int statusCode
String topicArn
The ARN of the topic whose access control policy you wish to modify.
String label
A unique identifier for the new policy statement.
SdkInternalList<T> aWSAccountIds
The Amazon Web Services account IDs of the users (principals) who will be given access to the specified actions. The users must have Amazon Web Services account, but do not need to be signed up for this service.
SdkInternalList<T> actionNames
The action you want to allow for the specified principal(s).
Valid values: Any Amazon SNS action name, for example Publish.
String id
The Id of an entry in a batch request
String code
An error code representing why the action failed on this entry.
String message
A message explaining why the action failed on this entry.
Boolean senderFault
Specifies whether the error happened due to the caller of the batch API action.
String phoneNumber
The phone number for which you want to check the opt out status.
Boolean isOptedOut
Indicates whether the phone number is opted out:
true – The phone number is opted out, meaning you cannot publish SMS messages to it.
false – The phone number is opted in, meaning you can publish SMS messages to it.
String topicArn
The ARN of the topic for which you wish to confirm a subscription.
String token
Short-lived token sent to an endpoint during the Subscribe action.
String authenticateOnUnsubscribe
Disallows unauthenticated unsubscribes of the subscription. If the value of this parameter is true
and the request has an Amazon Web Services signature, then only the topic owner and the subscription owner can
unsubscribe the endpoint. The unsubscribe action requires Amazon Web Services authentication.
String subscriptionArn
The ARN of the created subscription.
String name
Application names must be made up of only uppercase and lowercase ASCII letters, numbers, underscores, hyphens, and periods, and must be between 1 and 256 characters long.
String platform
The following platforms are supported: ADM (Amazon Device Messaging), APNS (Apple Push Notification Service), APNS_SANDBOX, and GCM (Firebase Cloud Messaging).
SdkInternalMap<K,V> attributes
For a list of attributes, see
SetPlatformApplicationAttributes .
String platformApplicationArn
PlatformApplicationArn is returned.
String platformApplicationArn
PlatformApplicationArn returned from CreatePlatformApplication is used to create a an endpoint.
String token
Unique identifier created by the notification service for an app on a device. The specific name for Token will vary, depending on which notification service is being used. For example, when using APNS as the notification service, you need the device token. Alternatively, when using GCM (Firebase Cloud Messaging) or ADM, the device token equivalent is called the registration ID.
String customUserData
Arbitrary user data to associate with the endpoint. Amazon SNS does not use this data. The data must be in UTF-8 format and less than 2KB.
SdkInternalMap<K,V> attributes
For a list of attributes, see
SetEndpointAttributes .
String endpointArn
EndpointArn returned from CreateEndpoint action.
String name
The name of the topic you want to create.
Constraints: Topic names must be made up of only uppercase and lowercase ASCII letters, numbers, underscores, and hyphens, and must be between 1 and 256 characters long.
For a FIFO (first-in-first-out) topic, the name must end with the .fifo suffix.
SdkInternalMap<K,V> attributes
A map of attributes with their corresponding values.
The following lists the names, descriptions, and values of the special request parameters that the
CreateTopic action uses:
DeliveryPolicy – The policy that defines how Amazon SNS retries failed deliveries to HTTP/S
endpoints.
DisplayName – The display name to use for a topic with SMS subscriptions.
FifoTopic – Set to true to create a FIFO topic.
Policy – The policy that defines who can access your topic. By default, only the topic owner can
publish or subscribe to the topic.
SignatureVersion – The signature version corresponds to the hashing algorithm used while creating
the signature of the notifications, subscription confirmations, or unsubscribe confirmation messages sent by
Amazon SNS. By default, SignatureVersion is set to 1.
TracingConfig – Tracing mode of an Amazon SNS topic. By default TracingConfig is set to
PassThrough, and the topic passes through the tracing header it receives from an Amazon SNS
publisher to its subscriptions. If set to Active, Amazon SNS will vend X-Ray segment data to topic
owner account if the sampled flag in the tracing header is true. This is only supported on standard topics.
The following attribute applies only to server-side encryption:
KmsMasterKeyId – The ID of an Amazon Web Services managed customer master key (CMK) for Amazon SNS
or a custom CMK. For more information, see Key Terms. For
more examples, see KeyId in the Key Management Service API Reference.
The following attributes apply only to FIFO topics:
ArchivePolicy – Adds or updates an inline policy document to archive messages stored in the
specified Amazon SNS topic.
BeginningArchiveTime – The earliest starting point at which a message in the topic’s archive can be
replayed from. This point in time is based on the configured message retention period set by the topic’s message
archiving policy.
ContentBasedDeduplication – Enables content-based deduplication for FIFO topics.
By default, ContentBasedDeduplication is set to false. If you create a FIFO topic and
this attribute is false, you must specify a value for the MessageDeduplicationId
parameter for the Publish action.
When you set ContentBasedDeduplication to true, Amazon SNS uses a SHA-256 hash to
generate the MessageDeduplicationId using the body of the message (but not the attributes of the
message).
(Optional) To override the generated value, you can specify a value for the MessageDeduplicationId
parameter for the Publish action.
SdkInternalList<T> tags
The list of tags to add to a new topic.
To be able to tag a topic on creation, you must have the sns:CreateTopic and
sns:TagResource permissions.
