Overview  Package   Class  Index  Help 

Did this page help you?

   Yes   No   Tell us about it...
 PREV CLASS   NEXT CLASS FRAMES    NO FRAMES    
SUMMARY: NESTED | FIELD | CONSTR | METHOD DETAIL: FIELD | CONSTR | METHOD

com.amazonaws.services.elastictranscoder.model
Class VideoParameters

java.lang.Object
  extended by com.amazonaws.services.elastictranscoder.model.VideoParameters
All Implemented Interfaces:
Serializable
public class VideoParameters
extends Object
implements Serializable

See Also:
Serialized Form

Constructor Summary
VideoParameters()
           
 
Method Summary
 boolean equals(Object obj)
           
 String getAspectRatio()
          
 String getBitRate()
          The bit rate of the video stream in the output file, in kilobits/second.
 String getCodec()
          The video codec for the output file.
 Map<String,String> getCodecOptions()
          Profile
 String getDisplayAspectRatio()
          The value that Elastic Transcoder adds to the metadata in the output file.
 String getFixedGOP()
          Whether to use a fixed value for FixedGOP.
 String getFrameRate()
          The frames per second for the video stream in the output file.
 String getKeyframesMaxDist()
          The maximum number of frames between key frames.
 String getMaxHeight()
          The maximum height of the output video in pixels.
 String getMaxWidth()
          The maximum width of the output video in pixels.
 String getPaddingPolicy()
          When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth and MaxHeight.
 String getResolution()
          
 String getSizingPolicy()
          Specify one of the following values to control scaling of the output video:
 int hashCode()
           
 void setAspectRatio(String aspectRatio)
          
 void setBitRate(String bitRate)
          The bit rate of the video stream in the output file, in kilobits/second.
 void setCodec(String codec)
          The video codec for the output file.
 void setCodecOptions(Map<String,String> codecOptions)
          Profile
 void setDisplayAspectRatio(String displayAspectRatio)
          The value that Elastic Transcoder adds to the metadata in the output file.
 void setFixedGOP(String fixedGOP)
          Whether to use a fixed value for FixedGOP.
 void setFrameRate(String frameRate)
          The frames per second for the video stream in the output file.
 void setKeyframesMaxDist(String keyframesMaxDist)
          The maximum number of frames between key frames.
 void setMaxHeight(String maxHeight)
          The maximum height of the output video in pixels.
 void setMaxWidth(String maxWidth)
          The maximum width of the output video in pixels.
 void setPaddingPolicy(String paddingPolicy)
          When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth and MaxHeight.
 void setResolution(String resolution)
          
 void setSizingPolicy(String sizingPolicy)
          Specify one of the following values to control scaling of the output video:
 String toString()
          Returns a string representation of this object; useful for testing and debugging.
 VideoParameters withAspectRatio(String aspectRatio)
          
 VideoParameters withBitRate(String bitRate)
          The bit rate of the video stream in the output file, in kilobits/second.
 VideoParameters withCodec(String codec)
          The video codec for the output file.
 VideoParameters withCodecOptions(Map<String,String> codecOptions)
          Profile
 VideoParameters withDisplayAspectRatio(String displayAspectRatio)
          The value that Elastic Transcoder adds to the metadata in the output file.
 VideoParameters withFixedGOP(String fixedGOP)
          Whether to use a fixed value for FixedGOP.
 VideoParameters withFrameRate(String frameRate)
          The frames per second for the video stream in the output file.
 VideoParameters withKeyframesMaxDist(String keyframesMaxDist)
          The maximum number of frames between key frames.
 VideoParameters withMaxHeight(String maxHeight)
          The maximum height of the output video in pixels.
 VideoParameters withMaxWidth(String maxWidth)
          The maximum width of the output video in pixels.
 VideoParameters withPaddingPolicy(String paddingPolicy)
          When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth and MaxHeight.
 VideoParameters withResolution(String resolution)
          
 VideoParameters withSizingPolicy(String sizingPolicy)
          Specify one of the following values to control scaling of the output video:
 
Methods inherited from class java.lang.Object
getClass, notify, notifyAll, wait, wait, wait
 

Constructor Detail

VideoParameters

public VideoParameters()
Method Detail

getCodec

public String getCodec()
The video codec for the output file. Valid values include H.264 and vp8. You can only specify vp8 when the container type is webm.

