@Generated(value="com.amazonaws:aws-java-sdk-code-generator") public class AbstractAmazonEventBridge extends Object implements AmazonEventBridge
AmazonEventBridge. Convenient method forms pass through to the corresponding
overload that takes a request object, which throws an UnsupportedOperationException.ENDPOINT_PREFIX| Modifier and Type | Method and Description |
|---|---|
ActivateEventSourceResult |
activateEventSource(ActivateEventSourceRequest request)
Activates a partner event source that has been deactivated.
|
CancelReplayResult |
cancelReplay(CancelReplayRequest request)
Cancels the specified replay.
|
CreateApiDestinationResult |
createApiDestination(CreateApiDestinationRequest request)
Creates an API destination, which is an HTTP invocation endpoint configured as a target for events.
|
CreateArchiveResult |
createArchive(CreateArchiveRequest request)
Creates an archive of events with the specified settings.
|
CreateConnectionResult |
createConnection(CreateConnectionRequest request)
Creates a connection.
|
CreateEndpointResult |
createEndpoint(CreateEndpointRequest request)
Creates a global endpoint.
|
CreateEventBusResult |
createEventBus(CreateEventBusRequest request)
Creates a new event bus within your account.
|
CreatePartnerEventSourceResult |
createPartnerEventSource(CreatePartnerEventSourceRequest request)
Called by an SaaS partner to create a partner event source.
|
DeactivateEventSourceResult |
deactivateEventSource(DeactivateEventSourceRequest request)
You can use this operation to temporarily stop receiving events from the specified partner event source.
|
DeauthorizeConnectionResult |
deauthorizeConnection(DeauthorizeConnectionRequest request)
Removes all authorization parameters from the connection.
|
DeleteApiDestinationResult |
deleteApiDestination(DeleteApiDestinationRequest request)
Deletes the specified API destination.
|
DeleteArchiveResult |
deleteArchive(DeleteArchiveRequest request)
Deletes the specified archive.
|
DeleteConnectionResult |
deleteConnection(DeleteConnectionRequest request)
Deletes a connection.
|
DeleteEndpointResult |
deleteEndpoint(DeleteEndpointRequest request)
Delete an existing global endpoint.
|
DeleteEventBusResult |
deleteEventBus(DeleteEventBusRequest request)
Deletes the specified custom event bus or partner event bus.
|
DeletePartnerEventSourceResult |
deletePartnerEventSource(DeletePartnerEventSourceRequest request)
This operation is used by SaaS partners to delete a partner event source.
|
DeleteRuleResult |
deleteRule(DeleteRuleRequest request)
Deletes the specified rule.
|
DescribeApiDestinationResult |
describeApiDestination(DescribeApiDestinationRequest request)
Retrieves details about an API destination.
|
DescribeArchiveResult |
describeArchive(DescribeArchiveRequest request)
Retrieves details about an archive.
|
DescribeConnectionResult |
describeConnection(DescribeConnectionRequest request)
Retrieves details about a connection.
|
DescribeEndpointResult |
describeEndpoint(DescribeEndpointRequest request)
Get the information about an existing global endpoint.
|
DescribeEventBusResult |
describeEventBus(DescribeEventBusRequest request)
Displays details about an event bus in your account.
|
DescribeEventSourceResult |
describeEventSource(DescribeEventSourceRequest request)
This operation lists details about a partner event source that is shared with your account.
|
DescribePartnerEventSourceResult |
describePartnerEventSource(DescribePartnerEventSourceRequest request)
An SaaS partner can use this operation to list details about a partner event source that they have created.
|
DescribeReplayResult |
describeReplay(DescribeReplayRequest request)
Retrieves details about a replay.
|
DescribeRuleResult |
describeRule(DescribeRuleRequest request)
Describes the specified rule.
|
DisableRuleResult |
disableRule(DisableRuleRequest request)
Disables the specified rule.
|
EnableRuleResult |
enableRule(EnableRuleRequest request)
Enables the specified rule.
|
ResponseMetadata |
getCachedResponseMetadata(AmazonWebServiceRequest request)
Returns additional metadata for a previously executed successful request, typically used for debugging issues
where a service isn't acting as expected.
|
ListApiDestinationsResult |
listApiDestinations(ListApiDestinationsRequest request)
Retrieves a list of API destination in the account in the current Region.