String dataProtectionPolicy
The body of the policy document you want to use for this topic.
You can only add one policy per topic.
The policy must be in JSON string format.
Length Constraints: Maximum length of 30,720.
String topicArn
The Amazon Resource Name (ARN) assigned to the created topic.
String endpointArn
EndpointArn of endpoint to delete.
String platformApplicationArn
PlatformApplicationArn of platform application object to delete.
String phoneNumber
The destination phone number to delete.
String topicArn
The ARN of the topic you want to delete.
String endpointArn
The EndpointArn for mobile app and device.
SdkInternalMap<K,V> attributes
Attributes for endpoint.
String resourceArn
The ARN of the topic whose DataProtectionPolicy you want to get.
For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.
String dataProtectionPolicy
Retrieves the DataProtectionPolicy in JSON string format.
String endpointArn
EndpointArn for GetEndpointAttributes input.
SdkInternalMap<K,V> attributes
Attributes include the following:
CustomUserData – arbitrary user data to associate with the endpoint. Amazon SNS does not use this
data. The data must be in UTF-8 format and less than 2KB.
Enabled – flag that enables/disables delivery to the endpoint. Amazon SNS will set this to false
when a notification service indicates to Amazon SNS that the endpoint is invalid. Users can set it back to true,
typically after updating Token.
Token – device token, also referred to as a registration id, for an app and mobile device. This is
returned from the notification service when an app and mobile device are registered with the notification
service.
The device token for the iOS platform is returned in lowercase.
String platformApplicationArn
PlatformApplicationArn for GetPlatformApplicationAttributesInput.
SdkInternalMap<K,V> attributes
Attributes include the following:
AppleCertificateExpiryDate – The expiry date of the SSL certificate used to configure
certificate-based authentication.
ApplePlatformTeamID – The Apple developer account ID used to configure token-based authentication.
ApplePlatformBundleID – The app identifier used to configure token-based authentication.
AuthenticationMethod – Returns the credential type used when sending push notifications from
application to APNS/APNS_Sandbox, or application to GCM.
APNS – Returns the token or certificate.
GCM – Returns the token or key.
EventEndpointCreated – Topic ARN to which EndpointCreated event notifications should be sent.
EventEndpointDeleted – Topic ARN to which EndpointDeleted event notifications should be sent.
EventEndpointUpdated – Topic ARN to which EndpointUpdate event notifications should be sent.
EventDeliveryFailure – Topic ARN to which DeliveryFailure event notifications should be sent upon
Direct Publish delivery failure (permanent) to one of the application's endpoints.
SdkInternalList<T> attributes
A list of the individual attribute names, such as MonthlySpendLimit, for which you want values.
For all attribute names, see SetSMSAttributes.
If you don't use this parameter, Amazon SNS returns all SMS attributes.
SdkInternalMap<K,V> attributes
The SMS attribute names and their values.
Boolean isInSandbox
Indicates whether the calling Amazon Web Services account is in the SMS sandbox.
String subscriptionArn
The ARN of the subscription whose properties you want to get.
SdkInternalMap<K,V> attributes
A map of the subscription's attributes. Attributes in this map include the following:
ConfirmationWasAuthenticated – true if the subscription confirmation request was
authenticated.
DeliveryPolicy – The JSON serialization of the subscription's delivery policy.
EffectiveDeliveryPolicy – The JSON serialization of the effective delivery policy that takes into
account the topic delivery policy and account system defaults.
FilterPolicy – The filter policy JSON that is assigned to the subscription. For more information,
see Amazon SNS Message
Filtering in the Amazon SNS Developer Guide.
FilterPolicyScope – This attribute lets you choose the filtering scope by using one of the following
string value types:
MessageAttributes (default) – The filter is applied on the message attributes.
MessageBody – The filter is applied on the message body.
Owner – The Amazon Web Services account ID of the subscription's owner.
PendingConfirmation – true if the subscription hasn't been confirmed. To confirm a
pending subscription, call the ConfirmSubscription action with a confirmation token.
RawMessageDelivery – true if raw message delivery is enabled for the subscription. Raw
messages are free of JSON formatting and can be sent to HTTP/S and Amazon SQS endpoints.
RedrivePolicy – When specified, sends undeliverable messages to the specified Amazon SQS dead-letter
queue. Messages that can't be delivered due to client errors (for example, when the subscribed endpoint is
unreachable) or server errors (for example, when the service that powers the subscribed endpoint becomes
unavailable) are held in the dead-letter queue for further analysis or reprocessing.
SubscriptionArn – The subscription's ARN.
TopicArn – The topic ARN that the subscription is associated with.
The following attribute applies only to Amazon Kinesis Data Firehose delivery stream subscriptions:
SubscriptionRoleArn – The ARN of the IAM role that has the following:
Permission to write to the Kinesis Data Firehose delivery stream
Amazon SNS listed as a trusted entity
Specifying a valid ARN for this attribute is required for Kinesis Data Firehose delivery stream subscriptions. For more information, see Fanout to Kinesis Data Firehose delivery streams in the Amazon SNS Developer Guide.
String topicArn
The ARN of the topic whose properties you want to get.
SdkInternalMap<K,V> attributes
A map of the topic's attributes. Attributes in this map include the following:
DeliveryPolicy – The JSON serialization of the topic's delivery policy.
