| Class | Description |
|---|---|
| AacSettings |
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC.
|
| Ac3Settings |
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
|
| AccelerationSettings |
Accelerated transcoding can significantly speed up jobs with long, visually complex content.
|
| AiffSettings |
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
|
| AncillarySourceSettings |
Settings for ancillary captions source.
|
| AssociateCertificateRequest | |
| AssociateCertificateResult | |
| AudioChannelTaggingSettings |
When you mimic a multi-channel audio layout with multiple mono-channel tracks, you can tag each channel layout
manually.
|
| AudioCodecSettings |
Audio codec settings (CodecSettings) under (AudioDescriptions) contains the group of settings related to audio
encoding.
|
| AudioDescription |
Description of audio output
|
| AudioNormalizationSettings |
Advanced audio normalization settings.
|
| AudioSelector |
Selector for Audio
|
| AudioSelectorGroup |
Group of Audio Selectors
|
| AutomatedAbrSettings |
Use automated ABR to have MediaConvert set up the renditions in your ABR package for you automatically, based on
characteristics of your input video.
|
| AutomatedEncodingSettings |
Use automated encoding to have MediaConvert choose your encoding settings for you, based on characteristics of your
input video.
|
| Av1QvbrSettings |
Settings for quality-defined variable bitrate encoding with the AV1 codec.
|
| Av1Settings |
Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
|
| AvailBlanking |
Settings for Avail Blanking
|
| AvcIntraSettings |
Required when you set your output video codec to AVC-Intra.
|
| AvcIntraUhdSettings |
Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K).
|
| BurninDestinationSettings |
Burn-In Destination Settings.
|
| CancelJobRequest | |
| CancelJobResult | |
| CaptionDescription |
Description of Caption output
|
| CaptionDescriptionPreset |
Caption Description for preset
|
| CaptionDestinationSettings |
Specific settings required by destination type.
|
| CaptionSelector |
Set up captions in your outputs by first selecting them from your input here.
|
| CaptionSourceFramerate |
Ignore this setting unless your input captions format is SCC.
|
| CaptionSourceSettings |
If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions
source file.
|
| ChannelMapping |
Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel, in dB.
|
| CmafAdditionalManifest |
Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this
CMAF output group.
|
| CmafEncryptionSettings |
Settings for CMAF encryption
|
| CmafGroupSettings |
Required when you set (Type) under (OutputGroups)>(OutputGroupSettings) to CMAF_GROUP_SETTINGS.
|
| CmfcSettings |
Settings for MP4 segments in CMAF
|
| ColorCorrector |
Settings for color correction.
|
| ContainerSettings |
Container specific settings.
|
| CreateJobRequest | |
| CreateJobResult | |
| CreateJobTemplateRequest | |
| CreateJobTemplateResult | |
| CreatePresetRequest | |
| CreatePresetResult | |
| CreateQueueRequest | |
| CreateQueueResult | |
| DashAdditionalManifest |
Specify the details for each additional DASH manifest that you want the service to generate for this output group.
|
| DashIsoEncryptionSettings |
Specifies DRM settings for DASH outputs.
|
| DashIsoGroupSettings |
Required when you set (Type) under (OutputGroups)>(OutputGroupSettings) to DASH_ISO_GROUP_SETTINGS.
|
| Deinterlacer |
Settings for deinterlacer
|
| DeleteJobTemplateRequest | |
| DeleteJobTemplateResult | |
| DeletePresetRequest | |
| DeletePresetResult | |
| DeleteQueueRequest | |
| DeleteQueueResult | |
| DescribeEndpointsRequest |
DescribeEndpointsRequest
|
| DescribeEndpointsResult | |
| DestinationSettings |
Settings associated with the destination.
|
| DisassociateCertificateRequest | |
| DisassociateCertificateResult | |
| DolbyVision |
Settings for Dolby Vision
|
| DolbyVisionLevel6Metadata |
Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your
input with new values.
|
| DvbNitSettings |
Inserts DVB Network Information Table (NIT) at the specified table repetition interval.
|
| DvbSdtSettings |
Inserts DVB Service Description Table (NIT) at the specified table repetition interval.
|
| DvbSubDestinationSettings |
DVB-Sub Destination Settings
|
| DvbSubSourceSettings |
DVB Sub Source Settings
|
| DvbTdtSettings |
Inserts DVB Time and Date Table (TDT) at the specified table repetition interval.
|
| Eac3AtmosSettings |
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
|
| Eac3Settings |
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
|
| EmbeddedDestinationSettings |
Settings specific to embedded/ancillary caption outputs, including 608/708 Channel destination number.
|
| EmbeddedSourceSettings |
Settings for embedded captions Source
|
| Endpoint |
Describes an account-specific API endpoint.
|
| EsamManifestConfirmConditionNotification |
ESAM ManifestConfirmConditionNotification defined by OC-SP-ESAM-API-I03-131025.
