AWSSecurityHubClient (AWS SDK for Java

java.lang.Object
- com.amazonaws.AmazonWebServiceClient
- - com.amazonaws.services.securityhub.AWSSecurityHubClient

All Implemented Interfaces:

AWSSecurityHub

Direct Known Subclasses:

AWSSecurityHubAsyncClient
```
@ThreadSafe
 @Generated(value="com.amazonaws:aws-java-sdk-code-generator")
public class AWSSecurityHubClient
extends AmazonWebServiceClient
implements AWSSecurityHub
```
Client for accessing AWS SecurityHub. All service calls made using this client are blocking, and will not return until the service call completes.

Security Hub provides you with a comprehensive view of the security state of your Amazon Web Services environment and resources. It also provides you with the readiness status of your environment based on controls from supported security standards. Security Hub collects security data from Amazon Web Services accounts, services, and integrated third-party products and helps you analyze security trends in your environment to identify the highest priority security issues. For more information about Security Hub, see the Security HubUser Guide .

When you use operations in the Security Hub API, the requests are executed only in the Amazon Web Services Region that is currently active or in the specific Amazon Web Services Region that you specify in your request. Any configuration or settings change that results from the operation is applied only to that Region. To make the same change in other Regions, execute the same command for each Region to apply the change to.

For example, if your Region is set to us-west-2, when you use CreateMembers to add a member account to Security Hub, the association of the member account with the administrator account is created only in the us-west-2 Region. Security Hub must be enabled for the member account in the same Region that the invitation was sent from.

The following throttling limits apply to using Security Hub API operations.
- BatchEnableStandards - RateLimit of 1 request per second, BurstLimit of 1 request per second.
- GetFindings - RateLimit of 3 requests per second. BurstLimit of 6 requests per second.
- UpdateFindings - RateLimit of 1 request per second. BurstLimit of 5 requests per second.
- UpdateStandardsControl - RateLimit of 1 request per second, BurstLimit of 5 requests per second.
- All other operations - RateLimit of 10 requests per second. BurstLimit of 30 requests per second.

Field Summary
- Fields inherited from class com.amazonaws.AmazonWebServiceClient
  LOGGING_AWS_REQUEST_METRIC
- Fields inherited from interface com.amazonaws.services.securityhub.AWSSecurityHub
  ENDPOINT_PREFIX

