Package com.google.protobuf

Class DescriptorProtos.SourceCodeInfo.Location.Builder

    • Method Detail

      • getDescriptor

        public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

      • internalGetFieldAccessorTable

        protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
        Specified by:
        internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessageV3.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>

      • getDescriptorForType

        public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
        Specified by:
        getDescriptorForType in interface com.google.protobuf.Message.Builder
        Specified by:
        getDescriptorForType in interface com.google.protobuf.MessageOrBuilder
        Overrides:
        getDescriptorForType in class com.google.protobuf.GeneratedMessageV3.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>

      • getDefaultInstanceForType

        public DescriptorProtos.SourceCodeInfo.Location getDefaultInstanceForType()
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder

      • build

        public DescriptorProtos.SourceCodeInfo.Location build()
        Specified by:
        build in interface com.google.protobuf.Message.Builder
        Specified by:
        build in interface com.google.protobuf.MessageLite.Builder

      • buildPartial

        public DescriptorProtos.SourceCodeInfo.Location buildPartial()
        Specified by:
        buildPartial in interface com.google.protobuf.Message.Builder
        Specified by:
        buildPartial in interface com.google.protobuf.MessageLite.Builder

      • isInitialized

        public final boolean isInitialized()
        Specified by:
        isInitialized in interface com.google.protobuf.MessageLiteOrBuilder
        Overrides:
        isInitialized in class com.google.protobuf.GeneratedMessageV3.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>

      • mergeFrom

        public DescriptorProtos.SourceCodeInfo.Location.Builder mergeFrom​(com.google.protobuf.CodedInputStream input,
                                                                  com.google.protobuf.ExtensionRegistryLite extensionRegistry)
                                                           throws java.io.IOException
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Specified by:
        mergeFrom in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<DescriptorProtos.SourceCodeInfo.Location.Builder>
        Throws:
        java.io.IOException

      • getPathList

        public java.util.List<java.lang.Integer> getPathList()
         Identifies which part of the FileDescriptorProto was defined at this
 location.

 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition occurs.
 For example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;

 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).
        repeated int32 path = 1 [packed = true];
        Specified by:
        getPathList in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder
        Returns:
        A list containing the path.

      • getPathCount

        public int getPathCount()
         Identifies which part of the FileDescriptorProto was defined at this
 location.

 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition occurs.
 For example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;

 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).
        repeated int32 path = 1 [packed = true];
        Specified by:
        getPathCount in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder
        Returns:
        The count of path.

      • getPath

        public int getPath​(int index)
         Identifies which part of the FileDescriptorProto was defined at this
 location.

 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition occurs.
 For example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;

 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).
        repeated int32 path = 1 [packed = true];
        Specified by:
        getPath in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder
        Parameters:
        index - The index of the element to return.
        Returns:
        The path at the given index.

      • setPath

        public DescriptorProtos.SourceCodeInfo.Location.Builder setPath​(int index,
                                                                int value)
         Identifies which part of the FileDescriptorProto was defined at this
 location.

 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition occurs.
 For example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;

 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).
        repeated int32 path = 1 [packed = true];
        Parameters:
        index - The index to set the value at.
        value - The path to set.
        Returns:
        This builder for chaining.

      • addPath

        public DescriptorProtos.SourceCodeInfo.Location.Builder addPath​(int value)
         Identifies which part of the FileDescriptorProto was defined at this
 location.

 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition occurs.
 For example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;

 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).
        repeated int32 path = 1 [packed = true];
        Parameters:
        value - The path to add.
        Returns:
        This builder for chaining.

      • addAllPath

        public DescriptorProtos.SourceCodeInfo.Location.Builder addAllPath​(java.lang.Iterable<? extends java.lang.Integer> values)
         Identifies which part of the FileDescriptorProto was defined at this
 location.

 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition occurs.
 For example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;

 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).
        repeated int32 path = 1 [packed = true];
        Parameters:
        values - The path to add.
        Returns:
        This builder for chaining.

      • clearPath

        public DescriptorProtos.SourceCodeInfo.Location.Builder clearPath()
         Identifies which part of the FileDescriptorProto was defined at this
 location.

 Each element is a field number or an index.  They form a path from
 the root FileDescriptorProto to the place where the definition occurs.
 For example, this path:
   [ 4, 3, 2, 7, 1 ]
 refers to:
   file.message_type(3)  // 4, 3
       .field(7)         // 2, 7
       .name()           // 1
 This is because FileDescriptorProto.message_type has field number 4:
   repeated DescriptorProto message_type = 4;
 and DescriptorProto.field has field number 2:
   repeated FieldDescriptorProto field = 2;
 and FieldDescriptorProto.name has field number 1:
   optional string name = 1;

 Thus, the above path gives the location of a field name.  If we removed
 the last element:
   [ 4, 3, 2, 7 ]
 this path refers to the whole field declaration (from the beginning
 of the label to the terminating semicolon).
        repeated int32 path = 1 [packed = true];
        Returns:
        This builder for chaining.

