Package org.apache.camel.builder.component.dsl

Interface SmppComponentBuilderFactory.SmppComponentBuilder

All Superinterfaces:
ComponentBuilder<org.apache.camel.component.smpp.SmppComponent>
All Known Implementing Classes:
SmppComponentBuilderFactory.SmppComponentBuilderImpl
Enclosing interface:
SmppComponentBuilderFactory
public static interface SmppComponentBuilderFactory.SmppComponentBuilder extends ComponentBuilder<org.apache.camel.component.smpp.SmppComponent>
Builder for the SMPP component.

  • Method Details

    • initialReconnectDelay

      default SmppComponentBuilderFactory.SmppComponentBuilder initialReconnectDelay(long initialReconnectDelay)
      Defines the initial delay in milliseconds after the consumer/producer tries to reconnect to the SMSC, after the connection was lost. The option is a: <code>long</code> type. Default: 5000 Group: common
      Parameters:
      initialReconnectDelay - the value to set
      Returns:
      the dsl builder

    • maxReconnect

      default SmppComponentBuilderFactory.SmppComponentBuilder maxReconnect(int maxReconnect)
      Defines the maximum number of attempts to reconnect to the SMSC, if SMSC returns a negative bind response. The option is a: <code>int</code> type. Default: 2147483647 Group: common
      Parameters:
      maxReconnect - the value to set
      Returns:
      the dsl builder

    • reconnectDelay

      default SmppComponentBuilderFactory.SmppComponentBuilder reconnectDelay(long reconnectDelay)
      Defines the interval in milliseconds between the reconnect attempts, if the connection to the SMSC was lost and the previous was not succeed. The option is a: <code>long</code> type. Default: 5000 Group: common
      Parameters:
      reconnectDelay - the value to set
      Returns:
      the dsl builder

    • splittingPolicy

      default SmppComponentBuilderFactory.SmppComponentBuilder splittingPolicy(org.apache.camel.component.smpp.SmppSplittingPolicy splittingPolicy)
      You can specify a policy for handling long messages: ALLOW - the default, long messages are split to 140 bytes per message TRUNCATE - long messages are split and only the first fragment will be sent to the SMSC. Some carriers drop subsequent fragments so this reduces load on the SMPP connection sending parts of a message that will never be delivered. REJECT - if a message would need to be split, it is rejected with an SMPP NegativeResponseException and the reason code signifying the message is too long. The option is a: <code>org.apache.camel.component.smpp.SmppSplittingPolicy</code> type. Default: ALLOW Group: common
      Parameters:
      splittingPolicy - the value to set
      Returns:
      the dsl builder

    • systemType

      default SmppComponentBuilderFactory.SmppComponentBuilder systemType(String systemType)
      This parameter is used to categorize the type of ESME (External Short Message Entity) that is binding to the SMSC (max. 13 characters). The option is a: <code>java.lang.String</code> type. Group: common
      Parameters:
      systemType - the value to set
      Returns:
      the dsl builder

    • addressRange

      default SmppComponentBuilderFactory.SmppComponentBuilder addressRange(String addressRange)
      You can specify the address range for the SmppConsumer as defined in section 5.2.7 of the SMPP 3.4 specification. The SmppConsumer will receive messages only from SMSC's which target an address (MSISDN or IP address) within this range. The option is a: <code>java.lang.String</code> type. Group: consumer
      Parameters:
      addressRange - the value to set
      Returns:
      the dsl builder

    • bridgeErrorHandler

      default SmppComponentBuilderFactory.SmppComponentBuilder bridgeErrorHandler(boolean bridgeErrorHandler)
      Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. The option is a: <code>boolean</code> type. Default: false Group: consumer
      Parameters:
      bridgeErrorHandler - the value to set
      Returns:
      the dsl builder

    • destAddr

      default SmppComponentBuilderFactory.SmppComponentBuilder destAddr(String destAddr)
      Defines the destination SME address. For mobile terminated messages, this is the directory number of the recipient MS. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The option is a: <code>java.lang.String</code> type. Default: 1717 Group: producer
      Parameters:
      destAddr - the value to set
      Returns:
      the dsl builder

    • destAddrNpi

      default SmppComponentBuilderFactory.SmppComponentBuilder destAddrNpi(byte destAddrNpi)
      Defines the type of number (TON) to be used in the SME destination address parameters. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option is a: <code>byte</code> type. Group: producer
      Parameters:
      destAddrNpi - the value to set
      Returns:
      the dsl builder

