com.amazonaws.services.directconnect.model

Class CreateConnectionResult

java.lang.Object

com.amazonaws.AmazonWebServiceResult<ResponseMetadata>

com.amazonaws.services.directconnect.model.CreateConnectionResult

All Implemented Interfaces:

Serializable, Cloneable

@Generated(value="com.amazonaws:aws-java-sdk-code-generator")
public class CreateConnectionResult
extends AmazonWebServiceResult<ResponseMetadata>
implements Serializable, Cloneable

Information about an AWS Direct Connect connection.

See Also:

AWS API Documentation, Serialized Form

Constructor Summary

Constructors

Constructor and Description
CreateConnectionResult()

Method Summary

Modifier and Type	Method and Description
CreateConnectionResult	clone()
boolean	equals(Object obj)
String	getAwsDevice() The Direct Connect endpoint on which the physical connection terminates.
String	getAwsDeviceV2() The Direct Connect endpoint on which the physical connection terminates.
String	getBandwidth() The bandwidth of the connection.
String	getConnectionId() The ID of the connection.
String	getConnectionName() The name of the connection.
String	getConnectionState() The state of the connection.
String	getHasLogicalRedundancy() Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
Boolean	getJumboFrameCapable() Indicates whether jumbo frames (9001 MTU) are supported.
String	getLagId() The ID of the LAG.
Date	getLoaIssueTime() The time of the most recent call to DescribeLoa for this connection.
String	getLocation() The location of the connection.
String	getOwnerAccount() The ID of the AWS account that owns the connection.
String	getPartnerName() The name of the AWS Direct Connect service provider associated with the connection.
String	getProviderName() The name of the service provider associated with the connection.
String	getRegion() The AWS Region where the connection is located.
List<Tag>	getTags() The tags associated with the connection.
Integer	getVlan() The ID of the VLAN.
int	hashCode()
Boolean	isJumboFrameCapable() Indicates whether jumbo frames (9001 MTU) are supported.
void	setAwsDevice(String awsDevice) The Direct Connect endpoint on which the physical connection terminates.
void	setAwsDeviceV2(String awsDeviceV2) The Direct Connect endpoint on which the physical connection terminates.
void	setBandwidth(String bandwidth) The bandwidth of the connection.
void	setConnectionId(String connectionId) The ID of the connection.
void	setConnectionName(String connectionName) The name of the connection.
void	setConnectionState(ConnectionState connectionState) The state of the connection.
void	setConnectionState(String connectionState) The state of the connection.
void	setHasLogicalRedundancy(HasLogicalRedundancy hasLogicalRedundancy) Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
void	setHasLogicalRedundancy(String hasLogicalRedundancy) Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
void	setJumboFrameCapable(Boolean jumboFrameCapable) Indicates whether jumbo frames (9001 MTU) are supported.
void	setLagId(String lagId) The ID of the LAG.
void	setLoaIssueTime(Date loaIssueTime) The time of the most recent call to DescribeLoa for this connection.
void	setLocation(String location) The location of the connection.
void	setOwnerAccount(String ownerAccount) The ID of the AWS account that owns the connection.
void	setPartnerName(String partnerName) The name of the AWS Direct Connect service provider associated with the connection.
void	setProviderName(String providerName) The name of the service provider associated with the connection.
void	setRegion(String region) The AWS Region where the connection is located.
void	setTags(Collection<Tag> tags) The tags associated with the connection.
void	setVlan(Integer vlan) The ID of the VLAN.
String	toString() Returns a string representation of this object.
CreateConnectionResult	withAwsDevice(String awsDevice) The Direct Connect endpoint on which the physical connection terminates.
CreateConnectionResult	withAwsDeviceV2(String awsDeviceV2) The Direct Connect endpoint on which the physical connection terminates.
CreateConnectionResult	withBandwidth(String bandwidth) The bandwidth of the connection.
CreateConnectionResult	withConnectionId(String connectionId) The ID of the connection.
CreateConnectionResult	withConnectionName(String connectionName) The name of the connection.
CreateConnectionResult	withConnectionState(ConnectionState connectionState) The state of the connection.
CreateConnectionResult	withConnectionState(String connectionState) The state of the connection.
CreateConnectionResult	withHasLogicalRedundancy(HasLogicalRedundancy hasLogicalRedundancy) Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
CreateConnectionResult	withHasLogicalRedundancy(String hasLogicalRedundancy) Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
CreateConnectionResult	withJumboFrameCapable(Boolean jumboFrameCapable) Indicates whether jumbo frames (9001 MTU) are supported.
CreateConnectionResult	withLagId(String lagId) The ID of the LAG.
CreateConnectionResult	withLoaIssueTime(Date loaIssueTime) The time of the most recent call to DescribeLoa for this connection.
CreateConnectionResult	withLocation(String location) The location of the connection.
CreateConnectionResult	withOwnerAccount(String ownerAccount) The ID of the AWS account that owns the connection.
CreateConnectionResult	withPartnerName(String partnerName) The name of the AWS Direct Connect service provider associated with the connection.
CreateConnectionResult	withProviderName(String providerName) The name of the service provider associated with the connection.
CreateConnectionResult	withRegion(String region) The AWS Region where the connection is located.
CreateConnectionResult	withTags(Collection<Tag> tags) The tags associated with the connection.
CreateConnectionResult	withTags(Tag... tags) The tags associated with the connection.
CreateConnectionResult	withVlan(Integer vlan) The ID of the VLAN.

