Eac3AtmosSettings (AWS SDK for Java

java.lang.Object
- com.amazonaws.services.mediaconvert.model.Eac3AtmosSettings

All Implemented Interfaces:

StructuredPojo, Serializable, Cloneable
```
@Generated(value="com.amazonaws:aws-java-sdk-code-generator")
public class Eac3AtmosSettings
extends Object
implements Serializable, Cloneable, StructuredPojo
```
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.

See Also:

AWS API Documentation, Serialized Form

Constructor Summary

Constructors
Constructor and Description

Eac3AtmosSettings()

Constructors
Constructor and Description
`Eac3AtmosSettings()`

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`Eac3AtmosSettings`	`clone()`
`boolean`	`equals(Object obj)`
`Integer`	`getBitrate()` Specify the average bitrate for this output in bits per second.
`String`	`getBitstreamMode()` Specify the bitstream mode for the E-AC-3 stream that the encoder emits.
`String`	`getCodingMode()` The coding mode for Dolby Digital Plus JOC (Atmos).
`String`	`getDialogueIntelligence()` Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
`String`	`getDownmixControl()` Specify whether MediaConvert should use any downmix metadata from your input file.
`String`	`getDynamicRangeCompressionLine()` Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode.
`String`	`getDynamicRangeCompressionRf()` Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode.
`String`	`getDynamicRangeControl()` Specify whether MediaConvert should use any dynamic range control metadata from your input file.
`Double`	`getLoRoCenterMixLevel()` Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center).
`Double`	`getLoRoSurroundMixLevel()` Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround).
`Double`	`getLtRtCenterMixLevel()` Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center).
`Double`	`getLtRtSurroundMixLevel()` Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround).
`String`	`getMeteringMode()` Choose how the service meters the loudness of your audio.
`Integer`	`getSampleRate()` This value is always 48000.
`Integer`	`getSpeechThreshold()` Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness.
`String`	`getStereoDownmix()` Choose how the service does stereo downmixing.
`String`	`getSurroundExMode()` Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
`int`	`hashCode()`
`void`	`marshall(ProtocolMarshaller protocolMarshaller)` Marshalls this structured data using the given `ProtocolMarshaller`.
`void`	`setBitrate(Integer bitrate)` Specify the average bitrate for this output in bits per second.
`void`	`setBitstreamMode(String bitstreamMode)` Specify the bitstream mode for the E-AC-3 stream that the encoder emits.
`void`	`setCodingMode(String codingMode)` The coding mode for Dolby Digital Plus JOC (Atmos).
`void`	`setDialogueIntelligence(String dialogueIntelligence)` Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
`void`	`setDownmixControl(String downmixControl)` Specify whether MediaConvert should use any downmix metadata from your input file.
`void`	`setDynamicRangeCompressionLine(String dynamicRangeCompressionLine)` Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode.
`void`	`setDynamicRangeCompressionRf(String dynamicRangeCompressionRf)` Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode.
`void`	`setDynamicRangeControl(String dynamicRangeControl)` Specify whether MediaConvert should use any dynamic range control metadata from your input file.
`void`	`setLoRoCenterMixLevel(Double loRoCenterMixLevel)` Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center).
`void`	`setLoRoSurroundMixLevel(Double loRoSurroundMixLevel)` Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround).
`void`	`setLtRtCenterMixLevel(Double ltRtCenterMixLevel)` Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center).
`void`	`setLtRtSurroundMixLevel(Double ltRtSurroundMixLevel)` Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround).
`void`	`setMeteringMode(String meteringMode)` Choose how the service meters the loudness of your audio.
`void`	`setSampleRate(Integer sampleRate)` This value is always 48000.
