@Generated(value="com.amazonaws:aws-java-sdk-code-generator") public class AbstractAmazonKinesisFirehoseAsync extends AbstractAmazonKinesisFirehose implements AmazonKinesisFirehoseAsync
AmazonKinesisFirehoseAsync. Convenient method forms pass through to the
corresponding overload that takes a request object and an AsyncHandler, which throws an
UnsupportedOperationException.ENDPOINT_PREFIXcreateDeliveryStream, deleteDeliveryStream, describeDeliveryStream, getCachedResponseMetadata, listDeliveryStreams, listTagsForDeliveryStream, putRecord, putRecordBatch, setEndpoint, setRegion, shutdown, startDeliveryStreamEncryption, stopDeliveryStreamEncryption, tagDeliveryStream, untagDeliveryStream, updateDestinationequals, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitcreateDeliveryStream, deleteDeliveryStream, describeDeliveryStream, getCachedResponseMetadata, listDeliveryStreams, listTagsForDeliveryStream, putRecord, putRecordBatch, setEndpoint, setRegion, shutdown, startDeliveryStreamEncryption, stopDeliveryStreamEncryption, tagDeliveryStream, untagDeliveryStream, updateDestinationpublic Future<CreateDeliveryStreamResult> createDeliveryStreamAsync(CreateDeliveryStreamRequest request)
AmazonKinesisFirehoseAsyncCreates a Kinesis Data Firehose delivery stream.
By default, you can create up to 50 delivery streams per Amazon Web Services Region.
This is an asynchronous operation that immediately returns. The initial status of the delivery stream is
CREATING. After the delivery stream is created, its status is ACTIVE and it now accepts
data. If the delivery stream creation fails, the status transitions to CREATING_FAILED. Attempts to
send data to a delivery stream that is not in the ACTIVE state cause an exception. To check the
state of a delivery stream, use DescribeDeliveryStream.
If the status of a delivery stream is CREATING_FAILED, this status doesn't change, and you can't
invoke CreateDeliveryStream again on it. However, you can invoke the DeleteDeliveryStream
operation to delete it.
A Kinesis Data Firehose delivery stream can be configured to receive records directly from providers using
PutRecord or PutRecordBatch, or it can be configured to use an existing Kinesis stream as its
source. To specify a Kinesis data stream as input, set the DeliveryStreamType parameter to
KinesisStreamAsSource, and provide the Kinesis stream Amazon Resource Name (ARN) and role ARN in the
KinesisStreamSourceConfiguration parameter.
To create a delivery stream with server-side encryption (SSE) enabled, include DeliveryStreamEncryptionConfigurationInput in your request. This is optional. You can also invoke StartDeliveryStreamEncryption to turn on SSE for an existing delivery stream that doesn't have SSE enabled.
A delivery stream is configured with a single destination: Amazon S3, Amazon ES, Amazon Redshift, or Splunk. You
must specify only one of the following destination configuration parameters:
ExtendedS3DestinationConfiguration, S3DestinationConfiguration,
ElasticsearchDestinationConfiguration, RedshiftDestinationConfiguration, or
SplunkDestinationConfiguration.
When you specify S3DestinationConfiguration, you can also provide the following optional values:
BufferingHints, EncryptionConfiguration, and CompressionFormat. By default, if no
BufferingHints value is provided, Kinesis Data Firehose buffers data up to 5 MB or for 5 minutes,
whichever condition is satisfied first. BufferingHints is a hint, so there are some cases where the
service cannot adhere to these conditions strictly. For example, record boundaries might be such that the size is
a little over or under the configured buffering size. By default, no encryption is performed. We strongly
recommend that you enable encryption to ensure secure data storage in Amazon S3.
A few notes about Amazon Redshift as a destination:
An Amazon Redshift destination requires an S3 bucket as intermediate location. Kinesis Data Firehose first
delivers data to Amazon S3 and then uses COPY syntax to load data into an Amazon Redshift table.
This is specified in the RedshiftDestinationConfiguration.S3Configuration parameter.
The compression formats SNAPPY or ZIP cannot be specified in
RedshiftDestinationConfiguration.S3Configuration because the Amazon Redshift COPY
operation that reads from the S3 bucket doesn't support these compression formats.
We strongly recommend that you use the user name and password you provide exclusively with Kinesis Data Firehose,
and that the permissions for the account are restricted for Amazon Redshift INSERT permissions.
