ResourceRecordSet (AWS SDK for Java

java.lang.Object
- com.amazonaws.services.route53.model.ResourceRecordSet

All Implemented Interfaces:

Serializable, Cloneable
```
public class ResourceRecordSet
extends Object
implements Serializable, Cloneable
```
A complex type that contains information about the current resource record set.

See Also:

Serialized Form

Constructor Summary

Constructors
Constructor and Description
`ResourceRecordSet()` Default constructor for ResourceRecordSet object.
`ResourceRecordSet(String name, RRType type)` Constructs a new ResourceRecordSet object.
`ResourceRecordSet(String name, String type)` Constructs a new ResourceRecordSet object.

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`ResourceRecordSet`	`clone()`
`boolean`	`equals(Object obj)`
`AliasTarget`	`getAliasTarget()` Alias resource record sets only: Information about the AWS resource to which you are redirecting traffic.
`String`	`getFailover()` Failover resource record sets only: To configure failover, you add the `Failover` element to two resource record sets.
`GeoLocation`	`getGeoLocation()` Geo location resource record sets only: A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query.
`String`	`getHealthCheckId()` Health Check resource record sets only, not required for alias resource record sets: An identifier that is used to identify health check associated with the resource record set.
`String`	`getName()` The name of the domain you want to perform the action on.
`String`	`getRegion()` Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides.
`List<ResourceRecord>`	`getResourceRecords()` A complex type that contains the resource records for the current resource record set.
`String`	`getSetIdentifier()` Weighted, Latency, Geo, and Failover resource record sets only: An identifier that differentiates among multiple resource record sets that have the same combination of DNS name and type.
`String`	`getTrafficPolicyInstanceId()`
`Long`	`getTTL()` The cache time to live for the current resource record set.
`String`	`getType()` The DNS record type.
`Long`	`getWeight()` Weighted resource record sets only: Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set.
`int`	`hashCode()`
`void`	`setAliasTarget(AliasTarget aliasTarget)` Alias resource record sets only: Information about the AWS resource to which you are redirecting traffic.
`void`	`setFailover(ResourceRecordSetFailover failover)` Failover resource record sets only: To configure failover, you add the `Failover` element to two resource record sets.
`void`	`setFailover(String failover)` Failover resource record sets only: To configure failover, you add the `Failover` element to two resource record sets.
`void`	`setGeoLocation(GeoLocation geoLocation)` Geo location resource record sets only: A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query.
`void`	`setHealthCheckId(String healthCheckId)` Health Check resource record sets only, not required for alias resource record sets: An identifier that is used to identify health check associated with the resource record set.
`void`	`setName(String name)` The name of the domain you want to perform the action on.
`void`	`setRegion(ResourceRecordSetRegion region)` Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides.
`void`	`setRegion(String region)` Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides.
`void`	`setResourceRecords(Collection<ResourceRecord> resourceRecords)` A complex type that contains the resource records for the current resource record set.
`void`	`setSetIdentifier(String setIdentifier)` Weighted, Latency, Geo, and Failover resource record sets only: An identifier that differentiates among multiple resource record sets that have the same combination of DNS name and type.
`void`	`setTrafficPolicyInstanceId(String trafficPolicyInstanceId)`
`void`	`setTTL(Long tTL)` The cache time to live for the current resource record set.
`void`	`setType(RRType type)` The DNS record type.
`void`	`setType(String type)` The DNS record type.
`void`	`setWeight(Long weight)` Weighted resource record sets only: Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set.
`String`	`toString()` Returns a string representation of this object; useful for testing and debugging.
`ResourceRecordSet`	`withAliasTarget(AliasTarget aliasTarget)` Alias resource record sets only: Information about the AWS resource to which you are redirecting traffic.
`ResourceRecordSet`	`withFailover(ResourceRecordSetFailover failover)` Failover resource record sets only: To configure failover, you add the `Failover` element to two resource record sets.
`ResourceRecordSet`	`withFailover(String failover)` Failover resource record sets only: To configure failover, you add the `Failover` element to two resource record sets.
`ResourceRecordSet`	`withGeoLocation(GeoLocation geoLocation)` Geo location resource record sets only: A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query.
`ResourceRecordSet`	`withHealthCheckId(String healthCheckId)` Health Check resource record sets only, not required for alias resource record sets: An identifier that is used to identify health check associated with the resource record set.
`ResourceRecordSet`	`withName(String name)` The name of the domain you want to perform the action on.
`ResourceRecordSet`	`withRegion(ResourceRecordSetRegion region)` Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides.
`ResourceRecordSet`	`withRegion(String region)` Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides.
`ResourceRecordSet`	`withResourceRecords(Collection<ResourceRecord> resourceRecords)` A complex type that contains the resource records for the current resource record set.
`ResourceRecordSet`	`withResourceRecords(ResourceRecord... resourceRecords)` A complex type that contains the resource records for the current resource record set.
`ResourceRecordSet`	`withSetIdentifier(String setIdentifier)` Weighted, Latency, Geo, and Failover resource record sets only: An identifier that differentiates among multiple resource record sets that have the same combination of DNS name and type.
`ResourceRecordSet`	`withTrafficPolicyInstanceId(String trafficPolicyInstanceId)`
`ResourceRecordSet`	`withTTL(Long tTL)` The cache time to live for the current resource record set.
`ResourceRecordSet`	`withType(RRType type)` The DNS record type.
`ResourceRecordSet`	`withType(String type)` The DNS record type.
`ResourceRecordSet`	`withWeight(Long weight)` Weighted resource record sets only: Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set.

