com.amazonaws.services.simpleworkflow.model

Class StartWorkflowExecutionRequest

java.lang.Object

com.amazonaws.AmazonWebServiceRequest

com.amazonaws.services.simpleworkflow.model.StartWorkflowExecutionRequest

All Implemented Interfaces:

ReadLimitInfo, Serializable, Cloneable

public class StartWorkflowExecutionRequest
extends AmazonWebServiceRequest
implements Serializable, Cloneable

Container for the parameters to the StartWorkflowExecution operation.

Starts an execution of the workflow type in the specified domain using the provided workflowId and input data.

This action returns the newly started workflow execution.

Access Control

You can use IAM policies to control this action's access to Amazon SWF resources as follows:

• Use a Resource element with the domain name to limit the action to only specified domains.
• Use an Action element to allow or deny permission to call this action.
• Constrain the following parameters by using a Condition element with the appropriate keys.
  • tagList.member.0 : The key is swf:tagList.member.0 .
  • tagList.member.1 : The key is swf:tagList.member.1 .
  • tagList.member.2 : The key is swf:tagList.member.2 .
  • tagList.member.3 : The key is swf:tagList.member.3 .
  • tagList.member.4 : The key is swf:tagList.member.4 .
  • taskList : String constraint. The key is swf:taskList.name .
  • workflowType.name : String constraint. The key is swf:workflowType.name .
  • workflowType.version : String constraint. The key is swf:workflowType.version .

If the caller does not have sufficient permissions to invoke the action, or the parameter values fall outside the specified constraints, the action fails. The associated event attribute's cause parameter will be set to OPERATION_NOT_PERMITTED. For details and example IAM policies, see Using IAM to Manage Access to Amazon SWF Workflows .

See Also:

AmazonSimpleWorkflow.startWorkflowExecution(StartWorkflowExecutionRequest), Serialized Form

Field Summary

Fields inherited from class com.amazonaws.AmazonWebServiceRequest

NOOP

Constructor Summary

Constructors

Constructor and Description
StartWorkflowExecutionRequest()

Method Summary

Methods

Modifier and Type	Method and Description
StartWorkflowExecutionRequest	clone()
boolean	equals(Object obj)
String	getChildPolicy() If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout.
String	getDomain() The name of the domain in which the workflow execution is created.
String	getExecutionStartToCloseTimeout() The total duration for this workflow execution.
String	getInput() The input for the workflow execution.
String	getLambdaRole() The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions.
List<String>	getTagList() The list of tags to associate with the workflow execution.
TaskList	getTaskList() The task list to use for the decision tasks generated for this workflow execution.
String	getTaskPriority() The task priority to use for this workflow execution.
String	getTaskStartToCloseTimeout() Specifies the maximum duration of decision tasks for this workflow execution.
String	getWorkflowId() The user defined identifier associated with the workflow execution.
WorkflowType	getWorkflowType() The type of the workflow to start.
int	hashCode()
void	setChildPolicy(ChildPolicy childPolicy) If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout.
void	setChildPolicy(String childPolicy) If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout.
void	setDomain(String domain) The name of the domain in which the workflow execution is created.
void	setExecutionStartToCloseTimeout(String executionStartToCloseTimeout) The total duration for this workflow execution.
void	setInput(String input) The input for the workflow execution.
void	setLambdaRole(String lambdaRole) The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions.
void	setTagList(Collection<String> tagList) The list of tags to associate with the workflow execution.
void	setTaskList(TaskList taskList) The task list to use for the decision tasks generated for this workflow execution.
void	setTaskPriority(String taskPriority) The task priority to use for this workflow execution.
void	setTaskStartToCloseTimeout(String taskStartToCloseTimeout) Specifies the maximum duration of decision tasks for this workflow execution.
void	setWorkflowId(String workflowId) The user defined identifier associated with the workflow execution.
void	setWorkflowType(WorkflowType workflowType) The type of the workflow to start.
String	toString() Returns a string representation of this object; useful for testing and debugging.
StartWorkflowExecutionRequest	withChildPolicy(ChildPolicy childPolicy) If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout.
StartWorkflowExecutionRequest	withChildPolicy(String childPolicy) If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout.
StartWorkflowExecutionRequest	withDomain(String domain) The name of the domain in which the workflow execution is created.
StartWorkflowExecutionRequest	withExecutionStartToCloseTimeout(String executionStartToCloseTimeout) The total duration for this workflow execution.
StartWorkflowExecutionRequest	withInput(String input) The input for the workflow execution.
StartWorkflowExecutionRequest	withLambdaRole(String lambdaRole) The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions.
StartWorkflowExecutionRequest	withTagList(Collection<String> tagList) The list of tags to associate with the workflow execution.
StartWorkflowExecutionRequest	withTagList(String... tagList) The list of tags to associate with the workflow execution.
StartWorkflowExecutionRequest	withTaskList(TaskList taskList) The task list to use for the decision tasks generated for this workflow execution.
StartWorkflowExecutionRequest	withTaskPriority(String taskPriority) The task priority to use for this workflow execution.
StartWorkflowExecutionRequest	withTaskStartToCloseTimeout(String taskStartToCloseTimeout) Specifies the maximum duration of decision tasks for this workflow execution.
StartWorkflowExecutionRequest	withWorkflowId(String workflowId) The user defined identifier associated with the workflow execution.
StartWorkflowExecutionRequest	withWorkflowType(WorkflowType workflowType) The type of the workflow to start.