Kinesis Data Firehose assumes the IAM role that is configured as part of the destination. The role should allow the Kinesis Data Firehose principal to assume the role, and the role should have permissions that allow the service to deliver the data. For more information, see Grant Kinesis Data Firehose Access to an Amazon S3 Destination in the Amazon Kinesis Data Firehose Developer Guide.
createDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncpublic Future<CreateDeliveryStreamResult> createDeliveryStreamAsync(CreateDeliveryStreamRequest request, AsyncHandler<CreateDeliveryStreamRequest,CreateDeliveryStreamResult> asyncHandler)
AmazonKinesisFirehoseAsyncCreates a Kinesis Data Firehose delivery stream.
By default, you can create up to 50 delivery streams per Amazon Web Services Region.
This is an asynchronous operation that immediately returns. The initial status of the delivery stream is
CREATING. After the delivery stream is created, its status is ACTIVE and it now accepts
data. If the delivery stream creation fails, the status transitions to CREATING_FAILED. Attempts to
send data to a delivery stream that is not in the ACTIVE state cause an exception. To check the
state of a delivery stream, use DescribeDeliveryStream.
If the status of a delivery stream is CREATING_FAILED, this status doesn't change, and you can't
invoke CreateDeliveryStream again on it. However, you can invoke the DeleteDeliveryStream
operation to delete it.
A Kinesis Data Firehose delivery stream can be configured to receive records directly from providers using
PutRecord or PutRecordBatch, or it can be configured to use an existing Kinesis stream as its
source. To specify a Kinesis data stream as input, set the DeliveryStreamType parameter to
KinesisStreamAsSource, and provide the Kinesis stream Amazon Resource Name (ARN) and role ARN in the
KinesisStreamSourceConfiguration parameter.
To create a delivery stream with server-side encryption (SSE) enabled, include DeliveryStreamEncryptionConfigurationInput in your request. This is optional. You can also invoke StartDeliveryStreamEncryption to turn on SSE for an existing delivery stream that doesn't have SSE enabled.
A delivery stream is configured with a single destination: Amazon S3, Amazon ES, Amazon Redshift, or Splunk. You
must specify only one of the following destination configuration parameters:
ExtendedS3DestinationConfiguration, S3DestinationConfiguration,
ElasticsearchDestinationConfiguration, RedshiftDestinationConfiguration, or
SplunkDestinationConfiguration.
When you specify S3DestinationConfiguration, you can also provide the following optional values:
BufferingHints, EncryptionConfiguration, and CompressionFormat. By default, if no
BufferingHints value is provided, Kinesis Data Firehose buffers data up to 5 MB or for 5 minutes,
whichever condition is satisfied first. BufferingHints is a hint, so there are some cases where the
service cannot adhere to these conditions strictly. For example, record boundaries might be such that the size is
a little over or under the configured buffering size. By default, no encryption is performed. We strongly
recommend that you enable encryption to ensure secure data storage in Amazon S3.
A few notes about Amazon Redshift as a destination:
An Amazon Redshift destination requires an S3 bucket as intermediate location. Kinesis Data Firehose first
delivers data to Amazon S3 and then uses COPY syntax to load data into an Amazon Redshift table.
This is specified in the RedshiftDestinationConfiguration.S3Configuration parameter.
The compression formats SNAPPY or ZIP cannot be specified in
RedshiftDestinationConfiguration.S3Configuration because the Amazon Redshift COPY
operation that reads from the S3 bucket doesn't support these compression formats.
We strongly recommend that you use the user name and password you provide exclusively with Kinesis Data Firehose,
and that the permissions for the account are restricted for Amazon Redshift INSERT permissions.
Kinesis Data Firehose assumes the IAM role that is configured as part of the destination. The role should allow the Kinesis Data Firehose principal to assume the role, and the role should have permissions that allow the service to deliver the data. For more information, see Grant Kinesis Data Firehose Access to an Amazon S3 Destination in the Amazon Kinesis Data Firehose Developer Guide.
createDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeleteDeliveryStreamResult> deleteDeliveryStreamAsync(DeleteDeliveryStreamRequest request)
AmazonKinesisFirehoseAsyncDeletes a delivery stream and its data.