DisplayName – The human-readable name used in the From field for notifications to
email and email-json endpoints.
EffectiveDeliveryPolicy – The JSON serialization of the effective delivery policy, taking system
defaults into account.
Owner – The Amazon Web Services account ID of the topic's owner.
Policy – The JSON serialization of the topic's access control policy.
SignatureVersion – The signature version corresponds to the hashing algorithm used while creating
the signature of the notifications, subscription confirmations, or unsubscribe confirmation messages sent by
Amazon SNS.
By default, SignatureVersion is set to 1. The signature is a Base64-encoded
SHA1withRSA signature.
When you set SignatureVersion to 2. Amazon SNS uses a Base64-encoded SHA256withRSA
signature.
If the API response does not include the SignatureVersion attribute, it means that the
SignatureVersion for the topic has value 1.
SubscriptionsConfirmed – The number of confirmed subscriptions for the topic.
SubscriptionsDeleted – The number of deleted subscriptions for the topic.
SubscriptionsPending – The number of subscriptions pending confirmation for the topic.
TopicArn – The topic's ARN.
TracingConfig – Tracing mode of an Amazon SNS topic. By default TracingConfig is set to
PassThrough, and the topic passes through the tracing header it receives from an Amazon SNS
publisher to its subscriptions. If set to Active, Amazon SNS will vend X-Ray segment data to topic
owner account if the sampled flag in the tracing header is true. This is only supported on standard topics.
The following attribute applies only to server-side-encryption:
KmsMasterKeyId - The ID of an Amazon Web Services managed customer master key (CMK) for Amazon SNS
or a custom CMK. For more information, see Key Terms. For
more examples, see KeyId in the Key Management Service API Reference.
The following attributes apply only to FIFO topics:
FifoTopic – When this is set to true, a FIFO topic is created.
ContentBasedDeduplication – Enables content-based deduplication for FIFO topics.
By default, ContentBasedDeduplication is set to false. If you create a FIFO topic and
this attribute is false, you must specify a value for the MessageDeduplicationId
parameter for the Publish action.
When you set ContentBasedDeduplication to true, Amazon SNS uses a SHA-256 hash to
generate the MessageDeduplicationId using the body of the message (but not the attributes of the
message).
(Optional) To override the generated value, you can specify a value for the MessageDeduplicationId
parameter for the Publish action.
String platformApplicationArn
PlatformApplicationArn for ListEndpointsByPlatformApplicationInput action.
String nextToken
NextToken string is used when calling ListEndpointsByPlatformApplication action to
retrieve additional records that are available after the first page results.
SdkInternalList<T> endpoints
Endpoints returned for ListEndpointsByPlatformApplication action.
String nextToken
NextToken string is returned when calling ListEndpointsByPlatformApplication action if
additional records are available after the first page results.
String nextToken
A NextToken string is returned when you call the ListOriginationNumbers operation if
additional pages of records are available.
SdkInternalList<T> phoneNumbers
A list of the calling account's verified and pending origination numbers.
String nextToken
A NextToken string is used when you call the ListPhoneNumbersOptedOut action to
retrieve additional records that are available after the first page of results.
SdkInternalList<T> phoneNumbers
A list of phone numbers that are opted out of receiving SMS messages. The list is paginated, and each page can contain up to 100 phone numbers.
String nextToken
A NextToken string is returned when you call the ListPhoneNumbersOptedOut action if
additional records are available after the first page of results.
String nextToken
NextToken string is used when calling ListPlatformApplications action to retrieve
additional records that are available after the first page results.
SdkInternalList<T> platformApplications
Platform applications returned when calling ListPlatformApplications action.
String nextToken
NextToken string is returned when calling ListPlatformApplications action if additional
records are available after the first page results.
SdkInternalList<T> phoneNumbers
A list of the calling account's pending and verified phone numbers.
String nextToken
A NextToken string is returned when you call the ListSMSSandboxPhoneNumbersInput
operation if additional pages of records are available.
SdkInternalList<T> subscriptions
A list of subscriptions.
String nextToken
Token to pass along to the next ListSubscriptionsByTopic request. This element is returned if there
are more subscriptions to retrieve.
String nextToken
Token returned by the previous ListSubscriptions request.
SdkInternalList<T> subscriptions
A list of subscriptions.
String nextToken
Token to pass along to the next ListSubscriptions request. This element is returned if there are
more subscriptions to retrieve.
String resourceArn
The ARN of the topic for which to list tags.
SdkInternalList<T> tags
The tags associated with the specified topic.
String nextToken
Token returned by the previous ListTopics request.
SdkInternalList<T> topics
A list of topic ARNs.
String nextToken
Token to pass along to the next ListTopics request. This element is returned if there are additional
topics to retrieve.
String dataType
Amazon SNS supports the following logical data types: String, String.Array, Number, and Binary. For more information, see Message Attribute Data Types.
String stringValue
Strings are Unicode with UTF8 binary encoding. For a list of code values, see ASCII Printable Characters.
ByteBuffer binaryValue
Binary type attributes can store any binary data, for example, compressed data, encrypted data, or images.
String phoneNumber
The phone number to opt in. Use E.164 format.
Date createdAt
The date and time when the phone number was created.