|
ListArchivesResult |
listArchives(ListArchivesRequest request)
Lists your archives.
|
ListConnectionsResult |
listConnections(ListConnectionsRequest request)
Retrieves a list of connections from the account.
|
ListEndpointsResult |
listEndpoints(ListEndpointsRequest request)
List the global endpoints associated with this account.
|
ListEventBusesResult |
listEventBuses(ListEventBusesRequest request)
Lists all the event buses in your account, including the default event bus, custom event buses, and partner event
buses.
|
ListEventSourcesResult |
listEventSources(ListEventSourcesRequest request)
You can use this to see all the partner event sources that have been shared with your Amazon Web Services
account.
|
ListPartnerEventSourceAccountsResult |
listPartnerEventSourceAccounts(ListPartnerEventSourceAccountsRequest request)
An SaaS partner can use this operation to display the Amazon Web Services account ID that a particular partner
event source name is associated with.
|
ListPartnerEventSourcesResult |
listPartnerEventSources(ListPartnerEventSourcesRequest request)
An SaaS partner can use this operation to list all the partner event source names that they have created.
|
ListReplaysResult |
listReplays(ListReplaysRequest request)
Lists your replays.
|
ListRuleNamesByTargetResult |
listRuleNamesByTarget(ListRuleNamesByTargetRequest request)
Lists the rules for the specified target.
|
ListRulesResult |
listRules(ListRulesRequest request)
Lists your Amazon EventBridge rules.
|
ListTagsForResourceResult |
listTagsForResource(ListTagsForResourceRequest request)
Displays the tags associated with an EventBridge resource.
|
ListTargetsByRuleResult |
listTargetsByRule(ListTargetsByRuleRequest request)
Lists the targets assigned to the specified rule.
|
PutEventsResult |
putEvents(PutEventsRequest request)
Sends custom events to Amazon EventBridge so that they can be matched to rules.
|
PutPartnerEventsResult |
putPartnerEvents(PutPartnerEventsRequest request)
This is used by SaaS partners to write events to a customer's partner event bus.
|
PutPermissionResult |
putPermission(PutPermissionRequest request)
Running
PutPermission permits the specified Amazon Web Services account or Amazon Web Services
organization to put events to the specified event bus. |
PutRuleResult |
putRule(PutRuleRequest request)
Creates or updates the specified rule.
|
PutTargetsResult |
putTargets(PutTargetsRequest request)
Adds the specified targets to the specified rule, or updates the targets if they are already associated with the
rule.
|
RemovePermissionResult |
removePermission(RemovePermissionRequest request)
Revokes the permission of another Amazon Web Services account to be able to put events to the specified event
bus.
|
RemoveTargetsResult |
removeTargets(RemoveTargetsRequest request)
Removes the specified targets from the specified rule.
|
void |
shutdown()
Shuts down this client object, releasing any resources that might be held open.
|
StartReplayResult |
startReplay(StartReplayRequest request)
Starts the specified replay.
|
TagResourceResult |
tagResource(TagResourceRequest request)
Assigns one or more tags (key-value pairs) to the specified EventBridge resource.
|
TestEventPatternResult |
testEventPattern(TestEventPatternRequest request)
Tests whether the specified event pattern matches the provided event.
|
UntagResourceResult |
untagResource(UntagResourceRequest request)
Removes one or more tags from the specified EventBridge resource.
|
UpdateApiDestinationResult |
updateApiDestination(UpdateApiDestinationRequest request)
Updates an API destination.
|
UpdateArchiveResult |
updateArchive(UpdateArchiveRequest request)
Updates the specified archive.
|
UpdateConnectionResult |
updateConnection(UpdateConnectionRequest request)
Updates settings for a connection.
|
UpdateEndpointResult |
updateEndpoint(UpdateEndpointRequest request)
Update an existing endpoint.
|
public ActivateEventSourceResult activateEventSource(ActivateEventSourceRequest request)
AmazonEventBridgeActivates a partner event source that has been deactivated. Once activated, your matching event bus will start receiving events from the event source.
activateEventSource in interface AmazonEventBridgepublic CancelReplayResult cancelReplay(CancelReplayRequest request)
AmazonEventBridgeCancels the specified replay.
cancelReplay in interface AmazonEventBridgepublic CreateApiDestinationResult createApiDestination(CreateApiDestinationRequest request)
AmazonEventBridgeCreates an API destination, which is an HTTP invocation endpoint configured as a target for events.