Methods inherited from class com.amazonaws.AmazonWebServiceResult

getSdkHttpMetadata, getSdkResponseMetadata, setSdkHttpMetadata, setSdkResponseMetadata

Methods inherited from class java.lang.Object

getClass, notify, notifyAll, wait, wait, wait

Constructor Detail

CreateConnectionResult

public CreateConnectionResult()

Method Detail

setOwnerAccount

public void setOwnerAccount(String ownerAccount)

The ID of the AWS account that owns the connection.

Parameters:

ownerAccount - The ID of the AWS account that owns the connection.

getOwnerAccount

public String getOwnerAccount()

The ID of the AWS account that owns the connection.

Returns:

The ID of the AWS account that owns the connection.

withOwnerAccount

public CreateConnectionResult withOwnerAccount(String ownerAccount)

The ID of the AWS account that owns the connection.

Parameters:

ownerAccount - The ID of the AWS account that owns the connection.

Returns:

Returns a reference to this object so that method calls can be chained together.

setConnectionId

public void setConnectionId(String connectionId)

The ID of the connection.

Parameters:

connectionId - The ID of the connection.

getConnectionId

public String getConnectionId()

The ID of the connection.

Returns:

The ID of the connection.

withConnectionId

public CreateConnectionResult withConnectionId(String connectionId)

The ID of the connection.

Parameters:

connectionId - The ID of the connection.

Returns:

Returns a reference to this object so that method calls can be chained together.

setConnectionName

public void setConnectionName(String connectionName)

The name of the connection.

Parameters:

connectionName - The name of the connection.

getConnectionName

public String getConnectionName()

The name of the connection.

Returns:

The name of the connection.

withConnectionName

public CreateConnectionResult withConnectionName(String connectionName)

The name of the connection.

Parameters:

connectionName - The name of the connection.

Returns:

Returns a reference to this object so that method calls can be chained together.

setConnectionState

public void setConnectionState(String connectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

Parameters:

connectionState - The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

See Also:

ConnectionState

getConnectionState

public String getConnectionState()

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

Returns:

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

See Also:

ConnectionState

withConnectionState

public CreateConnectionResult withConnectionState(String connectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

Parameters:

connectionState - The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

ConnectionState

setConnectionState

public void setConnectionState(ConnectionState connectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

Parameters:

connectionState - The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

See Also:

ConnectionState

withConnectionState

public CreateConnectionResult withConnectionState(ConnectionState connectionState)

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

Parameters:

connectionState - The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

ConnectionState

setRegion

public void setRegion(String region)

The AWS Region where the connection is located.

Parameters:

region - The AWS Region where the connection is located.

getRegion

public String getRegion()

The AWS Region where the connection is located.

Returns:

The AWS Region where the connection is located.

withRegion

public CreateConnectionResult withRegion(String region)

The AWS Region where the connection is located.