Method Summary

All Methods Static Methods Instance Methods Concrete Methods Deprecated Methods
Modifier and Type	Method and Description
`AcceptAdministratorInvitationResult`	`acceptAdministratorInvitation(AcceptAdministratorInvitationRequest request)` Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
`AcceptInvitationResult`	`acceptInvitation(AcceptInvitationRequest request)` Deprecated.
`BatchDisableStandardsResult`	`batchDisableStandards(BatchDisableStandardsRequest request)` Disables the standards specified by the provided `StandardsSubscriptionArns`.
`BatchEnableStandardsResult`	`batchEnableStandards(BatchEnableStandardsRequest request)` Enables the standards specified by the provided `StandardsArn`.
`BatchImportFindingsResult`	`batchImportFindings(BatchImportFindingsRequest request)` Imports security findings generated from an integrated product into Security Hub.
`BatchUpdateFindingsResult`	`batchUpdateFindings(BatchUpdateFindingsRequest request)` Used by Security Hub customers to update information about their investigation into a finding.
`static AWSSecurityHubClientBuilder`	`builder()`
`CreateActionTargetResult`	`createActionTarget(CreateActionTargetRequest request)` Creates a custom action target in Security Hub.
`CreateInsightResult`	`createInsight(CreateInsightRequest request)` Creates a custom insight in Security Hub.
`CreateMembersResult`	`createMembers(CreateMembersRequest request)` Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account.
`DeclineInvitationsResult`	`declineInvitations(DeclineInvitationsRequest request)` Declines invitations to become a member account.
`DeleteActionTargetResult`	`deleteActionTarget(DeleteActionTargetRequest request)` Deletes a custom action target from Security Hub.
`DeleteInsightResult`	`deleteInsight(DeleteInsightRequest request)` Deletes the insight specified by the `InsightArn`.
`DeleteInvitationsResult`	`deleteInvitations(DeleteInvitationsRequest request)` Deletes invitations received by the Amazon Web Services account to become a member account.
`DeleteMembersResult`	`deleteMembers(DeleteMembersRequest request)` Deletes the specified member accounts from Security Hub.
`DescribeActionTargetsResult`	`describeActionTargets(DescribeActionTargetsRequest request)` Returns a list of the custom action targets in Security Hub in your account.
`DescribeHubResult`	`describeHub(DescribeHubRequest request)` Returns details about the Hub resource in your account, including the `HubArn` and the time when you enabled Security Hub.
`DescribeOrganizationConfigurationResult`	`describeOrganizationConfiguration(DescribeOrganizationConfigurationRequest request)` Returns information about the Organizations configuration for Security Hub.
`DescribeProductsResult`	`describeProducts(DescribeProductsRequest request)` Returns information about product integrations in Security Hub.
`DescribeStandardsResult`	`describeStandards(DescribeStandardsRequest request)` Returns a list of the available standards in Security Hub.
`DescribeStandardsControlsResult`	`describeStandardsControls(DescribeStandardsControlsRequest request)` Returns a list of security standards controls.
`DisableImportFindingsForProductResult`	`disableImportFindingsForProduct(DisableImportFindingsForProductRequest request)` Disables the integration of the specified product with Security Hub.
`DisableOrganizationAdminAccountResult`	`disableOrganizationAdminAccount(DisableOrganizationAdminAccountRequest request)` Disables a Security Hub administrator account.
`DisableSecurityHubResult`	`disableSecurityHub(DisableSecurityHubRequest request)` Disables Security Hub in your account only in the current Region.
`DisassociateFromAdministratorAccountResult`	`disassociateFromAdministratorAccount(DisassociateFromAdministratorAccountRequest request)` Disassociates the current Security Hub member account from the associated administrator account.
`DisassociateFromMasterAccountResult`	`disassociateFromMasterAccount(DisassociateFromMasterAccountRequest request)` Deprecated.
`DisassociateMembersResult`	`disassociateMembers(DisassociateMembersRequest request)` Disassociates the specified member accounts from the associated administrator account.
`EnableImportFindingsForProductResult`	`enableImportFindingsForProduct(EnableImportFindingsForProductRequest request)` Enables the integration of a partner product with Security Hub.
`EnableOrganizationAdminAccountResult`	`enableOrganizationAdminAccount(EnableOrganizationAdminAccountRequest request)` Designates the Security Hub administrator account for an organization.
`EnableSecurityHubResult`	`enableSecurityHub(EnableSecurityHubRequest request)` Enables Security Hub for your account in the current Region or the Region you specify in the request.
`GetAdministratorAccountResult`	`getAdministratorAccount(GetAdministratorAccountRequest request)` Provides the details for the Security Hub administrator account for the current member account.
`ResponseMetadata`	`getCachedResponseMetadata(AmazonWebServiceRequest request)` Returns additional metadata for a previously executed successful, request, typically used for debugging issues where a service isn't acting as expected.
`GetEnabledStandardsResult`	`getEnabledStandards(GetEnabledStandardsRequest request)` Returns a list of the standards that are currently enabled.
`GetFindingsResult`	`getFindings(GetFindingsRequest request)` Returns a list of findings that match the specified criteria.
`GetInsightResultsResult`	`getInsightResults(GetInsightResultsRequest request)` Lists the results of the Security Hub insight specified by the insight ARN.
`GetInsightsResult`	`getInsights(GetInsightsRequest request)` Lists and describes insights for the specified insight ARNs.
`GetInvitationsCountResult`	`getInvitationsCount(GetInvitationsCountRequest request)` Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
`GetMasterAccountResult`	`getMasterAccount(GetMasterAccountRequest request)` Deprecated.
`GetMembersResult`	`getMembers(GetMembersRequest request)` Returns the details for the Security Hub member accounts for the specified account IDs.
`InviteMembersResult`	`inviteMembers(InviteMembersRequest request)` Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.
`ListEnabledProductsForImportResult`	`listEnabledProductsForImport(ListEnabledProductsForImportRequest request)` Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
`ListInvitationsResult`	`listInvitations(ListInvitationsRequest request)` Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
`ListMembersResult`	`listMembers(ListMembersRequest request)` Lists details about all member accounts for the current Security Hub administrator account.
`ListOrganizationAdminAccountsResult`	`listOrganizationAdminAccounts(ListOrganizationAdminAccountsRequest request)` Lists the Security Hub administrator accounts.
`ListTagsForResourceResult`	`listTagsForResource(ListTagsForResourceRequest request)` Returns a list of tags associated with a resource.
`void`	`shutdown()` Shuts down this client object, releasing any resources that might be held open.
`TagResourceResult`	`tagResource(TagResourceRequest request)` Adds one or more tags to a resource.
`UntagResourceResult`	`untagResource(UntagResourceRequest request)` Removes one or more tags from a resource.
`UpdateActionTargetResult`	`updateActionTarget(UpdateActionTargetRequest request)` Updates the name and description of a custom action target in Security Hub.
`UpdateFindingsResult`	`updateFindings(UpdateFindingsRequest request)` `UpdateFindings` is deprecated.
`UpdateInsightResult`	`updateInsight(UpdateInsightRequest request)` Updates the Security Hub insight identified by the specified insight ARN.
`UpdateOrganizationConfigurationResult`	`updateOrganizationConfiguration(UpdateOrganizationConfigurationRequest request)` Used to update the configuration related to Organizations.
`UpdateSecurityHubConfigurationResult`	`updateSecurityHubConfiguration(UpdateSecurityHubConfigurationRequest request)` Updates configuration options for Security Hub.
`UpdateStandardsControlResult`	`updateStandardsControl(UpdateStandardsControlRequest request)` Used to control whether an individual security standard control is enabled or disabled.