Methods inherited from class com.amazonaws.AmazonWebServiceRequest

copyBaseTo, getCloneRoot, getCloneSource, getCustomQueryParameters, getCustomRequestHeaders, getGeneralProgressListener, getReadLimit, getRequestClientOptions, getRequestCredentials, getRequestMetricCollector, getSdkClientExecutionTimeout, getSdkRequestTimeout, putCustomQueryParameter, putCustomRequestHeader, setGeneralProgressListener, setRequestCredentials, setRequestMetricCollector, setSdkClientExecutionTimeout, setSdkRequestTimeout, withGeneralProgressListener, withRequestMetricCollector, withSdkClientExecutionTimeout, withSdkRequestTimeout

Methods inherited from class java.lang.Object

finalize, getClass, notify, notifyAll, wait, wait, wait

Constructor Detail

StartWorkflowExecutionRequest

public StartWorkflowExecutionRequest()

Method Detail

getDomain

public String getDomain()

The name of the domain in which the workflow execution is created.

Constraints:
Length: 1 - 256

Returns:

The name of the domain in which the workflow execution is created.

setDomain

public void setDomain(String domain)

The name of the domain in which the workflow execution is created.

Constraints:
Length: 1 - 256

Parameters:

domain - The name of the domain in which the workflow execution is created.

withDomain

public StartWorkflowExecutionRequest withDomain(String domain)

The name of the domain in which the workflow execution is created.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 1 - 256

Parameters:

domain - The name of the domain in which the workflow execution is created.

Returns:

A reference to this updated object so that method calls can be chained together.

getWorkflowId

public String getWorkflowId()

The user defined identifier associated with the workflow execution. You can use this to associate a custom identifier with the workflow execution. You may specify the same identifier if a workflow execution is logically a restart of a previous execution. You cannot have two open workflow executions with the same workflowId at the same time.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

Constraints:
Length: 1 - 256

Returns:

The user defined identifier associated with the workflow execution. You can use this to associate a custom identifier with the workflow execution. You may specify the same identifier if a workflow execution is logically a restart of a previous execution. You cannot have two open workflow executions with the same workflowId at the same time.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

setWorkflowId

public void setWorkflowId(String workflowId)

The user defined identifier associated with the workflow execution. You can use this to associate a custom identifier with the workflow execution. You may specify the same identifier if a workflow execution is logically a restart of a previous execution. You cannot have two open workflow executions with the same workflowId at the same time.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

Constraints:
Length: 1 - 256

Parameters:

workflowId - The user defined identifier associated with the workflow execution. You can use this to associate a custom identifier with the workflow execution. You may specify the same identifier if a workflow execution is logically a restart of a previous execution. You cannot have two open workflow executions with the same workflowId at the same time.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

withWorkflowId

public StartWorkflowExecutionRequest withWorkflowId(String workflowId)

The user defined identifier associated with the workflow execution. You can use this to associate a custom identifier with the workflow execution. You may specify the same identifier if a workflow execution is logically a restart of a previous execution. You cannot have two open workflow executions with the same workflowId at the same time.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 1 - 256

Parameters:

workflowId - The user defined identifier associated with the workflow execution. You can use this to associate a custom identifier with the workflow execution. You may specify the same identifier if a workflow execution is logically a restart of a previous execution. You cannot have two open workflow executions with the same workflowId at the same time.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

Returns:

A reference to this updated object so that method calls can be chained together.

getWorkflowType

public WorkflowType getWorkflowType()

The type of the workflow to start.

