android.javax.sip

Interface SipProvider

All Known Subinterfaces:

SipProviderExt

All Known Implementing Classes:

SipProviderImpl

public interface SipProvider

This interface represents the messaging entity of a SIP stack and as such is the interface that defines the messaging and transactional component view of the SIP stack. It must be implemented by any object representing a SIP stack compliant to this specification that interacts directly with a proprietary implementation of a SIP stack. This interface defines the methods that enable any registered application implementing the SipListener interface to:

• Register a SipListener to the SipProvider. Once the SipListener is registered with the SipProvider it will get notified of Events representing either Request, Response, Timeout messages, Network errors and Transaction termination.
• De-register a SipListener from the SipProvider. Once a SipListener is de-registered, it will no longer receive any Events from that SipProvider.
• Send Request's statelessly.
• Send Response's statelessly.
• Client and Server Transaction creation methods.
• Listening Point manipulation methods.
• New CallIdHeader accessor method.
• SipStack object accessor method.

Architecture:
This specification defines a many-to-one relationship between a SipProvider and a SipStack, a one-to-many relationship between a SipProvider and a ListeningPoint and a many-to-one relationship between a SipProvider and a SipListener.

Each SipProvider can be related to zero or more ListeningPoints. However, the SipProvider can have only one ListeningPoint for each transport type. For example, a single SipProvider can have one TCP ListeningPoint and one UDP ListeningPoint but cannot have two UDP ListeningPoints. Applications that wish to have multiple ListeningPoints with the same transport must use a separate SipProvider for each such ListeningPoint.

The ListeningPoints of the SipProvider specify the local address from where request messages will be sent. When the application sends a request directly from a SipProvider or from an object that the SipProvider created (Dialog or Transaction) the application might not know in advance the transport that this request will use. The transport is often resolved using a DNS server. In the process of sending the request, the remote transport will be resolved. The provider will then be able to send the request from a suitable ListeningPoint according to the resolved transport. If the resolved transport is UDP, the Provider's UDP ListeningPoint will be used. If the resolved address is TCP, the Providers's TCP ListeningPoint will be used.

If the application creates a SipProvider with a single ListeningPoint, let's say UDP, it means that UDP requests will be sent from the specific UDP ListeningPoint, and that the application does not care from where TCP requests will be sent. This is left for the SipStack decision.

Since the transport might not be known in advance, the application might find it difficult to specify the transport in the Via header. The SipProvider is responsible for fixing the Via header transport if needed. If the application set a sent-by identifier to the ListeningPoint that is different then the sent-by parameter in the message, the sent-by parameter of the message will be updated.

If the application created a provider with zero ListeningPoint, it must have only a single SipProvider per SipStack.

A SipProvider has the capability to behave transaction statefully, dialog statefully and statelessly. The transaction stateful methods are defined on the ClientTransaction and ServerTransaction respectfully. The transaction stateful method defined specifically for UAC and stateful proxy applications is:

• ClientTransaction.sendRequest()

The stateful (transactional) convenience method defined specifically for UAS and stateful proxy applications is:

• ServerTransaction.sendResponse(Response)

The dialog stateful methods defined specifically for UAC and stateful proxy applications are:

• Dialog.sendRequest(ClientTransaction)
• Dialog.sendAck(Request)

The stateless methods (non-transactional) defined on the SipProvider are:

• sendResponse(Response)
• sendRequest(Request)

Transaction Model:
This specification supports stateful and stateless applications on a per message basis, hence transactional semantics are not mandated for all messages. This specification defines two types of transactions, server transactions and client transactions. A stateless proxy does not contain a client or server transaction, stateless proxies are effectively transparent with respect to transactions.

Client Transaction:
A client transaction exists between a UAC and a UAS specific to Request messages and a server transaction exists between a UAS and a UAC specific to Response messages. A transaction either server or client identifies messages sent between two SIP entities. The purpose of a client transaction is to identify a Request sent by an application that will reliably deliver the Request to a server transaction on the responding SIP entity. The purpose of a server transaction is to identify a Response sent by an application that will reliably deliver the Response to the request initiator.