Methods inherited from class java.lang.Object
equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Method Detail
  - builder
```
public static AWSSecurityHubClientBuilder builder()
```
  - acceptAdministratorInvitation
```
public AcceptAdministratorInvitationResult acceptAdministratorInvitation(AcceptAdministratorInvitationRequest request)
```
    Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
    
    This operation is only used by member accounts that are not added through Organizations.
    
    When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.
    
    Specified by:
    
    acceptAdministratorInvitation in interface AWSSecurityHub
    
    Parameters:
    
    acceptAdministratorInvitationRequest -
    
    Returns:
    
    Result of the AcceptAdministratorInvitation operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - acceptInvitation
```
@Deprecated
public AcceptInvitationResult acceptInvitation(AcceptInvitationRequest request)
```
    Deprecated.
    
    This method is deprecated. Instead, use AcceptAdministratorInvitation.
    
    The Security Hub console continues to use AcceptInvitation. It will eventually change to use AcceptAdministratorInvitation. Any IAM policies that specifically control access to this function must continue to use AcceptInvitation. You should also add AcceptAdministratorInvitation to your policies to ensure that the correct permissions are in place after the console begins to use AcceptAdministratorInvitation.
    
    Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
    
    This operation is only used by member accounts that are not added through Organizations.
    
    When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.
    
    Specified by:
    
    acceptInvitation in interface AWSSecurityHub
    
    Parameters:
    
    acceptInvitationRequest -
    
    Returns:
    
    Result of the AcceptInvitation operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - batchDisableStandards
```
public BatchDisableStandardsResult batchDisableStandards(BatchDisableStandardsRequest request)
```
    Disables the standards specified by the provided StandardsSubscriptionArns.
    
    For more information, see Security Standards section of the Security Hub User Guide.
    
    Specified by:
    
    batchDisableStandards in interface AWSSecurityHub
    
    Parameters:
    
    batchDisableStandardsRequest -
    
    Returns:
    
    Result of the BatchDisableStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - batchEnableStandards
```
public BatchEnableStandardsResult batchEnableStandards(BatchEnableStandardsRequest request)
```
    Enables the standards specified by the provided StandardsArn. To obtain the ARN for a standard, use the DescribeStandards operation.
    
    For more information, see the Security Standards section of the Security Hub User Guide.
    
    Specified by:
    
    batchEnableStandards in interface AWSSecurityHub
    
    Parameters:
    
    batchEnableStandardsRequest -
    
    Returns:
    
    Result of the BatchEnableStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - batchImportFindings
```
public BatchImportFindingsResult batchImportFindings(BatchImportFindingsRequest request)
```
    Imports security findings generated from an integrated product into Security Hub. This action is requested by the integrated product to import its findings into Security Hub.
    
    The maximum allowed size for a finding is 240 Kb. An error is returned for any finding larger than 240 Kb.
    
    After a finding is created, BatchImportFindings cannot be used to update the following finding fields and objects, which Security Hub customers use to manage their investigation workflow.
    - Note
    - UserDefinedFields
    - VerificationState
    - Workflow
    Finding providers also should not use BatchImportFindings to update the following attributes.
    - Confidence
    - Criticality
    - RelatedFindings
    - Severity
    - Types
    Instead, finding providers use FindingProviderFields to provide values for these attributes.
    Specified by:
    
    batchImportFindings in interface AWSSecurityHub
    
    Parameters:
    
    batchImportFindingsRequest -
    
    Returns:
    
    Result of the BatchImportFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - batchUpdateFindings
```
public BatchUpdateFindingsResult batchUpdateFindings(BatchUpdateFindingsRequest request)
```
    Used by Security Hub customers to update information about their investigation into a finding. Requested by administrator accounts or member accounts. Administrator accounts can update findings for their account and their member accounts. Member accounts can update findings for their account.
    
    Updates from BatchUpdateFindings do not affect the value of UpdatedAt for a finding.
    
    Administrator and member accounts can use BatchUpdateFindings to update the following finding fields and objects.
    - Confidence
    - Criticality
    - Note
    - RelatedFindings
    - Severity
    - Types
    - UserDefinedFields
    - VerificationState
    - Workflow
    You can configure IAM policies to restrict access to fields and field values. For example, you might not want member accounts to be able to suppress findings or change the finding severity. See Configuring access to BatchUpdateFindings in the Security Hub User Guide.
    Specified by:
    
    batchUpdateFindings in interface AWSSecurityHub
    
    Parameters:
    
    batchUpdateFindingsRequest -
    
    Returns:
    
    Result of the BatchUpdateFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - createActionTarget
```
public CreateActionTargetResult createActionTarget(CreateActionTargetRequest request)
```
    Creates a custom action target in Security Hub.
    
