Class SimpleCacheImpl<K,​V>

  • All Implemented Interfaces:
    ConcurrentMap<K,​V>, Map<K,​V>, AdvancedCache<K,​V>, Cache<K,​V>, org.infinispan.commons.api.AsyncCache<K,​V>, org.infinispan.commons.api.BasicCache<K,​V>, org.infinispan.commons.api.BatchingCache, org.infinispan.commons.api.Lifecycle, org.infinispan.commons.api.TransactionalCache, FilteringListenable<K,​V>, Listenable
    Direct Known Subclasses:
    StatsCollectingCache

    @MBean(objectName="Cache",
           description="Component that represents a simplified cache instance.")
    public class SimpleCacheImpl<K,​V>
    extends Object
    implements AdvancedCache<K,​V>
    Simple local cache without interceptor stack. The cache still implements AdvancedCache since it is too troublesome to omit that.
    Author:
    Radim Vansa <[email protected]>
    • Constructor Detail

      • SimpleCacheImpl

        public SimpleCacheImpl​(String cacheName)
    • Method Detail

      • start

        @ManagedOperation(description="Starts the cache.",
                          displayName="Starts cache.")
        public void start()
        Specified by:
        start in interface org.infinispan.commons.api.Lifecycle
      • stop

        @ManagedOperation(description="Stops the cache.",
                          displayName="Stops cache.")
        public void stop()
        Description copied from interface: Cache
        Stops a cache. If the cache is clustered, this only stops the cache on the node where it is being invoked. If you need to stop the cache across a cluster, use the Cache.shutdown() method.
        Specified by:
        stop in interface Cache<K,​V>
        Specified by:
        stop in interface org.infinispan.commons.api.Lifecycle
      • putForExternalRead

        public void putForExternalRead​(K key,
                                       V value)
        Description copied from interface: Cache
        Under special operating behavior, associates the value with the specified key.
        • Only goes through if the key specified does not exist; no-op otherwise (similar to ConcurrentMap.putIfAbsent(Object, Object))
        • Force asynchronous mode for replication to prevent any blocking.
        • invalidation does not take place.
        • 0ms lock timeout to prevent any blocking here either. If the lock is not acquired, this method is a no-op, and swallows the timeout exception.
        • Ongoing transactions are suspended before this call, so failures here will not affect any ongoing transactions.
        • Errors and exceptions are 'silent' - logged at a much lower level than normal, and this method does not throw exceptions
        This method is for caching data that has an external representation in storage, where, concurrent modification and transactions are not a consideration, and failure to put the data in the cache should be treated as a 'suboptimal outcome' rather than a 'failing outcome'.

        An example of when this method is useful is when data is read from, for example, a legacy datastore, and is cached before returning the data to the caller. Subsequent calls would prefer to get the data from the cache and if the data doesn't exist in the cache, fetch again from the legacy datastore.

        See JBCACHE-848 for details around this feature.

        Specified by:
        putForExternalRead in interface Cache<K,​V>
        Parameters:
        key - key with which the specified value is to be associated.
        value - value to be associated with the specified key.
      • putForExternalRead

        public void putForExternalRead​(K key,
                                       V value,
                                       long lifespan,
                                       TimeUnit unit)
        Description copied from interface: Cache
        An overloaded form of #putForExternalRead(K, V), which takes in lifespan parameters.
        Specified by:
        putForExternalRead in interface Cache<K,​V>
        Parameters:
        key - key to use
        value - value to store
        lifespan - lifespan of the entry. Negative values are interpreted as unlimited lifespan.
        unit - unit of measurement for the lifespan
      • putForExternalRead

        public void putForExternalRead​(K key,
                                       V value,
                                       long lifespan,
                                       TimeUnit lifespanUnit,
                                       long maxIdle,
                                       TimeUnit maxIdleUnit)
        Description copied from interface: Cache
        An overloaded form of #putForExternalRead(K, V), which takes in lifespan parameters.
        Specified by:
        putForExternalRead in interface Cache<K,​V>
        Parameters:
        key - key to use
        value - value to store
        lifespan - lifespan of the entry. Negative values are interpreted as unlimited lifespan.
        lifespanUnit - time unit for lifespan
        maxIdle - the maximum amount of time this key is allowed to be idle for before it is considered as expired
        maxIdleUnit - time unit for max idle time
      • putForExternalRead

        public void putForExternalRead​(K key,
                                       V value,
                                       Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of #putForExternalRead(K, V), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        putForExternalRead in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is to be associated
        value - value to be associated with the specified key
        metadata - information to store alongside the new value
      • putForExternalReadInternal

        protected void putForExternalReadInternal​(K key,
                                                  V value,
                                                  Metadata metadata,
                                                  org.infinispan.commons.util.ByRef.Boolean isCreatedRef)
      • getAll

        public Map<K,​V> getAll​(Set<?> keys)
        Description copied from interface: AdvancedCache
        Gets a collection of entries, returning them as Map of the values associated with the set of keys requested.

