Package com.powsybl.iidm.network

Interface Summary

Interface	Description
Battery	A battery system.
BatteryAdder	To create a battery, from a VoltageLevel instance call the VoltageLevel.newBattery() method to get a battery builder instance.
Branch<I extends Branch<I>>	An equipment with two terminals.
Branch.Overload	Represents a current overload on a Branch.
BranchAdder<T extends BranchAdder>
Bus	A bus is a set of equipments connected together through a closed switch.
BusAdder
BusbarSection	A busbar section, a non impedant element used in a node/breaker substation topology to connect equipments.
BusbarSectionAdder
Component	A set of connected bus in the network.
Connectable<I extends Connectable<I>>	An equipment that is part of a substation topology.
Container<I extends Identifiable<I>>
CurrentLimits	Current limits are defined by: A permanent limit (A) Any number of temporary limits.
CurrentLimits.TemporaryLimit	Temporary current limit.
CurrentLimitsAdder
CurrentLimitsAdder.TemporaryLimitAdder
DanglingLine	A dangling line to model boundaries (X nodes).
DanglingLine.Generation
DanglingLineAdder	To create a dangling line, from a VoltageLevel instance call the VoltageLevel.newDanglingLine() method to get a dangling line builder instance.
DanglingLineAdder.GenerationAdder
Generator	A power generator.
GeneratorAdder	To create a generator, from a VoltageLevel instance call the VoltageLevel.newGenerator() method to get a generator builder instance.
HvdcConverterStation<T extends HvdcConverterStation<T>>	HVDC converter station.
HvdcConverterStationAdder<T extends HvdcConverterStationAdder>	HVDC converter station builder and adder.
HvdcLine	A HVDC line connected to two HVDC converters on DC side.
HvdcLineAdder	HVDC line builder and adder.
Identifiable<I extends Identifiable<I>>	An object that is part of the network model and that is identified uniquely by a String id.
IdentifiableAdder<T extends IdentifiableAdder>
Injection<I extends Injection<I>>	A equipment with one terminal.
InjectionAdder<T extends InjectionAdder>
LccConverterStation	LCC converter station.
LccConverterStationAdder	LCC converter station builder and adder.
LccFilter	Harmonic filter.
LccFilterAdder
Line	An AC line.
LineAdder	To create a new AC line, from a Network instance call the Network.newLine() method to get a line builder instance.
LineCharacteristics<T>
Load	A constant power load (fixed p0 and q0).
LoadAdder	To create a load, from a VoltageLevel instance call the VoltageLevel.newLoad() method to get a load builder instance.
MinMaxReactiveLimits	Generator reactive limits that does not depend of the active power.
MinMaxReactiveLimitsAdder
Network	A power network model.
Network.BusBreakerView	A global bus/breaker view of the network.
Network.BusView	A global bus view of the network.
Network.PrettyNetworkFactory	Just being able to name method create et not createNetwork.
NetworkFactory
NetworkFactoryService
NetworkListener
PhaseTapChanger	A phase tap changer that is associated to a transformer to control the phase.
PhaseTapChangerAdder
PhaseTapChangerAdder.StepAdder
PhaseTapChangerHolder
PhaseTapChangerStep
RatioTapChanger	A ratio tap changer that is associated to a transformer to control the voltage.
RatioTapChangerAdder
RatioTapChangerAdder.StepAdder
RatioTapChangerHolder
RatioTapChangerStep
ReactiveCapabilityCurve	A reactive capability curve to define reactive limits of a Generator or Battery that depends of the active power.
ReactiveCapabilityCurve.Point	A point of the reactive capability curve, for a given active power the minimal and the maximal value for the reactive power.
ReactiveCapabilityCurveAdder
ReactiveCapabilityCurveAdder.PointAdder
ReactiveLimits	Base class for Generator reactive limits.
ReactiveLimitsHolder
ShuntCompensator	A shunt compensator.
ShuntCompensatorAdder	To create a shunt compensator, from a VoltageLevel instance call the VoltageLevel.newShuntCompensator() method to get a shunt compensator builder instance.
ShuntCompensatorLinearModel
ShuntCompensatorLinearModelAdder
ShuntCompensatorModel
ShuntCompensatorNonLinearModel
ShuntCompensatorNonLinearModel.Section
ShuntCompensatorNonLinearModelAdder
ShuntCompensatorNonLinearModelAdder.SectionAdder
StaticVarCompensator	Static VAR compensator model.
