@Generated(value="com.amazonaws:aws-java-sdk-code-generator") public class AbstractAmazonKinesisVideoArchivedMediaAsync extends AbstractAmazonKinesisVideoArchivedMedia implements AmazonKinesisVideoArchivedMediaAsync
AmazonKinesisVideoArchivedMediaAsync. Convenient method forms pass through to the
corresponding overload that takes a request object and an AsyncHandler, which throws an
UnsupportedOperationException.ENDPOINT_PREFIX| Modifier | Constructor and Description |
|---|---|
protected |
AbstractAmazonKinesisVideoArchivedMediaAsync() |
getCachedResponseMetadata, getDASHStreamingSessionURL, getHLSStreamingSessionURL, getMediaForFragmentList, listFragments, shutdownclone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitgetCachedResponseMetadata, getDASHStreamingSessionURL, getHLSStreamingSessionURL, getMediaForFragmentList, listFragments, shutdownprotected AbstractAmazonKinesisVideoArchivedMediaAsync()
public Future<GetDASHStreamingSessionURLResult> getDASHStreamingSessionURLAsync(GetDASHStreamingSessionURLRequest request)
AmazonKinesisVideoArchivedMediaAsyncRetrieves an MPEG Dynamic Adaptive Streaming over HTTP (DASH) URL for the stream. You can then open the URL in a media player to view the stream contents.
Both the StreamName and the StreamARN parameters are optional, but you must specify
either the StreamName or the StreamARN when invoking this API operation.
An Amazon Kinesis video stream has the following requirements for providing data through MPEG-DASH:
The media must contain h.264 or h.265 encoded video and, optionally, AAC or G.711 encoded audio. Specifically,
the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEGH/ISO/HEVC (for H.265).
Optionally, the codec ID of track 2 should be A_AAC (for AAC) or A_MS/ACM (for G.711).
Data retention must be greater than 0.
The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format and HEVC for H.265 format. For more information, see MPEG-4 specification ISO/IEC 14496-15. For information about adapting stream data to a given format, see NAL Adaptation Flags.
The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7) or the MS Wave format.
The following procedure shows how to use MPEG-DASH with Kinesis Video Streams:
Get an endpoint using GetDataEndpoint,
specifying GET_DASH_STREAMING_SESSION_URL for the APIName parameter.
Retrieve the MPEG-DASH URL using GetDASHStreamingSessionURL. Kinesis Video Streams creates an
MPEG-DASH streaming session to be used for accessing content in a stream using the MPEG-DASH protocol.
GetDASHStreamingSessionURL returns an authenticated URL (that includes an encrypted session token)
for the session's MPEG-DASH manifest (the root resource needed for streaming with MPEG-DASH).
Don't share or store this token where an unauthorized entity could access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you would use with your AWS credentials.
The media that is made available through the manifest consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.
Provide the URL (containing the encrypted session token) for the MPEG-DASH manifest to a media player that supports the MPEG-DASH protocol. Kinesis Video Streams makes the initialization fragment and media fragments available through the manifest URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain encoded video frames or encoded audio samples.
The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:
GetDASHManifest: Retrieves an MPEG DASH manifest, which contains the metadata for the media that you want to playback.
GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the
initialization fragment before loading any media fragments. This fragment contains the "fytp" and "
moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder.
The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.
GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "
mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their
timestamps.
After the first media fragment is made available in a streaming session, any fragments that don't contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.
Data retrieved with this action is billable. See Pricing for details.
The following restrictions apply to MPEG-DASH sessions:
A streaming session URL should not be shared between players. The service might throttle a session if multiple media players are sharing it. For connection limits, see Kinesis Video Streams Limits.
A Kinesis video stream can have a maximum of ten active MPEG-DASH streaming sessions. If a new session is created
when the maximum number of sessions is already active, the oldest (earliest created) session is closed. The
number of active GetMedia connections on a Kinesis video stream does not count against this limit,
and the number of active MPEG-DASH sessions does not count against the active GetMedia connection
limit.