|
| EsamSettings |
Settings for Event Signaling And Messaging (ESAM).
|
| EsamSignalProcessingNotification |
ESAM SignalProcessingNotification data defined by OC-SP-ESAM-API-I03-131025.
|
| F4vSettings |
Settings for F4v container
|
| FileGroupSettings |
Required when you set (Type) under (OutputGroups)>(OutputGroupSettings) to FILE_GROUP_SETTINGS.
|
| FileSourceSettings |
If your input captions are SCC, SMI, SRT, STL, TTML, or IMSC 1.1 in an xml file, specify the URI of the input caption
source file.
|
| FrameCaptureSettings |
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
|
| GetJobRequest | |
| GetJobResult | |
| GetJobTemplateRequest | |
| GetJobTemplateResult | |
| GetPresetRequest | |
| GetPresetResult | |
| GetQueueRequest | |
| GetQueueResult | |
| H264QvbrSettings |
Settings for quality-defined variable bitrate encoding with the H.264 codec.
|
| H264Settings |
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
|
| H265QvbrSettings |
Settings for quality-defined variable bitrate encoding with the H.265 codec.
|
| H265Settings |
Settings for H265 codec
|
| Hdr10Metadata |
Use these settings to specify static color calibration metadata, as defined by SMPTE ST 2086.
|
| HlsAdditionalManifest |
Specify the details for each additional HLS manifest that you want the service to generate for this output group.
|
| HlsCaptionLanguageMapping |
Caption Language Mapping
|
| HlsEncryptionSettings |
Settings for HLS encryption
|
| HlsGroupSettings |
Required when you set (Type) under (OutputGroups)>(OutputGroupSettings) to HLS_GROUP_SETTINGS.
|
| HlsSettings |
Settings for HLS output groups
|
| HopDestination |
Optional.
|
| Id3Insertion |
To insert ID3 tags in your output, specify two values.
|
| ImageInserter |
Enable the image inserter feature to include a graphic overlay on your video.
|
| ImscDestinationSettings |
Settings specific to IMSC caption outputs.
|
| Input |
Specifies media input
|
| InputClipping |
To transcode only portions of your input (clips), include one Input clipping (one instance of InputClipping in the
JSON job file) for each input clip.
|
| InputDecryptionSettings |
Settings for decrypting any input files that you encrypt before you upload them to Amazon S3.
|
| InputTemplate |
Specified video input in a template.
|
| InsertableImage |
Settings that specify how your still graphic overlay appears.
|
| Job |
Each job converts an input file into an output file or files.
|
| JobMessages |
Provides messages from the service about jobs that you have already successfully submitted.
|
| JobSettings |
JobSettings contains all the transcode settings for a job.
|
| JobTemplate |
A job template is a pre-made set of encoding instructions that you can use to quickly create a job.
|
| JobTemplateSettings |
JobTemplateSettings contains all the transcode settings saved in the template that will be applied to jobs created
from it.
|
| ListJobsRequest | |
| ListJobsResult | |
| ListJobTemplatesRequest | |
| ListJobTemplatesResult | |
| ListPresetsRequest | |
| ListPresetsResult | |
| ListQueuesRequest | |
| ListQueuesResult | |
| ListTagsForResourceRequest | |
| ListTagsForResourceResult | |
| M2tsScte35Esam |
Settings for SCTE-35 signals from ESAM.
|
| M2tsSettings |
MPEG-2 TS container settings.
|
| M3u8Settings |
Settings for TS segments in HLS
|
| MotionImageInserter |
Overlay motion graphics on top of your video at the time that you specify.
|
| MotionImageInsertionFramerate |
For motion overlays that don't have a built-in frame rate, specify the frame rate of the overlay in frames per
second, as a fraction.
|
| MotionImageInsertionOffset |
Specify the offset between the upper-left corner of the video frame and the top left corner of the overlay.
|
| MovSettings |
Settings for MOV Container.
|
| Mp2Settings |
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
|
| Mp3Settings |
Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
|
| Mp4Settings |
Settings for MP4 container.
|
| MpdSettings |
Settings for MP4 segments in DASH
|
| Mpeg2Settings |
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
|
| MsSmoothAdditionalManifest |
Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for
this output group.
|
| MsSmoothEncryptionSettings |
If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
|
| MsSmoothGroupSettings |
Required when you set (Type) under (OutputGroups)>(OutputGroupSettings) to MS_SMOOTH_GROUP_SETTINGS.
|
| MxfSettings |
MXF settings
|
| NexGuardFileMarkerSettings |
For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking.
|
| NielsenConfiguration |
Settings for your Nielsen configuration.
|
| NielsenNonLinearWatermarkSettings |
Ignore these settings unless you are using Nielsen non-linear watermarking.
|
| NoiseReducer |
Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary.
|
| NoiseReducerFilterSettings |
Settings for a noise reducer filter
|
| NoiseReducerSpatialFilterSettings |
Noise reducer filter settings for spatial filter.