To check the state of a delivery stream, use DescribeDeliveryStream. You can delete a delivery stream only
if it is in one of the following states: ACTIVE, DELETING, CREATING_FAILED
, or DELETING_FAILED. You can't delete a delivery stream that is in the CREATING state.
While the deletion request is in process, the delivery stream is in the DELETING state.
While the delivery stream is in the DELETING state, the service might continue to accept records,
but it doesn't make any guarantees with respect to delivering the data. Therefore, as a best practice, first stop
any applications that are sending records before you delete a delivery stream.
deleteDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncpublic Future<DeleteDeliveryStreamResult> deleteDeliveryStreamAsync(DeleteDeliveryStreamRequest request, AsyncHandler<DeleteDeliveryStreamRequest,DeleteDeliveryStreamResult> asyncHandler)
AmazonKinesisFirehoseAsyncDeletes a delivery stream and its data.
To check the state of a delivery stream, use DescribeDeliveryStream. You can delete a delivery stream only
if it is in one of the following states: ACTIVE, DELETING, CREATING_FAILED
, or DELETING_FAILED. You can't delete a delivery stream that is in the CREATING state.
While the deletion request is in process, the delivery stream is in the DELETING state.
While the delivery stream is in the DELETING state, the service might continue to accept records,
but it doesn't make any guarantees with respect to delivering the data. Therefore, as a best practice, first stop
any applications that are sending records before you delete a delivery stream.
deleteDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeDeliveryStreamResult> describeDeliveryStreamAsync(DescribeDeliveryStreamRequest request)
AmazonKinesisFirehoseAsync
Describes the specified delivery stream and its status. For example, after your delivery stream is created, call
DescribeDeliveryStream to see whether the delivery stream is ACTIVE and therefore ready
for data to be sent to it.
If the status of a delivery stream is CREATING_FAILED, this status doesn't change, and you can't
invoke CreateDeliveryStream again on it. However, you can invoke the DeleteDeliveryStream operation
to delete it. If the status is DELETING_FAILED, you can force deletion by invoking
DeleteDeliveryStream again but with DeleteDeliveryStreamInput$AllowForceDelete set to true.
describeDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncpublic Future<DescribeDeliveryStreamResult> describeDeliveryStreamAsync(DescribeDeliveryStreamRequest request, AsyncHandler<DescribeDeliveryStreamRequest,DescribeDeliveryStreamResult> asyncHandler)
AmazonKinesisFirehoseAsync
Describes the specified delivery stream and its status. For example, after your delivery stream is created, call
DescribeDeliveryStream to see whether the delivery stream is ACTIVE and therefore ready
for data to be sent to it.
If the status of a delivery stream is CREATING_FAILED, this status doesn't change, and you can't
invoke CreateDeliveryStream again on it. However, you can invoke the DeleteDeliveryStream operation
to delete it. If the status is DELETING_FAILED, you can force deletion by invoking
DeleteDeliveryStream again but with DeleteDeliveryStreamInput$AllowForceDelete set to true.
describeDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ListDeliveryStreamsResult> listDeliveryStreamsAsync(ListDeliveryStreamsRequest request)
AmazonKinesisFirehoseAsyncLists your delivery streams in alphabetical order of their names.
The number of delivery streams might be too large to return using a single call to
ListDeliveryStreams. You can limit the number of delivery streams returned, using the
Limit parameter. To determine whether there are more delivery streams to list, check the value of
HasMoreDeliveryStreams in the output. If there are more delivery streams to list, you can request
them by calling this operation again and setting the ExclusiveStartDeliveryStreamName parameter to
the name of the last delivery stream returned in the last call.
listDeliveryStreamsAsync in interface AmazonKinesisFirehoseAsyncpublic Future<ListDeliveryStreamsResult> listDeliveryStreamsAsync(ListDeliveryStreamsRequest request, AsyncHandler<ListDeliveryStreamsRequest,ListDeliveryStreamsResult> asyncHandler)
AmazonKinesisFirehoseAsyncLists your delivery streams in alphabetical order of their names.
