Package org.apache.camel.builder.component.dsl

Interface HttpComponentBuilderFactory.HttpComponentBuilder

    • Method Detail

      • cookieStore

        default HttpComponentBuilderFactory.HttpComponentBuilder cookieStore​(org.apache.http.client.CookieStore cookieStore)
        To use a custom org.apache.http.client.CookieStore. By default the org.apache.http.impl.client.BasicCookieStore is used which is an in-memory only cookie store. Notice if bridgeEndpoint=true then the cookie store is forced to be a noop cookie store as cookie shouldn't be stored as we are just bridging (eg acting as a proxy). The option is a: <code>org.apache.http.client.CookieStore</code> type. Group: producer
        Parameters:
        cookieStore - the value to set
        Returns:
        the dsl builder

      • copyHeaders

        default HttpComponentBuilderFactory.HttpComponentBuilder copyHeaders​(boolean copyHeaders)
        If this option is true then IN exchange headers will be copied to OUT exchange headers according to copy strategy. Setting this to false, allows to only include the headers from the HTTP response (not propagating IN headers). The option is a: <code>boolean</code> type. Default: true Group: producer
        Parameters:
        copyHeaders - the value to set
        Returns:
        the dsl builder

      • lazyStartProducer

        default HttpComponentBuilderFactory.HttpComponentBuilder lazyStartProducer​(boolean lazyStartProducer)
        Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. The option is a: <code>boolean</code> type. Default: false Group: producer
        Parameters:
        lazyStartProducer - the value to set
        Returns:
        the dsl builder

      • responsePayloadStreamingThreshold

        default HttpComponentBuilderFactory.HttpComponentBuilder responsePayloadStreamingThreshold​(int responsePayloadStreamingThreshold)
        This threshold in bytes controls whether the response payload should be stored in memory as a byte array or be streaming based. Set this to -1 to always use streaming mode. The option is a: <code>int</code> type. Default: 8192 Group: producer
        Parameters:
        responsePayloadStreamingThreshold - the value to set
        Returns:
        the dsl builder

      • skipRequestHeaders

        default HttpComponentBuilderFactory.HttpComponentBuilder skipRequestHeaders​(boolean skipRequestHeaders)
        Whether to skip mapping all the Camel headers as HTTP request headers. If there are no data from Camel headers needed to be included in the HTTP request then this can avoid parsing overhead with many object allocations for the JVM garbage collector. The option is a: <code>boolean</code> type. Default: false Group: producer (advanced)
        Parameters:
        skipRequestHeaders - the value to set
        Returns:
        the dsl builder

      • skipResponseHeaders

        default HttpComponentBuilderFactory.HttpComponentBuilder skipResponseHeaders​(boolean skipResponseHeaders)
        Whether to skip mapping all the HTTP response headers to Camel headers. If there are no data needed from HTTP headers then this can avoid parsing overhead with many object allocations for the JVM garbage collector. The option is a: <code>boolean</code> type. Default: false Group: producer (advanced)
        Parameters:
        skipResponseHeaders - the value to set
        Returns:
        the dsl builder

      • allowJavaSerializedObject

        default HttpComponentBuilderFactory.HttpComponentBuilder allowJavaSerializedObject​(boolean allowJavaSerializedObject)
        Whether to allow java serialization when a request uses context-type=application/x-java-serialized-object. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk. The option is a: <code>boolean</code> type. Default: false Group: advanced
        Parameters:
        allowJavaSerializedObject - the value to set
        Returns:
        the dsl builder

      • authCachingDisabled

        default HttpComponentBuilderFactory.HttpComponentBuilder authCachingDisabled​(boolean authCachingDisabled)
        Disables authentication scheme caching. The option is a: <code>boolean</code> type. Default: false Group: advanced
        Parameters:
        authCachingDisabled - the value to set
        Returns:
        the dsl builder

      • automaticRetriesDisabled

        default HttpComponentBuilderFactory.HttpComponentBuilder automaticRetriesDisabled​(boolean automaticRetriesDisabled)
        Disables automatic request recovery and re-execution. The option is a: <code>boolean</code> type. Default: false Group: advanced
        Parameters:
        automaticRetriesDisabled - the value to set
        Returns:
        the dsl builder

      • autowiredEnabled

        default HttpComponentBuilderFactory.HttpComponentBuilder autowiredEnabled​(boolean autowiredEnabled)
        Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. The option is a: <code>boolean</code> type. Default: true Group: advanced
        Parameters:
        autowiredEnabled - the value to set
        Returns:
        the dsl builder

      • clientConnectionManager

        default HttpComponentBuilderFactory.HttpComponentBuilder clientConnectionManager​(org.apache.http.conn.HttpClientConnectionManager clientConnectionManager)
        To use a custom and shared HttpClientConnectionManager to manage connections. If this has been configured then this is always used for all endpoints created by this component. The option is a: <code>org.apache.http.conn.HttpClientConnectionManager</code> type. Group: advanced
        Parameters:
        clientConnectionManager - the value to set
        Returns:
        the dsl builder

