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    createTableAsync(CreateTableRequest, com.amazonaws.handlers.AsyncHandler)
  - deleteBackupAsync
```
public Future<DeleteBackupResult> deleteBackupAsync(DeleteBackupRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Deletes an existing backup of a table.
    
    You can call DeleteBackup at a maximum rate of 10 times per second.
    
    Specified by:
    
    deleteBackupAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DeleteBackup operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteBackupAsync
```
public Future<DeleteBackupResult> deleteBackupAsync(DeleteBackupRequest request,
                                                    AsyncHandler<DeleteBackupRequest,DeleteBackupResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Deletes an existing backup of a table.
    
    You can call DeleteBackup at a maximum rate of 10 times per second.
    
    Specified by:
    
    deleteBackupAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DeleteBackup operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteItemAsync
```
public Future<DeleteItemResult> deleteItemAsync(DeleteItemRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Deletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value.
    
    In addition to deleting an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.
    
    Unless you specify conditions, the DeleteItem is an idempotent operation; running it multiple times on the same item or attribute does not result in an error response.
    
    Conditional deletes are useful for deleting items only if specific conditions are met. If those conditions are met, DynamoDB performs the delete. Otherwise, the item is not deleted.
    
    Specified by:
    
    deleteItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a DeleteItem operation.
    
    Returns:
    
    A Java Future containing the result of the DeleteItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteItemAsync
```
public Future<DeleteItemResult> deleteItemAsync(DeleteItemRequest request,
                                                AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Deletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value.
    
    In addition to deleting an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.
    
    Unless you specify conditions, the DeleteItem is an idempotent operation; running it multiple times on the same item or attribute does not result in an error response.
    
    Conditional deletes are useful for deleting items only if specific conditions are met. If those conditions are met, DynamoDB performs the delete. Otherwise, the item is not deleted.
    
    Specified by:
    
    deleteItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a DeleteItem operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DeleteItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteItemAsync
```
public Future<DeleteItemResult> deleteItemAsync(String tableName,
                                                Map<String,AttributeValue> key)
```
    Simplified method form for invoking the DeleteItem operation.
    
    Specified by:
    
    deleteItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    deleteItemAsync(DeleteItemRequest)
  - deleteItemAsync
```
public Future<DeleteItemResult> deleteItemAsync(String tableName,
                                                Map<String,AttributeValue> key,
                                                AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)
```
    Simplified method form for invoking the DeleteItem operation with an AsyncHandler.
    
    Specified by:
    
    deleteItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    deleteItemAsync(DeleteItemRequest, com.amazonaws.handlers.AsyncHandler)
  - deleteItemAsync
```
public Future<DeleteItemResult> deleteItemAsync(String tableName,
                                                Map<String,AttributeValue> key,
                                                String returnValues)
```
    Simplified method form for invoking the DeleteItem operation.
    
    Specified by:
    
    deleteItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    deleteItemAsync(DeleteItemRequest)
  - deleteItemAsync
```
public Future<DeleteItemResult> deleteItemAsync(String tableName,
                                                Map<String,AttributeValue> key,
                                                String returnValues,
                                                AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)
```
    Simplified method form for invoking the DeleteItem operation with an AsyncHandler.
    
    Specified by:
    
    deleteItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    deleteItemAsync(DeleteItemRequest, com.amazonaws.handlers.AsyncHandler)
  - deleteTableAsync
```
public Future<DeleteTableResult> deleteTableAsync(DeleteTableRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The DeleteTable operation deletes a table and all of its items. After a DeleteTable request, the specified table is in the DELETING state until DynamoDB completes the deletion. If the table is in the ACTIVE state, you can delete it. If a table is in CREATING or UPDATING states, then DynamoDB returns a ResourceInUseException. If the specified table does not exist, DynamoDB returns a ResourceNotFoundException. If table is already in the DELETING state, no error is returned.
    
    DynamoDB might continue to accept data read and write operations, such as GetItem and PutItem, on a table in the DELETING state until the table deletion is complete.
    
    When you delete a table, any indexes on that table are also deleted.
    
    If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes into the DISABLED state, and the stream is automatically deleted after 24 hours.
    
    Use the DescribeTable action to check the status of the table.
    
    Specified by:
    
    deleteTableAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a DeleteTable operation.
    
    Returns:
    
    A Java Future containing the result of the DeleteTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteTableAsync
```
public Future<DeleteTableResult> deleteTableAsync(DeleteTableRequest request,
                                                  AsyncHandler<DeleteTableRequest,DeleteTableResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The DeleteTable operation deletes a table and all of its items. After a DeleteTable request, the specified table is in the DELETING state until DynamoDB completes the deletion. If the table is in the ACTIVE state, you can delete it. If a table is in CREATING or UPDATING states, then DynamoDB returns a ResourceInUseException. If the specified table does not exist, DynamoDB returns a ResourceNotFoundException. If table is already in the DELETING state, no error is returned.
    
    DynamoDB might continue to accept data read and write operations, such as GetItem and PutItem, on a table in the DELETING state until the table deletion is complete.
    
    When you delete a table, any indexes on that table are also deleted.
    
    If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes into the DISABLED state, and the stream is automatically deleted after 24 hours.
    
    Use the DescribeTable action to check the status of the table.
    
    Specified by:
    
    deleteTableAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a DeleteTable operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DeleteTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteTableAsync
```
public Future<DeleteTableResult> deleteTableAsync(String tableName)
```
    Simplified method form for invoking the DeleteTable operation.
    
    Specified by:
    
    deleteTableAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    deleteTableAsync(DeleteTableRequest)
  - deleteTableAsync
```
public Future<DeleteTableResult> deleteTableAsync(String tableName,
                                                  AsyncHandler<DeleteTableRequest,DeleteTableResult> asyncHandler)
```
    Simplified method form for invoking the DeleteTable operation with an AsyncHandler.
    
    Specified by:
    
    deleteTableAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    deleteTableAsync(DeleteTableRequest, com.amazonaws.handlers.AsyncHandler)
  - describeBackupAsync
```
public Future<DescribeBackupResult> describeBackupAsync(DescribeBackupRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Describes an existing backup of a table.
    
    You can call DescribeBackup at a maximum rate of 10 times per second.
    
    Specified by:
    
    describeBackupAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DescribeBackup operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeBackupAsync
```
public Future<DescribeBackupResult> describeBackupAsync(DescribeBackupRequest request,
                                                        AsyncHandler<DescribeBackupRequest,DescribeBackupResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Describes an existing backup of a table.
    
    You can call DescribeBackup at a maximum rate of 10 times per second.
    
    Specified by:
    
    describeBackupAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeBackup operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeContinuousBackupsAsync
```
public Future<DescribeContinuousBackupsResult> describeContinuousBackupsAsync(DescribeContinuousBackupsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Checks the status of continuous backups and point in time recovery on the specified table. Continuous backups are ENABLED on all tables at table creation. If point in time recovery is enabled, PointInTimeRecoveryStatus will be set to ENABLED.
    
    After continuous backups and point in time recovery are enabled, you can restore to any point in time within EarliestRestorableDateTime and LatestRestorableDateTime.
    
    LatestRestorableDateTime is typically 5 minutes before the current time. You can restore your table to any point in time during the last 35 days.
    
    You can call DescribeContinuousBackups at a maximum rate of 10 times per second.
    
    Specified by:
    
    describeContinuousBackupsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DescribeContinuousBackups operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeContinuousBackupsAsync
```
public Future<DescribeContinuousBackupsResult> describeContinuousBackupsAsync(DescribeContinuousBackupsRequest request,
                                                                              AsyncHandler<DescribeContinuousBackupsRequest,DescribeContinuousBackupsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Checks the status of continuous backups and point in time recovery on the specified table. Continuous backups are ENABLED on all tables at table creation. If point in time recovery is enabled, PointInTimeRecoveryStatus will be set to ENABLED.
    
    After continuous backups and point in time recovery are enabled, you can restore to any point in time within EarliestRestorableDateTime and LatestRestorableDateTime.
    
    LatestRestorableDateTime is typically 5 minutes before the current time. You can restore your table to any point in time during the last 35 days.
    
    You can call DescribeContinuousBackups at a maximum rate of 10 times per second.
    
    Specified by:
    
    describeContinuousBackupsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeContinuousBackups operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeContributorInsightsAsync
```
public Future<DescribeContributorInsightsResult> describeContributorInsightsAsync(DescribeContributorInsightsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns information about contributor insights, for a given table or global secondary index.
    
    Specified by:
    
    describeContributorInsightsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DescribeContributorInsights operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeContributorInsightsAsync
```
public Future<DescribeContributorInsightsResult> describeContributorInsightsAsync(DescribeContributorInsightsRequest request,
                                                                                  AsyncHandler<DescribeContributorInsightsRequest,DescribeContributorInsightsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns information about contributor insights, for a given table or global secondary index.
    