Server Transaction:
A new server transaction is required for each response that an application decides to respond to statefully, as follows:

• Dialog-Creating Requests: A server transaction is not automatically generated by a SipProvider implementation upon receipt of every Dialog-Creating Request i.e. INVITE. Instead the server transaction is set to null in the RequestEvent and the RequestEvent also containing the Request is passed to the application. It is then the responsibility of the application to decide to handle the Dialog-Creating Request statefully or statelessly, using the appropriate send methods on the SipProvider and the ServerTransaction. If a retransmission of the initial Request request is recieved by the SipProvider the following procedures should be adhered to:
  • Determine if an exisiting transaction is already handling this Request.
  • If a transaction exists do not pass the Request to the application via a RequestEvent.
  • If a transaction doesn't exist pass the retransmitted request to the application as a RequestEvent.
• Non-Dialog-Creating Requests - When the SipProvider receives a Non-Dialog-Creating Request upon which this application has already responded to the Dialog-Creating Request of the same dialogue the server transaction is automatically placed to the RequestEvent and passed up to the application upon which it can respond. Note that the server transaction may be null in a stateful implementation if the incoming request does not match any dialog but must be part of one. That is for requests that must have state but for which the stack cannot find that state, the application can still handle these requests statelessly. The application cannot create a new server transaction for such requests.

Sending Requests:
The client side of the transport layer is responsible for sending the request. The application passes the the Request to the ClientTransaction Dialog or the SipProvider that will send the Request over one of the SipProvider's ListeningPoints. The SipProvider will choose a ListeningPoint that has the same transport as the destination. For example, a Request that is going to be sent over TCP will use a TCP ListeningPoint. See section 18.1.1 of RFC3261.

Sending Responses:
The server side of the transport layer is responsible for sending the responses. The application passes the Response to the ServerTransaction or the SipProvider that will send the Response over one of its ListeningPoints. RFC3261. The response must be sent from the same ListeningPoint on which the request was received.

Receiving Requests:
A SipProvider should be prepared to receive requests on any IP address, port and transport encapsulated in one of its ListeningPoints. When the SipProvider receives a request over any transport, it must examine the value of the "sent-by" parameter in the top Via header. If the host portion of the "sent-by" parameter contains a domain name, or if it contains an IP address that differs from the packet source address, the server must add a "received" parameter to that Via header field value. This parameter must contain the source address from which the packet was received. This is to assist the SipProvider in sending the response, since it must be sent to the source IP address from which the request came. Next, the SipProvider attempts to match the request to a server transaction. If there are any server transactions in existence, the server transport uses the matching procedures of Chapter 17 of RFC3261 to attempt to match the response to an existing transaction. If a matching server transaction is found, the request is passed to that transaction, encapsulated into a RequestEvent and fired to the application for processing. If no match is found, the request is passed to the application, which may decide to construct a new server transaction for that request.

Receiving Responses
Responses are first processed by the transport layer and then passed up to the transaction layer. The transaction layer performs its processing and then passes the response up to the application. When a response is received, the SipProvider examines the top Via header. If the value of the "sent-by" parameter in that header field value does not correspond to a value that the client transport is configured to insert into requests, the response MUST be silently discarded. If there are any client transactions in existence, the client transport uses the matching procedures of Chapter 17 of RFC3261 to attempt to match the response to an existing transaction. If there is a match, the response must be passed to that transaction, encapsulated into a ResponseEvent and fired to the application. Otherwise, the response is stray and must be passed to the application to determine its outcome i.e. a proxy will forward them, while a User Agent will discard.