|
| NoiseReducerTemporalFilterSettings |
Noise reducer filter settings for temporal filter.
|
| OpusSettings |
Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.
|
| Output |
An output object describes the settings for a single output file or stream in an output group.
|
| OutputChannelMapping |
OutputChannel mapping settings.
|
| OutputDetail |
Details regarding output
|
| OutputGroup |
Group of outputs
|
| OutputGroupDetail |
Contains details about the output groups specified in the job settings.
|
| OutputGroupSettings |
Output Group settings, including type
|
| OutputSettings |
Specific settings for this type of output.
|
| PartnerWatermarking |
If you work with a third party video watermarking partner, use the group of settings that correspond with your
watermarking partner to include watermarks in your output.
|
| Preset |
A preset is a collection of preconfigured media conversion settings that you want MediaConvert to apply to the output
during the conversion process.
|
| PresetSettings |
Settings for preset
|
| ProresSettings |
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
|
| Queue |
You can use queues to manage the resources that are available to your AWS account for running multiple transcoding
jobs at the same time.
|
| QueueTransition |
Description of the source and destination queues between which the job has moved, along with the timestamp of the
move
|
| Rectangle |
Use Rectangle to identify a specific area of the video frame.
|
| RemixSettings |
Use Manual audio remixing (RemixSettings) to adjust audio levels for each audio channel in each output of your job.
|
| ReservationPlan |
Details about the pricing plan for your reserved queue.
|
| ReservationPlanSettings |
Details about the pricing plan for your reserved queue.
|
| ResourceTags |
The Amazon Resource Name (ARN) and tags for an AWS Elemental MediaConvert resource.
|
| S3DestinationAccessControl |
Optional.
|
| S3DestinationSettings |
Settings associated with S3 destination
|
| S3EncryptionSettings |
Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
|
| SccDestinationSettings |
Settings for SCC caption output.
|
| SpekeKeyProvider |
If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a
SPEKE-compliant key provider.
|
| SpekeKeyProviderCmaf |
If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider.
|
| StaticKeyProvider |
Use these settings to set up encryption with a static key provider.
|
| TagResourceRequest | |
| TagResourceResult | |
| TeletextDestinationSettings |
Settings for Teletext caption output
|
| TeletextSourceSettings |
Settings specific to Teletext caption sources, including Page number.
|
| TimecodeBurnin |
Timecode burn-in (TimecodeBurnIn)--Burns the output timecode and specified prefix into the output.
|
| TimecodeConfig |
These settings control how the service handles timecodes throughout the job.
|
| TimedMetadataInsertion |
Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in any HLS outputs.
|
| Timing |
Information about when jobs are submitted, started, and finished is specified in Unix epoch format in seconds.
|
| TrackSourceSettings |
Settings specific to caption sources that are specified by track number.
|
| TtmlDestinationSettings |
Settings specific to TTML caption outputs, including Pass style information (TtmlStylePassthrough).
|
| UntagResourceRequest | |
| UntagResourceResult | |
| UpdateJobTemplateRequest | |
| UpdateJobTemplateResult | |
| UpdatePresetRequest | |
| UpdatePresetResult | |
| UpdateQueueRequest | |
| UpdateQueueResult | |
| Vc3Settings |
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VC3
|
| VideoCodecSettings |
Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video
encoding.
|
| VideoDescription |
Settings for video outputs
|
| VideoDetail |
Contains details about the output's video stream
|
| VideoPreprocessor |
Find additional transcoding features under Preprocessors (VideoPreprocessors).
|
| VideoSelector |
Selector for video.
|
| VorbisSettings |
Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.
|
| Vp8Settings |
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.
|
| Vp9Settings |
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP9.
|
| WavSettings |
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
|
| Enum | Description |
|---|---|
| AacAudioDescriptionBroadcasterMix |
Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair.
|
| AacCodecProfile |
AAC Profile.
|
| AacCodingMode |
Mono (Audio Description), Mono, Stereo, or 5.1 channel layout.
|
| AacRateControlMode |
Rate Control Mode.
|
| AacRawFormat |
Enables LATM/LOAS AAC output.
|
| AacSpecification |
Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
|
| AacVbrQuality |
VBR Quality Level - Only used if rate_control_mode is VBR.
|
| Ac3BitstreamMode |
Specify the bitstream mode for the AC-3 stream that the encoder emits.
|
| Ac3CodingMode |
Dolby Digital coding mode.
|
| Ac3DynamicRangeCompressionProfile |
If set to FILM_STANDARD, adds dynamic range compression signaling to the output bitstream as defined in the Dolby
Digital specification.
|
| Ac3LfeFilter |
Applies a 120Hz lowpass filter to the LFE channel prior to encoding.
|
| Ac3MetadataControl |
When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this
audio data.
|
| AccelerationMode |
Specify whether the service runs your job with accelerated transcoding.