    Specified by:
    
    describeContributorInsightsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeContributorInsights operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeEndpointsAsync
```
public Future<DescribeEndpointsResult> describeEndpointsAsync(DescribeEndpointsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns the regional endpoint information.
    
    Specified by:
    
    describeEndpointsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DescribeEndpoints operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeEndpointsAsync
```
public Future<DescribeEndpointsResult> describeEndpointsAsync(DescribeEndpointsRequest request,
                                                              AsyncHandler<DescribeEndpointsRequest,DescribeEndpointsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns the regional endpoint information.
    
    Specified by:
    
    describeEndpointsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeEndpoints operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeExportAsync
```
public Future<DescribeExportResult> describeExportAsync(DescribeExportRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Describes an existing table export.
    
    Specified by:
    
    describeExportAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DescribeExport operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeExportAsync
```
public Future<DescribeExportResult> describeExportAsync(DescribeExportRequest request,
                                                        AsyncHandler<DescribeExportRequest,DescribeExportResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Describes an existing table export.
    
    Specified by:
    
    describeExportAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeExport operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeGlobalTableAsync
```
public Future<DescribeGlobalTableResult> describeGlobalTableAsync(DescribeGlobalTableRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns information about the specified global table.
    
    This operation only applies to Version 2017.11.29 of global tables. If you are using global tables Version 2019.11.21 you can use DescribeTable instead.
    
    Specified by:
    
    describeGlobalTableAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DescribeGlobalTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeGlobalTableAsync
```
public Future<DescribeGlobalTableResult> describeGlobalTableAsync(DescribeGlobalTableRequest request,
                                                                  AsyncHandler<DescribeGlobalTableRequest,DescribeGlobalTableResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns information about the specified global table.
    
    This operation only applies to Version 2017.11.29 of global tables. If you are using global tables Version 2019.11.21 you can use DescribeTable instead.
    
    Specified by:
    
    describeGlobalTableAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeGlobalTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeGlobalTableSettingsAsync
```
public Future<DescribeGlobalTableSettingsResult> describeGlobalTableSettingsAsync(DescribeGlobalTableSettingsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Describes Region-specific settings for a global table.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    Specified by:
    
    describeGlobalTableSettingsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DescribeGlobalTableSettings operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeGlobalTableSettingsAsync
```
public Future<DescribeGlobalTableSettingsResult> describeGlobalTableSettingsAsync(DescribeGlobalTableSettingsRequest request,
                                                                                  AsyncHandler<DescribeGlobalTableSettingsRequest,DescribeGlobalTableSettingsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Describes Region-specific settings for a global table.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    Specified by:
    
    describeGlobalTableSettingsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeGlobalTableSettings operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeKinesisStreamingDestinationAsync
```
public Future<DescribeKinesisStreamingDestinationResult> describeKinesisStreamingDestinationAsync(DescribeKinesisStreamingDestinationRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns information about the status of Kinesis streaming.
    
    Specified by:
    
    describeKinesisStreamingDestinationAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DescribeKinesisStreamingDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeKinesisStreamingDestinationAsync
```
public Future<DescribeKinesisStreamingDestinationResult> describeKinesisStreamingDestinationAsync(DescribeKinesisStreamingDestinationRequest request,
                                                                                                  AsyncHandler<DescribeKinesisStreamingDestinationRequest,DescribeKinesisStreamingDestinationResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns information about the status of Kinesis streaming.
    
    Specified by:
    
    describeKinesisStreamingDestinationAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeKinesisStreamingDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeLimitsAsync
```
public Future<DescribeLimitsResult> describeLimitsAsync(DescribeLimitsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    Returns the current provisioned-capacity quotas for your AWS account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there.
    
    When you establish an AWS account, the account has initial quotas on the maximum read capacity units and write capacity units that you can provision across all of your DynamoDB tables in a given Region. Also, there are per-table quotas that apply when you create a table there. For more information, see Service, Account, and Table Quotas page in the Amazon DynamoDB Developer Guide.
    
    Although you can increase these quotas by filing a case at AWS Support Center, obtaining the increase is not instantaneous. The DescribeLimits action lets you write code to compare the capacity you are currently using to those quotas imposed by your account so that you have enough time to apply for an increase before you hit a quota.
    
    For example, you could use one of the AWS SDKs to do the following:
    1. Call DescribeLimits for a particular Region to obtain your current account quotas on provisioned capacity there.
    2. Create a variable to hold the aggregate read capacity units provisioned for all your tables in that Region, and one to hold the aggregate write capacity units. Zero them both.
    3. Call ListTables to obtain a list of all your DynamoDB tables.
    4. For each table name listed by ListTables, do the following:
      
      Call DescribeTable with the table name.
      
      Use the data returned by DescribeTable to add the read capacity units and write capacity units provisioned for the table itself to your variables.
      
      If the table has one or more global secondary indexes (GSIs), loop over these GSIs and add their provisioned capacity values to your variables as well.
    5. Report the account quotas for that Region returned by DescribeLimits, along with the total current provisioned capacity levels you have calculated.
    This will let you see whether you are getting close to your account-level quotas.
    
    The per-table quotas apply only when you are creating a new table. They restrict the sum of the provisioned capacity of the new table itself and all its global secondary indexes.
    
    For existing tables and their GSIs, DynamoDB doesn't let you increase provisioned capacity extremely rapidly, but the only quota that applies is that the aggregate provisioned capacity over all your tables and GSIs cannot exceed either of the per-account quotas.
    
    DescribeLimits should only be called periodically. You can expect throttling errors if you call it more than once in a minute.
    
    The DescribeLimits Request element has no content.
    Specified by:
    
    describeLimitsAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a DescribeLimits operation. Has no content.
    
    Returns:
    
    A Java Future containing the result of the DescribeLimits operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeLimitsAsync
```
public Future<DescribeLimitsResult> describeLimitsAsync(DescribeLimitsRequest request,
                                                        AsyncHandler<DescribeLimitsRequest,DescribeLimitsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    Returns the current provisioned-capacity quotas for your AWS account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there.
    
    When you establish an AWS account, the account has initial quotas on the maximum read capacity units and write capacity units that you can provision across all of your DynamoDB tables in a given Region. Also, there are per-table quotas that apply when you create a table there. For more information, see Service, Account, and Table Quotas page in the Amazon DynamoDB Developer Guide.
    
    Although you can increase these quotas by filing a case at AWS Support Center, obtaining the increase is not instantaneous. The DescribeLimits action lets you write code to compare the capacity you are currently using to those quotas imposed by your account so that you have enough time to apply for an increase before you hit a quota.
    
    For example, you could use one of the AWS SDKs to do the following:
    1. Call DescribeLimits for a particular Region to obtain your current account quotas on provisioned capacity there.
    2. Create a variable to hold the aggregate read capacity units provisioned for all your tables in that Region, and one to hold the aggregate write capacity units. Zero them both.
    3. Call ListTables to obtain a list of all your DynamoDB tables.
    4. For each table name listed by ListTables, do the following:
      
      Call DescribeTable with the table name.
      
      Use the data returned by DescribeTable to add the read capacity units and write capacity units provisioned for the table itself to your variables.
      
      If the table has one or more global secondary indexes (GSIs), loop over these GSIs and add their provisioned capacity values to your variables as well.
    5. Report the account quotas for that Region returned by DescribeLimits, along with the total current provisioned capacity levels you have calculated.
    This will let you see whether you are getting close to your account-level quotas.
    
    The per-table quotas apply only when you are creating a new table. They restrict the sum of the provisioned capacity of the new table itself and all its global secondary indexes.
    
    For existing tables and their GSIs, DynamoDB doesn't let you increase provisioned capacity extremely rapidly, but the only quota that applies is that the aggregate provisioned capacity over all your tables and GSIs cannot exceed either of the per-account quotas.
    
    DescribeLimits should only be called periodically. You can expect throttling errors if you call it more than once in a minute.
    
    The DescribeLimits Request element has no content.
    Specified by:
    
    describeLimitsAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a DescribeLimits operation. Has no content.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeLimits operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeTableAsync
```
public Future<DescribeTableResult> describeTableAsync(DescribeTableRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
    
    If you issue a DescribeTable request immediately after a CreateTable request, DynamoDB might return a ResourceNotFoundException. This is because DescribeTable uses an eventually consistent query, and the metadata for your table might not be available at that moment. Wait for a few seconds, and then try the DescribeTable request again.
    
    Specified by:
    
    describeTableAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a DescribeTable operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeTableAsync
```
public Future<DescribeTableResult> describeTableAsync(DescribeTableRequest request,
                                                      AsyncHandler<DescribeTableRequest,DescribeTableResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
    
    If you issue a DescribeTable request immediately after a CreateTable request, DynamoDB might return a ResourceNotFoundException. This is because DescribeTable uses an eventually consistent query, and the metadata for your table might not be available at that moment. Wait for a few seconds, and then try the DescribeTable request again.
    
    Specified by:
    
    describeTableAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a DescribeTable operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeTableAsync
```
public Future<DescribeTableResult> describeTableAsync(String tableName)
```
    Simplified method form for invoking the DescribeTable operation.
    
    Specified by:
    
    describeTableAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    describeTableAsync(DescribeTableRequest)
  - describeTableAsync
```
public Future<DescribeTableResult> describeTableAsync(String tableName,
                                                      AsyncHandler<DescribeTableRequest,DescribeTableResult> asyncHandler)
```
    Simplified method form for invoking the DescribeTable operation with an AsyncHandler.
    
