String secretId
Specifies the secret for which you want to cancel a rotation request. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
String aRN
The ARN of the secret for which rotation was canceled.
String name
The friendly name of the secret for which rotation was canceled.
String versionId
The unique identifier of the version of the secret that was created during the rotation. This version might not
be complete, and should be evaluated for possible deletion. At the very least, you should remove the
VersionStage value AWSPENDING to enable this version to be deleted. Failing to clean up
a cancelled rotation can block you from successfully starting future rotations.
String name
Specifies the friendly name of the new secret.
The secret name must be ASCII letters, digits, or the following characters : /_+=,.@-
String clientRequestToken
(Optional) If you include SecretString or SecretBinary, then an initial version is
created as part of the secret, and this parameter specifies a unique identifier for the new version.
If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The
CLI or SDK generates a random UUID for you and includes it as the value for this parameter in the request. If you
don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must
generate a ClientRequestToken yourself for the new version and include that value in the request.
This value helps ensure idempotency. Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during a rotation. We recommend that you generate a UUID-type value to ensure uniqueness of your versions within the specified secret.
If the ClientRequestToken value isn't already associated with a version of the secret then a new
version of the secret is created.
If a version with this value already exists and that version's SecretString and
SecretBinary values are the same as those in the request, then the request is ignored (the operation
is idempotent).
If a version with this value already exists and that version's SecretString and
SecretBinary values are different from those in the request then the request fails because you
cannot modify an existing version. Instead, use PutSecretValue to create a new version.
This value becomes the SecretVersionId of the new version.
String description
(Optional) Specifies a user-provided description of the secret.
String kmsKeyId
(Optional) Specifies the ARN, Key ID, or alias of the AWS KMS customer master key (CMK) to be used to encrypt the
SecretString or SecretBinary values in the versions stored in this secret.
You can specify any of the supported ways to identify a AWS KMS key ID. If you need to reference a CMK in a different account, you can use only the key ARN or the alias ARN.
If you don't specify this value, then Secrets Manager defaults to using the AWS account's default CMK (the one
named aws/secretsmanager). If a AWS KMS CMK with that name doesn't yet exist, then Secrets Manager
creates it for you automatically the first time it needs to encrypt a version's SecretString or
SecretBinary fields.
You can use the account's default CMK to encrypt and decrypt only if you call this operation using credentials from the same account that owns the secret. If the secret is in a different account, then you must create a custom CMK and specify the ARN in this field.
ByteBuffer secretBinary
(Optional) Specifies binary data that you want to encrypt and store in the new version of the secret. To use this parameter in the command-line tools, we recommend that you store your binary data in a file and then use the appropriate technique for your tool to pass the contents of the file as a parameter.
Either SecretString or SecretBinary must have a value, but not both. They cannot both
be empty.
This parameter is not available using the Secrets Manager console. It can be accessed only by using the AWS CLI or one of the AWS SDKs.
String secretString
(Optional) Specifies text data that you want to encrypt and store in this new version of the secret.
Either SecretString or SecretBinary must have a value, but not both. They cannot both
be empty.
If you create a secret by using the Secrets Manager console then Secrets Manager puts the protected secret text
in only the SecretString parameter. The Secrets Manager console stores the information as a JSON
structure of key/value pairs that the Lambda rotation function knows how to parse.
For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide. For example:
[{"username":"bob"},{"password":"abc123xyz456"}]
If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.
List<E> tags
(Optional) Specifies a list of user-defined tags that are attached to the secret. Each tag is a "Key" and "Value" pair of strings. This operation only appends tags to the existing list of tags. To remove tags, you must use UntagResource.
Secrets Manager tag key names are case sensitive. A tag with the key "ABC" is a different tag from one with key "abc".
If you check tags in IAM policy Condition elements as part of your security strategy, then adding or
removing a tag can change permissions. If the successful completion of this operation would result in you losing
your permissions for this secret, then this operation is blocked and returns an Access Denied error.
This parameter requires a JSON text string argument. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide. For example:
[{"Key":"CostCenter","Value":"12345"},{"Key":"environment","Value":"production"}]
If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.