The number of delivery streams might be too large to return using a single call to
ListDeliveryStreams. You can limit the number of delivery streams returned, using the
Limit parameter. To determine whether there are more delivery streams to list, check the value of
HasMoreDeliveryStreams in the output. If there are more delivery streams to list, you can request
them by calling this operation again and setting the ExclusiveStartDeliveryStreamName parameter to
the name of the last delivery stream returned in the last call.
listDeliveryStreamsAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ListTagsForDeliveryStreamResult> listTagsForDeliveryStreamAsync(ListTagsForDeliveryStreamRequest request)
AmazonKinesisFirehoseAsyncLists the tags for the specified delivery stream. This operation has a limit of five transactions per second per account.
listTagsForDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncpublic Future<ListTagsForDeliveryStreamResult> listTagsForDeliveryStreamAsync(ListTagsForDeliveryStreamRequest request, AsyncHandler<ListTagsForDeliveryStreamRequest,ListTagsForDeliveryStreamResult> asyncHandler)
AmazonKinesisFirehoseAsyncLists the tags for the specified delivery stream. This operation has a limit of five transactions per second per account.
listTagsForDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<PutRecordResult> putRecordAsync(PutRecordRequest request)
AmazonKinesisFirehoseAsyncWrites a single data record into an Amazon Kinesis Data Firehose delivery stream. To write multiple data records into a delivery stream, use PutRecordBatch. Applications using these operations are referred to as producers.
By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5 MB per second. If you use PutRecord and PutRecordBatch, the limits are an aggregate across these two operations for each delivery stream. For more information about limits and how to request an increase, see Amazon Kinesis Data Firehose Limits.
You must specify the name of the delivery stream and the data record when using PutRecord. The data record consists of a data blob that can be up to 1,000 KiB in size, and any kind of data. For example, it can be a segment from a log file, geographic location data, website clickstream data, and so on.
Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs
at the destination, a common solution is to use delimiters in the data, such as a newline (\n) or
some other character unique within the data. This allows the consumer application to parse individual data items
when reading the data from the destination.
The PutRecord operation returns a RecordId, which is a unique string assigned to each
record. Producer applications can use this ID for purposes such as auditability and investigation.
If the PutRecord operation throws a ServiceUnavailableException, back off and retry. If
the exception persists, it is possible that the throughput limits have been exceeded for the delivery stream.
Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery stream as it tries to send the records to the destination. If the destination is unreachable for more than 24 hours, the data is no longer available.
Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the raw data, then perform base64 encoding.
putRecordAsync in interface AmazonKinesisFirehoseAsyncpublic Future<PutRecordResult> putRecordAsync(PutRecordRequest request, AsyncHandler<PutRecordRequest,PutRecordResult> asyncHandler)
AmazonKinesisFirehoseAsyncWrites a single data record into an Amazon Kinesis Data Firehose delivery stream. To write multiple data records into a delivery stream, use PutRecordBatch. Applications using these operations are referred to as producers.
By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5 MB per second. If you use PutRecord and PutRecordBatch, the limits are an aggregate across these two operations for each delivery stream. For more information about limits and how to request an increase, see Amazon Kinesis Data Firehose Limits.
You must specify the name of the delivery stream and the data record when using PutRecord. The data record consists of a data blob that can be up to 1,000 KiB in size, and any kind of data. For example, it can be a segment from a log file, geographic location data, website clickstream data, and so on.
Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs
at the destination, a common solution is to use delimiters in the data, such as a newline (\n) or
some other character unique within the data. This allows the consumer application to parse individual data items
when reading the data from the destination.
The PutRecord operation returns a RecordId, which is a unique string assigned to each
record. Producer applications can use this ID for purposes such as auditability and investigation.
If the PutRecord operation throws a ServiceUnavailableException, back off and retry. If
the exception persists, it is possible that the throughput limits have been exceeded for the delivery stream.
Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery stream as it tries to send the records to the destination. If the destination is unreachable for more than 24 hours, the data is no longer available.
Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the raw data, then perform base64 encoding.
putRecordAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<PutRecordBatchResult> putRecordBatchAsync(PutRecordBatchRequest request)
AmazonKinesisFirehoseAsyncWrites multiple data records into a delivery stream in a single call, which can achieve higher throughput per producer than when writing single records. To write single data records into a delivery stream, use PutRecord. Applications using these operations are referred to as producers.
For information about service quota, see Amazon Kinesis Data Firehose Quota.
Each PutRecordBatch request supports up to 500 records. Each record in the request can be as large as 1,000 KB (before base64 encoding), up to a limit of 4 MB for the entire request. These limits cannot be changed.
You must specify the name of the delivery stream and the data record when using PutRecord. The data record consists of a data blob that can be up to 1,000 KB in size, and any kind of data. For example, it could be a segment from a log file, geographic location data, website clickstream data, and so on.
Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs
at the destination, a common solution is to use delimiters in the data, such as a newline (\n) or
some other character unique within the data. This allows the consumer application to parse individual data items
when reading the data from the destination.
The PutRecordBatch response includes a count of failed records, FailedPutCount, and an array
of responses, RequestResponses. Even if the PutRecordBatch call succeeds, the value of
FailedPutCount may be greater than 0, indicating that there are records for which the operation
didn't succeed. Each entry in the RequestResponses array provides additional information about the
processed record. It directly correlates with a record in the request array using the same ordering, from the top
to the bottom. The response array always includes the same number of records as the request array.
RequestResponses includes both successfully and unsuccessfully processed records. Kinesis Data
Firehose tries to process all records in each PutRecordBatch request. A single record failure does not
stop the processing of subsequent records.
A successfully processed record includes a RecordId value, which is unique for the record. An
unsuccessfully processed record includes ErrorCode and ErrorMessage values.
ErrorCode reflects the type of error, and is one of the following values:
ServiceUnavailableException or InternalFailure. ErrorMessage provides more
detailed information about the error.
If there is an internal server error or a timeout, the write might have completed or it might have failed. If
FailedPutCount is greater than 0, retry the request, resending only those records that might have
failed processing. This minimizes the possible duplicate records and also reduces the total bytes sent (and
corresponding charges). We recommend that you handle any duplicates at the destination.
If PutRecordBatch throws ServiceUnavailableException, back off and retry. If the exception
persists, it is possible that the throughput limits have been exceeded for the delivery stream.
Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery stream as it attempts to send the records to the destination. If the destination is unreachable for more than 24 hours, the data is no longer available.
Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the raw data, then perform base64 encoding.
putRecordBatchAsync in interface AmazonKinesisFirehoseAsyncpublic Future<PutRecordBatchResult> putRecordBatchAsync(PutRecordBatchRequest request, AsyncHandler<PutRecordBatchRequest,PutRecordBatchResult> asyncHandler)
AmazonKinesisFirehoseAsyncWrites multiple data records into a delivery stream in a single call, which can achieve higher throughput per producer than when writing single records. To write single data records into a delivery stream, use PutRecord. Applications using these operations are referred to as producers.
For information about service quota, see Amazon Kinesis Data Firehose Quota.
Each PutRecordBatch request supports up to 500 records. Each record in the request can be as large as 1,000 KB (before base64 encoding), up to a limit of 4 MB for the entire request. These limits cannot be changed.
You must specify the name of the delivery stream and the data record when using PutRecord. The data record consists of a data blob that can be up to 1,000 KB in size, and any kind of data. For example, it could be a segment from a log file, geographic location data, website clickstream data, and so on.
Kinesis Data Firehose buffers records before delivering them to the destination. To disambiguate the data blobs
at the destination, a common solution is to use delimiters in the data, such as a newline (\n) or
some other character unique within the data. This allows the consumer application to parse individual data items
when reading the data from the destination.
The PutRecordBatch response includes a count of failed records, FailedPutCount, and an array
of responses, RequestResponses. Even if the PutRecordBatch call succeeds, the value of
FailedPutCount may be greater than 0, indicating that there are records for which the operation
didn't succeed. Each entry in the RequestResponses array provides additional information about the
processed record. It directly correlates with a record in the request array using the same ordering, from the top
to the bottom. The response array always includes the same number of records as the request array.
RequestResponses includes both successfully and unsuccessfully processed records. Kinesis Data
Firehose tries to process all records in each PutRecordBatch request. A single record failure does not
stop the processing of subsequent records.
A successfully processed record includes a RecordId value, which is unique for the record. An
unsuccessfully processed record includes ErrorCode and ErrorMessage values.
ErrorCode reflects the type of error, and is one of the following values:
ServiceUnavailableException or InternalFailure. ErrorMessage provides more
detailed information about the error.
If there is an internal server error or a timeout, the write might have completed or it might have failed. If
FailedPutCount is greater than 0, retry the request, resending only those records that might have
failed processing. This minimizes the possible duplicate records and also reduces the total bytes sent (and
corresponding charges). We recommend that you handle any duplicates at the destination.
If PutRecordBatch throws ServiceUnavailableException, back off and retry. If the exception
persists, it is possible that the throughput limits have been exceeded for the delivery stream.