    Specified by:
    
    describeTableAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    describeTableAsync(DescribeTableRequest, com.amazonaws.handlers.AsyncHandler)
  - describeTableReplicaAutoScalingAsync
```
public Future<DescribeTableReplicaAutoScalingResult> describeTableReplicaAutoScalingAsync(DescribeTableReplicaAutoScalingRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Describes auto scaling settings across replicas of the global table at once.
    
    This operation only applies to Version 2019.11.21 of global tables.
    
    Specified by:
    
    describeTableReplicaAutoScalingAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DescribeTableReplicaAutoScaling operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeTableReplicaAutoScalingAsync
```
public Future<DescribeTableReplicaAutoScalingResult> describeTableReplicaAutoScalingAsync(DescribeTableReplicaAutoScalingRequest request,
                                                                                          AsyncHandler<DescribeTableReplicaAutoScalingRequest,DescribeTableReplicaAutoScalingResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Describes auto scaling settings across replicas of the global table at once.
    
    This operation only applies to Version 2019.11.21 of global tables.
    
    Specified by:
    
    describeTableReplicaAutoScalingAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeTableReplicaAutoScaling operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeTimeToLiveAsync
```
public Future<DescribeTimeToLiveResult> describeTimeToLiveAsync(DescribeTimeToLiveRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Gives a description of the Time to Live (TTL) status on the specified table.
    
    Specified by:
    
    describeTimeToLiveAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DescribeTimeToLive operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - describeTimeToLiveAsync
```
public Future<DescribeTimeToLiveResult> describeTimeToLiveAsync(DescribeTimeToLiveRequest request,
                                                                AsyncHandler<DescribeTimeToLiveRequest,DescribeTimeToLiveResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Gives a description of the Time to Live (TTL) status on the specified table.
    
    Specified by:
    
    describeTimeToLiveAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DescribeTimeToLive operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - disableKinesisStreamingDestinationAsync
```
public Future<DisableKinesisStreamingDestinationResult> disableKinesisStreamingDestinationAsync(DisableKinesisStreamingDestinationRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Stops replication from the DynamoDB table to the Kinesis data stream. This is done without deleting either of the resources.
    
    Specified by:
    
    disableKinesisStreamingDestinationAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the DisableKinesisStreamingDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - disableKinesisStreamingDestinationAsync
```
public Future<DisableKinesisStreamingDestinationResult> disableKinesisStreamingDestinationAsync(DisableKinesisStreamingDestinationRequest request,
                                                                                                AsyncHandler<DisableKinesisStreamingDestinationRequest,DisableKinesisStreamingDestinationResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Stops replication from the DynamoDB table to the Kinesis data stream. This is done without deleting either of the resources.
    
    Specified by:
    
    disableKinesisStreamingDestinationAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DisableKinesisStreamingDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - enableKinesisStreamingDestinationAsync
```
public Future<EnableKinesisStreamingDestinationResult> enableKinesisStreamingDestinationAsync(EnableKinesisStreamingDestinationRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Starts table data replication to the specified Kinesis data stream at a timestamp chosen during the enable workflow. If this operation doesn't return results immediately, use DescribeKinesisStreamingDestination to check if streaming to the Kinesis data stream is ACTIVE.
    
    Specified by:
    
    enableKinesisStreamingDestinationAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the EnableKinesisStreamingDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - enableKinesisStreamingDestinationAsync
```
public Future<EnableKinesisStreamingDestinationResult> enableKinesisStreamingDestinationAsync(EnableKinesisStreamingDestinationRequest request,
                                                                                              AsyncHandler<EnableKinesisStreamingDestinationRequest,EnableKinesisStreamingDestinationResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Starts table data replication to the specified Kinesis data stream at a timestamp chosen during the enable workflow. If this operation doesn't return results immediately, use DescribeKinesisStreamingDestination to check if streaming to the Kinesis data stream is ACTIVE.
    
    Specified by:
    
    enableKinesisStreamingDestinationAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the EnableKinesisStreamingDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - executeStatementAsync
```
public Future<ExecuteStatementResult> executeStatementAsync(ExecuteStatementRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    This operation allows you to perform reads and singleton writes on data stored in DynamoDB, using PartiQL.
    
    Specified by:
    
    executeStatementAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the ExecuteStatement operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - executeStatementAsync
```
public Future<ExecuteStatementResult> executeStatementAsync(ExecuteStatementRequest request,
                                                            AsyncHandler<ExecuteStatementRequest,ExecuteStatementResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    This operation allows you to perform reads and singleton writes on data stored in DynamoDB, using PartiQL.
    
    Specified by:
    
    executeStatementAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ExecuteStatement operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - executeTransactionAsync
```
public Future<ExecuteTransactionResult> executeTransactionAsync(ExecuteTransactionRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    This operation allows you to perform transactional reads or writes on data stored in DynamoDB, using PartiQL.
    
    Specified by:
    
    executeTransactionAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the ExecuteTransaction operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - executeTransactionAsync
```
public Future<ExecuteTransactionResult> executeTransactionAsync(ExecuteTransactionRequest request,
                                                                AsyncHandler<ExecuteTransactionRequest,ExecuteTransactionResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    This operation allows you to perform transactional reads or writes on data stored in DynamoDB, using PartiQL.
    
    Specified by:
    
    executeTransactionAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ExecuteTransaction operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - exportTableToPointInTimeAsync
```
public Future<ExportTableToPointInTimeResult> exportTableToPointInTimeAsync(ExportTableToPointInTimeRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Exports table data to an S3 bucket. The table must have point in time recovery enabled, and you can export data from any time within the point in time recovery window.
    
    Specified by:
    
    exportTableToPointInTimeAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the ExportTableToPointInTime operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - exportTableToPointInTimeAsync
```
public Future<ExportTableToPointInTimeResult> exportTableToPointInTimeAsync(ExportTableToPointInTimeRequest request,
                                                                            AsyncHandler<ExportTableToPointInTimeRequest,ExportTableToPointInTimeResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Exports table data to an S3 bucket. The table must have point in time recovery enabled, and you can export data from any time within the point in time recovery window.
    
    Specified by:
    
    exportTableToPointInTimeAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ExportTableToPointInTime operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getItemAsync
```
public Future<GetItemResult> getItemAsync(GetItemRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The GetItem operation returns a set of attributes for the item with the given primary key. If there is no matching item, GetItem does not return any data and there will be no Item element in the response.
    
    GetItem provides an eventually consistent read by default. If your application requires a strongly consistent read, set ConsistentRead to true. Although a strongly consistent read might take more time than an eventually consistent read, it always returns the last updated value.
    
    Specified by:
    
    getItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a GetItem operation.
    
    Returns:
    
    A Java Future containing the result of the GetItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getItemAsync
```
public Future<GetItemResult> getItemAsync(GetItemRequest request,
                                          AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The GetItem operation returns a set of attributes for the item with the given primary key. If there is no matching item, GetItem does not return any data and there will be no Item element in the response.
    
    GetItem provides an eventually consistent read by default. If your application requires a strongly consistent read, set ConsistentRead to true. Although a strongly consistent read might take more time than an eventually consistent read, it always returns the last updated value.
    
    Specified by:
    
    getItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a GetItem operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the GetItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getItemAsync
```
public Future<GetItemResult> getItemAsync(String tableName,
                                          Map<String,AttributeValue> key)
```
    Simplified method form for invoking the GetItem operation.
    
    Specified by:
    
    getItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    getItemAsync(GetItemRequest)
  - getItemAsync
```
public Future<GetItemResult> getItemAsync(String tableName,
                                          Map<String,AttributeValue> key,
                                          AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)
```
    Simplified method form for invoking the GetItem operation with an AsyncHandler.
    
    Specified by:
    
    getItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    getItemAsync(GetItemRequest, com.amazonaws.handlers.AsyncHandler)
  - getItemAsync
```
public Future<GetItemResult> getItemAsync(String tableName,
                                          Map<String,AttributeValue> key,
                                          Boolean consistentRead)
```
    Simplified method form for invoking the GetItem operation.
    
    Specified by:
    
    getItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    getItemAsync(GetItemRequest)
  - getItemAsync
```
public Future<GetItemResult> getItemAsync(String tableName,
                                          Map<String,AttributeValue> key,
                                          Boolean consistentRead,
                                          AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)
```
    Simplified method form for invoking the GetItem operation with an AsyncHandler.
    
    Specified by:
    
    getItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    getItemAsync(GetItemRequest, com.amazonaws.handlers.AsyncHandler)
  - listBackupsAsync
```
public Future<ListBackupsResult> listBackupsAsync(ListBackupsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    List backups associated with an AWS account. To list backups for a given table, specify TableName. ListBackups returns a paginated list of results with at most 1 MB worth of items in a page. You can also specify a maximum number of entries to be returned in a page.
    
    In the request, start time is inclusive, but end time is exclusive. Note that these boundaries are for the time at which the original backup was requested.
    
    You can call ListBackups a maximum of five times per second.
    
    Specified by:
    
    listBackupsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the ListBackups operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listBackupsAsync
```
public Future<ListBackupsResult> listBackupsAsync(ListBackupsRequest request,
                                                  AsyncHandler<ListBackupsRequest,ListBackupsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    List backups associated with an AWS account. To list backups for a given table, specify TableName. ListBackups returns a paginated list of results with at most 1 MB worth of items in a page. You can also specify a maximum number of entries to be returned in a page.
    