      • connectionsPerRoute

        default HttpComponentBuilderFactory.HttpComponentBuilder connectionsPerRoute​(int connectionsPerRoute)
        The maximum number of connections per route. The option is a: <code>int</code> type. Default: 20 Group: advanced
        Parameters:
        connectionsPerRoute - the value to set
        Returns:
        the dsl builder

      • connectionStateDisabled

        default HttpComponentBuilderFactory.HttpComponentBuilder connectionStateDisabled​(boolean connectionStateDisabled)
        Disables connection state tracking. The option is a: <code>boolean</code> type. Default: false Group: advanced
        Parameters:
        connectionStateDisabled - the value to set
        Returns:
        the dsl builder

      • connectionTimeToLive

        default HttpComponentBuilderFactory.HttpComponentBuilder connectionTimeToLive​(long connectionTimeToLive)
        The time for connection to live, the time unit is millisecond, the default value is always keep alive. The option is a: <code>long</code> type. Group: advanced
        Parameters:
        connectionTimeToLive - the value to set
        Returns:
        the dsl builder

      • contentCompressionDisabled

        default HttpComponentBuilderFactory.HttpComponentBuilder contentCompressionDisabled​(boolean contentCompressionDisabled)
        Disables automatic content decompression. The option is a: <code>boolean</code> type. Default: false Group: advanced
        Parameters:
        contentCompressionDisabled - the value to set
        Returns:
        the dsl builder

      • cookieManagementDisabled

        default HttpComponentBuilderFactory.HttpComponentBuilder cookieManagementDisabled​(boolean cookieManagementDisabled)
        Disables state (cookie) management. The option is a: <code>boolean</code> type. Default: false Group: advanced
        Parameters:
        cookieManagementDisabled - the value to set
        Returns:
        the dsl builder

      • defaultUserAgentDisabled

        default HttpComponentBuilderFactory.HttpComponentBuilder defaultUserAgentDisabled​(boolean defaultUserAgentDisabled)
        Disables the default user agent set by this builder if none has been provided by the user. The option is a: <code>boolean</code> type. Default: false Group: advanced
        Parameters:
        defaultUserAgentDisabled - the value to set
        Returns:
        the dsl builder

      • httpBinding

        default HttpComponentBuilderFactory.HttpComponentBuilder httpBinding​(org.apache.camel.http.common.HttpBinding httpBinding)
        To use a custom HttpBinding to control the mapping between Camel message and HttpClient. The option is a: <code>org.apache.camel.http.common.HttpBinding</code> type. Group: advanced
        Parameters:
        httpBinding - the value to set
        Returns:
        the dsl builder

      • httpClientConfigurer

        default HttpComponentBuilderFactory.HttpComponentBuilder httpClientConfigurer​(org.apache.camel.component.http.HttpClientConfigurer httpClientConfigurer)
        To use the custom HttpClientConfigurer to perform configuration of the HttpClient that will be used. The option is a: <code>org.apache.camel.component.http.HttpClientConfigurer</code> type. Group: advanced
        Parameters:
        httpClientConfigurer - the value to set
        Returns:
        the dsl builder

      • httpConfiguration

        default HttpComponentBuilderFactory.HttpComponentBuilder httpConfiguration​(org.apache.camel.http.common.HttpConfiguration httpConfiguration)
        To use the shared HttpConfiguration as base configuration. The option is a: <code>org.apache.camel.http.common.HttpConfiguration</code> type. Group: advanced
        Parameters:
        httpConfiguration - the value to set
        Returns:
        the dsl builder

      • httpContext

        default HttpComponentBuilderFactory.HttpComponentBuilder httpContext​(org.apache.http.protocol.HttpContext httpContext)
        To use a custom org.apache.http.protocol.HttpContext when executing requests. The option is a: <code>org.apache.http.protocol.HttpContext</code> type. Group: advanced
        Parameters:
        httpContext - the value to set
        Returns:
        the dsl builder

      • maxTotalConnections

        default HttpComponentBuilderFactory.HttpComponentBuilder maxTotalConnections​(int maxTotalConnections)
        The maximum number of connections. The option is a: <code>int</code> type. Default: 200 Group: advanced
        Parameters:
        maxTotalConnections - the value to set
        Returns:
        the dsl builder

      • redirectHandlingDisabled

        default HttpComponentBuilderFactory.HttpComponentBuilder redirectHandlingDisabled​(boolean redirectHandlingDisabled)
        Disables automatic redirect handling. The option is a: <code>boolean</code> type. Default: false Group: advanced
        Parameters:
        redirectHandlingDisabled - the value to set
        Returns:
        the dsl builder

      • headerFilterStrategy

        default HttpComponentBuilderFactory.HttpComponentBuilder headerFilterStrategy​(org.apache.camel.spi.HeaderFilterStrategy headerFilterStrategy)
        To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message. The option is a: <code>org.apache.camel.spi.HeaderFilterStrategy</code> type. Group: filter
        Parameters:
        headerFilterStrategy - the value to set
        Returns:
        the dsl builder

