public final class Cluster extends com.google.protobuf.GeneratedMessageV3 implements ClusterOrBuilder
Configuration for a single upstream cluster. [#next-free-field: 53]Protobuf type
envoy.config.cluster.v4alpha.Cluster
Modifier and Type | Class and Description |
---|---|
static class |
Cluster.Builder
Configuration for a single upstream cluster.
|
static class |
Cluster.ClusterDiscoveryTypeCase |
static class |
Cluster.ClusterProtocolSelection
Protobuf enum
envoy.config.cluster.v4alpha.Cluster.ClusterProtocolSelection |
static class |
Cluster.CommonLbConfig
Common configuration for all load balancer implementations.
|
static interface |
Cluster.CommonLbConfigOrBuilder |
static class |
Cluster.CustomClusterType
Extended cluster type.
|
static interface |
Cluster.CustomClusterTypeOrBuilder |
static class |
Cluster.DiscoveryType
Refer to :ref:`service discovery type <arch_overview_service_discovery_types>`
for an explanation on each type.
|
static class |
Cluster.DnsLookupFamily
When V4_ONLY is selected, the DNS resolver will only perform a lookup for
addresses in the IPv4 family.
|
static class |
Cluster.EdsClusterConfig
Only valid when discovery type is EDS.
|
static interface |
Cluster.EdsClusterConfigOrBuilder |
static class |
Cluster.LbConfigCase |
static class |
Cluster.LbPolicy
Refer to :ref:`load balancer type <arch_overview_load_balancing_types>` architecture
overview section for information on each type.
|
static class |
Cluster.LbSubsetConfig
Optionally divide the endpoints in this cluster into subsets defined by
endpoint metadata and selected by route and weighted cluster metadata.
|
static interface |
Cluster.LbSubsetConfigOrBuilder |
static class |
Cluster.LeastRequestLbConfig
Specific configuration for the LeastRequest load balancing policy.
|
static interface |
Cluster.LeastRequestLbConfigOrBuilder |
static class |
Cluster.MaglevLbConfig
Specific configuration for the :ref:`Maglev<arch_overview_load_balancing_types_maglev>`
load balancing policy.
|
static interface |
Cluster.MaglevLbConfigOrBuilder |
static class |
Cluster.OriginalDstLbConfig
Specific configuration for the
:ref:`Original Destination <arch_overview_load_balancing_types_original_destination>`
load balancing policy.
|
static interface |
Cluster.OriginalDstLbConfigOrBuilder |
static class |
Cluster.PreconnectPolicy
[#not-implemented-hide:]
Protobuf type
envoy.config.cluster.v4alpha.Cluster.PreconnectPolicy |
static interface |
Cluster.PreconnectPolicyOrBuilder |
static class |
Cluster.RefreshRate
Protobuf type
envoy.config.cluster.v4alpha.Cluster.RefreshRate |
static interface |
Cluster.RefreshRateOrBuilder |
static class |
Cluster.RingHashLbConfig
Specific configuration for the :ref:`RingHash<arch_overview_load_balancing_types_ring_hash>`
load balancing policy.
|
static interface |
Cluster.RingHashLbConfigOrBuilder |
static class |
Cluster.TransportSocketMatch
TransportSocketMatch specifies what transport socket config will be used
when the match conditions are satisfied.
|
static interface |
Cluster.TransportSocketMatchOrBuilder |
com.google.protobuf.GeneratedMessageV3.BuilderParent, com.google.protobuf.GeneratedMessageV3.ExtendableBuilder<MessageType extends com.google.protobuf.GeneratedMessageV3.ExtendableMessage,BuilderType extends com.google.protobuf.GeneratedMessageV3.ExtendableBuilder<MessageType,BuilderType>>, com.google.protobuf.GeneratedMessageV3.ExtendableMessage<MessageType extends com.google.protobuf.GeneratedMessageV3.ExtendableMessage>, com.google.protobuf.GeneratedMessageV3.ExtendableMessageOrBuilder<MessageType extends com.google.protobuf.GeneratedMessageV3.ExtendableMessage>, com.google.protobuf.GeneratedMessageV3.FieldAccessorTable, com.google.protobuf.GeneratedMessageV3.UnusedPrivateParameter
Modifier and Type | Method and Description |
---|---|
boolean |
containsTypedExtensionProtocolOptions(String key)
The extension_protocol_options field is used to provide extension-specific protocol options
for upstream connections.
|
boolean |
equals(Object obj) |
String |
getAltStatName()
An optional alternative to the cluster name to be used while emitting stats.
|
com.google.protobuf.ByteString |
getAltStatNameBytes()
An optional alternative to the cluster name to be used while emitting stats.
|
CircuitBreakers |
getCircuitBreakers()
Optional :ref:`circuit breaking <arch_overview_circuit_break>` for the cluster.
|
CircuitBreakersOrBuilder |
getCircuitBreakersOrBuilder()
Optional :ref:`circuit breaking <arch_overview_circuit_break>` for the cluster.
|
com.google.protobuf.Duration |
getCleanupInterval()
The interval for removing stale hosts from a cluster type
:ref:`ORIGINAL_DST<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.ORIGINAL_DST>`.
|
com.google.protobuf.DurationOrBuilder |
getCleanupIntervalOrBuilder()
The interval for removing stale hosts from a cluster type
:ref:`ORIGINAL_DST<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.ORIGINAL_DST>`.
|
boolean |
getCloseConnectionsOnHostHealthFailure()
If an upstream host becomes unhealthy (as determined by the configured health checks
or outlier detection), immediately close all connections to the failed host.
.. note::
This is currently only supported for connections created by tcp_proxy.
.. note::
The current implementation of this feature closes all connections immediately when
the unhealthy status is detected.
|
Cluster.ClusterDiscoveryTypeCase |
getClusterDiscoveryTypeCase() |
Cluster.CustomClusterType |
getClusterType()
The custom cluster type.
|
Cluster.CustomClusterTypeOrBuilder |
getClusterTypeOrBuilder()
The custom cluster type.
|
Cluster.CommonLbConfig |
getCommonLbConfig()
Common configuration for all load balancer implementations.
|
Cluster.CommonLbConfigOrBuilder |
getCommonLbConfigOrBuilder()
Common configuration for all load balancer implementations.
|
boolean |
getConnectionPoolPerDownstreamConnection()
If `connection_pool_per_downstream_connection` is true, the cluster will use a separate
connection pool for every downstream connection
bool connection_pool_per_downstream_connection = 51; |
com.google.protobuf.Duration |
getConnectTimeout()
The timeout for new network connections to hosts in the cluster.
|
com.google.protobuf.DurationOrBuilder |
getConnectTimeoutOrBuilder()
The timeout for new network connections to hosts in the cluster.
|
static Cluster |
getDefaultInstance() |
Cluster |
getDefaultInstanceForType() |
static com.google.protobuf.Descriptors.Descriptor |
getDescriptor() |
Cluster.RefreshRate |
getDnsFailureRefreshRate()
If the DNS failure refresh rate is specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this is used as the cluster’s DNS refresh rate when requests are failing.
|
Cluster.RefreshRateOrBuilder |
getDnsFailureRefreshRateOrBuilder()
If the DNS failure refresh rate is specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this is used as the cluster’s DNS refresh rate when requests are failing.
|
Cluster.DnsLookupFamily |
getDnsLookupFamily()
The DNS IP address resolution policy.
|
int |
getDnsLookupFamilyValue()
The DNS IP address resolution policy.
|
com.google.protobuf.Duration |
getDnsRefreshRate()
If the DNS refresh rate is specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this value is used as the cluster’s DNS refresh
rate.
|
com.google.protobuf.DurationOrBuilder |
getDnsRefreshRateOrBuilder()
If the DNS refresh rate is specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this value is used as the cluster’s DNS refresh
rate.
|
Address |
getDnsResolvers(int index)
If DNS resolvers are specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this value is used to specify the cluster’s dns resolvers.
|
int |
getDnsResolversCount()
If DNS resolvers are specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this value is used to specify the cluster’s dns resolvers.
|
List<Address> |
getDnsResolversList()
If DNS resolvers are specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this value is used to specify the cluster’s dns resolvers.
|
AddressOrBuilder |
getDnsResolversOrBuilder(int index)
If DNS resolvers are specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this value is used to specify the cluster’s dns resolvers.
|
List<? extends AddressOrBuilder> |
getDnsResolversOrBuilderList()
If DNS resolvers are specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this value is used to specify the cluster’s dns resolvers.
|
Cluster.EdsClusterConfig |
getEdsClusterConfig()
Configuration to use for EDS updates for the Cluster.
|
Cluster.EdsClusterConfigOrBuilder |
getEdsClusterConfigOrBuilder()
Configuration to use for EDS updates for the Cluster.
|
Filter |
getFilters(int index)
An (optional) network filter chain, listed in the order the filters should be applied.
|
int |
getFiltersCount()
An (optional) network filter chain, listed in the order the filters should be applied.
|
List<Filter> |
getFiltersList()
An (optional) network filter chain, listed in the order the filters should be applied.
|
FilterOrBuilder |
getFiltersOrBuilder(int index)
An (optional) network filter chain, listed in the order the filters should be applied.
|
List<? extends FilterOrBuilder> |
getFiltersOrBuilderList()
An (optional) network filter chain, listed in the order the filters should be applied.
|
HealthCheck |
getHealthChecks(int index)
Optional :ref:`active health checking <arch_overview_health_checking>`
configuration for the cluster.
|
int |
getHealthChecksCount()
Optional :ref:`active health checking <arch_overview_health_checking>`
configuration for the cluster.
|
List<HealthCheck> |
getHealthChecksList()
Optional :ref:`active health checking <arch_overview_health_checking>`
configuration for the cluster.
|
HealthCheckOrBuilder |
getHealthChecksOrBuilder(int index)
Optional :ref:`active health checking <arch_overview_health_checking>`
configuration for the cluster.
|
List<? extends HealthCheckOrBuilder> |
getHealthChecksOrBuilderList()
Optional :ref:`active health checking <arch_overview_health_checking>`
configuration for the cluster.
|
boolean |
getIgnoreHealthOnHostRemoval()
If set to true, Envoy will ignore the health value of a host when processing its removal
from service discovery.
|
Cluster.LbConfigCase |
getLbConfigCase() |
Cluster.LbPolicy |
getLbPolicy()
The :ref:`load balancer type <arch_overview_load_balancing_types>` to use
when picking a host in the cluster.
|
int |
getLbPolicyValue()
The :ref:`load balancer type <arch_overview_load_balancing_types>` to use
when picking a host in the cluster.
|
Cluster.LbSubsetConfig |
getLbSubsetConfig()
Configuration for load balancing subsetting.
|
Cluster.LbSubsetConfigOrBuilder |
getLbSubsetConfigOrBuilder()
Configuration for load balancing subsetting.
|
Cluster.LeastRequestLbConfig |
getLeastRequestLbConfig()
Optional configuration for the LeastRequest load balancing policy.
|
Cluster.LeastRequestLbConfigOrBuilder |
getLeastRequestLbConfigOrBuilder()
Optional configuration for the LeastRequest load balancing policy.
|
ClusterLoadAssignment |
getLoadAssignment()
Setting this is required for specifying members of
:ref:`STATIC<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STATIC>`,
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` clusters.
|
ClusterLoadAssignmentOrBuilder |
getLoadAssignmentOrBuilder()
Setting this is required for specifying members of
:ref:`STATIC<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STATIC>`,
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` clusters.
