AWSSecurityHub (AWS SDK for Java

All Known Subinterfaces:

AWSSecurityHubAsync

All Known Implementing Classes:

AbstractAWSSecurityHub, AbstractAWSSecurityHubAsync, AWSSecurityHubAsyncClient, AWSSecurityHubClient
```
@Generated(value="com.amazonaws:aws-java-sdk-code-generator")
public interface AWSSecurityHub
```
Interface for accessing AWS SecurityHub.
Note: Do not directly implement this interface, new methods are added to it regularly. Extend from AbstractAWSSecurityHub instead.

Security Hub provides you with a comprehensive view of the security state of your Amazon Web Services environment and resources. It also provides you with the readiness status of your environment based on controls from supported security standards. Security Hub collects security data from Amazon Web Services accounts, services, and integrated third-party products and helps you analyze security trends in your environment to identify the highest priority security issues. For more information about Security Hub, see the Security HubUser Guide .

When you use operations in the Security Hub API, the requests are executed only in the Amazon Web Services Region that is currently active or in the specific Amazon Web Services Region that you specify in your request. Any configuration or settings change that results from the operation is applied only to that Region. To make the same change in other Regions, execute the same command for each Region to apply the change to.

For example, if your Region is set to us-west-2, when you use CreateMembers to add a member account to Security Hub, the association of the member account with the administrator account is created only in the us-west-2 Region. Security Hub must be enabled for the member account in the same Region that the invitation was sent from.

The following throttling limits apply to using Security Hub API operations.
- BatchEnableStandards - RateLimit of 1 request per second, BurstLimit of 1 request per second.
- GetFindings - RateLimit of 3 requests per second. BurstLimit of 6 requests per second.
- UpdateFindings - RateLimit of 1 request per second. BurstLimit of 5 requests per second.
- UpdateStandardsControl - RateLimit of 1 request per second, BurstLimit of 5 requests per second.
- All other operations - RateLimit of 10 requests per second. BurstLimit of 30 requests per second.

Field Summary

Fields
Modifier and Type Field and Description

static String ENDPOINT_PREFIX
The region metadata service name for computing region endpoints.

Fields
Modifier and Type	Field and Description
`static String`	`ENDPOINT_PREFIX` The region metadata service name for computing region endpoints.