        If the cache is configured read-through, and a get for a key would return null because an entry is missing from the cache, the Cache's CacheLoader is called in an attempt to load the entry. If an entry cannot be loaded for a given key, the returned Map will contain null for value of the key.

        Unlike other bulk methods if this invoked in an existing transaction all entries will be stored in the current transactional context

        The returned Map will be a copy and updates to the map will not be reflected in the Cache and vice versa. The keys and values themselves however may not be copies depending on if storeAsBinary is enabled and the value was retrieved from the local node.

        Specified by:
        getAll in interface AdvancedCache<K,​V>
        Parameters:
        keys - The keys whose associated values are to be returned.
        Returns:
        A map of entries that were found for the given keys. If an entry is not found for a given key, it will not be in the returned map.
      • getAllAsync

        public CompletableFuture<Map<K,​V>> getAllAsync​(Set<?> keys)
        Specified by:
        getAllAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • getCacheEntry

        public CacheEntry<K,​V> getCacheEntry​(Object k)
        Description copied from interface: AdvancedCache
        Retrieves a CacheEntry corresponding to a specific key.
        Specified by:
        getCacheEntry in interface AdvancedCache<K,​V>
        Parameters:
        k - the key whose associated cache entry is to be returned
        Returns:
        the cache entry to which the specified key is mapped, or null if this map contains no mapping for the key
      • getCacheEntryAsync

        public CompletableFuture<CacheEntry<K,​V>> getCacheEntryAsync​(Object key)
        Description copied from interface: AdvancedCache
        Retrieves a CacheEntry corresponding to a specific key.
        Specified by:
        getCacheEntryAsync in interface AdvancedCache<K,​V>
        Parameters:
        key - the key whose associated cache entry is to be returned
        Returns:
        a future with the cache entry to which the specified key is mapped, or with null if this map contains no mapping for the key
      • getAllCacheEntries

        public Map<K,​CacheEntry<K,​V>> getAllCacheEntries​(Set<?> keys)
        Description copied from interface: AdvancedCache
        Gets a collection of entries from the AdvancedCache, returning them as Map of the cache entries associated with the set of keys requested.

        If the cache is configured read-through, and a get for a key would return null because an entry is missing from the cache, the Cache's CacheLoader is called in an attempt to load the entry. If an entry cannot be loaded for a given key, the returned Map will contain null for value of the key.

        Unlike other bulk methods if this invoked in an existing transaction all entries will be stored in the current transactional context

        The returned Map will be a copy and updates to the map will not be reflected in the Cache and vice versa. The keys and values themselves however may not be copies depending on if storeAsBinary is enabled and the value was retrieved from the local node.

        Specified by:
        getAllCacheEntries in interface AdvancedCache<K,​V>
        Parameters:
        keys - The keys whose associated values are to be returned.
        Returns:
        A map of entries that were found for the given keys. Keys not found in the cache are present in the map with null values.
      • computeAsync

        public CompletableFuture<V> computeAsync​(K key,
                                                 BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                                                 Metadata metadata)
        Description copied from interface: AdvancedCache
        Overloaded #computeAsync(K, BiFunction), which stores metadata alongside the value. This method does not block on remote calls, even if your cache mode is synchronous.
        Specified by:
        computeAsync in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is associated
        remappingFunction - function to be applied to the specified key/value
        metadata - information to store alongside the new value
        Returns:
        the previous value associated with the specified key, or null if remapping function is gives null.
      • computeIfPresentAsync

        public CompletableFuture<V> computeIfPresentAsync​(K key,
                                                          BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                                                          Metadata metadata)
        Description copied from interface: AdvancedCache
        Overloaded #computeIfPresentAsync(K, BiFunction), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        computeIfPresentAsync in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is associated
        remappingFunction - function to be applied to the specified key/value
        metadata - information to store alongside the new value
        Returns:
        the previous value associated with the specified key, or null if there was no mapping for the key.
      • computeIfAbsentAsync

        public CompletableFuture<V> computeIfAbsentAsync​(K key,
                                                         Function<? super K,​? extends V> mappingFunction,
                                                         Metadata metadata)
        Description copied from interface: AdvancedCache
        Overloaded #computeIfAbsentAsync(K, Function), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        computeIfAbsentAsync in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is associated
        mappingFunction - function to be applied to the specified key
        metadata - information to store alongside the new value
        Returns:
        the value created with the mapping function associated with the specified key, or the previous value associated with the specified key if the key is not absent.
      • mergeAsync