|
LoadBalancingPolicy |
getLoadBalancingPolicy()
[#not-implemented-hide:] New mechanism for LB policy configuration.
|
LoadBalancingPolicyOrBuilder |
getLoadBalancingPolicyOrBuilder()
[#not-implemented-hide:] New mechanism for LB policy configuration.
|
ConfigSource |
getLrsServer()
[#not-implemented-hide:]
If present, tells the client where to send load reports via LRS.
|
ConfigSourceOrBuilder |
getLrsServerOrBuilder()
[#not-implemented-hide:]
If present, tells the client where to send load reports via LRS.
|
Cluster.MaglevLbConfig |
getMaglevLbConfig()
Optional configuration for the Maglev load balancing policy.
|
Cluster.MaglevLbConfigOrBuilder |
getMaglevLbConfigOrBuilder()
Optional configuration for the Maglev load balancing policy.
|
com.google.protobuf.UInt32Value |
getMaxRequestsPerConnection()
Optional maximum requests for a single upstream connection.
|
com.google.protobuf.UInt32ValueOrBuilder |
getMaxRequestsPerConnectionOrBuilder()
Optional maximum requests for a single upstream connection.
|
Metadata |
getMetadata()
The Metadata field can be used to provide additional information about the
cluster.
|
MetadataOrBuilder |
getMetadataOrBuilder()
The Metadata field can be used to provide additional information about the
cluster.
|
String |
getName()
Supplies the name of the cluster which must be unique across all clusters.
|
com.google.protobuf.ByteString |
getNameBytes()
Supplies the name of the cluster which must be unique across all clusters.
|
Cluster.OriginalDstLbConfig |
getOriginalDstLbConfig()
Optional configuration for the Original Destination load balancing policy.
|
Cluster.OriginalDstLbConfigOrBuilder |
getOriginalDstLbConfigOrBuilder()
Optional configuration for the Original Destination load balancing policy.
|
OutlierDetection |
getOutlierDetection()
If specified, outlier detection will be enabled for this upstream cluster.
|
OutlierDetectionOrBuilder |
getOutlierDetectionOrBuilder()
If specified, outlier detection will be enabled for this upstream cluster.
|
com.google.protobuf.Parser<Cluster> |
getParserForType() |
com.google.protobuf.UInt32Value |
getPerConnectionBufferLimitBytes()
Soft limit on size of the cluster’s connections read and write buffers.
|
com.google.protobuf.UInt32ValueOrBuilder |
getPerConnectionBufferLimitBytesOrBuilder()
Soft limit on size of the cluster’s connections read and write buffers.
|
Cluster.PreconnectPolicy |
getPreconnectPolicy()
[#not-implemented-hide:]
Preconnect configuration for this cluster.
|
Cluster.PreconnectPolicyOrBuilder |
getPreconnectPolicyOrBuilder()
[#not-implemented-hide:]
Preconnect configuration for this cluster.
|
boolean |
getRespectDnsTtl()
Optional configuration for setting cluster's DNS refresh rate.
|
Cluster.RingHashLbConfig |
getRingHashLbConfig()
Optional configuration for the Ring Hash load balancing policy.
|
Cluster.RingHashLbConfigOrBuilder |
getRingHashLbConfigOrBuilder()
Optional configuration for the Ring Hash load balancing policy.
|
int |
getSerializedSize() |
TrackClusterStats |
getTrackClusterStats()
Configuration to track optional cluster stats.
|
TrackClusterStatsOrBuilder |
getTrackClusterStatsOrBuilder()
Configuration to track optional cluster stats.
|
TransportSocket |
getTransportSocket()
Optional custom transport socket implementation to use for upstream connections.
|
Cluster.TransportSocketMatch |
getTransportSocketMatches(int index)
Configuration to use different transport sockets for different endpoints.
|
int |
getTransportSocketMatchesCount()
Configuration to use different transport sockets for different endpoints.
|
List<Cluster.TransportSocketMatch> |
getTransportSocketMatchesList()
Configuration to use different transport sockets for different endpoints.
|
Cluster.TransportSocketMatchOrBuilder |
getTransportSocketMatchesOrBuilder(int index)
Configuration to use different transport sockets for different endpoints.
|
List<? extends Cluster.TransportSocketMatchOrBuilder> |
getTransportSocketMatchesOrBuilderList()
Configuration to use different transport sockets for different endpoints.
|
TransportSocketOrBuilder |
getTransportSocketOrBuilder()
Optional custom transport socket implementation to use for upstream connections.
|
Cluster.DiscoveryType |
getType()
The :ref:`service discovery type <arch_overview_service_discovery_types>`
to use for resolving the cluster.
|
Map<String,com.google.protobuf.Any> |
getTypedExtensionProtocolOptions()
Deprecated.
|
int |
getTypedExtensionProtocolOptionsCount()
The extension_protocol_options field is used to provide extension-specific protocol options
for upstream connections.
|
Map<String,com.google.protobuf.Any> |
getTypedExtensionProtocolOptionsMap()
The extension_protocol_options field is used to provide extension-specific protocol options
for upstream connections.
|
com.google.protobuf.Any |
getTypedExtensionProtocolOptionsOrDefault(String key,
com.google.protobuf.Any defaultValue)
The extension_protocol_options field is used to provide extension-specific protocol options
for upstream connections.
|
com.google.protobuf.Any |
getTypedExtensionProtocolOptionsOrThrow(String key)
The extension_protocol_options field is used to provide extension-specific protocol options
for upstream connections.
|
int |
getTypeValue()
The :ref:`service discovery type <arch_overview_service_discovery_types>`
to use for resolving the cluster.
|
com.google.protobuf.UnknownFieldSet |
getUnknownFields() |
BindConfig |
getUpstreamBindConfig()
Optional configuration used to bind newly established upstream connections.
|
BindConfigOrBuilder |
getUpstreamBindConfigOrBuilder()
Optional configuration used to bind newly established upstream connections.
|
TypedExtensionConfig |
getUpstreamConfig()
Optional customization and configuration of upstream connection pool, and upstream type.
|
TypedExtensionConfigOrBuilder |
getUpstreamConfigOrBuilder()
Optional customization and configuration of upstream connection pool, and upstream type.
|
UpstreamConnectionOptions |
getUpstreamConnectionOptions()
Optional options for upstream connections.
|
UpstreamConnectionOptionsOrBuilder |
getUpstreamConnectionOptionsOrBuilder()
Optional options for upstream connections.
|
boolean |
getUseTcpForDnsLookups()
[#next-major-version: Reconcile DNS options in a single message.]
|
boolean |
hasCircuitBreakers()
Optional :ref:`circuit breaking <arch_overview_circuit_break>` for the cluster.
|
boolean |
hasCleanupInterval()
The interval for removing stale hosts from a cluster type
:ref:`ORIGINAL_DST<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.ORIGINAL_DST>`.
|
boolean |
hasClusterType()
The custom cluster type.
|
boolean |
hasCommonLbConfig()
Common configuration for all load balancer implementations.
|
boolean |
hasConnectTimeout()
The timeout for new network connections to hosts in the cluster.
|
boolean |
hasDnsFailureRefreshRate()
If the DNS failure refresh rate is specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this is used as the cluster’s DNS refresh rate when requests are failing.
|
boolean |
hasDnsRefreshRate()
If the DNS refresh rate is specified and the cluster type is either
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`,
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`,
this value is used as the cluster’s DNS refresh
rate.
|
boolean |
hasEdsClusterConfig()
Configuration to use for EDS updates for the Cluster.
|
int |
hashCode() |
boolean |
hasLbSubsetConfig()
Configuration for load balancing subsetting.
|
boolean |
hasLeastRequestLbConfig()
Optional configuration for the LeastRequest load balancing policy.
|
boolean |
hasLoadAssignment()
Setting this is required for specifying members of
:ref:`STATIC<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STATIC>`,
:ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`
or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` clusters.
|
boolean |
hasLoadBalancingPolicy()
[#not-implemented-hide:] New mechanism for LB policy configuration.
|
boolean |
hasLrsServer()
[#not-implemented-hide:]
If present, tells the client where to send load reports via LRS.
|
boolean |
hasMaglevLbConfig()
Optional configuration for the Maglev load balancing policy.
|
boolean |
hasMaxRequestsPerConnection()
Optional maximum requests for a single upstream connection.
|
boolean |
hasMetadata()
The Metadata field can be used to provide additional information about the
cluster.
|
boolean |
hasOriginalDstLbConfig()
Optional configuration for the Original Destination load balancing policy.
|
boolean |
hasOutlierDetection()
If specified, outlier detection will be enabled for this upstream cluster.
|
boolean |
hasPerConnectionBufferLimitBytes()
Soft limit on size of the cluster’s connections read and write buffers.
|
boolean |
hasPreconnectPolicy()
[#not-implemented-hide:]
Preconnect configuration for this cluster.
|
boolean |
hasRingHashLbConfig()
Optional configuration for the Ring Hash load balancing policy.
|
boolean |
hasTrackClusterStats()
Configuration to track optional cluster stats.
|
boolean |
hasTransportSocket()
Optional custom transport socket implementation to use for upstream connections.
|
boolean |
hasUpstreamBindConfig()
Optional configuration used to bind newly established upstream connections.
|
boolean |
hasUpstreamConfig()
Optional customization and configuration of upstream connection pool, and upstream type.
|
boolean |
hasUpstreamConnectionOptions()
Optional options for upstream connections.