Method Summary

All Methods Instance Methods Abstract Methods Deprecated Methods
Modifier and Type	Method and Description
`AcceptAdministratorInvitationResult`	`acceptAdministratorInvitation(AcceptAdministratorInvitationRequest acceptAdministratorInvitationRequest)` Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
`AcceptInvitationResult`	`acceptInvitation(AcceptInvitationRequest acceptInvitationRequest)` Deprecated.
`BatchDisableStandardsResult`	`batchDisableStandards(BatchDisableStandardsRequest batchDisableStandardsRequest)` Disables the standards specified by the provided `StandardsSubscriptionArns`.
`BatchEnableStandardsResult`	`batchEnableStandards(BatchEnableStandardsRequest batchEnableStandardsRequest)` Enables the standards specified by the provided `StandardsArn`.
`BatchImportFindingsResult`	`batchImportFindings(BatchImportFindingsRequest batchImportFindingsRequest)` Imports security findings generated by a finding provider into Security Hub.
`BatchUpdateFindingsResult`	`batchUpdateFindings(BatchUpdateFindingsRequest batchUpdateFindingsRequest)` Used by Security Hub customers to update information about their investigation into a finding.
`CreateActionTargetResult`	`createActionTarget(CreateActionTargetRequest createActionTargetRequest)` Creates a custom action target in Security Hub.
`CreateFindingAggregatorResult`	`createFindingAggregator(CreateFindingAggregatorRequest createFindingAggregatorRequest)` Used to enable finding aggregation.
`CreateInsightResult`	`createInsight(CreateInsightRequest createInsightRequest)` Creates a custom insight in Security Hub.
`CreateMembersResult`	`createMembers(CreateMembersRequest createMembersRequest)` Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account.
`DeclineInvitationsResult`	`declineInvitations(DeclineInvitationsRequest declineInvitationsRequest)` Declines invitations to become a member account.
`DeleteActionTargetResult`	`deleteActionTarget(DeleteActionTargetRequest deleteActionTargetRequest)` Deletes a custom action target from Security Hub.
`DeleteFindingAggregatorResult`	`deleteFindingAggregator(DeleteFindingAggregatorRequest deleteFindingAggregatorRequest)` Deletes a finding aggregator.
`DeleteInsightResult`	`deleteInsight(DeleteInsightRequest deleteInsightRequest)` Deletes the insight specified by the `InsightArn`.
`DeleteInvitationsResult`	`deleteInvitations(DeleteInvitationsRequest deleteInvitationsRequest)` Deletes invitations received by the Amazon Web Services account to become a member account.
`DeleteMembersResult`	`deleteMembers(DeleteMembersRequest deleteMembersRequest)` Deletes the specified member accounts from Security Hub.
`DescribeActionTargetsResult`	`describeActionTargets(DescribeActionTargetsRequest describeActionTargetsRequest)` Returns a list of the custom action targets in Security Hub in your account.
`DescribeHubResult`	`describeHub(DescribeHubRequest describeHubRequest)` Returns details about the Hub resource in your account, including the `HubArn` and the time when you enabled Security Hub.
`DescribeOrganizationConfigurationResult`	`describeOrganizationConfiguration(DescribeOrganizationConfigurationRequest describeOrganizationConfigurationRequest)` Returns information about the Organizations configuration for Security Hub.
`DescribeProductsResult`	`describeProducts(DescribeProductsRequest describeProductsRequest)` Returns information about product integrations in Security Hub.
`DescribeStandardsResult`	`describeStandards(DescribeStandardsRequest describeStandardsRequest)` Returns a list of the available standards in Security Hub.
`DescribeStandardsControlsResult`	`describeStandardsControls(DescribeStandardsControlsRequest describeStandardsControlsRequest)` Returns a list of security standards controls.
`DisableImportFindingsForProductResult`	`disableImportFindingsForProduct(DisableImportFindingsForProductRequest disableImportFindingsForProductRequest)` Disables the integration of the specified product with Security Hub.
`DisableOrganizationAdminAccountResult`	`disableOrganizationAdminAccount(DisableOrganizationAdminAccountRequest disableOrganizationAdminAccountRequest)` Disables a Security Hub administrator account.
`DisableSecurityHubResult`	`disableSecurityHub(DisableSecurityHubRequest disableSecurityHubRequest)` Disables Security Hub in your account only in the current Region.
`DisassociateFromAdministratorAccountResult`	`disassociateFromAdministratorAccount(DisassociateFromAdministratorAccountRequest disassociateFromAdministratorAccountRequest)` Disassociates the current Security Hub member account from the associated administrator account.
`DisassociateFromMasterAccountResult`	`disassociateFromMasterAccount(DisassociateFromMasterAccountRequest disassociateFromMasterAccountRequest)` Deprecated.
`DisassociateMembersResult`	`disassociateMembers(DisassociateMembersRequest disassociateMembersRequest)` Disassociates the specified member accounts from the associated administrator account.
`EnableImportFindingsForProductResult`	`enableImportFindingsForProduct(EnableImportFindingsForProductRequest enableImportFindingsForProductRequest)` Enables the integration of a partner product with Security Hub.
`EnableOrganizationAdminAccountResult`	`enableOrganizationAdminAccount(EnableOrganizationAdminAccountRequest enableOrganizationAdminAccountRequest)` Designates the Security Hub administrator account for an organization.
`EnableSecurityHubResult`	`enableSecurityHub(EnableSecurityHubRequest enableSecurityHubRequest)` Enables Security Hub for your account in the current Region or the Region you specify in the request.
`GetAdministratorAccountResult`	`getAdministratorAccount(GetAdministratorAccountRequest getAdministratorAccountRequest)` Provides the details for the Security Hub administrator account for the current member account.
`ResponseMetadata`	`getCachedResponseMetadata(AmazonWebServiceRequest request)` Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected.
`GetEnabledStandardsResult`	`getEnabledStandards(GetEnabledStandardsRequest getEnabledStandardsRequest)` Returns a list of the standards that are currently enabled.
`GetFindingAggregatorResult`	`getFindingAggregator(GetFindingAggregatorRequest getFindingAggregatorRequest)` Returns the current finding aggregation configuration.
`GetFindingsResult`	`getFindings(GetFindingsRequest getFindingsRequest)` Returns a list of findings that match the specified criteria.
`GetInsightResultsResult`	`getInsightResults(GetInsightResultsRequest getInsightResultsRequest)` Lists the results of the Security Hub insight specified by the insight ARN.
`GetInsightsResult`	`getInsights(GetInsightsRequest getInsightsRequest)` Lists and describes insights for the specified insight ARNs.
`GetInvitationsCountResult`	`getInvitationsCount(GetInvitationsCountRequest getInvitationsCountRequest)` Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
`GetMasterAccountResult`	`getMasterAccount(GetMasterAccountRequest getMasterAccountRequest)` Deprecated.
`GetMembersResult`	`getMembers(GetMembersRequest getMembersRequest)` Returns the details for the Security Hub member accounts for the specified account IDs.
`InviteMembersResult`	`inviteMembers(InviteMembersRequest inviteMembersRequest)` Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.
`ListEnabledProductsForImportResult`	`listEnabledProductsForImport(ListEnabledProductsForImportRequest listEnabledProductsForImportRequest)` Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
`ListFindingAggregatorsResult`	`listFindingAggregators(ListFindingAggregatorsRequest listFindingAggregatorsRequest)` If finding aggregation is enabled, then `ListFindingAggregators` returns the ARN of the finding aggregator.
`ListInvitationsResult`	`listInvitations(ListInvitationsRequest listInvitationsRequest)` Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
`ListMembersResult`	`listMembers(ListMembersRequest listMembersRequest)` Lists details about all member accounts for the current Security Hub administrator account.
`ListOrganizationAdminAccountsResult`	`listOrganizationAdminAccounts(ListOrganizationAdminAccountsRequest listOrganizationAdminAccountsRequest)` Lists the Security Hub administrator accounts.
`ListTagsForResourceResult`	`listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)` Returns a list of tags associated with a resource.
`void`	`shutdown()` Shuts down this client object, releasing any resources that might be held open.
`TagResourceResult`	`tagResource(TagResourceRequest tagResourceRequest)` Adds one or more tags to a resource.
`UntagResourceResult`	`untagResource(UntagResourceRequest untagResourceRequest)` Removes one or more tags from a resource.
`UpdateActionTargetResult`	`updateActionTarget(UpdateActionTargetRequest updateActionTargetRequest)` Updates the name and description of a custom action target in Security Hub.
`UpdateFindingAggregatorResult`	`updateFindingAggregator(UpdateFindingAggregatorRequest updateFindingAggregatorRequest)` Updates the finding aggregation configuration.
`UpdateFindingsResult`	`updateFindings(UpdateFindingsRequest updateFindingsRequest)` `UpdateFindings` is deprecated.
`UpdateInsightResult`	`updateInsight(UpdateInsightRequest updateInsightRequest)` Updates the Security Hub insight identified by the specified insight ARN.
`UpdateOrganizationConfigurationResult`	`updateOrganizationConfiguration(UpdateOrganizationConfigurationRequest updateOrganizationConfigurationRequest)` Used to update the configuration related to Organizations.
`UpdateSecurityHubConfigurationResult`	`updateSecurityHubConfiguration(UpdateSecurityHubConfigurationRequest updateSecurityHubConfigurationRequest)` Updates configuration options for Security Hub.
`UpdateStandardsControlResult`	`updateStandardsControl(UpdateStandardsControlRequest updateStandardsControlRequest)` Used to control whether an individual security standard control is enabled or disabled.