Methods inherited from class java.lang.Object
getClass, notify, notifyAll, wait, wait, wait

- Constructor Detail
  - ResourceRecordSet
```
public ResourceRecordSet()
```
    Default constructor for ResourceRecordSet object. Callers should use the setter or fluent setter (with...) methods to initialize the object after creating it.
  - ResourceRecordSet
```
public ResourceRecordSet(String name,
                         String type)
```
    Constructs a new ResourceRecordSet object. Callers should use the setter or fluent setter (with...) methods to initialize any additional object members.
    Parameters:
    
    name - The name of the domain you want to perform the action on.
    
    Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 still assumes that the domain name that you specify is fully qualified. This means that Amazon Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical.
    
    For information about how to specify characters other than a-z, 0-9, and - (hyphen) and how to specify internationalized domain names, see DNS Domain Name Format in the Amazon Route 53 Developer Guide.
    
    You can use an asterisk (*) character in the name. DNS treats the * character either as a wildcard or as the * character (ASCII 42), depending on where it appears in the name. For more information, see Using an Asterisk (*) in the Names of Hosted Zones and Resource Record Sets in the Amazon Route 53 Developer Guide
    You can't use the * wildcard for resource records sets that have a type of NS.
    type - The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    
    CloudFront distributions: A
    
    ELB load balancers: A | AAAA
    
    Amazon S3 buckets: A
    
    Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
  - ResourceRecordSet
```
public ResourceRecordSet(String name,
                         RRType type)
```
    Constructs a new ResourceRecordSet object. Callers should use the setter or fluent setter (with...) methods to initialize any additional object members.
    Parameters:
    
    name - The name of the domain you want to perform the action on.
    
    Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 still assumes that the domain name that you specify is fully qualified. This means that Amazon Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical.
    
    For information about how to specify characters other than a-z, 0-9, and - (hyphen) and how to specify internationalized domain names, see DNS Domain Name Format in the Amazon Route 53 Developer Guide.
    
    You can use an asterisk (*) character in the name. DNS treats the * character either as a wildcard or as the * character (ASCII 42), depending on where it appears in the name. For more information, see Using an Asterisk (*) in the Names of Hosted Zones and Resource Record Sets in the Amazon Route 53 Developer Guide
    You can't use the * wildcard for resource records sets that have a type of NS.
    type - The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    
    CloudFront distributions: A
    
    ELB load balancers: A | AAAA
    
    Amazon S3 buckets: A
    
    Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
- Method Detail
  - setName
```
public void setName(String name)
```
    The name of the domain you want to perform the action on.
    
    Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 still assumes that the domain name that you specify is fully qualified. This means that Amazon Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical.
    
    For information about how to specify characters other than a-z, 0-9, and - (hyphen) and how to specify internationalized domain names, see DNS Domain Name Format in the Amazon Route 53 Developer Guide.
    
    You can use an asterisk (*) character in the name. DNS treats the * character either as a wildcard or as the * character (ASCII 42), depending on where it appears in the name. For more information, see Using an Asterisk (*) in the Names of Hosted Zones and Resource Record Sets in the Amazon Route 53 Developer Guide
    You can't use the * wildcard for resource records sets that have a type of NS.
    
    Parameters:
    
    name - The name of the domain you want to perform the action on.
    
    Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 still assumes that the domain name that you specify is fully qualified. This means that Amazon Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical.
    
    For information about how to specify characters other than a-z, 0-9, and - (hyphen) and how to specify internationalized domain names, see DNS Domain Name Format in the Amazon Route 53 Developer Guide.
    
    You can use an asterisk (*) character in the name. DNS treats the * character either as a wildcard or as the * character (ASCII 42), depending on where it appears in the name. For more information, see Using an Asterisk (*) in the Names of Hosted Zones and Resource Record Sets in the Amazon Route 53 Developer Guide
    You can't use the * wildcard for resource records sets that have a type of NS.
  - getName
```
public String getName()
```
    The name of the domain you want to perform the action on.
    
    Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 still assumes that the domain name that you specify is fully qualified. This means that Amazon Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical.
    
    For information about how to specify characters other than a-z, 0-9, and - (hyphen) and how to specify internationalized domain names, see DNS Domain Name Format in the Amazon Route 53 Developer Guide.
    