The maximum limits for active HLS and MPEG-DASH streaming sessions are independent of each other.
You can monitor the amount of data that the media player consumes by monitoring the
GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch
to monitor Kinesis Video Streams, see Monitoring Kinesis Video
Streams. For pricing information, see Amazon
Kinesis Video Streams Pricing and AWS Pricing. Charges for both
HLS sessions and outgoing AWS data apply.
For more information about HLS, see HTTP Live Streaming on the Apple Developer site.
If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:
x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP
status code provides.
x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better
diagnose the problem if given the Request Id.
Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again.
For more information, see the Errors section at the bottom of this topic, as well as Common Errors.
getDASHStreamingSessionURLAsync in interface AmazonKinesisVideoArchivedMediaAsyncpublic Future<GetDASHStreamingSessionURLResult> getDASHStreamingSessionURLAsync(GetDASHStreamingSessionURLRequest request, AsyncHandler<GetDASHStreamingSessionURLRequest,GetDASHStreamingSessionURLResult> asyncHandler)
AmazonKinesisVideoArchivedMediaAsyncRetrieves an MPEG Dynamic Adaptive Streaming over HTTP (DASH) URL for the stream. You can then open the URL in a media player to view the stream contents.
Both the StreamName and the StreamARN parameters are optional, but you must specify
either the StreamName or the StreamARN when invoking this API operation.
An Amazon Kinesis video stream has the following requirements for providing data through MPEG-DASH:
The media must contain h.264 or h.265 encoded video and, optionally, AAC or G.711 encoded audio. Specifically,
the codec ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEGH/ISO/HEVC (for H.265).
Optionally, the codec ID of track 2 should be A_AAC (for AAC) or A_MS/ACM (for G.711).
Data retention must be greater than 0.
The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format and HEVC for H.265 format. For more information, see MPEG-4 specification ISO/IEC 14496-15. For information about adapting stream data to a given format, see NAL Adaptation Flags.
The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7) or the MS Wave format.
The following procedure shows how to use MPEG-DASH with Kinesis Video Streams:
Get an endpoint using GetDataEndpoint,
specifying GET_DASH_STREAMING_SESSION_URL for the APIName parameter.
Retrieve the MPEG-DASH URL using GetDASHStreamingSessionURL. Kinesis Video Streams creates an
MPEG-DASH streaming session to be used for accessing content in a stream using the MPEG-DASH protocol.
GetDASHStreamingSessionURL returns an authenticated URL (that includes an encrypted session token)
for the session's MPEG-DASH manifest (the root resource needed for streaming with MPEG-DASH).
Don't share or store this token where an unauthorized entity could access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you would use with your AWS credentials.
The media that is made available through the manifest consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.
Provide the URL (containing the encrypted session token) for the MPEG-DASH manifest to a media player that supports the MPEG-DASH protocol. Kinesis Video Streams makes the initialization fragment and media fragments available through the manifest URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain encoded video frames or encoded audio samples.
The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:
GetDASHManifest: Retrieves an MPEG DASH manifest, which contains the metadata for the media that you want to playback.
GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the
initialization fragment before loading any media fragments. This fragment contains the "fytp" and "
moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder.
The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.
GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "
mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their
timestamps.
After the first media fragment is made available in a streaming session, any fragments that don't contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.
Data retrieved with this action is billable. See Pricing for details.
The following restrictions apply to MPEG-DASH sessions:
A streaming session URL should not be shared between players. The service might throttle a session if multiple media players are sharing it. For connection limits, see Kinesis Video Streams Limits.
A Kinesis video stream can have a maximum of ten active MPEG-DASH streaming sessions. If a new session is created
when the maximum number of sessions is already active, the oldest (earliest created) session is closed. The
number of active GetMedia connections on a Kinesis video stream does not count against this limit,
and the number of active MPEG-DASH sessions does not count against the active GetMedia connection
limit.
The maximum limits for active HLS and MPEG-DASH streaming sessions are independent of each other.