- Field Detail
  - ENDPOINT_PREFIX
```
static final String ENDPOINT_PREFIX
```
    The region metadata service name for computing region endpoints. You can use this value to retrieve metadata (such as supported regions) of the service.
    
    See Also:
    
    RegionUtils.getRegionsForService(String), Constant Field Values
- Method Detail
  - acceptAdministratorInvitation
```
AcceptAdministratorInvitationResult acceptAdministratorInvitation(AcceptAdministratorInvitationRequest acceptAdministratorInvitationRequest)
```
    Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
    
    This operation is only used by member accounts that are not added through Organizations.
    
    When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.
    
    Parameters:
    
    acceptAdministratorInvitationRequest -
    
    Returns:
    
    Result of the AcceptAdministratorInvitation operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - acceptInvitation
```
@Deprecated
AcceptInvitationResult acceptInvitation(AcceptInvitationRequest acceptInvitationRequest)
```
    Deprecated.
    
    This method is deprecated. Instead, use AcceptAdministratorInvitation.
    
    The Security Hub console continues to use AcceptInvitation. It will eventually change to use AcceptAdministratorInvitation. Any IAM policies that specifically control access to this function must continue to use AcceptInvitation. You should also add AcceptAdministratorInvitation to your policies to ensure that the correct permissions are in place after the console begins to use AcceptAdministratorInvitation.
    
    Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
    
    This operation is only used by member accounts that are not added through Organizations.
    
    When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.
    
    Parameters:
    
    acceptInvitationRequest -
    
    Returns:
    
    Result of the AcceptInvitation operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - batchDisableStandards
```
BatchDisableStandardsResult batchDisableStandards(BatchDisableStandardsRequest batchDisableStandardsRequest)
```
    Disables the standards specified by the provided StandardsSubscriptionArns.
    
    For more information, see Security Standards section of the Security Hub User Guide.
    
    Parameters:
    
    batchDisableStandardsRequest -
    
    Returns:
    
    Result of the BatchDisableStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - batchEnableStandards
```
BatchEnableStandardsResult batchEnableStandards(BatchEnableStandardsRequest batchEnableStandardsRequest)
```
    Enables the standards specified by the provided StandardsArn. To obtain the ARN for a standard, use the DescribeStandards operation.
    
    For more information, see the Security Standards section of the Security Hub User Guide.
    
    Parameters:
    
    batchEnableStandardsRequest -
    
    Returns:
    
    Result of the BatchEnableStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - batchImportFindings
```
BatchImportFindingsResult batchImportFindings(BatchImportFindingsRequest batchImportFindingsRequest)
```
    Imports security findings generated by a finding provider into Security Hub. This action is requested by the finding provider to import its findings into Security Hub.
    
    BatchImportFindings must be called by one of the following:
    - The account that is associated with the findings. The identifier of the associated account is the value of the AwsAccountId attribute for the finding.
    - An account that is allow-listed for an official Security Hub partner integration.
    The maximum allowed size for a finding is 240 Kb. An error is returned for any finding larger than 240 Kb.
    