    You can use an asterisk (*) character in the name. DNS treats the * character either as a wildcard or as the * character (ASCII 42), depending on where it appears in the name. For more information, see Using an Asterisk (*) in the Names of Hosted Zones and Resource Record Sets in the Amazon Route 53 Developer Guide
    You can't use the * wildcard for resource records sets that have a type of NS.
    
    Returns:
    
    The name of the domain you want to perform the action on.
    
    Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 still assumes that the domain name that you specify is fully qualified. This means that Amazon Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical.
    
    For information about how to specify characters other than a-z, 0-9, and - (hyphen) and how to specify internationalized domain names, see DNS Domain Name Format in the Amazon Route 53 Developer Guide.
    
    You can use an asterisk (*) character in the name. DNS treats the * character either as a wildcard or as the * character (ASCII 42), depending on where it appears in the name. For more information, see Using an Asterisk (*) in the Names of Hosted Zones and Resource Record Sets in the Amazon Route 53 Developer Guide
    You can't use the * wildcard for resource records sets that have a type of NS.
  - withName
```
public ResourceRecordSet withName(String name)
```
    The name of the domain you want to perform the action on.
    
    Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 still assumes that the domain name that you specify is fully qualified. This means that Amazon Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical.
    
    For information about how to specify characters other than a-z, 0-9, and - (hyphen) and how to specify internationalized domain names, see DNS Domain Name Format in the Amazon Route 53 Developer Guide.
    
    You can use an asterisk (*) character in the name. DNS treats the * character either as a wildcard or as the * character (ASCII 42), depending on where it appears in the name. For more information, see Using an Asterisk (*) in the Names of Hosted Zones and Resource Record Sets in the Amazon Route 53 Developer Guide
    You can't use the * wildcard for resource records sets that have a type of NS.
    
    Parameters:
    
    name - The name of the domain you want to perform the action on.
    
    Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 still assumes that the domain name that you specify is fully qualified. This means that Amazon Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical.
    
    For information about how to specify characters other than a-z, 0-9, and - (hyphen) and how to specify internationalized domain names, see DNS Domain Name Format in the Amazon Route 53 Developer Guide.
    
    You can use an asterisk (*) character in the name. DNS treats the * character either as a wildcard or as the * character (ASCII 42), depending on where it appears in the name. For more information, see Using an Asterisk (*) in the Names of Hosted Zones and Resource Record Sets in the Amazon Route 53 Developer Guide
    You can't use the * wildcard for resource records sets that have a type of NS.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setType
```
public void setType(String type)
```
    The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    - CloudFront distributions: A
    - ELB load balancers: A | AAAA
    - Amazon S3 buckets: A
    - Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
    Parameters:
    type - The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    
    CloudFront distributions: A
    
    ELB load balancers: A | AAAA
    
    Amazon S3 buckets: A
    
    Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
    See Also:
    
    RRType
  - getType
```
public String getType()
```
    The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    - CloudFront distributions: A
    - ELB load balancers: A | AAAA
    - Amazon S3 buckets: A
    - Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
    Returns:
    The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    
    CloudFront distributions: A
    
    ELB load balancers: A | AAAA
    
    Amazon S3 buckets: A
    
    Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
    See Also:
    
    RRType
  - withType
```
public ResourceRecordSet withType(String type)
```
    The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    - CloudFront distributions: A
    - ELB load balancers: A | AAAA
    - Amazon S3 buckets: A
    - Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
    Parameters:
    type - The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    
    CloudFront distributions: A
    
    ELB load balancers: A | AAAA
    
    Amazon S3 buckets: A
    
    Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    RRType
  - setType
```
public void setType(RRType type)
```
    The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    - CloudFront distributions: A
    - ELB load balancers: A | AAAA
    - Amazon S3 buckets: A
    - Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
    Parameters:
    type - The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    
    CloudFront distributions: A
    
    ELB load balancers: A | AAAA
    
    Amazon S3 buckets: A
    
    Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
    See Also:
    
    RRType
  - withType
```
public ResourceRecordSet withType(RRType type)
```
    The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    - CloudFront distributions: A
    - ELB load balancers: A | AAAA
    - Amazon S3 buckets: A
    - Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
    Parameters:
    type - The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types in the Amazon Route 53 Developer Guide.
    
    Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT
    
    Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
    SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.
    Values for alias resource record sets:
    
    CloudFront distributions: A
    
    ELB load balancers: A | AAAA
    
    Amazon S3 buckets: A
    
    Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    RRType
  - setSetIdentifier
```
public void setSetIdentifier(String setIdentifier)
```
    Weighted, Latency, Geo, and Failover resource record sets only: An identifier that differentiates among multiple resource record sets that have the same combination of DNS name and type. The value of SetIdentifier must be unique for each resource record set that has the same combination of DNS name and type.
    