      • proxyAuthDomain

        default HttpComponentBuilderFactory.HttpComponentBuilder proxyAuthDomain​(String proxyAuthDomain)
        Proxy authentication domain to use. The option is a: <code>java.lang.String</code> type. Group: proxy
        Parameters:
        proxyAuthDomain - the value to set
        Returns:
        the dsl builder

      • proxyAuthHost

        default HttpComponentBuilderFactory.HttpComponentBuilder proxyAuthHost​(String proxyAuthHost)
        Proxy authentication host. The option is a: <code>java.lang.String</code> type. Group: proxy
        Parameters:
        proxyAuthHost - the value to set
        Returns:
        the dsl builder

      • proxyAuthMethod

        default HttpComponentBuilderFactory.HttpComponentBuilder proxyAuthMethod​(String proxyAuthMethod)
        Proxy authentication method to use. The option is a: <code>java.lang.String</code> type. Group: proxy
        Parameters:
        proxyAuthMethod - the value to set
        Returns:
        the dsl builder

      • proxyAuthNtHost

        default HttpComponentBuilderFactory.HttpComponentBuilder proxyAuthNtHost​(String proxyAuthNtHost)
        Proxy authentication domain (workstation name) to use with NTML. The option is a: <code>java.lang.String</code> type. Group: proxy
        Parameters:
        proxyAuthNtHost - the value to set
        Returns:
        the dsl builder

      • proxyAuthPassword

        default HttpComponentBuilderFactory.HttpComponentBuilder proxyAuthPassword​(String proxyAuthPassword)
        Proxy authentication password. The option is a: <code>java.lang.String</code> type. Group: proxy
        Parameters:
        proxyAuthPassword - the value to set
        Returns:
        the dsl builder

      • proxyAuthPort

        default HttpComponentBuilderFactory.HttpComponentBuilder proxyAuthPort​(Integer proxyAuthPort)
        Proxy authentication port. The option is a: <code>java.lang.Integer</code> type. Group: proxy
        Parameters:
        proxyAuthPort - the value to set
        Returns:
        the dsl builder

      • proxyAuthUsername

        default HttpComponentBuilderFactory.HttpComponentBuilder proxyAuthUsername​(String proxyAuthUsername)
        Proxy authentication username. The option is a: <code>java.lang.String</code> type. Group: proxy
        Parameters:
        proxyAuthUsername - the value to set
        Returns:
        the dsl builder

      • sslContextParameters

        default HttpComponentBuilderFactory.HttpComponentBuilder sslContextParameters​(org.apache.camel.support.jsse.SSLContextParameters sslContextParameters)
        To configure security using SSLContextParameters. Important: Only one instance of org.apache.camel.support.jsse.SSLContextParameters is supported per HttpComponent. If you need to use 2 or more different instances, you need to define a new HttpComponent per instance you need. The option is a: <code>org.apache.camel.support.jsse.SSLContextParameters</code> type. Group: security
        Parameters:
        sslContextParameters - the value to set
        Returns:
        the dsl builder

      • useGlobalSslContextParameters

        default HttpComponentBuilderFactory.HttpComponentBuilder useGlobalSslContextParameters​(boolean useGlobalSslContextParameters)
        Enable usage of global SSL context parameters. The option is a: <code>boolean</code> type. Default: false Group: security
        Parameters:
        useGlobalSslContextParameters - the value to set
        Returns:
        the dsl builder

      • x509HostnameVerifier

        default HttpComponentBuilderFactory.HttpComponentBuilder x509HostnameVerifier​(HostnameVerifier x509HostnameVerifier)
        To use a custom X509HostnameVerifier such as DefaultHostnameVerifier or NoopHostnameVerifier. The option is a: <code>javax.net.ssl.HostnameVerifier</code> type. Group: security
        Parameters:
        x509HostnameVerifier - the value to set
        Returns:
        the dsl builder

      • connectionRequestTimeout

        default HttpComponentBuilderFactory.HttpComponentBuilder connectionRequestTimeout​(int connectionRequestTimeout)
        The timeout in milliseconds used when requesting a connection from the connection manager. A timeout value of zero is interpreted as an infinite timeout. A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default). The option is a: <code>int</code> type. Default: -1 Group: timeout
        Parameters:
        connectionRequestTimeout - the value to set
        Returns:
        the dsl builder

      • connectTimeout

        default HttpComponentBuilderFactory.HttpComponentBuilder connectTimeout​(int connectTimeout)
        Determines the timeout in milliseconds until a connection is established. A timeout value of zero is interpreted as an infinite timeout. A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default). The option is a: <code>int</code> type. Default: -1 Group: timeout
        Parameters:
        connectTimeout - the value to set
        Returns:
        the dsl builder

      • socketTimeout

        default HttpComponentBuilderFactory.HttpComponentBuilder socketTimeout​(int socketTimeout)
        Defines the socket timeout in milliseconds, which is the timeout for waiting for data or, put differently, a maximum period inactivity between two consecutive data packets). A timeout value of zero is interpreted as an infinite timeout. A negative value is interpreted as undefined (system default). The option is a: <code>int</code> type. Default: -1 Group: timeout
        Parameters:
        socketTimeout - the value to set
        Returns:
        the dsl builder