Returns:

The type of the workflow to start.

setWorkflowType

public void setWorkflowType(WorkflowType workflowType)

The type of the workflow to start.

Parameters:

workflowType - The type of the workflow to start.

withWorkflowType

public StartWorkflowExecutionRequest withWorkflowType(WorkflowType workflowType)

The type of the workflow to start.

Returns a reference to this object so that method calls can be chained together.

Parameters:

workflowType - The type of the workflow to start.

Returns:

A reference to this updated object so that method calls can be chained together.

getTaskList

public TaskList getTaskList()

The task list to use for the decision tasks generated for this workflow execution. This overrides the defaultTaskList specified when registering the workflow type. A task list for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task list was specified at registration time then a fault will be returned.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

Returns:

The task list to use for the decision tasks generated for this workflow execution. This overrides the defaultTaskList specified when registering the workflow type. A task list for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task list was specified at registration time then a fault will be returned.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

setTaskList

public void setTaskList(TaskList taskList)

The task list to use for the decision tasks generated for this workflow execution. This overrides the defaultTaskList specified when registering the workflow type. A task list for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task list was specified at registration time then a fault will be returned.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

Parameters:

taskList - The task list to use for the decision tasks generated for this workflow execution. This overrides the defaultTaskList specified when registering the workflow type. A task list for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task list was specified at registration time then a fault will be returned.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

withTaskList

public StartWorkflowExecutionRequest withTaskList(TaskList taskList)

The task list to use for the decision tasks generated for this workflow execution. This overrides the defaultTaskList specified when registering the workflow type. A task list for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task list was specified at registration time then a fault will be returned.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

Returns a reference to this object so that method calls can be chained together.

Parameters:

taskList - The task list to use for the decision tasks generated for this workflow execution. This overrides the defaultTaskList specified when registering the workflow type. A task list for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task list was specified at registration time then a fault will be returned.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (- |  - Ÿ). Also, it must not contain the literal string "arn".

Returns:

A reference to this updated object so that method calls can be chained together.

getTaskPriority

public String getTaskPriority()

The task priority to use for this workflow execution. This will override any default priority that was assigned when the workflow type was registered. If not set, then the default task priority for the workflow type will be used. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

Constraints:
Length: 0 - 11

Returns:

The task priority to use for this workflow execution. This will override any default priority that was assigned when the workflow type was registered. If not set, then the default task priority for the workflow type will be used. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

setTaskPriority

public void setTaskPriority(String taskPriority)

The task priority to use for this workflow execution. This will override any default priority that was assigned when the workflow type was registered. If not set, then the default task priority for the workflow type will be used. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

Constraints:
Length: 0 - 11

Parameters:

taskPriority - The task priority to use for this workflow execution. This will override any default priority that was assigned when the workflow type was registered. If not set, then the default task priority for the workflow type will be used. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

withTaskPriority

public StartWorkflowExecutionRequest withTaskPriority(String taskPriority)

The task priority to use for this workflow execution. This will override any default priority that was assigned when the workflow type was registered. If not set, then the default task priority for the workflow type will be used. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 11

Parameters:

taskPriority - The task priority to use for this workflow execution. This will override any default priority that was assigned when the workflow type was registered. If not set, then the default task priority for the workflow type will be used. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

Returns:

A reference to this updated object so that method calls can be chained together.

getInput

public String getInput()

The input for the workflow execution. This is a free form string which should be meaningful to the workflow you are starting. This input is made available to the new workflow execution in the WorkflowExecutionStarted history event.

Constraints:
Length: 0 - 32768

Returns:

The input for the workflow execution. This is a free form string which should be meaningful to the workflow you are starting. This input is made available to the new workflow execution in the WorkflowExecutionStarted history event.

setInput

public void setInput(String input)

The input for the workflow execution. This is a free form string which should be meaningful to the workflow you are starting. This input is made available to the new workflow execution in the WorkflowExecutionStarted history event.

Constraints:
Length: 0 - 32768

Parameters:

input - The input for the workflow execution. This is a free form string which should be meaningful to the workflow you are starting. This input is made available to the new workflow execution in the WorkflowExecutionStarted history event.

withInput

public StartWorkflowExecutionRequest withInput(String input)

The input for the workflow execution. This is a free form string which should be meaningful to the workflow you are starting. This input is made available to the new workflow execution in the WorkflowExecutionStarted history event.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 32768

Parameters:

input - The input for the workflow execution. This is a free form string which should be meaningful to the workflow you are starting. This input is made available to the new workflow execution in the WorkflowExecutionStarted history event.