    After a finding is created, BatchImportFindings cannot be used to update the following finding fields and objects, which Security Hub customers use to manage their investigation workflow.
    - Note
    - UserDefinedFields
    - VerificationState
    - Workflow
    Finding providers also should not use BatchImportFindings to update the following attributes.
    - Confidence
    - Criticality
    - RelatedFindings
    - Severity
    - Types
    Instead, finding providers use FindingProviderFields to provide values for these attributes.
    Parameters:
    
    batchImportFindingsRequest -
    
    Returns:
    
    Result of the BatchImportFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - batchUpdateFindings
```
BatchUpdateFindingsResult batchUpdateFindings(BatchUpdateFindingsRequest batchUpdateFindingsRequest)
```
    Used by Security Hub customers to update information about their investigation into a finding. Requested by administrator accounts or member accounts. Administrator accounts can update findings for their account and their member accounts. Member accounts can update findings for their account.
    
    Updates from BatchUpdateFindings do not affect the value of UpdatedAt for a finding.
    
    Administrator and member accounts can use BatchUpdateFindings to update the following finding fields and objects.
    - Confidence
    - Criticality
    - Note
    - RelatedFindings
    - Severity
    - Types
    - UserDefinedFields
    - VerificationState
    - Workflow
    You can configure IAM policies to restrict access to fields and field values. For example, you might not want member accounts to be able to suppress findings or change the finding severity. See Configuring access to BatchUpdateFindings in the Security Hub User Guide.
    Parameters:
    
    batchUpdateFindingsRequest -
    
    Returns:
    
    Result of the BatchUpdateFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - createActionTarget
```
CreateActionTargetResult createActionTarget(CreateActionTargetRequest createActionTargetRequest)
```
    Creates a custom action target in Security Hub.
    
    You can use custom actions on findings and insights in Security Hub to trigger target actions in Amazon CloudWatch Events.
    
    Parameters:
    
    createActionTargetRequest -
    
    Returns:
    
    Result of the CreateActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    See Also:
    
    AWS API Documentation
  - createFindingAggregator
```
CreateFindingAggregatorResult createFindingAggregator(CreateFindingAggregatorRequest createFindingAggregatorRequest)
```
    Used to enable finding aggregation. Must be called from the aggregation Region.
    
    For more details about cross-Region replication, see Configuring finding aggregation in the Security Hub User Guide.
    
    Parameters:
    
    createFindingAggregatorRequest -
    
    Returns:
    
    Result of the CreateFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    See Also:
    
    AWS API Documentation
  - createInsight
```
CreateInsightResult createInsight(CreateInsightRequest createInsightRequest)
```
    Creates a custom insight in Security Hub. An insight is a consolidation of findings that relate to a security issue that requires attention or remediation.
    
    To group the related findings in the insight, use the GroupByAttribute.
    
    Parameters:
    
    createInsightRequest -
    
    Returns:
    
    Result of the CreateInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    See Also:
    
    AWS API Documentation
  - createMembers
```
CreateMembersResult createMembers(CreateMembersRequest createMembersRequest)
```
    Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account. If you are integrated with Organizations, then the administrator account is designated by the organization management account.
    
    CreateMembers is always used to add accounts that are not organization members.
    
    For accounts that are managed using Organizations, CreateMembers is only used in the following cases:
    - Security Hub is not configured to automatically add new organization accounts.
    - The account was disassociated or deleted in Security Hub.
    This action can only be used by an account that has Security Hub enabled. To enable Security Hub, you can use the EnableSecurityHub operation.
    
    For accounts that are not organization members, you create the account association and then send an invitation to the member account. To send the invitation, you use the InviteMembers operation. If the account owner accepts the invitation, the account becomes a member account in Security Hub.
    
    Accounts that are managed using Organizations do not receive an invitation. They automatically become a member account in Security Hub.
    - If the organization account does not have Security Hub enabled, then Security Hub and the default standards are automatically enabled. Note that Security Hub cannot be enabled automatically for the organization management account. The organization management account must enable Security Hub before the administrator account enables it as a member account.
    - For organization accounts that already have Security Hub enabled, Security Hub does not make any other changes to those accounts. It does not change their enabled standards or controls.
    A permissions policy is added that permits the administrator account to view the findings generated in the member account.
    
    To remove the association between the administrator and member accounts, use the DisassociateFromMasterAccount or DisassociateMembers operation.
    Parameters:
    
    createMembersRequest -
    
    Returns:
    
    Result of the CreateMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    See Also:
    
    AWS API Documentation
  - declineInvitations
```
DeclineInvitationsResult declineInvitations(DeclineInvitationsRequest declineInvitationsRequest)
```
    Declines invitations to become a member account.
    
    This operation is only used by accounts that are not part of an organization. Organization accounts do not receive invitations.
    