    Parameters:
    
    setIdentifier - Weighted, Latency, Geo, and Failover resource record sets only: An identifier that differentiates among multiple resource record sets that have the same combination of DNS name and type. The value of SetIdentifier
  getSetIdentifier public String getSetIdentifier() Weighted, Latency, Geo, and Failover resource record sets only: An identifier that differentiates among multiple resource record sets that have the same combination of DNS name and type. The value of SetIdentifier must be unique for each resource record set that has the same combination of DNS name and type. Returns: Weighted, Latency, Geo, and Failover resource record sets only: An identifier that differentiates among multiple resource record sets that have the same combination of DNS name and type. The value of SetIdentifier withSetIdentifier public ResourceRecordSet withSetIdentifier(String setIdentifier) Weighted, Latency, Geo, and Failover resource record sets only: An identifier that differentiates among multiple resource record sets that have the same combination of DNS name and type. The value of SetIdentifier must be unique for each resource record set that has the same combination of DNS name and type. Parameters: setIdentifier - Weighted, Latency, Geo, and Failover resource record sets only: An identifier that differentiates among multiple resource record sets that have the same combination of DNS name and type. The value of SetIdentifier Returns: Returns a reference to this object so that method calls can be chained together. setWeight public void setWeight(Long weight) Weighted resource record sets only: Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set. Amazon Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Amazon Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following: You must specify a value for the Weight element for every weighted resource record set. You can only specify one ResourceRecord per weighted resource record set. You cannot create latency, failover, or geolocation resource record sets that have the same values for the Name and Type elements as weighted resource record sets. You can create a maximum of 100 weighted resource record sets that have the same values for the Name and Type elements. For weighted (but not weighted alias) resource record sets, if you set Weight to 0 for a resource record set, Amazon Route 53 never responds to queries with the applicable value for that resource record set. However, if you set Weight to 0 for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability. The effect of setting Weight to 0 is different when you associate health checks with weighted resource record sets. For more information, see Options for Configuring Amazon Route 53 Active-Active and Active-Passive Failover in the Amazon Route 53 Developer Guide. Parameters: weight - Weighted resource record sets only: Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set. Amazon Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Amazon Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following: You must specify a value for the Weight element for every weighted resource record set. You can only specify one ResourceRecord per weighted resource record set. You cannot create latency, failover, or geolocation resource record sets that have the same values for the Name and Type elements as weighted resource record sets. You can create a maximum of 100 weighted resource record sets that have the same values for the Name and Type elements. For weighted (but not weighted alias) resource record sets, if you set Weight to 0 for a resource record set, Amazon Route 53 never responds to queries with the applicable value for that resource record set. However, if you set Weight to 0 for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability. The effect of setting Weight to 0 is different when you associate health checks with weighted resource record sets. For more information, see Options for Configuring Amazon Route 53 Active-Active and Active-Passive Failover in the Amazon Route 53 Developer Guide. getWeight public Long getWeight() Weighted resource record sets only: Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set. Amazon Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Amazon Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following: You must specify a value for the Weight element for every weighted resource record set. You can only specify one ResourceRecord per weighted resource record set. You cannot create latency, failover, or geolocation resource record sets that have the same values for the Name and Type elements as weighted resource record sets. You can create a maximum of 100 weighted resource record sets that have the same values for the Name and Type elements. For weighted (but not weighted alias) resource record sets, if you set Weight to 0 for a resource record set, Amazon Route 53 never responds to queries with the applicable value for that resource record set. However, if you set Weight to 0 for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability. The effect of setting Weight to 0 is different when you associate health checks with weighted resource record sets. For more information, see Options for Configuring Amazon Route 53 Active-Active and Active-Passive Failover in the Amazon Route 53 Developer Guide. Returns: Weighted resource record sets only: Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set. Amazon Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Amazon Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following: You must specify a value for the Weight element for every weighted resource record set. You can only specify one ResourceRecord per weighted resource record set. You cannot create latency, failover, or geolocation resource record sets that have the same values for the Name and Type elements as weighted resource record sets. You can create a maximum of 100 weighted resource record sets that have the same values for the Name and Type elements. For weighted (but not weighted alias) resource record sets, if you set Weight to 0 for a resource record set, Amazon Route 53 never responds to queries with the applicable value for that resource record set. However, if you set Weight to 0 for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability. The effect of setting Weight to 0 is different when you associate health checks with weighted resource record sets. For more information, see Options for Configuring Amazon Route 53 Active-Active and Active-Passive Failover in the Amazon Route 53 Developer Guide. withWeight public ResourceRecordSet withWeight(Long weight) Weighted resource record sets only: Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set. Amazon Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Amazon Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following: You must specify a value for the Weight element for every weighted resource record set. You can only specify one ResourceRecord per weighted resource record set. You cannot create latency, failover, or geolocation resource record sets that have the same values for the Name and Type elements as weighted resource record sets. You can create a maximum of 100 weighted resource record sets that have the same values for the Name and Type elements. For weighted (but not weighted alias) resource record sets, if you set Weight to 0 for a resource record set, Amazon Route 53 never responds to queries with the applicable value for that resource record set. However, if you set Weight to 0 for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability. The effect of setting Weight to 0 is different when you associate health checks with weighted resource record sets. For more information, see Options for Configuring