public interface AmazonSimpleEmailServiceAsync extends AmazonSimpleEmailService
AsyncHandler can be used to receive
notification when an asynchronous operation completes.
Note: Do not directly implement this interface, new methods are added to it regularly. Extend from
AbstractAmazonSimpleEmailServiceAsync instead.
This is the API Reference for Amazon Simple Email Service (Amazon SES). This documentation is intended to be used in conjunction with the Amazon SES Developer Guide.
For a list of Amazon SES endpoints to use in service requests, see Regions and Amazon SES in the Amazon SES Developer Guide.
ENDPOINT_PREFIXcloneReceiptRuleSet, createConfigurationSet, createConfigurationSetEventDestination, createReceiptFilter, createReceiptRule, createReceiptRuleSet, deleteConfigurationSet, deleteConfigurationSetEventDestination, deleteIdentity, deleteIdentityPolicy, deleteReceiptFilter, deleteReceiptRule, deleteReceiptRuleSet, deleteVerifiedEmailAddress, describeActiveReceiptRuleSet, describeConfigurationSet, describeReceiptRule, describeReceiptRuleSet, getCachedResponseMetadata, getIdentityDkimAttributes, getIdentityMailFromDomainAttributes, getIdentityNotificationAttributes, getIdentityPolicies, getIdentityVerificationAttributes, getSendQuota, getSendQuota, getSendStatistics, getSendStatistics, listConfigurationSets, listIdentities, listIdentities, listIdentityPolicies, listReceiptFilters, listReceiptRuleSets, listVerifiedEmailAddresses, listVerifiedEmailAddresses, putIdentityPolicy, reorderReceiptRuleSet, sendBounce, sendEmail, sendRawEmail, setActiveReceiptRuleSet, setEndpoint, setIdentityDkimEnabled, setIdentityFeedbackForwardingEnabled, setIdentityHeadersInNotificationsEnabled, setIdentityMailFromDomain, setIdentityNotificationTopic, setReceiptRulePosition, setRegion, shutdown, updateConfigurationSetEventDestination, updateReceiptRule, verifyDomainDkim, verifyDomainIdentity, verifyEmailAddress, verifyEmailIdentity, waitersFuture<CloneReceiptRuleSetResult> cloneReceiptRuleSetAsync(CloneReceiptRuleSetRequest cloneReceiptRuleSetRequest)
Creates a receipt rule set by cloning an existing one. All receipt rules and configurations are copied to the new receipt rule set and are completely independent of the source rule set.
For information about setting up rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
cloneReceiptRuleSetRequest - Represents a request to create a receipt rule set by cloning an existing one. You use receipt rule sets to
receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<CloneReceiptRuleSetResult> cloneReceiptRuleSetAsync(CloneReceiptRuleSetRequest cloneReceiptRuleSetRequest, AsyncHandler<CloneReceiptRuleSetRequest,CloneReceiptRuleSetResult> asyncHandler)
Creates a receipt rule set by cloning an existing one. All receipt rules and configurations are copied to the new receipt rule set and are completely independent of the source rule set.
For information about setting up rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
cloneReceiptRuleSetRequest - Represents a request to create a receipt rule set by cloning an existing one. You use receipt rule sets to
receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<CreateConfigurationSetResult> createConfigurationSetAsync(CreateConfigurationSetRequest createConfigurationSetRequest)
Creates a configuration set.
Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
createConfigurationSetRequest - Represents a request to create a configuration set. Configuration sets enable you to publish email sending
events. For information about using configuration sets, see the Amazon SES
Developer Guide.Future<CreateConfigurationSetResult> createConfigurationSetAsync(CreateConfigurationSetRequest createConfigurationSetRequest, AsyncHandler<CreateConfigurationSetRequest,CreateConfigurationSetResult> asyncHandler)
Creates a configuration set.
Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
createConfigurationSetRequest - Represents a request to create a configuration set. Configuration sets enable you to publish email sending
events. For information about using configuration sets, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<CreateConfigurationSetEventDestinationResult> createConfigurationSetEventDestinationAsync(CreateConfigurationSetEventDestinationRequest createConfigurationSetEventDestinationRequest)
Creates a configuration set event destination.
When you create or update an event destination, you must provide one, and only one, destination. The destination can be either Amazon CloudWatch or Amazon Kinesis Firehose.
An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
createConfigurationSetEventDestinationRequest - Represents a request to create a configuration set event destination. A configuration set event
destination, which can be either Amazon CloudWatch or Amazon Kinesis Firehose, describes an AWS service in
which Amazon SES publishes the email sending events associated with a configuration set. For information
about using configuration sets, see the Amazon SES
Developer Guide.Future<CreateConfigurationSetEventDestinationResult> createConfigurationSetEventDestinationAsync(CreateConfigurationSetEventDestinationRequest createConfigurationSetEventDestinationRequest, AsyncHandler<CreateConfigurationSetEventDestinationRequest,CreateConfigurationSetEventDestinationResult> asyncHandler)
Creates a configuration set event destination.
When you create or update an event destination, you must provide one, and only one, destination. The destination can be either Amazon CloudWatch or Amazon Kinesis Firehose.
An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
createConfigurationSetEventDestinationRequest - Represents a request to create a configuration set event destination. A configuration set event
destination, which can be either Amazon CloudWatch or Amazon Kinesis Firehose, describes an AWS service in
which Amazon SES publishes the email sending events associated with a configuration set. For information
about using configuration sets, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<CreateReceiptFilterResult> createReceiptFilterAsync(CreateReceiptFilterRequest createReceiptFilterRequest)
Creates a new IP address filter.
For information about setting up IP address filters, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
createReceiptFilterRequest - Represents a request to create a new IP address filter. You use IP address filters when you receive email
with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<CreateReceiptFilterResult> createReceiptFilterAsync(CreateReceiptFilterRequest createReceiptFilterRequest, AsyncHandler<CreateReceiptFilterRequest,CreateReceiptFilterResult> asyncHandler)
Creates a new IP address filter.
For information about setting up IP address filters, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
createReceiptFilterRequest - Represents a request to create a new IP address filter. You use IP address filters when you receive email
with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<CreateReceiptRuleResult> createReceiptRuleAsync(CreateReceiptRuleRequest createReceiptRuleRequest)
Creates a receipt rule.
For information about setting up receipt rules, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
createReceiptRuleRequest - Represents a request to create a receipt rule. You use receipt rules to receive email with Amazon SES. For
more information, see the Amazon SES
Developer Guide.Future<CreateReceiptRuleResult> createReceiptRuleAsync(CreateReceiptRuleRequest createReceiptRuleRequest, AsyncHandler<CreateReceiptRuleRequest,CreateReceiptRuleResult> asyncHandler)
Creates a receipt rule.
For information about setting up receipt rules, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
createReceiptRuleRequest - Represents a request to create a receipt rule. You use receipt rules to receive email with Amazon SES. For
more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<CreateReceiptRuleSetResult> createReceiptRuleSetAsync(CreateReceiptRuleSetRequest createReceiptRuleSetRequest)
Creates an empty receipt rule set.