`void`	`setSpeechThreshold(Integer speechThreshold)` Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness.
`void`	`setStereoDownmix(String stereoDownmix)` Choose how the service does stereo downmixing.
`void`	`setSurroundExMode(String surroundExMode)` Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
`String`	`toString()` Returns a string representation of this object.
`Eac3AtmosSettings`	`withBitrate(Integer bitrate)` Specify the average bitrate for this output in bits per second.
`Eac3AtmosSettings`	`withBitstreamMode(Eac3AtmosBitstreamMode bitstreamMode)` Specify the bitstream mode for the E-AC-3 stream that the encoder emits.
`Eac3AtmosSettings`	`withBitstreamMode(String bitstreamMode)` Specify the bitstream mode for the E-AC-3 stream that the encoder emits.
`Eac3AtmosSettings`	`withCodingMode(Eac3AtmosCodingMode codingMode)` The coding mode for Dolby Digital Plus JOC (Atmos).
`Eac3AtmosSettings`	`withCodingMode(String codingMode)` The coding mode for Dolby Digital Plus JOC (Atmos).
`Eac3AtmosSettings`	`withDialogueIntelligence(Eac3AtmosDialogueIntelligence dialogueIntelligence)` Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
`Eac3AtmosSettings`	`withDialogueIntelligence(String dialogueIntelligence)` Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
`Eac3AtmosSettings`	`withDownmixControl(Eac3AtmosDownmixControl downmixControl)` Specify whether MediaConvert should use any downmix metadata from your input file.
`Eac3AtmosSettings`	`withDownmixControl(String downmixControl)` Specify whether MediaConvert should use any downmix metadata from your input file.
`Eac3AtmosSettings`	`withDynamicRangeCompressionLine(Eac3AtmosDynamicRangeCompressionLine dynamicRangeCompressionLine)` Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode.
`Eac3AtmosSettings`	`withDynamicRangeCompressionLine(String dynamicRangeCompressionLine)` Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode.
`Eac3AtmosSettings`	`withDynamicRangeCompressionRf(Eac3AtmosDynamicRangeCompressionRf dynamicRangeCompressionRf)` Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode.
`Eac3AtmosSettings`	`withDynamicRangeCompressionRf(String dynamicRangeCompressionRf)` Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode.
`Eac3AtmosSettings`	`withDynamicRangeControl(Eac3AtmosDynamicRangeControl dynamicRangeControl)` Specify whether MediaConvert should use any dynamic range control metadata from your input file.
`Eac3AtmosSettings`	`withDynamicRangeControl(String dynamicRangeControl)` Specify whether MediaConvert should use any dynamic range control metadata from your input file.
`Eac3AtmosSettings`	`withLoRoCenterMixLevel(Double loRoCenterMixLevel)` Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center).
`Eac3AtmosSettings`	`withLoRoSurroundMixLevel(Double loRoSurroundMixLevel)` Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround).
`Eac3AtmosSettings`	`withLtRtCenterMixLevel(Double ltRtCenterMixLevel)` Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center).
`Eac3AtmosSettings`	`withLtRtSurroundMixLevel(Double ltRtSurroundMixLevel)` Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround).
`Eac3AtmosSettings`	`withMeteringMode(Eac3AtmosMeteringMode meteringMode)` Choose how the service meters the loudness of your audio.
`Eac3AtmosSettings`	`withMeteringMode(String meteringMode)` Choose how the service meters the loudness of your audio.
`Eac3AtmosSettings`	`withSampleRate(Integer sampleRate)` This value is always 48000.
`Eac3AtmosSettings`	`withSpeechThreshold(Integer speechThreshold)` Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness.
`Eac3AtmosSettings`	`withStereoDownmix(Eac3AtmosStereoDownmix stereoDownmix)` Choose how the service does stereo downmixing.
`Eac3AtmosSettings`	`withStereoDownmix(String stereoDownmix)` Choose how the service does stereo downmixing.
`Eac3AtmosSettings`	`withSurroundExMode(Eac3AtmosSurroundExMode surroundExMode)` Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
`Eac3AtmosSettings`	`withSurroundExMode(String surroundExMode)` Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.