API destinations do not support private destinations, such as interface VPC endpoints.
For more information, see API destinations in the EventBridge User Guide.
createApiDestination in interface AmazonEventBridgepublic CreateArchiveResult createArchive(CreateArchiveRequest request)
AmazonEventBridgeCreates an archive of events with the specified settings. When you create an archive, incoming events might not immediately start being sent to the archive. Allow a short period of time for changes to take effect. If you do not specify a pattern to filter events sent to the archive, all events are sent to the archive except replayed events. Replayed events are not sent to an archive.
createArchive in interface AmazonEventBridgepublic CreateConnectionResult createConnection(CreateConnectionRequest request)
AmazonEventBridgeCreates a connection. A connection defines the authorization type and credentials to use for authorization with an API destination HTTP endpoint.
createConnection in interface AmazonEventBridgepublic CreateEndpointResult createEndpoint(CreateEndpointRequest request)
AmazonEventBridgeCreates a global endpoint. Global endpoints improve your application's availability by making it regional-fault tolerant. To do this, you define a primary and secondary Region with event buses in each Region. You also create a Amazon Route 53 health check that will tell EventBridge to route events to the secondary Region when an "unhealthy" state is encountered and events will be routed back to the primary Region when the health check reports a "healthy" state.
createEndpoint in interface AmazonEventBridgepublic CreateEventBusResult createEventBus(CreateEventBusRequest request)
AmazonEventBridgeCreates a new event bus within your account. This can be a custom event bus which you can use to receive events from your custom applications and services, or it can be a partner event bus which can be matched to a partner event source.
createEventBus in interface AmazonEventBridgepublic CreatePartnerEventSourceResult createPartnerEventSource(CreatePartnerEventSourceRequest request)
AmazonEventBridgeCalled by an SaaS partner to create a partner event source. This operation is not used by Amazon Web Services customers.
Each partner event source can be used by one Amazon Web Services account to create a matching partner event bus in that Amazon Web Services account. A SaaS partner must create one partner event source for each Amazon Web Services account that wants to receive those event types.
A partner event source creates events based on resources within the SaaS partner's service or application.
An Amazon Web Services account that creates a partner event bus that matches the partner event source can use that event bus to receive events from the partner, and then process them using Amazon Web Services Events rules and targets.
Partner event source names follow this format:
partner_name/event_namespace/event_name
partner_name is determined during partner registration, and identifies the partner to Amazon Web Services customers.
event_namespace is determined by the partner, and is a way for the partner to categorize their events.
event_name is determined by the partner, and should uniquely identify an event-generating resource within the partner system.
The event_name must be unique across all Amazon Web Services customers. This is because the event source is a shared resource between the partner and customer accounts, and each partner event source unique in the partner account.
The combination of event_namespace and event_name should help Amazon Web Services customers decide whether to create an event bus to receive these events.
createPartnerEventSource in interface AmazonEventBridgepublic DeactivateEventSourceResult deactivateEventSource(DeactivateEventSourceRequest request)
AmazonEventBridgeYou can use this operation to temporarily stop receiving events from the specified partner event source. The matching event bus is not deleted.
When you deactivate a partner event source, the source goes into PENDING state. If it remains in PENDING state for more than two weeks, it is deleted.
To activate a deactivated partner event source, use ActivateEventSource.
deactivateEventSource in interface AmazonEventBridgepublic DeauthorizeConnectionResult deauthorizeConnection(DeauthorizeConnectionRequest request)
AmazonEventBridgeRemoves all authorization parameters from the connection. This lets you remove the secret from the connection so you can reuse it without having to create a new connection.
deauthorizeConnection in interface AmazonEventBridgepublic DeleteApiDestinationResult deleteApiDestination(DeleteApiDestinationRequest request)
AmazonEventBridgeDeletes the specified API destination.
deleteApiDestination in interface AmazonEventBridgepublic DeleteArchiveResult deleteArchive(DeleteArchiveRequest request)
AmazonEventBridgeDeletes the specified archive.