|
protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable |
internalGetFieldAccessorTable() |
protected com.google.protobuf.MapField |
internalGetMapField(int number) |
boolean |
isInitialized() |
static Cluster.Builder |
newBuilder() |
static Cluster.Builder |
newBuilder(Cluster prototype) |
Cluster.Builder |
newBuilderForType() |
protected Cluster.Builder |
newBuilderForType(com.google.protobuf.GeneratedMessageV3.BuilderParent parent) |
protected Object |
newInstance(com.google.protobuf.GeneratedMessageV3.UnusedPrivateParameter unused) |
static Cluster |
parseDelimitedFrom(InputStream input) |
static Cluster |
parseDelimitedFrom(InputStream input,
com.google.protobuf.ExtensionRegistryLite extensionRegistry) |
static Cluster |
parseFrom(byte[] data) |
static Cluster |
parseFrom(byte[] data,
com.google.protobuf.ExtensionRegistryLite extensionRegistry) |
static Cluster |
parseFrom(ByteBuffer data) |
static Cluster |
parseFrom(ByteBuffer data,
com.google.protobuf.ExtensionRegistryLite extensionRegistry) |
static Cluster |
parseFrom(com.google.protobuf.ByteString data) |
static Cluster |
parseFrom(com.google.protobuf.ByteString data,
com.google.protobuf.ExtensionRegistryLite extensionRegistry) |
static Cluster |
parseFrom(com.google.protobuf.CodedInputStream input) |
static Cluster |
parseFrom(com.google.protobuf.CodedInputStream input,
com.google.protobuf.ExtensionRegistryLite extensionRegistry) |
static Cluster |
parseFrom(InputStream input) |
static Cluster |
parseFrom(InputStream input,
com.google.protobuf.ExtensionRegistryLite extensionRegistry) |
static com.google.protobuf.Parser<Cluster> |
parser() |
Cluster.Builder |
toBuilder() |
void |
writeTo(com.google.protobuf.CodedOutputStream output) |
canUseUnsafe, computeStringSize, computeStringSizeNoTag, emptyBooleanList, emptyDoubleList, emptyFloatList, emptyIntList, emptyLongList, getAllFields, getDescriptorForType, getField, getOneofFieldDescriptor, getRepeatedField, getRepeatedFieldCount, hasField, hasOneof, makeExtensionsImmutable, mergeFromAndMakeImmutableInternal, mutableCopy, mutableCopy, mutableCopy, mutableCopy, mutableCopy, newBooleanList, newBuilderForType, newDoubleList, newFloatList, newIntList, newLongList, parseDelimitedWithIOException, parseDelimitedWithIOException, parseUnknownField, parseUnknownFieldProto3, parseWithIOException, parseWithIOException, parseWithIOException, parseWithIOException, serializeBooleanMapTo, serializeIntegerMapTo, serializeLongMapTo, serializeStringMapTo, writeReplace, writeString, writeStringNoTag
findInitializationErrors, getInitializationErrorString, hashBoolean, hashEnum, hashEnumList, hashFields, hashLong, toString
addAll, addAll, checkByteStringIsUtf8, toByteArray, toByteString, writeDelimitedTo, writeTo
clone, finalize, getClass, notify, notifyAll, wait, wait, wait
public static final int TRANSPORT_SOCKET_MATCHES_FIELD_NUMBER
public static final int NAME_FIELD_NUMBER
public static final int ALT_STAT_NAME_FIELD_NUMBER
public static final int TYPE_FIELD_NUMBER
public static final int CLUSTER_TYPE_FIELD_NUMBER
public static final int EDS_CLUSTER_CONFIG_FIELD_NUMBER
public static final int CONNECT_TIMEOUT_FIELD_NUMBER
public static final int PER_CONNECTION_BUFFER_LIMIT_BYTES_FIELD_NUMBER
public static final int LB_POLICY_FIELD_NUMBER
public static final int LOAD_ASSIGNMENT_FIELD_NUMBER
public static final int HEALTH_CHECKS_FIELD_NUMBER
public static final int MAX_REQUESTS_PER_CONNECTION_FIELD_NUMBER
public static final int CIRCUIT_BREAKERS_FIELD_NUMBER
public static final int TYPED_EXTENSION_PROTOCOL_OPTIONS_FIELD_NUMBER
public static final int DNS_REFRESH_RATE_FIELD_NUMBER
public static final int DNS_FAILURE_REFRESH_RATE_FIELD_NUMBER
public static final int RESPECT_DNS_TTL_FIELD_NUMBER
public static final int DNS_LOOKUP_FAMILY_FIELD_NUMBER
public static final int DNS_RESOLVERS_FIELD_NUMBER
public static final int USE_TCP_FOR_DNS_LOOKUPS_FIELD_NUMBER
public static final int OUTLIER_DETECTION_FIELD_NUMBER
public static final int CLEANUP_INTERVAL_FIELD_NUMBER
public static final int UPSTREAM_BIND_CONFIG_FIELD_NUMBER
public static final int LB_SUBSET_CONFIG_FIELD_NUMBER
public static final int RING_HASH_LB_CONFIG_FIELD_NUMBER
public static final int MAGLEV_LB_CONFIG_FIELD_NUMBER
public static final int ORIGINAL_DST_LB_CONFIG_FIELD_NUMBER
public static final int LEAST_REQUEST_LB_CONFIG_FIELD_NUMBER
public static final int COMMON_LB_CONFIG_FIELD_NUMBER
public static final int TRANSPORT_SOCKET_FIELD_NUMBER
public static final int METADATA_FIELD_NUMBER
public static final int UPSTREAM_CONNECTION_OPTIONS_FIELD_NUMBER
public static final int CLOSE_CONNECTIONS_ON_HOST_HEALTH_FAILURE_FIELD_NUMBER
public static final int IGNORE_HEALTH_ON_HOST_REMOVAL_FIELD_NUMBER
public static final int FILTERS_FIELD_NUMBER
public static final int LOAD_BALANCING_POLICY_FIELD_NUMBER
public static final int LRS_SERVER_FIELD_NUMBER
public static final int UPSTREAM_CONFIG_FIELD_NUMBER
public static final int TRACK_CLUSTER_STATS_FIELD_NUMBER
public static final int PRECONNECT_POLICY_FIELD_NUMBER
public static final int CONNECTION_POOL_PER_DOWNSTREAM_CONNECTION_FIELD_NUMBER
protected Object newInstance(com.google.protobuf.GeneratedMessageV3.UnusedPrivateParameter unused)
newInstance
in class com.google.protobuf.GeneratedMessageV3
public final com.google.protobuf.UnknownFieldSet getUnknownFields()
getUnknownFields
in interface com.google.protobuf.MessageOrBuilder
getUnknownFields
in class com.google.protobuf.GeneratedMessageV3
public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()
protected com.google.protobuf.MapField internalGetMapField(int number)
internalGetMapField
in class com.google.protobuf.GeneratedMessageV3
protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
internalGetFieldAccessorTable
in class com.google.protobuf.GeneratedMessageV3
public Cluster.ClusterDiscoveryTypeCase getClusterDiscoveryTypeCase()
getClusterDiscoveryTypeCase
in interface ClusterOrBuilder
public Cluster.LbConfigCase getLbConfigCase()
getLbConfigCase
in interface ClusterOrBuilder
public List<Cluster.TransportSocketMatch> getTransportSocketMatchesList()
Configuration to use different transport sockets for different endpoints. The entry of *envoy.transport_socket_match* in the :ref:`LbEndpoint.Metadata <envoy_api_field_config.endpoint.v3.LbEndpoint.metadata>` is used to match against the transport sockets as they appear in the list. The first :ref:`match <envoy_api_msg_config.cluster.v4alpha.Cluster.TransportSocketMatch>` is used. For example, with the following match .. code-block:: yaml transport_socket_matches: - name: "enableMTLS" match: acceptMTLS: true transport_socket: name: envoy.transport_sockets.tls config: { ... } # tls socket configuration - name: "defaultToPlaintext" match: {} transport_socket: name: envoy.transport_sockets.raw_buffer Connections to the endpoints whose metadata value under *envoy.transport_socket_match* having "acceptMTLS"/"true" key/value pair use the "enableMTLS" socket configuration. If a :ref:`socket match <envoy_api_msg_config.cluster.v4alpha.Cluster.TransportSocketMatch>` with empty match criteria is provided, that always match any endpoint. For example, the "defaultToPlaintext" socket match in case above. If an endpoint metadata's value under *envoy.transport_socket_match* does not match any *TransportSocketMatch*, socket configuration fallbacks to use the *tls_context* or *transport_socket* specified in this cluster. This field allows gradual and flexible transport socket configuration changes. The metadata of endpoints in EDS can indicate transport socket capabilities. For example, an endpoint's metadata can have two key value pairs as "acceptMTLS": "true", "acceptPlaintext": "true". While some other endpoints, only accepting plaintext traffic has "acceptPlaintext": "true" metadata information. Then the xDS server can configure the CDS to a client, Envoy A, to send mutual TLS traffic for endpoints with "acceptMTLS": "true", by adding a corresponding *TransportSocketMatch* in this field. Other client Envoys receive CDS without *transport_socket_match* set, and still send plain text traffic to the same cluster. This field can be used to specify custom transport socket configurations for health checks by adding matching key/value pairs in a health check's :ref:`transport socket match criteria <envoy_api_field_config.core.v4alpha.HealthCheck.transport_socket_match_criteria>` field. [#comment:TODO(incfly): add a detailed architecture doc on intended usage.]
repeated .envoy.config.cluster.v4alpha.Cluster.TransportSocketMatch transport_socket_matches = 43;
getTransportSocketMatchesList
in interface ClusterOrBuilder
public List<? extends Cluster.TransportSocketMatchOrBuilder> getTransportSocketMatchesOrBuilderList()
Configuration to use different transport sockets for different endpoints. The entry of *envoy.transport_socket_match* in the :ref:`LbEndpoint.Metadata <envoy_api_field_config.endpoint.v3.LbEndpoint.metadata>` is used to match against the transport sockets as they appear in the list. The first :ref:`match <envoy_api_msg_config.cluster.v4alpha.Cluster.TransportSocketMatch>` is used. For example, with the following match .. code-block:: yaml transport_socket_matches: - name: "enableMTLS" match: acceptMTLS: true transport_socket: name: envoy.transport_sockets.tls config: { ... } # tls socket configuration - name: "defaultToPlaintext" match: {} transport_socket: name: envoy.transport_sockets.raw_buffer Connections to the endpoints whose metadata value under *envoy.transport_socket_match* having "acceptMTLS"/"true" key/value pair use the "enableMTLS" socket configuration. If a :ref:`socket match <envoy_api_msg_config.cluster.v4alpha.Cluster.TransportSocketMatch>` with empty match criteria is provided, that always match any endpoint. For example, the "defaultToPlaintext" socket match in case above. If an endpoint metadata's value under *envoy.transport_socket_match* does not match any *TransportSocketMatch*, socket configuration fallbacks to use the *tls_context* or *transport_socket* specified in this cluster. This field allows gradual and flexible transport socket configuration changes. The metadata of endpoints in EDS can indicate transport socket capabilities. For example, an endpoint's metadata can have two key value pairs as "acceptMTLS": "true", "acceptPlaintext": "true". While some other endpoints, only accepting plaintext traffic has "acceptPlaintext": "true" metadata information. Then the xDS server can configure the CDS to a client, Envoy A, to send mutual TLS traffic for endpoints with "acceptMTLS": "true", by adding a corresponding *TransportSocketMatch* in this field. Other client Envoys receive CDS without *transport_socket_match* set, and still send plain text traffic to the same cluster. This field can be used to specify custom transport socket configurations for health checks by adding matching key/value pairs in a health check's :ref:`transport socket match criteria <envoy_api_field_config.core.v4alpha.HealthCheck.transport_socket_match_criteria>` field. [#comment:TODO(incfly): add a detailed architecture doc on intended usage.]
repeated .envoy.config.cluster.v4alpha.Cluster.TransportSocketMatch transport_socket_matches = 43;
getTransportSocketMatchesOrBuilderList
in interface ClusterOrBuilder
public int getTransportSocketMatchesCount()
Configuration to use different transport sockets for different endpoints. The entry of *envoy.transport_socket_match* in the :ref:`LbEndpoint.Metadata <envoy_api_field_config.endpoint.v3.LbEndpoint.metadata>` is used to match against the transport sockets as they appear in the list. The first :ref:`match <envoy_api_msg_config.cluster.v4alpha.Cluster.TransportSocketMatch>` is used. For example, with the following match .. code-block:: yaml transport_socket_matches: - name: "enableMTLS" match: acceptMTLS: true transport_socket: name: envoy.transport_sockets.tls config: { ... } # tls socket configuration - name: "defaultToPlaintext" match: {} transport_socket: name: envoy.transport_sockets.raw_buffer Connections to the endpoints whose metadata value under *envoy.transport_socket_match* having "acceptMTLS"/"true" key/value pair use the "enableMTLS" socket configuration. If a :ref:`socket match <envoy_api_msg_config.cluster.v4alpha.Cluster.TransportSocketMatch>` with empty match criteria is provided, that always match any endpoint. For example, the "defaultToPlaintext" socket match in case above. If an endpoint metadata's value under *envoy.transport_socket_match* does not match any *TransportSocketMatch*, socket configuration fallbacks to use the *tls_context* or *transport_socket* specified in this cluster. This field allows gradual and flexible transport socket configuration changes. The metadata of endpoints in EDS can indicate transport socket capabilities. For example, an endpoint's metadata can have two key value pairs as "acceptMTLS": "true", "acceptPlaintext": "true". While some other endpoints, only accepting plaintext traffic has "acceptPlaintext": "true" metadata information. Then the xDS server can configure the CDS to a client, Envoy A, to send mutual TLS traffic for endpoints with "acceptMTLS": "true", by adding a corresponding *TransportSocketMatch* in this field. Other client Envoys receive CDS without *transport_socket_match* set, and still send plain text traffic to the same cluster. This field can be used to specify custom transport socket configurations for health checks by adding matching key/value pairs in a health check's :ref:`transport socket match criteria <envoy_api_field_config.core.v4alpha.HealthCheck.transport_socket_match_criteria>` field. [#comment:TODO(incfly): add a detailed architecture doc on intended usage.]