Amazon Route 53 Active-Active and Active-Passive Failover in the Amazon Route 53 Developer Guide. Parameters: weight - Weighted resource record sets only: Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set. Amazon Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Amazon Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following: You must specify a value for the Weight element for every weighted resource record set. You can only specify one ResourceRecord per weighted resource record set. You cannot create latency, failover, or geolocation resource record sets that have the same values for the Name and Type elements as weighted resource record sets. You can create a maximum of 100 weighted resource record sets that have the same values for the Name and Type elements. For weighted (but not weighted alias) resource record sets, if you set Weight to 0 for a resource record set, Amazon Route 53 never responds to queries with the applicable value for that resource record set. However, if you set Weight to 0 for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability. The effect of setting Weight to 0 is different when you associate health checks with weighted resource record sets. For more information, see Options for Configuring Amazon Route 53 Active-Active and Active-Passive Failover in the Amazon Route 53 Developer Guide. Returns: Returns a reference to this object so that method calls can be chained together. setRegion public void setRegion(String region) Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides. The resource typically is an AWS resource, such as an Amazon EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. You can create latency and latency alias resource record sets only in public hosted zones. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set. Note the following: You can only specify one ResourceRecord per latency resource record set. You can only create one latency resource record set for each Amazon EC2 region. You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets. You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. Parameters: region - Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides. The resource typically is an AWS resource, such as an Amazon EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. You can create latency and latency alias resource record sets only in public hosted zones. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set. Note the following: You can only specify one ResourceRecord per latency resource record set. You can only create one latency resource record set for each Amazon EC2 region. You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets. You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. See Also: ResourceRecordSetRegion getRegion public String getRegion() Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides. The resource typically is an AWS resource, such as an Amazon EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. You can create latency and latency alias resource record sets only in public hosted zones. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set. Note the following: You can only specify one ResourceRecord per latency resource record set. You can only create one latency resource record set for each Amazon EC2 region. You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets. You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. Returns: Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides. The resource typically is an AWS resource, such as an Amazon EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. You can create latency and latency alias resource record sets only in public hosted zones. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set. Note the following: You can only specify one ResourceRecord per latency resource record set. You can only create one latency resource record set for each Amazon EC2 region. You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets. You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. See Also: ResourceRecordSetRegion withRegion public ResourceRecordSet withRegion(String region) Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides. The resource typically is an AWS resource, such as an Amazon EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. You can create latency and latency alias resource record sets only in public hosted zones. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set. Note the following: You can only specify one ResourceRecord per latency resource record set. You can only create one latency resource record set for each Amazon EC2 region. You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets. You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. Parameters: region - Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides. The resource typically is an AWS resource, such as an Amazon EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. You can create latency and latency alias resource record sets only in public hosted zones. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set. Note the following: You can only specify one ResourceRecord per latency resource record set. You can only create one latency resource record set for each Amazon EC2 region. You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets. You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. Returns: Returns a reference to this object so that method calls can be chained together. See Also: ResourceRecordSetRegion setRegion public void setRegion(ResourceRecordSetRegion region) Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides. The resource typically is an AWS resource, such as an Amazon EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. You can create latency and latency alias resource record sets only in public hosted zones. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set. Note the following: You can only specify one ResourceRecord per latency resource record set. You can only create one latency resource record set for each Amazon EC2 region. You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets. You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. Parameters: region - Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides. The resource typically is an AWS resource, such as an Amazon EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. You can create latency and latency alias resource record sets only in public hosted zones. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set. Note the following: You can only specify one ResourceRecord per latency resource record set. You can only create one latency resource record set for each Amazon EC2 region. You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets. You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. See Also: ResourceRecordSetRegion withRegion public ResourceRecordSet withRegion(ResourceRecordSetRegion region) Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides. The resource typically is an AWS resource, such as an Amazon EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. You can create latency and latency alias resource record sets only in public hosted zones. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set. Note the following: You can only specify one ResourceRecord per latency resource record set. You can only create one latency resource record set for each Amazon EC2 region. You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets. You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. Parameters: region - Latency-based resource record sets only: The Amazon EC2 region where the resource that is specified in this resource record set resides. The resource typically is an AWS resource, such as an Amazon EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. You can create latency and latency alias resource record sets only in public hosted zones. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set. Note the following: You can only specify one ResourceRecord per latency resource record set. You can only create one latency resource record set for each Amazon EC2 region. You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets. You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. Returns: Returns a reference to this object so that method calls can be chained together. See Also: ResourceRecordSetRegion setGeoLocation public void setGeoLocation(GeoLocation geoLocation) Geo location resource record sets only: A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query. For example, if you want all queries from Africa to be routed to a web server with an IP address of 192.0.2.111, create a resource record set with a Type of A and a ContinentCode of AF. You can create geolocation and geolocation alias resource record sets only in public hosted zones. If you create separate resource record sets for overlapping geographic regions (for example, one resource record set for a continent and one for a country on the same continent), priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource. You cannot create two geolocation resource record sets that specify the same geographic location. The value * in the CountryCode element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the Name and Type elements. Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Amazon Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of CountryCode is *, which handles both queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a * resource record set, Amazon Route 53 returns a "no answer" response for queries from those locations. You cannot create non-geolocation resource record sets that have the same values for the Name and Type elements as geolocation resource record sets. Parameters: geoLocation - Geo location resource record sets only: A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query. For example, if you want all queries from Africa to be routed to a web server with an IP address of 192.0.2.111, create a resource record set with a Type of A and a ContinentCode of AF. You can create geolocation and geolocation alias resource record sets only in public hosted zones. If you create separate resource record sets for overlapping geographic regions (for example, one resource record set for a continent and one for a country on the same continent), priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource. You cannot create two geolocation resource record sets that specify the same geographic location. The value * in the CountryCode element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the Name and Type elements. Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Amazon Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of CountryCode is *, which handles both queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a * resource record set, Amazon Route 53 returns a "no answer" response for queries from those locations. You cannot create non-geolocation resource record sets that have the same values for the Name and Type getGeoLocation public GeoLocation getGeoLocation() Geo location resource record sets only: A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query. For example, if you want all queries from Africa to be routed to a web server with an IP address of 192.0.2.111, create a resource record set with a Type of A and a ContinentCode of AF. You can create geolocation and geolocation alias resource record sets only in public hosted zones. If you create separate resource record sets for overlapping geographic regions (for example, one resource record set for a continent and one for a country on the same continent), priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource. You cannot create two geolocation resource record sets that specify the same geographic location. The value * in the CountryCode element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the Name and Type elements. Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Amazon Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of CountryCode is *, which handles both queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a * resource record set, Amazon Route 53 returns a "no answer" response for queries from those locations. You cannot create non-geolocation resource record sets that have the same values for the Name and Type elements as geolocation resource record sets. Returns: Geo location resource record sets only: A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query. For example, if you want all queries from Africa to be routed to a web server with an IP address of 192.0.2.111, create a resource record set with a Type of A and a ContinentCode of AF. You can create geolocation and geolocation alias resource record sets only in public hosted zones. If you create separate resource record sets for overlapping geographic regions (for example, one resource record set for a continent and one for a country on the same continent), priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource. You cannot create two geolocation resource record sets that specify the same geographic location. The value * in the CountryCode element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the Name and Type elements. Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Amazon Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of CountryCode is *, which handles both queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a * resource record set, Amazon Route 53 returns a "no answer" response for queries from those locations. You cannot create non-geolocation resource record sets that have the same values for the Name and Type withGeoLocation public ResourceRecordSet withGeoLocation(GeoLocation geoLocation) Geo location resource record sets only: A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query. For example, if you want all queries from Africa to be routed to a web server with an IP address of 192.0.2.111, create a resource record set with a Type of A and a ContinentCode of AF. You can create geolocation and geolocation alias resource record sets only in public hosted zones. If you create separate resource record sets for overlapping geographic regions (for example, one resource record set for a continent and one for a country on the same continent), priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource. You cannot create two geolocation resource record sets that specify the same geographic location. The value * in the CountryCode element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the Name and Type elements. Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Amazon Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of CountryCode is *, which handles both queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a * resource record set, Amazon Route 53 returns a "no answer" response for queries from those locations. You cannot create non-geolocation resource record sets that have the same values for the Name and Type elements as geolocation resource record sets. Parameters: geoLocation - Geo location resource record sets only: A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query. For example, if you want all queries from Africa to be routed to a web server with an IP address of 192.0.2.111, create a resource record set with a Type of A and a ContinentCode of AF. You can create geolocation and geolocation alias resource record sets only in public hosted zones. If you create separate resource record sets for overlapping geographic regions (for example, one resource record set for a continent and one for a country on the same continent), priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource. You cannot create two geolocation resource record sets that specify the same geographic location. The value * in the CountryCode element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the Name and Type elements. Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Amazon Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of CountryCode is *, which handles both queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a * resource record set, Amazon Route 53 returns a "no answer" response for queries from those locations. You cannot create non-geolocation resource record sets that have the same values for the Name and Type Returns: Returns a reference to this object so that method calls can be chained together. setFailover public void setFailover(String failover) Failover resource record sets only: To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. You can create failover and failover alias resource record sets only in public hosted zones. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set. When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide. Valid values: PRIMARY | SECONDARY Parameters: failover - Failover resource record sets only: To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. You can create failover and failover alias resource record sets only in public hosted zones. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set. When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide. Valid values: PRIMARY | SECONDARY See Also: ResourceRecordSetFailover getFailover public String getFailover() Failover resource record sets only: To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. You can create failover and failover alias resource record sets only in public hosted zones. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set. When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide. Valid values: PRIMARY | SECONDARY Returns: Failover resource record sets only: To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY . In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. You can create failover and failover alias resource record sets only in public hosted zones. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set. When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide. Valid values: PRIMARY | SECONDARY See Also: ResourceRecordSetFailover withFailover public ResourceRecordSet withFailover(String failover) Failover resource record sets only: To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. You can create failover and failover alias resource record sets only in public hosted zones. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set. When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide. Valid values: PRIMARY | SECONDARY Parameters: failover - Failover resource record sets only: To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. You can create failover and failover alias resource record sets only in public hosted zones. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set. When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide. Valid values: PRIMARY | SECONDARY Returns: Returns a reference to this object so that method calls can be chained together. See Also: ResourceRecordSetFailover setFailover public void setFailover(ResourceRecordSetFailover failover) Failover resource record sets only: To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. You can create failover and failover alias resource record sets only in public hosted zones. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set. When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide. Valid values: PRIMARY | SECONDARY Parameters: failover - Failover resource record sets only: To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. You can create failover and failover alias resource record sets only in public hosted zones. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set. When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide. Valid values: PRIMARY | SECONDARY See Also: ResourceRecordSetFailover withFailover public ResourceRecordSet withFailover(ResourceRecordSetFailover failover) Failover resource record sets only: To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. You can create failover and failover alias resource record sets only in public hosted zones. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set. When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide. Valid values: PRIMARY | SECONDARY Parameters: failover - Failover resource record sets only: To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. You can create failover and failover alias resource record sets only in public hosted zones. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set. When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide. Valid values: PRIMARY | SECONDARY Returns: Returns a reference to this object so that method calls can be chained together. See Also: ResourceRecordSetFailover setTTL public void setTTL(Long tTL) The cache time to live for the current resource record set. Note the following: If you're creating a non-alias resource record set, TTL is required. If you're creating an alias resource record set, omit TTL. Amazon Route 53 uses the value of TTL for the alias target. If you're associating this resource record set with a health check (if you're adding a HealthCheckId element), we recommend that you specify a TTL of 60 seconds or less so clients respond quickly to changes in health status. All of the resource record sets in a group of weighted, latency, geolocation, or failover resource record sets must have the same value for TTL. If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a TTL of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds (the TTL for load balancers) will change the effect of the values that you specify for Weight. Parameters: tTL - The cache time to live for the current resource record set. Note the following: If you're creating a non-alias resource record set, TTL is required. If you're creating an alias resource record set, omit TTL. Amazon Route 53 uses the value of TTL for the alias target. If you're associating this resource record set with a health check (if you're adding a HealthCheckId element), we recommend that you specify a TTL of 60 seconds or less so clients respond quickly to changes in health status. All of the resource record sets in a group of weighted, latency, geolocation, or failover resource record sets must have the same value for TTL. If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a TTL of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds (the TTL for load balancers) will change the effect of the values that you specify for Weight. getTTL public Long getTTL() The cache time to live for the current resource record set. Note the following: If you're creating a non-alias resource record set, TTL is required. If you're creating an alias resource record set, omit TTL. Amazon Route 53 uses the value of TTL for the alias target. If you're associating this resource record set with a health check (if you're adding a HealthCheckId element), we recommend that you specify a TTL of 60 seconds or less so clients respond quickly to changes in health status. All of the resource record sets in a group of weighted, latency, geolocation, or failover resource record sets must have the same value for TTL. If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a TTL of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds (the TTL for load balancers) will change the effect of the values that you specify for Weight. Returns: The cache time to live for the current resource record set. Note the following: If you're creating a