Constraints:
Pattern: (^H\.264$)|(^vp8$)

Returns:
The video codec for the output file. Valid values include H.264 and vp8. You can only specify vp8 when the container type is webm.

setCodec

public void setCodec(String codec)
The video codec for the output file. Valid values include H.264 and vp8. You can only specify vp8 when the container type is webm.

Constraints:
Pattern: (^H\.264$)|(^vp8$)

Parameters:
codec - The video codec for the output file. Valid values include H.264 and vp8. You can only specify vp8 when the container type is webm.

withCodec

public VideoParameters withCodec(String codec)
The video codec for the output file. Valid values include H.264 and vp8. You can only specify vp8 when the container type is webm.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^H\.264$)|(^vp8$)

Parameters:
codec - The video codec for the output file. Valid values include H.264 and vp8. You can only specify vp8 when the container type is webm.
Returns:
A reference to this updated object so that method calls can be chained together.

getCodecOptions

public Map<String,String> getCodecOptions()
Profile

The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:

Level

The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:

1, 1b, 1.1, 1.2, 1.3, 2, 2.1, 2.2, 3, 3.1, 3.2, 4, 4.1

MaxReferenceFrames

The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:

Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)

where Width in pixels and Height in pixels represent the resolution of the output video and Maximum decoded picture buffer in macroblocks depends on the value of the Level object. (A macroblock is a block of pixels measuring 16x16.)

Note that the calculation for maximum decoded picture buffer, which is similar to the calculation for maximum reference frames, uses macroblocks instead of pixels for the width and height of the video.

To determine the value of maximum decoded picture buffer in macroblocks, see the following list (Level - Maximum decoded picture buffer):

Constraints:
Length: 0 - 30

Returns:
Profile

The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:

  • baseline: The profile most commonly used for videoconferencing and for mobile applications.
  • main: The profile used for standard-definition digital TV broadcasts.
  • high: The profile used for high-definition digital TV broadcasts and for Blu-ray discs.

Level

The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:

1, 1b, 1.1, 1.2, 1.3, 2, 2.1, 2.2, 3, 3.1, 3.2, 4, 4.1

MaxReferenceFrames

The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:

Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)

where Width in pixels and Height in pixels represent the resolution of the output video and Maximum decoded picture buffer in macroblocks depends on the value of the Level object. (A macroblock is a block of pixels measuring 16x16.)

Note that the calculation for maximum decoded picture buffer, which is similar to the calculation for maximum reference frames, uses macroblocks instead of pixels for the width and height of the video.

To determine the value of maximum decoded picture buffer in macroblocks, see the following list (Level - Maximum decoded picture buffer):

  • 1 - 396
  • 1b - 396
  • 1.1 - 900
  • 1.2 - 2376
  • 1.3 - 2376
  • 2 - 2376
  • 2.1 - 4752
  • 2.2 - 8100
  • 3 - 8100
  • 3.1 - 18000
  • 3.2 - 20480
  • 4 - 32768
  • 4.1 - 32768

setCodecOptions

public void setCodecOptions(Map<String,String> codecOptions)
Profile

The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:

Level

The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:

1, 1b, 1.1, 1.2, 1.3, 2, 2.1, 2.2, 3, 3.1, 3.2, 4, 4.1

MaxReferenceFrames

The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:

Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)

where Width in pixels and Height in pixels represent the resolution of the output video and Maximum decoded picture buffer in macroblocks depends on the value of the Level object. (A macroblock is a block of pixels measuring 16x16.)

Note that the calculation for maximum decoded picture buffer, which is similar to the calculation for maximum reference frames, uses macroblocks instead of pixels for the width and height of the video.

To determine the value of maximum decoded picture buffer in macroblocks, see the following list (Level - Maximum decoded picture buffer):

Constraints:
Length: 0 - 30

Parameters:
codecOptions - Profile

The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:

  • baseline: The profile most commonly used for videoconferencing and for mobile applications.
  • main: The profile used for standard-definition digital TV broadcasts.
  • high: The profile used for high-definition digital TV broadcasts and for Blu-ray discs.

