@Generated(value="com.amazonaws:aws-java-sdk-code-generator") public interface AWSGlobalAccelerator
Note: Do not directly implement this interface, new methods are added to it regularly. Extend from
AbstractAWSGlobalAccelerator instead.
This is the AWS Global Accelerator API Reference. This guide is for developers who need detailed information about AWS Global Accelerator API actions, data types, and errors. For more information about Global Accelerator features, see the AWS Global Accelerator Developer Guide.
AWS Global Accelerator is a service in which you create accelerators to improve availability and performance of your applications for local and global users.
You must specify the US West (Oregon) Region to create or update accelerators.
By default, Global Accelerator provides you with static IP addresses that you associate with your accelerator. (Instead of using the IP addresses that Global Accelerator provides, you can configure these entry points to be IPv4 addresses from your own IP address ranges that you bring to Global Accelerator.) The static IP addresses are anycast from the AWS edge network and distribute incoming application traffic across multiple endpoint resources in multiple AWS Regions, which increases the availability of your applications. Endpoints can be Network Load Balancers, Application Load Balancers, EC2 instances, or Elastic IP addresses that are located in one AWS Region or multiple Regions.
Global Accelerator uses the AWS global network to route traffic to the optimal regional endpoint based on health, client location, and policies that you configure. The service reacts instantly to changes in health or configuration to ensure that internet traffic from clients is directed to only healthy endpoints.
Global Accelerator includes components that work together to help you improve performance and availability for your applications:
By default, AWS Global Accelerator provides you with a set of static IP addresses that are anycast from the AWS edge network and serve as the single fixed entry points for your clients. Or you can configure these entry points to be IPv4 addresses from your own IP address ranges that you bring to Global Accelerator (BYOIP). For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide. If you already have load balancers, EC2 instances, or Elastic IP addresses set up for your applications, you can easily add those to Global Accelerator to allow the resources to be accessed by the static IP addresses.
The static IP addresses remain assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to it, so you can no longer route traffic by using them. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide.
An accelerator directs traffic to optimal endpoints over the AWS global network to improve availability and performance for your internet applications that have a global audience. Each accelerator includes one or more listeners.
Global Accelerator assigns each accelerator a default Domain Name System (DNS) name, similar to
a1234567890abcdef.awsglobalaccelerator.com, that points to your Global Accelerator static IP addresses.
Depending on the use case, you can use your accelerator's static IP addresses or DNS name to route traffic to your
accelerator, or set up DNS records to route traffic using your own custom domain name.
A network zone services the static IP addresses for your accelerator from a unique IP subnet. Similar to an AWS Availability Zone, a network zone is an isolated unit with its own set of physical infrastructure. When you configure an accelerator, by default, Global Accelerator allocates two IPv4 addresses for it. If one IP address from a network zone becomes unavailable due to IP address blocking by certain client networks, or network disruptions, then client applications can retry on the healthy static IP address from the other isolated network zone.
A listener processes inbound connections from clients to Global Accelerator, based on the protocol and port that you configure. Each listener has one or more endpoint groups associated with it, and traffic is forwarded to endpoints in one of the groups. You associate endpoint groups with listeners by specifying the Regions that you want to distribute traffic to. Traffic is distributed to optimal endpoints within the endpoint groups associated with a listener.
Each endpoint group is associated with a specific AWS Region. Endpoint groups include one or more endpoints in the Region. You can increase or reduce the percentage of traffic that would be otherwise directed to an endpoint group by adjusting a setting called a traffic dial. The traffic dial lets you easily do performance testing or blue/green deployment testing for new releases across different AWS Regions, for example.
