A photo, video, or audio recording acquired or used in healthcare. The actual content may be inline or provided by direct reference.
Subclass of hl7.model.DomainResource (A resource that includes narrative, extensions, and contained resources.)
- Value parameters:
- `type`
- A code that classifies whether the media is an image, video or audio recording or some other media category.
- basedOn
- A procedure that is fulfilled in whole or in part by the creation of this media.
- bodySite
- Indicates the site on the subject's body where the observation was made (i.e. the target site).
- contained
- These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.
- content
- The actual content of the media - inline or by direct reference to the media source file.
- created
- The date and time(s) at which the media was collected.
- device
- The device used to collect the media.
- deviceName
- The name of the device / manufacturer of the device that was used to make the recording.
- duration
- The duration of the recording in seconds - for audio and video.
- encounter
- The encounter that establishes the context for this media.
- extension
- May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
- frames
- The number of frames in a photo. This is used with a multi-page fax, or an imaging acquisition context that takes multiple slices in a single image, or an animated gif. If there is more than one frame, this SHALL have a value in order to alert interface software that a multi-frame capable rendering widget is required.
- height
- Height of the image in pixels (photo/video).
- id
- The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
- identifier
- Identifiers associated with the image - these may include identifiers for the image itself, identifiers for the context of its collection (e.g. series ids) and context ids such as accession numbers or other workflow identifiers.
- implicitRules
- A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
- issued
- The date and time this version of the media was made available to providers, typically after having been reviewed.
- language
- The base language in which the resource is written.
- meta
- The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.
- modality
- Details of the type of the media - usually, how it was acquired (what type of device). If images sourced from a DICOM system, are wrapped in a Media resource, then this is the modality.
- modifierExtension
- May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
- note
- Comments made about the media by the performer, subject or other participants.
- operator
- The person who administered the collection of the image.
- partOf
- A larger event of which this particular event is a component or step.
- reasonCode
- Describes why the event occurred in coded or textual form.
- status
- The current state of the {{title}}.
- subject
- Who/What this Media is a record of.
- text
- A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.
- view
- The name of the imaging view e.g. Lateral or Antero-posterior (AP).
- width
- Width of the image in pixels (photo/video).
- Constructor:
Introduces the fields
type
, view, note, width, partOf, status, issued, device, height, frames, basedOn, subject, content, modality, operator, bodySite, duration, encounter, identifier, created, reasonCode, deviceName.- Companion:
- object
Value members
Inherited methods
Slower than nodalMap, but should work with subtypes (e.g. PositiveInt). If you must use it, then:
Slower than nodalMap, but should work with subtypes (e.g. PositiveInt). If you must use it, then:
T
should not be a Choice[_], a LitSeq[_] or an Option[_]- It may require a type parameter sometimes (e.g.
sampleResource >>[BUNDLE_TYPE] { (_: BUNDLE_TYPE) => BUNDLE_TYPE.SEARCHSET }
)
- Inherited from:
- FHIRObject
- Inherited from:
- FHIRObject
Extract values of type From, and map to LitSeq[To] using fn: From => To. Unlike >>, this is safe even if From is a Choice[], a LitSeq[] or an Option[_] Quite slow, slower than nodalExtract
Extract values of type From, and map to LitSeq[To] using fn: From => To. Unlike >>, this is safe even if From is a Choice[], a LitSeq[] or an Option[_] Quite slow, slower than nodalExtract
- Inherited from:
- FHIRObject
- Inherited from:
- Utils
- Inherited from:
- Utils
Compares the receiver object (this
) with the argument object (that
) for equivalence.
Compares the receiver object (this
) with the argument object (that
) for equivalence.
Any implementation of this method should be an equivalence relation:
- It is reflexive: for any instance
x
of typeAny
,x.equals(x)
should returntrue
. - It is symmetric: for any instances
x
andy
of typeAny
,x.equals(y)
should returntrue
if and only ify.equals(x)
returnstrue
. - It is transitive: for any instances
x
,y
, andz
of typeAny
ifx.equals(y)
returnstrue
andy.equals(z)
returnstrue
, thenx.equals(z)
should returntrue
.
If you override this method, you should verify that your implementation remains an equivalence relation.
Additionally, when overriding this method it is usually necessary to override hashCode
to ensure that
objects which are "equal" (o1.equals(o2)
returns true
) hash to the same scala.Int.
(o1.hashCode.equals(o2.hashCode)
).
- Value parameters:
- that
the object to compare against this object for equality.
- Returns:
true
if the receiver object is equivalent to the argument;false
otherwise.- Definition Classes
- FHIRObject -> Any
- Inherited from:
- FHIRObject
Calculate a hash code value for the object.
Calculate a hash code value for the object.
The default hashing algorithm is platform dependent.
Note that it is allowed for two objects to have identical hash codes (o1.hashCode.equals(o2.hashCode)
) yet
not be equal (o1.equals(o2)
returns false
). A degenerate implementation could always return 0
.
However, it is required that if two objects are equal (o1.equals(o2)
returns true
) that they have
identical hash codes (o1.hashCode.equals(o2.hashCode)
). Therefore, when overriding this method, be sure
to verify that the behavior is consistent with the equals
method.
- Returns:
the hash code value for this object.
- Definition Classes
- FHIRObject -> Any
- Inherited from:
- FHIRObject
- Inherited from:
- FHIRObject
- Inherited from:
- FHIRObject
Convenience alias for nodalGetByClass andThen map to LitSeq[To] using fn: From => To.
Convenience alias for nodalGetByClass andThen map to LitSeq[To] using fn: From => To.
- Inherited from:
- FHIRObject
Extract values of type From Unlike nodalMap, this is safe even if From is a Choice[_], a LitSeq[_] or an Option[_], however there remains a caveat with 'subtyped' types (eg PositiveInt), in that we can't differentiate them from the parent class Quite slow but faster than ^^
Extract values of type From Unlike nodalMap, this is safe even if From is a Choice[_], a LitSeq[_] or an Option[_], however there remains a caveat with 'subtyped' types (eg PositiveInt), in that we can't differentiate them from the parent class Quite slow but faster than ^^
- Inherited from:
- FHIRObject
Bit faster than >>
, but still much slower than using update$foo
when possible. If you must use it, then:
Bit faster than >>
, but still much slower than using update$foo
when possible. If you must use it, then:
T
should not be a Choice[_], a LitSeq[_], an Option[_], or any 'subtyped' type (eg PositiveInt). You should ensure, if T is a supertype of multiple valid choice values (e.g. T =:= Object), that the return value of fn retains the same type as the input value.
- Inherited from:
- FHIRObject
- Inherited from:
- FHIRObject
Returns a string representation of the object.
Returns a string representation of the object.
The default representation is platform dependent.
- Returns:
a string representation of the object.
- Definition Classes
- FHIRObject -> Any
- Inherited from:
- FHIRObject
- Inherited from:
- FHIRObject
- Inherited from:
- FHIRObject
- Inherited from:
- FHIRObject
- Inherited from:
- FHIRObject