Level

The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:

1, 1b, 1.1, 1.2, 1.3, 2, 2.1, 2.2, 3, 3.1, 3.2, 4, 4.1

MaxReferenceFrames

The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:

Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)

where Width in pixels and Height in pixels represent the resolution of the output video and Maximum decoded picture buffer in macroblocks depends on the value of the Level object. (A macroblock is a block of pixels measuring 16x16.)

Note that the calculation for maximum decoded picture buffer, which is similar to the calculation for maximum reference frames, uses macroblocks instead of pixels for the width and height of the video.

To determine the value of maximum decoded picture buffer in macroblocks, see the following list (Level - Maximum decoded picture buffer):

  • 1 - 396
  • 1b - 396
  • 1.1 - 900
  • 1.2 - 2376
  • 1.3 - 2376
  • 2 - 2376
  • 2.1 - 4752
  • 2.2 - 8100
  • 3 - 8100
  • 3.1 - 18000
  • 3.2 - 20480
  • 4 - 32768
  • 4.1 - 32768

withCodecOptions

public VideoParameters withCodecOptions(Map<String,String> codecOptions)
Profile

The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:

Level

The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:

1, 1b, 1.1, 1.2, 1.3, 2, 2.1, 2.2, 3, 3.1, 3.2, 4, 4.1

MaxReferenceFrames

The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:

Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)

where Width in pixels and Height in pixels represent the resolution of the output video and Maximum decoded picture buffer in macroblocks depends on the value of the Level object. (A macroblock is a block of pixels measuring 16x16.)

Note that the calculation for maximum decoded picture buffer, which is similar to the calculation for maximum reference frames, uses macroblocks instead of pixels for the width and height of the video.

To determine the value of maximum decoded picture buffer in macroblocks, see the following list (Level - Maximum decoded picture buffer):

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 30

Parameters:
codecOptions - Profile

The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:

  • baseline: The profile most commonly used for videoconferencing and for mobile applications.
  • main: The profile used for standard-definition digital TV broadcasts.
  • high: The profile used for high-definition digital TV broadcasts and for Blu-ray discs.

Level

The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:

1, 1b, 1.1, 1.2, 1.3, 2, 2.1, 2.2, 3, 3.1, 3.2, 4, 4.1

MaxReferenceFrames

The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:

Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)

where Width in pixels and Height in pixels represent the resolution of the output video and Maximum decoded picture buffer in macroblocks depends on the value of the Level object. (A macroblock is a block of pixels measuring 16x16.)

Note that the calculation for maximum decoded picture buffer, which is similar to the calculation for maximum reference frames, uses macroblocks instead of pixels for the width and height of the video.

To determine the value of maximum decoded picture buffer in macroblocks, see the following list (Level - Maximum decoded picture buffer):

  • 1 - 396
  • 1b - 396
  • 1.1 - 900
  • 1.2 - 2376
  • 1.3 - 2376
  • 2 - 2376
  • 2.1 - 4752
  • 2.2 - 8100
  • 3 - 8100
  • 3.1 - 18000
  • 3.2 - 20480
  • 4 - 32768
  • 4.1 - 32768
Returns:
A reference to this updated object so that method calls can be chained together.

getKeyframesMaxDist

public String getKeyframesMaxDist()
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.

Constraints:
Pattern: ^\d{1,6}$

Returns:
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.

setKeyframesMaxDist

public void setKeyframesMaxDist(String keyframesMaxDist)
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.

Constraints:
Pattern: ^\d{1,6}$

Parameters:
keyframesMaxDist - The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.

withKeyframesMaxDist

public VideoParameters withKeyframesMaxDist(String keyframesMaxDist)
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: ^\d{1,6}$

Parameters:
keyframesMaxDist - The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
Returns:
A reference to this updated object so that method calls can be chained together.

getFixedGOP

public String getFixedGOP()
Whether to use a fixed value for FixedGOP. Valid values are true and false:

Constraints:
Pattern: (^true$)|(^false$)

Returns:
Whether to use a fixed value for FixedGOP. Valid values are true and false:
  • true: Elastic Transcoder uses the value of KeyframesMaxDist for the distance between key frames (the number of frames in a group of pictures, or GOP).
  • false: The distance between key frames can vary.

