AbstractAmazonSimpleEmailServiceV2 (AWS SDK for Java

java.lang.Object
- com.amazonaws.services.simpleemailv2.AbstractAmazonSimpleEmailServiceV2

All Implemented Interfaces:

AmazonSimpleEmailServiceV2

Direct Known Subclasses:

AbstractAmazonSimpleEmailServiceV2Async
```
@Generated(value="com.amazonaws:aws-java-sdk-code-generator")
public class AbstractAmazonSimpleEmailServiceV2
extends Object
implements AmazonSimpleEmailServiceV2
```
Abstract implementation of AmazonSimpleEmailServiceV2. Convenient method forms pass through to the corresponding overload that takes a request object, which throws an UnsupportedOperationException.

Field Summary
- Fields inherited from interface com.amazonaws.services.simpleemailv2.AmazonSimpleEmailServiceV2
  ENDPOINT_PREFIX

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`BatchGetMetricDataResult`	`batchGetMetricData(BatchGetMetricDataRequest request)` Retrieves batches of metric data collected based on your sending activity.
`CreateConfigurationSetResult`	`createConfigurationSet(CreateConfigurationSetRequest request)` Create a configuration set.
`CreateConfigurationSetEventDestinationResult`	`createConfigurationSetEventDestination(CreateConfigurationSetEventDestinationRequest request)` Create an event destination.
`CreateContactResult`	`createContact(CreateContactRequest request)` Creates a contact, which is an end-user who is receiving the email, and adds them to a contact list.
`CreateContactListResult`	`createContactList(CreateContactListRequest request)` Creates a contact list.
`CreateCustomVerificationEmailTemplateResult`	`createCustomVerificationEmailTemplate(CreateCustomVerificationEmailTemplateRequest request)` Creates a new custom verification email template.
`CreateDedicatedIpPoolResult`	`createDedicatedIpPool(CreateDedicatedIpPoolRequest request)` Create a new pool of dedicated IP addresses.
`CreateDeliverabilityTestReportResult`	`createDeliverabilityTestReport(CreateDeliverabilityTestReportRequest request)` Create a new predictive inbox placement test.
`CreateEmailIdentityResult`	`createEmailIdentity(CreateEmailIdentityRequest request)` Starts the process of verifying an email identity.
`CreateEmailIdentityPolicyResult`	`createEmailIdentityPolicy(CreateEmailIdentityPolicyRequest request)` Creates the specified sending authorization policy for the given identity (an email address or a domain).
`CreateEmailTemplateResult`	`createEmailTemplate(CreateEmailTemplateRequest request)` Creates an email template.
`CreateImportJobResult`	`createImportJob(CreateImportJobRequest request)` Creates an import job for a data destination.
`DeleteConfigurationSetResult`	`deleteConfigurationSet(DeleteConfigurationSetRequest request)` Delete an existing configuration set.
`DeleteConfigurationSetEventDestinationResult`	`deleteConfigurationSetEventDestination(DeleteConfigurationSetEventDestinationRequest request)` Delete an event destination.
`DeleteContactResult`	`deleteContact(DeleteContactRequest request)` Removes a contact from a contact list.
`DeleteContactListResult`	`deleteContactList(DeleteContactListRequest request)` Deletes a contact list and all of the contacts on that list.
`DeleteCustomVerificationEmailTemplateResult`	`deleteCustomVerificationEmailTemplate(DeleteCustomVerificationEmailTemplateRequest request)` Deletes an existing custom verification email template.
`DeleteDedicatedIpPoolResult`	`deleteDedicatedIpPool(DeleteDedicatedIpPoolRequest request)` Delete a dedicated IP pool.
`DeleteEmailIdentityResult`	`deleteEmailIdentity(DeleteEmailIdentityRequest request)` Deletes an email identity.
`DeleteEmailIdentityPolicyResult`	`deleteEmailIdentityPolicy(DeleteEmailIdentityPolicyRequest request)` Deletes the specified sending authorization policy for the given identity (an email address or a domain).
`DeleteEmailTemplateResult`	`deleteEmailTemplate(DeleteEmailTemplateRequest request)` Deletes an email template.
`DeleteSuppressedDestinationResult`	`deleteSuppressedDestination(DeleteSuppressedDestinationRequest request)` Removes an email address from the suppression list for your account.
`GetAccountResult`	`getAccount(GetAccountRequest request)` Obtain information about the email-sending status and capabilities of your Amazon SES account in the current Amazon Web Services Region.
`GetBlacklistReportsResult`	`getBlacklistReports(GetBlacklistReportsRequest request)` Retrieve a list of the blacklists that your dedicated IP addresses appear on.
`ResponseMetadata`	`getCachedResponseMetadata(AmazonWebServiceRequest request)` Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected.
`GetConfigurationSetResult`	`getConfigurationSet(GetConfigurationSetRequest request)` Get information about an existing configuration set, including the dedicated IP pool that it's associated with, whether or not it's enabled for sending email, and more.
`GetConfigurationSetEventDestinationsResult`	`getConfigurationSetEventDestinations(GetConfigurationSetEventDestinationsRequest request)` Retrieve a list of event destinations that are associated with a configuration set.
`GetContactResult`	`getContact(GetContactRequest request)` Returns a contact from a contact list.
`GetContactListResult`	`getContactList(GetContactListRequest request)` Returns contact list metadata.
`GetCustomVerificationEmailTemplateResult`	`getCustomVerificationEmailTemplate(GetCustomVerificationEmailTemplateRequest request)` Returns the custom email verification template for the template name you specify.
`GetDedicatedIpResult`	`getDedicatedIp(GetDedicatedIpRequest request)` Get information about a dedicated IP address, including the name of the dedicated IP pool that it's associated with, as well information about the automatic warm-up process for the address.
`GetDedicatedIpPoolResult`	`getDedicatedIpPool(GetDedicatedIpPoolRequest request)` Retrieve information about the dedicated pool.
`GetDedicatedIpsResult`	`getDedicatedIps(GetDedicatedIpsRequest request)` List the dedicated IP addresses that are associated with your Amazon Web Services account.
`GetDeliverabilityDashboardOptionsResult`	`getDeliverabilityDashboardOptions(GetDeliverabilityDashboardOptionsRequest request)` Retrieve information about the status of the Deliverability dashboard for your account.
`GetDeliverabilityTestReportResult`	`getDeliverabilityTestReport(GetDeliverabilityTestReportRequest request)` Retrieve the results of a predictive inbox placement test.
`GetDomainDeliverabilityCampaignResult`	`getDomainDeliverabilityCampaign(GetDomainDeliverabilityCampaignRequest request)` Retrieve all the deliverability data for a specific campaign.
`GetDomainStatisticsReportResult`	`getDomainStatisticsReport(GetDomainStatisticsReportRequest request)` Retrieve inbox placement and engagement rates for the domains that you use to send email.
`GetEmailIdentityResult`	`getEmailIdentity(GetEmailIdentityRequest request)` Provides information about a specific identity, including the identity's verification status, sending authorization policies, its DKIM authentication status, and its custom Mail-From settings.
`GetEmailIdentityPoliciesResult`	`getEmailIdentityPolicies(GetEmailIdentityPoliciesRequest request)` Returns the requested sending authorization policies for the given identity (an email address or a domain).
`GetEmailTemplateResult`	`getEmailTemplate(GetEmailTemplateRequest request)` Displays the template object (which includes the subject line, HTML part and text part) for the template you specify.
`GetImportJobResult`	`getImportJob(GetImportJobRequest request)` Provides information about an import job.
`GetSuppressedDestinationResult`	`getSuppressedDestination(GetSuppressedDestinationRequest request)` Retrieves information about a specific email address that's on the suppression list for your account.
`ListConfigurationSetsResult`	`listConfigurationSets(ListConfigurationSetsRequest request)` List all of the configuration sets associated with your account in the current region.
`ListContactListsResult`	`listContactLists(ListContactListsRequest request)` Lists all of the contact lists available.