    You can use custom actions on findings and insights in Security Hub to trigger target actions in Amazon CloudWatch Events.
    
    Specified by:
    
    createActionTarget in interface AWSSecurityHub
    
    Parameters:
    
    createActionTargetRequest -
    
    Returns:
    
    Result of the CreateActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    See Also:
    
    AWS API Documentation
  - createInsight
```
public CreateInsightResult createInsight(CreateInsightRequest request)
```
    Creates a custom insight in Security Hub. An insight is a consolidation of findings that relate to a security issue that requires attention or remediation.
    
    To group the related findings in the insight, use the GroupByAttribute.
    
    Specified by:
    
    createInsight in interface AWSSecurityHub
    
    Parameters:
    
    createInsightRequest -
    
    Returns:
    
    Result of the CreateInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    See Also:
    
    AWS API Documentation
  - createMembers
```
public CreateMembersResult createMembers(CreateMembersRequest request)
```
    Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account. If you are integrated with Organizations, then the administrator account is designated by the organization management account.
    
    CreateMembers is always used to add accounts that are not organization members.
    
    For accounts that are managed using Organizations, CreateMembers is only used in the following cases:
    - Security Hub is not configured to automatically add new organization accounts.
    - The account was disassociated or deleted in Security Hub.
    This action can only be used by an account that has Security Hub enabled. To enable Security Hub, you can use the EnableSecurityHub operation.
    
    For accounts that are not organization members, you create the account association and then send an invitation to the member account. To send the invitation, you use the InviteMembers operation. If the account owner accepts the invitation, the account becomes a member account in Security Hub.
    
    Accounts that are managed using Organizations do not receive an invitation. They automatically become a member account in Security Hub, and Security Hub is automatically enabled for those accounts. Note that Security Hub cannot be enabled automatically for the organization management account. The organization management account must enable Security Hub before the administrator account enables it as a member account.
    
    A permissions policy is added that permits the administrator account to view the findings generated in the member account. When Security Hub is enabled in a member account, the member account findings are also visible to the administrator account.
    
    To remove the association between the administrator and member accounts, use the DisassociateFromMasterAccount or DisassociateMembers operation.
    Specified by:
    
    createMembers in interface AWSSecurityHub
    
    Parameters:
    
    createMembersRequest -
    
    Returns:
    
    Result of the CreateMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    See Also:
    
    AWS API Documentation
  - declineInvitations
```
public DeclineInvitationsResult declineInvitations(DeclineInvitationsRequest request)
```
    Declines invitations to become a member account.
    
    This operation is only used by accounts that are not part of an organization. Organization accounts do not receive invitations.
    
    Specified by:
    
    declineInvitations in interface AWSSecurityHub
    
    Parameters:
    
    declineInvitationsRequest -
    
    Returns:
    
    Result of the DeclineInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - deleteActionTarget
```
public DeleteActionTargetResult deleteActionTarget(DeleteActionTargetRequest request)
```
    Deletes a custom action target from Security Hub.
    
    Deleting a custom action target does not affect any findings or insights that were already sent to Amazon CloudWatch Events using the custom action.
    
    Specified by:
    
    deleteActionTarget in interface AWSSecurityHub
    
    Parameters:
    
    deleteActionTargetRequest -
    
    Returns:
    
    Result of the DeleteActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - deleteInsight
```
public DeleteInsightResult deleteInsight(DeleteInsightRequest request)
```
    Deletes the insight specified by the InsightArn.
    
    Specified by:
    
    deleteInsight in interface AWSSecurityHub
    
    Parameters:
    
    deleteInsightRequest -
    
    Returns:
    
    Result of the DeleteInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - deleteInvitations
```
public DeleteInvitationsResult deleteInvitations(DeleteInvitationsRequest request)
```
    Deletes invitations received by the Amazon Web Services account to become a member account.
    
    This operation is only used by accounts that are not part of an organization. Organization accounts do not receive invitations.
    
    Specified by:
    
    deleteInvitations in interface AWSSecurityHub
    
    Parameters:
    
    deleteInvitationsRequest -
    
    Returns:
    
    Result of the DeleteInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - deleteMembers
```
public DeleteMembersResult deleteMembers(DeleteMembersRequest request)
```
    Deletes the specified member accounts from Security Hub.
    
    Can be used to delete member accounts that belong to an organization as well as member accounts that were invited manually.
    
    Specified by:
    
    deleteMembers in interface AWSSecurityHub
    
    Parameters:
    
    deleteMembersRequest -
    
    Returns:
    
    Result of the DeleteMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - describeActionTargets
```
public DescribeActionTargetsResult describeActionTargets(DescribeActionTargetsRequest request)
```
    Returns a list of the custom action targets in Security Hub in your account.
    