String phoneNumber
The phone number.
String status
The status of the phone number.
String iso2CountryCode
The two-character code for the country or region, in ISO 3166-1 alpha-2 format.
String routeType
The list of supported routes.
SdkInternalList<T> numberCapabilities
The capabilities of each phone number.
String platformApplicationArn
PlatformApplicationArn for platform application object.
SdkInternalMap<K,V> attributes
Attributes for platform application object.
String topicArn
The Amazon resource name (ARN) of the topic you want to batch publish to.
SdkInternalList<T> publishBatchRequestEntries
A list of PublishBatch request entries to be sent to the SNS topic.
String id
An identifier for the message in this batch.
The Ids of a batch request must be unique within a request.
This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters, hyphens(-), and underscores (_).
String message
The body of the message.
String subject
The subject of the batch message.
String messageStructure
Set MessageStructure to json if you want to send a different message for each protocol.
For example, using one publish action, you can send a short message to your SMS subscribers and a longer message
to your email subscribers. If you set MessageStructure to json, the value of the
Message parameter must:
be a syntactically valid JSON object; and
contain at least a top-level JSON key of "default" with a value that is a string.
You can define other top-level keys that define the message you want to send to a specific transport protocol (e.g. http).
SdkInternalMap<K,V> messageAttributes
Each message attribute consists of a Name, Type, and Value. For more
information, see Amazon SNS
message attributes in the Amazon SNS Developer Guide.
String messageDeduplicationId
This parameter applies only to FIFO (first-in-first-out) topics.
The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with
a particular MessageDeduplicationId is sent successfully, subsequent messages with the same
MessageDeduplicationId are accepted successfully but aren't delivered.
Every message must have a unique MessageDeduplicationId.
You may provide a MessageDeduplicationId explicitly.
If you aren't able to provide a MessageDeduplicationId and you enable
ContentBasedDeduplication for your topic, Amazon SNS uses a SHA-256 hash to generate the
MessageDeduplicationId using the body of the message (but not the attributes of the message).
If you don't provide a MessageDeduplicationId and the topic doesn't have
ContentBasedDeduplication set, the action fails with an error.
If the topic has a ContentBasedDeduplication set, your MessageDeduplicationId overrides
the generated one.
When ContentBasedDeduplication is in effect, messages with identical content sent within the
deduplication interval are treated as duplicates and only one copy of the message is delivered.
If you send one message with ContentBasedDeduplication enabled, and then another message with a
MessageDeduplicationId that is the same as the one generated for the first
MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message
is delivered.
The MessageDeduplicationId is available to the consumer of the message (this can be useful for
troubleshooting delivery issues).
If a message is sent successfully but the acknowledgement is lost and the message is resent with the same
MessageDeduplicationId after the deduplication interval, Amazon SNS can't detect duplicate messages.
Amazon SNS continues to keep track of the message deduplication ID even after the message is received and deleted.
The length of MessageDeduplicationId is 128 characters.
MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and
punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
String messageGroupId
This parameter applies only to FIFO (first-in-first-out) topics.
The tag that specifies that a message belongs to a specific message group. Messages that belong to the same
message group are processed in a FIFO manner (however, messages in different message groups might be processed
out of order). To interleave multiple ordered streams within a single topic, use MessageGroupId
values (for example, session data for multiple users). In this scenario, multiple consumers can process the
topic, but the session data of each user is processed in a FIFO fashion.
You must associate a non-empty MessageGroupId with a message. If you don't provide a
MessageGroupId, the action fails.
The length of MessageGroupId is 128 characters.
MessageGroupId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation
(!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
MessageGroupId is required for FIFO topics. You can't use it for standard topics.
SdkInternalList<T> successful
A list of successful PublishBatch responses.
SdkInternalList<T> failed
A list of failed PublishBatch responses.
String id
The Id of an entry in a batch request.
String messageId
An identifier for the message.
String sequenceNumber
This parameter applies only to FIFO (first-in-first-out) topics.
The large, non-consecutive number that Amazon SNS assigns to each message.
The length of SequenceNumber is 128 bits. SequenceNumber continues to increase for a
particular MessageGroupId.
String topicArn
The topic you want to publish to.
If you don't specify a value for the TopicArn parameter, you must specify a value for the
PhoneNumber or TargetArn parameters.
String targetArn
If you don't specify a value for the TargetArn parameter, you must specify a value for the
PhoneNumber or TopicArn parameters.
String phoneNumber
The phone number to which you want to deliver an SMS message. Use E.164 format.
If you don't specify a value for the PhoneNumber parameter, you must specify a value for the
TargetArn or TopicArn parameters.
String message
The message you want to send.
If you are publishing to a topic and you want to send the same message to all transport protocols, include the
text of the message as a String value. If you want to send different messages for each transport protocol, set
the value of the MessageStructure parameter to json and use a JSON object for the
Message parameter.
Constraints:
With the exception of SMS, messages must be UTF-8 encoded strings and at most 256 KB in size (262,144 bytes, not 262,144 characters).
For SMS, each message can contain up to 140 characters. This character limit depends on the encoding schema. For example, an SMS message can contain 160 GSM characters, 140 ASCII characters, or 70 UCS-2 characters.
