JobOutput (AWS SDK for Java

java.lang.Object
- com.amazonaws.services.elastictranscoder.model.JobOutput

All Implemented Interfaces:

Serializable, Cloneable
```
public class JobOutput
extends Object
implements Serializable, Cloneable
```
Outputs recommended instead.If you specified one output for a job, information about that output. If you specified multiple outputs for a job, the Output object lists information about the first output. This duplicates the information that is listed for the first output in the Outputs object.

See Also:

Serialized Form

Constructor Summary

Constructors
Constructor and Description

JobOutput()

Constructors
Constructor and Description
`JobOutput()`

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`JobOutput`	`clone()`
`boolean`	`equals(Object obj)`
`JobAlbumArt`	`getAlbumArt()` The album art to be associated with the output file, if any.
`String`	`getAppliedColorSpaceConversion()` If Elastic Transcoder used a preset with a `ColorSpaceConversionMode` to transcode the output file, the `AppliedColorSpaceConversion` parameter shows the conversion used.
`Captions`	`getCaptions()` You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another.
`List<Clip>`	`getComposition()` You can create an output file that contains an excerpt from the input file.
`Long`	`getDuration()` Duration of the output file, in seconds.
`Long`	`getDurationMillis()` Duration of the output file, in milliseconds.
`Encryption`	`getEncryption()` The encryption settings, if any, that you want Elastic Transcoder to apply to your output files.
`Long`	`getFileSize()` File size of the output file, in bytes.
`String`	`getFrameRate()` Frame rate of the output file, in frames per second.
`Integer`	`getHeight()` Height of the output file, in pixels.
`String`	`getId()` A sequential counter, starting with 1, that identifies an output among the outputs from the current job.
`String`	`getKey()` The name to assign to the transcoded file.
`String`	`getPresetId()` The value of the `Id` object for the preset that you want to use for this job.
`String`	`getRotate()` The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input.
`String`	`getSegmentDuration()` (Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in `PresetId` for which the value of `Container` is `fmp4` (Fragmented MP4) or `ts` (MPEG-TS), `SegmentDuration` is the target maximum duration of each segment in seconds.
`String`	`getStatus()` The status of one output in a job.
`String`	`getStatusDetail()` Information that further explains `Status`.
`Encryption`	`getThumbnailEncryption()` The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
`String`	`getThumbnailPattern()` Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files.
`List<JobWatermark>`	`getWatermarks()` Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding.
`Integer`	`getWidth()` Specifies the width of the output file in pixels.
`int`	`hashCode()`
`void`	`setAlbumArt(JobAlbumArt albumArt)` The album art to be associated with the output file, if any.
`void`	`setAppliedColorSpaceConversion(String appliedColorSpaceConversion)` If Elastic Transcoder used a preset with a `ColorSpaceConversionMode` to transcode the output file, the `AppliedColorSpaceConversion` parameter shows the conversion used.
`void`	`setCaptions(Captions captions)` You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another.
`void`	`setComposition(Collection<Clip> composition)` You can create an output file that contains an excerpt from the input file.
`void`	`setDuration(Long duration)` Duration of the output file, in seconds.
`void`	`setDurationMillis(Long durationMillis)` Duration of the output file, in milliseconds.
`void`	`setEncryption(Encryption encryption)` The encryption settings, if any, that you want Elastic Transcoder to apply to your output files.
`void`	`setFileSize(Long fileSize)` File size of the output file, in bytes.
`void`	`setFrameRate(String frameRate)` Frame rate of the output file, in frames per second.
`void`	`setHeight(Integer height)` Height of the output file, in pixels.