Methods inherited from class java.lang.Object
getClass, notify, notifyAll, wait, wait, wait

- Constructor Detail
  - Eac3AtmosSettings
```
public Eac3AtmosSettings()
```
- Method Detail
  - setBitrate
```
public void setBitrate(Integer bitrate)
```
    Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.
    
    Parameters:
    
    bitrate - Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.
  - getBitrate
```
public Integer getBitrate()
```
    Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.
    
    Returns:
    
    Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.
  - withBitrate
```
public Eac3AtmosSettings withBitrate(Integer bitrate)
```
    Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.
    
    Parameters:
    
    bitrate - Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setBitstreamMode
```
public void setBitstreamMode(String bitstreamMode)
```
    Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
    
    Parameters:
    
    bitstreamMode - Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
    
    See Also:
    
    Eac3AtmosBitstreamMode
  - getBitstreamMode
```
public String getBitstreamMode()
```
    Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
    
    Returns:
    
    Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
    
    See Also:
    
    Eac3AtmosBitstreamMode
  - withBitstreamMode
```
public Eac3AtmosSettings withBitstreamMode(String bitstreamMode)
```
    Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
    
    Parameters:
    
    bitstreamMode - Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosBitstreamMode
  - withBitstreamMode
```
public Eac3AtmosSettings withBitstreamMode(Eac3AtmosBitstreamMode bitstreamMode)
```
    Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
    
    Parameters:
    
    bitstreamMode - Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosBitstreamMode
  - setCodingMode
```
public void setCodingMode(String codingMode)
```
    The coding mode for Dolby Digital Plus JOC (Atmos).
    
    Parameters:
    
    codingMode - The coding mode for Dolby Digital Plus JOC (Atmos).
    
    See Also:
    
    Eac3AtmosCodingMode
  - getCodingMode
```
public String getCodingMode()
```
    The coding mode for Dolby Digital Plus JOC (Atmos).
    
    Returns:
    
    The coding mode for Dolby Digital Plus JOC (Atmos).
    
    See Also:
    
    Eac3AtmosCodingMode
  - withCodingMode
```
public Eac3AtmosSettings withCodingMode(String codingMode)
```
    The coding mode for Dolby Digital Plus JOC (Atmos).
    
    Parameters:
    
    codingMode - The coding mode for Dolby Digital Plus JOC (Atmos).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosCodingMode
  - withCodingMode
```
public Eac3AtmosSettings withCodingMode(Eac3AtmosCodingMode codingMode)
```
    The coding mode for Dolby Digital Plus JOC (Atmos).
    
    Parameters:
    
    codingMode - The coding mode for Dolby Digital Plus JOC (Atmos).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosCodingMode
  - setDialogueIntelligence
```
public void setDialogueIntelligence(String dialogueIntelligence)
```
    Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
    
    Parameters:
    
    dialogueIntelligence - Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
    
    See Also:
    
    Eac3AtmosDialogueIntelligence
  - getDialogueIntelligence
```
public String getDialogueIntelligence()
```
    Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
    
    Returns:
    
    Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
    
    See Also:
    
    Eac3AtmosDialogueIntelligence
  - withDialogueIntelligence
```
public Eac3AtmosSettings withDialogueIntelligence(String dialogueIntelligence)
```
    Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
    
    Parameters:
    
    dialogueIntelligence - Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosDialogueIntelligence
  - withDialogueIntelligence
```
public Eac3AtmosSettings withDialogueIntelligence(Eac3AtmosDialogueIntelligence dialogueIntelligence)
```
    Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
    
    Parameters:
    
    dialogueIntelligence - Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosDialogueIntelligence
  - setDownmixControl
```
public void setDownmixControl(String downmixControl)
```
    Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Parameters:
    
    downmixControl - Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    See Also:
    
    Eac3AtmosDownmixControl
  - getDownmixControl
```
public String getDownmixControl()
```
    Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Returns:
    
    Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    See Also:
    
    Eac3AtmosDownmixControl
  - withDownmixControl
```
public Eac3AtmosSettings withDownmixControl(String downmixControl)
```
    Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Parameters:
    
    downmixControl - Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosDownmixControl
  - withDownmixControl
```
public Eac3AtmosSettings withDownmixControl(Eac3AtmosDownmixControl downmixControl)
```
    Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Parameters:
    
    downmixControl - Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosDownmixControl
  - setDynamicRangeCompressionLine
```
public void setDynamicRangeCompressionLine(String dynamicRangeCompressionLine)
```
    Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Parameters:
    
    dynamicRangeCompressionLine - Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    See Also:
    
    Eac3AtmosDynamicRangeCompressionLine
  - getDynamicRangeCompressionLine
```
public String getDynamicRangeCompressionLine()
```
    Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Returns:
    
    Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    See Also:
    