    In the request, start time is inclusive, but end time is exclusive. Note that these boundaries are for the time at which the original backup was requested.
    
    You can call ListBackups a maximum of five times per second.
    
    Specified by:
    
    listBackupsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ListBackups operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listContributorInsightsAsync
```
public Future<ListContributorInsightsResult> listContributorInsightsAsync(ListContributorInsightsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
    
    Specified by:
    
    listContributorInsightsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the ListContributorInsights operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listContributorInsightsAsync
```
public Future<ListContributorInsightsResult> listContributorInsightsAsync(ListContributorInsightsRequest request,
                                                                          AsyncHandler<ListContributorInsightsRequest,ListContributorInsightsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
    
    Specified by:
    
    listContributorInsightsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ListContributorInsights operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listExportsAsync
```
public Future<ListExportsResult> listExportsAsync(ListExportsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Lists completed exports within the past 90 days.
    
    Specified by:
    
    listExportsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the ListExports operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listExportsAsync
```
public Future<ListExportsResult> listExportsAsync(ListExportsRequest request,
                                                  AsyncHandler<ListExportsRequest,ListExportsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Lists completed exports within the past 90 days.
    
    Specified by:
    
    listExportsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ListExports operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listGlobalTablesAsync
```
public Future<ListGlobalTablesResult> listGlobalTablesAsync(ListGlobalTablesRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Lists all global tables that have a replica in the specified Region.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    Specified by:
    
    listGlobalTablesAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the ListGlobalTables operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listGlobalTablesAsync
```
public Future<ListGlobalTablesResult> listGlobalTablesAsync(ListGlobalTablesRequest request,
                                                            AsyncHandler<ListGlobalTablesRequest,ListGlobalTablesResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Lists all global tables that have a replica in the specified Region.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    Specified by:
    
    listGlobalTablesAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ListGlobalTables operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listTablesAsync
```
public Future<ListTablesResult> listTablesAsync(ListTablesRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.
    
    Specified by:
    
    listTablesAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a ListTables operation.
    
    Returns:
    
    A Java Future containing the result of the ListTables operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listTablesAsync
```
public Future<ListTablesResult> listTablesAsync(ListTablesRequest request,
                                                AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.
    
    Specified by:
    
    listTablesAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a ListTables operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ListTables operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listTablesAsync
```
public Future<ListTablesResult> listTablesAsync()
```
    Simplified method form for invoking the ListTables operation.
    
    Specified by:
    
    listTablesAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    listTablesAsync(ListTablesRequest)
  - listTablesAsync
```
public Future<ListTablesResult> listTablesAsync(AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
```
    Simplified method form for invoking the ListTables operation with an AsyncHandler.
    
    Specified by:
    
    listTablesAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    listTablesAsync(ListTablesRequest, com.amazonaws.handlers.AsyncHandler)
  - listTablesAsync
```
public Future<ListTablesResult> listTablesAsync(String exclusiveStartTableName)
```
    Simplified method form for invoking the ListTables operation.
    
    Specified by:
    
    listTablesAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    listTablesAsync(ListTablesRequest)
  - listTablesAsync
```
public Future<ListTablesResult> listTablesAsync(String exclusiveStartTableName,
                                                AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
```
    Simplified method form for invoking the ListTables operation with an AsyncHandler.
    
    Specified by:
    
    listTablesAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    listTablesAsync(ListTablesRequest, com.amazonaws.handlers.AsyncHandler)
  - listTablesAsync
```
public Future<ListTablesResult> listTablesAsync(String exclusiveStartTableName,
                                                Integer limit)
```
    Simplified method form for invoking the ListTables operation.
    
    Specified by:
    
    listTablesAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    listTablesAsync(ListTablesRequest)
  - listTablesAsync
```
public Future<ListTablesResult> listTablesAsync(String exclusiveStartTableName,
                                                Integer limit,
                                                AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
```
    Simplified method form for invoking the ListTables operation with an AsyncHandler.
    
    Specified by:
    
    listTablesAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    listTablesAsync(ListTablesRequest, com.amazonaws.handlers.AsyncHandler)
  - listTablesAsync
```
public Future<ListTablesResult> listTablesAsync(Integer limit)
```
    Simplified method form for invoking the ListTables operation.
    
    Specified by:
    
    listTablesAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    listTablesAsync(ListTablesRequest)
  - listTablesAsync
```
public Future<ListTablesResult> listTablesAsync(Integer limit,
                                                AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
```
    Simplified method form for invoking the ListTables operation with an AsyncHandler.
    
    Specified by:
    
    listTablesAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    listTablesAsync(ListTablesRequest, com.amazonaws.handlers.AsyncHandler)
  - listTagsOfResourceAsync
```
public Future<ListTagsOfResourceResult> listTagsOfResourceAsync(ListTagsOfResourceRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    List all tags on an Amazon DynamoDB resource. You can call ListTagsOfResource up to 10 times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    Specified by:
    
    listTagsOfResourceAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the ListTagsOfResource operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listTagsOfResourceAsync
```
public Future<ListTagsOfResourceResult> listTagsOfResourceAsync(ListTagsOfResourceRequest request,
                                                                AsyncHandler<ListTagsOfResourceRequest,ListTagsOfResourceResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    List all tags on an Amazon DynamoDB resource. You can call ListTagsOfResource up to 10 times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    Specified by:
    
    listTagsOfResourceAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ListTagsOfResource operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putItemAsync
```
public Future<PutItemResult> putItemAsync(PutItemRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    Creates a new item, or replaces an old item with a new item. If an item that has the same primary key as the new item already exists in the specified table, the new item completely replaces the existing item. You can perform a conditional put operation (add a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values. You can return the item's attribute values in the same operation, using the ReturnValues parameter.
    This topic provides general information about the PutItem API.
    
    For information on how to call the PutItem API using the AWS SDK in specific languages, see the following:
    
    PutItem in the AWS Command Line Interface
    
    PutItem in the AWS SDK for .NET
    
    PutItem in the AWS SDK for C++
    
    PutItem in the AWS SDK for Go
    
    PutItem in the AWS SDK for Java
    
    PutItem in the AWS SDK for JavaScript
    
    PutItem in the AWS SDK for PHP V3
    
    PutItem in the AWS SDK for Python
    
    PutItem in the AWS SDK for Ruby V2
    When you add an item, the primary key attributes are the only required attributes. Attribute values cannot be null.
    
    Empty String and Binary attribute values are allowed. Attribute values of type String and Binary must have a length greater than zero if the attribute is used as a key attribute for a table or index. Set type attributes cannot be empty.
    
    Invalid Requests with empty values will be rejected with a ValidationException exception.
    
    To prevent a new item from replacing an existing item, use a conditional expression that contains the attribute_not_exists function with the name of the attribute being used as the partition key for the table. Since every record must contain that attribute, the attribute_not_exists function will only succeed if no matching item exists.
    
    For more information about PutItem, see Working with Items in the Amazon DynamoDB Developer Guide.
    Specified by:
    
    putItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a PutItem operation.
    
    Returns:
    
    A Java Future containing the result of the PutItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putItemAsync
```
public Future<PutItemResult> putItemAsync(PutItemRequest request,
                                          AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    Creates a new item, or replaces an old item with a new item. If an item that has the same primary key as the new item already exists in the specified table, the new item completely replaces the existing item. You can perform a conditional put operation (add a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values. You can return the item's attribute values in the same operation, using the ReturnValues parameter.
    This topic provides general information about the PutItem API.
    
    For information on how to call the PutItem API using the AWS SDK in specific languages, see the following:
    
    PutItem in the AWS Command Line Interface
    
    PutItem in the AWS SDK for .NET
    
    PutItem in the AWS SDK for C++
    
    PutItem in the AWS SDK for Go
    
    PutItem in the AWS SDK for Java
    
    PutItem in the AWS SDK for JavaScript
    
    PutItem in the AWS SDK for PHP V3
    
    PutItem in the AWS SDK for Python
    
    PutItem in the AWS SDK for Ruby V2
    When you add an item, the primary key attributes are the only required attributes. Attribute values cannot be null.
    
    Empty String and Binary attribute values are allowed. Attribute values of type String and Binary must have a length greater than zero if the attribute is used as a key attribute for a table or index. Set type attributes cannot be empty.
    
    Invalid Requests with empty values will be rejected with a ValidationException exception.
    
    To prevent a new item from replacing an existing item, use a conditional expression that contains the attribute_not_exists function with the name of the attribute being used as the partition key for the table. Since every record must contain that attribute, the attribute_not_exists function will only succeed if no matching item exists.
    
    For more information about PutItem, see Working with Items in the Amazon DynamoDB Developer Guide.
    Specified by:
    
    putItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a PutItem operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the PutItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putItemAsync
```
public Future<PutItemResult> putItemAsync(String tableName,
                                          Map<String,AttributeValue> item)
```
    Simplified method form for invoking the PutItem operation.
    