If you publish a message that exceeds this size limit, Amazon SNS sends the message as multiple messages, each fitting within the size limit. Messages aren't truncated mid-word but are cut off at whole-word boundaries.
The total size limit for a single SMS Publish action is 1,600 characters.
JSON-specific constraints:
Keys in the JSON object that correspond to supported transport protocols must have simple JSON string values.
The values will be parsed (unescaped) before they are used in outgoing messages.
Outbound notifications are JSON encoded (meaning that the characters will be reescaped for sending).
Values have a minimum length of 0 (the empty string, "", is allowed).
Values have a maximum length bounded by the overall message size (so, including multiple protocols may limit message sizes).
Non-string values will cause the key to be ignored.
Keys that do not correspond to supported transport protocols are ignored.
Duplicate keys are not allowed.
Failure to parse or validate any key or value in the message will cause the Publish call to return
an error (no partial delivery).
String subject
Optional parameter to be used as the "Subject" line when the message is delivered to email endpoints. This field will also be included, if present, in the standard JSON messages delivered to other endpoints.
Constraints: Subjects must be ASCII text that begins with a letter, number, or punctuation mark; must not include line breaks or control characters; and must be less than 100 characters long.
String messageStructure
Set MessageStructure to json if you want to send a different message for each protocol.
For example, using one publish action, you can send a short message to your SMS subscribers and a longer message
to your email subscribers. If you set MessageStructure to json, the value of the
Message parameter must:
be a syntactically valid JSON object; and
contain at least a top-level JSON key of "default" with a value that is a string.
You can define other top-level keys that define the message you want to send to a specific transport protocol (e.g., "http").
Valid value: json
SdkInternalMap<K,V> messageAttributes
Message attributes for Publish action.
String messageDeduplicationId
This parameter applies only to FIFO (first-in-first-out) topics. The MessageDeduplicationId can
contain up to 128 alphanumeric characters (a-z, A-Z, 0-9) and punctuation
(!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
Every message must have a unique MessageDeduplicationId, which is a token used for deduplication of
sent messages. If a message with a particular MessageDeduplicationId is sent successfully, any
message sent with the same MessageDeduplicationId during the 5-minute deduplication interval is
treated as a duplicate.
If the topic has ContentBasedDeduplication set, the system generates a
MessageDeduplicationId based on the contents of the message. Your
MessageDeduplicationId overrides the generated one.
String messageGroupId
This parameter applies only to FIFO (first-in-first-out) topics. The MessageGroupId can contain up
to 128 alphanumeric characters (a-z, A-Z, 0-9) and punctuation
(!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
The MessageGroupId is a tag that specifies that a message belongs to a specific message group.
Messages that belong to the same message group are processed in a FIFO manner (however, messages in different
message groups might be processed out of order). Every message must include a MessageGroupId.
String messageId
Unique identifier assigned to the published message.
Length Constraint: Maximum 100 characters
String sequenceNumber
This response element applies only to FIFO (first-in-first-out) topics.
The sequence number is a large, non-consecutive number that Amazon SNS assigns to each message. The length of
SequenceNumber is 128 bits. SequenceNumber continues to increase for each
MessageGroupId.
String resourceArn
The ARN of the topic whose DataProtectionPolicy you want to add or update.
For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.
String dataProtectionPolicy
The JSON serialization of the topic's DataProtectionPolicy.
The DataProtectionPolicy must be in JSON string format.
Length Constraints: Maximum length of 30,720.
String endpointArn
EndpointArn used for SetEndpointAttributes action.
SdkInternalMap<K,V> attributes
A map of the endpoint attributes. Attributes in this map include the following:
CustomUserData – arbitrary user data to associate with the endpoint. Amazon SNS does not use this
data. The data must be in UTF-8 format and less than 2KB.
Enabled – flag that enables/disables delivery to the endpoint. Amazon SNS will set this to false
when a notification service indicates to Amazon SNS that the endpoint is invalid. Users can set it back to true,
typically after updating Token.
Token – device token, also referred to as a registration id, for an app and mobile device. This is
returned from the notification service when an app and mobile device are registered with the notification
service.
String platformApplicationArn
PlatformApplicationArn for SetPlatformApplicationAttributes action.
SdkInternalMap<K,V> attributes
A map of the platform application attributes. Attributes in this map include the following:
PlatformCredential – The credential received from the notification service.
For ADM, PlatformCredentialis client secret.
For Apple Services using certificate credentials, PlatformCredential is private key.
For Apple Services using token credentials, PlatformCredential is signing key.
For GCM (Firebase Cloud Messaging) using key credentials, there is no PlatformPrincipal. The
PlatformCredential is API key.
For GCM (Firebase Cloud Messaging) using token credentials, there is no PlatformPrincipal. The
PlatformCredential is a JSON formatted private key file. When using the Amazon Web Services CLI, the
file must be in string format and special characters must be ignored. To format the file correctly, Amazon SNS
recommends using the following command: SERVICE_JSON=`jq @json <<< cat service.json`.
PlatformPrincipal – The principal received from the notification service.
For ADM, PlatformPrincipalis client id.
For Apple Services using certificate credentials, PlatformPrincipal is SSL certificate.
For Apple Services using token credentials, PlatformPrincipal is signing key ID.
For GCM (Firebase Cloud Messaging), there is no PlatformPrincipal.