Data records sent to Kinesis Data Firehose are stored for 24 hours from the time they are added to a delivery stream as it attempts to send the records to the destination. If the destination is unreachable for more than 24 hours, the data is no longer available.
Don't concatenate two or more base64 strings to form the data fields of your records. Instead, concatenate the raw data, then perform base64 encoding.
putRecordBatchAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<StartDeliveryStreamEncryptionResult> startDeliveryStreamEncryptionAsync(StartDeliveryStreamEncryptionRequest request)
AmazonKinesisFirehoseAsyncEnables server-side encryption (SSE) for the delivery stream.
This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the
encryption status of the stream to ENABLING, and then to ENABLED. The encryption status
of a delivery stream is the Status property in DeliveryStreamEncryptionConfiguration. If the
operation fails, the encryption status changes to ENABLING_FAILED. You can continue to read and
write data to your delivery stream while the encryption status is ENABLING, but the data is not
encrypted. It can take up to 5 seconds after the encryption status changes to ENABLED before all
records written to the delivery stream are encrypted. To find out whether a record or a batch of records was
encrypted, check the response elements PutRecordOutput$Encrypted and
PutRecordBatchOutput$Encrypted, respectively.
To check the encryption status of a delivery stream, use DescribeDeliveryStream.
Even if encryption is currently enabled for a delivery stream, you can still invoke this operation on it to
change the ARN of the CMK or both its type and ARN. If you invoke this method to change the CMK, and the old CMK
is of type CUSTOMER_MANAGED_CMK, Kinesis Data Firehose schedules the grant it had on the old CMK for
retirement. If the new CMK is of type CUSTOMER_MANAGED_CMK, Kinesis Data Firehose creates a grant
that enables it to use the new CMK to encrypt and decrypt data and to manage the grant.
If a delivery stream already has encryption enabled and then you invoke this operation to change the ARN of the
CMK or both its type and ARN and you get ENABLING_FAILED, this only means that the attempt to change
the CMK failed. In this case, encryption remains enabled with the old CMK.
If the encryption status of your delivery stream is ENABLING_FAILED, you can invoke this operation
again with a valid CMK. The CMK must be enabled and the key policy mustn't explicitly deny the permission for
Kinesis Data Firehose to invoke KMS encrypt and decrypt operations.
You can enable SSE for a delivery stream only if it's a delivery stream that uses DirectPut as its
source.
The StartDeliveryStreamEncryption and StopDeliveryStreamEncryption operations have a
combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call
StartDeliveryStreamEncryption 13 times and StopDeliveryStreamEncryption 12 times for
the same delivery stream in a 24-hour period.
startDeliveryStreamEncryptionAsync in interface AmazonKinesisFirehoseAsyncpublic Future<StartDeliveryStreamEncryptionResult> startDeliveryStreamEncryptionAsync(StartDeliveryStreamEncryptionRequest request, AsyncHandler<StartDeliveryStreamEncryptionRequest,StartDeliveryStreamEncryptionResult> asyncHandler)
AmazonKinesisFirehoseAsyncEnables server-side encryption (SSE) for the delivery stream.
This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the
encryption status of the stream to ENABLING, and then to ENABLED. The encryption status
of a delivery stream is the Status property in DeliveryStreamEncryptionConfiguration. If the
operation fails, the encryption status changes to ENABLING_FAILED. You can continue to read and
write data to your delivery stream while the encryption status is ENABLING, but the data is not
encrypted. It can take up to 5 seconds after the encryption status changes to ENABLED before all
records written to the delivery stream are encrypted. To find out whether a record or a batch of records was
encrypted, check the response elements PutRecordOutput$Encrypted and
PutRecordBatchOutput$Encrypted, respectively.
To check the encryption status of a delivery stream, use DescribeDeliveryStream.
Even if encryption is currently enabled for a delivery stream, you can still invoke this operation on it to
change the ARN of the CMK or both its type and ARN. If you invoke this method to change the CMK, and the old CMK
is of type CUSTOMER_MANAGED_CMK, Kinesis Data Firehose schedules the grant it had on the old CMK for
retirement. If the new CMK is of type CUSTOMER_MANAGED_CMK, Kinesis Data Firehose creates a grant
that enables it to use the new CMK to encrypt and decrypt data and to manage the grant.