    • destAddrTon

      default SmppComponentBuilderFactory.SmppComponentBuilder destAddrTon(byte destAddrTon)
      Defines the type of number (TON) to be used in the SME destination address parameters. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option is a: <code>byte</code> type. Group: producer
      Parameters:
      destAddrTon - the value to set
      Returns:
      the dsl builder

    • lazySessionCreation

      default SmppComponentBuilderFactory.SmppComponentBuilder lazySessionCreation(boolean lazySessionCreation)
      Sessions can be lazily created to avoid exceptions, if the SMSC is not available when the Camel producer is started. Camel will check the in message headers 'CamelSmppSystemId' and 'CamelSmppPassword' of the first exchange. If they are present, Camel will use these data to connect to the SMSC. The option is a: <code>boolean</code> type. Default: false Group: producer
      Parameters:
      lazySessionCreation - the value to set
      Returns:
      the dsl builder

    • lazyStartProducer

      default SmppComponentBuilderFactory.SmppComponentBuilder lazyStartProducer(boolean lazyStartProducer)
      Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. The option is a: <code>boolean</code> type. Default: false Group: producer
      Parameters:
      lazyStartProducer - the value to set
      Returns:
      the dsl builder

    • messageReceiverRouteId

      default SmppComponentBuilderFactory.SmppComponentBuilder messageReceiverRouteId(String messageReceiverRouteId)
      Set this on producer in order to benefit from transceiver (TRX) binding type. So once set, you don't need to define an 'SMTPP consumer' endpoint anymore. You would set this to a 'Direct consumer' endpoint instead. DISCALIMER: This feature is only tested with 'Direct consumer' endpoint. The behavior with any other consumer type is unknown and not tested. The option is a: <code>java.lang.String</code> type. Group: producer
      Parameters:
      messageReceiverRouteId - the value to set
      Returns:
      the dsl builder

    • numberingPlanIndicator

      default SmppComponentBuilderFactory.SmppComponentBuilder numberingPlanIndicator(byte numberingPlanIndicator)
      Defines the numeric plan indicator (NPI) to be used in the SME. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option is a: <code>byte</code> type. Group: producer
      Parameters:
      numberingPlanIndicator - the value to set
      Returns:
      the dsl builder

    • priorityFlag

      default SmppComponentBuilderFactory.SmppComponentBuilder priorityFlag(byte priorityFlag)
      Allows the originating SME to assign a priority level to the short message. Only for SubmitSm and SubmitMulti. Four Priority Levels are supported: 0: Level 0 (lowest) priority 1: Level 1 priority 2: Level 2 priority 3: Level 3 (highest) priority. The option is a: <code>byte</code> type. Group: producer
      Parameters:
      priorityFlag - the value to set
      Returns:
      the dsl builder

    • protocolId

      default SmppComponentBuilderFactory.SmppComponentBuilder protocolId(byte protocolId)
      The protocol id. The option is a: <code>byte</code> type. Group: producer
      Parameters:
      protocolId - the value to set
      Returns:
      the dsl builder

    • registeredDelivery

      default SmppComponentBuilderFactory.SmppComponentBuilder registeredDelivery(byte registeredDelivery)
      Is used to request an SMSC delivery receipt and/or SME originated acknowledgements. The following values are defined: 0: No SMSC delivery receipt requested. 1: SMSC delivery receipt requested where final delivery outcome is success or failure. 2: SMSC delivery receipt requested where the final delivery outcome is delivery failure. The option is a: <code>byte</code> type. Group: producer
      Parameters:
      registeredDelivery - the value to set
      Returns:
      the dsl builder

    • replaceIfPresentFlag

      default SmppComponentBuilderFactory.SmppComponentBuilder replaceIfPresentFlag(byte replaceIfPresentFlag)
      Used to request the SMSC to replace a previously submitted message, that is still pending delivery. The SMSC will replace an existing message provided that the source address, destination address and service type match the same fields in the new message. The following replace if present flag values are defined: 0: Don't replace 1: Replace. The option is a: <code>byte</code> type. Group: producer
      Parameters:
      replaceIfPresentFlag - the value to set
      Returns:
      the dsl builder

    • serviceType

      default SmppComponentBuilderFactory.SmppComponentBuilder serviceType(String serviceType)
      The service type parameter can be used to indicate the SMS Application service associated with the message. The following generic service_types are defined: CMT: Cellular Messaging CPT: Cellular Paging VMN: Voice Mail Notification VMA: Voice Mail Alerting WAP: Wireless Application Protocol USSD: Unstructured Supplementary Services Data. The option is a: <code>java.lang.String</code> type. Group: producer
      Parameters:
      serviceType - the value to set
      Returns:
      the dsl builder