    Eac3AtmosDynamicRangeCompressionLine
  - withDynamicRangeCompressionLine
```
public Eac3AtmosSettings withDynamicRangeCompressionLine(String dynamicRangeCompressionLine)
```
    Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Parameters:
    
    dynamicRangeCompressionLine - Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosDynamicRangeCompressionLine
  - withDynamicRangeCompressionLine
```
public Eac3AtmosSettings withDynamicRangeCompressionLine(Eac3AtmosDynamicRangeCompressionLine dynamicRangeCompressionLine)
```
    Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Parameters:
    
    dynamicRangeCompressionLine - Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosDynamicRangeCompressionLine
  - setDynamicRangeCompressionRf
```
public void setDynamicRangeCompressionRf(String dynamicRangeCompressionRf)
```
    Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Parameters:
    
    dynamicRangeCompressionRf - Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    See Also:
    
    Eac3AtmosDynamicRangeCompressionRf
  - getDynamicRangeCompressionRf
```
public String getDynamicRangeCompressionRf()
```
    Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Returns:
    
    Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    See Also:
    
    Eac3AtmosDynamicRangeCompressionRf
  - withDynamicRangeCompressionRf
```
public Eac3AtmosSettings withDynamicRangeCompressionRf(String dynamicRangeCompressionRf)
```
    Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Parameters:
    
    dynamicRangeCompressionRf - Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosDynamicRangeCompressionRf
  - withDynamicRangeCompressionRf
```
public Eac3AtmosSettings withDynamicRangeCompressionRf(Eac3AtmosDynamicRangeCompressionRf dynamicRangeCompressionRf)
```
    Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Parameters:
    
    dynamicRangeCompressionRf - Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosDynamicRangeCompressionRf
  - setDynamicRangeControl
```
public void setDynamicRangeControl(String dynamicRangeControl)
```
    Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Parameters:
    
    dynamicRangeControl - Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    See Also:
    
    Eac3AtmosDynamicRangeControl
  - getDynamicRangeControl
```
public String getDynamicRangeControl()
```
    Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Returns:
    
    Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    See Also:
    
    Eac3AtmosDynamicRangeControl
  - withDynamicRangeControl
```
public Eac3AtmosSettings withDynamicRangeControl(String dynamicRangeControl)
```
    Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Parameters:
    
    dynamicRangeControl - Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosDynamicRangeControl
  - withDynamicRangeControl
```
public Eac3AtmosSettings withDynamicRangeControl(Eac3AtmosDynamicRangeControl dynamicRangeControl)
```
    Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Parameters:
    
    dynamicRangeControl - Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosDynamicRangeControl
  - setLoRoCenterMixLevel
```
public void setLoRoCenterMixLevel(Double loRoCenterMixLevel)
```
    Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only center (LoRoCenterMixLevel).
    
    Parameters:
    
    loRoCenterMixLevel - Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only center (LoRoCenterMixLevel).
  - getLoRoCenterMixLevel
```
public Double getLoRoCenterMixLevel()
```
    Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only center (LoRoCenterMixLevel).
    
    Returns:
    
    Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only center (LoRoCenterMixLevel).
  - withLoRoCenterMixLevel
```
public Eac3AtmosSettings withLoRoCenterMixLevel(Double loRoCenterMixLevel)
```
    Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only center (LoRoCenterMixLevel).
    
    Parameters:
    
    loRoCenterMixLevel - Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only center (LoRoCenterMixLevel).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setLoRoSurroundMixLevel
```
public void setLoRoSurroundMixLevel(Double loRoSurroundMixLevel)
```
    Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only surround (LoRoSurroundMixLevel).
    
    Parameters:
    
    loRoSurroundMixLevel - Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only surround (LoRoSurroundMixLevel).
  - getLoRoSurroundMixLevel
```
public Double getLoRoSurroundMixLevel()
```
    Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only surround (LoRoSurroundMixLevel).
    
    Returns:
    
    Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only surround (LoRoSurroundMixLevel).
  - withLoRoSurroundMixLevel
```
public Eac3AtmosSettings withLoRoSurroundMixLevel(Double loRoSurroundMixLevel)
```
    Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only surround (LoRoSurroundMixLevel).
    
    Parameters:
    
    loRoSurroundMixLevel - Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only surround (LoRoSurroundMixLevel).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setLtRtCenterMixLevel
```
public void setLtRtCenterMixLevel(Double ltRtCenterMixLevel)
```
    Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left total/Right total center (LtRtCenterMixLevel).
    