setFixedGOP

public void setFixedGOP(String fixedGOP)
Whether to use a fixed value for FixedGOP. Valid values are true and false:

Constraints:
Pattern: (^true$)|(^false$)

Parameters:
fixedGOP - Whether to use a fixed value for FixedGOP. Valid values are true and false:
  • true: Elastic Transcoder uses the value of KeyframesMaxDist for the distance between key frames (the number of frames in a group of pictures, or GOP).
  • false: The distance between key frames can vary.

withFixedGOP

public VideoParameters withFixedGOP(String fixedGOP)
Whether to use a fixed value for FixedGOP. Valid values are true and false:

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^true$)|(^false$)

Parameters:
fixedGOP - Whether to use a fixed value for FixedGOP. Valid values are true and false:
  • true: Elastic Transcoder uses the value of KeyframesMaxDist for the distance between key frames (the number of frames in a group of pictures, or GOP).
  • false: The distance between key frames can vary.
Returns:
A reference to this updated object so that method calls can be chained together.

getBitRate

public String getBitRate()
The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of Level and Profile. If you specify auto, Elastic Transcoder uses the detected bit rate of the input source. If you specify a value other than auto, we recommend that you specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile:

Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)

Constraints:
Pattern: (^\d{2,5}$)|(^auto$)

Returns:
The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of Level and Profile. If you specify auto, Elastic Transcoder uses the detected bit rate of the input source. If you specify a value other than auto, we recommend that you specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile:

Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)

  • 1 - 64 : 80
  • 1b - 128 : 160
  • 1.1 - 192 : 240
  • 1.2 - 384 : 480
  • 1.3 - 768 : 960
  • 2 - 2000 : 2500
  • 3 - 10000 : 12500
  • 3.1 - 14000 : 17500
  • 3.2 - 20000 : 25000
  • 4 - 20000 : 25000
  • 4.1 - 50000 : 62500

setBitRate

public void setBitRate(String bitRate)
The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of Level and Profile. If you specify auto, Elastic Transcoder uses the detected bit rate of the input source. If you specify a value other than auto, we recommend that you specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile:

Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)

Constraints:
Pattern: (^\d{2,5}$)|(^auto$)

Parameters:
bitRate - The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of Level and Profile. If you specify auto, Elastic Transcoder uses the detected bit rate of the input source. If you specify a value other than auto, we recommend that you specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile:

Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)

  • 1 - 64 : 80
  • 1b - 128 : 160
  • 1.1 - 192 : 240
  • 1.2 - 384 : 480
  • 1.3 - 768 : 960
  • 2 - 2000 : 2500
  • 3 - 10000 : 12500
  • 3.1 - 14000 : 17500
  • 3.2 - 20000 : 25000
  • 4 - 20000 : 25000
  • 4.1 - 50000 : 62500

withBitRate

public VideoParameters withBitRate(String bitRate)
The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of Level and Profile. If you specify auto, Elastic Transcoder uses the detected bit rate of the input source. If you specify a value other than auto, we recommend that you specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile:

Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^\d{2,5}$)|(^auto$)

Parameters:
bitRate - The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of Level and Profile. If you specify auto, Elastic Transcoder uses the detected bit rate of the input source. If you specify a value other than auto, we recommend that you specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile:

Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)

  • 1 - 64 : 80
  • 1b - 128 : 160
  • 1.1 - 192 : 240
  • 1.2 - 384 : 480
  • 1.3 - 768 : 960
  • 2 - 2000 : 2500
  • 3 - 10000 : 12500
  • 3.1 - 14000 : 17500
  • 3.2 - 20000 : 25000
  • 4 - 20000 : 25000
  • 4.1 - 50000 : 62500
Returns:
A reference to this updated object so that method calls can be chained together.

getFrameRate

public String getFrameRate()
The frames per second for the video stream in the output file. Valid values include:

auto, 10, 15, 23.97, 24, 25, 29.97, 30, 60

If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If you specify a frame rate, we recommend that you perform the following calculation:

Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)

where:

The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):

Constraints:
Pattern: (^auto$)|(^10$)|(^15$)|(^23.97$)|(^24$)|(^25$)|(^29.97$)|(^30$)|(^60$)

Returns:
The frames per second for the video stream in the output file. Valid values include:

auto, 10, 15, 23.97, 24, 25, 29.97, 30, 60

If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If you specify a frame rate, we recommend that you perform the following calculation:

Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)

where:

  • width in pixels and height in pixels represent the Resolution of the output video.
  • maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level.