|
| AccelerationStatus |
Describes whether the current job is running with accelerated transcoding.
|
| AfdSignaling |
This setting only applies to H.264, H.265, and MPEG2 outputs.
|
| AlphaBehavior |
Ignore this setting unless this input is a QuickTime animation with an alpha channel.
|
| AncillaryConvert608To708 |
Specify whether this set of input captions appears in your outputs in both 608 and 708 format.
|
| AncillaryTerminateCaptions |
By default, the service terminates any unterminated captions at the end of each input.
|
| AntiAlias |
The anti-alias filter is automatically applied to all outputs.
|
| AudioChannelTag |
You can add a tag for this mono-channel audio track to mimic its placement in a multi-channel layout.
|
| AudioCodec |
Type of Audio codec.
|
| AudioDefaultSelection |
Enable this setting on one audio selector to set it as the default for the job.
|
| AudioLanguageCodeControl |
Specify which source for language code takes precedence for this audio track.
|
| AudioNormalizationAlgorithm |
Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness.
|
| AudioNormalizationAlgorithmControl |
When enabled the output audio is corrected using the chosen algorithm.
|
| AudioNormalizationLoudnessLogging |
If set to LOG, log each output's audio track loudness to a CSV file.
|
| AudioNormalizationPeakCalculation |
If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
|
| AudioSelectorType |
Specifies the type of the audio selector.
|
| AudioTypeControl |
When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the
output.
|
| Av1AdaptiveQuantization |
Specify the strength of any adaptive quantization filters that you enable.
|
| Av1FramerateControl |
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| Av1FramerateConversionAlgorithm |
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
| Av1RateControlMode |
'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR).
|
| Av1SpatialAdaptiveQuantization |
Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of
content complexity.
|
| AvcIntraClass |
Specify the AVC-Intra class of your output.
|
| AvcIntraFramerateControl |
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| AvcIntraFramerateConversionAlgorithm |
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
| AvcIntraInterlaceMode |
Choose the scan line type for the output.
|
| AvcIntraScanTypeConversionMode |
Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
|
| AvcIntraSlowPal |
Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
|
| AvcIntraTelecine |
When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is
interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
|
| AvcIntraUhdQualityTuningLevel |
Optional.
|
| BillingTagsSource |
The tag type that AWS Billing and Cost Management will use to sort your AWS Elemental MediaConvert costs on any
billing report that you set up.
|
| BurninSubtitleAlignment |
If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the
bottom center of the output.
|
| BurninSubtitleBackgroundColor |
Specifies the color of the rectangle behind the captions.
|
| BurninSubtitleFontColor |
Specifies the color of the burned-in captions.
|
| BurninSubtitleOutlineColor |
Specifies font outline color.
|
| BurninSubtitleShadowColor |
Specifies the color of the shadow cast by the captions.
|
| BurninSubtitleTeletextSpacing |
Only applies to jobs with input captions in Teletext or STL formats.
|
| CaptionDestinationType |
Specify the format for this set of captions on this output.
|
| CaptionSourceType |
Use Source (SourceType) to identify the format of your input captions.
|
| CmafClientCache |
Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag.
|
| CmafCodecSpecification |
Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
|
| CmafEncryptionType |
Specify the encryption scheme that you want the service to use when encrypting your CMAF segments.
|
| CmafInitializationVectorInManifest |
When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in
the HLS and DASH manifests.
|
| CmafKeyProviderType |
Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard.
|
| CmafManifestCompression |
When set to GZIP, compresses HLS playlist.
|
| CmafManifestDurationFormat |
Indicates whether the output manifest should use floating point values for segment duration.
|
| CmafMpdProfile |
Specify whether your DASH profile is on-demand or main.
|
| CmafSegmentControl |
When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length
and Segment Length.
|
| CmafStreamInfResolution |
Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
|
| CmafWriteDASHManifest |
When set to ENABLED, a DASH MPD manifest will be generated for this output.
|
| CmafWriteHLSManifest |
When set to ENABLED, an Apple HLS manifest will be generated for this output.
|
| CmafWriteSegmentTimelineInRepresentation |
When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest
shows precise segment durations.
|
| CmfcAudioDuration |
Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to
very small duration differences between video and audio.
|
| CmfcIFrameOnlyManifest |
Choose Include (INCLUDE) to have MediaConvert generate an HLS child manifest that lists only the I-frames for this
rendition, in addition to your regular manifest for this rendition.
|
| CmfcScte35Esam |
Use this setting only when you specify SCTE-35 markers from ESAM.
|
| CmfcScte35Source |
Ignore this setting unless you have SCTE-35 markers in your input video file.
|
| ColorMetadata |
Choose Insert (INSERT) for this setting to include color metadata in this output.
|
| ColorSpace |
If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the
default value Follow (FOLLOW).
|
| ColorSpaceConversion |
Specify the color space you want for this output.
|
| ColorSpaceUsage |
There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR
master display information settings(Hdr10Metadata).