`void`	`setId(String id)` A sequential counter, starting with 1, that identifies an output among the outputs from the current job.
`void`	`setKey(String key)` The name to assign to the transcoded file.
`void`	`setPresetId(String presetId)` The value of the `Id` object for the preset that you want to use for this job.
`void`	`setRotate(String rotate)` The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input.
`void`	`setSegmentDuration(String segmentDuration)` (Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in `PresetId` for which the value of `Container` is `fmp4` (Fragmented MP4) or `ts` (MPEG-TS), `SegmentDuration` is the target maximum duration of each segment in seconds.
`void`	`setStatus(String status)` The status of one output in a job.
`void`	`setStatusDetail(String statusDetail)` Information that further explains `Status`.
`void`	`setThumbnailEncryption(Encryption thumbnailEncryption)` The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
`void`	`setThumbnailPattern(String thumbnailPattern)` Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files.
`void`	`setWatermarks(Collection<JobWatermark> watermarks)` Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding.
`void`	`setWidth(Integer width)` Specifies the width of the output file in pixels.
`String`	`toString()` Returns a string representation of this object; useful for testing and debugging.
`JobOutput`	`withAlbumArt(JobAlbumArt albumArt)` The album art to be associated with the output file, if any.
`JobOutput`	`withAppliedColorSpaceConversion(String appliedColorSpaceConversion)` If Elastic Transcoder used a preset with a `ColorSpaceConversionMode` to transcode the output file, the `AppliedColorSpaceConversion` parameter shows the conversion used.
`JobOutput`	`withCaptions(Captions captions)` You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another.
`JobOutput`	`withComposition(Clip... composition)` You can create an output file that contains an excerpt from the input file.
`JobOutput`	`withComposition(Collection<Clip> composition)` You can create an output file that contains an excerpt from the input file.
`JobOutput`	`withDuration(Long duration)` Duration of the output file, in seconds.
`JobOutput`	`withDurationMillis(Long durationMillis)` Duration of the output file, in milliseconds.
`JobOutput`	`withEncryption(Encryption encryption)` The encryption settings, if any, that you want Elastic Transcoder to apply to your output files.
`JobOutput`	`withFileSize(Long fileSize)` File size of the output file, in bytes.
`JobOutput`	`withFrameRate(String frameRate)` Frame rate of the output file, in frames per second.
`JobOutput`	`withHeight(Integer height)` Height of the output file, in pixels.
`JobOutput`	`withId(String id)` A sequential counter, starting with 1, that identifies an output among the outputs from the current job.
`JobOutput`	`withKey(String key)` The name to assign to the transcoded file.
`JobOutput`	`withPresetId(String presetId)` The value of the `Id` object for the preset that you want to use for this job.
`JobOutput`	`withRotate(String rotate)` The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input.
`JobOutput`	`withSegmentDuration(String segmentDuration)` (Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in `PresetId` for which the value of `Container` is `fmp4` (Fragmented MP4) or `ts` (MPEG-TS), `SegmentDuration` is the target maximum duration of each segment in seconds.
`JobOutput`	`withStatus(String status)` The status of one output in a job.
`JobOutput`	`withStatusDetail(String statusDetail)` Information that further explains `Status`.
`JobOutput`	`withThumbnailEncryption(Encryption thumbnailEncryption)` The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
`JobOutput`	`withThumbnailPattern(String thumbnailPattern)` Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files.
`JobOutput`	`withWatermarks(Collection<JobWatermark> watermarks)` Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding.
`JobOutput`	`withWatermarks(JobWatermark... watermarks)` Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding.
`JobOutput`	`withWidth(Integer width)` Specifies the width of the output file in pixels.