StaticVarCompensatorAdder
Substation	A substation is a collection of equipments located at a the same geographical site.
SubstationAdder	To create a substation, from a Network instance call the Network.newSubstation() method to get a substation builder instance.
Switch	A switch to connect equipments in a substation.
TapChanger<C extends TapChanger<C,S>,S extends TapChangerStep<S>>
TapChangerStep<S extends TapChangerStep>
Terminal	An equipment connection point in a substation topology.
Terminal.BusBreakerView	A bus/breaker view of the terminal.
Terminal.BusView	A bus view of the terminal.
Terminal.NodeBreakerView	A node/breaker view of the terminal.
ThreeWindingsTransformer	A Three Windings Power Transformer.
ThreeWindingsTransformer.Leg	Transformer leg Characteristics Attribute Type Unit Required Defaut value Description Id String - yes - Unique identifier of the transformer Name String - yes - Human-readable name of the transformer Terminal Terminal - yes - The terminal the leg is connected to R double Ω yes - The nominal series resistance specified at the voltage of the leg X double Ω yes - The nominal series reactance specified at the voltage of the leg G double S yes - The nominal magnetizing conductance specified at the voltage of the leg B double S yes - The nominal magnetizing susceptance specified at the voltage of the leg RatedU double kV yes - The rated voltage RatedS double MVA yes - The normal apparent power ThreeWindingsTransformerAdder ThreeWindingsTransformerAdder.LegAdder TieLine A tie line is an AC line sharing power between two neighbouring regional grids. TieLine.HalfLine Half line Characteristics Attribute Type Unit Required Defaut value Description Id String - yes - Unique identifier of the half line Name String - yes - Human-readable name of the half line R double Ω yes - The series resistance X double Ω yes - The series reactance G1 double S yes - The first side shunt conductance B1 double S yes - The first side shunt susceptance G2 double S yes - The second side shunt conductance B2 double S yes - The second side shunt susceptance XNodeP double MW yes - The active power consumption XNodeQ double MVar yes - The reactive power consumption TieLineAdder TopologyVisitor TwoWindingsTransformer A two windings power transformer. TwoWindingsTransformerAdder Validable VariantManager This class provides methods to manage variants of the network (create and remove a variant, set the working variant, etc). VoltageLevel A voltage level is a collection of equipments located in the same substation and at the same base voltage. VoltageLevel.BusBreakerView A bus/breaker view of the topology. VoltageLevel.BusBreakerView.SwitchAdder VoltageLevel.BusView A bus view of the substation topology. VoltageLevel.NodeBreakerView A node/breaker view of the topology. VoltageLevel.NodeBreakerView.InternalConnection VoltageLevel.NodeBreakerView.InternalConnectionAdder VoltageLevel.NodeBreakerView.SwitchAdder VoltageLevel.NodeBreakerView.Traverser VoltageLevel.TopologyTraverser Topology traversal handler VoltageLevelAdder VscConverterStation VSC converter station. VscConverterStationAdder VSC converter station builder and adder. Class Summary Class Description AbstractEquipmentTopologyVisitor AbstractTerminalTopologyVisitor ComponentConstants DefaultNetworkListener DefaultTopologyVisitor Equipments Equipments.ConnectionInfo EquipmentTopologyVisitor Use AbstractEquipmentTopologyVisitor instead NetworkFactoryConstants TerminalTopologyVisitor Use AbstractTerminalTopologyVisitor instead ValidationUtil VariantManagerConstants Enum Summary Enum Description Branch.Side ChangeType ConnectableType ContainerType Country Countries alpha-2 code. EnergySource The energy source of a generator. HvdcConverterStation.HvdcType HDVC type: VSC or LCC HvdcLine.ConvertersMode Converters mode used to known the sign of the active power of the HVDC line. HvdcLine.Side LoadType PhaseTapChanger.RegulationMode ReactiveLimitsKind ShuntCompensatorModelType StaticVarCompensator.RegulationMode SwitchKind The kind of switch. ThreeWindingsTransformer.Side TopologyKind The kind of topology. TopologyLevel The level of topology. Exception Summary Exception Description ValidationException Skip navigation links Overview Package Class Use Tree Deprecated Index Help Prev Package Next Package Frames No Frames All Classes Copyright © 2020. All rights reserved.