    Specified by:
    
    putItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    putItemAsync(PutItemRequest)
  - putItemAsync
```
public Future<PutItemResult> putItemAsync(String tableName,
                                          Map<String,AttributeValue> item,
                                          AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)
```
    Simplified method form for invoking the PutItem operation with an AsyncHandler.
    
    Specified by:
    
    putItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    putItemAsync(PutItemRequest, com.amazonaws.handlers.AsyncHandler)
  - putItemAsync
```
public Future<PutItemResult> putItemAsync(String tableName,
                                          Map<String,AttributeValue> item,
                                          String returnValues)
```
    Simplified method form for invoking the PutItem operation.
    
    Specified by:
    
    putItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    putItemAsync(PutItemRequest)
  - putItemAsync
```
public Future<PutItemResult> putItemAsync(String tableName,
                                          Map<String,AttributeValue> item,
                                          String returnValues,
                                          AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)
```
    Simplified method form for invoking the PutItem operation with an AsyncHandler.
    
    Specified by:
    
    putItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    putItemAsync(PutItemRequest, com.amazonaws.handlers.AsyncHandler)
  - queryAsync
```
public Future<QueryResult> queryAsync(QueryRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The Query operation finds items based on primary key values. You can query any table or secondary index that has a composite primary key (a partition key and a sort key).
    
    Use the KeyConditionExpression parameter to provide a specific value for the partition key. The Query operation will return all of the items from the table or index with that partition key value. You can optionally narrow the scope of the Query operation by specifying a sort key value and a comparison operator in KeyConditionExpression. To further refine the Query results, you can optionally provide a FilterExpression. A FilterExpression determines which items within the results should be returned to you. All of the other results are discarded.
    
    A Query operation always returns a result set. If no matching items are found, the result set will be empty. Queries that do not return results consume the minimum number of read capacity units for that type of read operation.
    
    DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. The number of capacity units consumed will be the same whether you request all of the attributes (the default behavior) or just some of them (using a projection expression). The number will also be the same whether or not you use a FilterExpression.
    
    Query results are always sorted by the sort key value. If the data type of the sort key is Number, the results are returned in numeric order; otherwise, the results are returned in order of UTF-8 bytes. By default, the sort order is ascending. To reverse the order, set the ScanIndexForward parameter to false.
    
    A single Query operation will read up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you will need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    FilterExpression is applied after a Query finishes, but before the results are returned. A FilterExpression cannot contain partition key or sort key attributes. You need to specify those attributes in the KeyConditionExpression.
    
    A Query operation can return an empty result set and a LastEvaluatedKey if all the items read for the page of results are filtered out.
    
    You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set the ConsistentRead parameter to true and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify ConsistentRead when querying a global secondary index.
    
    Specified by:
    
    queryAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a Query operation.
    
    Returns:
    
    A Java Future containing the result of the Query operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - queryAsync
```
public Future<QueryResult> queryAsync(QueryRequest request,
                                      AsyncHandler<QueryRequest,QueryResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The Query operation finds items based on primary key values. You can query any table or secondary index that has a composite primary key (a partition key and a sort key).
    
    Use the KeyConditionExpression parameter to provide a specific value for the partition key. The Query operation will return all of the items from the table or index with that partition key value. You can optionally narrow the scope of the Query operation by specifying a sort key value and a comparison operator in KeyConditionExpression. To further refine the Query results, you can optionally provide a FilterExpression. A FilterExpression determines which items within the results should be returned to you. All of the other results are discarded.
    
    A Query operation always returns a result set. If no matching items are found, the result set will be empty. Queries that do not return results consume the minimum number of read capacity units for that type of read operation.
    
    DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. The number of capacity units consumed will be the same whether you request all of the attributes (the default behavior) or just some of them (using a projection expression). The number will also be the same whether or not you use a FilterExpression.
    
    Query results are always sorted by the sort key value. If the data type of the sort key is Number, the results are returned in numeric order; otherwise, the results are returned in order of UTF-8 bytes. By default, the sort order is ascending. To reverse the order, set the ScanIndexForward parameter to false.
    
    A single Query operation will read up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you will need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    FilterExpression is applied after a Query finishes, but before the results are returned. A FilterExpression cannot contain partition key or sort key attributes. You need to specify those attributes in the KeyConditionExpression.
    
    A Query operation can return an empty result set and a LastEvaluatedKey if all the items read for the page of results are filtered out.
    
    You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set the ConsistentRead parameter to true and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify ConsistentRead when querying a global secondary index.
    
    Specified by:
    
    queryAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a Query operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the Query operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - restoreTableFromBackupAsync
```
public Future<RestoreTableFromBackupResult> restoreTableFromBackupAsync(RestoreTableFromBackupRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    Creates a new table from an existing backup. Any number of users can execute up to 4 concurrent restores (any type of restore) in a given account.
    
    You can call RestoreTableFromBackup at a maximum rate of 10 times per second.
    
    You must manually set up the following on the restored table:
    - Auto scaling policies
    - IAM policies
    - Amazon CloudWatch metrics and alarms
    - Tags
    - Stream settings
    - Time to Live (TTL) settings
    Specified by:
    
    restoreTableFromBackupAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the RestoreTableFromBackup operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - restoreTableFromBackupAsync
```
public Future<RestoreTableFromBackupResult> restoreTableFromBackupAsync(RestoreTableFromBackupRequest request,
                                                                        AsyncHandler<RestoreTableFromBackupRequest,RestoreTableFromBackupResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    Creates a new table from an existing backup. Any number of users can execute up to 4 concurrent restores (any type of restore) in a given account.
    
    You can call RestoreTableFromBackup at a maximum rate of 10 times per second.
    
    You must manually set up the following on the restored table:
    - Auto scaling policies
    - IAM policies
    - Amazon CloudWatch metrics and alarms
    - Tags
    - Stream settings
    - Time to Live (TTL) settings
    Specified by:
    
    restoreTableFromBackupAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the RestoreTableFromBackup operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - restoreTableToPointInTimeAsync
```
public Future<RestoreTableToPointInTimeResult> restoreTableToPointInTimeAsync(RestoreTableToPointInTimeRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    Restores the specified table to the specified point in time within EarliestRestorableDateTime and LatestRestorableDateTime. You can restore your table to any point in time during the last 35 days. Any number of users can execute up to 4 concurrent restores (any type of restore) in a given account.
    
    When you restore using point in time recovery, DynamoDB restores your table data to the state based on the selected date and time (day:hour:minute:second) to a new table.
    
    Along with data, the following are also included on the new restored table using point in time recovery:
    - Global secondary indexes (GSIs)
    - Local secondary indexes (LSIs)
    - Provisioned read and write capacity
    - Encryption settings
      
      All these settings come from the current settings of the source table at the time of restore.
    You must manually set up the following on the restored table:
    - Auto scaling policies
    - IAM policies
    - Amazon CloudWatch metrics and alarms
    - Tags
    - Stream settings
    - Time to Live (TTL) settings
    - Point in time recovery settings
    Specified by:
    
    restoreTableToPointInTimeAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the RestoreTableToPointInTime operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - restoreTableToPointInTimeAsync
```
public Future<RestoreTableToPointInTimeResult> restoreTableToPointInTimeAsync(RestoreTableToPointInTimeRequest request,
                                                                              AsyncHandler<RestoreTableToPointInTimeRequest,RestoreTableToPointInTimeResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    Restores the specified table to the specified point in time within EarliestRestorableDateTime and LatestRestorableDateTime. You can restore your table to any point in time during the last 35 days. Any number of users can execute up to 4 concurrent restores (any type of restore) in a given account.
    
    When you restore using point in time recovery, DynamoDB restores your table data to the state based on the selected date and time (day:hour:minute:second) to a new table.
    
    Along with data, the following are also included on the new restored table using point in time recovery:
    - Global secondary indexes (GSIs)
    - Local secondary indexes (LSIs)
    - Provisioned read and write capacity
    - Encryption settings
      
      All these settings come from the current settings of the source table at the time of restore.
    You must manually set up the following on the restored table:
    - Auto scaling policies
    - IAM policies
    - Amazon CloudWatch metrics and alarms
    - Tags
    - Stream settings
    - Time to Live (TTL) settings
    - Point in time recovery settings
    Specified by:
    
    restoreTableToPointInTimeAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the RestoreTableToPointInTime operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - scanAsync
```
public Future<ScanResult> scanAsync(ScanRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The Scan operation returns one or more items and item attributes by accessing every item in a table or a secondary index. To have DynamoDB return fewer items, you can provide a FilterExpression operation.
    
    If the total number of scanned items exceeds the maximum dataset size limit of 1 MB, the scan stops and results are returned to the user as a LastEvaluatedKey value to continue the scan in a subsequent operation. The results also include the number of items exceeding the limit. A scan can result in no table data meeting the filter criteria.
    
    A single Scan operation reads up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    Scan operations proceed sequentially; however, for faster performance on a large table or secondary index, applications can request a parallel Scan operation by providing the Segment and TotalSegments parameters. For more information, see Parallel Scan in the Amazon DynamoDB Developer Guide.
    
    Scan uses eventually consistent reads when accessing the data in a table; therefore, the result set might not include the changes to data in the table immediately before the operation began. If you need a consistent copy of the data, as of the time that the Scan begins, you can set the ConsistentRead parameter to true.
    
    Specified by:
    
    scanAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a Scan operation.
    
    Returns:
    
    A Java Future containing the result of the Scan operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - scanAsync
```
public Future<ScanResult> scanAsync(ScanRequest request,
                                    AsyncHandler<ScanRequest,ScanResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The Scan operation returns one or more items and item attributes by accessing every item in a table or a secondary index. To have DynamoDB return fewer items, you can provide a FilterExpression operation.
    