The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):

  • 1 - 380160
  • 1b - 380160
  • 1.1 - 76800
  • 1.2 - 1536000
  • 1.3 - 3041280
  • 2 - 3041280
  • 2.1 - 5068800
  • 2.2 - 5184000
  • 3 - 10368000
  • 3.1 - 27648000
  • 3.2 - 55296000
  • 4 - 62914560
  • 4.1 - 62914560

setFrameRate

public void setFrameRate(String frameRate)
The frames per second for the video stream in the output file. Valid values include:

auto, 10, 15, 23.97, 24, 25, 29.97, 30, 60

If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If you specify a frame rate, we recommend that you perform the following calculation:

Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)

where:

The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):

Constraints:
Pattern: (^auto$)|(^10$)|(^15$)|(^23.97$)|(^24$)|(^25$)|(^29.97$)|(^30$)|(^60$)

Parameters:
frameRate - The frames per second for the video stream in the output file. Valid values include:

auto, 10, 15, 23.97, 24, 25, 29.97, 30, 60

If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If you specify a frame rate, we recommend that you perform the following calculation:

Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)

where:

  • width in pixels and height in pixels represent the Resolution of the output video.
  • maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level.

The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):

  • 1 - 380160
  • 1b - 380160
  • 1.1 - 76800
  • 1.2 - 1536000
  • 1.3 - 3041280
  • 2 - 3041280
  • 2.1 - 5068800
  • 2.2 - 5184000
  • 3 - 10368000
  • 3.1 - 27648000
  • 3.2 - 55296000
  • 4 - 62914560
  • 4.1 - 62914560

withFrameRate

public VideoParameters withFrameRate(String frameRate)
The frames per second for the video stream in the output file. Valid values include:

auto, 10, 15, 23.97, 24, 25, 29.97, 30, 60

If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If you specify a frame rate, we recommend that you perform the following calculation:

Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)

where:

The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^auto$)|(^10$)|(^15$)|(^23.97$)|(^24$)|(^25$)|(^29.97$)|(^30$)|(^60$)

Parameters:
frameRate - The frames per second for the video stream in the output file. Valid values include:

auto, 10, 15, 23.97, 24, 25, 29.97, 30, 60

If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If you specify a frame rate, we recommend that you perform the following calculation:

Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)

where:

  • width in pixels and height in pixels represent the Resolution of the output video.
  • maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level.

The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):

  • 1 - 380160
  • 1b - 380160
  • 1.1 - 76800
  • 1.2 - 1536000
  • 1.3 - 3041280
  • 2 - 3041280
  • 2.1 - 5068800
  • 2.2 - 5184000
  • 3 - 10368000
  • 3.1 - 27648000
  • 3.2 - 55296000
  • 4 - 62914560
  • 4.1 - 62914560
Returns:
A reference to this updated object so that method calls can be chained together.

getResolution

public String getResolution()

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The width and height of the video in the output file, in pixels. Valid values are auto and width x height:

  • auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the following rules.
  • width x height: The width and height of the output video in pixels.

Note the following about specifying the width and height:

  • The width must be an even integer between 128 and 4096, inclusive.
  • The height must be an even integer between 96 and 3072, inclusive.
  • If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
  • If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
  • We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
    • 1 - 25344
    • 1b - 25344
    • 1.1 - 101376
    • 1.2 - 101376
    • 1.3 - 101376
    • 2 - 101376
    • 2.1 - 202752
    • 2.2 - 404720
    • 3 - 404720
    • 3.1 - 921600
    • 3.2 - 1310720
    • 4 - 2097152
    • 4.1 - 2097152

Constraints:
Pattern: (^auto$)|(^\d{1,5}x\d{1,5}$)

Returns:

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The width and height of the video in the output file, in pixels. Valid values are auto and width x height:

  • auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the following rules.
  • width x height: The width and height of the output video in pixels.

