com.tencentcloudapi.vpc.v20170312.models

Class CheckNetDetectStateRequest

java.lang.Object

com.tencentcloudapi.common.AbstractModel

com.tencentcloudapi.vpc.v20170312.models.CheckNetDetectStateRequest

public class CheckNetDetectStateRequest
extends AbstractModel

Constructor Summary

Constructors

Constructor and Description
CheckNetDetectStateRequest()
CheckNetDetectStateRequest(CheckNetDetectStateRequest source) NOTE: Any ambiguous key set via .set("AnyKey", "value") will be a shallow copy, and any explicit key, i.e Foo, set via .setFoo("value") will be a deep copy.

Method Summary

Modifier and Type	Method and Description
String[]	getDetectDestinationIp() Get The array of detection destination IPv4 addresses, which contains at most two IP addresses.
String	getNetDetectId() Get ID of a network inspector instance, e.g.
String	getNetDetectName() Get The name of a network inspector, up to 60 bytes in length.
String	getNextHopDestination() Get The next-hop destination gateway.
String	getNextHopType() Get The type of the next hop.
String	getSubnetId() Get ID of a subnet instance, e.g.
String	getVpcId() Get ID of a `VPC` instance, e.g.
void	setDetectDestinationIp(String[] DetectDestinationIp) Set The array of detection destination IPv4 addresses, which contains at most two IP addresses.
void	setNetDetectId(String NetDetectId) Set ID of a network inspector instance, e.g.
void	setNetDetectName(String NetDetectName) Set The name of a network inspector, up to 60 bytes in length.
void	setNextHopDestination(String NextHopDestination) Set The next-hop destination gateway.
void	setNextHopType(String NextHopType) Set The type of the next hop.
void	setSubnetId(String SubnetId) Set ID of a subnet instance, e.g.
void	setVpcId(String VpcId) Set ID of a `VPC` instance, e.g.
void	toMap(HashMap<String,String> map, String prefix) Internal implementation, normal users should not use it.

Methods inherited from class com.tencentcloudapi.common.AbstractModel

any, fromJsonString, getBinaryParams, getMultipartRequestParams, set, setParamArrayObj, setParamArraySimple, setParamObj, setParamSimple, toJsonString

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

CheckNetDetectStateRequest

public CheckNetDetectStateRequest()

CheckNetDetectStateRequest

public CheckNetDetectStateRequest(CheckNetDetectStateRequest source)

NOTE: Any ambiguous key set via .set("AnyKey", "value") will be a shallow copy, and any explicit key, i.e Foo, set via .setFoo("value") will be a deep copy.

Method Detail

getDetectDestinationIp

public String[] getDetectDestinationIp()

Get The array of detection destination IPv4 addresses, which contains at most two IP addresses.

Returns:

DetectDestinationIp The array of detection destination IPv4 addresses, which contains at most two IP addresses.

setDetectDestinationIp

public void setDetectDestinationIp(String[] DetectDestinationIp)

Set The array of detection destination IPv4 addresses, which contains at most two IP addresses.

Parameters:

DetectDestinationIp - The array of detection destination IPv4 addresses, which contains at most two IP addresses.

getNextHopType

public String getNextHopType()

Get The type of the next hop. Currently supported types are: VPN: VPN gateway; DIRECTCONNECT: direct connect gateway; PEERCONNECTION: peering connection; NAT: NAT gateway; NORMAL_CVM: normal CVM.

Returns:

NextHopType The type of the next hop. Currently supported types are: VPN: VPN gateway; DIRECTCONNECT: direct connect gateway; PEERCONNECTION: peering connection; NAT: NAT gateway; NORMAL_CVM: normal CVM.

setNextHopType

public void setNextHopType(String NextHopType)

Set The type of the next hop. Currently supported types are: VPN: VPN gateway; DIRECTCONNECT: direct connect gateway; PEERCONNECTION: peering connection; NAT: NAT gateway; NORMAL_CVM: normal CVM.

Parameters:

NextHopType - The type of the next hop. Currently supported types are: VPN: VPN gateway; DIRECTCONNECT: direct connect gateway; PEERCONNECTION: peering connection; NAT: NAT gateway; NORMAL_CVM: normal CVM.

getNextHopDestination

public String getNextHopDestination()

Get The next-hop destination gateway. The value is related to NextHopType. If NextHopType is set to VPN, the value of this parameter is the VPN gateway ID, such as vpngw-12345678. If NextHopType is set to DIRECTCONNECT, the value of this parameter is the direct connect gateway ID, such as dcg-12345678. If NextHopType is set to PEERCONNECTION, the value of this parameter is the peering connection ID, such as pcx-12345678. If NextHopType is set to NAT, the value of this parameter is the NAT gateway ID, such as nat-12345678. If NextHopType is set to NORMAL_CVM, the value of this parameter is the IPv4 address of the CVM, such as 10.0.0.12.