Version:

1.2

Author:

BEA Systems, NIST

See Also:

SipListener, SipStack

Method Summary

Methods

Modifier and Type	Method and Description
void	addListeningPoint(ListeningPoint listeningPoint) This method adds the supplied ListeningPoint to the list of ListeningPoints associated to this SipProvider.
void	addSipListener(SipListener sipListener) This method registers the SipListener object to this SipProvider, once registered the SIP Listener recieve events emitted from the SipProvider.
ListeningPoint	getListeningPoint() Deprecated. Since v1.2. Note that in v1.1 a SipProvider could only be associated to a single listening point, this restriction has been lifted to allow a SipProvider to have a specific ListeningPoints for each transport. For backwards compatibility, this method will return the first ListeningPoint of the list of ListeningPoints associated with the SipProvider. This method has been replaced with getListeningPoints().
ListeningPoint	getListeningPoint(String transport) Get the listening point for a given transport.
ListeningPoint[]	getListeningPoints() Returns all the ListeningPoints of this SipProvider.
CallIdHeader	getNewCallId() Returns a unique CallIdHeader for identifying dialogues between two SIP applications.
ClientTransaction	getNewClientTransaction(Request request) Before an application can send a new request it must first request a new client transaction to handle that Request.
Dialog	getNewDialog(Transaction transaction) Create a dialog for the given transaction.
ServerTransaction	getNewServerTransaction(Request request) An application has the responsibility of deciding to respond to a Request that does not match an existing server transaction.
SipStack	getSipStack() Returns the SipStack that created this SipProvider.
void	removeListeningPoint(ListeningPoint listeningPoint) Removes the specified ListeningPoint from this SipProvider.
void	removeSipListener(SipListener sipListener) Removes the specified SipListener from this SipProvider.
void	sendRequest(Request request) Sends the Request statelessly, that is no transaction record is associated with this action.
void	sendResponse(Response response) Sends the Response statelessly, that is no transaction record is associated with this action.
void	setAutomaticDialogSupportEnabled(boolean flag) Enable or disable automatic dialog creation for this Provider.
void	setListeningPoint(ListeningPoint listeningPoint) Deprecated. Since v1.2. Note that in v1.1 a SipProvider could only be associated to a single listening point, this restriction has been lifted to allow a SipProvider to have a specific ListeningPoints for each transport. For backwards compatibility, this method will add the ListeningPoint to the list of ListeningPoints associated with the SipProvider. This method has been replaced with addListeningPoint(ListeningPoint), the same semantics apply to this method.

Method Detail

addSipListener

void addSipListener(SipListener sipListener)
                    throws TooManyListenersException

This method registers the SipListener object to this SipProvider, once registered the SIP Listener recieve events emitted from the SipProvider. This specification restricts a unicast Listener model, that is only one Listener may be registered on the SipProvider. If an attempt is made to re-register the existing registered SipListener this method returns silently.

Parameters:

sipListener - the SipListener to be registered with the SipProvider.

Throws:

TooManyListenersException - when a new SipListener attempts to register with the SipProvider when another SipListener is already registered with this SipProvider.

removeSipListener

void removeSipListener(SipListener sipListener)

Removes the specified SipListener from this SipProvider. This method returns silently if the SipListener is not registered with the SipProvider.

Parameters:

sipListener - the SipListener to be removed from this SipProvider.

getSipStack

SipStack getSipStack()

Returns the SipStack that created this SipProvider. A SipProvider can only be attached to a single SipStack object that belongs to the same implementation as this SipProvider.

Returns:

the SipStack that created this SipProvider.

See Also:

SipStack

getListeningPoint

ListeningPoint getListeningPoint()

Deprecated. Since v1.2. Note that in v1.1 a SipProvider could only be associated to a single listening point, this restriction has been lifted to allow a SipProvider to have a specific ListeningPoints for each transport. For backwards compatibility, this method will return the first ListeningPoint of the list of ListeningPoints associated with the SipProvider. This method has been replaced with getListeningPoints().

Returns the ListeningPoint of this SipProvider. A SipProvider has a single Listening Point at any specific point in time.

getListeningPoints

ListeningPoint[] getListeningPoints()

Returns all the ListeningPoints of this SipProvider. A SipProvider may have a Listening Point for each specific transport type at any specific point in time. A SipProvider must use the same transport for sending responses that was used for sending the outbound request.

Returns:

an array of ListeningPoints associated to this SipProvider.