For information about setting up receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
createReceiptRuleSetRequest - Represents a request to create an empty receipt rule set. You use receipt rule sets to receive email with
Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<CreateReceiptRuleSetResult> createReceiptRuleSetAsync(CreateReceiptRuleSetRequest createReceiptRuleSetRequest, AsyncHandler<CreateReceiptRuleSetRequest,CreateReceiptRuleSetResult> asyncHandler)
Creates an empty receipt rule set.
For information about setting up receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
createReceiptRuleSetRequest - Represents a request to create an empty receipt rule set. You use receipt rule sets to receive email with
Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DeleteConfigurationSetResult> deleteConfigurationSetAsync(DeleteConfigurationSetRequest deleteConfigurationSetRequest)
Deletes a configuration set.
Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteConfigurationSetRequest - Represents a request to delete a configuration set. Configuration sets enable you to publish email sending
events. For information about using configuration sets, see the Amazon SES
Developer Guide.Future<DeleteConfigurationSetResult> deleteConfigurationSetAsync(DeleteConfigurationSetRequest deleteConfigurationSetRequest, AsyncHandler<DeleteConfigurationSetRequest,DeleteConfigurationSetResult> asyncHandler)
Deletes a configuration set.
Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteConfigurationSetRequest - Represents a request to delete a configuration set. Configuration sets enable you to publish email sending
events. For information about using configuration sets, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DeleteConfigurationSetEventDestinationResult> deleteConfigurationSetEventDestinationAsync(DeleteConfigurationSetEventDestinationRequest deleteConfigurationSetEventDestinationRequest)
Deletes a configuration set event destination.
Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteConfigurationSetEventDestinationRequest - Represents a request to delete a configuration set event destination. Configuration set event destinations
are associated with configuration sets, which enable you to publish email sending events. For information
about using configuration sets, see the Amazon SES
Developer Guide.Future<DeleteConfigurationSetEventDestinationResult> deleteConfigurationSetEventDestinationAsync(DeleteConfigurationSetEventDestinationRequest deleteConfigurationSetEventDestinationRequest, AsyncHandler<DeleteConfigurationSetEventDestinationRequest,DeleteConfigurationSetEventDestinationResult> asyncHandler)
Deletes a configuration set event destination.
Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteConfigurationSetEventDestinationRequest - Represents a request to delete a configuration set event destination. Configuration set event destinations
are associated with configuration sets, which enable you to publish email sending events. For information
about using configuration sets, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DeleteIdentityResult> deleteIdentityAsync(DeleteIdentityRequest deleteIdentityRequest)
Deletes the specified identity (an email address or a domain) from the list of verified identities.
This action is throttled at one request per second.
deleteIdentityRequest - Represents a request to delete one of your Amazon SES identities (an email address or domain).Future<DeleteIdentityResult> deleteIdentityAsync(DeleteIdentityRequest deleteIdentityRequest, AsyncHandler<DeleteIdentityRequest,DeleteIdentityResult> asyncHandler)
Deletes the specified identity (an email address or a domain) from the list of verified identities.
This action is throttled at one request per second.
deleteIdentityRequest - Represents a request to delete one of your Amazon SES identities (an email address or domain).asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DeleteIdentityPolicyResult> deleteIdentityPolicyAsync(DeleteIdentityPolicyRequest deleteIdentityPolicyRequest)
Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.
This API is for the identity owner only. If you have not verified the identity, this API will return an error.
Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteIdentityPolicyRequest - Represents a request to delete a sending authorization policy for an identity. Sending authorization is an
Amazon SES feature that enables you to authorize other senders to use your identities. For information,
see the Amazon
SES Developer Guide.Future<DeleteIdentityPolicyResult> deleteIdentityPolicyAsync(DeleteIdentityPolicyRequest deleteIdentityPolicyRequest, AsyncHandler<DeleteIdentityPolicyRequest,DeleteIdentityPolicyResult> asyncHandler)
Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.
This API is for the identity owner only. If you have not verified the identity, this API will return an error.
Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteIdentityPolicyRequest - Represents a request to delete a sending authorization policy for an identity. Sending authorization is an
Amazon SES feature that enables you to authorize other senders to use your identities. For information,
see the Amazon
SES Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DeleteReceiptFilterResult> deleteReceiptFilterAsync(DeleteReceiptFilterRequest deleteReceiptFilterRequest)
Deletes the specified IP address filter.
For information about managing IP address filters, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteReceiptFilterRequest - Represents a request to delete an IP address filter. You use IP address filters when you receive email
with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<DeleteReceiptFilterResult> deleteReceiptFilterAsync(DeleteReceiptFilterRequest deleteReceiptFilterRequest, AsyncHandler<DeleteReceiptFilterRequest,DeleteReceiptFilterResult> asyncHandler)
Deletes the specified IP address filter.
For information about managing IP address filters, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteReceiptFilterRequest - Represents a request to delete an IP address filter. You use IP address filters when you receive email
with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DeleteReceiptRuleResult> deleteReceiptRuleAsync(DeleteReceiptRuleRequest deleteReceiptRuleRequest)
Deletes the specified receipt rule.
For information about managing receipt rules, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteReceiptRuleRequest - Represents a request to delete a receipt rule. You use receipt rules to receive email with Amazon SES. For
more information, see the Amazon SES
Developer Guide.Future<DeleteReceiptRuleResult> deleteReceiptRuleAsync(DeleteReceiptRuleRequest deleteReceiptRuleRequest, AsyncHandler<DeleteReceiptRuleRequest,DeleteReceiptRuleResult> asyncHandler)
Deletes the specified receipt rule.
For information about managing receipt rules, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteReceiptRuleRequest - Represents a request to delete a receipt rule. You use receipt rules to receive email with Amazon SES. For
more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DeleteReceiptRuleSetResult> deleteReceiptRuleSetAsync(DeleteReceiptRuleSetRequest deleteReceiptRuleSetRequest)
Deletes the specified receipt rule set and all of the receipt rules it contains.
The currently active rule set cannot be deleted.
For information about managing receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteReceiptRuleSetRequest - Represents a request to delete a receipt rule set and all of the receipt rules it contains. You use
receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<DeleteReceiptRuleSetResult> deleteReceiptRuleSetAsync(DeleteReceiptRuleSetRequest deleteReceiptRuleSetRequest, AsyncHandler<DeleteReceiptRuleSetRequest,DeleteReceiptRuleSetResult> asyncHandler)
Deletes the specified receipt rule set and all of the receipt rules it contains.
The currently active rule set cannot be deleted.
For information about managing receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
deleteReceiptRuleSetRequest - Represents a request to delete a receipt rule set and all of the receipt rules it contains. You use
receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DeleteVerifiedEmailAddressResult> deleteVerifiedEmailAddressAsync(DeleteVerifiedEmailAddressRequest deleteVerifiedEmailAddressRequest)
Deletes the specified email address from the list of verified addresses.
The DeleteVerifiedEmailAddress action is deprecated as of the May 15, 2012 release of Domain Verification. The DeleteIdentity action is now preferred.