`ListContactsResult`	`listContacts(ListContactsRequest request)` Lists the contacts present in a specific contact list.
`ListCustomVerificationEmailTemplatesResult`	`listCustomVerificationEmailTemplates(ListCustomVerificationEmailTemplatesRequest request)` Lists the existing custom verification email templates for your account in the current Amazon Web Services Region.
`ListDedicatedIpPoolsResult`	`listDedicatedIpPools(ListDedicatedIpPoolsRequest request)` List all of the dedicated IP pools that exist in your Amazon Web Services account in the current Region.
`ListDeliverabilityTestReportsResult`	`listDeliverabilityTestReports(ListDeliverabilityTestReportsRequest request)` Show a list of the predictive inbox placement tests that you've performed, regardless of their statuses.
`ListDomainDeliverabilityCampaignsResult`	`listDomainDeliverabilityCampaigns(ListDomainDeliverabilityCampaignsRequest request)` Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range.
`ListEmailIdentitiesResult`	`listEmailIdentities(ListEmailIdentitiesRequest request)` Returns a list of all of the email identities that are associated with your Amazon Web Services account.
`ListEmailTemplatesResult`	`listEmailTemplates(ListEmailTemplatesRequest request)` Lists the email templates present in your Amazon SES account in the current Amazon Web Services Region.
`ListImportJobsResult`	`listImportJobs(ListImportJobsRequest request)` Lists all of the import jobs.
`ListRecommendationsResult`	`listRecommendations(ListRecommendationsRequest request)` Lists the recommendations present in your Amazon SES account in the current Amazon Web Services Region.
`ListSuppressedDestinationsResult`	`listSuppressedDestinations(ListSuppressedDestinationsRequest request)` Retrieves a list of email addresses that are on the suppression list for your account.
`ListTagsForResourceResult`	`listTagsForResource(ListTagsForResourceRequest request)` Retrieve a list of the tags (keys and values) that are associated with a specified resource.
`PutAccountDedicatedIpWarmupAttributesResult`	`putAccountDedicatedIpWarmupAttributes(PutAccountDedicatedIpWarmupAttributesRequest request)` Enable or disable the automatic warm-up feature for dedicated IP addresses.
`PutAccountDetailsResult`	`putAccountDetails(PutAccountDetailsRequest request)` Update your Amazon SES account details.
`PutAccountSendingAttributesResult`	`putAccountSendingAttributes(PutAccountSendingAttributesRequest request)` Enable or disable the ability of your account to send email.
`PutAccountSuppressionAttributesResult`	`putAccountSuppressionAttributes(PutAccountSuppressionAttributesRequest request)` Change the settings for the account-level suppression list.
`PutAccountVdmAttributesResult`	`putAccountVdmAttributes(PutAccountVdmAttributesRequest request)` Update your Amazon SES account VDM attributes.
`PutConfigurationSetDeliveryOptionsResult`	`putConfigurationSetDeliveryOptions(PutConfigurationSetDeliveryOptionsRequest request)` Associate a configuration set with a dedicated IP pool.
`PutConfigurationSetReputationOptionsResult`	`putConfigurationSetReputationOptions(PutConfigurationSetReputationOptionsRequest request)` Enable or disable collection of reputation metrics for emails that you send using a particular configuration set in a specific Amazon Web Services Region.
`PutConfigurationSetSendingOptionsResult`	`putConfigurationSetSendingOptions(PutConfigurationSetSendingOptionsRequest request)` Enable or disable email sending for messages that use a particular configuration set in a specific Amazon Web Services Region.
`PutConfigurationSetSuppressionOptionsResult`	`putConfigurationSetSuppressionOptions(PutConfigurationSetSuppressionOptionsRequest request)` Specify the account suppression list preferences for a configuration set.
`PutConfigurationSetTrackingOptionsResult`	`putConfigurationSetTrackingOptions(PutConfigurationSetTrackingOptionsRequest request)` Specify a custom domain to use for open and click tracking elements in email that you send.
`PutConfigurationSetVdmOptionsResult`	`putConfigurationSetVdmOptions(PutConfigurationSetVdmOptionsRequest request)` Specify VDM preferences for email that you send using the configuration set.
`PutDedicatedIpInPoolResult`	`putDedicatedIpInPool(PutDedicatedIpInPoolRequest request)` Move a dedicated IP address to an existing dedicated IP pool.
`PutDedicatedIpPoolScalingAttributesResult`	`putDedicatedIpPoolScalingAttributes(PutDedicatedIpPoolScalingAttributesRequest request)` Used to convert a dedicated IP pool to a different scaling mode.
`PutDedicatedIpWarmupAttributesResult`	`putDedicatedIpWarmupAttributes(PutDedicatedIpWarmupAttributesRequest request)`
`PutDeliverabilityDashboardOptionResult`	`putDeliverabilityDashboardOption(PutDeliverabilityDashboardOptionRequest request)` Enable or disable the Deliverability dashboard.
`PutEmailIdentityConfigurationSetAttributesResult`	`putEmailIdentityConfigurationSetAttributes(PutEmailIdentityConfigurationSetAttributesRequest request)` Used to associate a configuration set with an email identity.
`PutEmailIdentityDkimAttributesResult`	`putEmailIdentityDkimAttributes(PutEmailIdentityDkimAttributesRequest request)` Used to enable or disable DKIM authentication for an email identity.
`PutEmailIdentityDkimSigningAttributesResult`	`putEmailIdentityDkimSigningAttributes(PutEmailIdentityDkimSigningAttributesRequest request)` Used to configure or change the DKIM authentication settings for an email domain identity.
`PutEmailIdentityFeedbackAttributesResult`	`putEmailIdentityFeedbackAttributes(PutEmailIdentityFeedbackAttributesRequest request)` Used to enable or disable feedback forwarding for an identity.
`PutEmailIdentityMailFromAttributesResult`	`putEmailIdentityMailFromAttributes(PutEmailIdentityMailFromAttributesRequest request)` Used to enable or disable the custom Mail-From domain configuration for an email identity.
`PutSuppressedDestinationResult`	`putSuppressedDestination(PutSuppressedDestinationRequest request)` Adds an email address to the suppression list for your account.
`SendBulkEmailResult`	`sendBulkEmail(SendBulkEmailRequest request)` Composes an email message to multiple destinations.
`SendCustomVerificationEmailResult`	`sendCustomVerificationEmail(SendCustomVerificationEmailRequest request)` Adds an email address to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it.
`SendEmailResult`	`sendEmail(SendEmailRequest request)` Sends an email message.
`void`	`shutdown()` Shuts down this client object, releasing any resources that might be held open.
`TagResourceResult`	`tagResource(TagResourceRequest request)` Add one or more tags (keys and values) to a specified resource.
`TestRenderEmailTemplateResult`	`testRenderEmailTemplate(TestRenderEmailTemplateRequest request)` Creates a preview of the MIME content of an email when provided with a template and a set of replacement data.
`UntagResourceResult`	`untagResource(UntagResourceRequest request)` Remove one or more tags (keys and values) from a specified resource.
`UpdateConfigurationSetEventDestinationResult`	`updateConfigurationSetEventDestination(UpdateConfigurationSetEventDestinationRequest request)` Update the configuration of an event destination for a configuration set.
`UpdateContactResult`	`updateContact(UpdateContactRequest request)` Updates a contact's preferences for a list.
`UpdateContactListResult`	`updateContactList(UpdateContactListRequest request)` Updates contact list metadata.
`UpdateCustomVerificationEmailTemplateResult`	`updateCustomVerificationEmailTemplate(UpdateCustomVerificationEmailTemplateRequest request)` Updates an existing custom verification email template.
`UpdateEmailIdentityPolicyResult`	`updateEmailIdentityPolicy(UpdateEmailIdentityPolicyRequest request)` Updates the specified sending authorization policy for the given identity (an email address or a domain).
`UpdateEmailTemplateResult`	`updateEmailTemplate(UpdateEmailTemplateRequest request)` Updates an email template.