An endpoint is a Network Load Balancer, Application Load Balancer, EC2 instance, or Elastic IP address. Traffic is routed to endpoints based on several factors, including the geo-proximity to the user, the health of the endpoint, and the configuration options that you choose, such as endpoint weights. For each endpoint, you can configure weights, which are numbers that you can use to specify the proportion of traffic to route to each one. This can be useful, for example, to do performance testing within a Region.
| Modifier and Type | Field and Description |
|---|---|
static String |
ENDPOINT_PREFIX
The region metadata service name for computing region endpoints.
|
| Modifier and Type | Method and Description |
|---|---|
AdvertiseByoipCidrResult |
advertiseByoipCidr(AdvertiseByoipCidrRequest advertiseByoipCidrRequest)
Advertises an IPv4 address range that is provisioned for use with your AWS resources through bring your own IP
addresses (BYOIP).
|
CreateAcceleratorResult |
createAccelerator(CreateAcceleratorRequest createAcceleratorRequest)
Create an accelerator.
|
CreateEndpointGroupResult |
createEndpointGroup(CreateEndpointGroupRequest createEndpointGroupRequest)
Create an endpoint group for the specified listener.
|
CreateListenerResult |
createListener(CreateListenerRequest createListenerRequest)
Create a listener to process inbound connections from clients to an accelerator.
|
DeleteAcceleratorResult |
deleteAccelerator(DeleteAcceleratorRequest deleteAcceleratorRequest)
Delete an accelerator.
|
DeleteEndpointGroupResult |
deleteEndpointGroup(DeleteEndpointGroupRequest deleteEndpointGroupRequest)
Delete an endpoint group from a listener.
|
DeleteListenerResult |
deleteListener(DeleteListenerRequest deleteListenerRequest)
Delete a listener from an accelerator.
|
DeprovisionByoipCidrResult |
deprovisionByoipCidr(DeprovisionByoipCidrRequest deprovisionByoipCidrRequest)
Releases the specified address range that you provisioned to use with your AWS resources through bring your own
IP addresses (BYOIP) and deletes the corresponding address pool.
|
DescribeAcceleratorResult |
describeAccelerator(DescribeAcceleratorRequest describeAcceleratorRequest)
Describe an accelerator.
|
DescribeAcceleratorAttributesResult |
describeAcceleratorAttributes(DescribeAcceleratorAttributesRequest describeAcceleratorAttributesRequest)
Describe the attributes of an accelerator.
|
DescribeEndpointGroupResult |
describeEndpointGroup(DescribeEndpointGroupRequest describeEndpointGroupRequest)
Describe an endpoint group.
|
DescribeListenerResult |
describeListener(DescribeListenerRequest describeListenerRequest)
Describe a listener.
|
ResponseMetadata |
getCachedResponseMetadata(AmazonWebServiceRequest request)
Returns additional metadata for a previously executed successful request, typically used for debugging issues
where a service isn't acting as expected.
|
ListAcceleratorsResult |
listAccelerators(ListAcceleratorsRequest listAcceleratorsRequest)
List the accelerators for an AWS account.
|
ListByoipCidrsResult |
listByoipCidrs(ListByoipCidrsRequest listByoipCidrsRequest)
Lists the IP address ranges that were specified in calls to ProvisionByoipCidr,
including the current state and a history of state changes.
|
ListEndpointGroupsResult |
listEndpointGroups(ListEndpointGroupsRequest listEndpointGroupsRequest)
List the endpoint groups that are associated with a listener.
|
ListListenersResult |
listListeners(ListListenersRequest listListenersRequest)
List the listeners for an accelerator.
|
ListTagsForResourceResult |
listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
List all tags for an accelerator.
|
ProvisionByoipCidrResult |
provisionByoipCidr(ProvisionByoipCidrRequest provisionByoipCidrRequest)
Provisions an IP address range to use with your AWS resources through bring your own IP addresses (BYOIP) and
creates a corresponding address pool.
|
void |
shutdown()
Shuts down this client object, releasing any resources that might be held open.
|
TagResourceResult |
tagResource(TagResourceRequest tagResourceRequest)
Add tags to an accelerator resource.
|
UntagResourceResult |
untagResource(UntagResourceRequest untagResourceRequest)
Remove tags from a Global Accelerator resource.
|
UpdateAcceleratorResult |
updateAccelerator(UpdateAcceleratorRequest updateAcceleratorRequest)
Update an accelerator.