repeated .envoy.config.cluster.v4alpha.Cluster.TransportSocketMatch transport_socket_matches = 43;
getTransportSocketMatchesCount
in interface ClusterOrBuilder
public Cluster.TransportSocketMatch getTransportSocketMatches(int index)
Configuration to use different transport sockets for different endpoints. The entry of *envoy.transport_socket_match* in the :ref:`LbEndpoint.Metadata <envoy_api_field_config.endpoint.v3.LbEndpoint.metadata>` is used to match against the transport sockets as they appear in the list. The first :ref:`match <envoy_api_msg_config.cluster.v4alpha.Cluster.TransportSocketMatch>` is used. For example, with the following match .. code-block:: yaml transport_socket_matches: - name: "enableMTLS" match: acceptMTLS: true transport_socket: name: envoy.transport_sockets.tls config: { ... } # tls socket configuration - name: "defaultToPlaintext" match: {} transport_socket: name: envoy.transport_sockets.raw_buffer Connections to the endpoints whose metadata value under *envoy.transport_socket_match* having "acceptMTLS"/"true" key/value pair use the "enableMTLS" socket configuration. If a :ref:`socket match <envoy_api_msg_config.cluster.v4alpha.Cluster.TransportSocketMatch>` with empty match criteria is provided, that always match any endpoint. For example, the "defaultToPlaintext" socket match in case above. If an endpoint metadata's value under *envoy.transport_socket_match* does not match any *TransportSocketMatch*, socket configuration fallbacks to use the *tls_context* or *transport_socket* specified in this cluster. This field allows gradual and flexible transport socket configuration changes. The metadata of endpoints in EDS can indicate transport socket capabilities. For example, an endpoint's metadata can have two key value pairs as "acceptMTLS": "true", "acceptPlaintext": "true". While some other endpoints, only accepting plaintext traffic has "acceptPlaintext": "true" metadata information. Then the xDS server can configure the CDS to a client, Envoy A, to send mutual TLS traffic for endpoints with "acceptMTLS": "true", by adding a corresponding *TransportSocketMatch* in this field. Other client Envoys receive CDS without *transport_socket_match* set, and still send plain text traffic to the same cluster. This field can be used to specify custom transport socket configurations for health checks by adding matching key/value pairs in a health check's :ref:`transport socket match criteria <envoy_api_field_config.core.v4alpha.HealthCheck.transport_socket_match_criteria>` field. [#comment:TODO(incfly): add a detailed architecture doc on intended usage.]
repeated .envoy.config.cluster.v4alpha.Cluster.TransportSocketMatch transport_socket_matches = 43;
getTransportSocketMatches
in interface ClusterOrBuilder
public Cluster.TransportSocketMatchOrBuilder getTransportSocketMatchesOrBuilder(int index)
Configuration to use different transport sockets for different endpoints. The entry of *envoy.transport_socket_match* in the :ref:`LbEndpoint.Metadata <envoy_api_field_config.endpoint.v3.LbEndpoint.metadata>` is used to match against the transport sockets as they appear in the list. The first :ref:`match <envoy_api_msg_config.cluster.v4alpha.Cluster.TransportSocketMatch>` is used. For example, with the following match .. code-block:: yaml transport_socket_matches: - name: "enableMTLS" match: acceptMTLS: true transport_socket: name: envoy.transport_sockets.tls config: { ... } # tls socket configuration - name: "defaultToPlaintext" match: {} transport_socket: name: envoy.transport_sockets.raw_buffer Connections to the endpoints whose metadata value under *envoy.transport_socket_match* having "acceptMTLS"/"true" key/value pair use the "enableMTLS" socket configuration. If a :ref:`socket match <envoy_api_msg_config.cluster.v4alpha.Cluster.TransportSocketMatch>` with empty match criteria is provided, that always match any endpoint. For example, the "defaultToPlaintext" socket match in case above. If an endpoint metadata's value under *envoy.transport_socket_match* does not match any *TransportSocketMatch*, socket configuration fallbacks to use the *tls_context* or *transport_socket* specified in this cluster. This field allows gradual and flexible transport socket configuration changes. The metadata of endpoints in EDS can indicate transport socket capabilities. For example, an endpoint's metadata can have two key value pairs as "acceptMTLS": "true", "acceptPlaintext": "true". While some other endpoints, only accepting plaintext traffic has "acceptPlaintext": "true" metadata information. Then the xDS server can configure the CDS to a client, Envoy A, to send mutual TLS traffic for endpoints with "acceptMTLS": "true", by adding a corresponding *TransportSocketMatch* in this field. Other client Envoys receive CDS without *transport_socket_match* set, and still send plain text traffic to the same cluster. This field can be used to specify custom transport socket configurations for health checks by adding matching key/value pairs in a health check's :ref:`transport socket match criteria <envoy_api_field_config.core.v4alpha.HealthCheck.transport_socket_match_criteria>` field. [#comment:TODO(incfly): add a detailed architecture doc on intended usage.]
repeated .envoy.config.cluster.v4alpha.Cluster.TransportSocketMatch transport_socket_matches = 43;
getTransportSocketMatchesOrBuilder
in interface ClusterOrBuilder
public String getName()
Supplies the name of the cluster which must be unique across all clusters. The cluster name is used when emitting :ref:`statistics <config_cluster_manager_cluster_stats>` if :ref:`alt_stat_name <envoy_api_field_config.cluster.v4alpha.Cluster.alt_stat_name>` is not provided. Any ``:`` in the cluster name will be converted to ``_`` when emitting statistics.
string name = 1 [(.validate.rules) = { ... }
getName
in interface ClusterOrBuilder
public com.google.protobuf.ByteString getNameBytes()
Supplies the name of the cluster which must be unique across all clusters. The cluster name is used when emitting :ref:`statistics <config_cluster_manager_cluster_stats>` if :ref:`alt_stat_name <envoy_api_field_config.cluster.v4alpha.Cluster.alt_stat_name>` is not provided. Any ``:`` in the cluster name will be converted to ``_`` when emitting statistics.
string name = 1 [(.validate.rules) = { ... }
getNameBytes
in interface ClusterOrBuilder
public String getAltStatName()
An optional alternative to the cluster name to be used while emitting stats. Any ``:`` in the name will be converted to ``_`` when emitting statistics. This should not be confused with :ref:`Router Filter Header <config_http_filters_router_x-envoy-upstream-alt-stat-name>`.
string alt_stat_name = 28;
getAltStatName
in interface ClusterOrBuilder
public com.google.protobuf.ByteString getAltStatNameBytes()
An optional alternative to the cluster name to be used while emitting stats. Any ``:`` in the name will be converted to ``_`` when emitting statistics. This should not be confused with :ref:`Router Filter Header <config_http_filters_router_x-envoy-upstream-alt-stat-name>`.
string alt_stat_name = 28;
getAltStatNameBytes
in interface ClusterOrBuilder
public int getTypeValue()
The :ref:`service discovery type <arch_overview_service_discovery_types>` to use for resolving the cluster.
.envoy.config.cluster.v4alpha.Cluster.DiscoveryType type = 2 [(.validate.rules) = { ... }
getTypeValue
in interface ClusterOrBuilder
public Cluster.DiscoveryType getType()
The :ref:`service discovery type <arch_overview_service_discovery_types>` to use for resolving the cluster.
.envoy.config.cluster.v4alpha.Cluster.DiscoveryType type = 2 [(.validate.rules) = { ... }
getType
in interface ClusterOrBuilder
public boolean hasClusterType()
The custom cluster type.
.envoy.config.cluster.v4alpha.Cluster.CustomClusterType cluster_type = 38;
hasClusterType
in interface ClusterOrBuilder
public Cluster.CustomClusterType getClusterType()
The custom cluster type.
.envoy.config.cluster.v4alpha.Cluster.CustomClusterType cluster_type = 38;
getClusterType
in interface ClusterOrBuilder
public Cluster.CustomClusterTypeOrBuilder getClusterTypeOrBuilder()
The custom cluster type.
.envoy.config.cluster.v4alpha.Cluster.CustomClusterType cluster_type = 38;
getClusterTypeOrBuilder
in interface ClusterOrBuilder
public boolean hasEdsClusterConfig()
Configuration to use for EDS updates for the Cluster.
.envoy.config.cluster.v4alpha.Cluster.EdsClusterConfig eds_cluster_config = 3;
hasEdsClusterConfig
in interface ClusterOrBuilder
public Cluster.EdsClusterConfig getEdsClusterConfig()
Configuration to use for EDS updates for the Cluster.
.envoy.config.cluster.v4alpha.Cluster.EdsClusterConfig eds_cluster_config = 3;
getEdsClusterConfig
in interface ClusterOrBuilder
public Cluster.EdsClusterConfigOrBuilder getEdsClusterConfigOrBuilder()
Configuration to use for EDS updates for the Cluster.
.envoy.config.cluster.v4alpha.Cluster.EdsClusterConfig eds_cluster_config = 3;
getEdsClusterConfigOrBuilder
in interface ClusterOrBuilder
public boolean hasConnectTimeout()
The timeout for new network connections to hosts in the cluster.
.google.protobuf.Duration connect_timeout = 4 [(.validate.rules) = { ... }
hasConnectTimeout
in interface ClusterOrBuilder
public com.google.protobuf.Duration getConnectTimeout()
The timeout for new network connections to hosts in the cluster.
.google.protobuf.Duration connect_timeout = 4 [(.validate.rules) = { ... }
getConnectTimeout
in interface ClusterOrBuilder
public com.google.protobuf.DurationOrBuilder getConnectTimeoutOrBuilder()
The timeout for new network connections to hosts in the cluster.
.google.protobuf.Duration connect_timeout = 4 [(.validate.rules) = { ... }
getConnectTimeoutOrBuilder
in interface ClusterOrBuilder
public boolean hasPerConnectionBufferLimitBytes()
Soft limit on size of the cluster’s connections read and write buffers. If unspecified, an implementation defined default is applied (1MiB).
.google.protobuf.UInt32Value per_connection_buffer_limit_bytes = 5 [(.udpa.annotations.security) = { ... }
hasPerConnectionBufferLimitBytes
in interface ClusterOrBuilder
public com.google.protobuf.UInt32Value getPerConnectionBufferLimitBytes()
Soft limit on size of the cluster’s connections read and write buffers. If unspecified, an implementation defined default is applied (1MiB).
.google.protobuf.UInt32Value per_connection_buffer_limit_bytes = 5 [(.udpa.annotations.security) = { ... }
getPerConnectionBufferLimitBytes
in interface ClusterOrBuilder
public com.google.protobuf.UInt32ValueOrBuilder getPerConnectionBufferLimitBytesOrBuilder()
Soft limit on size of the cluster’s connections read and write buffers. If unspecified, an implementation defined default is applied (1MiB).