    Specified by:
    
    describeActionTargets in interface AWSSecurityHub
    
    Parameters:
    
    describeActionTargetsRequest -
    
    Returns:
    
    Result of the DescribeActionTargets operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - describeHub
```
public DescribeHubResult describeHub(DescribeHubRequest request)
```
    Returns details about the Hub resource in your account, including the HubArn and the time when you enabled Security Hub.
    
    Specified by:
    
    describeHub in interface AWSSecurityHub
    
    Parameters:
    
    describeHubRequest -
    
    Returns:
    
    Result of the DescribeHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - describeOrganizationConfiguration
```
public DescribeOrganizationConfigurationResult describeOrganizationConfiguration(DescribeOrganizationConfigurationRequest request)
```
    Returns information about the Organizations configuration for Security Hub. Can only be called from a Security Hub administrator account.
    
    Specified by:
    
    describeOrganizationConfiguration in interface AWSSecurityHub
    
    Parameters:
    
    describeOrganizationConfigurationRequest -
    
    Returns:
    
    Result of the DescribeOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - describeProducts
```
public DescribeProductsResult describeProducts(DescribeProductsRequest request)
```
    Returns information about product integrations in Security Hub.
    
    You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.
    
    If you do not provide an integration ARN, then the results include all of the available product integrations.
    
    Specified by:
    
    describeProducts in interface AWSSecurityHub
    
    Parameters:
    
    describeProductsRequest -
    
    Returns:
    
    Result of the DescribeProducts operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    See Also:
    
    AWS API Documentation
  - describeStandards
```
public DescribeStandardsResult describeStandards(DescribeStandardsRequest request)
```
    Returns a list of the available standards in Security Hub.
    
    For each standard, the results include the standard ARN, the name, and a description.
    
    Specified by:
    
    describeStandards in interface AWSSecurityHub
    
    Parameters:
    
    describeStandardsRequest -
    
    Returns:
    
    Result of the DescribeStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - describeStandardsControls
```
public DescribeStandardsControlsResult describeStandardsControls(DescribeStandardsControlsRequest request)
```
    Returns a list of security standards controls.
    
    For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.
    
    Specified by:
    
    describeStandardsControls in interface AWSSecurityHub
    
    Parameters:
    
    describeStandardsControlsRequest -
    
    Returns:
    
    Result of the DescribeStandardsControls operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - disableImportFindingsForProduct
```
public DisableImportFindingsForProductResult disableImportFindingsForProduct(DisableImportFindingsForProductRequest request)
```
    Disables the integration of the specified product with Security Hub. After the integration is disabled, findings from that product are no longer sent to Security Hub.
    
    Specified by:
    
    disableImportFindingsForProduct in interface AWSSecurityHub
    
    Parameters:
    
    disableImportFindingsForProductRequest -
    
    Returns:
    
    Result of the DisableImportFindingsForProduct operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - disableOrganizationAdminAccount
```
public DisableOrganizationAdminAccountResult disableOrganizationAdminAccount(DisableOrganizationAdminAccountRequest request)
```
    Disables a Security Hub administrator account. Can only be called by the organization management account.
    
    Specified by:
    
    disableOrganizationAdminAccount in interface AWSSecurityHub
    
    Parameters:
    
    disableOrganizationAdminAccountRequest -
    
    Returns:
    
    Result of the DisableOrganizationAdminAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - disableSecurityHub
```
public DisableSecurityHubResult disableSecurityHub(DisableSecurityHubRequest request)
```
    Disables Security Hub in your account only in the current Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub.
    
    When you disable Security Hub for an administrator account, it doesn't disable Security Hub for any associated member accounts.
    
    When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed.
    
    If you want to save your existing findings, you must export them before you disable Security Hub.
    
    Specified by:
    
    disableSecurityHub in interface AWSSecurityHub
    
    Parameters:
    
    disableSecurityHubRequest -
    
    Returns:
    
    Result of the DisableSecurityHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - disassociateFromAdministratorAccount
```
public DisassociateFromAdministratorAccountResult disassociateFromAdministratorAccount(DisassociateFromAdministratorAccountRequest request)
```
    Disassociates the current Security Hub member account from the associated administrator account.
    
    This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.
    
    Specified by:
    
    disassociateFromAdministratorAccount in interface AWSSecurityHub
    
    Parameters:
    
    disassociateFromAdministratorAccountRequest -
    
    Returns:
    
    Result of the DisassociateFromAdministratorAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - disassociateFromMasterAccount
```
@Deprecated
public DisassociateFromMasterAccountResult disassociateFromMasterAccount(DisassociateFromMasterAccountRequest request)
```
    Deprecated.
    
    This method is deprecated. Instead, use DisassociateFromAdministratorAccount.
    