The following basic restrictions apply to tags:
Maximum number of tags per secret—50
Maximum key length—127 Unicode characters in UTF-8
Maximum value length—255 Unicode characters in UTF-8
Tag keys and values are case sensitive.
Do not use the aws: prefix in your tag names or values because it is reserved for AWS use. You can't
edit or delete tag names or values with this prefix. Tags with this prefix do not count against your tags per
secret limit.
If your tagging schema will be used across multiple services and resources, remember that other services might have restrictions on allowed characters. Generally allowed characters are: letters, spaces, and numbers representable in UTF-8, plus the following special characters: + - = . _ : / @.
String aRN
The Amazon Resource Name (ARN) of the secret that you just created.
Secrets Manager automatically adds several random characters to the name at the end of the ARN when you initially create a secret. This affects only the ARN and not the actual friendly name. This ensures that if you create a new secret with the same name as an old secret that you previously deleted, then users with access to the old secret don't automatically get access to the new secret because the ARNs are different.
String name
The friendly name of the secret that you just created.
String versionId
The unique identifier that's associated with the version of the secret you just created.
String secretId
Specifies the secret for which you want to delete the attached resource-based policy. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
String secretId
Specifies the secret that you want to delete. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Long recoveryWindowInDays
(Optional) Specifies the number of days that Secrets Manager waits before it can delete the secret.
This value can range from 7 to 30 days. The default value is 30.
String aRN
The ARN of the secret that is now scheduled for deletion.
String name
The friendly name of the secret that is now scheduled for deletion.
Date deletionDate
The date and time after which this secret can be deleted by Secrets Manager and can no longer be restored. This
value is the date and time of the delete request plus the number of days specified in
RecoveryWindowInDays.
String secretId
The identifier of the secret whose details you want to retrieve. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
String aRN
The ARN of the secret.
String name
The user-provided friendly name of the secret.
String description
The user-provided description of the secret.
String kmsKeyId
The ARN or alias of the AWS KMS customer master key (CMK) that's used to encrypt the SecretString or
SecretBinary fields in each version of the secret. If you don't provide a key, then Secrets Manager
defaults to encrypting the secret fields with the default AWS KMS CMK (the one named
awssecretsmanager) for this account.
Boolean rotationEnabled
Specifies whether automatic rotation is enabled for this secret.
To enable rotation, use RotateSecret with AutomaticallyRotateAfterDays set to a value greater
than 0. To disable rotation, use CancelRotateSecret.
String rotationLambdaARN
The ARN of a Lambda function that's invoked by Secrets Manager to rotate the secret either automatically per the
schedule or manually by a call to RotateSecret.
RotationRulesType rotationRules
A structure that contains the rotation configuration for this secret.
Date lastRotatedDate
The last date and time that the Secrets Manager rotation process for this secret was invoked.
Date lastChangedDate
The last date and time that this secret was modified in any way.
Date lastAccessedDate
The last date that this secret was accessed. This value is truncated to midnight of the date and therefore shows only the date, not the time.
Date deletedDate
This value exists if the secret is scheduled for deletion. Some time after the specified date and time, Secrets Manager deletes the secret and all of its versions.
If a secret is scheduled for deletion, then its details, including the encrypted secret information, is not accessible. To cancel a scheduled deletion and restore access, use RestoreSecret.
List<E> tags
The list of user-defined tags that are associated with the secret. To add tags to a secret, use TagResource. To remove tags, use UntagResource.
Map<K,V> versionIdsToStages
A list of all of the currently assigned VersionStage staging labels and the
SecretVersionId that each is attached to. Staging labels are used to keep track of the different
versions during the rotation process.
A version that does not have any staging labels attached is considered deprecated and subject to deletion. Such versions are not included in this list.
Long passwordLength
The desired length of the generated password. The default value if you do not include this parameter is 32 characters.
String excludeCharacters
A string that includes characters that should not be included in the generated password. The default is that all characters from the included sets can be used.
Boolean excludeNumbers
Specifies that the generated password should not include digits. The default if you do not include this switch parameter is that digits can be included.
Boolean excludePunctuation
Specifies that the generated password should not include punctuation characters. The default if you do not include this switch parameter is that punctuation characters can be included.