.google.protobuf.UInt32Value per_connection_buffer_limit_bytes = 5 [(.udpa.annotations.security) = { ... }
getPerConnectionBufferLimitBytesOrBuilder
in interface ClusterOrBuilder
public int getLbPolicyValue()
The :ref:`load balancer type <arch_overview_load_balancing_types>` to use when picking a host in the cluster. [#comment:TODO: Remove enum constraint :ref:`LOAD_BALANCING_POLICY_CONFIG<envoy_api_enum_value_config.cluster.v4alpha.Cluster.LbPolicy.LOAD_BALANCING_POLICY_CONFIG>` when implemented.]
.envoy.config.cluster.v4alpha.Cluster.LbPolicy lb_policy = 6 [(.validate.rules) = { ... }
getLbPolicyValue
in interface ClusterOrBuilder
public Cluster.LbPolicy getLbPolicy()
The :ref:`load balancer type <arch_overview_load_balancing_types>` to use when picking a host in the cluster. [#comment:TODO: Remove enum constraint :ref:`LOAD_BALANCING_POLICY_CONFIG<envoy_api_enum_value_config.cluster.v4alpha.Cluster.LbPolicy.LOAD_BALANCING_POLICY_CONFIG>` when implemented.]
.envoy.config.cluster.v4alpha.Cluster.LbPolicy lb_policy = 6 [(.validate.rules) = { ... }
getLbPolicy
in interface ClusterOrBuilder
public boolean hasLoadAssignment()
Setting this is required for specifying members of :ref:`STATIC<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STATIC>`, :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` clusters. This field supersedes the *hosts* field in the v2 API. .. attention:: Setting this allows non-EDS cluster types to contain embedded EDS equivalent :ref:`endpoint assignments<envoy_api_msg_config.endpoint.v3.ClusterLoadAssignment>`.
.envoy.config.endpoint.v3.ClusterLoadAssignment load_assignment = 33;
hasLoadAssignment
in interface ClusterOrBuilder
public ClusterLoadAssignment getLoadAssignment()
Setting this is required for specifying members of :ref:`STATIC<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STATIC>`, :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` clusters. This field supersedes the *hosts* field in the v2 API. .. attention:: Setting this allows non-EDS cluster types to contain embedded EDS equivalent :ref:`endpoint assignments<envoy_api_msg_config.endpoint.v3.ClusterLoadAssignment>`.
.envoy.config.endpoint.v3.ClusterLoadAssignment load_assignment = 33;
getLoadAssignment
in interface ClusterOrBuilder
public ClusterLoadAssignmentOrBuilder getLoadAssignmentOrBuilder()
Setting this is required for specifying members of :ref:`STATIC<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STATIC>`, :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` clusters. This field supersedes the *hosts* field in the v2 API. .. attention:: Setting this allows non-EDS cluster types to contain embedded EDS equivalent :ref:`endpoint assignments<envoy_api_msg_config.endpoint.v3.ClusterLoadAssignment>`.
.envoy.config.endpoint.v3.ClusterLoadAssignment load_assignment = 33;
getLoadAssignmentOrBuilder
in interface ClusterOrBuilder
public List<HealthCheck> getHealthChecksList()
Optional :ref:`active health checking <arch_overview_health_checking>` configuration for the cluster. If no configuration is specified no health checking will be done and all cluster members will be considered healthy at all times.
repeated .envoy.config.core.v4alpha.HealthCheck health_checks = 8;
getHealthChecksList
in interface ClusterOrBuilder
public List<? extends HealthCheckOrBuilder> getHealthChecksOrBuilderList()
Optional :ref:`active health checking <arch_overview_health_checking>` configuration for the cluster. If no configuration is specified no health checking will be done and all cluster members will be considered healthy at all times.
repeated .envoy.config.core.v4alpha.HealthCheck health_checks = 8;
getHealthChecksOrBuilderList
in interface ClusterOrBuilder
public int getHealthChecksCount()
Optional :ref:`active health checking <arch_overview_health_checking>` configuration for the cluster. If no configuration is specified no health checking will be done and all cluster members will be considered healthy at all times.
repeated .envoy.config.core.v4alpha.HealthCheck health_checks = 8;
getHealthChecksCount
in interface ClusterOrBuilder
public HealthCheck getHealthChecks(int index)
Optional :ref:`active health checking <arch_overview_health_checking>` configuration for the cluster. If no configuration is specified no health checking will be done and all cluster members will be considered healthy at all times.
repeated .envoy.config.core.v4alpha.HealthCheck health_checks = 8;
getHealthChecks
in interface ClusterOrBuilder
public HealthCheckOrBuilder getHealthChecksOrBuilder(int index)
Optional :ref:`active health checking <arch_overview_health_checking>` configuration for the cluster. If no configuration is specified no health checking will be done and all cluster members will be considered healthy at all times.
repeated .envoy.config.core.v4alpha.HealthCheck health_checks = 8;
getHealthChecksOrBuilder
in interface ClusterOrBuilder
public boolean hasMaxRequestsPerConnection()
Optional maximum requests for a single upstream connection. This parameter is respected by both the HTTP/1.1 and HTTP/2 connection pool implementations. If not specified, there is no limit. Setting this parameter to 1 will effectively disable keep alive.
.google.protobuf.UInt32Value max_requests_per_connection = 9;
hasMaxRequestsPerConnection
in interface ClusterOrBuilder
public com.google.protobuf.UInt32Value getMaxRequestsPerConnection()
Optional maximum requests for a single upstream connection. This parameter is respected by both the HTTP/1.1 and HTTP/2 connection pool implementations. If not specified, there is no limit. Setting this parameter to 1 will effectively disable keep alive.
.google.protobuf.UInt32Value max_requests_per_connection = 9;
getMaxRequestsPerConnection
in interface ClusterOrBuilder
public com.google.protobuf.UInt32ValueOrBuilder getMaxRequestsPerConnectionOrBuilder()
Optional maximum requests for a single upstream connection. This parameter is respected by both the HTTP/1.1 and HTTP/2 connection pool implementations. If not specified, there is no limit. Setting this parameter to 1 will effectively disable keep alive.
.google.protobuf.UInt32Value max_requests_per_connection = 9;
getMaxRequestsPerConnectionOrBuilder
in interface ClusterOrBuilder
public boolean hasCircuitBreakers()
Optional :ref:`circuit breaking <arch_overview_circuit_break>` for the cluster.
.envoy.config.cluster.v4alpha.CircuitBreakers circuit_breakers = 10;
hasCircuitBreakers
in interface ClusterOrBuilder
public CircuitBreakers getCircuitBreakers()
Optional :ref:`circuit breaking <arch_overview_circuit_break>` for the cluster.
.envoy.config.cluster.v4alpha.CircuitBreakers circuit_breakers = 10;
getCircuitBreakers
in interface ClusterOrBuilder
public CircuitBreakersOrBuilder getCircuitBreakersOrBuilder()
Optional :ref:`circuit breaking <arch_overview_circuit_break>` for the cluster.
.envoy.config.cluster.v4alpha.CircuitBreakers circuit_breakers = 10;
getCircuitBreakersOrBuilder
in interface ClusterOrBuilder
public int getTypedExtensionProtocolOptionsCount()
ClusterOrBuilder
The extension_protocol_options field is used to provide extension-specific protocol options for upstream connections. The key should match the extension filter name, such as "envoy.filters.network.thrift_proxy". See the extension's documentation for details on specific options. [#next-major-version: make this a list of typed extensions.]
map<string, .google.protobuf.Any> typed_extension_protocol_options = 36;
getTypedExtensionProtocolOptionsCount
in interface ClusterOrBuilder
public boolean containsTypedExtensionProtocolOptions(String key)
The extension_protocol_options field is used to provide extension-specific protocol options for upstream connections. The key should match the extension filter name, such as "envoy.filters.network.thrift_proxy". See the extension's documentation for details on specific options. [#next-major-version: make this a list of typed extensions.]
map<string, .google.protobuf.Any> typed_extension_protocol_options = 36;
containsTypedExtensionProtocolOptions
in interface ClusterOrBuilder
@Deprecated public Map<String,com.google.protobuf.Any> getTypedExtensionProtocolOptions()
getTypedExtensionProtocolOptionsMap()
instead.getTypedExtensionProtocolOptions
in interface ClusterOrBuilder
public Map<String,com.google.protobuf.Any> getTypedExtensionProtocolOptionsMap()
The extension_protocol_options field is used to provide extension-specific protocol options for upstream connections. The key should match the extension filter name, such as "envoy.filters.network.thrift_proxy". See the extension's documentation for details on specific options. [#next-major-version: make this a list of typed extensions.]
map<string, .google.protobuf.Any> typed_extension_protocol_options = 36;
getTypedExtensionProtocolOptionsMap
in interface ClusterOrBuilder
public com.google.protobuf.Any getTypedExtensionProtocolOptionsOrDefault(String key, com.google.protobuf.Any defaultValue)
The extension_protocol_options field is used to provide extension-specific protocol options for upstream connections. The key should match the extension filter name, such as "envoy.filters.network.thrift_proxy". See the extension's documentation for details on specific options. [#next-major-version: make this a list of typed extensions.]
map<string, .google.protobuf.Any> typed_extension_protocol_options = 36;
getTypedExtensionProtocolOptionsOrDefault
in interface ClusterOrBuilder
public com.google.protobuf.Any getTypedExtensionProtocolOptionsOrThrow(String key)
The extension_protocol_options field is used to provide extension-specific protocol options for upstream connections. The key should match the extension filter name, such as "envoy.filters.network.thrift_proxy". See the extension's documentation for details on specific options. [#next-major-version: make this a list of typed extensions.]
map<string, .google.protobuf.Any> typed_extension_protocol_options = 36;
getTypedExtensionProtocolOptionsOrThrow
in interface ClusterOrBuilder
public boolean hasDnsRefreshRate()
If the DNS refresh rate is specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this value is used as the cluster’s DNS refresh rate. The value configured must be at least 1ms. If this setting is not specified, the value defaults to 5000ms. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored.
.google.protobuf.Duration dns_refresh_rate = 16 [(.validate.rules) = { ... }
hasDnsRefreshRate
in interface ClusterOrBuilder
public com.google.protobuf.Duration getDnsRefreshRate()
If the DNS refresh rate is specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this value is used as the cluster’s DNS refresh rate. The value configured must be at least 1ms. If this setting is not specified, the value defaults to 5000ms. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored.
.google.protobuf.Duration dns_refresh_rate = 16 [(.validate.rules) = { ... }
getDnsRefreshRate
in interface ClusterOrBuilder
public com.google.protobuf.DurationOrBuilder getDnsRefreshRateOrBuilder()
If the DNS refresh rate is specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this value is used as the cluster’s DNS refresh rate. The value configured must be at least 1ms. If this setting is not specified, the value defaults to 5000ms. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored.
.google.protobuf.Duration dns_refresh_rate = 16 [(.validate.rules) = { ... }
getDnsRefreshRateOrBuilder
in interface ClusterOrBuilder
public boolean hasDnsFailureRefreshRate()
If the DNS failure refresh rate is specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this is used as the cluster’s DNS refresh rate when requests are failing. If this setting is not specified, the failure refresh rate defaults to the DNS refresh rate. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored.