This action is throttled at one request per second.
deleteVerifiedEmailAddressRequest - Represents a request to delete an email address from the list of email addresses you have attempted to
verify under your AWS account.Future<DeleteVerifiedEmailAddressResult> deleteVerifiedEmailAddressAsync(DeleteVerifiedEmailAddressRequest deleteVerifiedEmailAddressRequest, AsyncHandler<DeleteVerifiedEmailAddressRequest,DeleteVerifiedEmailAddressResult> asyncHandler)
Deletes the specified email address from the list of verified addresses.
The DeleteVerifiedEmailAddress action is deprecated as of the May 15, 2012 release of Domain Verification. The DeleteIdentity action is now preferred.
This action is throttled at one request per second.
deleteVerifiedEmailAddressRequest - Represents a request to delete an email address from the list of email addresses you have attempted to
verify under your AWS account.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DescribeActiveReceiptRuleSetResult> describeActiveReceiptRuleSetAsync(DescribeActiveReceiptRuleSetRequest describeActiveReceiptRuleSetRequest)
Returns the metadata and receipt rules for the receipt rule set that is currently active.
For information about setting up receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
describeActiveReceiptRuleSetRequest - Represents a request to return the metadata and receipt rules for the receipt rule set that is currently
active. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<DescribeActiveReceiptRuleSetResult> describeActiveReceiptRuleSetAsync(DescribeActiveReceiptRuleSetRequest describeActiveReceiptRuleSetRequest, AsyncHandler<DescribeActiveReceiptRuleSetRequest,DescribeActiveReceiptRuleSetResult> asyncHandler)
Returns the metadata and receipt rules for the receipt rule set that is currently active.
For information about setting up receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
describeActiveReceiptRuleSetRequest - Represents a request to return the metadata and receipt rules for the receipt rule set that is currently
active. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DescribeConfigurationSetResult> describeConfigurationSetAsync(DescribeConfigurationSetRequest describeConfigurationSetRequest)
Returns the details of the specified configuration set.
Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
describeConfigurationSetRequest - Represents a request to return the details of a configuration set. Configuration sets enable you to
publish email sending events. For information about using configuration sets, see the Amazon SES
Developer Guide.Future<DescribeConfigurationSetResult> describeConfigurationSetAsync(DescribeConfigurationSetRequest describeConfigurationSetRequest, AsyncHandler<DescribeConfigurationSetRequest,DescribeConfigurationSetResult> asyncHandler)
Returns the details of the specified configuration set.
Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
describeConfigurationSetRequest - Represents a request to return the details of a configuration set. Configuration sets enable you to
publish email sending events. For information about using configuration sets, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DescribeReceiptRuleResult> describeReceiptRuleAsync(DescribeReceiptRuleRequest describeReceiptRuleRequest)
Returns the details of the specified receipt rule.
For information about setting up receipt rules, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
describeReceiptRuleRequest - Represents a request to return the details of a receipt rule. You use receipt rules to receive email with
Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<DescribeReceiptRuleResult> describeReceiptRuleAsync(DescribeReceiptRuleRequest describeReceiptRuleRequest, AsyncHandler<DescribeReceiptRuleRequest,DescribeReceiptRuleResult> asyncHandler)
Returns the details of the specified receipt rule.
For information about setting up receipt rules, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
describeReceiptRuleRequest - Represents a request to return the details of a receipt rule. You use receipt rules to receive email with
Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<DescribeReceiptRuleSetResult> describeReceiptRuleSetAsync(DescribeReceiptRuleSetRequest describeReceiptRuleSetRequest)
Returns the details of the specified receipt rule set.
For information about managing receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
describeReceiptRuleSetRequest - Represents a request to return the details of a receipt rule set. You use receipt rule sets to receive
email with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<DescribeReceiptRuleSetResult> describeReceiptRuleSetAsync(DescribeReceiptRuleSetRequest describeReceiptRuleSetRequest, AsyncHandler<DescribeReceiptRuleSetRequest,DescribeReceiptRuleSetResult> asyncHandler)
Returns the details of the specified receipt rule set.
For information about managing receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
describeReceiptRuleSetRequest - Represents a request to return the details of a receipt rule set. You use receipt rule sets to receive
email with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<GetIdentityDkimAttributesResult> getIdentityDkimAttributesAsync(GetIdentityDkimAttributesRequest getIdentityDkimAttributesRequest)
Returns the current status of Easy DKIM signing for an entity. For domain name identities, this action also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES has successfully verified that these tokens have been published.
This action takes a list of identities as input and returns the following information for each:
Whether Easy DKIM signing is enabled or disabled.
A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.
Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.
This action is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time.
For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.
getIdentityDkimAttributesRequest - Represents a request for the status of Amazon SES Easy DKIM signing for an identity. For domain
identities, this request also returns the DKIM tokens that are required for Easy DKIM signing, and whether
Amazon SES successfully verified that these tokens were published. For more information about Easy DKIM,
see the Amazon SES Developer
Guide.Future<GetIdentityDkimAttributesResult> getIdentityDkimAttributesAsync(GetIdentityDkimAttributesRequest getIdentityDkimAttributesRequest, AsyncHandler<GetIdentityDkimAttributesRequest,GetIdentityDkimAttributesResult> asyncHandler)
Returns the current status of Easy DKIM signing for an entity. For domain name identities, this action also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES has successfully verified that these tokens have been published.
This action takes a list of identities as input and returns the following information for each:
Whether Easy DKIM signing is enabled or disabled.
A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.
Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.
This action is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time.
For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.
getIdentityDkimAttributesRequest - Represents a request for the status of Amazon SES Easy DKIM signing for an identity. For domain
identities, this request also returns the DKIM tokens that are required for Easy DKIM signing, and whether
Amazon SES successfully verified that these tokens were published. For more information about Easy DKIM,
see the Amazon SES Developer
Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<GetIdentityMailFromDomainAttributesResult> getIdentityMailFromDomainAttributesAsync(GetIdentityMailFromDomainAttributesRequest getIdentityMailFromDomainAttributesRequest)
Returns the custom MAIL FROM attributes for a list of identities (email addresses and/or domains).
This action is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.
getIdentityMailFromDomainAttributesRequest - Represents a request to return the Amazon SES custom MAIL FROM attributes for a list of identities. For
information about using a custom MAIL FROM domain, see the Amazon SES Developer Guide.Future<GetIdentityMailFromDomainAttributesResult> getIdentityMailFromDomainAttributesAsync(GetIdentityMailFromDomainAttributesRequest getIdentityMailFromDomainAttributesRequest, AsyncHandler<GetIdentityMailFromDomainAttributesRequest,GetIdentityMailFromDomainAttributesResult> asyncHandler)
Returns the custom MAIL FROM attributes for a list of identities (email addresses and/or domains).
This action is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.
getIdentityMailFromDomainAttributesRequest - Represents a request to return the Amazon SES custom MAIL FROM attributes for a list of identities. For
information about using a custom MAIL FROM domain, see the Amazon SES Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<GetIdentityNotificationAttributesResult> getIdentityNotificationAttributesAsync(GetIdentityNotificationAttributesRequest getIdentityNotificationAttributesRequest)
Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes.