    If the total number of scanned items exceeds the maximum dataset size limit of 1 MB, the scan stops and results are returned to the user as a LastEvaluatedKey value to continue the scan in a subsequent operation. The results also include the number of items exceeding the limit. A scan can result in no table data meeting the filter criteria.
    
    A single Scan operation reads up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    Scan operations proceed sequentially; however, for faster performance on a large table or secondary index, applications can request a parallel Scan operation by providing the Segment and TotalSegments parameters. For more information, see Parallel Scan in the Amazon DynamoDB Developer Guide.
    
    Scan uses eventually consistent reads when accessing the data in a table; therefore, the result set might not include the changes to data in the table immediately before the operation began. If you need a consistent copy of the data, as of the time that the Scan begins, you can set the ConsistentRead parameter to true.
    
    Specified by:
    
    scanAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of a Scan operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the Scan operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - scanAsync
```
public Future<ScanResult> scanAsync(String tableName,
                                    List<String> attributesToGet)
```
    Simplified method form for invoking the Scan operation.
    
    Specified by:
    
    scanAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    scanAsync(ScanRequest)
  - scanAsync
```
public Future<ScanResult> scanAsync(String tableName,
                                    List<String> attributesToGet,
                                    AsyncHandler<ScanRequest,ScanResult> asyncHandler)
```
    Simplified method form for invoking the Scan operation with an AsyncHandler.
    
    Specified by:
    
    scanAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    scanAsync(ScanRequest, com.amazonaws.handlers.AsyncHandler)
  - scanAsync
```
public Future<ScanResult> scanAsync(String tableName,
                                    Map<String,Condition> scanFilter)
```
    Simplified method form for invoking the Scan operation.
    
    Specified by:
    
    scanAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    scanAsync(ScanRequest)
  - scanAsync
```
public Future<ScanResult> scanAsync(String tableName,
                                    Map<String,Condition> scanFilter,
                                    AsyncHandler<ScanRequest,ScanResult> asyncHandler)
```
    Simplified method form for invoking the Scan operation with an AsyncHandler.
    
    Specified by:
    
    scanAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    scanAsync(ScanRequest, com.amazonaws.handlers.AsyncHandler)
  - scanAsync
```
public Future<ScanResult> scanAsync(String tableName,
                                    List<String> attributesToGet,
                                    Map<String,Condition> scanFilter)
```
    Simplified method form for invoking the Scan operation.
    
    Specified by:
    
    scanAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    scanAsync(ScanRequest)
  - scanAsync
```
public Future<ScanResult> scanAsync(String tableName,
                                    List<String> attributesToGet,
                                    Map<String,Condition> scanFilter,
                                    AsyncHandler<ScanRequest,ScanResult> asyncHandler)
```
    Simplified method form for invoking the Scan operation with an AsyncHandler.
    
    Specified by:
    
    scanAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    scanAsync(ScanRequest, com.amazonaws.handlers.AsyncHandler)
  - tagResourceAsync
```
public Future<TagResourceResult> tagResourceAsync(TagResourceRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Associate a set of tags with an Amazon DynamoDB resource. You can then activate these user-defined tags so that they appear on the Billing and Cost Management console for cost allocation tracking. You can call TagResource up to five times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    Specified by:
    
    tagResourceAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the TagResource operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - tagResourceAsync
```
public Future<TagResourceResult> tagResourceAsync(TagResourceRequest request,
                                                  AsyncHandler<TagResourceRequest,TagResourceResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Associate a set of tags with an Amazon DynamoDB resource. You can then activate these user-defined tags so that they appear on the Billing and Cost Management console for cost allocation tracking. You can call TagResource up to five times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    Specified by:
    
    tagResourceAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the TagResource operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - transactGetItemsAsync
```
public Future<TransactGetItemsResult> transactGetItemsAsync(TransactGetItemsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    TransactGetItems is a synchronous operation that atomically retrieves multiple items from one or more tables (but not from indexes) in a single account and Region. A TransactGetItems call can contain up to 25 TransactGetItem objects, each of which contains a Get structure that specifies an item to retrieve from a table in the account and Region. A call to TransactGetItems cannot retrieve items from tables in more than one AWS account or Region. The aggregate size of the items in the transaction cannot exceed 4 MB.
    
    DynamoDB rejects the entire TransactGetItems request if any of the following is true:
    - A conflicting operation is in the process of updating an item to be read.
    - There is insufficient provisioned capacity for the transaction to be completed.
    - There is a user error, such as an invalid data format.
    - The aggregate size of the items in the transaction cannot exceed 4 MB.
    Specified by:
    
    transactGetItemsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the TransactGetItems operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - transactGetItemsAsync
```
public Future<TransactGetItemsResult> transactGetItemsAsync(TransactGetItemsRequest request,
                                                            AsyncHandler<TransactGetItemsRequest,TransactGetItemsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    TransactGetItems is a synchronous operation that atomically retrieves multiple items from one or more tables (but not from indexes) in a single account and Region. A TransactGetItems call can contain up to 25 TransactGetItem objects, each of which contains a Get structure that specifies an item to retrieve from a table in the account and Region. A call to TransactGetItems cannot retrieve items from tables in more than one AWS account or Region. The aggregate size of the items in the transaction cannot exceed 4 MB.
    
    DynamoDB rejects the entire TransactGetItems request if any of the following is true:
    - A conflicting operation is in the process of updating an item to be read.
    - There is insufficient provisioned capacity for the transaction to be completed.
    - There is a user error, such as an invalid data format.
    - The aggregate size of the items in the transaction cannot exceed 4 MB.
    Specified by:
    
    transactGetItemsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the TransactGetItems operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - transactWriteItemsAsync
```
public Future<TransactWriteItemsResult> transactWriteItemsAsync(TransactWriteItemsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    TransactWriteItems is a synchronous write operation that groups up to 25 action requests. These actions can target items in different tables, but not in different AWS accounts or Regions, and no two actions can target the same item. For example, you cannot both ConditionCheck and Update the same item. The aggregate size of the items in the transaction cannot exceed 4 MB.
    
    The actions are completed atomically so that either all of them succeed, or all of them fail. They are defined by the following objects:
    - Put — Initiates a PutItem operation to write a new item. This structure specifies the primary key of the item to be written, the name of the table to write it in, an optional condition expression that must be satisfied for the write to succeed, a list of the item's attributes, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - Update — Initiates an UpdateItem operation to update an existing item. This structure specifies the primary key of the item to be updated, the name of the table where it resides, an optional condition expression that must be satisfied for the update to succeed, an expression that defines one or more attributes to be updated, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - Delete — Initiates a DeleteItem operation to delete an existing item. This structure specifies the primary key of the item to be deleted, the name of the table where it resides, an optional condition expression that must be satisfied for the deletion to succeed, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - ConditionCheck — Applies a condition to an item that is not being modified by the transaction. This structure specifies the primary key of the item to be checked, the name of the table where it resides, a condition expression that must be satisfied for the transaction to succeed, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    DynamoDB rejects the entire TransactWriteItems request if any of the following is true:
    - A condition in one of the condition expressions is not met.
    - An ongoing operation is in the process of updating the same item.
    - There is insufficient provisioned capacity for the transaction to be completed.
    - An item size becomes too large (bigger than 400 KB), a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
    - The aggregate size of the items in the transaction exceeds 4 MB.
    - There is a user error, such as an invalid data format.
    Specified by:
    
    transactWriteItemsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the TransactWriteItems operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - transactWriteItemsAsync
```
public Future<TransactWriteItemsResult> transactWriteItemsAsync(TransactWriteItemsRequest request,
                                                                AsyncHandler<TransactWriteItemsRequest,TransactWriteItemsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    TransactWriteItems is a synchronous write operation that groups up to 25 action requests. These actions can target items in different tables, but not in different AWS accounts or Regions, and no two actions can target the same item. For example, you cannot both ConditionCheck and Update the same item. The aggregate size of the items in the transaction cannot exceed 4 MB.
    