.envoy.config.cluster.v4alpha.Cluster.RefreshRate dns_failure_refresh_rate = 44;
hasDnsFailureRefreshRate
in interface ClusterOrBuilder
public Cluster.RefreshRate getDnsFailureRefreshRate()
If the DNS failure refresh rate is specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this is used as the cluster’s DNS refresh rate when requests are failing. If this setting is not specified, the failure refresh rate defaults to the DNS refresh rate. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored.
.envoy.config.cluster.v4alpha.Cluster.RefreshRate dns_failure_refresh_rate = 44;
getDnsFailureRefreshRate
in interface ClusterOrBuilder
public Cluster.RefreshRateOrBuilder getDnsFailureRefreshRateOrBuilder()
If the DNS failure refresh rate is specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this is used as the cluster’s DNS refresh rate when requests are failing. If this setting is not specified, the failure refresh rate defaults to the DNS refresh rate. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored.
.envoy.config.cluster.v4alpha.Cluster.RefreshRate dns_failure_refresh_rate = 44;
getDnsFailureRefreshRateOrBuilder
in interface ClusterOrBuilder
public boolean getRespectDnsTtl()
Optional configuration for setting cluster's DNS refresh rate. If the value is set to true, cluster's DNS refresh rate will be set to resource record's TTL which comes from DNS resolution.
bool respect_dns_ttl = 39;
getRespectDnsTtl
in interface ClusterOrBuilder
public int getDnsLookupFamilyValue()
The DNS IP address resolution policy. If this setting is not specified, the value defaults to :ref:`AUTO<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DnsLookupFamily.AUTO>`.
.envoy.config.cluster.v4alpha.Cluster.DnsLookupFamily dns_lookup_family = 17 [(.validate.rules) = { ... }
getDnsLookupFamilyValue
in interface ClusterOrBuilder
public Cluster.DnsLookupFamily getDnsLookupFamily()
The DNS IP address resolution policy. If this setting is not specified, the value defaults to :ref:`AUTO<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DnsLookupFamily.AUTO>`.
.envoy.config.cluster.v4alpha.Cluster.DnsLookupFamily dns_lookup_family = 17 [(.validate.rules) = { ... }
getDnsLookupFamily
in interface ClusterOrBuilder
public List<Address> getDnsResolversList()
If DNS resolvers are specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this value is used to specify the cluster’s dns resolvers. If this setting is not specified, the value defaults to the default resolver, which uses /etc/resolv.conf for configuration. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored. Setting this value causes failure if the ``envoy.restart_features.use_apple_api_for_dns_lookups`` runtime value is true during server startup. Apple's API only allows overriding DNS resolvers via system settings.
repeated .envoy.config.core.v4alpha.Address dns_resolvers = 18;
getDnsResolversList
in interface ClusterOrBuilder
public List<? extends AddressOrBuilder> getDnsResolversOrBuilderList()
If DNS resolvers are specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this value is used to specify the cluster’s dns resolvers. If this setting is not specified, the value defaults to the default resolver, which uses /etc/resolv.conf for configuration. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored. Setting this value causes failure if the ``envoy.restart_features.use_apple_api_for_dns_lookups`` runtime value is true during server startup. Apple's API only allows overriding DNS resolvers via system settings.
repeated .envoy.config.core.v4alpha.Address dns_resolvers = 18;
getDnsResolversOrBuilderList
in interface ClusterOrBuilder
public int getDnsResolversCount()
If DNS resolvers are specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this value is used to specify the cluster’s dns resolvers. If this setting is not specified, the value defaults to the default resolver, which uses /etc/resolv.conf for configuration. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored. Setting this value causes failure if the ``envoy.restart_features.use_apple_api_for_dns_lookups`` runtime value is true during server startup. Apple's API only allows overriding DNS resolvers via system settings.
repeated .envoy.config.core.v4alpha.Address dns_resolvers = 18;
getDnsResolversCount
in interface ClusterOrBuilder
public Address getDnsResolvers(int index)
If DNS resolvers are specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this value is used to specify the cluster’s dns resolvers. If this setting is not specified, the value defaults to the default resolver, which uses /etc/resolv.conf for configuration. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored. Setting this value causes failure if the ``envoy.restart_features.use_apple_api_for_dns_lookups`` runtime value is true during server startup. Apple's API only allows overriding DNS resolvers via system settings.
repeated .envoy.config.core.v4alpha.Address dns_resolvers = 18;
getDnsResolvers
in interface ClusterOrBuilder
public AddressOrBuilder getDnsResolversOrBuilder(int index)
If DNS resolvers are specified and the cluster type is either :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>`, or :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>`, this value is used to specify the cluster’s dns resolvers. If this setting is not specified, the value defaults to the default resolver, which uses /etc/resolv.conf for configuration. For cluster types other than :ref:`STRICT_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.STRICT_DNS>` and :ref:`LOGICAL_DNS<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.LOGICAL_DNS>` this setting is ignored. Setting this value causes failure if the ``envoy.restart_features.use_apple_api_for_dns_lookups`` runtime value is true during server startup. Apple's API only allows overriding DNS resolvers via system settings.
repeated .envoy.config.core.v4alpha.Address dns_resolvers = 18;
getDnsResolversOrBuilder
in interface ClusterOrBuilder
public boolean getUseTcpForDnsLookups()
[#next-major-version: Reconcile DNS options in a single message.] Always use TCP queries instead of UDP queries for DNS lookups. Setting this value causes failure if the ``envoy.restart_features.use_apple_api_for_dns_lookups`` runtime value is true during server startup. Apple' API only uses UDP for DNS resolution.
bool use_tcp_for_dns_lookups = 45;
getUseTcpForDnsLookups
in interface ClusterOrBuilder
public boolean hasOutlierDetection()
If specified, outlier detection will be enabled for this upstream cluster. Each of the configuration values can be overridden via :ref:`runtime values <config_cluster_manager_cluster_runtime_outlier_detection>`.
.envoy.config.cluster.v4alpha.OutlierDetection outlier_detection = 19;
hasOutlierDetection
in interface ClusterOrBuilder
public OutlierDetection getOutlierDetection()
If specified, outlier detection will be enabled for this upstream cluster. Each of the configuration values can be overridden via :ref:`runtime values <config_cluster_manager_cluster_runtime_outlier_detection>`.
.envoy.config.cluster.v4alpha.OutlierDetection outlier_detection = 19;
getOutlierDetection
in interface ClusterOrBuilder
public OutlierDetectionOrBuilder getOutlierDetectionOrBuilder()
If specified, outlier detection will be enabled for this upstream cluster. Each of the configuration values can be overridden via :ref:`runtime values <config_cluster_manager_cluster_runtime_outlier_detection>`.
.envoy.config.cluster.v4alpha.OutlierDetection outlier_detection = 19;
getOutlierDetectionOrBuilder
in interface ClusterOrBuilder
public boolean hasCleanupInterval()
The interval for removing stale hosts from a cluster type :ref:`ORIGINAL_DST<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.ORIGINAL_DST>`. Hosts are considered stale if they have not been used as upstream destinations during this interval. New hosts are added to original destination clusters on demand as new connections are redirected to Envoy, causing the number of hosts in the cluster to grow over time. Hosts that are not stale (they are actively used as destinations) are kept in the cluster, which allows connections to them remain open, saving the latency that would otherwise be spent on opening new connections. If this setting is not specified, the value defaults to 5000ms. For cluster types other than :ref:`ORIGINAL_DST<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.ORIGINAL_DST>` this setting is ignored.
.google.protobuf.Duration cleanup_interval = 20 [(.validate.rules) = { ... }
hasCleanupInterval
in interface ClusterOrBuilder
public com.google.protobuf.Duration getCleanupInterval()
The interval for removing stale hosts from a cluster type :ref:`ORIGINAL_DST<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.ORIGINAL_DST>`. Hosts are considered stale if they have not been used as upstream destinations during this interval. New hosts are added to original destination clusters on demand as new connections are redirected to Envoy, causing the number of hosts in the cluster to grow over time. Hosts that are not stale (they are actively used as destinations) are kept in the cluster, which allows connections to them remain open, saving the latency that would otherwise be spent on opening new connections. If this setting is not specified, the value defaults to 5000ms. For cluster types other than :ref:`ORIGINAL_DST<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.ORIGINAL_DST>` this setting is ignored.
.google.protobuf.Duration cleanup_interval = 20 [(.validate.rules) = { ... }
getCleanupInterval
in interface ClusterOrBuilder
public com.google.protobuf.DurationOrBuilder getCleanupIntervalOrBuilder()
The interval for removing stale hosts from a cluster type :ref:`ORIGINAL_DST<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.ORIGINAL_DST>`. Hosts are considered stale if they have not been used as upstream destinations during this interval. New hosts are added to original destination clusters on demand as new connections are redirected to Envoy, causing the number of hosts in the cluster to grow over time. Hosts that are not stale (they are actively used as destinations) are kept in the cluster, which allows connections to them remain open, saving the latency that would otherwise be spent on opening new connections. If this setting is not specified, the value defaults to 5000ms. For cluster types other than :ref:`ORIGINAL_DST<envoy_api_enum_value_config.cluster.v4alpha.Cluster.DiscoveryType.ORIGINAL_DST>` this setting is ignored.
.google.protobuf.Duration cleanup_interval = 20 [(.validate.rules) = { ... }
getCleanupIntervalOrBuilder
in interface ClusterOrBuilder
public boolean hasUpstreamBindConfig()
Optional configuration used to bind newly established upstream connections. This overrides any bind_config specified in the bootstrap proto. If the address and port are empty, no bind will be performed.
.envoy.config.core.v4alpha.BindConfig upstream_bind_config = 21;
hasUpstreamBindConfig
in interface ClusterOrBuilder
public BindConfig getUpstreamBindConfig()
Optional configuration used to bind newly established upstream connections. This overrides any bind_config specified in the bootstrap proto. If the address and port are empty, no bind will be performed.
.envoy.config.core.v4alpha.BindConfig upstream_bind_config = 21;
getUpstreamBindConfig
in interface ClusterOrBuilder
public BindConfigOrBuilder getUpstreamBindConfigOrBuilder()
Optional configuration used to bind newly established upstream connections. This overrides any bind_config specified in the bootstrap proto. If the address and port are empty, no bind will be performed.
.envoy.config.core.v4alpha.BindConfig upstream_bind_config = 21;
getUpstreamBindConfigOrBuilder
in interface ClusterOrBuilder
public boolean hasLbSubsetConfig()
Configuration for load balancing subsetting.
.envoy.config.cluster.v4alpha.Cluster.LbSubsetConfig lb_subset_config = 22;
hasLbSubsetConfig
in interface ClusterOrBuilder
public Cluster.LbSubsetConfig getLbSubsetConfig()
Configuration for load balancing subsetting.
.envoy.config.cluster.v4alpha.Cluster.LbSubsetConfig lb_subset_config = 22;
getLbSubsetConfig
in interface ClusterOrBuilder
public Cluster.LbSubsetConfigOrBuilder getLbSubsetConfigOrBuilder()
Configuration for load balancing subsetting.