|
UpdateAcceleratorAttributesResult |
updateAcceleratorAttributes(UpdateAcceleratorAttributesRequest updateAcceleratorAttributesRequest)
Update the attributes for an accelerator.
|
UpdateEndpointGroupResult |
updateEndpointGroup(UpdateEndpointGroupRequest updateEndpointGroupRequest)
Update an endpoint group.
|
UpdateListenerResult |
updateListener(UpdateListenerRequest updateListenerRequest)
Update a listener.
|
WithdrawByoipCidrResult |
withdrawByoipCidr(WithdrawByoipCidrRequest withdrawByoipCidrRequest)
Stops advertising an address range that is provisioned as an address pool.
|
static final String ENDPOINT_PREFIX
AdvertiseByoipCidrResult advertiseByoipCidr(AdvertiseByoipCidrRequest advertiseByoipCidrRequest)
Advertises an IPv4 address range that is provisioned for use with your AWS resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to AWS because of propagation delays. To see an AWS CLI example of advertising an address range, scroll down to Example.
To stop advertising the BYOIP address range, use WithdrawByoipCidr.
For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
advertiseByoipCidrRequest - InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.AccessDeniedException - You don't have access permission.ByoipCidrNotFoundException - The CIDR that you specified was not found or is incorrect.IncorrectCidrStateException - The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be
incorrect for this action.CreateAcceleratorResult createAccelerator(CreateAcceleratorRequest createAcceleratorRequest)
Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers. To see an AWS CLI example of creating an accelerator, scroll down to Example.
If you bring your own IP address ranges to AWS Global Accelerator (BYOIP), you can assign IP addresses from your own pool to your accelerator as the static IP address entry points. Only one IP address from each of your IP address ranges can be used for each accelerator.
You must specify the US West (Oregon) Region to create or update accelerators.
createAcceleratorRequest - InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.LimitExceededException - Processing your request would cause you to exceed an AWS Global Accelerator limit.CreateEndpointGroupResult createEndpointGroup(CreateEndpointGroupRequest createEndpointGroupRequest)
Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. To see an AWS CLI example of creating an endpoint group, scroll down to Example.
createEndpointGroupRequest - AcceleratorNotFoundException - The accelerator that you specified doesn't exist.EndpointGroupAlreadyExistsException - The endpoint group that you specified already exists.ListenerNotFoundException - The listener that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.LimitExceededException - Processing your request would cause you to exceed an AWS Global Accelerator limit.AccessDeniedException - You don't have access permission.CreateListenerResult createListener(CreateListenerRequest createListenerRequest)
Create a listener to process inbound connections from clients to an accelerator. Connections arrive to assigned static IP addresses on a port, port range, or list of port ranges that you specify. To see an AWS CLI example of creating a listener, scroll down to Example.
createListenerRequest - InvalidArgumentException - An argument that you specified is invalid.AcceleratorNotFoundException - The accelerator that you specified doesn't exist.InvalidPortRangeException - The port numbers that you specified are not valid numbers or are not unique for this accelerator.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.LimitExceededException - Processing your request would cause you to exceed an AWS Global Accelerator limit.DeleteAcceleratorResult deleteAccelerator(DeleteAcceleratorRequest deleteAcceleratorRequest)
Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent
resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set
Enabled to false.
When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.
The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide.
deleteAcceleratorRequest - AcceleratorNotFoundException - The accelerator that you specified doesn't exist.AcceleratorNotDisabledException - The accelerator that you specified could not be disabled.AssociatedListenerFoundException - The accelerator that you specified has a listener associated with it. You must remove all dependent
resources from an accelerator before you can delete it.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.DeleteEndpointGroupResult deleteEndpointGroup(DeleteEndpointGroupRequest deleteEndpointGroupRequest)
Delete an endpoint group from a listener.