Methods inherited from class java.lang.Object
getClass, notify, notifyAll, wait, wait, wait

- Constructor Detail
  - JobOutput
```
public JobOutput()
```
- Method Detail
  - setId
```
public void setId(String id)
```
    A sequential counter, starting with 1, that identifies an output among the outputs from the current job. In the Output syntax, this value is always 1.
    
    Parameters:
    
    id - A sequential counter, starting with 1, that identifies an output among the outputs from the current job. In the Output syntax, this value is always 1.
  - getId
```
public String getId()
```
    A sequential counter, starting with 1, that identifies an output among the outputs from the current job. In the Output syntax, this value is always 1.
    
    Returns:
    
    A sequential counter, starting with 1, that identifies an output among the outputs from the current job. In the Output syntax, this value is always 1.
  - withId
```
public JobOutput withId(String id)
```
    A sequential counter, starting with 1, that identifies an output among the outputs from the current job. In the Output syntax, this value is always 1.
    
    Parameters:
    
    id - A sequential counter, starting with 1, that identifies an output among the outputs from the current job. In the Output syntax, this value is always 1.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setKey
```
public void setKey(String key)
```
    The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID.
    
    Parameters:
    
    key - The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID.
  - getKey
```
public String getKey()
```
    The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID.
    
    Returns:
    
    The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID.
  - withKey
```
public JobOutput withKey(String key)
```
    The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID.
    
    Parameters:
    
    key - The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket specified by the OutputBucket object in the pipeline that is specified by the pipeline ID.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setThumbnailPattern
```
public void setThumbnailPattern(String thumbnailPattern)
```
    Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files.
    
    If you don't want Elastic Transcoder to create thumbnails, specify "".
    
    If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence:
    - {count} (Required): If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count}, Elastic Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file.
      If you specify a literal value and/or {resolution} but you omit {count}, Elastic Transcoder returns a validation error and does not create the job.
    - Literal values (Optional): You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count}.
    - {resolution} (Optional): If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object.
    When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput. Elastic Transcoder also appends the applicable file name extension.
    Parameters:
    thumbnailPattern - Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files.
    
    If you don't want Elastic Transcoder to create thumbnails, specify "".
    
    If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence:
    
    {count} (Required): If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count}, Elastic Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file.
    If you specify a literal value and/or {resolution} but you omit {count}, Elastic Transcoder returns a validation error and does not create the job.
    
    Literal values (Optional): You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count}.
    
    {resolution} (Optional): If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object.
    
    When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput. Elastic Transcoder also appends the applicable file name extension.
  - getThumbnailPattern
```
public String getThumbnailPattern()
```
    Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files.
    
    If you don't want Elastic Transcoder to create thumbnails, specify "".
    
    If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence:
    - {count} (Required): If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count}, Elastic Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file.
      If you specify a literal value and/or {resolution} but you omit {count}, Elastic Transcoder returns a validation error and does not create the job.
    - Literal values (Optional): You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count}.
    - {resolution} (Optional): If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object.
    When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput. Elastic Transcoder also appends the applicable file name extension.
    Returns:
    Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files.
    
    If you don't want Elastic Transcoder to create thumbnails, specify "".
    
    If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence:
    
    {count} (Required): If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count}, Elastic Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file.
    If you specify a literal value and/or {resolution} but you omit {count}, Elastic Transcoder returns a validation error and does not create the job.
    
    Literal values (Optional): You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count}.
    
    {resolution} (Optional): If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object.
    
    When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput. Elastic Transcoder also appends the applicable file name extension.
  - withThumbnailPattern
```
public JobOutput withThumbnailPattern(String thumbnailPattern)
```
    Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files.
    
    If you don't want Elastic Transcoder to create thumbnails, specify "".
    
    If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence:
    - {count} (Required): If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count}, Elastic Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file.
      If you specify a literal value and/or {resolution} but you omit {count}, Elastic Transcoder returns a validation error and does not create the job.
    - Literal values (Optional): You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count}.
    - {resolution} (Optional): If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object.
    When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput. Elastic Transcoder also appends the applicable file name extension.
    Parameters:
    thumbnailPattern - Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files.
    
    If you don't want Elastic Transcoder to create thumbnails, specify "".
    
    If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence:
    
    {count} (Required): If you want to create thumbnails, you must include {count} in the ThumbnailPattern object. Wherever you specify {count}, Elastic Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail file names. The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file.
    If you specify a literal value and/or {resolution} but you omit {count}, Elastic Transcoder returns a validation error and does not create the job.
    
    Literal values (Optional): You can specify literal values anywhere in the ThumbnailPattern object. For example, you can include them as a file name prefix or as a delimiter between {resolution} and {count}.
    
    {resolution} (Optional): If you want Elastic Transcoder to include the resolution in the file name, include {resolution} in the ThumbnailPattern object.
    
    When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that appears in the preset that you specified in the PresetID value of CreateJobOutput. Elastic Transcoder also appends the applicable file name extension.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setThumbnailEncryption
```
public void setThumbnailEncryption(Encryption thumbnailEncryption)
```
    The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
    
    Parameters:
    
    thumbnailEncryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
  - getThumbnailEncryption
```
public Encryption getThumbnailEncryption()
```
    The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
    
    Returns:
    
    The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
  - withThumbnailEncryption
```
public JobOutput withThumbnailEncryption(Encryption thumbnailEncryption)
```
    The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
    
    Parameters:
    
    thumbnailEncryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setRotate
```
public void setRotate(String rotate)
```
    The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values:
    
    auto, 0, 90, 180, 270
    
    The value auto generally works only if the file that you're transcoding contains rotation metadata.
    