This action is throttled at one request per second and can only get notification attributes for up to 100 identities at a time.
For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.
getIdentityNotificationAttributesRequest - Represents a request to return the notification attributes for a list of identities you verified with
Amazon SES. For information about Amazon SES notifications, see the Amazon SES Developer
Guide.Future<GetIdentityNotificationAttributesResult> getIdentityNotificationAttributesAsync(GetIdentityNotificationAttributesRequest getIdentityNotificationAttributesRequest, AsyncHandler<GetIdentityNotificationAttributesRequest,GetIdentityNotificationAttributesResult> asyncHandler)
Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes.
This action is throttled at one request per second and can only get notification attributes for up to 100 identities at a time.
For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.
getIdentityNotificationAttributesRequest - Represents a request to return the notification attributes for a list of identities you verified with
Amazon SES. For information about Amazon SES notifications, see the Amazon SES Developer
Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<GetIdentityPoliciesResult> getIdentityPoliciesAsync(GetIdentityPoliciesRequest getIdentityPoliciesRequest)
Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.
This API is for the identity owner only. If you have not verified the identity, this API will return an error.
Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
getIdentityPoliciesRequest - Represents a request to return the requested sending authorization policies for an identity. Sending
authorization is an Amazon SES feature that enables you to authorize other senders to use your identities.
For information, see the Amazon SES
Developer Guide.Future<GetIdentityPoliciesResult> getIdentityPoliciesAsync(GetIdentityPoliciesRequest getIdentityPoliciesRequest, AsyncHandler<GetIdentityPoliciesRequest,GetIdentityPoliciesResult> asyncHandler)
Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.
This API is for the identity owner only. If you have not verified the identity, this API will return an error.
Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
getIdentityPoliciesRequest - Represents a request to return the requested sending authorization policies for an identity. Sending
authorization is an Amazon SES feature that enables you to authorize other senders to use your identities.
For information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<GetIdentityVerificationAttributesResult> getIdentityVerificationAttributesAsync(GetIdentityVerificationAttributesRequest getIdentityVerificationAttributesRequest)
Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity.
This action is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.
getIdentityVerificationAttributesRequest - Represents a request to return the Amazon SES verification status of a list of identities. For domain
identities, this request also returns the verification token. For information about verifying identities
with Amazon SES, see the Amazon SES
Developer Guide.Future<GetIdentityVerificationAttributesResult> getIdentityVerificationAttributesAsync(GetIdentityVerificationAttributesRequest getIdentityVerificationAttributesRequest, AsyncHandler<GetIdentityVerificationAttributesRequest,GetIdentityVerificationAttributesResult> asyncHandler)
Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity.
This action is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.
getIdentityVerificationAttributesRequest - Represents a request to return the Amazon SES verification status of a list of identities. For domain
identities, this request also returns the verification token. For information about verifying identities
with Amazon SES, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<GetSendQuotaResult> getSendQuotaAsync(GetSendQuotaRequest getSendQuotaRequest)
Returns the user's current sending limits.
This action is throttled at one request per second.
getSendQuotaRequest - Future<GetSendQuotaResult> getSendQuotaAsync(GetSendQuotaRequest getSendQuotaRequest, AsyncHandler<GetSendQuotaRequest,GetSendQuotaResult> asyncHandler)
Returns the user's current sending limits.
This action is throttled at one request per second.
getSendQuotaRequest - asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<GetSendQuotaResult> getSendQuotaAsync()
getSendQuotaAsync(GetSendQuotaRequest)Future<GetSendQuotaResult> getSendQuotaAsync(AsyncHandler<GetSendQuotaRequest,GetSendQuotaResult> asyncHandler)
Future<GetSendStatisticsResult> getSendStatisticsAsync(GetSendStatisticsRequest getSendStatisticsRequest)
Returns the user's sending statistics. The result is a list of data points, representing the last two weeks of sending activity.
Each data point in the list contains statistics for a 15-minute interval.
This action is throttled at one request per second.
getSendStatisticsRequest - Future<GetSendStatisticsResult> getSendStatisticsAsync(GetSendStatisticsRequest getSendStatisticsRequest, AsyncHandler<GetSendStatisticsRequest,GetSendStatisticsResult> asyncHandler)
Returns the user's sending statistics. The result is a list of data points, representing the last two weeks of sending activity.
Each data point in the list contains statistics for a 15-minute interval.
This action is throttled at one request per second.
getSendStatisticsRequest - asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<GetSendStatisticsResult> getSendStatisticsAsync()
Future<GetSendStatisticsResult> getSendStatisticsAsync(AsyncHandler<GetSendStatisticsRequest,GetSendStatisticsResult> asyncHandler)
Future<ListConfigurationSetsResult> listConfigurationSetsAsync(ListConfigurationSetsRequest listConfigurationSetsRequest)
Lists the configuration sets associated with your AWS account.
Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second and can return up to 50 configuration sets at a time.
listConfigurationSetsRequest - Represents a request to list the configuration sets associated with your AWS account. Configuration sets
enable you to publish email sending events. For information about using configuration sets, see the Amazon SES
Developer Guide.Future<ListConfigurationSetsResult> listConfigurationSetsAsync(ListConfigurationSetsRequest listConfigurationSetsRequest, AsyncHandler<ListConfigurationSetsRequest,ListConfigurationSetsResult> asyncHandler)
Lists the configuration sets associated with your AWS account.
Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second and can return up to 50 configuration sets at a time.
listConfigurationSetsRequest - Represents a request to list the configuration sets associated with your AWS account. Configuration sets
enable you to publish email sending events. For information about using configuration sets, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<ListIdentitiesResult> listIdentitiesAsync(ListIdentitiesRequest listIdentitiesRequest)
Returns a list containing all of the identities (email addresses and domains) for your AWS account, regardless of verification status.
This action is throttled at one request per second.
listIdentitiesRequest - Represents a request to return a list of all identities (email addresses and domains) that you have
attempted to verify under your AWS account, regardless of verification status.Future<ListIdentitiesResult> listIdentitiesAsync(ListIdentitiesRequest listIdentitiesRequest, AsyncHandler<ListIdentitiesRequest,ListIdentitiesResult> asyncHandler)
Returns a list containing all of the identities (email addresses and domains) for your AWS account, regardless of verification status.
This action is throttled at one request per second.
listIdentitiesRequest - Represents a request to return a list of all identities (email addresses and domains) that you have
attempted to verify under your AWS account, regardless of verification status.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<ListIdentitiesResult> listIdentitiesAsync()
Future<ListIdentitiesResult> listIdentitiesAsync(AsyncHandler<ListIdentitiesRequest,ListIdentitiesResult> asyncHandler)
Future<ListIdentityPoliciesResult> listIdentityPoliciesAsync(ListIdentityPoliciesRequest listIdentityPoliciesRequest)
Returns a list of sending authorization policies that are attached to the given identity (an email address or a
domain). This API returns only a list. If you want the actual policy content, you can use
GetIdentityPolicies.
This API is for the identity owner only. If you have not verified the identity, this API will return an error.
Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
listIdentityPoliciesRequest - Represents a request to return a list of sending authorization policies that are attached to an identity.
Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your
identities. For information, see the Amazon SES
Developer Guide.Future<ListIdentityPoliciesResult> listIdentityPoliciesAsync(ListIdentityPoliciesRequest listIdentityPoliciesRequest, AsyncHandler<ListIdentityPoliciesRequest,ListIdentityPoliciesResult> asyncHandler)
Returns a list of sending authorization policies that are attached to the given identity (an email address or a
domain). This API returns only a list. If you want the actual policy content, you can use
GetIdentityPolicies.
This API is for the identity owner only. If you have not verified the identity, this API will return an error.
Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
listIdentityPoliciesRequest - Represents a request to return a list of sending authorization policies that are attached to an identity.
Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your
identities. For information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<ListReceiptFiltersResult> listReceiptFiltersAsync(ListReceiptFiltersRequest listReceiptFiltersRequest)
Lists the IP address filters associated with your AWS account.
For information about managing IP address filters, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
listReceiptFiltersRequest - Represents a request to list the IP address filters that exist under your AWS account. You use IP address
filters when you receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<ListReceiptFiltersResult> listReceiptFiltersAsync(ListReceiptFiltersRequest listReceiptFiltersRequest, AsyncHandler<ListReceiptFiltersRequest,ListReceiptFiltersResult> asyncHandler)
Lists the IP address filters associated with your AWS account.
For information about managing IP address filters, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
listReceiptFiltersRequest - Represents a request to list the IP address filters that exist under your AWS account. You use IP address
filters when you receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<ListReceiptRuleSetsResult> listReceiptRuleSetsAsync(ListReceiptRuleSetsRequest listReceiptRuleSetsRequest)
Lists the receipt rule sets that exist under your AWS account. If there are additional receipt rule sets to be
retrieved, you will receive a NextToken that you can provide to the next call to
ListReceiptRuleSets to retrieve the additional entries.
For information about managing receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
listReceiptRuleSetsRequest - Represents a request to list the receipt rule sets that exist under your AWS account. You use receipt rule
sets to receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<ListReceiptRuleSetsResult> listReceiptRuleSetsAsync(ListReceiptRuleSetsRequest listReceiptRuleSetsRequest, AsyncHandler<ListReceiptRuleSetsRequest,ListReceiptRuleSetsResult> asyncHandler)
Lists the receipt rule sets that exist under your AWS account. If there are additional receipt rule sets to be
retrieved, you will receive a NextToken that you can provide to the next call to
ListReceiptRuleSets to retrieve the additional entries.
For information about managing receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
listReceiptRuleSetsRequest - Represents a request to list the receipt rule sets that exist under your AWS account. You use receipt rule
sets to receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<ListVerifiedEmailAddressesResult> listVerifiedEmailAddressesAsync(ListVerifiedEmailAddressesRequest listVerifiedEmailAddressesRequest)
Returns a list containing all of the email addresses that have been verified.
The ListVerifiedEmailAddresses action is deprecated as of the May 15, 2012 release of Domain Verification. The ListIdentities action is now preferred.
This action is throttled at one request per second.
listVerifiedEmailAddressesRequest - Future<ListVerifiedEmailAddressesResult> listVerifiedEmailAddressesAsync(ListVerifiedEmailAddressesRequest listVerifiedEmailAddressesRequest, AsyncHandler<ListVerifiedEmailAddressesRequest,ListVerifiedEmailAddressesResult> asyncHandler)
Returns a list containing all of the email addresses that have been verified.
The ListVerifiedEmailAddresses action is deprecated as of the May 15, 2012 release of Domain Verification. The ListIdentities action is now preferred.
This action is throttled at one request per second.
listVerifiedEmailAddressesRequest - asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<ListVerifiedEmailAddressesResult> listVerifiedEmailAddressesAsync()
Future<ListVerifiedEmailAddressesResult> listVerifiedEmailAddressesAsync(AsyncHandler<ListVerifiedEmailAddressesRequest,ListVerifiedEmailAddressesResult> asyncHandler)
Future<PutIdentityPolicyResult> putIdentityPolicyAsync(PutIdentityPolicyRequest putIdentityPolicyRequest)
Adds or updates a sending authorization policy for the specified identity (an email address or a domain).
This API is for the identity owner only. If you have not verified the identity, this API will return an error.
Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
putIdentityPolicyRequest - Represents a request to add or update a sending authorization policy for an identity. Sending
authorization is an Amazon SES feature that enables you to authorize other senders to use your identities.
For information, see the Amazon SES
Developer Guide.Future<PutIdentityPolicyResult> putIdentityPolicyAsync(PutIdentityPolicyRequest putIdentityPolicyRequest, AsyncHandler<PutIdentityPolicyRequest,PutIdentityPolicyResult> asyncHandler)
Adds or updates a sending authorization policy for the specified identity (an email address or a domain).
This API is for the identity owner only. If you have not verified the identity, this API will return an error.
Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
putIdentityPolicyRequest - Represents a request to add or update a sending authorization policy for an identity. Sending
authorization is an Amazon SES feature that enables you to authorize other senders to use your identities.
For information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<ReorderReceiptRuleSetResult> reorderReceiptRuleSetAsync(ReorderReceiptRuleSetRequest reorderReceiptRuleSetRequest)
Reorders the receipt rules within a receipt rule set.
All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules.
For information about managing receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
reorderReceiptRuleSetRequest - Represents a request to reorder the receipt rules within a receipt rule set. You use receipt rule sets to
receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<ReorderReceiptRuleSetResult> reorderReceiptRuleSetAsync(ReorderReceiptRuleSetRequest reorderReceiptRuleSetRequest, AsyncHandler<ReorderReceiptRuleSetRequest,ReorderReceiptRuleSetResult> asyncHandler)
Reorders the receipt rules within a receipt rule set.
All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules.
For information about managing receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
reorderReceiptRuleSetRequest - Represents a request to reorder the receipt rules within a receipt rule set. You use receipt rule sets to
receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<SendBounceResult> sendBounceAsync(SendBounceRequest sendBounceRequest)
Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it.
You cannot use this API to send generic bounces for mail that was not received by Amazon SES.
For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
sendBounceRequest - Represents a request to send a bounce message to the sender of an email you received through Amazon SES.Future<SendBounceResult> sendBounceAsync(SendBounceRequest sendBounceRequest, AsyncHandler<SendBounceRequest,SendBounceResult> asyncHandler)
Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it.
You cannot use this API to send generic bounces for mail that was not received by Amazon SES.
For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
sendBounceRequest - Represents a request to send a bounce message to the sender of an email you received through Amazon SES.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<SendEmailResult> sendEmailAsync(SendEmailRequest sendEmailRequest)
Composes an email message based on input data, and then immediately queues the message for sending.
There are several important points to know about SendEmail:
You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.
The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.
Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.