Parameters:

region - The AWS Region where the connection is located.

Returns:

Returns a reference to this object so that method calls can be chained together.

setLocation

public void setLocation(String location)

The location of the connection.

Parameters:

location - The location of the connection.

getLocation

public String getLocation()

The location of the connection.

Returns:

The location of the connection.

withLocation

public CreateConnectionResult withLocation(String location)

The location of the connection.

Parameters:

location - The location of the connection.

Returns:

Returns a reference to this object so that method calls can be chained together.

setBandwidth

public void setBandwidth(String bandwidth)

The bandwidth of the connection.

Parameters:

bandwidth - The bandwidth of the connection.

getBandwidth

public String getBandwidth()

The bandwidth of the connection.

Returns:

The bandwidth of the connection.

withBandwidth

public CreateConnectionResult withBandwidth(String bandwidth)

The bandwidth of the connection.

Parameters:

bandwidth - The bandwidth of the connection.

Returns:

Returns a reference to this object so that method calls can be chained together.

setVlan

public void setVlan(Integer vlan)

The ID of the VLAN.

Parameters:

vlan - The ID of the VLAN.

getVlan

public Integer getVlan()

The ID of the VLAN.

Returns:

The ID of the VLAN.

withVlan

public CreateConnectionResult withVlan(Integer vlan)

The ID of the VLAN.

Parameters:

vlan - The ID of the VLAN.

Returns:

Returns a reference to this object so that method calls can be chained together.

setPartnerName

public void setPartnerName(String partnerName)

The name of the AWS Direct Connect service provider associated with the connection.

Parameters:

partnerName - The name of the AWS Direct Connect service provider associated with the connection.

getPartnerName

public String getPartnerName()

The name of the AWS Direct Connect service provider associated with the connection.

Returns:

The name of the AWS Direct Connect service provider associated with the connection.

withPartnerName

public CreateConnectionResult withPartnerName(String partnerName)

The name of the AWS Direct Connect service provider associated with the connection.

Parameters:

partnerName - The name of the AWS Direct Connect service provider associated with the connection.

Returns:

Returns a reference to this object so that method calls can be chained together.

setLoaIssueTime

public void setLoaIssueTime(Date loaIssueTime)

The time of the most recent call to DescribeLoa for this connection.

Parameters:

loaIssueTime - The time of the most recent call to DescribeLoa for this connection.

getLoaIssueTime

public Date getLoaIssueTime()

The time of the most recent call to DescribeLoa for this connection.

Returns:

The time of the most recent call to DescribeLoa for this connection.

withLoaIssueTime

public CreateConnectionResult withLoaIssueTime(Date loaIssueTime)

The time of the most recent call to DescribeLoa for this connection.

Parameters:

loaIssueTime - The time of the most recent call to DescribeLoa for this connection.

Returns:

Returns a reference to this object so that method calls can be chained together.

setLagId

public void setLagId(String lagId)

The ID of the LAG.

Parameters:

lagId - The ID of the LAG.

getLagId

public String getLagId()

The ID of the LAG.

Returns:

The ID of the LAG.

withLagId

public CreateConnectionResult withLagId(String lagId)

The ID of the LAG.

Parameters:

lagId - The ID of the LAG.

Returns:

Returns a reference to this object so that method calls can be chained together.

setAwsDevice

public void setAwsDevice(String awsDevice)

The Direct Connect endpoint on which the physical connection terminates.

Parameters:

awsDevice - The Direct Connect endpoint on which the physical connection terminates.

getAwsDevice

public String getAwsDevice()

The Direct Connect endpoint on which the physical connection terminates.

Returns:

The Direct Connect endpoint on which the physical connection terminates.

withAwsDevice

public CreateConnectionResult withAwsDevice(String awsDevice)

The Direct Connect endpoint on which the physical connection terminates.

Parameters:

awsDevice - The Direct Connect endpoint on which the physical connection terminates.

Returns:

Returns a reference to this object so that method calls can be chained together.

setJumboFrameCapable

public void setJumboFrameCapable(Boolean jumboFrameCapable)

Indicates whether jumbo frames (9001 MTU) are supported.