|
| Commitment |
The length of the term of your reserved queue pricing plan commitment.
|
| ContainerType |
Container for this output.
|
| DashIsoHbbtvCompliance |
Supports HbbTV specification as indicated
|
| DashIsoMpdProfile |
Specify whether your DASH profile is on-demand or main.
|
| DashIsoPlaybackDeviceCompatibility |
This setting can improve the compatibility of your output with video players on obsolete devices.
|
| DashIsoSegmentControl |
When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length
and Segment Length.
|
| DashIsoWriteSegmentTimelineInRepresentation |
When you enable Precise segment duration in manifests (writeSegmentTimelineInRepresentation), your DASH manifest
shows precise segment durations.
|
| DecryptionMode |
Specify the encryption mode that you used to encrypt your input files.
|
| DeinterlaceAlgorithm |
Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE).
|
| DeinterlacerControl |
- When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive.
|
| DeinterlacerMode |
Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing.
|
| DescribeEndpointsMode |
Optional field, defaults to DEFAULT.
|
| DolbyVisionLevel6Mode |
Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
|
| DolbyVisionProfile |
In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5).
|
| DropFrameTimecode |
Applies only to 29.97 fps outputs.
|
| DvbSubtitleAlignment |
If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the
bottom center of the output.
|
| DvbSubtitleBackgroundColor |
Specifies the color of the rectangle behind the captions.
|
| DvbSubtitleFontColor |
Specifies the color of the burned-in captions.
|
| DvbSubtitleOutlineColor |
Specifies font outline color.
|
| DvbSubtitleShadowColor |
Specifies the color of the shadow cast by the captions.
|
| DvbSubtitleTeletextSpacing |
Only applies to jobs with input captions in Teletext or STL formats.
|
| DvbSubtitlingType |
Specify whether your DVB subtitles are standard or for hearing impaired.
|
| Eac3AtmosBitstreamMode |
Specify the bitstream mode for the E-AC-3 stream that the encoder emits.
|
| Eac3AtmosCodingMode |
The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
|
| Eac3AtmosDialogueIntelligence |
Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
|
| Eac3AtmosDynamicRangeCompressionLine |
Specify the absolute peak level for a signal with dynamic range compression.
|
| Eac3AtmosDynamicRangeCompressionRf |
Specify how the service limits the audio dynamic range when compressing the audio.
|
| Eac3AtmosMeteringMode |
Choose how the service meters the loudness of your audio.
|
| Eac3AtmosStereoDownmix |
Choose how the service does stereo downmixing.
|
| Eac3AtmosSurroundExMode |
Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and
right surround channels.
|
| Eac3AttenuationControl |
If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels.
|
| Eac3BitstreamMode |
Specify the bitstream mode for the E-AC-3 stream that the encoder emits.
|
| Eac3CodingMode |
Dolby Digital Plus coding mode.
|
| Eac3DcFilter |
Activates a DC highpass filter for all input channels.
|
| Eac3DynamicRangeCompressionLine |
Specify the absolute peak level for a signal with dynamic range compression.
|
| Eac3DynamicRangeCompressionRf |
Specify how the service limits the audio dynamic range when compressing the audio.
|
| Eac3LfeControl |
When encoding 3/2 audio, controls whether the LFE channel is enabled
|
| Eac3LfeFilter |
Applies a 120Hz lowpass filter to the LFE channel prior to encoding.
|
| Eac3MetadataControl |
When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this
audio data.
|
| Eac3PassthroughControl |
When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input.
|
| Eac3PhaseControl |
Controls the amount of phase-shift applied to the surround channels.
|
| Eac3StereoDownmix |
Choose how the service does stereo downmixing.
|
| Eac3SurroundExMode |
When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right
surround channels.
|
| Eac3SurroundMode |
When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
|
| EmbeddedConvert608To708 |
Specify whether this set of input captions appears in your outputs in both 608 and 708 format.
|
| EmbeddedTerminateCaptions |
By default, the service terminates any unterminated captions at the end of each input.
|
| F4vMoovPlacement |
If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for
progressive downloading.
|
| FileSourceConvert608To708 |
Specify whether this set of input captions appears in your outputs in both 608 and 708 format.
|
| FontScript |
Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the
script type.
|
| H264AdaptiveQuantization |
Keep the default value, Auto (AUTO), for this setting to have MediaConvert automatically apply the best types of
quantization for your video content.
|
| H264CodecLevel |
Specify an H.264 level that is consistent with your output video settings.
|
| H264CodecProfile |
H.264 Profile.
|
| H264DynamicSubGop |
Choose Adaptive to improve subjective video quality for high-motion content.
|
| H264EntropyEncoding |
Entropy encoding mode.
|
| H264FieldEncoding |
Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs.
|
| H264FlickerAdaptiveQuantization |
Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization.
|
| H264FramerateControl |
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| H264FramerateConversionAlgorithm |
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
| H264GopBReference |
If enable, use reference B frames for GOP structures that have B frames > 1.