deleteArchive in interface AmazonEventBridgepublic DeleteConnectionResult deleteConnection(DeleteConnectionRequest request)
AmazonEventBridgeDeletes a connection.
deleteConnection in interface AmazonEventBridgepublic DeleteEndpointResult deleteEndpoint(DeleteEndpointRequest request)
AmazonEventBridgeDelete an existing global endpoint. For more information about global endpoints, see Making applications Regional-fault tolerant with global endpoints and event replication in the Amazon EventBridge User Guide.
deleteEndpoint in interface AmazonEventBridgepublic DeleteEventBusResult deleteEventBus(DeleteEventBusRequest request)
AmazonEventBridgeDeletes the specified custom event bus or partner event bus. All rules associated with this event bus need to be deleted. You can't delete your account's default event bus.
deleteEventBus in interface AmazonEventBridgepublic DeletePartnerEventSourceResult deletePartnerEventSource(DeletePartnerEventSourceRequest request)
AmazonEventBridgeThis operation is used by SaaS partners to delete a partner event source. This operation is not used by Amazon Web Services customers.
When you delete an event source, the status of the corresponding partner event bus in the Amazon Web Services customer account becomes DELETED.
deletePartnerEventSource in interface AmazonEventBridgepublic DeleteRuleResult deleteRule(DeleteRuleRequest request)
AmazonEventBridgeDeletes the specified rule.
Before you can delete the rule, you must remove all targets, using RemoveTargets.
When you delete a rule, incoming events might continue to match to the deleted rule. Allow a short period of time for changes to take effect.
If you call delete rule multiple times for the same rule, all calls will succeed. When you call delete rule for a
non-existent custom eventbus, ResourceNotFoundException is returned.
Managed rules are rules created and managed by another Amazon Web Services service on your behalf. These rules
are created by those other Amazon Web Services services to support functionality in those services. You can
delete these rules using the Force option, but you should do so only if you are sure the other
service is not still using that rule.
deleteRule in interface AmazonEventBridgepublic DescribeApiDestinationResult describeApiDestination(DescribeApiDestinationRequest request)
AmazonEventBridgeRetrieves details about an API destination.
describeApiDestination in interface AmazonEventBridgepublic DescribeArchiveResult describeArchive(DescribeArchiveRequest request)
AmazonEventBridgeRetrieves details about an archive.
describeArchive in interface AmazonEventBridgepublic DescribeConnectionResult describeConnection(DescribeConnectionRequest request)
AmazonEventBridgeRetrieves details about a connection.
describeConnection in interface AmazonEventBridgepublic DescribeEndpointResult describeEndpoint(DescribeEndpointRequest request)
AmazonEventBridgeGet the information about an existing global endpoint. For more information about global endpoints, see Making applications Regional-fault tolerant with global endpoints and event replication in the Amazon EventBridge User Guide.
describeEndpoint in interface AmazonEventBridgepublic DescribeEventBusResult describeEventBus(DescribeEventBusRequest request)
AmazonEventBridgeDisplays details about an event bus in your account. This can include the external Amazon Web Services accounts that are permitted to write events to your default event bus, and the associated policy. For custom event buses and partner event buses, it displays the name, ARN, policy, state, and creation time.
To enable your account to receive events from other accounts on its default event bus, use PutPermission.
For more information about partner event buses, see CreateEventBus.
describeEventBus in interface AmazonEventBridgepublic DescribeEventSourceResult describeEventSource(DescribeEventSourceRequest request)
AmazonEventBridgeThis operation lists details about a partner event source that is shared with your account.
describeEventSource in interface AmazonEventBridgepublic DescribePartnerEventSourceResult describePartnerEventSource(DescribePartnerEventSourceRequest request)
AmazonEventBridgeAn SaaS partner can use this operation to list details about a partner event source that they have created. Amazon Web Services customers do not use this operation. Instead, Amazon Web Services customers can use DescribeEventSource to see details about a partner event source that is shared with them.
describePartnerEventSource in interface AmazonEventBridgepublic DescribeReplayResult describeReplay(DescribeReplayRequest request)
AmazonEventBridge
Retrieves details about a replay. Use DescribeReplay to determine the progress of a running replay.