.envoy.config.cluster.v4alpha.Cluster.LbSubsetConfig lb_subset_config = 22;
getLbSubsetConfigOrBuilder
in interface ClusterOrBuilder
public boolean hasRingHashLbConfig()
Optional configuration for the Ring Hash load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.RingHashLbConfig ring_hash_lb_config = 23;
hasRingHashLbConfig
in interface ClusterOrBuilder
public Cluster.RingHashLbConfig getRingHashLbConfig()
Optional configuration for the Ring Hash load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.RingHashLbConfig ring_hash_lb_config = 23;
getRingHashLbConfig
in interface ClusterOrBuilder
public Cluster.RingHashLbConfigOrBuilder getRingHashLbConfigOrBuilder()
Optional configuration for the Ring Hash load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.RingHashLbConfig ring_hash_lb_config = 23;
getRingHashLbConfigOrBuilder
in interface ClusterOrBuilder
public boolean hasMaglevLbConfig()
Optional configuration for the Maglev load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.MaglevLbConfig maglev_lb_config = 52;
hasMaglevLbConfig
in interface ClusterOrBuilder
public Cluster.MaglevLbConfig getMaglevLbConfig()
Optional configuration for the Maglev load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.MaglevLbConfig maglev_lb_config = 52;
getMaglevLbConfig
in interface ClusterOrBuilder
public Cluster.MaglevLbConfigOrBuilder getMaglevLbConfigOrBuilder()
Optional configuration for the Maglev load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.MaglevLbConfig maglev_lb_config = 52;
getMaglevLbConfigOrBuilder
in interface ClusterOrBuilder
public boolean hasOriginalDstLbConfig()
Optional configuration for the Original Destination load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.OriginalDstLbConfig original_dst_lb_config = 34;
hasOriginalDstLbConfig
in interface ClusterOrBuilder
public Cluster.OriginalDstLbConfig getOriginalDstLbConfig()
Optional configuration for the Original Destination load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.OriginalDstLbConfig original_dst_lb_config = 34;
getOriginalDstLbConfig
in interface ClusterOrBuilder
public Cluster.OriginalDstLbConfigOrBuilder getOriginalDstLbConfigOrBuilder()
Optional configuration for the Original Destination load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.OriginalDstLbConfig original_dst_lb_config = 34;
getOriginalDstLbConfigOrBuilder
in interface ClusterOrBuilder
public boolean hasLeastRequestLbConfig()
Optional configuration for the LeastRequest load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.LeastRequestLbConfig least_request_lb_config = 37;
hasLeastRequestLbConfig
in interface ClusterOrBuilder
public Cluster.LeastRequestLbConfig getLeastRequestLbConfig()
Optional configuration for the LeastRequest load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.LeastRequestLbConfig least_request_lb_config = 37;
getLeastRequestLbConfig
in interface ClusterOrBuilder
public Cluster.LeastRequestLbConfigOrBuilder getLeastRequestLbConfigOrBuilder()
Optional configuration for the LeastRequest load balancing policy.
.envoy.config.cluster.v4alpha.Cluster.LeastRequestLbConfig least_request_lb_config = 37;
getLeastRequestLbConfigOrBuilder
in interface ClusterOrBuilder
public boolean hasCommonLbConfig()
Common configuration for all load balancer implementations.
.envoy.config.cluster.v4alpha.Cluster.CommonLbConfig common_lb_config = 27;
hasCommonLbConfig
in interface ClusterOrBuilder
public Cluster.CommonLbConfig getCommonLbConfig()
Common configuration for all load balancer implementations.
.envoy.config.cluster.v4alpha.Cluster.CommonLbConfig common_lb_config = 27;
getCommonLbConfig
in interface ClusterOrBuilder
public Cluster.CommonLbConfigOrBuilder getCommonLbConfigOrBuilder()
Common configuration for all load balancer implementations.
.envoy.config.cluster.v4alpha.Cluster.CommonLbConfig common_lb_config = 27;
getCommonLbConfigOrBuilder
in interface ClusterOrBuilder
public boolean hasTransportSocket()
Optional custom transport socket implementation to use for upstream connections. To setup TLS, set a transport socket with name `tls` and :ref:`UpstreamTlsContexts <envoy_api_msg_extensions.transport_sockets.tls.v4alpha.UpstreamTlsContext>` in the `typed_config`. If no transport socket configuration is specified, new connections will be set up with plaintext.
.envoy.config.core.v4alpha.TransportSocket transport_socket = 24;
hasTransportSocket
in interface ClusterOrBuilder
public TransportSocket getTransportSocket()
Optional custom transport socket implementation to use for upstream connections. To setup TLS, set a transport socket with name `tls` and :ref:`UpstreamTlsContexts <envoy_api_msg_extensions.transport_sockets.tls.v4alpha.UpstreamTlsContext>` in the `typed_config`. If no transport socket configuration is specified, new connections will be set up with plaintext.
.envoy.config.core.v4alpha.TransportSocket transport_socket = 24;
getTransportSocket
in interface ClusterOrBuilder
public TransportSocketOrBuilder getTransportSocketOrBuilder()
Optional custom transport socket implementation to use for upstream connections. To setup TLS, set a transport socket with name `tls` and :ref:`UpstreamTlsContexts <envoy_api_msg_extensions.transport_sockets.tls.v4alpha.UpstreamTlsContext>` in the `typed_config`. If no transport socket configuration is specified, new connections will be set up with plaintext.
.envoy.config.core.v4alpha.TransportSocket transport_socket = 24;
getTransportSocketOrBuilder
in interface ClusterOrBuilder
public boolean hasMetadata()
The Metadata field can be used to provide additional information about the cluster. It can be used for stats, logging, and varying filter behavior. Fields should use reverse DNS notation to denote which entity within Envoy will need the information. For instance, if the metadata is intended for the Router filter, the filter name should be specified as *envoy.filters.http.router*.
.envoy.config.core.v4alpha.Metadata metadata = 25;
hasMetadata
in interface ClusterOrBuilder
public Metadata getMetadata()
The Metadata field can be used to provide additional information about the cluster. It can be used for stats, logging, and varying filter behavior. Fields should use reverse DNS notation to denote which entity within Envoy will need the information. For instance, if the metadata is intended for the Router filter, the filter name should be specified as *envoy.filters.http.router*.
.envoy.config.core.v4alpha.Metadata metadata = 25;
getMetadata
in interface ClusterOrBuilder
public MetadataOrBuilder getMetadataOrBuilder()
The Metadata field can be used to provide additional information about the cluster. It can be used for stats, logging, and varying filter behavior. Fields should use reverse DNS notation to denote which entity within Envoy will need the information. For instance, if the metadata is intended for the Router filter, the filter name should be specified as *envoy.filters.http.router*.
.envoy.config.core.v4alpha.Metadata metadata = 25;
getMetadataOrBuilder
in interface ClusterOrBuilder
public boolean hasUpstreamConnectionOptions()
Optional options for upstream connections.
.envoy.config.cluster.v4alpha.UpstreamConnectionOptions upstream_connection_options = 30;
hasUpstreamConnectionOptions
in interface ClusterOrBuilder
public UpstreamConnectionOptions getUpstreamConnectionOptions()
Optional options for upstream connections.
.envoy.config.cluster.v4alpha.UpstreamConnectionOptions upstream_connection_options = 30;
getUpstreamConnectionOptions
in interface ClusterOrBuilder
public UpstreamConnectionOptionsOrBuilder getUpstreamConnectionOptionsOrBuilder()
Optional options for upstream connections.
.envoy.config.cluster.v4alpha.UpstreamConnectionOptions upstream_connection_options = 30;
getUpstreamConnectionOptionsOrBuilder
in interface ClusterOrBuilder
public boolean getCloseConnectionsOnHostHealthFailure()
If an upstream host becomes unhealthy (as determined by the configured health checks or outlier detection), immediately close all connections to the failed host. .. note:: This is currently only supported for connections created by tcp_proxy. .. note:: The current implementation of this feature closes all connections immediately when the unhealthy status is detected. If there are a large number of connections open to an upstream host that becomes unhealthy, Envoy may spend a substantial amount of time exclusively closing these connections, and not processing any other traffic.
bool close_connections_on_host_health_failure = 31;
getCloseConnectionsOnHostHealthFailure
in interface ClusterOrBuilder
public boolean getIgnoreHealthOnHostRemoval()
If set to true, Envoy will ignore the health value of a host when processing its removal from service discovery. This means that if active health checking is used, Envoy will *not* wait for the endpoint to go unhealthy before removing it.
bool ignore_health_on_host_removal = 32;
getIgnoreHealthOnHostRemoval
in interface ClusterOrBuilder
public List<Filter> getFiltersList()
An (optional) network filter chain, listed in the order the filters should be applied. The chain will be applied to all outgoing connections that Envoy makes to the upstream servers of this cluster.
repeated .envoy.config.cluster.v4alpha.Filter filters = 40;
getFiltersList
in interface ClusterOrBuilder
public List<? extends FilterOrBuilder> getFiltersOrBuilderList()
An (optional) network filter chain, listed in the order the filters should be applied. The chain will be applied to all outgoing connections that Envoy makes to the upstream servers of this cluster.
repeated .envoy.config.cluster.v4alpha.Filter filters = 40;
getFiltersOrBuilderList
in interface ClusterOrBuilder
public int getFiltersCount()
An (optional) network filter chain, listed in the order the filters should be applied. The chain will be applied to all outgoing connections that Envoy makes to the upstream servers of this cluster.
repeated .envoy.config.cluster.v4alpha.Filter filters = 40;
getFiltersCount
in interface ClusterOrBuilder
public Filter getFilters(int index)
An (optional) network filter chain, listed in the order the filters should be applied. The chain will be applied to all outgoing connections that Envoy makes to the upstream servers of this cluster.
repeated .envoy.config.cluster.v4alpha.Filter filters = 40;
getFilters
in interface ClusterOrBuilder
public FilterOrBuilder getFiltersOrBuilder(int index)
An (optional) network filter chain, listed in the order the filters should be applied. The chain will be applied to all outgoing connections that Envoy makes to the upstream servers of this cluster.
repeated .envoy.config.cluster.v4alpha.Filter filters = 40;
getFiltersOrBuilder
in interface ClusterOrBuilder
public boolean hasLoadBalancingPolicy()
[#not-implemented-hide:] New mechanism for LB policy configuration. Used only if the :ref:`lb_policy<envoy_api_field_config.cluster.v4alpha.Cluster.lb_policy>` field has the value :ref:`LOAD_BALANCING_POLICY_CONFIG<envoy_api_enum_value_config.cluster.v4alpha.Cluster.LbPolicy.LOAD_BALANCING_POLICY_CONFIG>`.
.envoy.config.cluster.v4alpha.LoadBalancingPolicy load_balancing_policy = 41;
hasLoadBalancingPolicy
in interface ClusterOrBuilder
public LoadBalancingPolicy getLoadBalancingPolicy()
[#not-implemented-hide:] New mechanism for LB policy configuration. Used only if the :ref:`lb_policy<envoy_api_field_config.cluster.v4alpha.Cluster.lb_policy>` field has the value :ref:`LOAD_BALANCING_POLICY_CONFIG<envoy_api_enum_value_config.cluster.v4alpha.Cluster.LbPolicy.LOAD_BALANCING_POLICY_CONFIG>`.
.envoy.config.cluster.v4alpha.LoadBalancingPolicy load_balancing_policy = 41;
getLoadBalancingPolicy
in interface ClusterOrBuilder
public LoadBalancingPolicyOrBuilder getLoadBalancingPolicyOrBuilder()
[#not-implemented-hide:] New mechanism for LB policy configuration. Used only if the :ref:`lb_policy<envoy_api_field_config.cluster.v4alpha.Cluster.lb_policy>` field has the value :ref:`LOAD_BALANCING_POLICY_CONFIG<envoy_api_enum_value_config.cluster.v4alpha.Cluster.LbPolicy.LOAD_BALANCING_POLICY_CONFIG>`.