    Parameters:
    
    ltRtCenterMixLevel - Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left total/Right total center (LtRtCenterMixLevel).
  - getLtRtCenterMixLevel
```
public Double getLtRtCenterMixLevel()
```
    Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left total/Right total center (LtRtCenterMixLevel).
    
    Returns:
    
    Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left total/Right total center (LtRtCenterMixLevel).
  - withLtRtCenterMixLevel
```
public Eac3AtmosSettings withLtRtCenterMixLevel(Double ltRtCenterMixLevel)
```
    Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left total/Right total center (LtRtCenterMixLevel).
    
    Parameters:
    
    ltRtCenterMixLevel - Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left total/Right total center (LtRtCenterMixLevel).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setLtRtSurroundMixLevel
```
public void setLtRtSurroundMixLevel(Double ltRtSurroundMixLevel)
```
    Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, the service ignores Left total/Right total surround (LtRtSurroundMixLevel).
    
    Parameters:
    
    ltRtSurroundMixLevel - Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, the service ignores Left total/Right total surround (LtRtSurroundMixLevel).
  - getLtRtSurroundMixLevel
```
public Double getLtRtSurroundMixLevel()
```
    Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, the service ignores Left total/Right total surround (LtRtSurroundMixLevel).
    
    Returns:
    
    Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, the service ignores Left total/Right total surround (LtRtSurroundMixLevel).
  - withLtRtSurroundMixLevel
```
public Eac3AtmosSettings withLtRtSurroundMixLevel(Double ltRtSurroundMixLevel)
```
    Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, the service ignores Left total/Right total surround (LtRtSurroundMixLevel).
    
    Parameters:
    
    ltRtSurroundMixLevel - Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, the service ignores Left total/Right total surround (LtRtSurroundMixLevel).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setMeteringMode
```
public void setMeteringMode(String meteringMode)
```
    Choose how the service meters the loudness of your audio.
    
    Parameters:
    
    meteringMode - Choose how the service meters the loudness of your audio.
    
    See Also:
    
    Eac3AtmosMeteringMode
  - getMeteringMode
```
public String getMeteringMode()
```
    Choose how the service meters the loudness of your audio.
    
    Returns:
    
    Choose how the service meters the loudness of your audio.
    
    See Also:
    
    Eac3AtmosMeteringMode
  - withMeteringMode
```
public Eac3AtmosSettings withMeteringMode(String meteringMode)
```
    Choose how the service meters the loudness of your audio.
    
    Parameters:
    
    meteringMode - Choose how the service meters the loudness of your audio.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosMeteringMode
  - withMeteringMode
```
public Eac3AtmosSettings withMeteringMode(Eac3AtmosMeteringMode meteringMode)
```
    Choose how the service meters the loudness of your audio.
    
    Parameters:
    
    meteringMode - Choose how the service meters the loudness of your audio.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosMeteringMode
  - setSampleRate
```
public void setSampleRate(Integer sampleRate)
```
    This value is always 48000. It represents the sample rate in Hz.
    
    Parameters:
    
    sampleRate - This value is always 48000. It represents the sample rate in Hz.
  - getSampleRate
```
public Integer getSampleRate()
```
    This value is always 48000. It represents the sample rate in Hz.
    
    Returns:
    
    This value is always 48000. It represents the sample rate in Hz.
  - withSampleRate
```
public Eac3AtmosSettings withSampleRate(Integer sampleRate)
```
    This value is always 48000. It represents the sample rate in Hz.
    
    Parameters:
    
    sampleRate - This value is always 48000. It represents the sample rate in Hz.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setSpeechThreshold
```
public void setSpeechThreshold(Integer speechThreshold)
```
    Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%
    
    Parameters:
    
    speechThreshold - Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%
  - getSpeechThreshold
```
public Integer getSpeechThreshold()
```
    Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%
    
    Returns:
    
    Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%
  - withSpeechThreshold
```
public Eac3AtmosSettings withSpeechThreshold(Integer speechThreshold)
```
    Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%
    
    Parameters:
    
    speechThreshold - Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setStereoDownmix
```
public void setStereoDownmix(String stereoDownmix)
```
    Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).
    
    Parameters:
    
    stereoDownmix - Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).
    