A replay processes events to replay based on the time in the event, and replays them using 1 minute intervals. If
you use StartReplay and specify an EventStartTime and an EventEndTime that
covers a 20 minute time range, the events are replayed from the first minute of that 20 minute range first. Then
the events from the second minute are replayed. You can use DescribeReplay to determine the progress
of a replay. The value returned for EventLastReplayedTime indicates the time within the specified
time range associated with the last event replayed.
describeReplay in interface AmazonEventBridgepublic DescribeRuleResult describeRule(DescribeRuleRequest request)
AmazonEventBridgeDescribes the specified rule.
DescribeRule does not list the targets of a rule. To see the targets associated with a rule, use ListTargetsByRule.
describeRule in interface AmazonEventBridgepublic DisableRuleResult disableRule(DisableRuleRequest request)
AmazonEventBridgeDisables the specified rule. A disabled rule won't match any events, and won't self-trigger if it has a schedule expression.
When you disable a rule, incoming events might continue to match to the disabled rule. Allow a short period of time for changes to take effect.
disableRule in interface AmazonEventBridgepublic EnableRuleResult enableRule(EnableRuleRequest request)
AmazonEventBridgeEnables the specified rule. If the rule does not exist, the operation fails.
When you enable a rule, incoming events might not immediately start matching to a newly enabled rule. Allow a short period of time for changes to take effect.
enableRule in interface AmazonEventBridgepublic ListApiDestinationsResult listApiDestinations(ListApiDestinationsRequest request)
AmazonEventBridgeRetrieves a list of API destination in the account in the current Region.
listApiDestinations in interface AmazonEventBridgepublic ListArchivesResult listArchives(ListArchivesRequest request)
AmazonEventBridgeLists your archives. You can either list all the archives or you can provide a prefix to match to the archive names. Filter parameters are exclusive.
listArchives in interface AmazonEventBridgepublic ListConnectionsResult listConnections(ListConnectionsRequest request)
AmazonEventBridgeRetrieves a list of connections from the account.
listConnections in interface AmazonEventBridgepublic ListEndpointsResult listEndpoints(ListEndpointsRequest request)
AmazonEventBridgeList the global endpoints associated with this account. For more information about global endpoints, see Making applications Regional-fault tolerant with global endpoints and event replication in the Amazon EventBridge User Guide.
listEndpoints in interface AmazonEventBridgepublic ListEventBusesResult listEventBuses(ListEventBusesRequest request)
AmazonEventBridgeLists all the event buses in your account, including the default event bus, custom event buses, and partner event buses.
listEventBuses in interface AmazonEventBridgepublic ListEventSourcesResult listEventSources(ListEventSourcesRequest request)
AmazonEventBridgeYou can use this to see all the partner event sources that have been shared with your Amazon Web Services account. For more information about partner event sources, see CreateEventBus.
listEventSources in interface AmazonEventBridgepublic ListPartnerEventSourceAccountsResult listPartnerEventSourceAccounts(ListPartnerEventSourceAccountsRequest request)
AmazonEventBridgeAn SaaS partner can use this operation to display the Amazon Web Services account ID that a particular partner event source name is associated with. This operation is not used by Amazon Web Services customers.
listPartnerEventSourceAccounts in interface AmazonEventBridgepublic ListPartnerEventSourcesResult listPartnerEventSources(ListPartnerEventSourcesRequest request)
AmazonEventBridgeAn SaaS partner can use this operation to list all the partner event source names that they have created. This operation is not used by Amazon Web Services customers.
listPartnerEventSources in interface AmazonEventBridgepublic ListReplaysResult listReplays(ListReplaysRequest request)
AmazonEventBridgeLists your replays. You can either list all the replays or you can provide a prefix to match to the replay names. Filter parameters are exclusive.
listReplays in interface AmazonEventBridgepublic ListRuleNamesByTargetResult listRuleNamesByTarget(ListRuleNamesByTargetRequest request)
AmazonEventBridgeLists the rules for the specified target. You can see which of the rules in Amazon EventBridge can invoke a specific target in your account.
The maximum number of results per page for requests is 100.
listRuleNamesByTarget in interface AmazonEventBridgepublic ListRulesResult listRules(ListRulesRequest request)
AmazonEventBridgeLists your Amazon EventBridge rules. You can either list all the rules or you can provide a prefix to match to the rule names.
The maximum number of results per page for requests is 100.