deleteEndpointGroupRequest - InvalidArgumentException - An argument that you specified is invalid.EndpointGroupNotFoundException - The endpoint group that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.DeleteListenerResult deleteListener(DeleteListenerRequest deleteListenerRequest)
Delete a listener from an accelerator.
deleteListenerRequest - InvalidArgumentException - An argument that you specified is invalid.ListenerNotFoundException - The listener that you specified doesn't exist.AssociatedEndpointGroupFoundException - The listener that you specified has an endpoint group associated with it. You must remove all dependent
resources from a listener before you can delete it.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.DeprovisionByoipCidrResult deprovisionByoipCidr(DeprovisionByoipCidrRequest deprovisionByoipCidrRequest)
Releases the specified address range that you provisioned to use with your AWS resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool. To see an AWS CLI example of deprovisioning an address range, scroll down to Example.
Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr and you must not have any accelerators that are using static IP addresses allocated from its address range.
For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
deprovisionByoipCidrRequest - InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.AccessDeniedException - You don't have access permission.ByoipCidrNotFoundException - The CIDR that you specified was not found or is incorrect.IncorrectCidrStateException - The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be
incorrect for this action.DescribeAcceleratorResult describeAccelerator(DescribeAcceleratorRequest describeAcceleratorRequest)
Describe an accelerator. To see an AWS CLI example of describing an accelerator, scroll down to Example.
describeAcceleratorRequest - AcceleratorNotFoundException - The accelerator that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.DescribeAcceleratorAttributesResult describeAcceleratorAttributes(DescribeAcceleratorAttributesRequest describeAcceleratorAttributesRequest)
Describe the attributes of an accelerator. To see an AWS CLI example of describing the attributes of an accelerator, scroll down to Example.
describeAcceleratorAttributesRequest - AcceleratorNotFoundException - The accelerator that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.DescribeEndpointGroupResult describeEndpointGroup(DescribeEndpointGroupRequest describeEndpointGroupRequest)
Describe an endpoint group. To see an AWS CLI example of describing an endpoint group, scroll down to Example.
describeEndpointGroupRequest - InvalidArgumentException - An argument that you specified is invalid.EndpointGroupNotFoundException - The endpoint group that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.DescribeListenerResult describeListener(DescribeListenerRequest describeListenerRequest)
Describe a listener. To see an AWS CLI example of describing a listener, scroll down to Example.
describeListenerRequest - InvalidArgumentException - An argument that you specified is invalid.ListenerNotFoundException - The listener that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.ListAcceleratorsResult listAccelerators(ListAcceleratorsRequest listAcceleratorsRequest)
List the accelerators for an AWS account. To see an AWS CLI example of listing the accelerators for an AWS account, scroll down to Example.
listAcceleratorsRequest - InvalidArgumentException - An argument that you specified is invalid.InvalidNextTokenException - There isn't another item to return.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.ListByoipCidrsResult listByoipCidrs(ListByoipCidrsRequest listByoipCidrsRequest)
Lists the IP address ranges that were specified in calls to ProvisionByoipCidr, including the current state and a history of state changes.
To see an AWS CLI example of listing BYOIP CIDR addresses, scroll down to Example.
listByoipCidrsRequest - InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.AccessDeniedException - You don't have access permission.InvalidNextTokenException - There isn't another item to return.ListEndpointGroupsResult listEndpointGroups(ListEndpointGroupsRequest listEndpointGroupsRequest)
List the endpoint groups that are associated with a listener. To see an AWS CLI example of listing the endpoint groups for listener, scroll down to Example.
listEndpointGroupsRequest - ListenerNotFoundException - The listener that you specified doesn't exist.InvalidNextTokenException - There isn't another item to return.InvalidArgumentException - An argument that you specified is invalid.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.ListListenersResult listListeners(ListListenersRequest listListenersRequest)
List the listeners for an accelerator. To see an AWS CLI example of listing the listeners for an accelerator, scroll down to Example.
listListenersRequest - InvalidArgumentException - An argument that you specified is invalid.AcceleratorNotFoundException - The accelerator that you specified doesn't exist.InvalidNextTokenException - There isn't another item to return.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.ListTagsForResourceResult listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
List all tags for an accelerator. To see an AWS CLI example of listing tags for an accelerator, scroll down to Example.