For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.
sendEmailRequest - Represents a request to send a single formatted email using Amazon SES. For more information, see the Amazon SES Developer
Guide.Future<SendEmailResult> sendEmailAsync(SendEmailRequest sendEmailRequest, AsyncHandler<SendEmailRequest,SendEmailResult> asyncHandler)
Composes an email message based on input data, and then immediately queues the message for sending.
There are several important points to know about SendEmail:
You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.
The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.
Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.
For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.
sendEmailRequest - Represents a request to send a single formatted email using Amazon SES. For more information, see the Amazon SES Developer
Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<SendRawEmailResult> sendRawEmailAsync(SendRawEmailRequest sendRawEmailRequest)
Sends an email message, with header and content specified by the client. The SendRawEmail action is
useful for sending multipart MIME emails. The raw text of the message must comply with Internet email standards;
otherwise, the message cannot be sent.
There are several important points to know about SendRawEmail:
You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.
The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.
Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.
The To:, CC:, and BCC: headers in the raw message can contain a group list. Note that each recipient in a group list counts towards the 50-recipient limit.
Amazon SES overrides any Message-ID and Date headers you provide.
For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.
If you are using sending authorization to send on behalf of another user, SendRawEmail enables you
to specify the cross-account identity for the email's "Source," "From," and "Return-Path" parameters in one of
two ways: you can pass optional parameters SourceArn, FromArn, and/or
ReturnPathArn to the API, or you can include the following X-headers in the header of your raw
email:
X-SES-SOURCE-ARN
X-SES-FROM-ARN
X-SES-RETURN-PATH-ARN
Do not include these X-headers in the DKIM signature, because they are removed by Amazon SES before sending the email.
For the most common sending authorization use case, we recommend that you specify the
SourceIdentityArn and do not specify either the FromIdentityArn or
ReturnPathIdentityArn. (The same note applies to the corresponding X-headers.) If you only specify
the SourceIdentityArn, Amazon SES will simply set the "From" address and the "Return Path" address
to the identity specified in SourceIdentityArn. For more information about sending authorization,
see the Amazon SES
Developer Guide.
sendRawEmailRequest - Represents a request to send a single raw email using Amazon SES. For more information, see the Amazon SES Developer
Guide.Future<SendRawEmailResult> sendRawEmailAsync(SendRawEmailRequest sendRawEmailRequest, AsyncHandler<SendRawEmailRequest,SendRawEmailResult> asyncHandler)
Sends an email message, with header and content specified by the client. The SendRawEmail action is
useful for sending multipart MIME emails. The raw text of the message must comply with Internet email standards;
otherwise, the message cannot be sent.
There are several important points to know about SendRawEmail:
You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.
The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.
Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.
The To:, CC:, and BCC: headers in the raw message can contain a group list. Note that each recipient in a group list counts towards the 50-recipient limit.
Amazon SES overrides any Message-ID and Date headers you provide.
For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.
If you are using sending authorization to send on behalf of another user, SendRawEmail enables you
to specify the cross-account identity for the email's "Source," "From," and "Return-Path" parameters in one of
two ways: you can pass optional parameters SourceArn, FromArn, and/or
ReturnPathArn to the API, or you can include the following X-headers in the header of your raw
email:
X-SES-SOURCE-ARN
X-SES-FROM-ARN
X-SES-RETURN-PATH-ARN
Do not include these X-headers in the DKIM signature, because they are removed by Amazon SES before sending the email.
For the most common sending authorization use case, we recommend that you specify the
SourceIdentityArn and do not specify either the FromIdentityArn or
ReturnPathIdentityArn. (The same note applies to the corresponding X-headers.) If you only specify
the SourceIdentityArn, Amazon SES will simply set the "From" address and the "Return Path" address
to the identity specified in SourceIdentityArn. For more information about sending authorization,
see the Amazon SES
Developer Guide.
sendRawEmailRequest - Represents a request to send a single raw email using Amazon SES. For more information, see the Amazon SES Developer
Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<SetActiveReceiptRuleSetResult> setActiveReceiptRuleSetAsync(SetActiveReceiptRuleSetRequest setActiveReceiptRuleSetRequest)
Sets the specified receipt rule set as the active receipt rule set.
To disable your email-receiving through Amazon SES completely, you can call this API with RuleSetName set to null.
For information about managing receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
setActiveReceiptRuleSetRequest - Represents a request to set a receipt rule set as the active receipt rule set. You use receipt rule sets
to receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<SetActiveReceiptRuleSetResult> setActiveReceiptRuleSetAsync(SetActiveReceiptRuleSetRequest setActiveReceiptRuleSetRequest, AsyncHandler<SetActiveReceiptRuleSetRequest,SetActiveReceiptRuleSetResult> asyncHandler)
Sets the specified receipt rule set as the active receipt rule set.
To disable your email-receiving through Amazon SES completely, you can call this API with RuleSetName set to null.
For information about managing receipt rule sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
setActiveReceiptRuleSetRequest - Represents a request to set a receipt rule set as the active receipt rule set. You use receipt rule sets
to receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<SetIdentityDkimEnabledResult> setIdentityDkimEnabledAsync(SetIdentityDkimEnabledRequest setIdentityDkimEnabledRequest)
Enables or disables Easy DKIM signing of email sent from an identity:
If Easy DKIM signing is enabled for a domain name identity (e.g., example.com), then Amazon SES will
DKIM-sign all email sent by addresses under that domain name (e.g., [email protected]).
If Easy DKIM signing is enabled for an email address, then Amazon SES will DKIM-sign all email sent by that email address.
For email addresses (e.g., [email protected]), you can only enable Easy DKIM signing if the
corresponding domain (e.g., example.com) has been set up for Easy DKIM using the AWS Console or the
VerifyDomainDkim action.
This action is throttled at one request per second.
For more information about Easy DKIM signing, go to the Amazon SES Developer Guide.
setIdentityDkimEnabledRequest - Represents a request to enable or disable Amazon SES Easy DKIM signing for an identity. For more
information about setting up Easy DKIM, see the Amazon SES Developer Guide.Future<SetIdentityDkimEnabledResult> setIdentityDkimEnabledAsync(SetIdentityDkimEnabledRequest setIdentityDkimEnabledRequest, AsyncHandler<SetIdentityDkimEnabledRequest,SetIdentityDkimEnabledResult> asyncHandler)
Enables or disables Easy DKIM signing of email sent from an identity:
If Easy DKIM signing is enabled for a domain name identity (e.g., example.com), then Amazon SES will
DKIM-sign all email sent by addresses under that domain name (e.g., [email protected]).
If Easy DKIM signing is enabled for an email address, then Amazon SES will DKIM-sign all email sent by that email address.
For email addresses (e.g., [email protected]), you can only enable Easy DKIM signing if the
corresponding domain (e.g., example.com) has been set up for Easy DKIM using the AWS Console or the
VerifyDomainDkim action.
This action is throttled at one request per second.