Since:

1.2

setListeningPoint

void setListeningPoint(ListeningPoint listeningPoint)
                       throws ObjectInUseException

Deprecated. Since v1.2. Note that in v1.1 a SipProvider could only be associated to a single listening point, this restriction has been lifted to allow a SipProvider to have a specific ListeningPoints for each transport. For backwards compatibility, this method will add the ListeningPoint to the list of ListeningPoints associated with the SipProvider. This method has been replaced with addListeningPoint(ListeningPoint), the same semantics apply to this method.

This method sets the ListeningPoint of the SipProvider.

Throws:

ObjectInUseException

addListeningPoint

void addListeningPoint(ListeningPoint listeningPoint)
                       throws ObjectInUseException,
                              TransportAlreadySupportedException

This method adds the supplied ListeningPoint to the list of ListeningPoints associated to this SipProvider. A SipProvider can only have a single ListeningPoint for each transport type at any specific time. Multiple SipProviders are prohibited to listen on the same ListeningPoints. This method returns silently if the same ListeningPoint argument is re-set on the SipProvider. If there is a ListeningPoint with the same transport but different IP or port, the implementation is expected to throw an exception.

Parameters:

listeningPoint - - the listening point to add to this ListeningPoint

Throws:

ObjectInUseException - if the supplied ListeningPoint is being used by another SipProvider or if there is already a ListeningPoint for the given transport.

TransportAlreadySupportedException - if there is already a ListeningPoint associated to this SipProvider with the same transport of the ListeningPoint.

Since:

1.2

getListeningPoint

ListeningPoint getListeningPoint(String transport)

Get the listening point for a given transport. Null is returned if there is no listening point for that transport.

Parameters:

transport - -- the transport for the listening point

Since:

1.2

removeListeningPoint

void removeListeningPoint(ListeningPoint listeningPoint)
                          throws ObjectInUseException

Removes the specified ListeningPoint from this SipProvider. This method returns silently if the ListeningPoint is not associated to this SipProvider. A SipProvider must have at least a single ListeningPoint at all times. When the ListeningPoint is removed the SipProvider no further requests will be sent out over this ListeningPoint.

Parameters:

listeningPoint - the ListenPoint to be removed from this SipProvider.

Throws:

ObjectInUseException - if the ListeningPoint is already in use or is the last ListeningPoint associated with this SipProvider.

Since:

1.2

getNewCallId

CallIdHeader getNewCallId()

Returns a unique CallIdHeader for identifying dialogues between two SIP applications.

Returns:

the new CallIdHeader unique within the SipProvider.

getNewClientTransaction

ClientTransaction getNewClientTransaction(Request request)
                                          throws TransactionUnavailableException

Before an application can send a new request it must first request a new client transaction to handle that Request. This method is called by the application to create the new client transaction befores it sends the Request on that transaction. This methods returns a new unique client transaction that can be passed to send Requests statefully.Do not call this method for ACK requests.

Parameters:

request - the new Request message that is to handled statefully by the ClientTransaction.

Returns:

a new unique client transaction.

Throws:

TransactionUnavailableException - if a new transaction can not be created, for example the next hop of the request can not be determined or the method is "ACK"

See Also:

ClientTransaction

getNewServerTransaction

ServerTransaction getNewServerTransaction(Request request)
                                          throws TransactionAlreadyExistsException,
                                                 TransactionUnavailableException

An application has the responsibility of deciding to respond to a Request that does not match an existing server transaction. This method is called by an application that decides to respond to an unmatched Request statefully. This methods return a new unique server transaction that can be used to respond to the request statefully. Do ~not~ call this method for ACK requests.

Parameters:

request - the Request message that the doesn't match an existing transaction that the application decides to handle statefully.

Returns:

a new unique server transaction.

Throws:

TransactionAlreadyExistsException - if a transaction already exists that is already handling this Request. This may happen if the application gets retransmits of the same request before the initial transaction is allocated.

TransactionUnavailableException - if a new transaction can not be created, for example the next hop of the request can not be determined or the method is "ACK"

See Also:

ServerTransaction

sendRequest

void sendRequest(Request request)
                 throws SipException

Sends the Request statelessly, that is no transaction record is associated with this action. This method implies that the application is functioning as a stateless proxy, hence the underlying SipProvider acts statelessly. A stateless proxy simply forwards every request it receives downstream and discards information about the Request message once the message has been forwarded. A stateless proxy does not have any notion of a transaction.