|
| H264GopSizeUnits |
Indicates if the GOP Size in H264 is specified in frames or seconds.
|
| H264InterlaceMode |
Choose the scan line type for the output.
|
| H264ParControl |
Optional.
|
| H264QualityTuningLevel |
Optional.
|
| H264RateControlMode |
Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or
quality-defined variable bitrate (QVBR).
|
| H264RepeatPps |
Places a PPS header on each encoded picture, even if repeated.
|
| H264ScanTypeConversionMode |
Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
|
| H264SceneChangeDetect |
Enable this setting to insert I-frames at scene changes that the service automatically detects.
|
| H264SlowPal |
Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
|
| H264SpatialAdaptiveQuantization |
Only use this setting when you change the default value, Auto (AUTO), for the setting H264AdaptiveQuantization.
|
| H264Syntax |
Produces a bitstream compliant with SMPTE RP-2027.
|
| H264Telecine |
When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is
interlaced, you can optionally enable hard or soft telecine to create a smoother picture.
|
| H264TemporalAdaptiveQuantization |
Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization.
|
| H264UnregisteredSeiTimecode |
Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
|
| H265AdaptiveQuantization |
Specify the strength of any adaptive quantization filters that you enable.
|
| H265AlternateTransferFunctionSei |
Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer
Function (EOTF).
|
| H265CodecLevel |
H.265 Level.
|
| H265CodecProfile |
Represents the Profile and Tier, per the HEVC (H.265) specification.
|
| H265DynamicSubGop |
Choose Adaptive to improve subjective video quality for high-motion content.
|
| H265FlickerAdaptiveQuantization |
Enable this setting to have the encoder reduce I-frame pop.
|
| H265FramerateControl |
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| H265FramerateConversionAlgorithm |
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
| H265GopBReference |
If enable, use reference B frames for GOP structures that have B frames > 1.
|
| H265GopSizeUnits |
Indicates if the GOP Size in H265 is specified in frames or seconds.
|
| H265InterlaceMode |
Choose the scan line type for the output.
|
| H265ParControl |
Optional.
|
| H265QualityTuningLevel |
Optional.
|
| H265RateControlMode |
Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or
quality-defined variable bitrate (QVBR).
|
| H265SampleAdaptiveOffsetFilterMode |
Specify Sample Adaptive Offset (SAO) filter strength.
|
| H265ScanTypeConversionMode |
Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
|
| H265SceneChangeDetect |
Enable this setting to insert I-frames at scene changes that the service automatically detects.
|
| H265SlowPal |
Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
|
| H265SpatialAdaptiveQuantization |
Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of
content complexity.
|
| H265Telecine |
This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970.
|
| H265TemporalAdaptiveQuantization |
Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of
content complexity.
|
| H265TemporalIds |
Enables temporal layer identifiers in the encoded bitstream.
|
| H265Tiles |
Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
|
| H265UnregisteredSeiTimecode |
Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
|
| H265WriteMp4PackagingType |
If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting.
|
| HlsAdMarkers | |
| HlsAudioOnlyContainer |
Use this setting only in audio-only outputs.
|
| HlsAudioOnlyHeader |
Ignore this setting unless you are using FairPlay DRM with Verimatrix and you encounter playback issues.
|
| HlsAudioTrackType |
Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only
stream instead of video in low-bandwidth scenarios.
|
| HlsCaptionLanguageSetting |
Applies only to 608 Embedded output captions.
|
| HlsClientCache |
Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag.
|
| HlsCodecSpecification |
Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
|
| HlsDirectoryStructure |
Indicates whether segments should be placed in subdirectories.
|
| HlsEncryptionType |
Encrypts the segments with the given encryption scheme.
|
| HlsIFrameOnlyManifest |
Choose Include (INCLUDE) to have MediaConvert generate a child manifest that lists only the I-frames for this
rendition, in addition to your regular manifest for this rendition.
|
| HlsInitializationVectorInManifest |
The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks.
|
| HlsKeyProviderType |
Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard.
|
| HlsManifestCompression |
When set to GZIP, compresses HLS playlist.
|
| HlsManifestDurationFormat |
Indicates whether the output manifest should use floating point values for segment duration.
|
| HlsOfflineEncrypted |
Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist.
|
| HlsOutputSelection |
Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
|
| HlsProgramDateTime |
Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files.
|
| HlsSegmentControl |
When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index
segment for playback.
|
| HlsStreamInfResolution |
Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
|
| HlsTimedMetadataId3Frame |
Indicates ID3 frame that has the timecode.
|
| ImscStylePassthrough |
Keep this setting enabled to have MediaConvert use the font style and position information from the captions source
in the output.
|
| InputDeblockFilter |
Enable Deblock (InputDeblockFilter) to produce smoother motion in the output.
|
| InputDenoiseFilter |
Enable Denoise (InputDenoiseFilter) to filter noise from the input.