You can monitor the amount of data that the media player consumes by monitoring the
GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch
to monitor Kinesis Video Streams, see Monitoring Kinesis Video
Streams. For pricing information, see Amazon
Kinesis Video Streams Pricing and AWS Pricing. Charges for both
HLS sessions and outgoing AWS data apply.
For more information about HLS, see HTTP Live Streaming on the Apple Developer site.
If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:
x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP
status code provides.
x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better
diagnose the problem if given the Request Id.
Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again.
For more information, see the Errors section at the bottom of this topic, as well as Common Errors.
getDASHStreamingSessionURLAsync in interface AmazonKinesisVideoArchivedMediaAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<GetHLSStreamingSessionURLResult> getHLSStreamingSessionURLAsync(GetHLSStreamingSessionURLRequest request)
AmazonKinesisVideoArchivedMediaAsyncRetrieves an HTTP Live Streaming (HLS) URL for the stream. You can then open the URL in a browser or media player to view the stream contents.
Both the StreamName and the StreamARN parameters are optional, but you must specify
either the StreamName or the StreamARN when invoking this API operation.
An Amazon Kinesis video stream has the following requirements for providing data through HLS:
The media must contain h.264 or h.265 encoded video and, optionally, AAC encoded audio. Specifically, the codec
ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEG/ISO/HEVC (for h.265).
Optionally, the codec ID of track 2 should be A_AAC.
Data retention must be greater than 0.
The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format or HEVC for H.265 format (MPEG-4 specification ISO/IEC 14496-15). For information about adapting stream data to a given format, see NAL Adaptation Flags.
The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7).
Kinesis Video Streams HLS sessions contain fragments in the fragmented MPEG-4 form (also called fMP4 or CMAF) or the MPEG-2 form (also called TS chunks, which the HLS specification also supports). For more information about HLS fragment types, see the HLS specification.
The following procedure shows how to use HLS with Kinesis Video Streams:
Get an endpoint using GetDataEndpoint,
specifying GET_HLS_STREAMING_SESSION_URL for the APIName parameter.
Retrieve the HLS URL using GetHLSStreamingSessionURL. Kinesis Video Streams creates an HLS streaming
session to be used for accessing content in a stream using the HLS protocol.
GetHLSStreamingSessionURL returns an authenticated URL (that includes an encrypted session token)
for the session's HLS master playlist (the root resource needed for streaming with HLS).
Don't share or store this token where an unauthorized entity could access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you would use with your AWS credentials.
The media that is made available through the playlist consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.
Provide the URL (containing the encrypted session token) for the HLS master playlist to a media player that supports the HLS protocol. Kinesis Video Streams makes the HLS media playlist, initialization fragment, and media fragments available through the master playlist URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain H.264-encoded video frames or AAC-encoded audio samples.
The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:
GetHLSMasterPlaylist: Retrieves an HLS master playlist, which contains a URL for the
GetHLSMediaPlaylist action for each track, and additional metadata for the media player, including
estimated bitrate and resolution.
GetHLSMediaPlaylist: Retrieves an HLS media playlist, which contains a URL to access the MP4
initialization fragment with the GetMP4InitFragment action, and URLs to access the MP4 media
fragments with the GetMP4MediaFragment actions. The HLS media playlist also contains metadata about
the stream that the player needs to play it, such as whether the PlaybackMode is LIVE
or ON_DEMAND. The HLS media playlist is typically static for sessions with a
PlaybackType of ON_DEMAND. The HLS media playlist is continually updated with new
fragments for sessions with a PlaybackType of LIVE. There is a distinct HLS media
playlist for the video track and the audio track (if applicable) that contains MP4 media URLs for the specific
track.
GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the
initialization fragment before loading any media fragments. This fragment contains the "fytp" and "
moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder.
The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.
GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "
mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their
timestamps.
After the first media fragment is made available in a streaming session, any fragments that don't contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.
Data retrieved with this action is billable. See Pricing for details.
GetTSFragment: Retrieves MPEG TS fragments containing both initialization and media data for all tracks in the stream.