    Parameters:
    
    rotate - The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values:
    
    auto, 0, 90, 180, 270
    
    The value auto generally works only if the file that you're transcoding contains rotation metadata.
  - getRotate
```
public String getRotate()
```
    The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values:
    
    auto, 0, 90, 180, 270
    
    The value auto generally works only if the file that you're transcoding contains rotation metadata.
    
    Returns:
    
    The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values:
    
    auto, 0, 90, 180, 270
    
    The value auto generally works only if the file that you're transcoding contains rotation metadata.
  - withRotate
```
public JobOutput withRotate(String rotate)
```
    The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values:
    
    auto, 0, 90, 180, 270
    
    The value auto generally works only if the file that you're transcoding contains rotation metadata.
    
    Parameters:
    
    rotate - The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values:
    
    auto, 0, 90, 180, 270
    
    The value auto generally works only if the file that you're transcoding contains rotation metadata.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setPresetId
```
public void setPresetId(String presetId)
```
    The value of the Id object for the preset that you want to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To use a preset that you created, specify the preset ID that Elastic Transcoder returned in the response when you created the preset. You can also use the Elastic Transcoder system presets, which you can get with ListPresets.
    
    Parameters:
    
    presetId - The value of the Id object for the preset that you want to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To use a preset that you created, specify the preset ID that Elastic Transcoder returned in the response when you created the preset. You can also use the Elastic Transcoder system presets, which you can get with ListPresets.
  - getPresetId
```
public String getPresetId()
```
    The value of the Id object for the preset that you want to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To use a preset that you created, specify the preset ID that Elastic Transcoder returned in the response when you created the preset. You can also use the Elastic Transcoder system presets, which you can get with ListPresets.
    
    Returns:
    
    The value of the Id object for the preset that you want to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To use a preset that you created, specify the preset ID that Elastic Transcoder returned in the response when you created the preset. You can also use the Elastic Transcoder system presets, which you can get with ListPresets.
  - withPresetId
```
public JobOutput withPresetId(String presetId)
```
    The value of the Id object for the preset that you want to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To use a preset that you created, specify the preset ID that Elastic Transcoder returned in the response when you created the preset. You can also use the Elastic Transcoder system presets, which you can get with ListPresets.
    
    Parameters:
    
    presetId - The value of the Id object for the preset that you want to use for this job. The preset determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To use a preset that you created, specify the preset ID that Elastic Transcoder returned in the response when you created the preset. You can also use the Elastic Transcoder system presets, which you can get with ListPresets.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setSegmentDuration
```
public void setSegmentDuration(String segmentDuration)
```
    (Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration, though individual segments might be shorter or longer.
    
    The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration, the duration of the last segment is the remainder of total length/SegmentDuration.
    
    Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys of the associated playlist.
    
    Parameters:
    
    segmentDuration - (Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration, though individual segments might be shorter or longer.
    
    The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration, the duration of the last segment is the remainder of total length/SegmentDuration.
    
    Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys
  getSegmentDuration public String getSegmentDuration() (Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration, though individual segments might be shorter or longer. The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration, the duration of the last segment is the remainder of total length/SegmentDuration. Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys of the associated playlist. Returns: (Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration, though individual segments might be shorter or longer. The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration , the duration of the last segment is the remainder of total length/SegmentDuration. Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys withSegmentDuration public JobOutput withSegmentDuration(String segmentDuration) (Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration, though individual segments might be shorter or longer. The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration, the duration of the last segment is the remainder of total length/SegmentDuration. Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys of the associated playlist. Parameters: segmentDuration - (Outputs in Fragmented MP4 or MPEG-TS format only.If you specify a preset in PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is stored in a separate .ts file. For HLSv4 and Smooth playlists, all media segments for an output are stored in a single file. Each segment is approximately the length of the SegmentDuration, though individual segments might be shorter or longer. The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by SegmentDuration, the duration of the last segment is the remainder of total length/SegmentDuration. Elastic Transcoder creates an output-specific playlist for each output HLS output that you specify in OutputKeys. To add an output to the master playlist for this job, include it in the OutputKeys Returns: Returns a reference to this object so that method calls can be chained together. setStatus public void setStatus(String status) The status of one output in a job. If you specified only one output for the job, Outputs:Status is always the same as Job:Status. If you specified more than one output: Job:Status and Outputs:Status for all of the outputs is Submitted until Elastic Transcoder starts to process the first output. When Elastic Transcoder starts to process the first output, Outputs:Status for that output and Job:Status both change to Progressing. For each output, the value of Outputs:Status remains Submitted until Elastic Transcoder starts to process the output. Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error. When all of the outputs reach a terminal status, Job:Status changes to Complete only if Outputs:Status for all of the outputs is Complete. If Outputs:Status for one or more outputs is Error, the terminal status for Job:Status is also Error. The value of Status is one of the following: Submitted, Progressing, Complete, Canceled, or Error. Parameters: status - The status of one output in a job. If you specified only one output for the job, Outputs:Status is always the same as Job:Status. If you specified more than one output: Job:Status and Outputs:Status for all of the outputs is Submitted until Elastic Transcoder starts to process the first output. When Elastic Transcoder starts to process the first output, Outputs:Status for that output and Job:Status both change to Progressing. For each output, the value of Outputs:Status remains Submitted until Elastic Transcoder starts to process the output. Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error. When all of the outputs reach a terminal status, Job:Status changes to Complete only if Outputs:Status for all of the outputs is Complete. If Outputs:Status for one or more outputs is Error, the terminal status for Job:Status is also Error. The value of Status is one of the following: Submitted, Progressing, Complete, Canceled, or Error. getStatus public String getStatus() The status of one output in a job. If you specified only one output for the job, Outputs:Status is always the same as Job:Status. If you specified more than one output: Job:Status and Outputs:Status for all of the outputs is Submitted until Elastic Transcoder starts to process the first output. When Elastic Transcoder starts to process the first output, Outputs:Status for that output and Job:Status both change to Progressing. For each output, the value of Outputs:Status remains Submitted until Elastic Transcoder starts to process the output. Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error. When all of the outputs reach a terminal status, Job:Status changes to Complete only if Outputs:Status for all of the outputs is Complete. If Outputs:Status for one or more outputs is Error, the terminal status for Job:Status is also Error. The value of Status is one of the following: Submitted, Progressing, Complete, Canceled, or Error. Returns: The status of one output in a job. If you specified only one output for the job, Outputs:Status is always the same as Job:Status. If you specified more than one output: Job:Status and Outputs:Status for all of the outputs is Submitted until Elastic Transcoder starts to process the first output. When Elastic Transcoder starts to process the first output, Outputs:Status for that output and Job:Status both change to Progressing. For each output, the value of Outputs:Status remains Submitted until Elastic Transcoder starts to process the output. Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error. When all of the outputs reach a terminal status, Job:Status changes to Complete only if Outputs:Status for all of the outputs is Complete. If Outputs:Status for one or more outputs is Error, the terminal status for Job:Status is also Error. The value of Status is one of the following: Submitted, Progressing, Complete, Canceled, or Error. withStatus public JobOutput withStatus(String status) The status of one output in a job. If you specified only one output for the job, Outputs:Status is always the same as Job:Status. If you specified more than one output: Job:Status and Outputs:Status for all of the outputs is Submitted until Elastic Transcoder starts to process the first output. When Elastic Transcoder starts to process the first output, Outputs:Status for that output and Job:Status both change to Progressing. For each output, the value of Outputs:Status remains Submitted until Elastic Transcoder starts to process the output. Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error. When all of the outputs reach a terminal status, Job:Status changes to Complete only if Outputs:Status for all of the outputs is Complete. If Outputs:Status for one or more outputs is Error, the terminal status for Job:Status is also Error. The value of Status is one of the following: Submitted, Progressing, Complete, Canceled, or Error. Parameters: status - The status of one output in a job. If you specified only one output for the job, Outputs:Status is always the same as Job:Status. If you specified more than one output: Job:Status and Outputs:Status for all of the outputs is Submitted until Elastic Transcoder starts to process the first output. When Elastic Transcoder starts to process the first output, Outputs:Status for that output and Job:Status both change to Progressing. For each output, the value of Outputs:Status remains Submitted until Elastic Transcoder starts to process the output. Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error. When all of the outputs reach a terminal status, Job:Status changes to Complete only if Outputs:Status for all of the outputs is Complete. If Outputs:Status for one or more outputs is Error, the terminal status for Job:Status is also Error. The value of Status is one of the following: Submitted, Progressing, Complete, Canceled, or Error. Returns: Returns a reference to this object so that method calls can be chained together. setStatusDetail public void setStatusDetail(String statusDetail) Information that further explains Status. Parameters: statusDetail - Information that further explains Status. getStatusDetail public String getStatusDetail() Information that further explains Status. Returns: Information that further explains Status. withStatusDetail public JobOutput withStatusDetail(String statusDetail) Information that further explains Status. Parameters: statusDetail - Information that further explains Status. Returns: Returns a reference to this object so that method calls can be chained together. setDuration public void setDuration(Long duration) Duration of the output file, in seconds. Parameters: duration - Duration of the output file, in seconds. getDuration public Long getDuration() Duration of the output file, in seconds. Returns: Duration of the output file, in seconds. withDuration public JobOutput withDuration(Long duration) Duration of the output file, in seconds. Parameters: duration - Duration of the output file, in seconds. Returns: Returns a reference to this object so that method calls can be chained together. setWidth public void setWidth(Integer width) Specifies the width of the output file in pixels. Parameters: width - Specifies the width of the output file in pixels. getWidth public Integer getWidth() Specifies the width of the output file in pixels. Returns: Specifies the width of the output file in pixels. withWidth public JobOutput withWidth(Integer width) Specifies the width of the output file in pixels. Parameters: width - Specifies the width of the output file in pixels. Returns: Returns a reference to this object so that method calls can be chained together. setHeight public void setHeight(Integer height) Height of the output file, in pixels. Parameters: height - Height of the output file, in pixels. getHeight public Integer getHeight() Height of the output file, in pixels. Returns: Height of the output file, in pixels. withHeight public JobOutput withHeight(Integer height) Height of the output file, in pixels. Parameters: height - Height of the output file, in pixels. Returns: Returns a reference to this object so that method calls can be chained together. setFrameRate public void setFrameRate(String frameRate) Frame rate of the output file, in frames per second. Parameters: frameRate - Frame rate of the output file, in frames per second. getFrameRate public String getFrameRate() Frame rate of the output file, in frames per second. Returns: Frame rate of the output file, in frames per second. withFrameRate public JobOutput withFrameRate(String frameRate) Frame rate of the output file, in frames per second. Parameters: frameRate - Frame rate of the output file, in frames per second. Returns: Returns a reference to this object so that method calls can be chained together. setFileSize public void setFileSize(Long fileSize) File size of the output file, in bytes. Parameters: fileSize - File size of the output file, in bytes. getFileSize public Long getFileSize() File size of the output file, in bytes. Returns: File size of the output file, in bytes. withFileSize public JobOutput withFileSize(Long fileSize) File size of the output file, in bytes. Parameters: fileSize - File size of the output file, in bytes. Returns: Returns a reference to this object so that method calls can be chained together. setDurationMillis public void setDurationMillis(Long durationMillis) Duration of the output file, in milliseconds. Parameters: durationMillis - Duration of the output file, in milliseconds. getDurationMillis public Long getDurationMillis() Duration of the output file, in milliseconds. Returns: Duration of the output file, in milliseconds. withDurationMillis public JobOutput withDurationMillis(Long durationMillis) Duration of the output file, in milliseconds. Parameters: durationMillis - Duration of the output file, in milliseconds. Returns: Returns a reference to this object so that method calls can be chained together. getWatermarks public List<JobWatermark> getWatermarks() Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add will cover the first one, the third one will cover the second, and the fourth one will cover the