Returns:

A reference to this updated object so that method calls can be chained together.

getExecutionStartToCloseTimeout

public String getExecutionStartToCloseTimeout()

The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. Exceeding this limit will cause the workflow execution to time out. Unlike some of the other timeout parameters in Amazon SWF, you cannot specify a value of "NONE" for this timeout; there is a one-year max limit on the time that a workflow execution can run. An execution start-to-close timeout must be specified either through this parameter or as a default when the workflow type is registered. If neither this parameter nor a default execution start-to-close timeout is specified, a fault is returned.

Constraints:
Length: 0 - 8

Returns:

The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. Exceeding this limit will cause the workflow execution to time out. Unlike some of the other timeout parameters in Amazon SWF, you cannot specify a value of "NONE" for this timeout; there is a one-year max limit on the time that a workflow execution can run. An execution start-to-close timeout must be specified either through this parameter or as a default when the workflow type is registered. If neither this parameter nor a default execution start-to-close timeout is specified, a fault is returned.

setExecutionStartToCloseTimeout

public void setExecutionStartToCloseTimeout(String executionStartToCloseTimeout)

The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. Exceeding this limit will cause the workflow execution to time out. Unlike some of the other timeout parameters in Amazon SWF, you cannot specify a value of "NONE" for this timeout; there is a one-year max limit on the time that a workflow execution can run. An execution start-to-close timeout must be specified either through this parameter or as a default when the workflow type is registered. If neither this parameter nor a default execution start-to-close timeout is specified, a fault is returned.

Constraints:
Length: 0 - 8

Parameters:

executionStartToCloseTimeout - The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. Exceeding this limit will cause the workflow execution to time out. Unlike some of the other timeout parameters in Amazon SWF, you cannot specify a value of "NONE" for this timeout; there is a one-year max limit on the time that a workflow execution can run. An execution start-to-close timeout must be specified either through this parameter or as a default when the workflow type is registered. If neither this parameter nor a default execution start-to-close timeout is specified, a fault is returned.

withExecutionStartToCloseTimeout

public StartWorkflowExecutionRequest withExecutionStartToCloseTimeout(String executionStartToCloseTimeout)

The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. Exceeding this limit will cause the workflow execution to time out. Unlike some of the other timeout parameters in Amazon SWF, you cannot specify a value of "NONE" for this timeout; there is a one-year max limit on the time that a workflow execution can run. An execution start-to-close timeout must be specified either through this parameter or as a default when the workflow type is registered. If neither this parameter nor a default execution start-to-close timeout is specified, a fault is returned.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 8

Parameters:

executionStartToCloseTimeout - The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. Exceeding this limit will cause the workflow execution to time out. Unlike some of the other timeout parameters in Amazon SWF, you cannot specify a value of "NONE" for this timeout; there is a one-year max limit on the time that a workflow execution can run. An execution start-to-close timeout must be specified either through this parameter or as a default when the workflow type is registered. If neither this parameter nor a default execution start-to-close timeout is specified, a fault is returned.

Returns:

A reference to this updated object so that method calls can be chained together.

getTagList

public List<String> getTagList()

The list of tags to associate with the workflow execution. You can specify a maximum of 5 tags. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

Constraints:
Length: 0 - 5

Returns:

The list of tags to associate with the workflow execution. You can specify a maximum of 5 tags. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

setTagList

public void setTagList(Collection<String> tagList)

The list of tags to associate with the workflow execution. You can specify a maximum of 5 tags. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

Constraints:
Length: 0 - 5

Parameters:

tagList - The list of tags to associate with the workflow execution. You can specify a maximum of 5 tags. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

withTagList

public StartWorkflowExecutionRequest withTagList(String... tagList)

The list of tags to associate with the workflow execution. You can specify a maximum of 5 tags. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

NOTE: This method appends the values to the existing list (if any). Use setTagList(java.util.Collection) or withTagList(java.util.Collection) if you want to override the existing values.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 5

Parameters:

tagList - The list of tags to associate with the workflow execution. You can specify a maximum of 5 tags. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

Returns:

A reference to this updated object so that method calls can be chained together.

withTagList

public StartWorkflowExecutionRequest withTagList(Collection<String> tagList)

The list of tags to associate with the workflow execution. You can specify a maximum of 5 tags. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 5

Parameters:

tagList - The list of tags to associate with the workflow execution. You can specify a maximum of 5 tags. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

Returns:

A reference to this updated object so that method calls can be chained together.

getTaskStartToCloseTimeout

public String getTaskStartToCloseTimeout()

Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.