For more information about Easy DKIM signing, go to the Amazon SES Developer Guide.
setIdentityDkimEnabledRequest - Represents a request to enable or disable Amazon SES Easy DKIM signing for an identity. For more
information about setting up Easy DKIM, see the Amazon SES Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<SetIdentityFeedbackForwardingEnabledResult> setIdentityFeedbackForwardingEnabledAsync(SetIdentityFeedbackForwardingEnabledRequest setIdentityFeedbackForwardingEnabledRequest)
Given an identity (an email address or a domain), enables or disables whether Amazon SES forwards bounce and complaint notifications as email. Feedback forwarding can only be disabled when Amazon Simple Notification Service (Amazon SNS) topics are specified for both bounces and complaints.
Feedback forwarding does not apply to delivery notifications. Delivery notifications are only available through Amazon SNS.
This action is throttled at one request per second.
For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.
setIdentityFeedbackForwardingEnabledRequest - Represents a request to enable or disable whether Amazon SES forwards you bounce and complaint
notifications through email. For information about email feedback forwarding, see the Amazon SES
Developer Guide.Future<SetIdentityFeedbackForwardingEnabledResult> setIdentityFeedbackForwardingEnabledAsync(SetIdentityFeedbackForwardingEnabledRequest setIdentityFeedbackForwardingEnabledRequest, AsyncHandler<SetIdentityFeedbackForwardingEnabledRequest,SetIdentityFeedbackForwardingEnabledResult> asyncHandler)
Given an identity (an email address or a domain), enables or disables whether Amazon SES forwards bounce and complaint notifications as email. Feedback forwarding can only be disabled when Amazon Simple Notification Service (Amazon SNS) topics are specified for both bounces and complaints.
Feedback forwarding does not apply to delivery notifications. Delivery notifications are only available through Amazon SNS.
This action is throttled at one request per second.
For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.
setIdentityFeedbackForwardingEnabledRequest - Represents a request to enable or disable whether Amazon SES forwards you bounce and complaint
notifications through email. For information about email feedback forwarding, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<SetIdentityHeadersInNotificationsEnabledResult> setIdentityHeadersInNotificationsEnabledAsync(SetIdentityHeadersInNotificationsEnabledRequest setIdentityHeadersInNotificationsEnabledRequest)
Given an identity (an email address or a domain), sets whether Amazon SES includes the original email headers in the Amazon Simple Notification Service (Amazon SNS) notifications of a specified type.
This action is throttled at one request per second.
For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.
setIdentityHeadersInNotificationsEnabledRequest - Represents a request to set whether Amazon SES includes the original email headers in the Amazon SNS
notifications of a specified type. For information about notifications, see the Amazon SES
Developer Guide.Future<SetIdentityHeadersInNotificationsEnabledResult> setIdentityHeadersInNotificationsEnabledAsync(SetIdentityHeadersInNotificationsEnabledRequest setIdentityHeadersInNotificationsEnabledRequest, AsyncHandler<SetIdentityHeadersInNotificationsEnabledRequest,SetIdentityHeadersInNotificationsEnabledResult> asyncHandler)
Given an identity (an email address or a domain), sets whether Amazon SES includes the original email headers in the Amazon Simple Notification Service (Amazon SNS) notifications of a specified type.
This action is throttled at one request per second.
For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.
setIdentityHeadersInNotificationsEnabledRequest - Represents a request to set whether Amazon SES includes the original email headers in the Amazon SNS
notifications of a specified type. For information about notifications, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<SetIdentityMailFromDomainResult> setIdentityMailFromDomainAsync(SetIdentityMailFromDomainRequest setIdentityMailFromDomainRequest)
Enables or disables the custom MAIL FROM domain setup for a verified identity (an email address or a domain).
To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. If you want your emails to pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
setIdentityMailFromDomainRequest - Represents a request to enable or disable the Amazon SES custom MAIL FROM domain setup for a verified
identity. For information about using a custom MAIL FROM domain, see the Amazon SES Developer Guide.Future<SetIdentityMailFromDomainResult> setIdentityMailFromDomainAsync(SetIdentityMailFromDomainRequest setIdentityMailFromDomainRequest, AsyncHandler<SetIdentityMailFromDomainRequest,SetIdentityMailFromDomainResult> asyncHandler)
Enables or disables the custom MAIL FROM domain setup for a verified identity (an email address or a domain).
To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. If you want your emails to pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
setIdentityMailFromDomainRequest - Represents a request to enable or disable the Amazon SES custom MAIL FROM domain setup for a verified
identity. For information about using a custom MAIL FROM domain, see the Amazon SES Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<SetIdentityNotificationTopicResult> setIdentityNotificationTopicAsync(SetIdentityNotificationTopicRequest setIdentityNotificationTopicRequest)
Given an identity (an email address or a domain), sets the Amazon Simple Notification Service (Amazon SNS) topic
to which Amazon SES will publish bounce, complaint, and/or delivery notifications for emails sent with that
identity as the Source.
Unless feedback forwarding is enabled, you must specify Amazon SNS topics for bounce and complaint notifications.
For more information, see SetIdentityFeedbackForwardingEnabled.
This action is throttled at one request per second.
For more information about feedback notification, see the Amazon SES Developer Guide.
setIdentityNotificationTopicRequest - Represents a request to specify the Amazon SNS topic to which Amazon SES will publish bounce, complaint,
or delivery notifications for emails sent with that identity as the Source. For information about Amazon
SES notifications, see the Amazon SES
Developer Guide.Future<SetIdentityNotificationTopicResult> setIdentityNotificationTopicAsync(SetIdentityNotificationTopicRequest setIdentityNotificationTopicRequest, AsyncHandler<SetIdentityNotificationTopicRequest,SetIdentityNotificationTopicResult> asyncHandler)
Given an identity (an email address or a domain), sets the Amazon Simple Notification Service (Amazon SNS) topic
to which Amazon SES will publish bounce, complaint, and/or delivery notifications for emails sent with that
identity as the Source.
Unless feedback forwarding is enabled, you must specify Amazon SNS topics for bounce and complaint notifications.
For more information, see SetIdentityFeedbackForwardingEnabled.
This action is throttled at one request per second.
For more information about feedback notification, see the Amazon SES Developer Guide.
setIdentityNotificationTopicRequest - Represents a request to specify the Amazon SNS topic to which Amazon SES will publish bounce, complaint,
or delivery notifications for emails sent with that identity as the Source. For information about Amazon
SES notifications, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<SetReceiptRulePositionResult> setReceiptRulePositionAsync(SetReceiptRulePositionRequest setReceiptRulePositionRequest)
Sets the position of the specified receipt rule in the receipt rule set.
For information about managing receipt rules, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
setReceiptRulePositionRequest - Represents a request to set the position of a receipt rule in a receipt rule set. You use receipt rule
sets to receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.Future<SetReceiptRulePositionResult> setReceiptRulePositionAsync(SetReceiptRulePositionRequest setReceiptRulePositionRequest, AsyncHandler<SetReceiptRulePositionRequest,SetReceiptRulePositionResult> asyncHandler)
Sets the position of the specified receipt rule in the receipt rule set.
For information about managing receipt rules, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
setReceiptRulePositionRequest - Represents a request to set the position of a receipt rule in a receipt rule set. You use receipt rule
sets to receive email with Amazon SES. For more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<UpdateConfigurationSetEventDestinationResult> updateConfigurationSetEventDestinationAsync(UpdateConfigurationSetEventDestinationRequest updateConfigurationSetEventDestinationRequest)
Updates the event destination of a configuration set.