Note the following about specifying the width and height:

  • The width must be an even integer between 128 and 4096, inclusive.
  • The height must be an even integer between 96 and 3072, inclusive.
  • If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
  • If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
  • We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
    • 1 - 25344
    • 1b - 25344
    • 1.1 - 101376
    • 1.2 - 101376
    • 1.3 - 101376
    • 2 - 101376
    • 2.1 - 202752
    • 2.2 - 404720
    • 3 - 404720
    • 3.1 - 921600
    • 3.2 - 1310720
    • 4 - 2097152
    • 4.1 - 2097152

setResolution

public void setResolution(String resolution)

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The width and height of the video in the output file, in pixels. Valid values are auto and width x height:

  • auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the following rules.
  • width x height: The width and height of the output video in pixels.

Note the following about specifying the width and height:

  • The width must be an even integer between 128 and 4096, inclusive.
  • The height must be an even integer between 96 and 3072, inclusive.
  • If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
  • If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
  • We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
    • 1 - 25344
    • 1b - 25344
    • 1.1 - 101376
    • 1.2 - 101376
    • 1.3 - 101376
    • 2 - 101376
    • 2.1 - 202752
    • 2.2 - 404720
    • 3 - 404720
    • 3.1 - 921600
    • 3.2 - 1310720
    • 4 - 2097152
    • 4.1 - 2097152

Constraints:
Pattern: (^auto$)|(^\d{1,5}x\d{1,5}$)

Parameters:
resolution -

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The width and height of the video in the output file, in pixels. Valid values are auto and width x height:

  • auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the following rules.
  • width x height: The width and height of the output video in pixels.

Note the following about specifying the width and height:

  • The width must be an even integer between 128 and 4096, inclusive.
  • The height must be an even integer between 96 and 3072, inclusive.
  • If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
  • If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
  • We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
    • 1 - 25344
    • 1b - 25344
    • 1.1 - 101376
    • 1.2 - 101376
    • 1.3 - 101376
    • 2 - 101376
    • 2.1 - 202752
    • 2.2 - 404720
    • 3 - 404720
    • 3.1 - 921600
    • 3.2 - 1310720
    • 4 - 2097152
    • 4.1 - 2097152

withResolution

public VideoParameters withResolution(String resolution)

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The width and height of the video in the output file, in pixels. Valid values are auto and width x height:

  • auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the following rules.
  • width x height: The width and height of the output video in pixels.

Note the following about specifying the width and height:

  • The width must be an even integer between 128 and 4096, inclusive.
  • The height must be an even integer between 96 and 3072, inclusive.
  • If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
  • If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
  • We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
    • 1 - 25344
    • 1b - 25344
    • 1.1 - 101376
    • 1.2 - 101376
    • 1.3 - 101376
    • 2 - 101376
    • 2.1 - 202752
    • 2.2 - 404720
    • 3 - 404720
    • 3.1 - 921600
    • 3.2 - 1310720
    • 4 - 2097152
    • 4.1 - 2097152

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^auto$)|(^\d{1,5}x\d{1,5}$)

Parameters:
resolution -

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The width and height of the video in the output file, in pixels. Valid values are auto and width x height:

  • auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the following rules.
  • width x height: The width and height of the output video in pixels.

Note the following about specifying the width and height:

  • The width must be an even integer between 128 and 4096, inclusive.
  • The height must be an even integer between 96 and 3072, inclusive.
  • If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
  • If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
  • We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
    • 1 - 25344
    • 1b - 25344
    • 1.1 - 101376
    • 1.2 - 101376
    • 1.3 - 101376
    • 2 - 101376
    • 2.1 - 202752
    • 2.2 - 404720
    • 3 - 404720
    • 3.1 - 921600
    • 3.2 - 1310720
    • 4 - 2097152
    • 4.1 - 2097152
Returns:
A reference to this updated object so that method calls can be chained together.

getAspectRatio

public String getAspectRatio()

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The display aspect ratio of the video in the output file. Valid values include:

auto, 1:1, 4:3, 3:2, 16:9

If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.

If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.

Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)

Returns:

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The display aspect ratio of the video in the output file. Valid values include:

auto, 1:1, 4:3, 3:2, 16:9

If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.

If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.

setAspectRatio

public void setAspectRatio(String aspectRatio)

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The display aspect ratio of the video in the output file. Valid values include:

auto, 1:1, 4:3, 3:2, 16:9

If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.