    Parameters:
    
    declineInvitationsRequest -
    
    Returns:
    
    Result of the DeclineInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - deleteActionTarget
```
DeleteActionTargetResult deleteActionTarget(DeleteActionTargetRequest deleteActionTargetRequest)
```
    Deletes a custom action target from Security Hub.
    
    Deleting a custom action target does not affect any findings or insights that were already sent to Amazon CloudWatch Events using the custom action.
    
    Parameters:
    
    deleteActionTargetRequest -
    
    Returns:
    
    Result of the DeleteActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - deleteFindingAggregator
```
DeleteFindingAggregatorResult deleteFindingAggregator(DeleteFindingAggregatorRequest deleteFindingAggregatorRequest)
```
    Deletes a finding aggregator. When you delete the finding aggregator, you stop finding aggregation.
    
    When you stop finding aggregation, findings that were already aggregated to the aggregation Region are still visible from the aggregation Region. New findings and finding updates are not aggregated.
    
    Parameters:
    
    deleteFindingAggregatorRequest -
    
    Returns:
    
    Result of the DeleteFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - deleteInsight
```
DeleteInsightResult deleteInsight(DeleteInsightRequest deleteInsightRequest)
```
    Deletes the insight specified by the InsightArn.
    
    Parameters:
    
    deleteInsightRequest -
    
    Returns:
    
    Result of the DeleteInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - deleteInvitations
```
DeleteInvitationsResult deleteInvitations(DeleteInvitationsRequest deleteInvitationsRequest)
```
    Deletes invitations received by the Amazon Web Services account to become a member account.
    
    This operation is only used by accounts that are not part of an organization. Organization accounts do not receive invitations.
    
    Parameters:
    
    deleteInvitationsRequest -
    
    Returns:
    
    Result of the DeleteInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - deleteMembers
```
DeleteMembersResult deleteMembers(DeleteMembersRequest deleteMembersRequest)
```
    Deletes the specified member accounts from Security Hub.
    
    Can be used to delete member accounts that belong to an organization as well as member accounts that were invited manually.
    
    Parameters:
    
    deleteMembersRequest -
    
    Returns:
    
    Result of the DeleteMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - describeActionTargets
```
DescribeActionTargetsResult describeActionTargets(DescribeActionTargetsRequest describeActionTargetsRequest)
```
    Returns a list of the custom action targets in Security Hub in your account.
    
    Parameters:
    
    describeActionTargetsRequest -
    
    Returns:
    
    Result of the DescribeActionTargets operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - describeHub
```
DescribeHubResult describeHub(DescribeHubRequest describeHubRequest)
```
    Returns details about the Hub resource in your account, including the HubArn and the time when you enabled Security Hub.
    
    Parameters:
    
    describeHubRequest -
    
    Returns:
    
    Result of the DescribeHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - describeOrganizationConfiguration
```
DescribeOrganizationConfigurationResult describeOrganizationConfiguration(DescribeOrganizationConfigurationRequest describeOrganizationConfigurationRequest)
```
    Returns information about the Organizations configuration for Security Hub. Can only be called from a Security Hub administrator account.
    
    Parameters:
    
    describeOrganizationConfigurationRequest -
    
    Returns:
    
    Result of the DescribeOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - describeProducts
```
DescribeProductsResult describeProducts(DescribeProductsRequest describeProductsRequest)
```
    Returns information about product integrations in Security Hub.
    
    You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.
    
    If you do not provide an integration ARN, then the results include all of the available product integrations.
    
    Parameters:
    
    describeProductsRequest -
    
    Returns:
    
    Result of the DescribeProducts operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    See Also:
    
    AWS API Documentation
  - describeStandards
```
DescribeStandardsResult describeStandards(DescribeStandardsRequest describeStandardsRequest)
```
    Returns a list of the available standards in Security Hub.
    
    For each standard, the results include the standard ARN, the name, and a description.
    
    Parameters:
    
    describeStandardsRequest -
    
    Returns:
    
    Result of the DescribeStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - describeStandardsControls
```
DescribeStandardsControlsResult describeStandardsControls(DescribeStandardsControlsRequest describeStandardsControlsRequest)
```
    Returns a list of security standards controls.
    
    For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.
    
    Parameters:
    
    describeStandardsControlsRequest -
    
    Returns:
    
    Result of the DescribeStandardsControls operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - disableImportFindingsForProduct
```
DisableImportFindingsForProductResult disableImportFindingsForProduct(DisableImportFindingsForProductRequest disableImportFindingsForProductRequest)
```
    Disables the integration of the specified product with Security Hub. After the integration is disabled, findings from that product are no longer sent to Security Hub.
    
    Parameters:
    
    disableImportFindingsForProductRequest -
    
    Returns:
    
    Result of the DisableImportFindingsForProduct operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - disableOrganizationAdminAccount
```
DisableOrganizationAdminAccountResult disableOrganizationAdminAccount(DisableOrganizationAdminAccountRequest disableOrganizationAdminAccountRequest)
```
    Disables a Security Hub administrator account. Can only be called by the organization management account.
    