Boolean excludeUppercase
Specifies that the generated password should not include uppercase letters. The default if you do not include this switch parameter is that uppercase letters can be included.
Boolean excludeLowercase
Specifies that the generated password should not include lowercase letters. The default if you do not include this switch parameter is that lowercase letters can be included.
Boolean includeSpace
Specifies that the generated password can include the space character. The default if you do not include this switch parameter is that the space character is not included.
Boolean requireEachIncludedType
A boolean value that specifies whether the generated password must include at least one of every allowed
character type. The default value is True and the operation requires at least one of every character
type.
String randomPassword
A string with the generated password.
String secretId
Specifies the secret for which you want to retrieve the attached resource-based policy. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
String aRN
The ARN of the secret for which the resource-based policy was retrieved.
String name
The friendly name of the secret for which the resource-based policy was retrieved.
String resourcePolicy
A JSON-formatted string that describes the permissions associated with the attached secret. These permissions are combined with any permissions associated with the user or role who attempts to access this secret. The combined permissions specify who can access the secret and what actions they can perform. For more information, see Authentication and Access Control for AWS Secrets Manager in the AWS Secrets Manager User Guide.
String secretId
Specifies the secret containing the version that you want to retrieve. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
String versionId
Specifies the unique identifier of the version of the secret that you want to retrieve. If you specify this
parameter then don't specify VersionStage. If you don't specify either a VersionStage
or SecretVersionId then the default is to perform the operation on the version with the
VersionStage value of AWSCURRENT.
This value is typically a UUID-type value with 32 hexadecimal digits.
String versionStage
Specifies the secret version that you want to retrieve by the staging label attached to the version.
Staging labels are used to keep track of different versions during the rotation process. If you use this
parameter then don't specify SecretVersionId. If you don't specify either a
VersionStage or SecretVersionId, then the default is to perform the operation on the
version with the VersionStage value of AWSCURRENT.
String aRN
The ARN of the secret.
String name
The friendly name of the secret.
String versionId
The unique identifier of this version of the secret.
ByteBuffer secretBinary
The decrypted part of the protected secret information that was originally provided as binary data in the form of a byte array. The response parameter represents the binary data as a base64-encoded string.
This parameter is not used if the secret is created by the Secrets Manager console.
If you store custom information in this field of the secret, then you must code your Lambda rotation function to
parse and interpret whatever you store in the SecretString or SecretBinary fields.
String secretString
The decrypted part of the protected secret information that was originally provided as a string.
If you create this secret by using the Secrets Manager console then only the SecretString parameter
contains data. Secrets Manager stores the information as a JSON structure of key/value pairs that the Lambda
rotation function knows how to parse.
If you store custom information in the secret by using the CreateSecret, UpdateSecret, or PutSecretValue API operations instead of the Secrets Manager console, or by using the Other secret type in the console, then you must code your Lambda rotation function to parse and interpret those values.
List<E> versionStages
A list of all of the staging labels currently attached to this version of the secret.
Date createdDate
The date and time that this version of the secret was created.
Integer maxResults
(Optional) Limits the number of results that you want to include in the response. If you don't include this
parameter, it defaults to a value that's specific to the operation. If additional items exist beyond the maximum
you specify, the NextToken response element is present and has a value (isn't null). Include that
value as the NextToken request parameter in the next call to the operation to get the next part of
the results. Note that Secrets Manager might return fewer results than the maximum even when there are more
results available. You should check NextToken after every operation to ensure that you receive all
of the results.
String nextToken
(Optional) Use this parameter in a request if you receive a NextToken response in a previous request
that indicates that there's more output available. In a subsequent call, set it to the value of the previous
call's NextToken response to indicate where the output should continue from.
List<E> secretList
A list of the secrets in the account.
String nextToken
If present in the response, this value indicates that there's more output available than what's included in the
current response. This can occur even when the response includes no values at all, such as when you ask for a
filtered view of a very long list. Use this value in the NextToken request parameter in a subsequent
call to the operation to continue processing and get the next part of the output. You should repeat this until
the NextToken response element comes back empty (as null).