Methods inherited from class java.lang.Object
equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Method Detail
  - batchGetMetricData
```
public BatchGetMetricDataResult batchGetMetricData(BatchGetMetricDataRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieves batches of metric data collected based on your sending activity.
    
    You can execute this operation no more than 16 times per second, and with at most 160 queries from the batches per second (cumulative).
    
    Specified by:
    
    batchGetMetricData in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to retrieve a batch of metric data.
    
    Returns:
    
    Result of the BatchGetMetricData operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createConfigurationSet
```
public CreateConfigurationSetResult createConfigurationSet(CreateConfigurationSetRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Create a configuration set. Configuration sets are groups of rules that you can apply to the emails that you send. You apply a configuration set to an email by specifying the name of the configuration set when you call the Amazon SES API v2. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.
    
    Specified by:
    
    createConfigurationSet in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to create a configuration set.
    
    Returns:
    
    Result of the CreateConfigurationSet operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createConfigurationSetEventDestination
```
public CreateConfigurationSetEventDestinationResult createConfigurationSetEventDestination(CreateConfigurationSetEventDestinationRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Create an event destination. Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon SNS to receive notifications when you receive bounces or complaints, or you can use Amazon Kinesis Data Firehose to stream data to Amazon S3 for long-term storage.
    
    A single configuration set can include more than one event destination.
    
    Specified by:
    
    createConfigurationSetEventDestination in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to add an event destination to a configuration set.
    
    Returns:
    
    Result of the CreateConfigurationSetEventDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createContact
```
public CreateContactResult createContact(CreateContactRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Creates a contact, which is an end-user who is receiving the email, and adds them to a contact list.
    
    Specified by:
    
    createContact in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the CreateContact operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createContactList
```
public CreateContactListResult createContactList(CreateContactListRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Creates a contact list.
    
    Specified by:
    
    createContactList in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the CreateContactList operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createCustomVerificationEmailTemplate
```
public CreateCustomVerificationEmailTemplateResult createCustomVerificationEmailTemplate(CreateCustomVerificationEmailTemplateRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Creates a new custom verification email template.
    
    For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    createCustomVerificationEmailTemplate in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to create a custom verification email template.
    
    Returns:
    
    Result of the CreateCustomVerificationEmailTemplate operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createDedicatedIpPool
```
public CreateDedicatedIpPoolResult createDedicatedIpPool(CreateDedicatedIpPoolRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Create a new pool of dedicated IP addresses. A pool can include one or more dedicated IP addresses that are associated with your Amazon Web Services account. You can associate a pool with a configuration set. When you send an email that uses that configuration set, the message is sent from one of the addresses in the associated pool.
    
    Specified by:
    
    createDedicatedIpPool in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to create a new dedicated IP pool.
    
    Returns:
    
    Result of the CreateDedicatedIpPool operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createDeliverabilityTestReport
```
public CreateDeliverabilityTestReportResult createDeliverabilityTestReport(CreateDeliverabilityTestReportRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Create a new predictive inbox placement test. Predictive inbox placement tests can help you predict how your messages will be handled by various email providers around the world. When you perform a predictive inbox placement test, you provide a sample message that contains the content that you plan to send to your customers. Amazon SES then sends that message to special email addresses spread across several major email providers. After about 24 hours, the test is complete, and you can use the GetDeliverabilityTestReport operation to view the results of the test.
    
    Specified by:
    
    createDeliverabilityTestReport in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to perform a predictive inbox placement test. Predictive inbox placement tests can help you predict how your messages will be handled by various email providers around the world. When you perform a predictive inbox placement test, you provide a sample message that contains the content that you plan to send to your customers. We send that message to special email addresses spread across several major email providers around the world. The test takes about 24 hours to complete. When the test is complete, you can use the GetDeliverabilityTestReport operation to view the results of the test.
    
    Returns:
    
    Result of the CreateDeliverabilityTestReport operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createEmailIdentity
```
public CreateEmailIdentityResult createEmailIdentity(CreateEmailIdentityRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Starts the process of verifying an email identity. An identity is an email address or domain that you use when you send email. Before you can use an identity to send email, you first have to verify it. By verifying an identity, you demonstrate that you're the owner of the identity, and that you've given Amazon SES API v2 permission to send email from the identity.
    
    When you verify an email address, Amazon SES sends an email to the address. Your email address is verified as soon as you follow the link in the verification email.
    
    When you verify a domain without specifying the DkimSigningAttributes object, this operation provides a set of DKIM tokens. You can convert these tokens into CNAME records, which you then add to the DNS configuration for your domain. Your domain is verified when Amazon SES detects these records in the DNS configuration for your domain. This verification method is known as Easy DKIM.
    
    Alternatively, you can perform the verification process by providing your own public-private key pair. This verification method is known as Bring Your Own DKIM (BYODKIM). To use BYODKIM, your call to the CreateEmailIdentity operation has to include the DkimSigningAttributes object. When you specify this object, you provide a selector (a component of the DNS record name that identifies the public key to use for DKIM authentication) and a private key.
    
    When you verify a domain, this operation provides a set of DKIM tokens, which you can convert into CNAME tokens. You add these CNAME tokens to the DNS configuration for your domain. Your domain is verified when Amazon SES detects these records in the DNS configuration for your domain. For some DNS providers, it can take 72 hours or more to complete the domain verification process.
    
    Additionally, you can associate an existing configuration set with the email identity that you're verifying.
    
    Specified by:
    
    createEmailIdentity in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to begin the verification process for an email identity (an email address or domain).
    
    Returns:
    
    Result of the CreateEmailIdentity operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createEmailIdentityPolicy
```
public CreateEmailIdentityPolicyResult createEmailIdentityPolicy(CreateEmailIdentityPolicyRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Creates the specified sending authorization policy for the given identity (an email address or a domain).
    