non-alias resource record set, TTL is required. If you're creating an alias resource record set, omit TTL. Amazon Route 53 uses the value of TTL for the alias target. If you're associating this resource record set with a health check (if you're adding a HealthCheckId element), we recommend that you specify a TTL of 60 seconds or less so clients respond quickly to changes in health status. All of the resource record sets in a group of weighted, latency, geolocation, or failover resource record sets must have the same value for TTL. If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a TTL of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds (the TTL for load balancers) will change the effect of the values that you specify for Weight . withTTL public ResourceRecordSet withTTL(Long tTL) The cache time to live for the current resource record set. Note the following: If you're creating a non-alias resource record set, TTL is required. If you're creating an alias resource record set, omit TTL. Amazon Route 53 uses the value of TTL for the alias target. If you're associating this resource record set with a health check (if you're adding a HealthCheckId element), we recommend that you specify a TTL of 60 seconds or less so clients respond quickly to changes in health status. All of the resource record sets in a group of weighted, latency, geolocation, or failover resource record sets must have the same value for TTL. If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a TTL of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds (the TTL for load balancers) will change the effect of the values that you specify for Weight. Parameters: tTL - The cache time to live for the current resource record set. Note the following: If you're creating a non-alias resource record set, TTL is required. If you're creating an alias resource record set, omit TTL. Amazon Route 53 uses the value of TTL for the alias target. If you're associating this resource record set with a health check (if you're adding a HealthCheckId element), we recommend that you specify a TTL of 60 seconds or less so clients respond quickly to changes in health status. All of the resource record sets in a group of weighted, latency, geolocation, or failover resource record sets must have the same value for TTL. If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a TTL of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds (the TTL for load balancers) will change the effect of the values that you specify for Weight. Returns: Returns a reference to this object so that method calls can be chained together. getResourceRecords public List<ResourceRecord> getResourceRecords() A complex type that contains the resource records for the current resource record set. Returns: A complex type that contains the resource records for the current resource record set. setResourceRecords public void setResourceRecords(Collection<ResourceRecord> resourceRecords) A complex type that contains the resource records for the current resource record set. Parameters: resourceRecords - A complex type that contains the resource records for the current resource record set. withResourceRecords public ResourceRecordSet withResourceRecords(ResourceRecord... resourceRecords) A complex type that contains the resource records for the current resource record set. NOTE: This method appends the values to the existing list (if any). Use setResourceRecords(java.util.Collection) or withResourceRecords(java.util.Collection) if you want to override the existing values. Parameters: resourceRecords - A complex type that contains the resource records for the current resource record set. Returns: Returns a reference to this object so that method calls can be chained together. withResourceRecords public ResourceRecordSet withResourceRecords(Collection<ResourceRecord> resourceRecords) A complex type that contains the resource records for the current resource record set. Parameters: resourceRecords - A complex type that contains the resource records for the current resource record set. Returns: Returns a reference to this object so that method calls can be chained together. setAliasTarget public void setAliasTarget(AliasTarget aliasTarget) Alias resource record sets only: Information about the AWS resource to which you are redirecting traffic. Parameters: aliasTarget - Alias resource record sets only: getAliasTarget public AliasTarget getAliasTarget() Alias resource record sets only: Information about the AWS resource to which you are redirecting traffic. Returns: Alias resource record sets only: withAliasTarget public ResourceRecordSet withAliasTarget(AliasTarget aliasTarget) Alias resource record sets only: Information about the AWS resource to which you are redirecting traffic. Parameters: aliasTarget - Alias resource record sets only: Returns: Returns a reference to this object so that method calls can be chained together. setHealthCheckId public void setHealthCheckId(String healthCheckId) Health Check resource record sets only, not required for alias resource record sets: An identifier that is used to identify health check associated with the resource record set. Parameters: healthCheckId - Health Check resource record sets only, not required for alias resource record sets: getHealthCheckId public String getHealthCheckId() Health Check resource record sets only, not required for alias resource record sets: An identifier that is used to identify health check associated with the resource record set. Returns: Health Check resource record sets only, not required for alias resource record sets: withHealthCheckId public ResourceRecordSet withHealthCheckId(String healthCheckId) Health Check resource record sets only, not required for alias resource record sets: An identifier that is used to identify health check associated with the resource record set. Parameters: healthCheckId - Health Check resource record sets only, not required for alias resource record sets: Returns: Returns a reference to this object so that method calls can be chained together. setTrafficPolicyInstanceId public void setTrafficPolicyInstanceId(String trafficPolicyInstanceId) Parameters: trafficPolicyInstanceId - getTrafficPolicyInstanceId public String getTrafficPolicyInstanceId() Returns: withTrafficPolicyInstanceId public ResourceRecordSet withTrafficPolicyInstanceId(String trafficPolicyInstanceId) Parameters: trafficPolicyInstanceId - Returns: Returns a reference to this object so that method calls can be chained together. toString public String toString() Returns a string representation of this object; useful for testing and debugging. Overrides: toString in class Object Returns: A string representation of this object. See Also: Object.toString() equals public boolean equals(Object obj) Overrides: equals in class Object hashCode public int hashCode() Overrides: hashCode in class Object clone public ResourceRecordSet clone() Overrides: clone in class Object

Did this page help you?

Class ResourceRecordSet

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

ResourceRecordSet

ResourceRecordSet

ResourceRecordSet

Method Detail

setName

getName

withName

setType

getType

withType

setType

withType

setSetIdentifier

getSetIdentifier

withSetIdentifier

setWeight

getWeight

withWeight

setRegion

getRegion

withRegion

setRegion

withRegion

setGeoLocation

getGeoLocation

withGeoLocation

setFailover

getFailover

withFailover

setFailover

withFailover

setTTL

getTTL

withTTL

getResourceRecords

setResourceRecords

withResourceRecords

withResourceRecords

setAliasTarget

getAliasTarget

withAliasTarget

setHealthCheckId

getHealthCheckId

withHealthCheckId

setTrafficPolicyInstanceId

getTrafficPolicyInstanceId

withTrafficPolicyInstanceId

toString

equals

hashCode

clone