      • getSpanList

        public java.util.List<java.lang.Integer> getSpanList()
         Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.
        repeated int32 span = 2 [packed = true];
        Specified by:
        getSpanList in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder
        Returns:
        A list containing the span.

      • getSpanCount

        public int getSpanCount()
         Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.
        repeated int32 span = 2 [packed = true];
        Specified by:
        getSpanCount in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder
        Returns:
        The count of span.

      • getSpan

        public int getSpan​(int index)
         Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.
        repeated int32 span = 2 [packed = true];
        Specified by:
        getSpan in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder
        Parameters:
        index - The index of the element to return.
        Returns:
        The span at the given index.

      • setSpan

        public DescriptorProtos.SourceCodeInfo.Location.Builder setSpan​(int index,
                                                                int value)
         Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.
        repeated int32 span = 2 [packed = true];
        Parameters:
        index - The index to set the value at.
        value - The span to set.
        Returns:
        This builder for chaining.

      • addSpan

        public DescriptorProtos.SourceCodeInfo.Location.Builder addSpan​(int value)
         Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.
        repeated int32 span = 2 [packed = true];
        Parameters:
        value - The span to add.
        Returns:
        This builder for chaining.

      • addAllSpan

        public DescriptorProtos.SourceCodeInfo.Location.Builder addAllSpan​(java.lang.Iterable<? extends java.lang.Integer> values)
         Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.
        repeated int32 span = 2 [packed = true];
        Parameters:
        values - The span to add.
        Returns:
        This builder for chaining.

      • clearSpan

        public DescriptorProtos.SourceCodeInfo.Location.Builder clearSpan()
         Always has exactly three or four elements: start line, start column,
 end line (optional, otherwise assumed same as start line), end column.
 These are packed into a single field for efficiency.  Note that line
 and column numbers are zero-based -- typically you will want to add
 1 to each before displaying to a user.
        repeated int32 span = 2 [packed = true];
        Returns:
        This builder for chaining.

      • hasLeadingComments

        public boolean hasLeadingComments()
         If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.

 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.

 leading_detached_comments will keep paragraphs of comments that appear
 before (but not connected to) the current element. Each paragraph,
 separated by empty lines, will be one comment element in the repeated
 field.

 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.

 Examples:

   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;

   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.

   // Comment attached to moo.
   //
   // Another line attached to moo.
   optional double moo = 4;

   // Detached comment for corge. This is not leading or trailing comments
   // to moo or corge because there are blank lines separating it from
   // both.

   // Detached comment for corge paragraph 2.

   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;

   // ignored detached comments.
        optional string leading_comments = 3;
        Specified by:
        hasLeadingComments in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder
        Returns:
        Whether the leadingComments field is set.

      • getLeadingComments

        public java.lang.String getLeadingComments()
         If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.

 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.

 leading_detached_comments will keep paragraphs of comments that appear
 before (but not connected to) the current element. Each paragraph,
 separated by empty lines, will be one comment element in the repeated
 field.

 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.

 Examples:

   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;

   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.

   // Comment attached to moo.
   //
   // Another line attached to moo.
   optional double moo = 4;

   // Detached comment for corge. This is not leading or trailing comments
   // to moo or corge because there are blank lines separating it from
   // both.

   // Detached comment for corge paragraph 2.

   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;

   // ignored detached comments.
        optional string leading_comments = 3;
        Specified by:
        getLeadingComments in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder
        Returns:
        The leadingComments.

      • getLeadingCommentsBytes

        public com.google.protobuf.ByteString getLeadingCommentsBytes()
         If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.

 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.

 leading_detached_comments will keep paragraphs of comments that appear
 before (but not connected to) the current element. Each paragraph,
 separated by empty lines, will be one comment element in the repeated
 field.

 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.

 Examples:

   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;

   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.

   // Comment attached to moo.
   //
   // Another line attached to moo.
   optional double moo = 4;

   // Detached comment for corge. This is not leading or trailing comments
   // to moo or corge because there are blank lines separating it from
   // both.

   // Detached comment for corge paragraph 2.

   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;

   // ignored detached comments.
        optional string leading_comments = 3;
        Specified by:
        getLeadingCommentsBytes in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder
        Returns:
        The bytes for leadingComments.

      • setLeadingComments

        public DescriptorProtos.SourceCodeInfo.Location.Builder setLeadingComments​(java.lang.String value)
         If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.

 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.

 leading_detached_comments will keep paragraphs of comments that appear
 before (but not connected to) the current element. Each paragraph,
 separated by empty lines, will be one comment element in the repeated
 field.

 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.

 Examples:

   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;

   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.

   // Comment attached to moo.
   //
   // Another line attached to moo.
   optional double moo = 4;

   // Detached comment for corge. This is not leading or trailing comments
   // to moo or corge because there are blank lines separating it from
   // both.

   // Detached comment for corge paragraph 2.