If the ContainerFormat is MPEG_TS, this API is used instead of
GetMP4InitFragment and GetMP4MediaFragment to retrieve stream media.
Data retrieved with this action is billable. For more information, see Kinesis Video Streams pricing.
The following restrictions apply to HLS sessions:
A streaming session URL should not be shared between players. The service might throttle a session if multiple media players are sharing it. For connection limits, see Kinesis Video Streams Limits.
A Kinesis video stream can have a maximum of ten active HLS streaming sessions. If a new session is created when
the maximum number of sessions is already active, the oldest (earliest created) session is closed. The number of
active GetMedia connections on a Kinesis video stream does not count against this limit, and the
number of active HLS sessions does not count against the active GetMedia connection limit.
The maximum limits for active HLS and MPEG-DASH streaming sessions are independent of each other.
You can monitor the amount of data that the media player consumes by monitoring the
GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch
to monitor Kinesis Video Streams, see Monitoring Kinesis Video
Streams. For pricing information, see Amazon
Kinesis Video Streams Pricing and AWS Pricing. Charges for both
HLS sessions and outgoing AWS data apply.
For more information about HLS, see HTTP Live Streaming on the Apple Developer site.
If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:
x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP
status code provides.
x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better
diagnose the problem if given the Request Id.
Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again.
For more information, see the Errors section at the bottom of this topic, as well as Common Errors.
getHLSStreamingSessionURLAsync in interface AmazonKinesisVideoArchivedMediaAsyncpublic Future<GetHLSStreamingSessionURLResult> getHLSStreamingSessionURLAsync(GetHLSStreamingSessionURLRequest request, AsyncHandler<GetHLSStreamingSessionURLRequest,GetHLSStreamingSessionURLResult> asyncHandler)
AmazonKinesisVideoArchivedMediaAsyncRetrieves an HTTP Live Streaming (HLS) URL for the stream. You can then open the URL in a browser or media player to view the stream contents.
Both the StreamName and the StreamARN parameters are optional, but you must specify
either the StreamName or the StreamARN when invoking this API operation.
An Amazon Kinesis video stream has the following requirements for providing data through HLS:
The media must contain h.264 or h.265 encoded video and, optionally, AAC encoded audio. Specifically, the codec
ID of track 1 should be V_MPEG/ISO/AVC (for h.264) or V_MPEG/ISO/HEVC (for h.265).
Optionally, the codec ID of track 2 should be A_AAC.
Data retention must be greater than 0.
The video track of each fragment must contain codec private data in the Advanced Video Coding (AVC) for H.264 format or HEVC for H.265 format (MPEG-4 specification ISO/IEC 14496-15). For information about adapting stream data to a given format, see NAL Adaptation Flags.
The audio track (if present) of each fragment must contain codec private data in the AAC format (AAC specification ISO/IEC 13818-7).
Kinesis Video Streams HLS sessions contain fragments in the fragmented MPEG-4 form (also called fMP4 or CMAF) or the MPEG-2 form (also called TS chunks, which the HLS specification also supports). For more information about HLS fragment types, see the HLS specification.
The following procedure shows how to use HLS with Kinesis Video Streams:
Get an endpoint using GetDataEndpoint,
specifying GET_HLS_STREAMING_SESSION_URL for the APIName parameter.
Retrieve the HLS URL using GetHLSStreamingSessionURL. Kinesis Video Streams creates an HLS streaming
session to be used for accessing content in a stream using the HLS protocol.
GetHLSStreamingSessionURL returns an authenticated URL (that includes an encrypted session token)
for the session's HLS master playlist (the root resource needed for streaming with HLS).
Don't share or store this token where an unauthorized entity could access it. The token provides access to the content of the stream. Safeguard the token with the same measures that you would use with your AWS credentials.
The media that is made available through the playlist consists only of the requested stream, time range, and format. No other media data (such as frames outside the requested window or alternate bitrates) is made available.