    The actions are completed atomically so that either all of them succeed, or all of them fail. They are defined by the following objects:
    - Put — Initiates a PutItem operation to write a new item. This structure specifies the primary key of the item to be written, the name of the table to write it in, an optional condition expression that must be satisfied for the write to succeed, a list of the item's attributes, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - Update — Initiates an UpdateItem operation to update an existing item. This structure specifies the primary key of the item to be updated, the name of the table where it resides, an optional condition expression that must be satisfied for the update to succeed, an expression that defines one or more attributes to be updated, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - Delete — Initiates a DeleteItem operation to delete an existing item. This structure specifies the primary key of the item to be deleted, the name of the table where it resides, an optional condition expression that must be satisfied for the deletion to succeed, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - ConditionCheck — Applies a condition to an item that is not being modified by the transaction. This structure specifies the primary key of the item to be checked, the name of the table where it resides, a condition expression that must be satisfied for the transaction to succeed, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    DynamoDB rejects the entire TransactWriteItems request if any of the following is true:
    - A condition in one of the condition expressions is not met.
    - An ongoing operation is in the process of updating the same item.
    - There is insufficient provisioned capacity for the transaction to be completed.
    - An item size becomes too large (bigger than 400 KB), a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
    - The aggregate size of the items in the transaction exceeds 4 MB.
    - There is a user error, such as an invalid data format.
    Specified by:
    
    transactWriteItemsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the TransactWriteItems operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - untagResourceAsync
```
public Future<UntagResourceResult> untagResourceAsync(UntagResourceRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Removes the association of tags from an Amazon DynamoDB resource. You can call UntagResource up to five times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    Specified by:
    
    untagResourceAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the UntagResource operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - untagResourceAsync
```
public Future<UntagResourceResult> untagResourceAsync(UntagResourceRequest request,
                                                      AsyncHandler<UntagResourceRequest,UntagResourceResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Removes the association of tags from an Amazon DynamoDB resource. You can call UntagResource up to five times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    Specified by:
    
    untagResourceAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the UntagResource operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateContinuousBackupsAsync
```
public Future<UpdateContinuousBackupsResult> updateContinuousBackupsAsync(UpdateContinuousBackupsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    UpdateContinuousBackups enables or disables point in time recovery for the specified table. A successful UpdateContinuousBackups call returns the current ContinuousBackupsDescription. Continuous backups are ENABLED on all tables at table creation. If point in time recovery is enabled, PointInTimeRecoveryStatus will be set to ENABLED.
    
    Once continuous backups and point in time recovery are enabled, you can restore to any point in time within EarliestRestorableDateTime and LatestRestorableDateTime.
    
    LatestRestorableDateTime is typically 5 minutes before the current time. You can restore your table to any point in time during the last 35 days.
    
    Specified by:
    
    updateContinuousBackupsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the UpdateContinuousBackups operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateContinuousBackupsAsync
```
public Future<UpdateContinuousBackupsResult> updateContinuousBackupsAsync(UpdateContinuousBackupsRequest request,
                                                                          AsyncHandler<UpdateContinuousBackupsRequest,UpdateContinuousBackupsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    UpdateContinuousBackups enables or disables point in time recovery for the specified table. A successful UpdateContinuousBackups call returns the current ContinuousBackupsDescription. Continuous backups are ENABLED on all tables at table creation. If point in time recovery is enabled, PointInTimeRecoveryStatus will be set to ENABLED.
    
    Once continuous backups and point in time recovery are enabled, you can restore to any point in time within EarliestRestorableDateTime and LatestRestorableDateTime.
    
    LatestRestorableDateTime is typically 5 minutes before the current time. You can restore your table to any point in time during the last 35 days.
    
    Specified by:
    
    updateContinuousBackupsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateContinuousBackups operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateContributorInsightsAsync
```
public Future<UpdateContributorInsightsResult> updateContributorInsightsAsync(UpdateContributorInsightsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Updates the status for contributor insights for a specific table or index.
    
    Specified by:
    
    updateContributorInsightsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the UpdateContributorInsights operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateContributorInsightsAsync
```
public Future<UpdateContributorInsightsResult> updateContributorInsightsAsync(UpdateContributorInsightsRequest request,
                                                                              AsyncHandler<UpdateContributorInsightsRequest,UpdateContributorInsightsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Updates the status for contributor insights for a specific table or index.
    
    Specified by:
    
    updateContributorInsightsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateContributorInsights operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateGlobalTableAsync
```
public Future<UpdateGlobalTableResult> updateGlobalTableAsync(UpdateGlobalTableRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    Adds or removes replicas in the specified global table. The global table must already exist to be able to use this operation. Any replica to be added must be empty, have the same name as the global table, have the same key schema, have DynamoDB Streams enabled, and have the same provisioned and maximum write capacity units.
    
    Although you can use UpdateGlobalTable to add replicas and remove replicas in a single request, for simplicity we recommend that you issue separate requests for adding or removing replicas.
    
    If global secondary indexes are specified, then the following conditions must also be met:
    - The global secondary indexes must have the same name.
    - The global secondary indexes must have the same hash key and sort key (if present).
    - The global secondary indexes must have the same provisioned and maximum write capacity units.
    Specified by:
    
    updateGlobalTableAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the UpdateGlobalTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateGlobalTableAsync
```
public Future<UpdateGlobalTableResult> updateGlobalTableAsync(UpdateGlobalTableRequest request,
                                                              AsyncHandler<UpdateGlobalTableRequest,UpdateGlobalTableResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    Adds or removes replicas in the specified global table. The global table must already exist to be able to use this operation. Any replica to be added must be empty, have the same name as the global table, have the same key schema, have DynamoDB Streams enabled, and have the same provisioned and maximum write capacity units.
    
    Although you can use UpdateGlobalTable to add replicas and remove replicas in a single request, for simplicity we recommend that you issue separate requests for adding or removing replicas.
    
    If global secondary indexes are specified, then the following conditions must also be met:
    - The global secondary indexes must have the same name.
    - The global secondary indexes must have the same hash key and sort key (if present).
    - The global secondary indexes must have the same provisioned and maximum write capacity units.
    Specified by:
    
    updateGlobalTableAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateGlobalTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateGlobalTableSettingsAsync
```
public Future<UpdateGlobalTableSettingsResult> updateGlobalTableSettingsAsync(UpdateGlobalTableSettingsRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Updates settings for a global table.
    
    Specified by:
    
    updateGlobalTableSettingsAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the UpdateGlobalTableSettings operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateGlobalTableSettingsAsync
```
public Future<UpdateGlobalTableSettingsResult> updateGlobalTableSettingsAsync(UpdateGlobalTableSettingsRequest request,
                                                                              AsyncHandler<UpdateGlobalTableSettingsRequest,UpdateGlobalTableSettingsResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Updates settings for a global table.
    
    Specified by:
    
    updateGlobalTableSettingsAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateGlobalTableSettings operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateItemAsync
```
public Future<UpdateItemResult> updateItemAsync(UpdateItemRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Edits an existing item's attributes, or adds a new item to the table if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update on an existing item (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).
    
    You can also return the item's attribute values in the same UpdateItem operation using the ReturnValues parameter.
    
    Specified by:
    
    updateItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of an UpdateItem operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateItemAsync
```
public Future<UpdateItemResult> updateItemAsync(UpdateItemRequest request,
                                                AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Edits an existing item's attributes, or adds a new item to the table if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update on an existing item (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).
    
    You can also return the item's attribute values in the same UpdateItem operation using the ReturnValues parameter.
    
    Specified by:
    
    updateItemAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of an UpdateItem operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateItem operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateItemAsync
```
public Future<UpdateItemResult> updateItemAsync(String tableName,
                                                Map<String,AttributeValue> key,
                                                Map<String,AttributeValueUpdate> attributeUpdates)
```
    Simplified method form for invoking the UpdateItem operation.
    
    Specified by:
    
    updateItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    updateItemAsync(UpdateItemRequest)
  - updateItemAsync
```
public Future<UpdateItemResult> updateItemAsync(String tableName,
                                                Map<String,AttributeValue> key,
                                                Map<String,AttributeValueUpdate> attributeUpdates,
                                                AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)
```
    Simplified method form for invoking the UpdateItem operation with an AsyncHandler.
    
    Specified by:
    
    updateItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    updateItemAsync(UpdateItemRequest, com.amazonaws.handlers.AsyncHandler)
  - updateItemAsync
```
public Future<UpdateItemResult> updateItemAsync(String tableName,
                                                Map<String,AttributeValue> key,
                                                Map<String,AttributeValueUpdate> attributeUpdates,
                                                String returnValues)
```
    Simplified method form for invoking the UpdateItem operation.
    
    Specified by:
    
    updateItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    updateItemAsync(UpdateItemRequest)
  - updateItemAsync
```
public Future<UpdateItemResult> updateItemAsync(String tableName,
                                                Map<String,AttributeValue> key,
                                                Map<String,AttributeValueUpdate> attributeUpdates,
                                                String returnValues,
                                                AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)
```
    Simplified method form for invoking the UpdateItem operation with an AsyncHandler.
    