    The Security Hub console continues to use DisassociateFromMasterAccount. It will eventually change to use DisassociateFromAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use DisassociateFromMasterAccount. You should also add DisassociateFromAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use DisassociateFromAdministratorAccount.
    
    Disassociates the current Security Hub member account from the associated administrator account.
    
    This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.
    
    Specified by:
    
    disassociateFromMasterAccount in interface AWSSecurityHub
    
    Parameters:
    
    disassociateFromMasterAccountRequest -
    
    Returns:
    
    Result of the DisassociateFromMasterAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - disassociateMembers
```
public DisassociateMembersResult disassociateMembers(DisassociateMembersRequest request)
```
    Disassociates the specified member accounts from the associated administrator account.
    
    Can be used to disassociate both accounts that are managed using Organizations and accounts that were invited manually.
    
    Specified by:
    
    disassociateMembers in interface AWSSecurityHub
    
    Parameters:
    
    disassociateMembersRequest -
    
    Returns:
    
    Result of the DisassociateMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - enableImportFindingsForProduct
```
public EnableImportFindingsForProductResult enableImportFindingsForProduct(EnableImportFindingsForProductRequest request)
```
    Enables the integration of a partner product with Security Hub. Integrated products send findings to Security Hub.
    
    When you enable a product integration, a permissions policy that grants permission for the product to send findings to Security Hub is applied.
    
    Specified by:
    
    enableImportFindingsForProduct in interface AWSSecurityHub
    
    Parameters:
    
    enableImportFindingsForProductRequest -
    
    Returns:
    
    Result of the EnableImportFindingsForProduct operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - enableOrganizationAdminAccount
```
public EnableOrganizationAdminAccountResult enableOrganizationAdminAccount(EnableOrganizationAdminAccountRequest request)
```
    Designates the Security Hub administrator account for an organization. Can only be called by the organization management account.
    
    Specified by:
    
    enableOrganizationAdminAccount in interface AWSSecurityHub
    
    Parameters:
    
    enableOrganizationAdminAccountRequest -
    
    Returns:
    
    Result of the EnableOrganizationAdminAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - enableSecurityHub
```
public EnableSecurityHubResult enableSecurityHub(EnableSecurityHubRequest request)
```
    Enables Security Hub for your account in the current Region or the Region you specify in the request.
    
    When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub.
    
    When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards.
    - CIS Amazon Web Services Foundations
    - Amazon Web Services Foundational Security Best Practices
    You do not enable the Payment Card Industry Data Security Standard (PCI DSS) standard.
    
    To not enable the automatically enabled standards, set EnableDefaultStandards to false.
    
    After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation.
    
    To learn more, see the setup information in the Security Hub User Guide.
    Specified by:
    
    enableSecurityHub in interface AWSSecurityHub
    
    Parameters:
    
    enableSecurityHubRequest -
    
    Returns:
    
    Result of the EnableSecurityHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    See Also:
    
    AWS API Documentation
  - getAdministratorAccount
```
public GetAdministratorAccountResult getAdministratorAccount(GetAdministratorAccountRequest request)
```
    Provides the details for the Security Hub administrator account for the current member account.
    
    Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
    
    Specified by:
    
    getAdministratorAccount in interface AWSSecurityHub
    
    Parameters:
    
    getAdministratorAccountRequest -
    
    Returns:
    
    Result of the GetAdministratorAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - getEnabledStandards
```
public GetEnabledStandardsResult getEnabledStandards(GetEnabledStandardsRequest request)
```
    Returns a list of the standards that are currently enabled.
    
    Specified by:
    
    getEnabledStandards in interface AWSSecurityHub
    
    Parameters:
    
    getEnabledStandardsRequest -
    
    Returns:
    
    Result of the GetEnabledStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - getFindings
```
public GetFindingsResult getFindings(GetFindingsRequest request)
```
    Returns a list of findings that match the specified criteria.
    
    Specified by:
    
    getFindings in interface AWSSecurityHub
    
    Parameters:
    
    getFindingsRequest -
    
    Returns:
    
    Result of the GetFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - getInsightResults
```
public GetInsightResultsResult getInsightResults(GetInsightResultsRequest request)
```
    Lists the results of the Security Hub insight specified by the insight ARN.
    
    Specified by:
    
    getInsightResults in interface AWSSecurityHub
    
    Parameters:
    
    getInsightResultsRequest -
    
    Returns:
    
    Result of the GetInsightResults operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - getInsights
```
public GetInsightsResult getInsights(GetInsightsRequest request)
```
    Lists and describes insights for the specified insight ARNs.
    