Provide the URL (containing the encrypted session token) for the HLS master playlist to a media player that supports the HLS protocol. Kinesis Video Streams makes the HLS media playlist, initialization fragment, and media fragments available through the master playlist URL. The initialization fragment contains the codec private data for the stream, and other data needed to set up the video or audio decoder and renderer. The media fragments contain H.264-encoded video frames or AAC-encoded audio samples.
The media player receives the authenticated URL and requests stream metadata and media data normally. When the media player requests data, it calls the following actions:
GetHLSMasterPlaylist: Retrieves an HLS master playlist, which contains a URL for the
GetHLSMediaPlaylist action for each track, and additional metadata for the media player, including
estimated bitrate and resolution.
GetHLSMediaPlaylist: Retrieves an HLS media playlist, which contains a URL to access the MP4
initialization fragment with the GetMP4InitFragment action, and URLs to access the MP4 media
fragments with the GetMP4MediaFragment actions. The HLS media playlist also contains metadata about
the stream that the player needs to play it, such as whether the PlaybackMode is LIVE
or ON_DEMAND. The HLS media playlist is typically static for sessions with a
PlaybackType of ON_DEMAND. The HLS media playlist is continually updated with new
fragments for sessions with a PlaybackType of LIVE. There is a distinct HLS media
playlist for the video track and the audio track (if applicable) that contains MP4 media URLs for the specific
track.
GetMP4InitFragment: Retrieves the MP4 initialization fragment. The media player typically loads the
initialization fragment before loading any media fragments. This fragment contains the "fytp" and "
moov" MP4 atoms, and the child atoms that are needed to initialize the media player decoder.
The initialization fragment does not correspond to a fragment in a Kinesis video stream. It contains only the codec private data for the stream and respective track, which the media player needs to decode the media frames.
GetMP4MediaFragment: Retrieves MP4 media fragments. These fragments contain the "moof" and "
mdat" MP4 atoms and their child atoms, containing the encoded fragment's media frames and their
timestamps.
After the first media fragment is made available in a streaming session, any fragments that don't contain the same codec private data cause an error to be returned when those different media fragments are loaded. Therefore, the codec private data should not change between fragments in a session. This also means that the session fails if the fragments in a stream change from having only video to having both audio and video.
Data retrieved with this action is billable. See Pricing for details.
GetTSFragment: Retrieves MPEG TS fragments containing both initialization and media data for all tracks in the stream.
If the ContainerFormat is MPEG_TS, this API is used instead of
GetMP4InitFragment and GetMP4MediaFragment to retrieve stream media.
Data retrieved with this action is billable. For more information, see Kinesis Video Streams pricing.
The following restrictions apply to HLS sessions:
A streaming session URL should not be shared between players. The service might throttle a session if multiple media players are sharing it. For connection limits, see Kinesis Video Streams Limits.
A Kinesis video stream can have a maximum of ten active HLS streaming sessions. If a new session is created when
the maximum number of sessions is already active, the oldest (earliest created) session is closed. The number of
active GetMedia connections on a Kinesis video stream does not count against this limit, and the
number of active HLS sessions does not count against the active GetMedia connection limit.
The maximum limits for active HLS and MPEG-DASH streaming sessions are independent of each other.
You can monitor the amount of data that the media player consumes by monitoring the
GetMP4MediaFragment.OutgoingBytes Amazon CloudWatch metric. For information about using CloudWatch
to monitor Kinesis Video Streams, see Monitoring Kinesis Video
Streams. For pricing information, see Amazon
Kinesis Video Streams Pricing and AWS Pricing. Charges for both
HLS sessions and outgoing AWS data apply.
For more information about HLS, see HTTP Live Streaming on the Apple Developer site.
If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:
x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP
status code provides.
x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better
diagnose the problem if given the Request Id.
Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again.
For more information, see the Errors section at the bottom of this topic, as well as Common Errors.
getHLSStreamingSessionURLAsync in interface AmazonKinesisVideoArchivedMediaAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<GetMediaForFragmentListResult> getMediaForFragmentListAsync(GetMediaForFragmentListRequest request)
AmazonKinesisVideoArchivedMediaAsyncGets media for a list of fragments (specified by fragment number) from the archived data in an Amazon Kinesis video stream.