    This API is for the identity owner only. If you have not verified the identity, this API will return an error.
    
    Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    createEmailIdentityPolicy in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to create a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.
    
    Returns:
    
    Result of the CreateEmailIdentityPolicy operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createEmailTemplate
```
public CreateEmailTemplateResult createEmailTemplate(CreateEmailTemplateRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    createEmailTemplate in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to create an email template. For more information, see the Amazon SES Developer Guide.
    
    Returns:
    
    Result of the CreateEmailTemplate operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - createImportJob
```
public CreateImportJobResult createImportJob(CreateImportJobRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Creates an import job for a data destination.
    
    Specified by:
    
    createImportJob in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to create an import job from a data source for a data destination.
    
    Returns:
    
    Result of the CreateImportJob operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteConfigurationSet
```
public DeleteConfigurationSetResult deleteConfigurationSet(DeleteConfigurationSetRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Delete an existing configuration set.
    
    Configuration sets are groups of rules that you can apply to the emails you send. You apply a configuration set to an email by including a reference to the configuration set in the headers of the email. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.
    
    Specified by:
    
    deleteConfigurationSet in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to delete a configuration set.
    
    Returns:
    
    Result of the DeleteConfigurationSet operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteConfigurationSetEventDestination
```
public DeleteConfigurationSetEventDestinationResult deleteConfigurationSetEventDestination(DeleteConfigurationSetEventDestinationRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Delete an event destination.
    
    Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon SNS to receive notifications when you receive bounces or complaints, or you can use Amazon Kinesis Data Firehose to stream data to Amazon S3 for long-term storage.
    
    Specified by:
    
    deleteConfigurationSetEventDestination in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to delete an event destination from a configuration set.
    
    Returns:
    
    Result of the DeleteConfigurationSetEventDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteContact
```
public DeleteContactResult deleteContact(DeleteContactRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Removes a contact from a contact list.
    
    Specified by:
    
    deleteContact in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the DeleteContact operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteContactList
```
public DeleteContactListResult deleteContactList(DeleteContactListRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Deletes a contact list and all of the contacts on that list.
    
    Specified by:
    
    deleteContactList in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the DeleteContactList operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteCustomVerificationEmailTemplate
```
public DeleteCustomVerificationEmailTemplateResult deleteCustomVerificationEmailTemplate(DeleteCustomVerificationEmailTemplateRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Deletes an existing custom verification email template.
    
    For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    deleteCustomVerificationEmailTemplate in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to delete an existing custom verification email template.
    
    Returns:
    
    Result of the DeleteCustomVerificationEmailTemplate operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteDedicatedIpPool
```
public DeleteDedicatedIpPoolResult deleteDedicatedIpPool(DeleteDedicatedIpPoolRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Delete a dedicated IP pool.
    
    Specified by:
    
    deleteDedicatedIpPool in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to delete a dedicated IP pool.
    
    Returns:
    
    Result of the DeleteDedicatedIpPool operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteEmailIdentity
```
public DeleteEmailIdentityResult deleteEmailIdentity(DeleteEmailIdentityRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Deletes an email identity. An identity can be either an email address or a domain name.
    
    Specified by:
    
    deleteEmailIdentity in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to delete an existing email identity. When you delete an identity, you lose the ability to send email from that identity. You can restore your ability to send email by completing the verification process for the identity again.
    
    Returns:
    
    Result of the DeleteEmailIdentity operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteEmailIdentityPolicy
```
public DeleteEmailIdentityPolicyResult deleteEmailIdentityPolicy(DeleteEmailIdentityPolicyRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.
    
    This API is for the identity owner only. If you have not verified the identity, this API will return an error.
    
    Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    deleteEmailIdentityPolicy in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to delete a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.
    
    Returns:
    
    Result of the DeleteEmailIdentityPolicy operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteEmailTemplate
```
public DeleteEmailTemplateResult deleteEmailTemplate(DeleteEmailTemplateRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Deletes an email template.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    deleteEmailTemplate in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to delete an email template. For more information, see the Amazon SES Developer Guide.
    
    Returns:
    
    Result of the DeleteEmailTemplate operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - deleteSuppressedDestination
```
public DeleteSuppressedDestinationResult deleteSuppressedDestination(DeleteSuppressedDestinationRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Removes an email address from the suppression list for your account.
    
    Specified by:
    
    deleteSuppressedDestination in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to remove an email address from the suppression list for your account.
    
    Returns:
    
    Result of the DeleteSuppressedDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getAccount
```
public GetAccountResult getAccount(GetAccountRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Obtain information about the email-sending status and capabilities of your Amazon SES account in the current Amazon Web Services Region.
    
    Specified by:
    
    getAccount in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to obtain information about the email-sending capabilities of your Amazon SES account.
    
    Returns:
    
    Result of the GetAccount operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getBlacklistReports
```
public GetBlacklistReportsResult getBlacklistReports(GetBlacklistReportsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieve a list of the blacklists that your dedicated IP addresses appear on.
    
    Specified by:
    
    getBlacklistReports in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to retrieve a list of the blacklists that your dedicated IP addresses appear on.
    
    Returns:
    
    Result of the GetBlacklistReports operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getConfigurationSet
```
public GetConfigurationSetResult getConfigurationSet(GetConfigurationSetRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Get information about an existing configuration set, including the dedicated IP pool that it's associated with, whether or not it's enabled for sending email, and more.
    
    Configuration sets are groups of rules that you can apply to the emails you send. You apply a configuration set to an email by including a reference to the configuration set in the headers of the email. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.
    
    Specified by:
    
    getConfigurationSet in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to obtain information about a configuration set.
    
    Returns:
    
    Result of the GetConfigurationSet operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getConfigurationSetEventDestinations
```
public GetConfigurationSetEventDestinationsResult getConfigurationSetEventDestinations(GetConfigurationSetEventDestinationsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieve a list of event destinations that are associated with a configuration set.
    
    Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon SNS to receive notifications when you receive bounces or complaints, or you can use Amazon Kinesis Data Firehose to stream data to Amazon S3 for long-term storage.
    
    Specified by:
    
    getConfigurationSetEventDestinations in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to obtain information about the event destinations for a configuration set.
    
    Returns:
    
    Result of the GetConfigurationSetEventDestinations operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getContact
```
public GetContactResult getContact(GetContactRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Returns a contact from a contact list.
    
    Specified by:
    
    getContact in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the GetContact operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getContactList
```
public GetContactListResult getContactList(GetContactListRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Returns contact list metadata. It does not return any information about the contacts present in the list.
    
    Specified by:
    
    getContactList in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the GetContactList operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getCustomVerificationEmailTemplate
```
public GetCustomVerificationEmailTemplateResult getCustomVerificationEmailTemplate(GetCustomVerificationEmailTemplateRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Returns the custom email verification template for the template name you specify.
    
    For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    getCustomVerificationEmailTemplate in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to retrieve an existing custom verification email template.
    
    Returns:
    
    Result of the GetCustomVerificationEmailTemplate operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getDedicatedIp
```
public GetDedicatedIpResult getDedicatedIp(GetDedicatedIpRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Get information about a dedicated IP address, including the name of the dedicated IP pool that it's associated with, as well information about the automatic warm-up process for the address.
    
