com.tencentcloudapi.tke.v20180525.models

Class ClusterAdvancedSettings

java.lang.Object

com.tencentcloudapi.common.AbstractModel

com.tencentcloudapi.tke.v20180525.models.ClusterAdvancedSettings

public class ClusterAdvancedSettings
extends AbstractModel

Constructor Summary

Constructors

Constructor and Description
ClusterAdvancedSettings()
ClusterAdvancedSettings(ClusterAdvancedSettings source) NOTE: Any ambiguous key set via .set("AnyKey", "value") will be a shallow copy, and any explicit key, i.e Foo, set via .setFoo("value") will be a deep copy.

Method Summary

Modifier and Type	Method and Description
Boolean	getAsEnabled() Get Whether auto-scaling is enabled for nodes in the cluster (Enabling this function is not supported when you create a cluster)
Boolean	getAuditEnabled() Get Indicates whether to enable auditing
String	getAuditLogsetId() Get Specifies the ID of logset to which the audit logs are uploaded.
String	getAuditLogTopicId() Get Specifies the ID of topic to which the audit logs are uploaded.
Long	getBasePodNumber() Get The basic number of Pods in custom mode
String	getCiliumMode() Get Specifies whether to enable Cilium.
String	getContainerRuntime() Get Type of runtime component used by the cluster.
Boolean	getDeletionProtection() Get Indicates whether to enable cluster deletion protection.
Boolean	getEnableCustomizedPodCIDR() Get Indicates whether to enable the custom mode for the node’s pod CIDR range
ClusterExtraArgs	getExtraArgs() Get Cluster custom parameter
Boolean	getIPVS() Get Whether IPVS is enabled
Boolean	getIsDualStack() Get Whether it is a dual-stack cluster in VPC-CNI mode.
Boolean	getIsNonStaticIpMode() Get Whether a cluster in VPC-CNI mode uses dynamic IP addresses.
String	getKubeProxyMode() Get Cluster network proxy model, which is only used when ipvs-bpf mode is used.
String	getNetworkType() Get Cluster network type, which can be GR (Global Router) or VPC-CNI.
String	getNodeNameType() Get NodeName type for a node in a cluster (This includes the two forms of **hostname** and **lan-ip**, with the default as **lan-ip**.
Boolean	getQGPUShareEnable() Get Whether to enable qGPU Sharing
String	getRuntimeVersion() Get Runtime version
String	getVpcCniType() Get Specifies the ENI type.
void	setAsEnabled(Boolean AsEnabled) Set Whether auto-scaling is enabled for nodes in the cluster (Enabling this function is not supported when you create a cluster)
void	setAuditEnabled(Boolean AuditEnabled) Set Indicates whether to enable auditing
void	setAuditLogsetId(String AuditLogsetId) Set Specifies the ID of logset to which the audit logs are uploaded.
void	setAuditLogTopicId(String AuditLogTopicId) Set Specifies the ID of topic to which the audit logs are uploaded.
void	setBasePodNumber(Long BasePodNumber) Set The basic number of Pods in custom mode
void	setCiliumMode(String CiliumMode) Set Specifies whether to enable Cilium.
void	setContainerRuntime(String ContainerRuntime) Set Type of runtime component used by the cluster.
void	setDeletionProtection(Boolean DeletionProtection) Set Indicates whether to enable cluster deletion protection.
void	setEnableCustomizedPodCIDR(Boolean EnableCustomizedPodCIDR) Set Indicates whether to enable the custom mode for the node’s pod CIDR range
void	setExtraArgs(ClusterExtraArgs ExtraArgs) Set Cluster custom parameter
void	setIPVS(Boolean IPVS) Set Whether IPVS is enabled
void	setIsDualStack(Boolean IsDualStack) Set Whether it is a dual-stack cluster in VPC-CNI mode.
void	setIsNonStaticIpMode(Boolean IsNonStaticIpMode) Set Whether a cluster in VPC-CNI mode uses dynamic IP addresses.
void	setKubeProxyMode(String KubeProxyMode) Set Cluster network proxy model, which is only used when ipvs-bpf mode is used.
void	setNetworkType(String NetworkType) Set Cluster network type, which can be GR (Global Router) or VPC-CNI.
void	setNodeNameType(String NodeNameType) Set NodeName type for a node in a cluster (This includes the two forms of **hostname** and **lan-ip**, with the default as **lan-ip**.
void	setQGPUShareEnable(Boolean QGPUShareEnable) Set Whether to enable qGPU Sharing
void	setRuntimeVersion(String RuntimeVersion) Set Runtime version
void	setVpcCniType(String VpcCniType) Set Specifies the ENI type.
void	toMap(HashMap<String,String> map, String prefix) Internal implementation, normal users should not use it.