    Specified by:
    
    getInsights in interface AWSSecurityHub
    
    Parameters:
    
    getInsightsRequest -
    
    Returns:
    
    Result of the GetInsights operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - getInvitationsCount
```
public GetInvitationsCountResult getInvitationsCount(GetInvitationsCountRequest request)
```
    Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
    
    Specified by:
    
    getInvitationsCount in interface AWSSecurityHub
    
    Parameters:
    
    getInvitationsCountRequest -
    
    Returns:
    
    Result of the GetInvitationsCount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - getMasterAccount
```
@Deprecated
public GetMasterAccountResult getMasterAccount(GetMasterAccountRequest request)
```
    Deprecated.
    
    This method is deprecated. Instead, use GetAdministratorAccount.
    
    The Security Hub console continues to use GetMasterAccount. It will eventually change to use GetAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use GetMasterAccount. You should also add GetAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use GetAdministratorAccount.
    
    Provides the details for the Security Hub administrator account for the current member account.
    
    Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
    
    Specified by:
    
    getMasterAccount in interface AWSSecurityHub
    
    Parameters:
    
    getMasterAccountRequest -
    
    Returns:
    
    Result of the GetMasterAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - getMembers
```
public GetMembersResult getMembers(GetMembersRequest request)
```
    Returns the details for the Security Hub member accounts for the specified account IDs.
    
    An administrator account can be either the delegated Security Hub administrator account for an organization or an administrator account that enabled Security Hub manually.
    
    The results include both member accounts that are managed using Organizations and accounts that were invited manually.
    
    Specified by:
    
    getMembers in interface AWSSecurityHub
    
    Parameters:
    
    getMembersRequest -
    
    Returns:
    
    Result of the GetMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - inviteMembers
```
public InviteMembersResult inviteMembers(InviteMembersRequest request)
```
    Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.
    
    This operation is only used to invite accounts that do not belong to an organization. Organization accounts do not receive invitations.
    
    Before you can use this action to invite a member, you must first use the CreateMembers action to create the member account in Security Hub.
    
    When the account owner enables Security Hub and accepts the invitation to become a member account, the administrator account can view the findings generated from the member account.
    
    Specified by:
    
    inviteMembers in interface AWSSecurityHub
    
    Parameters:
    
    inviteMembersRequest -
    
    Returns:
    
    Result of the InviteMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - listEnabledProductsForImport
```
public ListEnabledProductsForImportResult listEnabledProductsForImport(ListEnabledProductsForImportRequest request)
```
    Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
    
    Specified by:
    
    listEnabledProductsForImport in interface AWSSecurityHub
    
    Parameters:
    
    listEnabledProductsForImportRequest -
    
    Returns:
    
    Result of the ListEnabledProductsForImport operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    See Also:
    
    AWS API Documentation
  - listInvitations
```
public ListInvitationsResult listInvitations(ListInvitationsRequest request)
```
    Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
    
    This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.
    
    Specified by:
    
    listInvitations in interface AWSSecurityHub
    
    Parameters:
    
    listInvitationsRequest -
    
    Returns:
    
    Result of the ListInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - listMembers
```
public ListMembersResult listMembers(ListMembersRequest request)
```
    Lists details about all member accounts for the current Security Hub administrator account.
    
    The results include both member accounts that belong to an organization and member accounts that were invited manually.
    
    Specified by:
    
    listMembers in interface AWSSecurityHub
    
    Parameters:
    
    listMembersRequest -
    
    Returns:
    
    Result of the ListMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - listOrganizationAdminAccounts
```
public ListOrganizationAdminAccountsResult listOrganizationAdminAccounts(ListOrganizationAdminAccountsRequest request)
```
    Lists the Security Hub administrator accounts. Can only be called by the organization management account.
    
    Specified by:
    
    listOrganizationAdminAccounts in interface AWSSecurityHub
    
    Parameters:
    
    listOrganizationAdminAccountsRequest -
    
    Returns:
    
    Result of the ListOrganizationAdminAccounts operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
public ListTagsForResourceResult listTagsForResource(ListTagsForResourceRequest request)
```
    Returns a list of tags associated with a resource.
    
    Specified by:
    
    listTagsForResource in interface AWSSecurityHub
    
    Parameters:
    
    listTagsForResourceRequest -
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
public TagResourceResult tagResource(TagResourceRequest request)
```
    Adds one or more tags to a resource.
    