    Specified by:
    
    getDedicatedIp in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to obtain more information about a dedicated IP address.
    
    Returns:
    
    Result of the GetDedicatedIp operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getDedicatedIpPool
```
public GetDedicatedIpPoolResult getDedicatedIpPool(GetDedicatedIpPoolRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieve information about the dedicated pool.
    
    Specified by:
    
    getDedicatedIpPool in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to obtain more information about a dedicated IP pool.
    
    Returns:
    
    Result of the GetDedicatedIpPool operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getDedicatedIps
```
public GetDedicatedIpsResult getDedicatedIps(GetDedicatedIpsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    List the dedicated IP addresses that are associated with your Amazon Web Services account.
    
    Specified by:
    
    getDedicatedIps in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to obtain more information about dedicated IP pools.
    
    Returns:
    
    Result of the GetDedicatedIps operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getDeliverabilityDashboardOptions
```
public GetDeliverabilityDashboardOptionsResult getDeliverabilityDashboardOptions(GetDeliverabilityDashboardOptionsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieve information about the status of the Deliverability dashboard for your account. When the Deliverability dashboard is enabled, you gain access to reputation, deliverability, and other metrics for the domains that you use to send email. You also gain the ability to perform predictive inbox placement tests.
    
    When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon SES Pricing.
    
    Specified by:
    
    getDeliverabilityDashboardOptions in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Retrieve information about the status of the Deliverability dashboard for your Amazon Web Services account. When the Deliverability dashboard is enabled, you gain access to reputation, deliverability, and other metrics for your domains. You also gain the ability to perform predictive inbox placement tests.
    
    When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon Pinpoint Pricing.
    
    Returns:
    
    Result of the GetDeliverabilityDashboardOptions operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getDeliverabilityTestReport
```
public GetDeliverabilityTestReportResult getDeliverabilityTestReport(GetDeliverabilityTestReportRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieve the results of a predictive inbox placement test.
    
    Specified by:
    
    getDeliverabilityTestReport in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to retrieve the results of a predictive inbox placement test.
    
    Returns:
    
    Result of the GetDeliverabilityTestReport operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getDomainDeliverabilityCampaign
```
public GetDomainDeliverabilityCampaignResult getDomainDeliverabilityCampaign(GetDomainDeliverabilityCampaignRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieve all the deliverability data for a specific campaign. This data is available for a campaign only if the campaign sent email by using a domain that the Deliverability dashboard is enabled for.
    
    Specified by:
    
    getDomainDeliverabilityCampaign in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Retrieve all the deliverability data for a specific campaign. This data is available for a campaign only if the campaign sent email by using a domain that the Deliverability dashboard is enabled for ( PutDeliverabilityDashboardOption operation).
    
    Returns:
    
    Result of the GetDomainDeliverabilityCampaign operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getDomainStatisticsReport
```
public GetDomainStatisticsReportResult getDomainStatisticsReport(GetDomainStatisticsReportRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieve inbox placement and engagement rates for the domains that you use to send email.
    
    Specified by:
    
    getDomainStatisticsReport in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to obtain deliverability metrics for a domain.
    
    Returns:
    
    Result of the GetDomainStatisticsReport operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getEmailIdentity
```
public GetEmailIdentityResult getEmailIdentity(GetEmailIdentityRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Provides information about a specific identity, including the identity's verification status, sending authorization policies, its DKIM authentication status, and its custom Mail-From settings.
    
    Specified by:
    
    getEmailIdentity in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to return details about an email identity.
    
    Returns:
    
    Result of the GetEmailIdentity operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getEmailIdentityPolicies
```
public GetEmailIdentityPoliciesResult getEmailIdentityPolicies(GetEmailIdentityPoliciesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.
    
    This API is for the identity owner only. If you have not verified the identity, this API will return an error.
    
    Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    getEmailIdentityPolicies in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to return the policies of an email identity.
    
    Returns:
    
    Result of the GetEmailIdentityPolicies operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getEmailTemplate
```
public GetEmailTemplateResult getEmailTemplate(GetEmailTemplateRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Displays the template object (which includes the subject line, HTML part and text part) for the template you specify.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    getEmailTemplate in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to display the template object (which includes the subject line, HTML part and text part) for the template you specify.
    
    Returns:
    
    Result of the GetEmailTemplate operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getImportJob
```
public GetImportJobResult getImportJob(GetImportJobRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Provides information about an import job.
    
    Specified by:
    
    getImportJob in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request for information about an import job using the import job ID.
    
    Returns:
    
    Result of the GetImportJob operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - getSuppressedDestination
```
public GetSuppressedDestinationResult getSuppressedDestination(GetSuppressedDestinationRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieves information about a specific email address that's on the suppression list for your account.
    
    Specified by:
    
    getSuppressedDestination in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to retrieve information about an email address that's on the suppression list for your account.
    
    Returns:
    
    Result of the GetSuppressedDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listConfigurationSets
```
public ListConfigurationSetsResult listConfigurationSets(ListConfigurationSetsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    List all of the configuration sets associated with your account in the current region.
    
    Configuration sets are groups of rules that you can apply to the emails you send. You apply a configuration set to an email by including a reference to the configuration set in the headers of the email. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.
    
    Specified by:
    
    listConfigurationSets in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to obtain a list of configuration sets for your Amazon SES account in the current Amazon Web Services Region.
    
    Returns:
    
    Result of the ListConfigurationSets operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listContactLists
```
public ListContactListsResult listContactLists(ListContactListsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Lists all of the contact lists available.
    
    Specified by:
    
    listContactLists in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the ListContactLists operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listContacts
```
public ListContactsResult listContacts(ListContactsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Lists the contacts present in a specific contact list.
    
    Specified by:
    
    listContacts in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the ListContacts operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listCustomVerificationEmailTemplates
```
public ListCustomVerificationEmailTemplatesResult listCustomVerificationEmailTemplates(ListCustomVerificationEmailTemplatesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Lists the existing custom verification email templates for your account in the current Amazon Web Services Region.
    
    For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    listCustomVerificationEmailTemplates in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to list the existing custom verification email templates for your account.
    
    Returns:
    
    Result of the ListCustomVerificationEmailTemplates operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listDedicatedIpPools
```
public ListDedicatedIpPoolsResult listDedicatedIpPools(ListDedicatedIpPoolsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    List all of the dedicated IP pools that exist in your Amazon Web Services account in the current Region.
    
    Specified by:
    
    listDedicatedIpPools in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to obtain a list of dedicated IP pools.
    