    Parameters:
    
    disableOrganizationAdminAccountRequest -
    
    Returns:
    
    Result of the DisableOrganizationAdminAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - disableSecurityHub
```
DisableSecurityHubResult disableSecurityHub(DisableSecurityHubRequest disableSecurityHubRequest)
```
    Disables Security Hub in your account only in the current Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub.
    
    When you disable Security Hub for an administrator account, it doesn't disable Security Hub for any associated member accounts.
    
    When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed.
    
    If you want to save your existing findings, you must export them before you disable Security Hub.
    
    Parameters:
    
    disableSecurityHubRequest -
    
    Returns:
    
    Result of the DisableSecurityHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - disassociateFromAdministratorAccount
```
DisassociateFromAdministratorAccountResult disassociateFromAdministratorAccount(DisassociateFromAdministratorAccountRequest disassociateFromAdministratorAccountRequest)
```
    Disassociates the current Security Hub member account from the associated administrator account.
    
    This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.
    
    Parameters:
    
    disassociateFromAdministratorAccountRequest -
    
    Returns:
    
    Result of the DisassociateFromAdministratorAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - disassociateFromMasterAccount
```
@Deprecated
DisassociateFromMasterAccountResult disassociateFromMasterAccount(DisassociateFromMasterAccountRequest disassociateFromMasterAccountRequest)
```
    Deprecated.
    
    This method is deprecated. Instead, use DisassociateFromAdministratorAccount.
    
    The Security Hub console continues to use DisassociateFromMasterAccount. It will eventually change to use DisassociateFromAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use DisassociateFromMasterAccount. You should also add DisassociateFromAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use DisassociateFromAdministratorAccount.
    
    Disassociates the current Security Hub member account from the associated administrator account.
    
    This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.
    
    Parameters:
    
    disassociateFromMasterAccountRequest -
    
    Returns:
    
    Result of the DisassociateFromMasterAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - disassociateMembers
```
DisassociateMembersResult disassociateMembers(DisassociateMembersRequest disassociateMembersRequest)
```
    Disassociates the specified member accounts from the associated administrator account.
    
    Can be used to disassociate both accounts that are managed using Organizations and accounts that were invited manually.
    
    Parameters:
    
    disassociateMembersRequest -
    
    Returns:
    
    Result of the DisassociateMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - enableImportFindingsForProduct
```
EnableImportFindingsForProductResult enableImportFindingsForProduct(EnableImportFindingsForProductRequest enableImportFindingsForProductRequest)
```
    Enables the integration of a partner product with Security Hub. Integrated products send findings to Security Hub.
    
    When you enable a product integration, a permissions policy that grants permission for the product to send findings to Security Hub is applied.
    
    Parameters:
    
    enableImportFindingsForProductRequest -
    
    Returns:
    
    Result of the EnableImportFindingsForProduct operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - enableOrganizationAdminAccount
```
EnableOrganizationAdminAccountResult enableOrganizationAdminAccount(EnableOrganizationAdminAccountRequest enableOrganizationAdminAccountRequest)
```
    Designates the Security Hub administrator account for an organization. Can only be called by the organization management account.
    
    Parameters:
    
    enableOrganizationAdminAccountRequest -
    
    Returns:
    
    Result of the EnableOrganizationAdminAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - enableSecurityHub
```
EnableSecurityHubResult enableSecurityHub(EnableSecurityHubRequest enableSecurityHubRequest)
```
    Enables Security Hub for your account in the current Region or the Region you specify in the request.
    
    When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub.
    
    When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards.
    - CIS Amazon Web Services Foundations
    - Amazon Web Services Foundational Security Best Practices
    You do not enable the Payment Card Industry Data Security Standard (PCI DSS) standard.
    
    To not enable the automatically enabled standards, set EnableDefaultStandards to false.
    
    After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation.
    
    To learn more, see the setup information in the Security Hub User Guide.
    Parameters:
    
    enableSecurityHubRequest -
    
    Returns:
    
    Result of the EnableSecurityHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    See Also:
    
    AWS API Documentation
  - getAdministratorAccount
```
GetAdministratorAccountResult getAdministratorAccount(GetAdministratorAccountRequest getAdministratorAccountRequest)
```
    Provides the details for the Security Hub administrator account for the current member account.
    
    Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
    
    Parameters:
    
    getAdministratorAccountRequest -
    
    Returns:
    
    Result of the GetAdministratorAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - getEnabledStandards
```
GetEnabledStandardsResult getEnabledStandards(GetEnabledStandardsRequest getEnabledStandardsRequest)
```
    Returns a list of the standards that are currently enabled.
    
    Parameters:
    
    getEnabledStandardsRequest -
    
    Returns:
    
    Result of the GetEnabledStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - getFindingAggregator
```
GetFindingAggregatorResult getFindingAggregator(GetFindingAggregatorRequest getFindingAggregatorRequest)
```
    Returns the current finding aggregation configuration.
    