You must first call the GetDataEndpoint API to get an endpoint. Then send the
GetMediaForFragmentList requests to this endpoint using the --endpoint-url parameter.
The following limits apply when using the GetMediaForFragmentList API:
A client can call GetMediaForFragmentList up to five times per second per stream.
Kinesis Video Streams sends media data at a rate of up to 25 megabytes per second (or 200 megabits per second)
during a GetMediaForFragmentList session.
If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:
x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP
status code provides.
x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better
diagnose the problem if given the Request Id.
Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again.
For more information, see the Errors section at the bottom of this topic, as well as Common Errors.
getMediaForFragmentListAsync in interface AmazonKinesisVideoArchivedMediaAsyncpublic Future<GetMediaForFragmentListResult> getMediaForFragmentListAsync(GetMediaForFragmentListRequest request, AsyncHandler<GetMediaForFragmentListRequest,GetMediaForFragmentListResult> asyncHandler)
AmazonKinesisVideoArchivedMediaAsyncGets media for a list of fragments (specified by fragment number) from the archived data in an Amazon Kinesis video stream.
You must first call the GetDataEndpoint API to get an endpoint. Then send the
GetMediaForFragmentList requests to this endpoint using the --endpoint-url parameter.
The following limits apply when using the GetMediaForFragmentList API:
A client can call GetMediaForFragmentList up to five times per second per stream.
Kinesis Video Streams sends media data at a rate of up to 25 megabytes per second (or 200 megabits per second)
during a GetMediaForFragmentList session.
If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:
x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP
status code provides.
x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better
diagnose the problem if given the Request Id.
Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again.
For more information, see the Errors section at the bottom of this topic, as well as Common Errors.
getMediaForFragmentListAsync in interface AmazonKinesisVideoArchivedMediaAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ListFragmentsResult> listFragmentsAsync(ListFragmentsRequest request)
AmazonKinesisVideoArchivedMediaAsyncReturns a list of Fragment objects from the specified stream and timestamp range within the archived data.
Listing fragments is eventually consistent. This means that even if the producer receives an acknowledgment that
a fragment is persisted, the result might not be returned immediately from a request to
ListFragments. However, results are typically available in less than one second.
You must first call the GetDataEndpoint API to get an endpoint. Then send the
ListFragments requests to this endpoint using the --endpoint-url parameter.
If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:
x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP
status code provides.
x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better
diagnose the problem if given the Request Id.
Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again.
For more information, see the Errors section at the bottom of this topic, as well as Common Errors.
listFragmentsAsync in interface AmazonKinesisVideoArchivedMediaAsyncpublic Future<ListFragmentsResult> listFragmentsAsync(ListFragmentsRequest request, AsyncHandler<ListFragmentsRequest,ListFragmentsResult> asyncHandler)
AmazonKinesisVideoArchivedMediaAsyncReturns a list of Fragment objects from the specified stream and timestamp range within the archived data.
Listing fragments is eventually consistent. This means that even if the producer receives an acknowledgment that
a fragment is persisted, the result might not be returned immediately from a request to
ListFragments. However, results are typically available in less than one second.
You must first call the GetDataEndpoint API to get an endpoint. Then send the
ListFragments requests to this endpoint using the --endpoint-url parameter.
If an error is thrown after invoking a Kinesis Video Streams archived media API, in addition to the HTTP status code and the response body, it includes the following pieces of information:
x-amz-ErrorType HTTP header – contains a more specific error type in addition to what the HTTP
status code provides.
x-amz-RequestId HTTP header – if you want to report an issue to AWS, the support team can better
diagnose the problem if given the Request Id.
Both the HTTP status code and the ErrorType header can be utilized to make programmatic decisions about whether errors are retry-able and under what conditions, as well as provide information on what actions the client programmer might need to take in order to successfully try again.
For more information, see the Errors section at the bottom of this topic, as well as Common Errors.
listFragmentsAsync in interface AmazonKinesisVideoArchivedMediaAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Copyright © 2020. All rights reserved.