    Returns:
    
    Result of the ListDedicatedIpPools operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listDeliverabilityTestReports
```
public ListDeliverabilityTestReportsResult listDeliverabilityTestReports(ListDeliverabilityTestReportsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Show a list of the predictive inbox placement tests that you've performed, regardless of their statuses. For predictive inbox placement tests that are complete, you can use the GetDeliverabilityTestReport operation to view the results.
    
    Specified by:
    
    listDeliverabilityTestReports in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to list all of the predictive inbox placement tests that you've performed.
    
    Returns:
    
    Result of the ListDeliverabilityTestReports operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listDomainDeliverabilityCampaigns
```
public ListDomainDeliverabilityCampaignsResult listDomainDeliverabilityCampaigns(ListDomainDeliverabilityCampaignsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range. This data is available for a domain only if you enabled the Deliverability dashboard for the domain.
    
    Specified by:
    
    listDomainDeliverabilityCampaigns in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range. This data is available for a domain only if you enabled the Deliverability dashboard.
    
    Returns:
    
    Result of the ListDomainDeliverabilityCampaigns operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listEmailIdentities
```
public ListEmailIdentitiesResult listEmailIdentities(ListEmailIdentitiesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Returns a list of all of the email identities that are associated with your Amazon Web Services account. An identity can be either an email address or a domain. This operation returns identities that are verified as well as those that aren't. This operation returns identities that are associated with Amazon SES and Amazon Pinpoint.
    
    Specified by:
    
    listEmailIdentities in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to list all of the email identities associated with your Amazon Web Services account. This list includes identities that you've already verified, identities that are unverified, and identities that were verified in the past, but are no longer verified.
    
    Returns:
    
    Result of the ListEmailIdentities operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listEmailTemplates
```
public ListEmailTemplatesResult listEmailTemplates(ListEmailTemplatesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Lists the email templates present in your Amazon SES account in the current Amazon Web Services Region.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    listEmailTemplates in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to list the email templates present in your Amazon SES account in the current Amazon Web Services Region. For more information, see the Amazon SES Developer Guide.
    
    Returns:
    
    Result of the ListEmailTemplates operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listImportJobs
```
public ListImportJobsResult listImportJobs(ListImportJobsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Lists all of the import jobs.
    
    Specified by:
    
    listImportJobs in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to list all of the import jobs for a data destination within the specified maximum number of import jobs.
    
    Returns:
    
    Result of the ListImportJobs operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listRecommendations
```
public ListRecommendationsResult listRecommendations(ListRecommendationsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Lists the recommendations present in your Amazon SES account in the current Amazon Web Services Region.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    listRecommendations in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to list the existing recommendations for your account.
    
    Returns:
    
    Result of the ListRecommendations operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listSuppressedDestinations
```
public ListSuppressedDestinationsResult listSuppressedDestinations(ListSuppressedDestinationsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieves a list of email addresses that are on the suppression list for your account.
    
    Specified by:
    
    listSuppressedDestinations in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to obtain a list of email destinations that are on the suppression list for your account.
    
    Returns:
    
    Result of the ListSuppressedDestinations operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
public ListTagsForResourceResult listTagsForResource(ListTagsForResourceRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Retrieve a list of the tags (keys and values) that are associated with a specified resource. A tag is a label that you optionally define and associate with a resource. Each tag consists of a required tag key and an optional associated tag value. A tag key is a general label that acts as a category for more specific tag values. A tag value acts as a descriptor within a tag key.
    
    Specified by:
    
    listTagsForResource in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putAccountDedicatedIpWarmupAttributes
```
public PutAccountDedicatedIpWarmupAttributesResult putAccountDedicatedIpWarmupAttributes(PutAccountDedicatedIpWarmupAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Enable or disable the automatic warm-up feature for dedicated IP addresses.
    
    Specified by:
    
    putAccountDedicatedIpWarmupAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to enable or disable the automatic IP address warm-up feature.
    
    Returns:
    
    Result of the PutAccountDedicatedIpWarmupAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putAccountDetails
```
public PutAccountDetailsResult putAccountDetails(PutAccountDetailsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Update your Amazon SES account details.
    
    Specified by:
    
    putAccountDetails in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to submit new account details.
    
    Returns:
    
    Result of the PutAccountDetails operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putAccountSendingAttributes
```
public PutAccountSendingAttributesResult putAccountSendingAttributes(PutAccountSendingAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Enable or disable the ability of your account to send email.
    
    Specified by:
    
    putAccountSendingAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to change the ability of your account to send email.
    
    Returns:
    
    Result of the PutAccountSendingAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putAccountSuppressionAttributes
```
public PutAccountSuppressionAttributesResult putAccountSuppressionAttributes(PutAccountSuppressionAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Change the settings for the account-level suppression list.
    
    Specified by:
    
    putAccountSuppressionAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to change your account's suppression preferences.
    
    Returns:
    
    Result of the PutAccountSuppressionAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putAccountVdmAttributes
```
public PutAccountVdmAttributesResult putAccountVdmAttributes(PutAccountVdmAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Update your Amazon SES account VDM attributes.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    putAccountVdmAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to submit new account VDM attributes.
    
    Returns:
    
    Result of the PutAccountVdmAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putConfigurationSetDeliveryOptions
```
public PutConfigurationSetDeliveryOptionsResult putConfigurationSetDeliveryOptions(PutConfigurationSetDeliveryOptionsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Associate a configuration set with a dedicated IP pool. You can use dedicated IP pools to create groups of dedicated IP addresses for sending specific types of email.
    
    Specified by:
    
    putConfigurationSetDeliveryOptions in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to associate a configuration set with a dedicated IP pool.
    
    Returns:
    
    Result of the PutConfigurationSetDeliveryOptions operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putConfigurationSetReputationOptions
```
public PutConfigurationSetReputationOptionsResult putConfigurationSetReputationOptions(PutConfigurationSetReputationOptionsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Enable or disable collection of reputation metrics for emails that you send using a particular configuration set in a specific Amazon Web Services Region.
    
    Specified by:
    
    putConfigurationSetReputationOptions in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to enable or disable tracking of reputation metrics for a configuration set.
    
    Returns:
    
    Result of the PutConfigurationSetReputationOptions operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putConfigurationSetSendingOptions
```
public PutConfigurationSetSendingOptionsResult putConfigurationSetSendingOptions(PutConfigurationSetSendingOptionsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Enable or disable email sending for messages that use a particular configuration set in a specific Amazon Web Services Region.
    
    Specified by:
    
    putConfigurationSetSendingOptions in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to enable or disable the ability of Amazon SES to send emails that use a specific configuration set.
    
    Returns:
    
    Result of the PutConfigurationSetSendingOptions operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putConfigurationSetSuppressionOptions
```
public PutConfigurationSetSuppressionOptionsResult putConfigurationSetSuppressionOptions(PutConfigurationSetSuppressionOptionsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Specify the account suppression list preferences for a configuration set.
    
    Specified by:
    
    putConfigurationSetSuppressionOptions in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to change the account suppression list preferences for a specific configuration set.
    
    Returns:
    
    Result of the PutConfigurationSetSuppressionOptions operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putConfigurationSetTrackingOptions
```
public PutConfigurationSetTrackingOptionsResult putConfigurationSetTrackingOptions(PutConfigurationSetTrackingOptionsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Specify a custom domain to use for open and click tracking elements in email that you send.
    
    Specified by:
    
    putConfigurationSetTrackingOptions in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to add a custom domain for tracking open and click events to a configuration set.
    
    Returns:
    
    Result of the PutConfigurationSetTrackingOptions operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putConfigurationSetVdmOptions
```
public PutConfigurationSetVdmOptionsResult putConfigurationSetVdmOptions(PutConfigurationSetVdmOptionsRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Specify VDM preferences for email that you send using the configuration set.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    putConfigurationSetVdmOptions in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to add specific VDM settings to a configuration set.
    