String secretId
The identifier for the secret containing the versions you want to list. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Integer maxResults
(Optional) Limits the number of results that you want to include in the response. If you don't include this
parameter, it defaults to a value that's specific to the operation. If additional items exist beyond the maximum
you specify, the NextToken response element is present and has a value (isn't null). Include that
value as the NextToken request parameter in the next call to the operation to get the next part of
the results. Note that Secrets Manager might return fewer results than the maximum even when there are more
results available. You should check NextToken after every operation to ensure that you receive all
of the results.
String nextToken
(Optional) Use this parameter in a request if you receive a NextToken response in a previous request
that indicates that there's more output available. In a subsequent call, set it to the value of the previous
call's NextToken response to indicate where the output should continue from.
Boolean includeDeprecated
(Optional) Specifies that you want the results to include versions that do not have any staging labels attached to them. Such versions are considered deprecated and are subject to deletion by Secrets Manager as needed.
List<E> versions
The list of the currently available versions of the specified secret.
String nextToken
If present in the response, this value indicates that there's more output available than what's included in the
current response. This can occur even when the response includes no values at all, such as when you ask for a
filtered view of a very long list. Use this value in the NextToken request parameter in a subsequent
call to the operation to continue processing and get the next part of the output. You should repeat this until
the NextToken response element comes back empty (as null).
String aRN
The Amazon Resource Name (ARN) for the secret.
Secrets Manager automatically adds several random characters to the name at the end of the ARN when you initially create a secret. This affects only the ARN and not the actual friendly name. This ensures that if you create a new secret with the same name as an old secret that you previously deleted, then users with access to the old secret don't automatically get access to the new secret because the ARNs are different.
String name
The friendly name of the secret.
String secretId
Specifies the secret to which you want to attach the resource-based policy. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
String resourcePolicy
A JSON-formatted string constructed according to the grammar and syntax for an AWS resource-based policy. The policy in the string identifies who can access or manage this secret and its versions. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide.
String secretId
Specifies the secret to which you want to add a new version. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret. The secret must already exist.
String clientRequestToken
(Optional) Specifies a unique identifier for the new version of the secret.
If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The
CLI or SDK generates a random UUID for you and includes that in the request. If you don't use the SDK and instead
generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a
ClientRequestToken yourself for new versions and include that value in the request.
This value helps ensure idempotency. Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during the Lambda rotation function's processing. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.
If the ClientRequestToken value isn't already associated with a version of the secret then a new
version of the secret is created.
If a version with this value already exists and that version's SecretString or
SecretBinary values are the same as those in the request then the request is ignored (the operation
is idempotent).
If a version with this value already exists and that version's SecretString and
SecretBinary values are different from those in the request then the request fails because you
cannot modify an existing secret version. You can only create new versions to store new secret values.
This value becomes the SecretVersionId of the new version.
ByteBuffer secretBinary
(Optional) Specifies binary data that you want to encrypt and store in the new version of the secret. To use this
parameter in the command-line tools, we recommend that you store your binary data in a file and then use the
appropriate technique for your tool to pass the contents of the file as a parameter. Either
SecretBinary or SecretString must have a value, but not both. They cannot both be
empty.
This parameter is not accessible if the secret using the Secrets Manager console.
String secretString
(Optional) Specifies text data that you want to encrypt and store in this new version of the secret. Either
SecretString or SecretBinary must have a value, but not both. They cannot both be
empty.
If you create this secret by using the Secrets Manager console then Secrets Manager puts the protected secret
text in only the SecretString parameter. The Secrets Manager console stores the information as a
JSON structure of key/value pairs that the default Lambda rotation function knows how to parse.
For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide.
For example:
[{"username":"bob"},{"password":"abc123xyz456"}]
If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.
List<E> versionStages
(Optional) Specifies a list of staging labels that are attached to this version of the secret. These staging labels are used to track the versions through the rotation process by the Lambda rotation function.
A staging label must be unique to a single version of the secret. If you specify a staging label that's already associated with a different version of the same secret then that staging label is automatically removed from the other version and attached to this version.
If you do not specify a value for VersionStages then Secrets Manager automatically moves the staging
label AWSCURRENT to this new version.
String aRN
The Amazon Resource Name (ARN) for the secret for which you just created a version.