EventEndpointCreated – Topic ARN to which EndpointCreated event notifications are sent.
EventEndpointDeleted – Topic ARN to which EndpointDeleted event notifications are sent.
EventEndpointUpdated – Topic ARN to which EndpointUpdate event notifications are sent.
EventDeliveryFailure – Topic ARN to which DeliveryFailure event notifications are sent
upon Direct Publish delivery failure (permanent) to one of the application's endpoints.
SuccessFeedbackRoleArn – IAM role ARN used to give Amazon SNS write access to use CloudWatch Logs on
your behalf.
FailureFeedbackRoleArn – IAM role ARN used to give Amazon SNS write access to use CloudWatch Logs on
your behalf.
SuccessFeedbackSampleRate – Sample rate percentage (0-100) of successfully delivered messages.
The following attributes only apply to APNs token-based authentication:
ApplePlatformTeamID – The identifier that's assigned to your Apple developer account team.
ApplePlatformBundleID – The bundle identifier that's assigned to your iOS app.
SdkInternalMap<K,V> attributes
The default settings for sending SMS messages from your Amazon Web Services account. You can set values for the following attribute names:
MonthlySpendLimit – The maximum amount in USD that you are willing to spend each month to send SMS
messages. When Amazon SNS determines that sending an SMS message would incur a cost that exceeds this limit, it
stops sending SMS messages within minutes.
Amazon SNS stops sending SMS messages within minutes of the limit being crossed. During that interval, if you continue to send SMS messages, you will incur costs that exceed your limit.
By default, the spend limit is set to the maximum allowed by Amazon SNS. If you want to raise the limit, submit an SNS Limit Increase case. For New limit value, enter your desired monthly spend limit. In the Use Case Description field, explain that you are requesting an SMS monthly spend limit increase.
DeliveryStatusIAMRole – The ARN of the IAM role that allows Amazon SNS to write logs about SMS
deliveries in CloudWatch Logs. For each SMS message that you send, Amazon SNS writes a log that includes the
message price, the success or failure status, the reason for failure (if the message failed), the message dwell
time, and other information.
DeliveryStatusSuccessSamplingRate – The percentage of successful SMS deliveries for which Amazon SNS
will write logs in CloudWatch Logs. The value can be an integer from 0 - 100. For example, to write logs only for
failed deliveries, set this value to 0. To write logs for 10% of your successful deliveries, set it
to 10.
DefaultSenderID – A string, such as your business brand, that is displayed as the sender on the
receiving device. Support for sender IDs varies by country. The sender ID can be 1 - 11 alphanumeric characters,
and it must contain at least one letter.
DefaultSMSType – The type of SMS message that you will send by default. You can assign the following
values:
Promotional – (Default) Noncritical messages, such as marketing messages. Amazon SNS optimizes the
message delivery to incur the lowest cost.
Transactional – Critical messages that support customer transactions, such as one-time passcodes for
multi-factor authentication. Amazon SNS optimizes the message delivery to achieve the highest reliability.
UsageReportS3Bucket – The name of the Amazon S3 bucket to receive daily SMS usage reports from
Amazon SNS. Each day, Amazon SNS will deliver a usage report as a CSV file to the bucket. The report includes the
following information for each SMS message that was successfully delivered by your Amazon Web Services account:
Time that the message was published (in UTC)
Message ID
Destination phone number
Message type
Delivery status
Message price (in USD)
Part number (a message is split into multiple parts if it is too long for a single message)
Total number of parts
To receive the report, the bucket must have a policy that allows the Amazon SNS service principal to perform the
s3:PutObject and s3:GetBucketLocation actions.
For an example bucket policy and usage report, see Monitoring SMS Activity in the Amazon SNS Developer Guide.
String subscriptionArn
The ARN of the subscription to modify.
String attributeName
A map of attributes with their corresponding values.
The following lists the names, descriptions, and values of the special request parameters that this action uses:
DeliveryPolicy – The policy that defines how Amazon SNS retries failed deliveries to HTTP/S
endpoints.
FilterPolicy – The simple JSON object that lets your subscriber receive only a subset of messages,
rather than receiving every message published to the topic.
FilterPolicyScope – This attribute lets you choose the filtering scope by using one of the following
string value types:
MessageAttributes (default) – The filter is applied on the message attributes.
MessageBody – The filter is applied on the message body.
RawMessageDelivery – When set to true, enables raw message delivery to Amazon SQS or
HTTP/S endpoints. This eliminates the need for the endpoints to process JSON formatting, which is otherwise
created for Amazon SNS metadata.
RedrivePolicy – When specified, sends undeliverable messages to the specified Amazon SQS dead-letter
queue. Messages that can't be delivered due to client errors (for example, when the subscribed endpoint is
unreachable) or server errors (for example, when the service that powers the subscribed endpoint becomes
unavailable) are held in the dead-letter queue for further analysis or reprocessing.
The following attribute applies only to Amazon Kinesis Data Firehose delivery stream subscriptions:
SubscriptionRoleArn – The ARN of the IAM role that has the following:
Permission to write to the Kinesis Data Firehose delivery stream
Amazon SNS listed as a trusted entity
Specifying a valid ARN for this attribute is required for Kinesis Data Firehose delivery stream subscriptions. For more information, see Fanout to Kinesis Data Firehose delivery streams in the Amazon SNS Developer Guide.