    • sourceAddr

      default SmppComponentBuilderFactory.SmppComponentBuilder sourceAddr(String sourceAddr)
      Defines the address of SME (Short Message Entity) which originated this message. The option is a: <code>java.lang.String</code> type. Default: 1616 Group: producer
      Parameters:
      sourceAddr - the value to set
      Returns:
      the dsl builder

    • sourceAddrNpi

      default SmppComponentBuilderFactory.SmppComponentBuilder sourceAddrNpi(byte sourceAddrNpi)
      Defines the numeric plan indicator (NPI) to be used in the SME originator address parameters. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option is a: <code>byte</code> type. Group: producer
      Parameters:
      sourceAddrNpi - the value to set
      Returns:
      the dsl builder

    • sourceAddrTon

      default SmppComponentBuilderFactory.SmppComponentBuilder sourceAddrTon(byte sourceAddrTon)
      Defines the type of number (TON) to be used in the SME originator address parameters. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option is a: <code>byte</code> type. Group: producer
      Parameters:
      sourceAddrTon - the value to set
      Returns:
      the dsl builder

    • typeOfNumber

      default SmppComponentBuilderFactory.SmppComponentBuilder typeOfNumber(byte typeOfNumber)
      Defines the type of number (TON) to be used in the SME. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option is a: <code>byte</code> type. Group: producer
      Parameters:
      typeOfNumber - the value to set
      Returns:
      the dsl builder

    • autowiredEnabled

      default SmppComponentBuilderFactory.SmppComponentBuilder autowiredEnabled(boolean autowiredEnabled)
      Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. The option is a: <code>boolean</code> type. Default: true Group: advanced
      Parameters:
      autowiredEnabled - the value to set
      Returns:
      the dsl builder

    • configuration

      default SmppComponentBuilderFactory.SmppComponentBuilder configuration(org.apache.camel.component.smpp.SmppConfiguration configuration)
      To use the shared SmppConfiguration as configuration. The option is a: <code>org.apache.camel.component.smpp.SmppConfiguration</code> type. Group: advanced
      Parameters:
      configuration - the value to set
      Returns:
      the dsl builder

    • enquireLinkTimer

      default SmppComponentBuilderFactory.SmppComponentBuilder enquireLinkTimer(Integer enquireLinkTimer)
      Defines the interval in milliseconds between the confidence checks. The confidence check is used to test the communication path between an ESME and an SMSC. The option is a: <code>java.lang.Integer</code> type. Default: 60000 Group: advanced
      Parameters:
      enquireLinkTimer - the value to set
      Returns:
      the dsl builder

    • pduProcessorDegree

      default SmppComponentBuilderFactory.SmppComponentBuilder pduProcessorDegree(Integer pduProcessorDegree)
      Sets the number of threads which can read PDU and process them in parallel. The option is a: <code>java.lang.Integer</code> type. Default: 3 Group: advanced
      Parameters:
      pduProcessorDegree - the value to set
      Returns:
      the dsl builder

    • pduProcessorQueueCapacity

      default SmppComponentBuilderFactory.SmppComponentBuilder pduProcessorQueueCapacity(Integer pduProcessorQueueCapacity)
      Sets the capacity of the working queue for PDU processing. The option is a: <code>java.lang.Integer</code> type. Default: 100 Group: advanced
      Parameters:
      pduProcessorQueueCapacity - the value to set
      Returns:
      the dsl builder

    • sessionStateListener

      default SmppComponentBuilderFactory.SmppComponentBuilder sessionStateListener(org.jsmpp.session.SessionStateListener sessionStateListener)
      You can refer to a org.jsmpp.session.SessionStateListener in the Registry to receive callbacks when the session state changed. The option is a: <code>org.jsmpp.session.SessionStateListener</code> type. Group: advanced
      Parameters:
      sessionStateListener - the value to set
      Returns:
      the dsl builder

    • singleDLR

      default SmppComponentBuilderFactory.SmppComponentBuilder singleDLR(boolean singleDLR)
      When true, the SMSC delivery receipt would be requested only for the last segment of a multi-segment (long) message. For short messages, with only 1 segment the behaviour is unchanged. The option is a: <code>boolean</code> type. Default: false Group: advanced
      Parameters:
      singleDLR - the value to set
      Returns:
      the dsl builder