    Returns:
    
    Result of the PutConfigurationSetVdmOptions operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putDedicatedIpInPool
```
public PutDedicatedIpInPoolResult putDedicatedIpInPool(PutDedicatedIpInPoolRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Move a dedicated IP address to an existing dedicated IP pool.
    
    The dedicated IP address that you specify must already exist, and must be associated with your Amazon Web Services account.
    
    The dedicated IP pool you specify must already exist. You can create a new pool by using the CreateDedicatedIpPool operation.
    
    Specified by:
    
    putDedicatedIpInPool in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to move a dedicated IP address to a dedicated IP pool.
    
    Returns:
    
    Result of the PutDedicatedIpInPool operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putDedicatedIpPoolScalingAttributes
```
public PutDedicatedIpPoolScalingAttributesResult putDedicatedIpPoolScalingAttributes(PutDedicatedIpPoolScalingAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Used to convert a dedicated IP pool to a different scaling mode.
    
    MANAGED pools cannot be converted to STANDARD scaling mode.
    
    Specified by:
    
    putDedicatedIpPoolScalingAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to convert a dedicated IP pool to a different scaling mode.
    
    Returns:
    
    Result of the PutDedicatedIpPoolScalingAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putDedicatedIpWarmupAttributes
```
public PutDedicatedIpWarmupAttributesResult putDedicatedIpWarmupAttributes(PutDedicatedIpWarmupAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Specified by:
    
    putDedicatedIpWarmupAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to change the warm-up attributes for a dedicated IP address. This operation is useful when you want to resume the warm-up process for an existing IP address.
    
    Returns:
    
    Result of the PutDedicatedIpWarmupAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putDeliverabilityDashboardOption
```
public PutDeliverabilityDashboardOptionResult putDeliverabilityDashboardOption(PutDeliverabilityDashboardOptionRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Enable or disable the Deliverability dashboard. When you enable the Deliverability dashboard, you gain access to reputation, deliverability, and other metrics for the domains that you use to send email. You also gain the ability to perform predictive inbox placement tests.
    
    When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon SES Pricing.
    
    Specified by:
    
    putDeliverabilityDashboardOption in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Enable or disable the Deliverability dashboard. When you enable the Deliverability dashboard, you gain access to reputation, deliverability, and other metrics for the domains that you use to send email using Amazon SES API v2. You also gain the ability to perform predictive inbox placement tests.
    
    When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon Pinpoint Pricing.
    
    Returns:
    
    Result of the PutDeliverabilityDashboardOption operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putEmailIdentityConfigurationSetAttributes
```
public PutEmailIdentityConfigurationSetAttributesResult putEmailIdentityConfigurationSetAttributes(PutEmailIdentityConfigurationSetAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Used to associate a configuration set with an email identity.
    
    Specified by:
    
    putEmailIdentityConfigurationSetAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to associate a configuration set with an email identity.
    
    Returns:
    
    Result of the PutEmailIdentityConfigurationSetAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putEmailIdentityDkimAttributes
```
public PutEmailIdentityDkimAttributesResult putEmailIdentityDkimAttributes(PutEmailIdentityDkimAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Used to enable or disable DKIM authentication for an email identity.
    
    Specified by:
    
    putEmailIdentityDkimAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to enable or disable DKIM signing of email that you send from an email identity.
    
    Returns:
    
    Result of the PutEmailIdentityDkimAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putEmailIdentityDkimSigningAttributes
```
public PutEmailIdentityDkimSigningAttributesResult putEmailIdentityDkimSigningAttributes(PutEmailIdentityDkimSigningAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    Used to configure or change the DKIM authentication settings for an email domain identity. You can use this operation to do any of the following:
    - Update the signing attributes for an identity that uses Bring Your Own DKIM (BYODKIM).
    - Update the key length that should be used for Easy DKIM.
    - Change from using no DKIM authentication to using Easy DKIM.
    - Change from using no DKIM authentication to using BYODKIM.
    - Change from using Easy DKIM to using BYODKIM.
    - Change from using BYODKIM to using Easy DKIM.
    Specified by:
    
    putEmailIdentityDkimSigningAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to change the DKIM attributes for an email identity.
    
    Returns:
    
    Result of the PutEmailIdentityDkimSigningAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putEmailIdentityFeedbackAttributes
```
public PutEmailIdentityFeedbackAttributesResult putEmailIdentityFeedbackAttributes(PutEmailIdentityFeedbackAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Used to enable or disable feedback forwarding for an identity. This setting determines what happens when an identity is used to send an email that results in a bounce or complaint event.
    
    If the value is true, you receive email notifications when bounce or complaint events occur. These notifications are sent to the address that you specified in the Return-Path header of the original email.
    
    You're required to have a method of tracking bounces and complaints. If you haven't set up another mechanism for receiving bounce or complaint notifications (for example, by setting up an event destination), you receive an email notification when these events occur (even if this setting is disabled).
    
    Specified by:
    
    putEmailIdentityFeedbackAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to set the attributes that control how bounce and complaint events are processed.
    
    Returns:
    
    Result of the PutEmailIdentityFeedbackAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putEmailIdentityMailFromAttributes
```
public PutEmailIdentityMailFromAttributesResult putEmailIdentityMailFromAttributes(PutEmailIdentityMailFromAttributesRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Used to enable or disable the custom Mail-From domain configuration for an email identity.
    
    Specified by:
    
    putEmailIdentityMailFromAttributes in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to configure the custom MAIL FROM domain for a verified identity.
    
    Returns:
    
    Result of the PutEmailIdentityMailFromAttributes operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - putSuppressedDestination
```
public PutSuppressedDestinationResult putSuppressedDestination(PutSuppressedDestinationRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Adds an email address to the suppression list for your account.
    
    Specified by:
    
    putSuppressedDestination in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to add an email destination to the suppression list for your account.
    
    Returns:
    
    Result of the PutSuppressedDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - sendBulkEmail
```
public SendBulkEmailResult sendBulkEmail(SendBulkEmailRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Composes an email message to multiple destinations.
    
    Specified by:
    
    sendBulkEmail in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to send email messages to multiple destinations using Amazon SES. For more information, see the Amazon SES Developer Guide.
    
    Returns:
    
    Result of the SendBulkEmail operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - sendCustomVerificationEmail
```
public SendCustomVerificationEmailResult sendCustomVerificationEmail(SendCustomVerificationEmailRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Adds an email address to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address.
    
    To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    sendCustomVerificationEmail in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to send a custom verification email to a specified recipient.
    