|
| InputFilterEnable |
Specify how the transcoding service applies the denoise and deblock filters.
|
| InputPsiControl |
Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans.
|
| InputRotate |
Use Rotate (InputRotate) to specify how the service rotates your video.
|
| InputScanType |
When you have a progressive segmented frame (PsF) input, use this setting to flag the input as PsF.
|
| InputTimecodeSource |
Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service
counts input video frames.
|
| JobPhase |
A job's phase can be PROBING, TRANSCODING OR UPLOADING
|
| JobStatus |
A job's status can be SUBMITTED, PROGRESSING, COMPLETE, CANCELED, or ERROR.
|
| JobTemplateListBy |
Optional.
|
| LanguageCode |
Specify the language, using the ISO 639-2 three-letter code listed at
https://www.loc.gov/standards/iso639-2/php/code_list.php.
|
| M2tsAudioBufferModel |
Selects between the DVB and ATSC buffer models for Dolby Digital audio.
|
| M2tsAudioDuration |
Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to
very small duration differences between video and audio.
|
| M2tsBufferModel |
Controls what buffer model to use for accurate interleaving.
|
| M2tsEbpAudioInterval |
When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4.
|
| M2tsEbpPlacement |
Selects which PIDs to place EBP markers on.
|
| M2tsEsRateInPes |
Controls whether to include the ES Rate field in the PES header.
|
| M2tsForceTsVideoEbpOrder |
Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your
video EBP markers.
|
| M2tsNielsenId3 |
If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag
will be inserted in the output.
|
| M2tsPcrControl |
When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream
(PES) header.
|
| M2tsRateMode |
When set to CBR, inserts null packets into transport stream to fill specified bitrate.
|
| M2tsScte35Source |
For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in
your input to also appear in this output.
|
| M2tsSegmentationMarkers |
Inserts segmentation markers at each segmentation_time period.
|
| M2tsSegmentationStyle |
The segmentation style parameter controls how segmentation markers are inserted into the transport stream.
|
| M3u8AudioDuration |
Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to
very small duration differences between video and audio.
|
| M3u8NielsenId3 |
If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag
will be inserted in the output.
|
| M3u8PcrControl |
When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream
(PES) header.
|
| M3u8Scte35Source |
For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in
your input to also appear in this output.
|
| MotionImageInsertionMode |
Choose the type of motion graphic asset that you are providing for your overlay.
|
| MotionImagePlayback |
Specify whether your motion graphic overlay repeats on a loop or plays only once.
|
| MovClapAtom |
When enabled, include 'clap' atom if appropriate for the video output settings.
|
| MovCslgAtom |
When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample)
box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1
amendment 1.
|
| MovMpeg2FourCCControl |
When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes.
|
| MovPaddingControl |
To make this output compatible with Omenon, keep the default value, OMNEON.
|
| MovReference |
Always keep the default value (SELF_CONTAINED) for this setting.
|
| Mp3RateControlMode |
Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
|
| Mp4CslgAtom |
When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample)
box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1
amendment 1.
|
| Mp4FreeSpaceBox |
Inserts a free-space box immediately after the moov box.
|
| Mp4MoovPlacement |
If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for
progressive downloading.
|
| MpdAccessibilityCaptionHints |
Optional.
|
| MpdAudioDuration |
Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to
very small duration differences between video and audio.
|
| MpdCaptionContainerType |
Use this setting only in DASH output groups that include sidecar TTML or IMSC captions.
|
| MpdScte35Esam |
Use this setting only when you specify SCTE-35 markers from ESAM.
|
| MpdScte35Source |
Ignore this setting unless you have SCTE-35 markers in your input video file.
|
| Mpeg2AdaptiveQuantization |
Specify the strength of any adaptive quantization filters that you enable.
|
| Mpeg2CodecLevel |
Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
|
| Mpeg2CodecProfile |
Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
|
| Mpeg2DynamicSubGop |
Choose Adaptive to improve subjective video quality for high-motion content.
|
| Mpeg2FramerateControl |
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| Mpeg2FramerateConversionAlgorithm |
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
| Mpeg2GopSizeUnits |
Indicates if the GOP Size in MPEG2 is specified in frames or seconds.
|
| Mpeg2InterlaceMode |
Choose the scan line type for the output.
|
| Mpeg2IntraDcPrecision |
Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients.
|
| Mpeg2ParControl |
Optional.
|
| Mpeg2QualityTuningLevel |
Optional.
|
| Mpeg2RateControlMode |
Use Rate control mode (Mpeg2RateControlMode) to specify whether the bitrate is variable (vbr) or constant (cbr).
|
| Mpeg2ScanTypeConversionMode |
Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
|
| Mpeg2SceneChangeDetect |
Enable this setting to insert I-frames at scene changes that the service automatically detects.
|
| Mpeg2SlowPal |
Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
|
| Mpeg2SpatialAdaptiveQuantization |
Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on spatial variation of
content complexity.