String name
The friendly name of the secret for which you just created or updated a version.
String versionId
The unique identifier of the version of the secret you just created or updated.
List<E> versionStages
The list of staging labels that are currently attached to this version of the secret. Staging labels are used to track a version as it progresses through the secret rotation process.
String secretId
Specifies the secret that you want to restore from a previously scheduled deletion. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
String secretId
Specifies the secret that you want to rotate. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
String clientRequestToken
(Optional) Specifies a unique identifier for the new version of the secret that helps ensure idempotency.
If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The
CLI or SDK generates a random UUID for you and includes that in the request for this parameter. If you don't use
the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a
ClientRequestToken yourself for new versions and include that value in the request.
You only need to specify your own value if you are implementing your own retry logic and want to ensure that a given secret is not created twice. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.
Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during the function's processing.
If the ClientRequestToken value isn't already associated with a version of the secret then a new
version of the secret is created.
If a version with this value already exists and that version's SecretString and
SecretBinary values are the same as the request, then the request is ignored (the operation is
idempotent).
If a version with this value already exists and that version's SecretString and
SecretBinary values are different from the request then an error occurs because you cannot modify an
existing secret value.
This value becomes the SecretVersionId of the new version.
String rotationLambdaARN
(Optional) Specifies the ARN of the Lambda function that can rotate the secret.
RotationRulesType rotationRules
A structure that defines the rotation configuration for this secret.
Long automaticallyAfterDays
Specifies the number of days between automatic scheduled rotations of the secret.
String aRN
The Amazon Resource Name (ARN) of the secret.
For more information about ARNs in Secrets Manager, see Policy Resources in the AWS Secrets Manager User Guide.
String name
The friendly name of the secret. You can use forward slashes in the name to represent a path hierarchy. For
example, /prod/databases/dbserver1 could represent the secret for a server named
dbserver1 in the folder databases in the folder prod.
String description
The user-provided description of the secret.
String kmsKeyId
The ARN or alias of the AWS KMS customer master key (CMK) that's used to encrypt the SecretString
and SecretBinary fields in each version of the secret. If you don't provide a key, then Secrets
Manager defaults to encrypting the secret fields with the default KMS CMK (the one named
awssecretsmanager) for this account.
Boolean rotationEnabled
Indicated whether automatic, scheduled rotation is enabled for this secret.
String rotationLambdaARN
The ARN of an AWS Lambda function that's invoked by Secrets Manager to rotate and expire the secret either automatically per the schedule or manually by a call to RotateSecret.
RotationRulesType rotationRules
A structure that defines the rotation configuration for the secret.
Date lastRotatedDate
The last date and time that the rotation process for this secret was invoked.
Date lastChangedDate
The last date and time that this secret was modified in any way.
Date lastAccessedDate
The last date that this secret was accessed. This value is truncated to midnight of the date and therefore shows only the date, not the time.
Date deletedDate
The date and time on which this secret was deleted. Not present on active secrets. The secret can be recovered
until the number of days in the recovery window has passed, as specified in the RecoveryWindowInDays
parameter of the DeleteSecret operation.
List<E> tags
The list of user-defined tags that are associated with the secret. To add tags to a secret, use TagResource. To remove tags, use UntagResource.
Map<K,V> secretVersionsToStages
A list of all of the currently assigned SecretVersionStage staging labels and the
SecretVersionId that each is attached to. Staging labels are used to keep track of the different
versions during the rotation process.
A version that does not have any SecretVersionStage is considered deprecated and subject to
deletion. Such versions are not included in this list.
String versionId
The unique version identifier of this version of the secret.
List<E> versionStages
An array of staging labels that are currently associated with this version of the secret.
Date lastAccessedDate
The date that this version of the secret was last accessed. Note that the resolution of this field is at the date level and does not include the time.
Date createdDate
The date and time this version of the secret was created.
String secretId
The identifier for the secret that you want to attach tags to. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
List<E> tags
The tags to attach to the secret. Each element in the list consists of a Key and a
Value.