If a delivery stream already has encryption enabled and then you invoke this operation to change the ARN of the
CMK or both its type and ARN and you get ENABLING_FAILED, this only means that the attempt to change
the CMK failed. In this case, encryption remains enabled with the old CMK.
If the encryption status of your delivery stream is ENABLING_FAILED, you can invoke this operation
again with a valid CMK. The CMK must be enabled and the key policy mustn't explicitly deny the permission for
Kinesis Data Firehose to invoke KMS encrypt and decrypt operations.
You can enable SSE for a delivery stream only if it's a delivery stream that uses DirectPut as its
source.
The StartDeliveryStreamEncryption and StopDeliveryStreamEncryption operations have a
combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call
StartDeliveryStreamEncryption 13 times and StopDeliveryStreamEncryption 12 times for
the same delivery stream in a 24-hour period.
startDeliveryStreamEncryptionAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<StopDeliveryStreamEncryptionResult> stopDeliveryStreamEncryptionAsync(StopDeliveryStreamEncryptionRequest request)
AmazonKinesisFirehoseAsyncDisables server-side encryption (SSE) for the delivery stream.
This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the
encryption status of the stream to DISABLING, and then to DISABLED. You can continue to
read and write data to your stream while its status is DISABLING. It can take up to 5 seconds after
the encryption status changes to DISABLED before all records written to the delivery stream are no
longer subject to encryption. To find out whether a record or a batch of records was encrypted, check the
response elements PutRecordOutput$Encrypted and PutRecordBatchOutput$Encrypted, respectively.
To check the encryption state of a delivery stream, use DescribeDeliveryStream.
If SSE is enabled using a customer managed CMK and then you invoke StopDeliveryStreamEncryption,
Kinesis Data Firehose schedules the related KMS grant for retirement and then retires it after it ensures that it
is finished delivering records to the destination.
The StartDeliveryStreamEncryption and StopDeliveryStreamEncryption operations have a
combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call
StartDeliveryStreamEncryption 13 times and StopDeliveryStreamEncryption 12 times for
the same delivery stream in a 24-hour period.
stopDeliveryStreamEncryptionAsync in interface AmazonKinesisFirehoseAsyncpublic Future<StopDeliveryStreamEncryptionResult> stopDeliveryStreamEncryptionAsync(StopDeliveryStreamEncryptionRequest request, AsyncHandler<StopDeliveryStreamEncryptionRequest,StopDeliveryStreamEncryptionResult> asyncHandler)
AmazonKinesisFirehoseAsyncDisables server-side encryption (SSE) for the delivery stream.
This operation is asynchronous. It returns immediately. When you invoke it, Kinesis Data Firehose first sets the
encryption status of the stream to DISABLING, and then to DISABLED. You can continue to
read and write data to your stream while its status is DISABLING. It can take up to 5 seconds after
the encryption status changes to DISABLED before all records written to the delivery stream are no
longer subject to encryption. To find out whether a record or a batch of records was encrypted, check the
response elements PutRecordOutput$Encrypted and PutRecordBatchOutput$Encrypted, respectively.
To check the encryption state of a delivery stream, use DescribeDeliveryStream.
If SSE is enabled using a customer managed CMK and then you invoke StopDeliveryStreamEncryption,
Kinesis Data Firehose schedules the related KMS grant for retirement and then retires it after it ensures that it
is finished delivering records to the destination.
The StartDeliveryStreamEncryption and StopDeliveryStreamEncryption operations have a
combined limit of 25 calls per delivery stream per 24 hours. For example, you reach the limit if you call
StartDeliveryStreamEncryption 13 times and StopDeliveryStreamEncryption 12 times for
the same delivery stream in a 24-hour period.
stopDeliveryStreamEncryptionAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<TagDeliveryStreamResult> tagDeliveryStreamAsync(TagDeliveryStreamRequest request)
AmazonKinesisFirehoseAsyncAdds or updates tags for the specified delivery stream. A tag is a key-value pair that you can define and assign to Amazon Web Services resources. If you specify a tag that already exists, the tag value is replaced with the value that you specify in the request. Tags are metadata. For example, you can add friendly names and descriptions or other types of information that can help you distinguish the delivery stream. For more information about tags, see Using Cost Allocation Tags in the Amazon Web Services Billing and Cost Management User Guide.
Each delivery stream can have up to 50 tags.