ListRules does not list the targets of a rule. To see the targets associated with a rule, use ListTargetsByRule.
listRules in interface AmazonEventBridgepublic ListTagsForResourceResult listTagsForResource(ListTagsForResourceRequest request)
AmazonEventBridgeDisplays the tags associated with an EventBridge resource. In EventBridge, rules and event buses can be tagged.
listTagsForResource in interface AmazonEventBridgepublic ListTargetsByRuleResult listTargetsByRule(ListTargetsByRuleRequest request)
AmazonEventBridgeLists the targets assigned to the specified rule.
The maximum number of results per page for requests is 100.
listTargetsByRule in interface AmazonEventBridgepublic PutEventsResult putEvents(PutEventsRequest request)
AmazonEventBridgeSends custom events to Amazon EventBridge so that they can be matched to rules.
The maximum size for a PutEvents event entry is 256 KB. Entry size is calculated including the event and any necessary characters and keys of the JSON representation of the event. To learn more, see Calculating PutEvents event entry size in the Amazon EventBridge User Guide
PutEvents accepts the data in JSON format. For the JSON number (integer) data type, the constraints are: a minimum value of -9,223,372,036,854,775,808 and a maximum value of 9,223,372,036,854,775,807.
PutEvents will only process nested JSON up to 1100 levels deep.
putEvents in interface AmazonEventBridgepublic PutPartnerEventsResult putPartnerEvents(PutPartnerEventsRequest request)
AmazonEventBridgeThis is used by SaaS partners to write events to a customer's partner event bus. Amazon Web Services customers do not use this operation.
For information on calculating event batch size, see Calculating EventBridge PutEvents event entry size in the EventBridge User Guide.
putPartnerEvents in interface AmazonEventBridgepublic PutPermissionResult putPermission(PutPermissionRequest request)
AmazonEventBridge
Running PutPermission permits the specified Amazon Web Services account or Amazon Web Services
organization to put events to the specified event bus. Amazon EventBridge (CloudWatch Events) rules in
your account are triggered by these events arriving to an event bus in your account.
For another account to send events to your account, that external account must have an EventBridge rule with your account's event bus as a target.
To enable multiple Amazon Web Services accounts to put events to your event bus, run PutPermission
once for each of these accounts. Or, if all the accounts are members of the same Amazon Web Services
organization, you can run PutPermission once specifying Principal as "*" and specifying
the Amazon Web Services organization ID in Condition, to grant permissions to all accounts in that
organization.
If you grant permissions using an organization, then accounts in that organization must specify a
RoleArn with proper permissions when they use PutTarget to add your account's event bus
as a target. For more information, see Sending and Receiving Events Between Amazon Web Services Accounts in the Amazon EventBridge User
Guide.
The permission policy on the event bus cannot exceed 10 KB in size.
putPermission in interface AmazonEventBridgepublic PutRuleResult putRule(PutRuleRequest request)
AmazonEventBridgeCreates or updates the specified rule. Rules are enabled by default, or based on value of the state. You can disable a rule using DisableRule.
A single rule watches for events from a single event bus. Events generated by Amazon Web Services services go to your account's default event bus. Events generated by SaaS partner services or applications go to the matching partner event bus. If you have custom applications or services, you can specify whether their events go to your default event bus or a custom event bus that you have created. For more information, see CreateEventBus.
If you are updating an existing rule, the rule is replaced with what you specify in this PutRule
command. If you omit arguments in PutRule, the old values for those arguments are not kept. Instead,
they are replaced with null values.
When you create or update a rule, incoming events might not immediately start matching to new or updated rules. Allow a short period of time for changes to take effect.
A rule must contain at least an EventPattern or ScheduleExpression. Rules with EventPatterns are triggered when a matching event is observed. Rules with ScheduleExpressions self-trigger based on the given schedule. A rule can have both an EventPattern and a ScheduleExpression, in which case the rule triggers on matching events as well as on a schedule.
When you initially create a rule, you can optionally assign one or more tags to the rule. Tags can help you
organize and categorize your resources. You can also use them to scope user permissions, by granting a user
permission to access or change only rules with certain tag values. To use the PutRule operation and
assign tags, you must have both the events:PutRule and events:TagResource permissions.