Parameters:

jumboFrameCapable - Indicates whether jumbo frames (9001 MTU) are supported.

getJumboFrameCapable

public Boolean getJumboFrameCapable()

Indicates whether jumbo frames (9001 MTU) are supported.

Returns:

Indicates whether jumbo frames (9001 MTU) are supported.

withJumboFrameCapable

public CreateConnectionResult withJumboFrameCapable(Boolean jumboFrameCapable)

Indicates whether jumbo frames (9001 MTU) are supported.

Parameters:

jumboFrameCapable - Indicates whether jumbo frames (9001 MTU) are supported.

Returns:

Returns a reference to this object so that method calls can be chained together.

isJumboFrameCapable

public Boolean isJumboFrameCapable()

Indicates whether jumbo frames (9001 MTU) are supported.

Returns:

Indicates whether jumbo frames (9001 MTU) are supported.

setAwsDeviceV2

public void setAwsDeviceV2(String awsDeviceV2)

The Direct Connect endpoint on which the physical connection terminates.

Parameters:

awsDeviceV2 - The Direct Connect endpoint on which the physical connection terminates.

getAwsDeviceV2

public String getAwsDeviceV2()

The Direct Connect endpoint on which the physical connection terminates.

Returns:

The Direct Connect endpoint on which the physical connection terminates.

withAwsDeviceV2

public CreateConnectionResult withAwsDeviceV2(String awsDeviceV2)

The Direct Connect endpoint on which the physical connection terminates.

Parameters:

awsDeviceV2 - The Direct Connect endpoint on which the physical connection terminates.

Returns:

Returns a reference to this object so that method calls can be chained together.

setHasLogicalRedundancy

public void setHasLogicalRedundancy(String hasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

Parameters:

hasLogicalRedundancy - Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

See Also:

HasLogicalRedundancy

getHasLogicalRedundancy

public String getHasLogicalRedundancy()

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

Returns:

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

See Also:

HasLogicalRedundancy

withHasLogicalRedundancy

public CreateConnectionResult withHasLogicalRedundancy(String hasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

Parameters:

hasLogicalRedundancy - Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

HasLogicalRedundancy

setHasLogicalRedundancy

public void setHasLogicalRedundancy(HasLogicalRedundancy hasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

Parameters:

hasLogicalRedundancy - Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

See Also:

HasLogicalRedundancy

withHasLogicalRedundancy

public CreateConnectionResult withHasLogicalRedundancy(HasLogicalRedundancy hasLogicalRedundancy)

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

Parameters:

hasLogicalRedundancy - Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

HasLogicalRedundancy

getTags

public List<Tag> getTags()

The tags associated with the connection.

Returns:

The tags associated with the connection.

setTags

public void setTags(Collection<Tag> tags)

The tags associated with the connection.

Parameters:

tags - The tags associated with the connection.

withTags

public CreateConnectionResult withTags(Tag... tags)

The tags associated with the connection.

NOTE: This method appends the values to the existing list (if any). Use setTags(java.util.Collection) or withTags(java.util.Collection) if you want to override the existing values.

Parameters:

tags - The tags associated with the connection.

Returns:

Returns a reference to this object so that method calls can be chained together.

withTags

public CreateConnectionResult withTags(Collection<Tag> tags)

The tags associated with the connection.

Parameters:

tags - The tags associated with the connection.

Returns:

Returns a reference to this object so that method calls can be chained together.

setProviderName

public void setProviderName(String providerName)

The name of the service provider associated with the connection.

Parameters:

providerName - The name of the service provider associated with the connection.

getProviderName

public String getProviderName()

The name of the service provider associated with the connection.

Returns:

The name of the service provider associated with the connection.

withProviderName

public CreateConnectionResult withProviderName(String providerName)

The name of the service provider associated with the connection.

Parameters:

providerName - The name of the service provider associated with the connection.

Returns:

Returns a reference to this object so that method calls can be chained together.

toString

public String toString()

Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.

Overrides:

toString in class Object

Returns:

A string representation of this object.

See Also:

Object.toString()

equals

public boolean equals(Object obj)

Overrides:

equals in class Object

hashCode

public int hashCode()

Overrides:

hashCode in class Object

clone

public CreateConnectionResult clone()

Overrides:

clone in class Object