Once the Request message has been passed to this method, the SipProvider will forget about this Request. No transaction semantics will be associated with the Request and the SipProvider will not handle retranmissions for the Request. If these semantics are required it is the responsibility of the application not the SipProvider.

Parameters:

request - the Request message to send statelessly

Throws:

SipException - if the SipProvider cannot send the Request for any reason.

See Also:

Request

sendResponse

void sendResponse(Response response)
                  throws SipException

Sends the Response statelessly, that is no transaction record is associated with this action. This method implies that the application is functioning as either a stateless proxy or a stateless UAS.

• Stateless proxy - A stateless proxy simply forwards every response it receives upstream and discards information about the response message once the message has been forwarded. A stateless proxy does not have any notion of a transaction.
• Stateless UAS - A stateless UAS does not maintain transaction state. It replies to requests normally, but discards any state that would ordinarily be retained by a UAS after a response has been sent. If a stateless UAS receives a retransmission of a request, it regenerates the response and resends it, just as if it were replying to the first instance of the request. A UAS cannot be stateless unless the request processing for that method would always result in the same response if the requests are identical. Stateless UAS's do not use a transaction layer; they receive requests directly from the transport layer and send responses directly to the transport layer.

Parameters:

response - the Response to send statelessly.

Throws:

SipException - if the SipProvider cannot send the Response for any reason.

See Also:

Response, Response

getNewDialog

Dialog getNewDialog(Transaction transaction)
                    throws SipException

Create a dialog for the given transaction. This method is only called when AUTOMATIC_DIALOG_SUPPORT is off. This method is invoked when the application wants to explicitly manage the association between transaction and dialog. This must may only be called on a dialog-creating transaction. Dialogs are created in advance, before any responses are sent or received, using the initial client or server transaction. The Dialog state is set to null when the dialog is created. The server side of a dialog calls this method before sending out the response to a dialog creating request. The client side of the dialog calls this method before sending out the initial request via the dialog creating transaction. The caller is required to set up the tags and other information in the request/response before calling this method.

For UAC's Forked calls are handled as follows: The response of a forked call that completes the initially created dialog will use the original dialog that is associated with the transaction. Subsequent responses that correspond to other branches of the fork ( ie. with the same From header tag, and Call ID but different To header tags) result in the creation of additional dialogs that are associated with these responses. The created dialog is made available to the UAC ( Listener ) via the method ResponseEvent.getDialog

Transactions that belong to the Dialog are automatically associated with the Dialog by the stack and can be retrieved with Transaction.getDialog().

Parameters:

transaction - - transaction that is used to extract the relevant information to create the dialog.

Throws:

SipException - if one or more of the following is true:

1. The Method of the Request is not a Dialog creating
2. There is missing required information such as From header Tag in the Request
3. This method is called after the response recieved on the client side
4. This method is called after the response is sent out on the server side of the dialog.

Since:

1.2

setAutomaticDialogSupportEnabled

void setAutomaticDialogSupportEnabled(boolean flag)

Enable or disable automatic dialog creation for this Provider. By default, each provider inherits the automatic dialog support property from the stack(i.e. the value implied by the stack configuration property android.javax.sip.AUTOMATIC_DIALOG_SUPPORT) . This method allows for selective overriding of the stack-wide property on a per provider basis. This is useful for applications that need to support both user agent and proxy functionality in a single stack such as IMS applications and 3rd party call control. Provider instances that need to proxy requests while functioning transaction statefully should turn this property off. Provider instances that need to at as user agents can turn this support on and get the benifit of automatic dialog creation. If this support is enabled, then Dialog creating Transactions (i.e. INVITE) that are associated with this Provider automatically create a Dialog when the Transaction is created. If this support is disabled, then Transactions associated with this Provider do not result in the automatic creation of an associated Dialog at the time of Transaction creation.

Parameters:

flag - - enables or disables automatic dialog support for this provider.

Since:

v1.2

See Also:

SipStack