Methods inherited from class com.tencentcloudapi.common.AbstractModel

any, fromJsonString, getBinaryParams, getMultipartRequestParams, set, setParamArrayObj, setParamArraySimple, setParamObj, setParamSimple, toJsonString

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

ClusterAdvancedSettings

public ClusterAdvancedSettings()

ClusterAdvancedSettings

public ClusterAdvancedSettings(ClusterAdvancedSettings source)

NOTE: Any ambiguous key set via .set("AnyKey", "value") will be a shallow copy, and any explicit key, i.e Foo, set via .setFoo("value") will be a deep copy.

Method Detail

getIPVS

public Boolean getIPVS()

Get Whether IPVS is enabled

Returns:

IPVS Whether IPVS is enabled

setIPVS

public void setIPVS(Boolean IPVS)

Set Whether IPVS is enabled

Parameters:

IPVS - Whether IPVS is enabled

getAsEnabled

public Boolean getAsEnabled()

Get Whether auto-scaling is enabled for nodes in the cluster (Enabling this function is not supported when you create a cluster)

Returns:

AsEnabled Whether auto-scaling is enabled for nodes in the cluster (Enabling this function is not supported when you create a cluster)

setAsEnabled

public void setAsEnabled(Boolean AsEnabled)

Set Whether auto-scaling is enabled for nodes in the cluster (Enabling this function is not supported when you create a cluster)

Parameters:

AsEnabled - Whether auto-scaling is enabled for nodes in the cluster (Enabling this function is not supported when you create a cluster)

getContainerRuntime

public String getContainerRuntime()

Get Type of runtime component used by the cluster. The types include "docker" and "containerd". Default value: docker

Returns:

ContainerRuntime Type of runtime component used by the cluster. The types include "docker" and "containerd". Default value: docker

setContainerRuntime

public void setContainerRuntime(String ContainerRuntime)

Set Type of runtime component used by the cluster. The types include "docker" and "containerd". Default value: docker

Parameters:

ContainerRuntime - Type of runtime component used by the cluster. The types include "docker" and "containerd". Default value: docker

getNodeNameType

public String getNodeNameType()

Get NodeName type for a node in a cluster (This includes the two forms of **hostname** and **lan-ip**, with the default as **lan-ip**. If **hostname** is used, you need to set the HostName parameter when creating a node, and the InstanceName needs to be the same as the HostName.)

Returns:

NodeNameType NodeName type for a node in a cluster (This includes the two forms of **hostname** and **lan-ip**, with the default as **lan-ip**. If **hostname** is used, you need to set the HostName parameter when creating a node, and the InstanceName needs to be the same as the HostName.)

setNodeNameType

public void setNodeNameType(String NodeNameType)

Set NodeName type for a node in a cluster (This includes the two forms of **hostname** and **lan-ip**, with the default as **lan-ip**. If **hostname** is used, you need to set the HostName parameter when creating a node, and the InstanceName needs to be the same as the HostName.)

Parameters:

NodeNameType - NodeName type for a node in a cluster (This includes the two forms of **hostname** and **lan-ip**, with the default as **lan-ip**. If **hostname** is used, you need to set the HostName parameter when creating a node, and the InstanceName needs to be the same as the HostName.)

getExtraArgs

public ClusterExtraArgs getExtraArgs()

Get Cluster custom parameter

Returns:

ExtraArgs Cluster custom parameter

setExtraArgs

public void setExtraArgs(ClusterExtraArgs ExtraArgs)

Set Cluster custom parameter

Parameters:

ExtraArgs - Cluster custom parameter

getNetworkType

public String getNetworkType()

Get Cluster network type, which can be GR (Global Router) or VPC-CNI. The default value is GR.

Returns:

NetworkType Cluster network type, which can be GR (Global Router) or VPC-CNI. The default value is GR.

setNetworkType

public void setNetworkType(String NetworkType)

Set Cluster network type, which can be GR (Global Router) or VPC-CNI. The default value is GR.

Parameters:

NetworkType - Cluster network type, which can be GR (Global Router) or VPC-CNI. The default value is GR.

getIsNonStaticIpMode

public Boolean getIsNonStaticIpMode()

Get Whether a cluster in VPC-CNI mode uses dynamic IP addresses. The default value is FALSE, which indicates that static IP addresses are used.