|
| Mpeg2Syntax |
Specify whether this output's video uses the D10 syntax.
|
| Mpeg2Telecine |
When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is
interlaced, you can optionally enable hard or soft telecine to create a smoother picture.
|
| Mpeg2TemporalAdaptiveQuantization |
Keep the default value, Enabled (ENABLED), to adjust quantization within each frame based on temporal variation of
content complexity.
|
| MsSmoothAudioDeduplication |
COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a
single audio stream.
|
| MsSmoothManifestEncoding |
Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest.
|
| MxfAfdSignaling |
Optional.
|
| MxfProfile |
Specify the MXF profile, also called shim, for this output.
|
| NielsenActiveWatermarkProcessType |
Choose the type of Nielsen watermarks that you want in your outputs.
|
| NielsenSourceWatermarkStatusType |
Required.
|
| NielsenUniqueTicPerAudioTrackType |
To create assets that have the same TIC values in each audio track, keep the default value Share TICs
(SAME_TICS_PER_TRACK).
|
| NoiseFilterPostTemporalSharpening |
Optional.
|
| NoiseReducerFilter |
Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions.
|
| Order |
Optional.
|
| OutputGroupType |
Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
|
| OutputSdt |
Selects method of inserting SDT information into output stream.
|
| PresetListBy |
Optional.
|
| PricingPlan |
Specifies whether the pricing plan for the queue is on-demand or reserved.
|
| ProresCodecProfile |
Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
|
| ProresFramerateControl |
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| ProresFramerateConversionAlgorithm |
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
| ProresInterlaceMode |
Choose the scan line type for the output.
|
| ProresParControl |
Optional.
|
| ProresScanTypeConversionMode |
Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
|
| ProresSlowPal |
Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
|
| ProresTelecine |
When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is
interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
|
| QueueListBy |
Optional.
|
| QueueStatus |
Queues can be ACTIVE or PAUSED.
|
| RenewalType |
Specifies whether the term of your reserved queue pricing plan is automatically extended (AUTO_RENEW) or expires
(EXPIRE) at the end of the term.
|
| ReservationPlanStatus |
Specifies whether the pricing plan for your reserved queue is ACTIVE or EXPIRED.
|
| RespondToAfd |
Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in
the input.
|
| S3ObjectCannedAcl |
Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
|
| S3ServerSideEncryptionType |
Specify how you want your data keys managed.
|
| ScalingBehavior |
Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio.
|
| SccDestinationFramerate |
Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output.
|
| SimulateReservedQueue |
Enable this setting when you run a test job to estimate how many reserved transcoding slots (RTS) you need.
|
| StatusUpdateInterval |
Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events.
|
| TeletextPageType |
A page type as defined in the standard ETSI EN 300 468, Table 94
|
| TimecodeBurninPosition |
Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode
on output video.
|
| TimecodeSource |
Use Source (TimecodeSource) to set how timecodes are handled within this job.
|
| TimedMetadata |
Applies only to HLS outputs.
|
| TtmlStylePassthrough |
Pass through style and position information from a TTML-like input source (TTML, SMPTE-TT) to the TTML output.
|
| Type | |
| Vc3Class |
Specify the VC3 class to choose the quality characteristics for this output.
|
| Vc3FramerateControl |
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| Vc3FramerateConversionAlgorithm |
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
| Vc3InterlaceMode |
Optional.
|
| Vc3ScanTypeConversionMode |
Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
|
| Vc3SlowPal |
Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
|
| Vc3Telecine |
When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is
interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
|
| VideoCodec |
Type of video codec
|
| VideoTimecodeInsertion |
Applies only to H.264, H.265, MPEG2, and ProRes outputs.
|
| Vp8FramerateControl |
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| Vp8FramerateConversionAlgorithm |
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
| Vp8ParControl |
Optional.
|
| Vp8QualityTuningLevel |
Optional.
|
| Vp8RateControlMode |
With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
|
| Vp9FramerateControl |
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| Vp9FramerateConversionAlgorithm |
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
| Vp9ParControl |
Optional.
|
| Vp9QualityTuningLevel |
Optional.
|
| Vp9RateControlMode |
With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.
|
| WatermarkingStrength |
Optional.
|
| WavFormat |
The service defaults to using RIFF for WAV outputs.
|
| Exception | Description |
|---|---|
| AWSMediaConvertException |
Base exception for all service exceptions thrown by AWS Elemental MediaConvert
|
| BadRequestException |
The service can't process your request because of a problem in the request.
|
| ConflictException |
The service couldn't complete your request because there is a conflict with the current state of the resource.
|
| ForbiddenException |
You don't have permissions for this action with the credentials you sent.
|
| InternalServerErrorException |
The service encountered an unexpected condition and can't fulfill your request.
|
| NotFoundException |
The resource you requested doesn't exist.
|
| TooManyRequestsException |
Too many requests have been sent in too short of a time.
|