If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.

Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)

Parameters:
aspectRatio -

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The display aspect ratio of the video in the output file. Valid values include:

auto, 1:1, 4:3, 3:2, 16:9

If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.

If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.

withAspectRatio

public VideoParameters withAspectRatio(String aspectRatio)

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The display aspect ratio of the video in the output file. Valid values include:

auto, 1:1, 4:3, 3:2, 16:9

If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.

If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)

Parameters:
aspectRatio -

To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and DisplayAspectRatio instead of Resolution and AspectRatio. The two groups of settings are mutually exclusive. Do not use them together.

The display aspect ratio of the video in the output file. Valid values include:

auto, 1:1, 4:3, 3:2, 16:9

If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.

If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.

Returns:
A reference to this updated object so that method calls can be chained together.

getMaxWidth

public String getMaxWidth()
The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.

Constraints:
Pattern: (^auto$)|(^\d{2,4}$)

Returns:
The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.

setMaxWidth

public void setMaxWidth(String maxWidth)
The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.

Constraints:
Pattern: (^auto$)|(^\d{2,4}$)

Parameters:
maxWidth - The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.

withMaxWidth

public VideoParameters withMaxWidth(String maxWidth)
The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^auto$)|(^\d{2,4}$)

Parameters:
maxWidth - The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.
Returns:
A reference to this updated object so that method calls can be chained together.

getMaxHeight

public String getMaxHeight()
The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.

Constraints:
Pattern: (^auto$)|(^\d{2,4}$)

Returns:
The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.

setMaxHeight

public void setMaxHeight(String maxHeight)
The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.

Constraints:
Pattern: (^auto$)|(^\d{2,4}$)

Parameters:
maxHeight - The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.

withMaxHeight

public VideoParameters withMaxHeight(String maxHeight)
The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^auto$)|(^\d{2,4}$)

Parameters:
maxHeight - The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.
Returns:
A reference to this updated object so that method calls can be chained together.

getDisplayAspectRatio

public String getDisplayAspectRatio()
The value that Elastic Transcoder adds to the metadata in the output file.

Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)

Returns:
The value that Elastic Transcoder adds to the metadata in the output file.

setDisplayAspectRatio

public void setDisplayAspectRatio(String displayAspectRatio)
The value that Elastic Transcoder adds to the metadata in the output file.

Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)

Parameters:
displayAspectRatio - The value that Elastic Transcoder adds to the metadata in the output file.

withDisplayAspectRatio

public VideoParameters withDisplayAspectRatio(String displayAspectRatio)
The value that Elastic Transcoder adds to the metadata in the output file.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)

Parameters:
displayAspectRatio - The value that Elastic Transcoder adds to the metadata in the output file.
Returns:
A reference to this updated object so that method calls can be chained together.

getSizingPolicy

public String getSizingPolicy()
Specify one of the following values to control scaling of the output video:

Constraints:
Pattern: (^Fit$)|(^Fill$)|(^Stretch$)|(^Keep$)|(^ShrinkToFit$)|(^ShrinkToFill$)

Returns:
Specify one of the following values to control scaling of the output video:

  • Fit: Elastic Transcoder scales the output video so it matches the value that you specified in either MaxWidth or MaxHeight without exceeding the other value.
  • Fill: Elastic Transcoder scales the output video so it matches the value that you specified in either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic Transcoder centers the output video and then crops it in the dimension (if any) that exceeds the maximum value.
  • Stretch: Elastic Transcoder stretches the output video to match the values that you specified for MaxWidth and MaxHeight. If the relative proportions of the input video and the output video are different, the output video will be distorted.
  • Keep: Elastic Transcoder does not scale the output video. If either dimension of the input video exceeds the values that you specified for MaxWidth and MaxHeight, Elastic Transcoder crops the output video.
  • ShrinkToFit: Elastic Transcoder scales the output video down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without exceeding either value. If you specify this option, Elastic Transcoder does not scale the video up.
  • ShrinkToFill: Elastic Transcoder scales the output video down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without dropping below either value. If you specify this option, Elastic Transcoder does not scale the video up.