    • transactionTimer

      default SmppComponentBuilderFactory.SmppComponentBuilder transactionTimer(Integer transactionTimer)
      Defines the maximum period of inactivity allowed after a transaction, after which an SMPP entity may assume that the session is no longer active. This timer may be active on either communicating SMPP entity (i.e. SMSC or ESME). The option is a: <code>java.lang.Integer</code> type. Default: 10000 Group: advanced
      Parameters:
      transactionTimer - the value to set
      Returns:
      the dsl builder

    • alphabet

      default SmppComponentBuilderFactory.SmppComponentBuilder alphabet(byte alphabet)
      Defines encoding of data according the SMPP 3.4 specification, section 5.2.19. 0: SMSC Default Alphabet 4: 8 bit Alphabet 8: UCS2 Alphabet. The option is a: <code>byte</code> type. Group: codec
      Parameters:
      alphabet - the value to set
      Returns:
      the dsl builder

    • dataCoding

      default SmppComponentBuilderFactory.SmppComponentBuilder dataCoding(byte dataCoding)
      Defines the data coding according the SMPP 3.4 specification, section 5.2.19. Example data encodings are: 0: SMSC Default Alphabet 3: Latin 1 (ISO-8859-1) 4: Octet unspecified (8-bit binary) 8: UCS2 (ISO/IEC-10646) 13: Extended Kanji JIS(X 0212-1990). The option is a: <code>byte</code> type. Group: codec
      Parameters:
      dataCoding - the value to set
      Returns:
      the dsl builder

    • encoding

      default SmppComponentBuilderFactory.SmppComponentBuilder encoding(String encoding)
      Defines the encoding scheme of the short message user data. Only for SubmitSm, ReplaceSm and SubmitMulti. The option is a: <code>java.lang.String</code> type. Default: ISO-8859-1 Group: codec
      Parameters:
      encoding - the value to set
      Returns:
      the dsl builder

    • httpProxyHost

      default SmppComponentBuilderFactory.SmppComponentBuilder httpProxyHost(String httpProxyHost)
      If you need to tunnel SMPP through a HTTP proxy, set this attribute to the hostname or ip address of your HTTP proxy. The option is a: <code>java.lang.String</code> type. Group: proxy
      Parameters:
      httpProxyHost - the value to set
      Returns:
      the dsl builder

    • httpProxyPassword

      default SmppComponentBuilderFactory.SmppComponentBuilder httpProxyPassword(String httpProxyPassword)
      If your HTTP proxy requires basic authentication, set this attribute to the password required for your HTTP proxy. The option is a: <code>java.lang.String</code> type. Group: proxy
      Parameters:
      httpProxyPassword - the value to set
      Returns:
      the dsl builder

    • httpProxyPort

      default SmppComponentBuilderFactory.SmppComponentBuilder httpProxyPort(Integer httpProxyPort)
      If you need to tunnel SMPP through a HTTP proxy, set this attribute to the port of your HTTP proxy. The option is a: <code>java.lang.Integer</code> type. Default: 3128 Group: proxy
      Parameters:
      httpProxyPort - the value to set
      Returns:
      the dsl builder

    • httpProxyUsername

      default SmppComponentBuilderFactory.SmppComponentBuilder httpProxyUsername(String httpProxyUsername)
      If your HTTP proxy requires basic authentication, set this attribute to the username required for your HTTP proxy. The option is a: <code>java.lang.String</code> type. Group: proxy
      Parameters:
      httpProxyUsername - the value to set
      Returns:
      the dsl builder

    • proxyHeaders

      default SmppComponentBuilderFactory.SmppComponentBuilder proxyHeaders(Map<String,String> proxyHeaders)
      These headers will be passed to the proxy server while establishing the connection. The option is a: <code>java.util.Map&lt;java.lang.String, java.lang.String&gt;</code> type. Group: proxy
      Parameters:
      proxyHeaders - the value to set
      Returns:
      the dsl builder

    • password

      default SmppComponentBuilderFactory.SmppComponentBuilder password(String password)
      The password for connecting to SMSC server. The option is a: <code>java.lang.String</code> type. Group: security
      Parameters:
      password - the value to set
      Returns:
      the dsl builder

    • systemId

      default SmppComponentBuilderFactory.SmppComponentBuilder systemId(String systemId)
      The system id (username) for connecting to SMSC server. The option is a: <code>java.lang.String</code> type. Default: smppclient Group: security
      Parameters:
      systemId - the value to set
      Returns:
      the dsl builder

    • usingSSL

      default SmppComponentBuilderFactory.SmppComponentBuilder usingSSL(boolean usingSSL)
      Whether using SSL with the smpps protocol. The option is a: <code>boolean</code> type. Default: false Group: security
      Parameters:
      usingSSL - the value to set
      Returns:
      the dsl builder