When you create or update an event destination, you must provide one, and only one, destination. The destination can be either Amazon CloudWatch or Amazon Kinesis Firehose.
Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch or Amazon Kinesis Firehose. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
updateConfigurationSetEventDestinationRequest - Represents a request to update the event destination of a configuration set. Configuration sets enable you
to publish email sending events. For information about using configuration sets, see the Amazon SES
Developer Guide.Future<UpdateConfigurationSetEventDestinationResult> updateConfigurationSetEventDestinationAsync(UpdateConfigurationSetEventDestinationRequest updateConfigurationSetEventDestinationRequest, AsyncHandler<UpdateConfigurationSetEventDestinationRequest,UpdateConfigurationSetEventDestinationResult> asyncHandler)
Updates the event destination of a configuration set.
When you create or update an event destination, you must provide one, and only one, destination. The destination can be either Amazon CloudWatch or Amazon Kinesis Firehose.
Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch or Amazon Kinesis Firehose. For information about using configuration sets, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
updateConfigurationSetEventDestinationRequest - Represents a request to update the event destination of a configuration set. Configuration sets enable you
to publish email sending events. For information about using configuration sets, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<UpdateReceiptRuleResult> updateReceiptRuleAsync(UpdateReceiptRuleRequest updateReceiptRuleRequest)
Updates a receipt rule.
For information about managing receipt rules, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
updateReceiptRuleRequest - Represents a request to update a receipt rule. You use receipt rules to receive email with Amazon SES. For
more information, see the Amazon SES
Developer Guide.Future<UpdateReceiptRuleResult> updateReceiptRuleAsync(UpdateReceiptRuleRequest updateReceiptRuleRequest, AsyncHandler<UpdateReceiptRuleRequest,UpdateReceiptRuleResult> asyncHandler)
Updates a receipt rule.
For information about managing receipt rules, see the Amazon SES Developer Guide.
This action is throttled at one request per second.
updateReceiptRuleRequest - Represents a request to update a receipt rule. You use receipt rules to receive email with Amazon SES. For
more information, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<VerifyDomainDkimResult> verifyDomainDkimAsync(VerifyDomainDkimRequest verifyDomainDkimRequest)
Returns a set of DKIM tokens for a domain. DKIM tokens are character strings that represent your domain's identity. Using these tokens, you will need to create DNS CNAME records that point to DKIM public keys hosted by Amazon SES. Amazon Web Services will eventually detect that you have updated your DNS records; this detection process may take up to 72 hours. Upon successful detection, Amazon SES will be able to DKIM-sign email originating from that domain.
This action is throttled at one request per second.
To enable or disable Easy DKIM signing for a domain, use the SetIdentityDkimEnabled action.
For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.
verifyDomainDkimRequest - Represents a request to generate the CNAME records needed to set up Easy DKIM with Amazon SES. For more
information about setting up Easy DKIM, see the Amazon SES Developer Guide.Future<VerifyDomainDkimResult> verifyDomainDkimAsync(VerifyDomainDkimRequest verifyDomainDkimRequest, AsyncHandler<VerifyDomainDkimRequest,VerifyDomainDkimResult> asyncHandler)
Returns a set of DKIM tokens for a domain. DKIM tokens are character strings that represent your domain's identity. Using these tokens, you will need to create DNS CNAME records that point to DKIM public keys hosted by Amazon SES. Amazon Web Services will eventually detect that you have updated your DNS records; this detection process may take up to 72 hours. Upon successful detection, Amazon SES will be able to DKIM-sign email originating from that domain.
This action is throttled at one request per second.
To enable or disable Easy DKIM signing for a domain, use the SetIdentityDkimEnabled action.
For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.
verifyDomainDkimRequest - Represents a request to generate the CNAME records needed to set up Easy DKIM with Amazon SES. For more
information about setting up Easy DKIM, see the Amazon SES Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<VerifyDomainIdentityResult> verifyDomainIdentityAsync(VerifyDomainIdentityRequest verifyDomainIdentityRequest)
Verifies a domain.
This action is throttled at one request per second.
verifyDomainIdentityRequest - Represents a request to begin Amazon SES domain verification and to generate the TXT records that you must
publish to the DNS server of your domain to complete the verification. For information about domain
verification, see the Amazon SES Developer
Guide.Future<VerifyDomainIdentityResult> verifyDomainIdentityAsync(VerifyDomainIdentityRequest verifyDomainIdentityRequest, AsyncHandler<VerifyDomainIdentityRequest,VerifyDomainIdentityResult> asyncHandler)
Verifies a domain.
This action is throttled at one request per second.
verifyDomainIdentityRequest - Represents a request to begin Amazon SES domain verification and to generate the TXT records that you must
publish to the DNS server of your domain to complete the verification. For information about domain
verification, see the Amazon SES Developer
Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<VerifyEmailAddressResult> verifyEmailAddressAsync(VerifyEmailAddressRequest verifyEmailAddressRequest)
Verifies an email address. This action causes a confirmation email message to be sent to the specified address.
The VerifyEmailAddress action is deprecated as of the May 15, 2012 release of Domain Verification. The VerifyEmailIdentity action is now preferred.
This action is throttled at one request per second.
verifyEmailAddressRequest - Represents a request to begin email address verification with Amazon SES. For information about email
address verification, see the Amazon SES
Developer Guide.Future<VerifyEmailAddressResult> verifyEmailAddressAsync(VerifyEmailAddressRequest verifyEmailAddressRequest, AsyncHandler<VerifyEmailAddressRequest,VerifyEmailAddressResult> asyncHandler)
Verifies an email address. This action causes a confirmation email message to be sent to the specified address.
The VerifyEmailAddress action is deprecated as of the May 15, 2012 release of Domain Verification. The VerifyEmailIdentity action is now preferred.
This action is throttled at one request per second.
verifyEmailAddressRequest - Represents a request to begin email address verification with Amazon SES. For information about email
address verification, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Future<VerifyEmailIdentityResult> verifyEmailIdentityAsync(VerifyEmailIdentityRequest verifyEmailIdentityRequest)
Verifies an email address. This action causes a confirmation email message to be sent to the specified address.
This action is throttled at one request per second.
verifyEmailIdentityRequest - Represents a request to begin email address verification with Amazon SES. For information about email
address verification, see the Amazon SES
Developer Guide.Future<VerifyEmailIdentityResult> verifyEmailIdentityAsync(VerifyEmailIdentityRequest verifyEmailIdentityRequest, AsyncHandler<VerifyEmailIdentityRequest,VerifyEmailIdentityResult> asyncHandler)
Verifies an email address. This action causes a confirmation email message to be sent to the specified address.
This action is throttled at one request per second.
verifyEmailIdentityRequest - Represents a request to begin email address verification with Amazon SES. For information about email
address verification, see the Amazon SES
Developer Guide.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.Copyright © 2013 Amazon Web Services, Inc. All Rights Reserved.