This operation has a limit of five transactions per second per account.
tagDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncpublic Future<TagDeliveryStreamResult> tagDeliveryStreamAsync(TagDeliveryStreamRequest request, AsyncHandler<TagDeliveryStreamRequest,TagDeliveryStreamResult> asyncHandler)
AmazonKinesisFirehoseAsyncAdds or updates tags for the specified delivery stream. A tag is a key-value pair that you can define and assign to Amazon Web Services resources. If you specify a tag that already exists, the tag value is replaced with the value that you specify in the request. Tags are metadata. For example, you can add friendly names and descriptions or other types of information that can help you distinguish the delivery stream. For more information about tags, see Using Cost Allocation Tags in the Amazon Web Services Billing and Cost Management User Guide.
Each delivery stream can have up to 50 tags.
This operation has a limit of five transactions per second per account.
tagDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UntagDeliveryStreamResult> untagDeliveryStreamAsync(UntagDeliveryStreamRequest request)
AmazonKinesisFirehoseAsyncRemoves tags from the specified delivery stream. Removed tags are deleted, and you can't recover them after this operation successfully completes.
If you specify a tag that doesn't exist, the operation ignores it.
This operation has a limit of five transactions per second per account.
untagDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncpublic Future<UntagDeliveryStreamResult> untagDeliveryStreamAsync(UntagDeliveryStreamRequest request, AsyncHandler<UntagDeliveryStreamRequest,UntagDeliveryStreamResult> asyncHandler)
AmazonKinesisFirehoseAsyncRemoves tags from the specified delivery stream. Removed tags are deleted, and you can't recover them after this operation successfully completes.
If you specify a tag that doesn't exist, the operation ignores it.
This operation has a limit of five transactions per second per account.
untagDeliveryStreamAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateDestinationResult> updateDestinationAsync(UpdateDestinationRequest request)
AmazonKinesisFirehoseAsyncUpdates the specified destination of the specified delivery stream.
Use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while the configurations are updated, so data writes to the delivery stream can continue during this process. The updated configurations are usually effective within a few minutes.
Switching between Amazon ES and other services is not supported. For an Amazon ES destination, you can only update to another Amazon ES destination.
If the destination type is the same, Kinesis Data Firehose merges the configuration parameters specified with the
destination configuration that already exists on the delivery stream. If any of the parameters are not specified
in the call, the existing values are retained. For example, in the Amazon S3 destination, if
EncryptionConfiguration is not specified, then the existing EncryptionConfiguration is
maintained on the destination.
If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift, Kinesis Data Firehose does not merge any parameters. In this case, all parameters must be specified.
Kinesis Data Firehose uses CurrentDeliveryStreamVersionId to avoid race conditions and conflicting
merges. This is a required field, and the service updates the configuration only if the existing configuration
has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be
retrieved using DescribeDeliveryStream. Use the new version ID to set
CurrentDeliveryStreamVersionId in the next call.
updateDestinationAsync in interface AmazonKinesisFirehoseAsyncpublic Future<UpdateDestinationResult> updateDestinationAsync(UpdateDestinationRequest request, AsyncHandler<UpdateDestinationRequest,UpdateDestinationResult> asyncHandler)
AmazonKinesisFirehoseAsyncUpdates the specified destination of the specified delivery stream.
Use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while the configurations are updated, so data writes to the delivery stream can continue during this process. The updated configurations are usually effective within a few minutes.
Switching between Amazon ES and other services is not supported. For an Amazon ES destination, you can only update to another Amazon ES destination.
If the destination type is the same, Kinesis Data Firehose merges the configuration parameters specified with the
destination configuration that already exists on the delivery stream. If any of the parameters are not specified
in the call, the existing values are retained. For example, in the Amazon S3 destination, if
EncryptionConfiguration is not specified, then the existing EncryptionConfiguration is
maintained on the destination.
If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift, Kinesis Data Firehose does not merge any parameters. In this case, all parameters must be specified.
Kinesis Data Firehose uses CurrentDeliveryStreamVersionId to avoid race conditions and conflicting
merges. This is a required field, and the service updates the configuration only if the existing configuration
has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be
retrieved using DescribeDeliveryStream. Use the new version ID to set
CurrentDeliveryStreamVersionId in the next call.
updateDestinationAsync in interface AmazonKinesisFirehoseAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.