    Specified by:
    
    tagResource in interface AWSSecurityHub
    
    Parameters:
    
    tagResourceRequest -
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
public UntagResourceResult untagResource(UntagResourceRequest request)
```
    Removes one or more tags from a resource.
    
    Specified by:
    
    untagResource in interface AWSSecurityHub
    
    Parameters:
    
    untagResourceRequest -
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateActionTarget
```
public UpdateActionTargetResult updateActionTarget(UpdateActionTargetRequest request)
```
    Updates the name and description of a custom action target in Security Hub.
    
    Specified by:
    
    updateActionTarget in interface AWSSecurityHub
    
    Parameters:
    
    updateActionTargetRequest -
    
    Returns:
    
    Result of the UpdateActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateFindings
```
public UpdateFindingsResult updateFindings(UpdateFindingsRequest request)
```
    UpdateFindings is deprecated. Instead of UpdateFindings, use BatchUpdateFindings.
    
    Updates the Note and RecordState of the Security Hub-aggregated findings that the filter attributes specify. Any member account that can view the finding also sees the update to the finding.
    
    Specified by:
    
    updateFindings in interface AWSSecurityHub
    
    Parameters:
    
    updateFindingsRequest -
    
    Returns:
    
    Result of the UpdateFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateInsight
```
public UpdateInsightResult updateInsight(UpdateInsightRequest request)
```
    Updates the Security Hub insight identified by the specified insight ARN.
    
    Specified by:
    
    updateInsight in interface AWSSecurityHub
    
    Parameters:
    
    updateInsightRequest -
    
    Returns:
    
    Result of the UpdateInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateOrganizationConfiguration
```
public UpdateOrganizationConfigurationResult updateOrganizationConfiguration(UpdateOrganizationConfigurationRequest request)
```
    Used to update the configuration related to Organizations. Can only be called from a Security Hub administrator account.
    
    Specified by:
    
    updateOrganizationConfiguration in interface AWSSecurityHub
    
    Parameters:
    
    updateOrganizationConfigurationRequest -
    
    Returns:
    
    Result of the UpdateOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    See Also:
    
    AWS API Documentation
  - updateSecurityHubConfiguration
```
public UpdateSecurityHubConfigurationResult updateSecurityHubConfiguration(UpdateSecurityHubConfigurationRequest request)
```
    Updates configuration options for Security Hub.
    
    Specified by:
    
    updateSecurityHubConfiguration in interface AWSSecurityHub
    
    Parameters:
    
    updateSecurityHubConfigurationRequest -
    
    Returns:
    
    Result of the UpdateSecurityHubConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - updateStandardsControl
```
public UpdateStandardsControlResult updateStandardsControl(UpdateStandardsControlRequest request)
```
    Used to control whether an individual security standard control is enabled or disabled.
    
    Specified by:
    
    updateStandardsControl in interface AWSSecurityHub
    
    Parameters:
    
    updateStandardsControlRequest -
    
    Returns:
    
    Result of the UpdateStandardsControl operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - There is an issue with the account used to make the request. Either Security Hub is not enabled for the account, or the account does not have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    See Also:
    
    AWS API Documentation
  - getCachedResponseMetadata
```
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)
```
    Returns additional metadata for a previously executed successful, request, typically used for debugging issues where a service isn't acting as expected. This data isn't considered part of the result data returned by an operation, so it's available through this separate, diagnostic interface.
    Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing the request.
    
    Specified by:
    
    getCachedResponseMetadata in interface AWSSecurityHub
    
    Parameters:
    
    request - The originally executed request
    
    Returns:
    
    The response metadata for the specified request, or null if none is available.
  - shutdown
```
public void shutdown()
```
    Description copied from class: AmazonWebServiceClient
    
    Shuts down this client object, releasing any resources that might be held open. If this method is not invoked, resources may be leaked. Once a client has been shutdown, it should not be used to make any more requests.
    
    Specified by:
    
    shutdown in interface AWSSecurityHub
    
    Overrides:
    
    shutdown in class AmazonWebServiceClient

Did this page help you?

Class AWSSecurityHubClient

Field Summary

Fields inherited from class com.amazonaws.AmazonWebServiceClient

Fields inherited from interface com.amazonaws.services.securityhub.AWSSecurityHub

Method Summary

Methods inherited from class com.amazonaws.AmazonWebServiceClient

Methods inherited from class java.lang.Object

Method Detail

builder

acceptAdministratorInvitation

acceptInvitation

batchDisableStandards

batchEnableStandards

batchImportFindings

batchUpdateFindings

createActionTarget

createInsight

createMembers

declineInvitations

deleteActionTarget

deleteInsight

deleteInvitations

deleteMembers

describeActionTargets

describeHub

describeOrganizationConfiguration

describeProducts

describeStandards

describeStandardsControls

disableImportFindingsForProduct

disableOrganizationAdminAccount

disableSecurityHub

disassociateFromAdministratorAccount

disassociateFromMasterAccount

disassociateMembers

enableImportFindingsForProduct

enableOrganizationAdminAccount

enableSecurityHub

getAdministratorAccount

getEnabledStandards

getFindings

getInsightResults

getInsights

getInvitationsCount

getMasterAccount

getMembers

inviteMembers

listEnabledProductsForImport

listInvitations

listMembers

listOrganizationAdminAccounts

listTagsForResource

tagResource

untagResource

updateActionTarget

updateFindings

updateInsight

updateOrganizationConfiguration

updateSecurityHubConfiguration

updateStandardsControl

getCachedResponseMetadata

shutdown