    Returns:
    
    Result of the SendCustomVerificationEmail operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - sendEmail
```
public SendEmailResult sendEmail(SendEmailRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    Sends an email message. You can use the Amazon SES API v2 to send the following types of messages:
    - Simple – A standard email message. When you create this type of message, you specify the sender, the recipient, and the message body, and Amazon SES assembles the message for you.
    - Raw – A raw, MIME-formatted email message. When you send this type of email, you have to specify all of the message headers, as well as the message body. You can use this message type to send messages that contain attachments. The message that you specify has to be a valid MIME message.
    - Templated – A message that contains personalization tags. When you send this type of email, Amazon SES API v2 automatically replaces the tags with values that you specify.
    Specified by:
    
    sendEmail in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to send a single formatted email using Amazon SES. For more information, see the Amazon SES Developer Guide.
    
    Returns:
    
    Result of the SendEmail operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
public TagResourceResult tagResource(TagResourceRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Add one or more tags (keys and values) to a specified resource. A tag is a label that you optionally define and associate with a resource. Tags can help you categorize and manage resources in different ways, such as by purpose, owner, environment, or other criteria. A resource can have as many as 50 tags.
    
    Each tag consists of a required tag key and an associated tag value, both of which you define. A tag key is a general label that acts as a category for more specific tag values. A tag value acts as a descriptor within a tag key.
    
    Specified by:
    
    tagResource in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - testRenderEmailTemplate
```
public TestRenderEmailTemplateResult testRenderEmailTemplate(TestRenderEmailTemplateRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Creates a preview of the MIME content of an email when provided with a template and a set of replacement data.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    testRenderEmailTemplate in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - >Represents a request to create a preview of the MIME content of an email when provided with a template and a set of replacement data.
    
    Returns:
    
    Result of the TestRenderEmailTemplate operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
public UntagResourceResult untagResource(UntagResourceRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Remove one or more tags (keys and values) from a specified resource.
    
    Specified by:
    
    untagResource in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateConfigurationSetEventDestination
```
public UpdateConfigurationSetEventDestinationResult updateConfigurationSetEventDestination(UpdateConfigurationSetEventDestinationRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Update the configuration of an event destination for a configuration set.
    
    Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon SNS to receive notifications when you receive bounces or complaints, or you can use Amazon Kinesis Data Firehose to stream data to Amazon S3 for long-term storage.
    
    Specified by:
    
    updateConfigurationSetEventDestination in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - A request to change the settings for an event destination for a configuration set.
    
    Returns:
    
    Result of the UpdateConfigurationSetEventDestination operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateContact
```
public UpdateContactResult updateContact(UpdateContactRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Updates a contact's preferences for a list. It is not necessary to specify all existing topic preferences in the TopicPreferences object, just the ones that need updating.
    
    Specified by:
    
    updateContact in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the UpdateContact operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateContactList
```
public UpdateContactListResult updateContactList(UpdateContactListRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Updates contact list metadata. This operation does a complete replacement.
    
    Specified by:
    
    updateContactList in interface AmazonSimpleEmailServiceV2
    
    Returns:
    
    Result of the UpdateContactList operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateCustomVerificationEmailTemplate
```
public UpdateCustomVerificationEmailTemplateResult updateCustomVerificationEmailTemplate(UpdateCustomVerificationEmailTemplateRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Updates an existing custom verification email template.
    
    For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    updateCustomVerificationEmailTemplate in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to update an existing custom verification email template.
    
    Returns:
    
    Result of the UpdateCustomVerificationEmailTemplate operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateEmailIdentityPolicy
```
public UpdateEmailIdentityPolicyResult updateEmailIdentityPolicy(UpdateEmailIdentityPolicyRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Updates the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.
    
    This API is for the identity owner only. If you have not verified the identity, this API will return an error.
    
    Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    updateEmailIdentityPolicy in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to update a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.
    
    Returns:
    
    Result of the UpdateEmailIdentityPolicy operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - updateEmailTemplate
```
public UpdateEmailTemplateResult updateEmailTemplate(UpdateEmailTemplateRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide.
    
    You can execute this operation no more than once per second.
    
    Specified by:
    
    updateEmailTemplate in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - Represents a request to update an email template. For more information, see the Amazon SES Developer Guide.
    
    Returns:
    
    Result of the UpdateEmailTemplate operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - shutdown
```
public void shutdown()
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Shuts down this client object, releasing any resources that might be held open. This is an optional method, and callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client has been shutdown, it should not be used to make any more requests.
    
    Specified by:
    
    shutdown in interface AmazonSimpleEmailServiceV2
  - getCachedResponseMetadata
```
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)
```
    Description copied from interface: AmazonSimpleEmailServiceV2
    
    Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected. This data isn't considered part of the result data returned by an operation, so it's available through this separate, diagnostic interface.
    Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.
    
    Specified by:
    
    getCachedResponseMetadata in interface AmazonSimpleEmailServiceV2
    
    Parameters:
    
    request - The originally executed request.
    
    Returns:
    
    The response metadata for the specified request, or null if none is available.

AWS SDK for Java 1.x API Reference - 1.12.525

Class AbstractAmazonSimpleEmailServiceV2

Field Summary

Fields inherited from interface com.amazonaws.services.simpleemailv2.AmazonSimpleEmailServiceV2

Method Summary

Methods inherited from class java.lang.Object

Method Detail

batchGetMetricData

createConfigurationSet

createConfigurationSetEventDestination

createContact

createContactList

createCustomVerificationEmailTemplate

createDedicatedIpPool

createDeliverabilityTestReport

createEmailIdentity

createEmailIdentityPolicy

createEmailTemplate

createImportJob

deleteConfigurationSet

deleteConfigurationSetEventDestination

deleteContact

deleteContactList

deleteCustomVerificationEmailTemplate

deleteDedicatedIpPool

deleteEmailIdentity

deleteEmailIdentityPolicy

deleteEmailTemplate

deleteSuppressedDestination

getAccount

getBlacklistReports

getConfigurationSet

getConfigurationSetEventDestinations

getContact

getContactList

getCustomVerificationEmailTemplate

getDedicatedIp

getDedicatedIpPool

getDedicatedIps

getDeliverabilityDashboardOptions

getDeliverabilityTestReport

getDomainDeliverabilityCampaign

getDomainStatisticsReport

getEmailIdentity

getEmailIdentityPolicies

getEmailTemplate

getImportJob

getSuppressedDestination

listConfigurationSets

listContactLists

listContacts

listCustomVerificationEmailTemplates

listDedicatedIpPools

listDeliverabilityTestReports

listDomainDeliverabilityCampaigns

listEmailIdentities

listEmailTemplates

listImportJobs

listRecommendations

listSuppressedDestinations

listTagsForResource

putAccountDedicatedIpWarmupAttributes

putAccountDetails

putAccountSendingAttributes

putAccountSuppressionAttributes

putAccountVdmAttributes

putConfigurationSetDeliveryOptions

putConfigurationSetReputationOptions

putConfigurationSetSendingOptions

putConfigurationSetSuppressionOptions

putConfigurationSetTrackingOptions

putConfigurationSetVdmOptions

putDedicatedIpInPool

putDedicatedIpPoolScalingAttributes

putDedicatedIpWarmupAttributes

putDeliverabilityDashboardOption

putEmailIdentityConfigurationSetAttributes

putEmailIdentityDkimAttributes

putEmailIdentityDkimSigningAttributes

putEmailIdentityFeedbackAttributes