Returns:

NextHopDestination The next-hop destination gateway. The value is related to NextHopType. If NextHopType is set to VPN, the value of this parameter is the VPN gateway ID, such as vpngw-12345678. If NextHopType is set to DIRECTCONNECT, the value of this parameter is the direct connect gateway ID, such as dcg-12345678. If NextHopType is set to PEERCONNECTION, the value of this parameter is the peering connection ID, such as pcx-12345678. If NextHopType is set to NAT, the value of this parameter is the NAT gateway ID, such as nat-12345678. If NextHopType is set to NORMAL_CVM, the value of this parameter is the IPv4 address of the CVM, such as 10.0.0.12.

setNextHopDestination

public void setNextHopDestination(String NextHopDestination)

Set The next-hop destination gateway. The value is related to NextHopType. If NextHopType is set to VPN, the value of this parameter is the VPN gateway ID, such as vpngw-12345678. If NextHopType is set to DIRECTCONNECT, the value of this parameter is the direct connect gateway ID, such as dcg-12345678. If NextHopType is set to PEERCONNECTION, the value of this parameter is the peering connection ID, such as pcx-12345678. If NextHopType is set to NAT, the value of this parameter is the NAT gateway ID, such as nat-12345678. If NextHopType is set to NORMAL_CVM, the value of this parameter is the IPv4 address of the CVM, such as 10.0.0.12.

Parameters:

NextHopDestination - The next-hop destination gateway. The value is related to NextHopType. If NextHopType is set to VPN, the value of this parameter is the VPN gateway ID, such as vpngw-12345678. If NextHopType is set to DIRECTCONNECT, the value of this parameter is the direct connect gateway ID, such as dcg-12345678. If NextHopType is set to PEERCONNECTION, the value of this parameter is the peering connection ID, such as pcx-12345678. If NextHopType is set to NAT, the value of this parameter is the NAT gateway ID, such as nat-12345678. If NextHopType is set to NORMAL_CVM, the value of this parameter is the IPv4 address of the CVM, such as 10.0.0.12.

getNetDetectId

public String getNetDetectId()

Get ID of a network inspector instance, e.g. netd-12345678. Enter at least one of this parameter, VpcId, SubnetId, and NetDetectName. Use NetDetectId if it is present.

Returns:

NetDetectId ID of a network inspector instance, e.g. netd-12345678. Enter at least one of this parameter, VpcId, SubnetId, and NetDetectName. Use NetDetectId if it is present.

setNetDetectId

public void setNetDetectId(String NetDetectId)

Set ID of a network inspector instance, e.g. netd-12345678. Enter at least one of this parameter, VpcId, SubnetId, and NetDetectName. Use NetDetectId if it is present.

Parameters:

NetDetectId - ID of a network inspector instance, e.g. netd-12345678. Enter at least one of this parameter, VpcId, SubnetId, and NetDetectName. Use NetDetectId if it is present.

getVpcId

public String getVpcId()

Get ID of a `VPC` instance, e.g. `vpc-12345678`, which is used together with SubnetId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

Returns:

VpcId ID of a `VPC` instance, e.g. `vpc-12345678`, which is used together with SubnetId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

setVpcId

public void setVpcId(String VpcId)

Set ID of a `VPC` instance, e.g. `vpc-12345678`, which is used together with SubnetId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

Parameters:

VpcId - ID of a `VPC` instance, e.g. `vpc-12345678`, which is used together with SubnetId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

getSubnetId

public String getSubnetId()

Get ID of a subnet instance, e.g. `subnet-12345678`, which is used together with VpcId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

Returns:

SubnetId ID of a subnet instance, e.g. `subnet-12345678`, which is used together with VpcId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

setSubnetId

public void setSubnetId(String SubnetId)

Set ID of a subnet instance, e.g. `subnet-12345678`, which is used together with VpcId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

Parameters:

SubnetId - ID of a subnet instance, e.g. `subnet-12345678`, which is used together with VpcId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

getNetDetectName

public String getNetDetectName()

Get The name of a network inspector, up to 60 bytes in length. It is used together with VpcId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

Returns:

NetDetectName The name of a network inspector, up to 60 bytes in length. It is used together with VpcId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

setNetDetectName

public void setNetDetectName(String NetDetectName)

Set The name of a network inspector, up to 60 bytes in length. It is used together with VpcId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

Parameters:

NetDetectName - The name of a network inspector, up to 60 bytes in length. It is used together with VpcId and NetDetectName. You should enter either this parameter or NetDetectId, or both. Use NetDetectId if it is present.

toMap

public void toMap(HashMap<String,String> map,
                  String prefix)

Internal implementation, normal users should not use it.

Specified by:

toMap in class AbstractModel