String attributeValue
The new value for the attribute in JSON format.
String topicArn
The ARN of the topic to modify.
String attributeName
A map of attributes with their corresponding values.
The following lists the names, descriptions, and values of the special request parameters that the
SetTopicAttributes action uses:
ApplicationSuccessFeedbackRoleArn – Indicates failed message delivery status for an Amazon SNS topic
that is subscribed to a platform application endpoint.
DeliveryPolicy – The policy that defines how Amazon SNS retries failed deliveries to HTTP/S
endpoints.
DisplayName – The display name to use for a topic with SMS subscriptions.
Policy – The policy that defines who can access your topic. By default, only the topic owner can
publish or subscribe to the topic.
TracingConfig – Tracing mode of an Amazon SNS topic. By default TracingConfig is set to
PassThrough, and the topic passes through the tracing header it receives from an Amazon SNS
publisher to its subscriptions. If set to Active, Amazon SNS will vend X-Ray segment data to topic
owner account if the sampled flag in the tracing header is true. This is only supported on standard topics.
HTTP
HTTPSuccessFeedbackRoleArn – Indicates successful message delivery status for an Amazon SNS topic
that is subscribed to an HTTP endpoint.
HTTPSuccessFeedbackSampleRate – Indicates percentage of successful messages to sample for an Amazon
SNS topic that is subscribed to an HTTP endpoint.
HTTPFailureFeedbackRoleArn – Indicates failed message delivery status for an Amazon SNS topic that
is subscribed to an HTTP endpoint.
Amazon Kinesis Data Firehose
FirehoseSuccessFeedbackRoleArn – Indicates successful message delivery status for an Amazon SNS
topic that is subscribed to an Amazon Kinesis Data Firehose endpoint.
FirehoseSuccessFeedbackSampleRate – Indicates percentage of successful messages to sample for an
Amazon SNS topic that is subscribed to an Amazon Kinesis Data Firehose endpoint.
FirehoseFailureFeedbackRoleArn – Indicates failed message delivery status for an Amazon SNS topic
that is subscribed to an Amazon Kinesis Data Firehose endpoint.
Lambda
LambdaSuccessFeedbackRoleArn – Indicates successful message delivery status for an Amazon SNS topic
that is subscribed to an Lambda endpoint.
LambdaSuccessFeedbackSampleRate – Indicates percentage of successful messages to sample for an
Amazon SNS topic that is subscribed to an Lambda endpoint.
LambdaFailureFeedbackRoleArn – Indicates failed message delivery status for an Amazon SNS topic that
is subscribed to an Lambda endpoint.
Platform application endpoint
ApplicationSuccessFeedbackRoleArn – Indicates successful message delivery status for an Amazon SNS
topic that is subscribed to an Amazon Web Services application endpoint.
ApplicationSuccessFeedbackSampleRate – Indicates percentage of successful messages to sample for an
Amazon SNS topic that is subscribed to an Amazon Web Services application endpoint.
ApplicationFailureFeedbackRoleArn – Indicates failed message delivery status for an Amazon SNS topic
that is subscribed to an Amazon Web Services application endpoint.
In addition to being able to configure topic attributes for message delivery status of notification messages sent to Amazon SNS application endpoints, you can also configure application attributes for the delivery status of push notification messages sent to push notification services.
For example, For more information, see Using Amazon SNS Application Attributes for Message Delivery Status.
Amazon SQS
SQSSuccessFeedbackRoleArn – Indicates successful message delivery status for an Amazon SNS topic
that is subscribed to an Amazon SQS endpoint.
SQSSuccessFeedbackSampleRate – Indicates percentage of successful messages to sample for an Amazon
SNS topic that is subscribed to an Amazon SQS endpoint.
SQSFailureFeedbackRoleArn – Indicates failed message delivery status for an Amazon SNS topic that is
subscribed to an Amazon SQS endpoint.
The <ENDPOINT>SuccessFeedbackRoleArn and <ENDPOINT>FailureFeedbackRoleArn attributes are used to give Amazon SNS write access to use CloudWatch Logs on your behalf. The <ENDPOINT>SuccessFeedbackSampleRate attribute is for specifying the sample rate percentage (0-100) of successfully delivered messages. After you configure the <ENDPOINT>FailureFeedbackRoleArn attribute, then all failed message deliveries generate CloudWatch Logs.
The following attribute applies only to server-side-encryption:
KmsMasterKeyId – The ID of an Amazon Web Services managed customer master key (CMK) for Amazon SNS
or a custom CMK. For more information, see Key Terms. For
more examples, see KeyId in the Key Management Service API Reference.
SignatureVersion – The signature version corresponds to the hashing algorithm used while creating
the signature of the notifications, subscription confirmations, or unsubscribe confirmation messages sent by
Amazon SNS. By default, SignatureVersion is set to 1.
The following attribute applies only to FIFO topics:
ContentBasedDeduplication – Enables content-based deduplication for FIFO topics.
By default, ContentBasedDeduplication is set to false. If you create a FIFO topic and
this attribute is false, you must specify a value for the MessageDeduplicationId
parameter for the Publish action.
When you set ContentBasedDeduplication to true, Amazon SNS uses a SHA-256 hash to
generate the MessageDeduplicationId using the body of the message (but not the attributes of the
message).