Returns:

IsNonStaticIpMode Whether a cluster in VPC-CNI mode uses dynamic IP addresses. The default value is FALSE, which indicates that static IP addresses are used.

setIsNonStaticIpMode

public void setIsNonStaticIpMode(Boolean IsNonStaticIpMode)

Set Whether a cluster in VPC-CNI mode uses dynamic IP addresses. The default value is FALSE, which indicates that static IP addresses are used.

Parameters:

IsNonStaticIpMode - Whether a cluster in VPC-CNI mode uses dynamic IP addresses. The default value is FALSE, which indicates that static IP addresses are used.

getDeletionProtection

public Boolean getDeletionProtection()

Get Indicates whether to enable cluster deletion protection.

Returns:

DeletionProtection Indicates whether to enable cluster deletion protection.

setDeletionProtection

public void setDeletionProtection(Boolean DeletionProtection)

Set Indicates whether to enable cluster deletion protection.

Parameters:

DeletionProtection - Indicates whether to enable cluster deletion protection.

getKubeProxyMode

public String getKubeProxyMode()

Get Cluster network proxy model, which is only used when ipvs-bpf mode is used. At present, TKE cluster supports three network proxy modes including `iptables`, `ipvs` and `ipvs-bpf` and their parameter setting relationships are as follows: `iptables`: do not set IPVS and KubeProxyMode. `ipvs`: set IPVS to `true` and do not set KubeProxyMode. `ipvs-bpf`: set KubeProxyMode to `kube-proxy-bpf`. The following conditions are required to use ipvs-bpf network mode: 1. The cluster version must be v1.14 or later. 2. The system image must be Tencent Linux 2.4.

Returns:

KubeProxyMode Cluster network proxy model, which is only used when ipvs-bpf mode is used. At present, TKE cluster supports three network proxy modes including `iptables`, `ipvs` and `ipvs-bpf` and their parameter setting relationships are as follows: `iptables`: do not set IPVS and KubeProxyMode. `ipvs`: set IPVS to `true` and do not set KubeProxyMode. `ipvs-bpf`: set KubeProxyMode to `kube-proxy-bpf`. The following conditions are required to use ipvs-bpf network mode: 1. The cluster version must be v1.14 or later. 2. The system image must be Tencent Linux 2.4.

setKubeProxyMode

public void setKubeProxyMode(String KubeProxyMode)

Set Cluster network proxy model, which is only used when ipvs-bpf mode is used. At present, TKE cluster supports three network proxy modes including `iptables`, `ipvs` and `ipvs-bpf` and their parameter setting relationships are as follows: `iptables`: do not set IPVS and KubeProxyMode. `ipvs`: set IPVS to `true` and do not set KubeProxyMode. `ipvs-bpf`: set KubeProxyMode to `kube-proxy-bpf`. The following conditions are required to use ipvs-bpf network mode: 1. The cluster version must be v1.14 or later. 2. The system image must be Tencent Linux 2.4.

Parameters:

KubeProxyMode - Cluster network proxy model, which is only used when ipvs-bpf mode is used. At present, TKE cluster supports three network proxy modes including `iptables`, `ipvs` and `ipvs-bpf` and their parameter setting relationships are as follows: `iptables`: do not set IPVS and KubeProxyMode. `ipvs`: set IPVS to `true` and do not set KubeProxyMode. `ipvs-bpf`: set KubeProxyMode to `kube-proxy-bpf`. The following conditions are required to use ipvs-bpf network mode: 1. The cluster version must be v1.14 or later. 2. The system image must be Tencent Linux 2.4.

getAuditEnabled

public Boolean getAuditEnabled()

Get Indicates whether to enable auditing

Returns:

AuditEnabled Indicates whether to enable auditing

setAuditEnabled

public void setAuditEnabled(Boolean AuditEnabled)

Set Indicates whether to enable auditing

Parameters:

AuditEnabled - Indicates whether to enable auditing

getAuditLogsetId

public String getAuditLogsetId()

Get Specifies the ID of logset to which the audit logs are uploaded.

Returns:

AuditLogsetId Specifies the ID of logset to which the audit logs are uploaded.

setAuditLogsetId

public void setAuditLogsetId(String AuditLogsetId)

Set Specifies the ID of logset to which the audit logs are uploaded.

Parameters:

AuditLogsetId - Specifies the ID of logset to which the audit logs are uploaded.

getAuditLogTopicId

public String getAuditLogTopicId()

Get Specifies the ID of topic to which the audit logs are uploaded.