    Parameters:
    
    getFindingAggregatorRequest -
    
    Returns:
    
    Result of the GetFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - getFindings
```
GetFindingsResult getFindings(GetFindingsRequest getFindingsRequest)
```
    Returns a list of findings that match the specified criteria.
    
    If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.
    
    Parameters:
    
    getFindingsRequest -
    
    Returns:
    
    Result of the GetFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - getInsightResults
```
GetInsightResultsResult getInsightResults(GetInsightResultsRequest getInsightResultsRequest)
```
    Lists the results of the Security Hub insight specified by the insight ARN.
    
    Parameters:
    
    getInsightResultsRequest -
    
    Returns:
    
    Result of the GetInsightResults operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - getInsights
```
GetInsightsResult getInsights(GetInsightsRequest getInsightsRequest)
```
    Lists and describes insights for the specified insight ARNs.
    
    Parameters:
    
    getInsightsRequest -
    
    Returns:
    
    Result of the GetInsights operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - getInvitationsCount
```
GetInvitationsCountResult getInvitationsCount(GetInvitationsCountRequest getInvitationsCountRequest)
```
    Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
    
    Parameters:
    
    getInvitationsCountRequest -
    
    Returns:
    
    Result of the GetInvitationsCount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - getMasterAccount
```
@Deprecated
GetMasterAccountResult getMasterAccount(GetMasterAccountRequest getMasterAccountRequest)
```
    Deprecated.
    
    This method is deprecated. Instead, use GetAdministratorAccount.
    
    The Security Hub console continues to use GetMasterAccount. It will eventually change to use GetAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use GetMasterAccount. You should also add GetAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use GetAdministratorAccount.
    
    Provides the details for the Security Hub administrator account for the current member account.
    
    Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
    
    Parameters:
    
    getMasterAccountRequest -
    
    Returns:
    
    Result of the GetMasterAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - getMembers
```
GetMembersResult getMembers(GetMembersRequest getMembersRequest)
```
    Returns the details for the Security Hub member accounts for the specified account IDs.
    
    An administrator account can be either the delegated Security Hub administrator account for an organization or an administrator account that enabled Security Hub manually.
    
    The results include both member accounts that are managed using Organizations and accounts that were invited manually.
    
    Parameters:
    
    getMembersRequest -
    
    Returns:
    
    Result of the GetMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - inviteMembers
```
InviteMembersResult inviteMembers(InviteMembersRequest inviteMembersRequest)
```
    Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.
    
    This operation is only used to invite accounts that do not belong to an organization. Organization accounts do not receive invitations.
    
    Before you can use this action to invite a member, you must first use the CreateMembers action to create the member account in Security Hub.
    
    When the account owner enables Security Hub and accepts the invitation to become a member account, the administrator account can view the findings generated from the member account.
    
    Parameters:
    
    inviteMembersRequest -
    
    Returns:
    
    Result of the InviteMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - listEnabledProductsForImport
```
ListEnabledProductsForImportResult listEnabledProductsForImport(ListEnabledProductsForImportRequest listEnabledProductsForImportRequest)
```
    Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
    
    Parameters:
    
    listEnabledProductsForImportRequest -
    
    Returns:
    
    Result of the ListEnabledProductsForImport operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - listFindingAggregators
```
ListFindingAggregatorsResult listFindingAggregators(ListFindingAggregatorsRequest listFindingAggregatorsRequest)
```
    If finding aggregation is enabled, then ListFindingAggregators returns the ARN of the finding aggregator. You can run this operation from any Region.
    
    Parameters:
    
    listFindingAggregatorsRequest -
    
    Returns:
    
    Result of the ListFindingAggregators operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    See Also:
    
    AWS API Documentation
  - listInvitations
```
ListInvitationsResult listInvitations(ListInvitationsRequest listInvitationsRequest)
```
    Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
    
    This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.
    
    Parameters:
    
    listInvitationsRequest -
    
    Returns:
    
    Result of the ListInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - listMembers
```
ListMembersResult listMembers(ListMembersRequest listMembersRequest)
```
    Lists details about all member accounts for the current Security Hub administrator account.
    
    The results include both member accounts that belong to an organization and member accounts that were invited manually.
    
    Parameters:
    
    listMembersRequest -
    
    Returns:
    
    Result of the ListMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - listOrganizationAdminAccounts
```
ListOrganizationAdminAccountsResult listOrganizationAdminAccounts(ListOrganizationAdminAccountsRequest listOrganizationAdminAccountsRequest)
```
    Lists the Security Hub administrator accounts. Can only be called by the organization management account.
    
    Parameters:
    
    listOrganizationAdminAccountsRequest -
    
    Returns:
    
    Result of the ListOrganizationAdminAccounts operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
ListTagsForResourceResult listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
```
    Returns a list of tags associated with a resource.
    
    Parameters:
    
    listTagsForResourceRequest -
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
TagResourceResult tagResource(TagResourceRequest tagResourceRequest)
```
    Adds one or more tags to a resource.
    