    Specified by:
    
    updateItemAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    updateItemAsync(UpdateItemRequest, com.amazonaws.handlers.AsyncHandler)
  - updateTableAsync
```
public Future<UpdateTableResult> updateTableAsync(UpdateTableRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.
    
    You can only perform one of the following operations at once:
    - Modify the provisioned throughput settings of the table.
    - Enable or disable DynamoDB Streams on the table.
    - Remove a global secondary index from the table.
    - Create a new global secondary index on the table. After the index begins backfilling, you can use UpdateTable to perform other operations.
    UpdateTable is an asynchronous operation; while it is executing, the table status changes from ACTIVE to UPDATING. While it is UPDATING, you cannot issue another UpdateTable request. When the table returns to the ACTIVE state, the UpdateTable operation is complete.
    Specified by:
    
    updateTableAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of an UpdateTable operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateTableAsync
```
public Future<UpdateTableResult> updateTableAsync(UpdateTableRequest request,
                                                  AsyncHandler<UpdateTableRequest,UpdateTableResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.
    
    You can only perform one of the following operations at once:
    - Modify the provisioned throughput settings of the table.
    - Enable or disable DynamoDB Streams on the table.
    - Remove a global secondary index from the table.
    - Create a new global secondary index on the table. After the index begins backfilling, you can use UpdateTable to perform other operations.
    UpdateTable is an asynchronous operation; while it is executing, the table status changes from ACTIVE to UPDATING. While it is UPDATING, you cannot issue another UpdateTable request. When the table returns to the ACTIVE state, the UpdateTable operation is complete.
    Specified by:
    
    updateTableAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of an UpdateTable operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateTable operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateTableAsync
```
public Future<UpdateTableResult> updateTableAsync(String tableName,
                                                  ProvisionedThroughput provisionedThroughput)
```
    Simplified method form for invoking the UpdateTable operation.
    
    Specified by:
    
    updateTableAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    updateTableAsync(UpdateTableRequest)
  - updateTableAsync
```
public Future<UpdateTableResult> updateTableAsync(String tableName,
                                                  ProvisionedThroughput provisionedThroughput,
                                                  AsyncHandler<UpdateTableRequest,UpdateTableResult> asyncHandler)
```
    Simplified method form for invoking the UpdateTable operation with an AsyncHandler.
    
    Specified by:
    
    updateTableAsync in interface AmazonDynamoDBAsync
    
    See Also:
    
    updateTableAsync(UpdateTableRequest, com.amazonaws.handlers.AsyncHandler)
  - updateTableReplicaAutoScalingAsync
```
public Future<UpdateTableReplicaAutoScalingResult> updateTableReplicaAutoScalingAsync(UpdateTableReplicaAutoScalingRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Updates auto scaling settings on your global tables at once.
    
    This operation only applies to Version 2019.11.21 of global tables.
    
    Specified by:
    
    updateTableReplicaAutoScalingAsync in interface AmazonDynamoDBAsync
    
    Returns:
    
    A Java Future containing the result of the UpdateTableReplicaAutoScaling operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateTableReplicaAutoScalingAsync
```
public Future<UpdateTableReplicaAutoScalingResult> updateTableReplicaAutoScalingAsync(UpdateTableReplicaAutoScalingRequest request,
                                                                                      AsyncHandler<UpdateTableReplicaAutoScalingRequest,UpdateTableReplicaAutoScalingResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    Updates auto scaling settings on your global tables at once.
    
    This operation only applies to Version 2019.11.21 of global tables.
    
    Specified by:
    
    updateTableReplicaAutoScalingAsync in interface AmazonDynamoDBAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateTableReplicaAutoScaling operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateTimeToLiveAsync
```
public Future<UpdateTimeToLiveResult> updateTimeToLiveAsync(UpdateTimeToLiveRequest request)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The UpdateTimeToLive method enables or disables Time to Live (TTL) for the specified table. A successful UpdateTimeToLive call returns the current TimeToLiveSpecification. It can take up to one hour for the change to fully process. Any additional UpdateTimeToLive calls for the same table during this one hour duration result in a ValidationException.
    
    TTL compares the current time in epoch time format to the time stored in the TTL attribute of an item. If the epoch time value stored in the attribute is less than the current time, the item is marked as expired and subsequently deleted.
    
    The epoch time format is the number of seconds elapsed since 12:00:00 AM January 1, 1970 UTC.
    
    DynamoDB deletes expired items on a best-effort basis to ensure availability of throughput for other data operations.
    
    DynamoDB typically deletes expired items within two days of expiration. The exact duration within which an item gets deleted after expiration is specific to the nature of the workload. Items that have expired and not been deleted will still show up in reads, queries, and scans.
    
    As items are deleted, they are removed from any local secondary index and global secondary index immediately in the same eventually consistent way as a standard delete operation.
    
    For more information, see Time To Live in the Amazon DynamoDB Developer Guide.
    
    Specified by:
    
    updateTimeToLiveAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of an UpdateTimeToLive operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateTimeToLive operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateTimeToLiveAsync
```
public Future<UpdateTimeToLiveResult> updateTimeToLiveAsync(UpdateTimeToLiveRequest request,
                                                            AsyncHandler<UpdateTimeToLiveRequest,UpdateTimeToLiveResult> asyncHandler)
```
    Description copied from interface: AmazonDynamoDBAsync
    
    The UpdateTimeToLive method enables or disables Time to Live (TTL) for the specified table. A successful UpdateTimeToLive call returns the current TimeToLiveSpecification. It can take up to one hour for the change to fully process. Any additional UpdateTimeToLive calls for the same table during this one hour duration result in a ValidationException.
    
    TTL compares the current time in epoch time format to the time stored in the TTL attribute of an item. If the epoch time value stored in the attribute is less than the current time, the item is marked as expired and subsequently deleted.
    
    The epoch time format is the number of seconds elapsed since 12:00:00 AM January 1, 1970 UTC.
    
    DynamoDB deletes expired items on a best-effort basis to ensure availability of throughput for other data operations.
    
    DynamoDB typically deletes expired items within two days of expiration. The exact duration within which an item gets deleted after expiration is specific to the nature of the workload. Items that have expired and not been deleted will still show up in reads, queries, and scans.
    
    As items are deleted, they are removed from any local secondary index and global secondary index immediately in the same eventually consistent way as a standard delete operation.
    
    For more information, see Time To Live in the Amazon DynamoDB Developer Guide.
    
    Specified by:
    
    updateTimeToLiveAsync in interface AmazonDynamoDBAsync
    
    Parameters:
    
    request - Represents the input of an UpdateTimeToLive operation.
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the UpdateTimeToLive operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - shutdown
```
public void shutdown()
```
    Shuts down the client, releasing all managed resources. This includes forcibly terminating all pending asynchronous service calls. Clients who wish to give pending asynchronous service calls time to complete should call getExecutorService().shutdown() followed by getExecutorService().awaitTermination() prior to calling this method.
    
    Specified by:
    
    shutdown in interface AmazonDynamoDB
    
    Overrides:
    
    shutdown in class AmazonDynamoDBClient

Class AmazonDynamoDBAsyncClient

Field Summary

Fields inherited from class com.amazonaws.services.dynamodbv2.AmazonDynamoDBClient

Fields inherited from class com.amazonaws.AmazonWebServiceClient

Fields inherited from interface com.amazonaws.services.dynamodbv2.AmazonDynamoDB

Constructor Summary

Method Summary

Methods inherited from class com.amazonaws.services.dynamodbv2.AmazonDynamoDBClient

Methods inherited from class com.amazonaws.AmazonWebServiceClient

Methods inherited from class java.lang.Object

Methods inherited from interface com.amazonaws.services.dynamodbv2.AmazonDynamoDB

Constructor Detail

AmazonDynamoDBAsyncClient

AmazonDynamoDBAsyncClient

AmazonDynamoDBAsyncClient

AmazonDynamoDBAsyncClient

AmazonDynamoDBAsyncClient

AmazonDynamoDBAsyncClient

AmazonDynamoDBAsyncClient

AmazonDynamoDBAsyncClient

AmazonDynamoDBAsyncClient

Method Detail

asyncBuilder

getExecutorService

batchExecuteStatementAsync

batchExecuteStatementAsync

batchGetItemAsync

batchGetItemAsync

batchGetItemAsync

batchGetItemAsync

batchGetItemAsync

batchGetItemAsync

batchWriteItemAsync

batchWriteItemAsync

batchWriteItemAsync

batchWriteItemAsync

createBackupAsync

createBackupAsync

createGlobalTableAsync

createGlobalTableAsync

createTableAsync

createTableAsync

createTableAsync

createTableAsync

deleteBackupAsync

deleteBackupAsync

deleteItemAsync

deleteItemAsync

deleteItemAsync

deleteItemAsync

deleteItemAsync

deleteItemAsync

deleteTableAsync

deleteTableAsync

deleteTableAsync

deleteTableAsync

describeBackupAsync

describeBackupAsync

describeContinuousBackupsAsync

describeContinuousBackupsAsync

describeContributorInsightsAsync

describeContributorInsightsAsync

describeEndpointsAsync

describeEndpointsAsync

describeExportAsync

describeExportAsync

describeGlobalTableAsync

describeGlobalTableAsync

describeGlobalTableSettingsAsync

describeGlobalTableSettingsAsync

describeKinesisStreamingDestinationAsync

describeKinesisStreamingDestinationAsync

describeLimitsAsync

describeLimitsAsync

describeTableAsync

describeTableAsync

describeTableAsync

describeTableAsync

describeTableReplicaAutoScalingAsync

describeTableReplicaAutoScalingAsync