If you are updating an existing rule, any tags you specify in the PutRule operation are ignored. To
update the tags of an existing rule, use TagResource and UntagResource.
Most services in Amazon Web Services treat : or / as the same character in Amazon Resource Names (ARNs). However, EventBridge uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.
In EventBridge, it is possible to create rules that lead to infinite loops, where a rule is fired repeatedly. For example, a rule might detect that ACLs have changed on an S3 bucket, and trigger software to change them to the desired state. If the rule is not written carefully, the subsequent change to the ACLs fires the rule again, creating an infinite loop.
To prevent this, write the rules so that the triggered actions do not re-fire the same rule. For example, your rule could fire only if ACLs are found to be in a bad state, instead of after any change.
An infinite loop can quickly cause higher than expected charges. We recommend that you use budgeting, which alerts you when charges exceed your specified limit. For more information, see Managing Your Costs with Budgets.
putRule in interface AmazonEventBridgepublic PutTargetsResult putTargets(PutTargetsRequest request)
AmazonEventBridgeAdds the specified targets to the specified rule, or updates the targets if they are already associated with the rule.
Targets are the resources that are invoked when a rule is triggered.
The maximum number of entries per request is 10.
Each rule can have up to five (5) targets associated with it at one time.
For a list of services you can configure as targets for events, see EventBridge targets in the Amazon EventBridge User Guide.
Creating rules with built-in targets is supported only in the Amazon Web Services Management Console. The built-in targets are:
Amazon EBS CreateSnapshot API call
Amazon EC2 RebootInstances API call
Amazon EC2 StopInstances API call
Amazon EC2 TerminateInstances API call
For some target types, PutTargets provides target-specific parameters. If the target is a Kinesis
data stream, you can optionally specify which shard the event goes to by using the KinesisParameters
argument. To invoke a command on multiple EC2 instances with one rule, you can use the
RunCommandParameters field.
To be able to make API calls against the resources that you own, Amazon EventBridge needs the appropriate permissions:
For Lambda and Amazon SNS resources, EventBridge relies on resource-based policies.
For EC2 instances, Kinesis Data Streams, Step Functions state machines and API Gateway APIs, EventBridge relies
on IAM roles that you specify in the RoleARN argument in PutTargets.
For more information, see Authentication and Access Control in the Amazon EventBridge User Guide.
If another Amazon Web Services account is in the same region and has granted you permission (using
PutPermission), you can send events to that account. Set that account's event bus as a target of the
rules in your account. To send the matched events to the other account, specify that account's event bus as the
Arn value when you run PutTargets. If your account sends events to another account,
your account is charged for each sent event. Each event sent to another account is charged as a custom event. The
account receiving the event is not charged. For more information, see Amazon EventBridge Pricing.
Input, InputPath, and InputTransformer are not available with
PutTarget if the target is an event bus of a different Amazon Web Services account.
If you are setting the event bus of another account as the target, and that account granted permission to your
account through an organization instead of directly by the account ID, then you must specify a
RoleArn with proper permissions in the Target structure. For more information, see
Sending and Receiving Events Between Amazon Web Services Accounts in the Amazon EventBridge User
Guide.
If you have an IAM role on a cross-account event bus target, a PutTargets call without a role on the
same target (same Id and Arn) will not remove the role.
For more information about enabling cross-account events, see PutPermission.
Input, InputPath, and InputTransformer are mutually exclusive and optional parameters of a target. When a rule is triggered due to a matched event:
If none of the following arguments are specified for a target, then the entire event is passed to the target in JSON format (unless the target is Amazon EC2 Run Command or Amazon ECS task, in which case nothing from the event is passed to the target).
If Input is specified in the form of valid JSON, then the matched event is overridden with this constant.
If InputPath is specified in the form of JSONPath (for example, $.detail), then only the part
of the event specified in the path is passed to the target (for example, only the detail part of the event is
passed).
If InputTransformer is specified, then one or more specified JSONPaths are extracted from the event and used as values in a template that you specify as the input to the target.
When you specify InputPath or InputTransformer, you must use JSON dot notation, not
bracket notation.
When you add targets to a rule and the associated rule triggers soon after, new or updated targets might not be immediately invoked. Allow a short period of time for changes to take effect.