setSizingPolicy

public void setSizingPolicy(String sizingPolicy)
Specify one of the following values to control scaling of the output video:

Constraints:
Pattern: (^Fit$)|(^Fill$)|(^Stretch$)|(^Keep$)|(^ShrinkToFit$)|(^ShrinkToFill$)

Parameters:
sizingPolicy - Specify one of the following values to control scaling of the output video:

  • Fit: Elastic Transcoder scales the output video so it matches the value that you specified in either MaxWidth or MaxHeight without exceeding the other value.
  • Fill: Elastic Transcoder scales the output video so it matches the value that you specified in either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic Transcoder centers the output video and then crops it in the dimension (if any) that exceeds the maximum value.
  • Stretch: Elastic Transcoder stretches the output video to match the values that you specified for MaxWidth and MaxHeight. If the relative proportions of the input video and the output video are different, the output video will be distorted.
  • Keep: Elastic Transcoder does not scale the output video. If either dimension of the input video exceeds the values that you specified for MaxWidth and MaxHeight, Elastic Transcoder crops the output video.
  • ShrinkToFit: Elastic Transcoder scales the output video down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without exceeding either value. If you specify this option, Elastic Transcoder does not scale the video up.
  • ShrinkToFill: Elastic Transcoder scales the output video down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without dropping below either value. If you specify this option, Elastic Transcoder does not scale the video up.

withSizingPolicy

public VideoParameters withSizingPolicy(String sizingPolicy)
Specify one of the following values to control scaling of the output video:

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^Fit$)|(^Fill$)|(^Stretch$)|(^Keep$)|(^ShrinkToFit$)|(^ShrinkToFill$)

Parameters:
sizingPolicy - Specify one of the following values to control scaling of the output video:

  • Fit: Elastic Transcoder scales the output video so it matches the value that you specified in either MaxWidth or MaxHeight without exceeding the other value.
  • Fill: Elastic Transcoder scales the output video so it matches the value that you specified in either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic Transcoder centers the output video and then crops it in the dimension (if any) that exceeds the maximum value.
  • Stretch: Elastic Transcoder stretches the output video to match the values that you specified for MaxWidth and MaxHeight. If the relative proportions of the input video and the output video are different, the output video will be distorted.
  • Keep: Elastic Transcoder does not scale the output video. If either dimension of the input video exceeds the values that you specified for MaxWidth and MaxHeight, Elastic Transcoder crops the output video.
  • ShrinkToFit: Elastic Transcoder scales the output video down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without exceeding either value. If you specify this option, Elastic Transcoder does not scale the video up.
  • ShrinkToFill: Elastic Transcoder scales the output video down so that its dimensions match the values that you specified for at least one of MaxWidth and MaxHeight without dropping below either value. If you specify this option, Elastic Transcoder does not scale the video up.
Returns:
A reference to this updated object so that method calls can be chained together.

getPaddingPolicy

public String getPaddingPolicy()
When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth and MaxHeight.

Constraints:
Pattern: (^Pad$)|(^NoPad$)

Returns:
When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth and MaxHeight.

setPaddingPolicy

public void setPaddingPolicy(String paddingPolicy)
When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth and MaxHeight.

Constraints:
Pattern: (^Pad$)|(^NoPad$)

Parameters:
paddingPolicy - When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth and MaxHeight.

withPaddingPolicy

public VideoParameters withPaddingPolicy(String paddingPolicy)
When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth and MaxHeight.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Pattern: (^Pad$)|(^NoPad$)

Parameters:
paddingPolicy - When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth and MaxHeight.
Returns:
A reference to this updated object so that method calls can be chained together.

toString

public String toString()
Returns a string representation of this object; useful for testing and debugging.

Overrides:
toString in class Object
Returns:
A string representation of this object.
See Also:
Object.toString()

hashCode

public int hashCode()
Overrides:
hashCode in class Object

equals

public boolean equals(Object obj)
Overrides:
equals in class Object
Overview  Package   Class  Index  Help 
 PREV CLASS   NEXT CLASS FRAMES    NO FRAMES    
SUMMARY: NESTED | FIELD | CONSTR | METHOD DETAIL: FIELD | CONSTR | METHOD
Copyright © 2010 Amazon Web Services, Inc. All Rights Reserved.