(Optional) To override the generated value, you can specify a value for the MessageDeduplicationId
parameter for the Publish action.
String attributeValue
The new value for the attribute.
String topicArn
The ARN of the topic you want to subscribe to.
String protocol
The protocol that you want to use. Supported protocols include:
http – delivery of JSON-encoded message via HTTP POST
https – delivery of JSON-encoded message via HTTPS POST
email – delivery of message via SMTP
email-json – delivery of JSON-encoded message via SMTP
sms – delivery of message via SMS
sqs – delivery of JSON-encoded message to an Amazon SQS queue
application – delivery of JSON-encoded message to an EndpointArn for a mobile app and device
lambda – delivery of JSON-encoded message to an Lambda function
firehose – delivery of JSON-encoded message to an Amazon Kinesis Data Firehose delivery stream.
String endpoint
The endpoint that you want to receive notifications. Endpoints vary by protocol:
For the http protocol, the (public) endpoint is a URL beginning with http://.
For the https protocol, the (public) endpoint is a URL beginning with https://.
For the email protocol, the endpoint is an email address.
For the email-json protocol, the endpoint is an email address.
For the sms protocol, the endpoint is a phone number of an SMS-enabled device.
For the sqs protocol, the endpoint is the ARN of an Amazon SQS queue.
For the application protocol, the endpoint is the EndpointArn of a mobile app and device.
For the lambda protocol, the endpoint is the ARN of an Lambda function.
For the firehose protocol, the endpoint is the ARN of an Amazon Kinesis Data Firehose delivery
stream.
SdkInternalMap<K,V> attributes
A map of attributes with their corresponding values.
The following lists the names, descriptions, and values of the special request parameters that the
Subscribe action uses:
DeliveryPolicy – The policy that defines how Amazon SNS retries failed deliveries to HTTP/S
endpoints.
FilterPolicy – The simple JSON object that lets your subscriber receive only a subset of messages,
rather than receiving every message published to the topic.
FilterPolicyScope – This attribute lets you choose the filtering scope by using one of the following
string value types:
MessageAttributes (default) – The filter is applied on the message attributes.
MessageBody – The filter is applied on the message body.
RawMessageDelivery – When set to true, enables raw message delivery to Amazon SQS or
HTTP/S endpoints. This eliminates the need for the endpoints to process JSON formatting, which is otherwise
created for Amazon SNS metadata.
RedrivePolicy – When specified, sends undeliverable messages to the specified Amazon SQS dead-letter
queue. Messages that can't be delivered due to client errors (for example, when the subscribed endpoint is
unreachable) or server errors (for example, when the service that powers the subscribed endpoint becomes
unavailable) are held in the dead-letter queue for further analysis or reprocessing.
The following attribute applies only to Amazon Kinesis Data Firehose delivery stream subscriptions:
SubscriptionRoleArn – The ARN of the IAM role that has the following:
Permission to write to the Kinesis Data Firehose delivery stream
Amazon SNS listed as a trusted entity
Specifying a valid ARN for this attribute is required for Kinesis Data Firehose delivery stream subscriptions. For more information, see Fanout to Kinesis Data Firehose delivery streams in the Amazon SNS Developer Guide.
The following attributes apply only to FIFO topics:
ReplayPolicy – Adds or updates an inline policy document for a subscription to replay messages
stored in the specified Amazon SNS topic.
ReplayStatus – Retrieves the status of the subscription message replay, which can be one of the
following:
Completed – The replay has successfully redelivered all messages, and is now delivering newly
published messages. If an ending point was specified in the ReplayPolicy then the subscription will
no longer receive newly published messages.
In progress – The replay is currently replaying the selected messages.
Failed – The replay was unable to complete.
Pending – The default state while the replay initiates.
Boolean returnSubscriptionArn
Sets whether the response from the Subscribe request includes the subscription ARN, even if the
subscription is not yet confirmed.
If you set this parameter to true, the response includes the ARN in all cases, even if the
subscription is not yet confirmed. In addition to the ARN for confirmed subscriptions, the response also includes
the pending subscription ARN value for subscriptions that aren't yet confirmed. A subscription
becomes confirmed when the subscriber calls the ConfirmSubscription action with a confirmation
token.
The default value is false.
String subscriptionArn
The ARN of the subscription if it is confirmed, or the string "pending confirmation" if the subscription requires
confirmation. However, if the API request parameter ReturnSubscriptionArn is true, then the value is
always the subscription ARN, even if the subscription requires confirmation.
String subscriptionArn
The subscription's ARN.
String owner
The subscription's owner.
String protocol
The subscription's protocol.
String endpoint
The subscription's endpoint (format depends on the protocol).
String topicArn
The ARN of the subscription's topic.
String resourceArn
The ARN of the topic to which to add tags.
SdkInternalList<T> tags
The tags to be added to the specified topic. A tag consists of a required key and an optional value.
String topicArn
The topic's ARN.
String subscriptionArn
The ARN of the subscription to be deleted.
String resourceArn
The ARN of the topic from which to remove tags.
SdkInternalList<T> tagKeys
The list of tag keys to remove from the specified topic.
String status
The status of the verification error.
Copyright © 2024. All rights reserved.