Returns:

AuditLogTopicId Specifies the ID of topic to which the audit logs are uploaded.

setAuditLogTopicId

public void setAuditLogTopicId(String AuditLogTopicId)

Set Specifies the ID of topic to which the audit logs are uploaded.

Parameters:

AuditLogTopicId - Specifies the ID of topic to which the audit logs are uploaded.

getVpcCniType

public String getVpcCniType()

Get Specifies the ENI type. Values: `tke-route-eni` (multi-IP shared ENI); `tke-direct-eni` (independent ENI). It defaults to `tke-route-eni`.

Returns:

VpcCniType Specifies the ENI type. Values: `tke-route-eni` (multi-IP shared ENI); `tke-direct-eni` (independent ENI). It defaults to `tke-route-eni`.

setVpcCniType

public void setVpcCniType(String VpcCniType)

Set Specifies the ENI type. Values: `tke-route-eni` (multi-IP shared ENI); `tke-direct-eni` (independent ENI). It defaults to `tke-route-eni`.

Parameters:

VpcCniType - Specifies the ENI type. Values: `tke-route-eni` (multi-IP shared ENI); `tke-direct-eni` (independent ENI). It defaults to `tke-route-eni`.

getRuntimeVersion

public String getRuntimeVersion()

Get Runtime version

Returns:

RuntimeVersion Runtime version

setRuntimeVersion

public void setRuntimeVersion(String RuntimeVersion)

Set Runtime version

Parameters:

RuntimeVersion - Runtime version

getEnableCustomizedPodCIDR

public Boolean getEnableCustomizedPodCIDR()

Get Indicates whether to enable the custom mode for the node’s pod CIDR range

Returns:

EnableCustomizedPodCIDR Indicates whether to enable the custom mode for the node’s pod CIDR range

setEnableCustomizedPodCIDR

public void setEnableCustomizedPodCIDR(Boolean EnableCustomizedPodCIDR)

Set Indicates whether to enable the custom mode for the node’s pod CIDR range

Parameters:

EnableCustomizedPodCIDR - Indicates whether to enable the custom mode for the node’s pod CIDR range

getBasePodNumber

public Long getBasePodNumber()

Get The basic number of Pods in custom mode

Returns:

BasePodNumber The basic number of Pods in custom mode

setBasePodNumber

public void setBasePodNumber(Long BasePodNumber)

Set The basic number of Pods in custom mode

Parameters:

BasePodNumber - The basic number of Pods in custom mode

getCiliumMode

public String getCiliumMode()

Get Specifies whether to enable Cilium. If it’s left empty, Cilium is not enabled. If `clusterIP` is passed in, it means to enable Cilium to support the clusterIP service type.

Returns:

CiliumMode Specifies whether to enable Cilium. If it’s left empty, Cilium is not enabled. If `clusterIP` is passed in, it means to enable Cilium to support the clusterIP service type.

setCiliumMode

public void setCiliumMode(String CiliumMode)

Set Specifies whether to enable Cilium. If it’s left empty, Cilium is not enabled. If `clusterIP` is passed in, it means to enable Cilium to support the clusterIP service type.

Parameters:

CiliumMode - Specifies whether to enable Cilium. If it’s left empty, Cilium is not enabled. If `clusterIP` is passed in, it means to enable Cilium to support the clusterIP service type.

getIsDualStack

public Boolean getIsDualStack()

Get Whether it is a dual-stack cluster in VPC-CNI mode. Default value: `false`, which indicates it is not a dual-stack cluster.

Returns:

IsDualStack Whether it is a dual-stack cluster in VPC-CNI mode. Default value: `false`, which indicates it is not a dual-stack cluster.

setIsDualStack

public void setIsDualStack(Boolean IsDualStack)

Set Whether it is a dual-stack cluster in VPC-CNI mode. Default value: `false`, which indicates it is not a dual-stack cluster.

Parameters:

IsDualStack - Whether it is a dual-stack cluster in VPC-CNI mode. Default value: `false`, which indicates it is not a dual-stack cluster.

getQGPUShareEnable

public Boolean getQGPUShareEnable()

Get Whether to enable qGPU Sharing

Returns:

QGPUShareEnable Whether to enable qGPU Sharing

setQGPUShareEnable

public void setQGPUShareEnable(Boolean QGPUShareEnable)

Set Whether to enable qGPU Sharing

Parameters:

QGPUShareEnable - Whether to enable qGPU Sharing

toMap

public void toMap(HashMap<String,String> map,
                  String prefix)

Internal implementation, normal users should not use it.

Specified by:

toMap in class AbstractModel