.envoy.config.cluster.v4alpha.LoadBalancingPolicy load_balancing_policy = 41;
getLoadBalancingPolicyOrBuilder
in interface ClusterOrBuilder
public boolean hasLrsServer()
[#not-implemented-hide:] If present, tells the client where to send load reports via LRS. If not present, the client will fall back to a client-side default, which may be either (a) don't send any load reports or (b) send load reports for all clusters to a single default server (which may be configured in the bootstrap file). Note that if multiple clusters point to the same LRS server, the client may choose to create a separate stream for each cluster or it may choose to coalesce the data for multiple clusters onto a single stream. Either way, the client must make sure to send the data for any given cluster on no more than one stream. [#next-major-version: In the v3 API, we should consider restructuring this somehow, maybe by allowing LRS to go on the ADS stream, or maybe by moving some of the negotiation from the LRS stream here.]
.envoy.config.core.v4alpha.ConfigSource lrs_server = 42;
hasLrsServer
in interface ClusterOrBuilder
public ConfigSource getLrsServer()
[#not-implemented-hide:] If present, tells the client where to send load reports via LRS. If not present, the client will fall back to a client-side default, which may be either (a) don't send any load reports or (b) send load reports for all clusters to a single default server (which may be configured in the bootstrap file). Note that if multiple clusters point to the same LRS server, the client may choose to create a separate stream for each cluster or it may choose to coalesce the data for multiple clusters onto a single stream. Either way, the client must make sure to send the data for any given cluster on no more than one stream. [#next-major-version: In the v3 API, we should consider restructuring this somehow, maybe by allowing LRS to go on the ADS stream, or maybe by moving some of the negotiation from the LRS stream here.]
.envoy.config.core.v4alpha.ConfigSource lrs_server = 42;
getLrsServer
in interface ClusterOrBuilder
public ConfigSourceOrBuilder getLrsServerOrBuilder()
[#not-implemented-hide:] If present, tells the client where to send load reports via LRS. If not present, the client will fall back to a client-side default, which may be either (a) don't send any load reports or (b) send load reports for all clusters to a single default server (which may be configured in the bootstrap file). Note that if multiple clusters point to the same LRS server, the client may choose to create a separate stream for each cluster or it may choose to coalesce the data for multiple clusters onto a single stream. Either way, the client must make sure to send the data for any given cluster on no more than one stream. [#next-major-version: In the v3 API, we should consider restructuring this somehow, maybe by allowing LRS to go on the ADS stream, or maybe by moving some of the negotiation from the LRS stream here.]
.envoy.config.core.v4alpha.ConfigSource lrs_server = 42;
getLrsServerOrBuilder
in interface ClusterOrBuilder
public boolean hasUpstreamConfig()
Optional customization and configuration of upstream connection pool, and upstream type. Currently this field only applies for HTTP traffic but is designed for eventual use for custom TCP upstreams. For HTTP traffic, Envoy will generally take downstream HTTP and send it upstream as upstream HTTP, using the http connection pool and the codec from `http2_protocol_options` For routes where CONNECT termination is configured, Envoy will take downstream CONNECT requests and forward the CONNECT payload upstream over raw TCP using the tcp connection pool. The default pool used is the generic connection pool which creates the HTTP upstream for most HTTP requests, and the TCP upstream if CONNECT termination is configured. If users desire custom connection pool or upstream behavior, for example terminating CONNECT only if a custom filter indicates it is appropriate, the custom factories can be registered and configured here.
.envoy.config.core.v4alpha.TypedExtensionConfig upstream_config = 48;
hasUpstreamConfig
in interface ClusterOrBuilder
public TypedExtensionConfig getUpstreamConfig()
Optional customization and configuration of upstream connection pool, and upstream type. Currently this field only applies for HTTP traffic but is designed for eventual use for custom TCP upstreams. For HTTP traffic, Envoy will generally take downstream HTTP and send it upstream as upstream HTTP, using the http connection pool and the codec from `http2_protocol_options` For routes where CONNECT termination is configured, Envoy will take downstream CONNECT requests and forward the CONNECT payload upstream over raw TCP using the tcp connection pool. The default pool used is the generic connection pool which creates the HTTP upstream for most HTTP requests, and the TCP upstream if CONNECT termination is configured. If users desire custom connection pool or upstream behavior, for example terminating CONNECT only if a custom filter indicates it is appropriate, the custom factories can be registered and configured here.
.envoy.config.core.v4alpha.TypedExtensionConfig upstream_config = 48;
getUpstreamConfig
in interface ClusterOrBuilder
public TypedExtensionConfigOrBuilder getUpstreamConfigOrBuilder()
Optional customization and configuration of upstream connection pool, and upstream type. Currently this field only applies for HTTP traffic but is designed for eventual use for custom TCP upstreams. For HTTP traffic, Envoy will generally take downstream HTTP and send it upstream as upstream HTTP, using the http connection pool and the codec from `http2_protocol_options` For routes where CONNECT termination is configured, Envoy will take downstream CONNECT requests and forward the CONNECT payload upstream over raw TCP using the tcp connection pool. The default pool used is the generic connection pool which creates the HTTP upstream for most HTTP requests, and the TCP upstream if CONNECT termination is configured. If users desire custom connection pool or upstream behavior, for example terminating CONNECT only if a custom filter indicates it is appropriate, the custom factories can be registered and configured here.
.envoy.config.core.v4alpha.TypedExtensionConfig upstream_config = 48;
getUpstreamConfigOrBuilder
in interface ClusterOrBuilder
public boolean hasTrackClusterStats()
Configuration to track optional cluster stats.
.envoy.config.cluster.v4alpha.TrackClusterStats track_cluster_stats = 49;
hasTrackClusterStats
in interface ClusterOrBuilder
public TrackClusterStats getTrackClusterStats()
Configuration to track optional cluster stats.
.envoy.config.cluster.v4alpha.TrackClusterStats track_cluster_stats = 49;
getTrackClusterStats
in interface ClusterOrBuilder
public TrackClusterStatsOrBuilder getTrackClusterStatsOrBuilder()
Configuration to track optional cluster stats.
.envoy.config.cluster.v4alpha.TrackClusterStats track_cluster_stats = 49;
getTrackClusterStatsOrBuilder
in interface ClusterOrBuilder
public boolean hasPreconnectPolicy()
[#not-implemented-hide:] Preconnect configuration for this cluster.
.envoy.config.cluster.v4alpha.Cluster.PreconnectPolicy preconnect_policy = 50;
hasPreconnectPolicy
in interface ClusterOrBuilder
public Cluster.PreconnectPolicy getPreconnectPolicy()
[#not-implemented-hide:] Preconnect configuration for this cluster.
.envoy.config.cluster.v4alpha.Cluster.PreconnectPolicy preconnect_policy = 50;
getPreconnectPolicy
in interface ClusterOrBuilder
public Cluster.PreconnectPolicyOrBuilder getPreconnectPolicyOrBuilder()
[#not-implemented-hide:] Preconnect configuration for this cluster.
.envoy.config.cluster.v4alpha.Cluster.PreconnectPolicy preconnect_policy = 50;
getPreconnectPolicyOrBuilder
in interface ClusterOrBuilder
public boolean getConnectionPoolPerDownstreamConnection()
If `connection_pool_per_downstream_connection` is true, the cluster will use a separate connection pool for every downstream connection
bool connection_pool_per_downstream_connection = 51;
getConnectionPoolPerDownstreamConnection
in interface ClusterOrBuilder
public final boolean isInitialized()
isInitialized
in interface com.google.protobuf.MessageLiteOrBuilder
isInitialized
in class com.google.protobuf.GeneratedMessageV3
public void writeTo(com.google.protobuf.CodedOutputStream output) throws IOException
writeTo
in interface com.google.protobuf.MessageLite
writeTo
in class com.google.protobuf.GeneratedMessageV3
IOException
public int getSerializedSize()
getSerializedSize
in interface com.google.protobuf.MessageLite
getSerializedSize
in class com.google.protobuf.GeneratedMessageV3
public boolean equals(Object obj)
equals
in interface com.google.protobuf.Message
equals
in class com.google.protobuf.AbstractMessage
public int hashCode()
hashCode
in interface com.google.protobuf.Message
hashCode
in class com.google.protobuf.AbstractMessage
public static Cluster parseFrom(ByteBuffer data) throws com.google.protobuf.InvalidProtocolBufferException
com.google.protobuf.InvalidProtocolBufferException
public static Cluster parseFrom(ByteBuffer data, com.google.protobuf.ExtensionRegistryLite extensionRegistry) throws com.google.protobuf.InvalidProtocolBufferException
com.google.protobuf.InvalidProtocolBufferException
public static Cluster parseFrom(com.google.protobuf.ByteString data) throws com.google.protobuf.InvalidProtocolBufferException
com.google.protobuf.InvalidProtocolBufferException
public static Cluster parseFrom(com.google.protobuf.ByteString data, com.google.protobuf.ExtensionRegistryLite extensionRegistry) throws com.google.protobuf.InvalidProtocolBufferException
com.google.protobuf.InvalidProtocolBufferException
public static Cluster parseFrom(byte[] data) throws com.google.protobuf.InvalidProtocolBufferException
com.google.protobuf.InvalidProtocolBufferException
public static Cluster parseFrom(byte[] data, com.google.protobuf.ExtensionRegistryLite extensionRegistry) throws com.google.protobuf.InvalidProtocolBufferException
com.google.protobuf.InvalidProtocolBufferException
public static Cluster parseFrom(InputStream input) throws IOException
IOException
public static Cluster parseFrom(InputStream input, com.google.protobuf.ExtensionRegistryLite extensionRegistry) throws IOException
IOException
public static Cluster parseDelimitedFrom(InputStream input) throws IOException
IOException
public static Cluster parseDelimitedFrom(InputStream input, com.google.protobuf.ExtensionRegistryLite extensionRegistry) throws IOException
IOException
public static Cluster parseFrom(com.google.protobuf.CodedInputStream input) throws IOException
IOException
public static Cluster parseFrom(com.google.protobuf.CodedInputStream input, com.google.protobuf.ExtensionRegistryLite extensionRegistry) throws IOException
IOException
public Cluster.Builder newBuilderForType()
newBuilderForType
in interface com.google.protobuf.Message
newBuilderForType
in interface com.google.protobuf.MessageLite
public static Cluster.Builder newBuilder()
public static Cluster.Builder newBuilder(Cluster prototype)
public Cluster.Builder toBuilder()
toBuilder
in interface com.google.protobuf.Message
toBuilder
in interface com.google.protobuf.MessageLite
protected Cluster.Builder newBuilderForType(com.google.protobuf.GeneratedMessageV3.BuilderParent parent)
newBuilderForType
in class com.google.protobuf.GeneratedMessageV3
public static Cluster getDefaultInstance()
public static com.google.protobuf.Parser<Cluster> parser()
public com.google.protobuf.Parser<Cluster> getParserForType()
getParserForType
in interface com.google.protobuf.Message
getParserForType
in interface com.google.protobuf.MessageLite
getParserForType
in class com.google.protobuf.GeneratedMessageV3
public Cluster getDefaultInstanceForType()
getDefaultInstanceForType
in interface com.google.protobuf.MessageLiteOrBuilder
getDefaultInstanceForType
in interface com.google.protobuf.MessageOrBuilder
Copyright © 2018–2021 The Envoy Project. All rights reserved.