    Parameters:
    
    tagResourceRequest -
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
UntagResourceResult untagResource(UntagResourceRequest untagResourceRequest)
```
    Removes one or more tags from a resource.
    
    Parameters:
    
    untagResourceRequest -
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateActionTarget
```
UpdateActionTargetResult updateActionTarget(UpdateActionTargetRequest updateActionTargetRequest)
```
    Updates the name and description of a custom action target in Security Hub.
    
    Parameters:
    
    updateActionTargetRequest -
    
    Returns:
    
    Result of the UpdateActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateFindingAggregator
```
UpdateFindingAggregatorResult updateFindingAggregator(UpdateFindingAggregatorRequest updateFindingAggregatorRequest)
```
    Updates the finding aggregation configuration. Used to update the Region linking mode and the list of included or excluded Regions. You cannot use UpdateFindingAggregator to change the aggregation Region.
    
    You must run UpdateFindingAggregator from the current aggregation Region.
    
    Parameters:
    
    updateFindingAggregatorRequest -
    
    Returns:
    
    Result of the UpdateFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateFindings
```
UpdateFindingsResult updateFindings(UpdateFindingsRequest updateFindingsRequest)
```
    UpdateFindings is deprecated. Instead of UpdateFindings, use BatchUpdateFindings.
    
    Updates the Note and RecordState of the Security Hub-aggregated findings that the filter attributes specify. Any member account that can view the finding also sees the update to the finding.
    
    Parameters:
    
    updateFindingsRequest -
    
    Returns:
    
    Result of the UpdateFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateInsight
```
UpdateInsightResult updateInsight(UpdateInsightRequest updateInsightRequest)
```
    Updates the Security Hub insight identified by the specified insight ARN.
    
    Parameters:
    
    updateInsightRequest -
    
    Returns:
    
    Result of the UpdateInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateOrganizationConfiguration
```
UpdateOrganizationConfigurationResult updateOrganizationConfiguration(UpdateOrganizationConfigurationRequest updateOrganizationConfigurationRequest)
```
    Used to update the configuration related to Organizations. Can only be called from a Security Hub administrator account.
    
    Parameters:
    
    updateOrganizationConfigurationRequest -
    
    Returns:
    
    Result of the UpdateOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - updateSecurityHubConfiguration
```
UpdateSecurityHubConfigurationResult updateSecurityHubConfiguration(UpdateSecurityHubConfigurationRequest updateSecurityHubConfigurationRequest)
```
    Updates configuration options for Security Hub.
    
    Parameters:
    
    updateSecurityHubConfigurationRequest -
    
    Returns:
    
    Result of the UpdateSecurityHubConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateStandardsControl
```
UpdateStandardsControlResult updateStandardsControl(UpdateStandardsControlRequest updateStandardsControlRequest)
```
    Used to control whether an individual security standard control is enabled or disabled.
    
    Parameters:
    
    updateStandardsControlRequest -
    
    Returns:
    
    Result of the UpdateStandardsControl operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - shutdown
```
void shutdown()
```
    Shuts down this client object, releasing any resources that might be held open. This is an optional method, and callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client has been shutdown, it should not be used to make any more requests.
  - getCachedResponseMetadata
```
ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)
```
    Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected. This data isn't considered part of the result data returned by an operation, so it's available through this separate, diagnostic interface.
    Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.
    
    Parameters:
    
    request - The originally executed request.
    
    Returns:
    
    The response metadata for the specified request, or null if none is available.

Did this page help you?

Interface AWSSecurityHub

Field Summary

Method Summary

Field Detail

ENDPOINT_PREFIX

Method Detail

acceptAdministratorInvitation

acceptInvitation

batchDisableStandards

batchEnableStandards

batchImportFindings

batchUpdateFindings

createActionTarget

createFindingAggregator

createInsight

createMembers

declineInvitations

deleteActionTarget

deleteFindingAggregator

deleteInsight

deleteInvitations

deleteMembers

describeActionTargets

describeHub

describeOrganizationConfiguration

describeProducts

describeStandards

describeStandardsControls

disableImportFindingsForProduct

disableOrganizationAdminAccount

disableSecurityHub

disassociateFromAdministratorAccount

disassociateFromMasterAccount

disassociateMembers

enableImportFindingsForProduct

enableOrganizationAdminAccount

enableSecurityHub

getAdministratorAccount

getEnabledStandards

getFindingAggregator

getFindings

getInsightResults

getInsights

getInvitationsCount

getMasterAccount

getMembers

inviteMembers

listEnabledProductsForImport

listFindingAggregators

listInvitations

listMembers

listOrganizationAdminAccounts

listTagsForResource

tagResource

untagResource

updateActionTarget

updateFindingAggregator

updateFindings

updateInsight

updateOrganizationConfiguration

updateSecurityHubConfiguration

updateStandardsControl

shutdown

getCachedResponseMetadata