For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
listTagsForResourceRequest - AcceleratorNotFoundException - The accelerator that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.ProvisionByoipCidrResult provisionByoipCidr(ProvisionByoipCidrRequest provisionByoipCidrRequest)
Provisions an IP address range to use with your AWS resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using AdvertiseByoipCidr.
To see an AWS CLI example of provisioning an address range for BYOIP, scroll down to Example.
For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
provisionByoipCidrRequest - InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.LimitExceededException - Processing your request would cause you to exceed an AWS Global Accelerator limit.AccessDeniedException - You don't have access permission.IncorrectCidrStateException - The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be
incorrect for this action.TagResourceResult tagResource(TagResourceRequest tagResourceRequest)
Add tags to an accelerator resource. To see an AWS CLI example of adding tags to an accelerator, scroll down to Example.
For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
tagResourceRequest - AcceleratorNotFoundException - The accelerator that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.UntagResourceResult untagResource(UntagResourceRequest untagResourceRequest)
Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. To see an AWS CLI example of removing tags from an accelerator, scroll down to Example. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed.
For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
untagResourceRequest - AcceleratorNotFoundException - The accelerator that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.UpdateAcceleratorResult updateAccelerator(UpdateAcceleratorRequest updateAcceleratorRequest)
Update an accelerator. To see an AWS CLI example of updating an accelerator, scroll down to Example.
You must specify the US West (Oregon) Region to create or update accelerators.
updateAcceleratorRequest - AcceleratorNotFoundException - The accelerator that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.UpdateAcceleratorAttributesResult updateAcceleratorAttributes(UpdateAcceleratorAttributesRequest updateAcceleratorAttributesRequest)
Update the attributes for an accelerator. To see an AWS CLI example of updating an accelerator to enable flow logs, scroll down to Example.
updateAcceleratorAttributesRequest - AcceleratorNotFoundException - The accelerator that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.AccessDeniedException - You don't have access permission.UpdateEndpointGroupResult updateEndpointGroup(UpdateEndpointGroupRequest updateEndpointGroupRequest)
Update an endpoint group. To see an AWS CLI example of updating an endpoint group, scroll down to Example.
updateEndpointGroupRequest - InvalidArgumentException - An argument that you specified is invalid.EndpointGroupNotFoundException - The endpoint group that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.LimitExceededException - Processing your request would cause you to exceed an AWS Global Accelerator limit.AccessDeniedException - You don't have access permission.UpdateListenerResult updateListener(UpdateListenerRequest updateListenerRequest)
Update a listener. To see an AWS CLI example of updating listener, scroll down to Example.
updateListenerRequest - InvalidArgumentException - An argument that you specified is invalid.InvalidPortRangeException - The port numbers that you specified are not valid numbers or are not unique for this accelerator.ListenerNotFoundException - The listener that you specified doesn't exist.InternalServiceErrorException - There was an internal error for AWS Global Accelerator.LimitExceededException - Processing your request would cause you to exceed an AWS Global Accelerator limit.WithdrawByoipCidrResult withdrawByoipCidr(WithdrawByoipCidrRequest withdrawByoipCidrRequest)
Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time. To see an AWS CLI example of withdrawing an address range for BYOIP so it will no longer be advertised by AWS, scroll down to Example.
It can take a few minutes before traffic to the specified addresses stops routing to AWS because of propagation delays.
For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
withdrawByoipCidrRequest - InternalServiceErrorException - There was an internal error for AWS Global Accelerator.InvalidArgumentException - An argument that you specified is invalid.AccessDeniedException - You don't have access permission.ByoipCidrNotFoundException - The CIDR that you specified was not found or is incorrect.IncorrectCidrStateException - The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be
incorrect for this action.void shutdown()
ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)
Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.
request - The originally executed request.Copyright © 2013 Amazon Web Services, Inc. All Rights Reserved.