third. Returns: Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add will cover the first one, the third one will cover the second, and the fourth one will cover the third. setWatermarks public void setWatermarks(Collection<JobWatermark> watermarks) Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add will cover the first one, the third one will cover the second, and the fourth one will cover the third. Parameters: watermarks - Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add will cover the first one, the third one will cover the second, and the fourth one will cover the third. withWatermarks public JobOutput withWatermarks(JobWatermark... watermarks) Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add will cover the first one, the third one will cover the second, and the fourth one will cover the third. NOTE: This method appends the values to the existing list (if any). Use setWatermarks(java.util.Collection) or withWatermarks(java.util.Collection) if you want to override the existing values. Parameters: watermarks - Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add will cover the first one, the third one will cover the second, and the fourth one will cover the third. Returns: Returns a reference to this object so that method calls can be chained together. withWatermarks public JobOutput withWatermarks(Collection<JobWatermark> watermarks) Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add will cover the first one, the third one will cover the second, and the fourth one will cover the third. Parameters: watermarks - Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset that you specify in Preset for the current output. Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add will cover the first one, the third one will cover the second, and the fourth one will cover the third. Returns: Returns a reference to this object so that method calls can be chained together. setAlbumArt public void setAlbumArt(JobAlbumArt albumArt) The album art to be associated with the output file, if any. Parameters: albumArt - The album art to be associated with the output file, if any. getAlbumArt public JobAlbumArt getAlbumArt() The album art to be associated with the output file, if any. Returns: The album art to be associated with the output file, if any. withAlbumArt public JobOutput withAlbumArt(JobAlbumArt albumArt) The album art to be associated with the output file, if any. Parameters: albumArt - The album art to be associated with the output file, if any. Returns: Returns a reference to this object so that method calls can be chained together. getComposition public List<Clip> getComposition() You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null. Returns: You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null. setComposition public void setComposition(Collection<Clip> composition) You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null. Parameters: composition - You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null. withComposition public JobOutput withComposition(Clip... composition) You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null. NOTE: This method appends the values to the existing list (if any). Use setComposition(java.util.Collection) or withComposition(java.util.Collection) if you want to override the existing values. Parameters: composition - You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null. Returns: Returns a reference to this object so that method calls can be chained together. withComposition public JobOutput withComposition(Collection<Clip> composition) You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null. Parameters: composition - You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null. Returns: Returns a reference to this object so that method calls can be chained together. setCaptions public void setCaptions(Captions captions) You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608, first non-empty channel only), CEA-708 (EIA-708, first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt, scc, smpt, srt, ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain, and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages. Parameters: captions - You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608, first non-empty channel only), CEA-708 (EIA-708, first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt, scc, smpt, srt, ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain, and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages. getCaptions public Captions getCaptions() You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608, first non-empty channel only), CEA-708 (EIA-708, first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt, scc, smpt, srt, ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain, and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages. Returns: You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608, first non-empty channel only), CEA-708 (EIA-708, first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt, scc, smpt, srt, ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain, and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages. withCaptions public JobOutput withCaptions(Captions captions) You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608, first non-empty channel only), CEA-708 (EIA-708, first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt, scc, smpt, srt, ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain, and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages. Parameters: captions - You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions: Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file. Valid input values include: CEA-608 (EIA-608, first non-empty channel only), CEA-708 (EIA-708, first non-empty channel only), and mov-text Valid outputs include: mov-text Elastic Transcoder supports a maximum of one embedded format per output. Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file. Valid input values include: dfxp (first div element only), ebu-tt, scc, smpt, srt, ttml (first div element only), and webvtt Valid outputs include: dfxp (first div element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible captions, specify dfxp as your output format. Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process. To remove captions or leave the captions empty, set Captions to null. To pass through existing captions unchanged, set the MergePolicy to MergeRetain, and pass in a null CaptionSources array. For more information on embedded files, see the Subtitles Wikipedia page. For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages. Returns: Returns a reference to this object so that method calls can be chained together. setEncryption public void setEncryption(Encryption encryption) The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If you choose to use encryption, you must specify a mode to use. If you choose not to use encryption, Elastic Transcoder will write an unencrypted file to your Amazon S3 bucket. Parameters: encryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If you choose to use encryption, you must specify a mode to use. If you choose not to use encryption, Elastic Transcoder will write an unencrypted file to your Amazon S3 bucket. getEncryption public Encryption getEncryption() The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If you choose to use encryption, you must specify a mode to use. If you choose not to use encryption, Elastic Transcoder will write an unencrypted file to your Amazon S3 bucket. Returns: The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If you choose to use encryption, you must specify a mode to use. If you choose not to use encryption, Elastic Transcoder will write an unencrypted file to your Amazon S3 bucket. withEncryption public JobOutput withEncryption(Encryption encryption) The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If you choose to use encryption, you must specify a mode to use. If you choose not to use encryption, Elastic Transcoder will write an unencrypted file to your Amazon S3 bucket. Parameters: encryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If you choose to use encryption, you must specify a mode to use. If you choose not to use encryption, Elastic Transcoder will write an unencrypted file to your Amazon S3 bucket. Returns: Returns a reference to this object so that method calls can be chained together. setAppliedColorSpaceConversion public void setAppliedColorSpaceConversion(String appliedColorSpaceConversion) If Elastic Transcoder used a preset with a ColorSpaceConversionMode to transcode the output file, the AppliedColorSpaceConversion parameter shows the conversion used. If no ColorSpaceConversionMode was defined in the preset, this parameter will not be included in the job response. Parameters: appliedColorSpaceConversion - If Elastic Transcoder used a preset with a ColorSpaceConversionMode to transcode the output file, the AppliedColorSpaceConversion parameter shows the conversion used. If no ColorSpaceConversionMode was defined in the preset, this parameter will not be included in the job response. getAppliedColorSpaceConversion public String getAppliedColorSpaceConversion() If Elastic Transcoder used a preset with a ColorSpaceConversionMode to transcode the output file, the AppliedColorSpaceConversion parameter shows the conversion used. If no ColorSpaceConversionMode was defined in the preset, this parameter will not be included in the job response. Returns: If Elastic Transcoder used a preset with a ColorSpaceConversionMode to transcode the output file, the AppliedColorSpaceConversion parameter shows the conversion used. If no ColorSpaceConversionMode was defined in the preset, this parameter will not be included in the job response. withAppliedColorSpaceConversion public JobOutput withAppliedColorSpaceConversion(String appliedColorSpaceConversion) If Elastic Transcoder used a preset with a ColorSpaceConversionMode to transcode the output file, the AppliedColorSpaceConversion parameter shows the conversion used. If no ColorSpaceConversionMode was defined in the preset, this parameter will not be included in the job response. Parameters: appliedColorSpaceConversion - If Elastic Transcoder used a preset with a ColorSpaceConversionMode to transcode the output file, the AppliedColorSpaceConversion parameter shows the conversion used. If no ColorSpaceConversionMode was defined in the preset, this parameter will not be included in the job response. Returns: Returns a reference to this object so that method calls can be chained together. toString public String toString() Returns a string representation of this object; useful for testing and debugging. Overrides: toString in class Object Returns: A string representation of this object. See Also: Object.toString() equals public boolean equals(Object obj) Overrides: equals in class Object hashCode public int hashCode() Overrides: hashCode in class Object clone public JobOutput clone() Overrides: clone in class Object

Did this page help you?

Class JobOutput

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

JobOutput

Method Detail

setId

getId

withId

setKey

getKey

withKey

setThumbnailPattern

getThumbnailPattern

withThumbnailPattern

setThumbnailEncryption

getThumbnailEncryption

withThumbnailEncryption

setRotate

getRotate

withRotate

setPresetId

getPresetId

withPresetId

setSegmentDuration

getSegmentDuration

withSegmentDuration

setStatus

getStatus

withStatus

setStatusDetail

getStatusDetail

withStatusDetail

setDuration

getDuration

withDuration

setWidth

getWidth

withWidth

setHeight

getHeight

withHeight

setFrameRate

getFrameRate

withFrameRate

setFileSize

getFileSize

withFileSize

setDurationMillis

getDurationMillis

withDurationMillis

getWatermarks

setWatermarks

withWatermarks

withWatermarks

setAlbumArt

getAlbumArt

withAlbumArt

getComposition

setComposition

withComposition

withComposition

setCaptions

getCaptions

withCaptions

setEncryption

getEncryption

withEncryption

setAppliedColorSpaceConversion

getAppliedColorSpaceConversion

withAppliedColorSpaceConversion

toString

equals

hashCode

clone