Constraints:
Length: 0 - 8

Returns:

Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.

setTaskStartToCloseTimeout

public void setTaskStartToCloseTimeout(String taskStartToCloseTimeout)

Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.

Constraints:
Length: 0 - 8

Parameters:

taskStartToCloseTimeout - Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.

withTaskStartToCloseTimeout

public StartWorkflowExecutionRequest withTaskStartToCloseTimeout(String taskStartToCloseTimeout)

Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 8

Parameters:

taskStartToCloseTimeout - Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.

Returns:

A reference to this updated object so that method calls can be chained together.

getChildPolicy

public String getChildPolicy()

If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

• TERMINATE: the child executions will be terminated.
• REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
• ABANDON: no action will be taken. The child executions will continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

Returns:

If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

• TERMINATE: the child executions will be terminated.
• REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
• ABANDON: no action will be taken. The child executions will continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.

See Also:

ChildPolicy

setChildPolicy

public void setChildPolicy(String childPolicy)

If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

• TERMINATE: the child executions will be terminated.
• REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
• ABANDON: no action will be taken. The child executions will continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

Parameters:

childPolicy - If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

• TERMINATE: the child executions will be terminated.
• REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
• ABANDON: no action will be taken. The child executions will continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.

See Also:

ChildPolicy

withChildPolicy

public StartWorkflowExecutionRequest withChildPolicy(String childPolicy)

If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

• TERMINATE: the child executions will be terminated.
• REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
• ABANDON: no action will be taken. The child executions will continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

Parameters:

childPolicy - If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

• TERMINATE: the child executions will be terminated.
• REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
• ABANDON: no action will be taken. The child executions will continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.

Returns:

A reference to this updated object so that method calls can be chained together.

See Also:

ChildPolicy

setChildPolicy

public void setChildPolicy(ChildPolicy childPolicy)

If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

• TERMINATE: the child executions will be terminated.
• REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
• ABANDON: no action will be taken. The child executions will continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

Parameters:

childPolicy - If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

• TERMINATE: the child executions will be terminated.
• REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
• ABANDON: no action will be taken. The child executions will continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.

See Also:

ChildPolicy

withChildPolicy

public StartWorkflowExecutionRequest withChildPolicy(ChildPolicy childPolicy)

If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

• TERMINATE: the child executions will be terminated.
• REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
• ABANDON: no action will be taken. The child executions will continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

Parameters:

childPolicy - If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

• TERMINATE: the child executions will be terminated.
• REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
• ABANDON: no action will be taken. The child executions will continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.

Returns:

A reference to this updated object so that method calls can be chained together.

See Also:

ChildPolicy

getLambdaRole

public String getLambdaRole()

The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions. In order for this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be specified either as a default for the workflow type or through this field.

Constraints:
Length: 1 - 1224

Returns:

The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions. In order for this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be specified either as a default for the workflow type or through this field.

setLambdaRole

public void setLambdaRole(String lambdaRole)

The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions. In order for this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be specified either as a default for the workflow type or through this field.

Constraints:
Length: 1 - 1224

Parameters:

lambdaRole - The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions. In order for this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be specified either as a default for the workflow type or through this field.

withLambdaRole

public StartWorkflowExecutionRequest withLambdaRole(String lambdaRole)

The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions. In order for this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be specified either as a default for the workflow type or through this field.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 1 - 1224

Parameters:

lambdaRole - The ARN of an IAM role that authorizes Amazon SWF to invoke AWS Lambda functions. In order for this workflow execution to invoke AWS Lambda functions, an appropriate IAM role must be specified either as a default for the workflow type or through this field.

Returns:

A reference to this updated object so that method calls can be chained together.

toString

public String toString()

Returns a string representation of this object; useful for testing and debugging.

Overrides:

toString in class Object

Returns:

A string representation of this object.

See Also:

Object.toString()

hashCode

public int hashCode()

Overrides:

hashCode in class Object

equals

public boolean equals(Object obj)

Overrides:

equals in class Object

clone

public StartWorkflowExecutionRequest clone()

Overrides:

clone in class AmazonWebServiceRequest