This parameter to the API requires a JSON text string argument. For information on how to format a JSON parameter
for the various command line tool environments, see Using JSON for
Parameters in the AWS CLI User Guide. For the AWS CLI, you can also use the syntax:
--Tags Key="Key1",Value="Value1",Key="Key2",Value="Value2"[,…]
String secretId
The identifier for the secret that you want to remove tags from. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
List<E> tagKeys
A list of tag key names to remove from the secret. You don't specify the value. Both the key and its associated value are removed.
This parameter to the API requires a JSON text string argument. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide.
String secretId
Specifies the secret that you want to update or to which you want to add a new version. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
String clientRequestToken
(Optional) If you want to add a new version to the secret, this parameter specifies a unique identifier for the new version that helps ensure idempotency.
If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The
CLI or SDK generates a random UUID for you and includes that in the request. If you don't use the SDK and instead
generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a
ClientRequestToken yourself for new versions and include that value in the request.
You typically only need to interact with this value if you implement your own retry logic and want to ensure that a given secret is not created twice. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.
Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during the Lambda rotation function's processing.
If the ClientRequestToken value isn't already associated with a version of the secret then a new
version of the secret is created.
If a version with this value already exists and that version's SecretString and
SecretBinary values are the same as those in the request then the request is ignored (the operation
is idempotent).
If a version with this value already exists and that version's SecretString and
SecretBinary values are different from the request then an error occurs because you cannot modify an
existing secret value.
This value becomes the SecretVersionId of the new version.
String description
(Optional) Specifies a user-provided description of the secret.
String kmsKeyId
(Optional) Specifies the ARN or alias of the AWS KMS customer master key (CMK) to be used to encrypt the protected text in the versions of this secret.
If you don't specify this value, then Secrets Manager defaults to using the default CMK in the account (the one
named aws/secretsmanager). If a AWS KMS CMK with that name doesn't exist, then Secrets Manager
creates it for you automatically the first time it needs to encrypt a version's Plaintext or
PlaintextString fields.
You can only use the account's default CMK to encrypt and decrypt if you call this operation using credentials from the same account that owns the secret. If the secret is in a different account, then you must create a custom CMK and provide the ARN in this field.
ByteBuffer secretBinary
(Optional) Specifies binary data that you want to encrypt and store in the new version of the secret. To use this
parameter in the command-line tools, we recommend that you store your binary data in a file and then use the
appropriate technique for your tool to pass the contents of the file as a parameter. Either
SecretBinary or SecretString must have a value, but not both. They cannot both be
empty.
This parameter is not accessible using the Secrets Manager console.
String secretString
(Optional) Specifies text data that you want to encrypt and store in this new version of the secret. Either
SecretBinary or SecretString must have a value, but not both. They cannot both be
empty.
If you create this secret by using the Secrets Manager console then Secrets Manager puts the protected secret
text in only the SecretString parameter. The Secrets Manager console stores the information as a
JSON structure of key/value pairs that the default Lambda rotation function knows how to parse.
For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide. For example:
[{"username":"bob"},{"password":"abc123xyz456"}]
If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.
String aRN
The ARN of this secret.
Secrets Manager automatically adds several random characters to the name at the end of the ARN when you initially create a secret. This affects only the ARN and not the actual friendly name. This ensures that if you create a new secret with the same name as an old secret that you previously deleted, then users with access to the old secret don't automatically get access to the new secret because the ARNs are different.
String name
The friendly name of this secret.
String versionId
If a version of the secret was created or updated by this operation, then its unique identifier is returned.
String secretId
Specifies the secret with the version whose list of staging labels you want to modify. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
String versionStage
The list of staging labels to add to this version.
String removeFromVersionId
(Optional) Specifies the secret version ID of the version that the staging labels are to be removed from.
If you want to move a label to a new version, you do not have to explicitly remove it with this parameter. Adding
a label using the MoveToVersionId parameter automatically removes it from the old version. However,
if you do include both the "MoveTo" and "RemoveFrom" parameters, then the move is successful only if the staging
labels are actually present on the "RemoveFrom" version. If a staging label was on a different version than
"RemoveFrom", then the request fails.
String moveToVersionId
(Optional) The secret version ID that you want to add the staging labels to.
If any of the staging labels are already attached to a different version of the secret, then they are removed from that version before adding them to this version.
Copyright © 2018. All rights reserved.