    See Also:
    
    Eac3AtmosStereoDownmix
  - getStereoDownmix
```
public String getStereoDownmix()
```
    Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).
    
    Returns:
    
    Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).
    
    See Also:
    
    Eac3AtmosStereoDownmix
  - withStereoDownmix
```
public Eac3AtmosSettings withStereoDownmix(String stereoDownmix)
```
    Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).
    
    Parameters:
    
    stereoDownmix - Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosStereoDownmix
  - withStereoDownmix
```
public Eac3AtmosSettings withStereoDownmix(Eac3AtmosStereoDownmix stereoDownmix)
```
    Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).
    
    Parameters:
    
    stereoDownmix - Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosStereoDownmix
  - setSurroundExMode
```
public void setSurroundExMode(String surroundExMode)
```
    Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
    
    Parameters:
    
    surroundExMode - Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
    
    See Also:
    
    Eac3AtmosSurroundExMode
  - getSurroundExMode
```
public String getSurroundExMode()
```
    Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
    
    Returns:
    
    Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
    
    See Also:
    
    Eac3AtmosSurroundExMode
  - withSurroundExMode
```
public Eac3AtmosSettings withSurroundExMode(String surroundExMode)
```
    Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
    
    Parameters:
    
    surroundExMode - Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosSurroundExMode
  - withSurroundExMode
```
public Eac3AtmosSettings withSurroundExMode(Eac3AtmosSurroundExMode surroundExMode)
```
    Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
    
    Parameters:
    
    surroundExMode - Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    Eac3AtmosSurroundExMode
  - toString
```
public String toString()
```
    Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
    
    Overrides:
    
    toString in class Object
    
    Returns:
    
    A string representation of this object.
    
    See Also:
    
    Object.toString()
  - equals
```
public boolean equals(Object obj)
```
    Overrides:
    
    equals in class Object
  - hashCode
```
public int hashCode()
```
    Overrides:
    
    hashCode in class Object
  - clone
```
public Eac3AtmosSettings clone()
```
    Overrides:
    
    clone in class Object
  - marshall
```
public void marshall(ProtocolMarshaller protocolMarshaller)
```
    Description copied from interface: StructuredPojo
    
    Marshalls this structured data using the given ProtocolMarshaller.
    
    Specified by:
    
    marshall in interface StructuredPojo
    
    Parameters:
    
    protocolMarshaller - Implementation of ProtocolMarshaller used to marshall this object's data.

Did this page help you?

Class Eac3AtmosSettings

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

Eac3AtmosSettings

Method Detail

setBitrate

getBitrate

withBitrate

setBitstreamMode

getBitstreamMode

withBitstreamMode

withBitstreamMode

setCodingMode

getCodingMode

withCodingMode

withCodingMode

setDialogueIntelligence

getDialogueIntelligence

withDialogueIntelligence

withDialogueIntelligence

setDownmixControl

getDownmixControl

withDownmixControl

withDownmixControl

setDynamicRangeCompressionLine

getDynamicRangeCompressionLine

withDynamicRangeCompressionLine

withDynamicRangeCompressionLine

setDynamicRangeCompressionRf

getDynamicRangeCompressionRf

withDynamicRangeCompressionRf

withDynamicRangeCompressionRf

setDynamicRangeControl

getDynamicRangeControl

withDynamicRangeControl

withDynamicRangeControl

setLoRoCenterMixLevel

getLoRoCenterMixLevel

withLoRoCenterMixLevel

setLoRoSurroundMixLevel

getLoRoSurroundMixLevel

withLoRoSurroundMixLevel

setLtRtCenterMixLevel

getLtRtCenterMixLevel

withLtRtCenterMixLevel

setLtRtSurroundMixLevel

getLtRtSurroundMixLevel

withLtRtSurroundMixLevel

setMeteringMode

getMeteringMode

withMeteringMode

withMeteringMode

setSampleRate

getSampleRate

withSampleRate

setSpeechThreshold

getSpeechThreshold

withSpeechThreshold

setStereoDownmix

getStereoDownmix

withStereoDownmix

withStereoDownmix

setSurroundExMode

getSurroundExMode

withSurroundExMode

withSurroundExMode

toString

equals

hashCode

clone

marshall