This action can partially fail if too many requests are made at the same time. If that happens,
FailedEntryCount is non-zero in the response and each entry in FailedEntries provides
the ID of the failed target and the error code.
putTargets in interface AmazonEventBridgepublic RemovePermissionResult removePermission(RemovePermissionRequest request)
AmazonEventBridge
Revokes the permission of another Amazon Web Services account to be able to put events to the specified event
bus. Specify the account to revoke by the StatementId value that you associated with the account
when you granted it permission with PutPermission. You can find the StatementId by
using DescribeEventBus
.
removePermission in interface AmazonEventBridgepublic RemoveTargetsResult removeTargets(RemoveTargetsRequest request)
AmazonEventBridgeRemoves the specified targets from the specified rule. When the rule is triggered, those targets are no longer be invoked.
A successful execution of RemoveTargets doesn't guarantee all targets are removed from the rule, it
means that the target(s) listed in the request are removed.
When you remove a target, when the associated rule triggers, removed targets might continue to be invoked. Allow a short period of time for changes to take effect.
This action can partially fail if too many requests are made at the same time. If that happens,
FailedEntryCount is non-zero in the response and each entry in FailedEntries provides
the ID of the failed target and the error code.
The maximum number of entries per request is 10.
removeTargets in interface AmazonEventBridgepublic StartReplayResult startReplay(StartReplayRequest request)
AmazonEventBridge
Starts the specified replay. Events are not necessarily replayed in the exact same order that they were added to
the archive. A replay processes events to replay based on the time in the event, and replays them using 1 minute
intervals. If you specify an EventStartTime and an EventEndTime that covers a 20 minute
time range, the events are replayed from the first minute of that 20 minute range first. Then the events from the
second minute are replayed. You can use DescribeReplay to determine the progress of a replay. The
value returned for EventLastReplayedTime indicates the time within the specified time range
associated with the last event replayed.
startReplay in interface AmazonEventBridgepublic TagResourceResult tagResource(TagResourceRequest request)
AmazonEventBridgeAssigns one or more tags (key-value pairs) to the specified EventBridge resource. Tags can help you organize and categorize your resources. You can also use them to scope user permissions by granting a user permission to access or change only resources with certain tag values. In EventBridge, rules and event buses can be tagged.
Tags don't have any semantic meaning to Amazon Web Services and are interpreted strictly as strings of characters.
You can use the TagResource action with a resource that already has tags. If you specify a new tag
key, this tag is appended to the list of tags associated with the resource. If you specify a tag key that is
already associated with the resource, the new tag value that you specify replaces the previous value for that
tag.
You can associate as many as 50 tags with a resource.
tagResource in interface AmazonEventBridgepublic TestEventPatternResult testEventPattern(TestEventPatternRequest request)
AmazonEventBridgeTests whether the specified event pattern matches the provided event.
Most services in Amazon Web Services treat : or / as the same character in Amazon Resource Names (ARNs). However, EventBridge uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.
testEventPattern in interface AmazonEventBridgepublic UntagResourceResult untagResource(UntagResourceRequest request)
AmazonEventBridgeRemoves one or more tags from the specified EventBridge resource. In Amazon EventBridge (CloudWatch Events), rules and event buses can be tagged.
untagResource in interface AmazonEventBridgepublic UpdateApiDestinationResult updateApiDestination(UpdateApiDestinationRequest request)
AmazonEventBridgeUpdates an API destination.
updateApiDestination in interface AmazonEventBridgepublic UpdateArchiveResult updateArchive(UpdateArchiveRequest request)
AmazonEventBridgeUpdates the specified archive.
updateArchive in interface AmazonEventBridgepublic UpdateConnectionResult updateConnection(UpdateConnectionRequest request)
AmazonEventBridgeUpdates settings for a connection.
updateConnection in interface AmazonEventBridgepublic UpdateEndpointResult updateEndpoint(UpdateEndpointRequest request)
AmazonEventBridgeUpdate an existing endpoint. For more information about global endpoints, see Making applications Regional-fault tolerant with global endpoints and event replication in the Amazon EventBridge User Guide.
updateEndpoint in interface AmazonEventBridgepublic void shutdown()
AmazonEventBridgeshutdown in interface AmazonEventBridgepublic ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)
AmazonEventBridgeResponse metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.
getCachedResponseMetadata in interface AmazonEventBridgerequest - The originally executed request.