   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;

   // ignored detached comments.
        optional string leading_comments = 3;
        Parameters:
        value - The leadingComments to set.
        Returns:
        This builder for chaining.

      • clearLeadingComments

        public DescriptorProtos.SourceCodeInfo.Location.Builder clearLeadingComments()
         If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.

 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.

 leading_detached_comments will keep paragraphs of comments that appear
 before (but not connected to) the current element. Each paragraph,
 separated by empty lines, will be one comment element in the repeated
 field.

 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.

 Examples:

   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;

   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.

   // Comment attached to moo.
   //
   // Another line attached to moo.
   optional double moo = 4;

   // Detached comment for corge. This is not leading or trailing comments
   // to moo or corge because there are blank lines separating it from
   // both.

   // Detached comment for corge paragraph 2.

   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;

   // ignored detached comments.
        optional string leading_comments = 3;
        Returns:
        This builder for chaining.

      • setLeadingCommentsBytes

        public DescriptorProtos.SourceCodeInfo.Location.Builder setLeadingCommentsBytes​(com.google.protobuf.ByteString value)
         If this SourceCodeInfo represents a complete declaration, these are any
 comments appearing before and after the declaration which appear to be
 attached to the declaration.

 A series of line comments appearing on consecutive lines, with no other
 tokens appearing on those lines, will be treated as a single comment.

 leading_detached_comments will keep paragraphs of comments that appear
 before (but not connected to) the current element. Each paragraph,
 separated by empty lines, will be one comment element in the repeated
 field.

 Only the comment content is provided; comment markers (e.g. //) are
 stripped out.  For block comments, leading whitespace and an asterisk
 will be stripped from the beginning of each line other than the first.
 Newlines are included in the output.

 Examples:

   optional int32 foo = 1;  // Comment attached to foo.
   // Comment attached to bar.
   optional int32 bar = 2;

   optional string baz = 3;
   // Comment attached to baz.
   // Another line attached to baz.

   // Comment attached to moo.
   //
   // Another line attached to moo.
   optional double moo = 4;

   // Detached comment for corge. This is not leading or trailing comments
   // to moo or corge because there are blank lines separating it from
   // both.

   // Detached comment for corge paragraph 2.

   optional string corge = 5;
   /* Block comment attached
    * to corge.  Leading asterisks
    * will be removed. */
   /* Block comment attached to
    * grault. */
   optional int32 grault = 6;

   // ignored detached comments.
        optional string leading_comments = 3;
        Parameters:
        value - The bytes for leadingComments to set.
        Returns:
        This builder for chaining.

      • setTrailingComments

        public DescriptorProtos.SourceCodeInfo.Location.Builder setTrailingComments​(java.lang.String value)
        optional string trailing_comments = 4;
        Parameters:
        value - The trailingComments to set.
        Returns:
        This builder for chaining.

      • setTrailingCommentsBytes

        public DescriptorProtos.SourceCodeInfo.Location.Builder setTrailingCommentsBytes​(com.google.protobuf.ByteString value)
        optional string trailing_comments = 4;
        Parameters:
        value - The bytes for trailingComments to set.
        Returns:
        This builder for chaining.

      • getLeadingDetachedCommentsBytes

        public com.google.protobuf.ByteString getLeadingDetachedCommentsBytes​(int index)
        repeated string leading_detached_comments = 6;
        Specified by:
        getLeadingDetachedCommentsBytes in interface DescriptorProtos.SourceCodeInfo.LocationOrBuilder
        Parameters:
        index - The index of the value to return.
        Returns:
        The bytes of the leadingDetachedComments at the given index.

      • setLeadingDetachedComments

        public DescriptorProtos.SourceCodeInfo.Location.Builder setLeadingDetachedComments​(int index,
                                                                                   java.lang.String value)
        repeated string leading_detached_comments = 6;
        Parameters:
        index - The index to set the value at.
        value - The leadingDetachedComments to set.
        Returns:
        This builder for chaining.

      • addLeadingDetachedComments

        public DescriptorProtos.SourceCodeInfo.Location.Builder addLeadingDetachedComments​(java.lang.String value)
        repeated string leading_detached_comments = 6;
        Parameters:
        value - The leadingDetachedComments to add.
        Returns:
        This builder for chaining.

      • addAllLeadingDetachedComments

        public DescriptorProtos.SourceCodeInfo.Location.Builder addAllLeadingDetachedComments​(java.lang.Iterable<java.lang.String> values)
        repeated string leading_detached_comments = 6;
        Parameters:
        values - The leadingDetachedComments to add.
        Returns:
        This builder for chaining.

      • addLeadingDetachedCommentsBytes

        public DescriptorProtos.SourceCodeInfo.Location.Builder addLeadingDetachedCommentsBytes​(com.google.protobuf.ByteString value)
        repeated string leading_detached_comments = 6;
        Parameters:
        value - The bytes of the leadingDetachedComments to add.
        Returns:
        This builder for chaining.