        public CompletableFuture<V> mergeAsync​(K key,
                                               V value,
                                               BiFunction<? super V,​? super V,​? extends V> remappingFunction,
                                               long lifespan,
                                               TimeUnit lifespanUnit)
        Specified by:
        mergeAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • mergeAsync

        public CompletableFuture<V> mergeAsync​(K key,
                                               V value,
                                               BiFunction<? super V,​? super V,​? extends V> remappingFunction,
                                               long lifespan,
                                               TimeUnit lifespanUnit,
                                               long maxIdleTime,
                                               TimeUnit maxIdleTimeUnit)
        Specified by:
        mergeAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • mergeAsync

        public CompletableFuture<V> mergeAsync​(K key,
                                               V value,
                                               BiFunction<? super V,​? super V,​? extends V> remappingFunction,
                                               Metadata metadata)
        Description copied from interface: AdvancedCache
        Overloaded AsyncCache.mergeAsync(Object, Object, BiFunction), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        mergeAsync in interface AdvancedCache<K,​V>
        Parameters:
        key - , key with which the resulting value is to be associated
        value - , the non-null value to be merged with the existing value associated with the key or, if no existing value or a null value is associated with the key, to be associated with the key
        remappingFunction - , the function to recompute a value if present
        metadata - , information to store alongside the new value
        Returns:
        the new value associated with the specified key, or null if no value is associated with the key
      • computeAsync

        public CompletableFuture<V> computeAsync​(K key,
                                                 BiFunction<? super K,​? super V,​? extends V> remappingFunction)
        Specified by:
        computeAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • computeAsync

        public CompletableFuture<V> computeAsync​(K key,
                                                 BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                                                 long lifespan,
                                                 TimeUnit lifespanUnit)
        Specified by:
        computeAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • computeAsync

        public CompletableFuture<V> computeAsync​(K key,
                                                 BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                                                 long lifespan,
                                                 TimeUnit lifespanUnit,
                                                 long maxIdle,
                                                 TimeUnit maxIdleUnit)
        Specified by:
        computeAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • computeIfAbsentAsync

        public CompletableFuture<V> computeIfAbsentAsync​(K key,
                                                         Function<? super K,​? extends V> mappingFunction)
        Specified by:
        computeIfAbsentAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • computeIfAbsentAsync

        public CompletableFuture<V> computeIfAbsentAsync​(K key,
                                                         Function<? super K,​? extends V> mappingFunction,
                                                         long lifespan,
                                                         TimeUnit lifespanUnit)
        Specified by:
        computeIfAbsentAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • computeIfAbsentAsync

        public CompletableFuture<V> computeIfAbsentAsync​(K key,
                                                         Function<? super K,​? extends V> mappingFunction,
                                                         long lifespan,
                                                         TimeUnit lifespanUnit,
                                                         long maxIdle,
                                                         TimeUnit maxIdleUnit)
        Specified by:
        computeIfAbsentAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • computeIfPresentAsync

        public CompletableFuture<V> computeIfPresentAsync​(K key,
                                                          BiFunction<? super K,​? super V,​? extends V> remappingFunction)
        Specified by:
        computeIfPresentAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • computeIfPresentAsync

        public CompletableFuture<V> computeIfPresentAsync​(K key,
                                                          BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                                                          long lifespan,
                                                          TimeUnit lifespanUnit)
        Specified by:
        computeIfPresentAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • computeIfPresentAsync

        public CompletableFuture<V> computeIfPresentAsync​(K key,
                                                          BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                                                          long lifespan,
                                                          TimeUnit lifespanUnit,
                                                          long maxIdle,
                                                          TimeUnit maxIdleUnit)
        Specified by:
        computeIfPresentAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • mergeAsync

        public CompletableFuture<V> mergeAsync​(K key,
                                               V value,
                                               BiFunction<? super V,​? super V,​? extends V> remappingFunction)
        Specified by:
        mergeAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • getGroup

        public Map<K,​V> getGroup​(String groupName)
        Description copied from interface: AdvancedCache
        It fetches all the keys which belong to the group.

        Semantically, it iterates over all the keys in memory and persistence, and performs a read operation in the keys found. Multiple invocations inside a transaction ensures that all the keys previous read are returned and it may return newly added keys to the group from other committed transactions (also known as phantom reads).

        The map returned is immutable and represents the group at the time of the invocation. If you want to add or remove keys from a group use BasicCache.put(Object, Object) and BasicCache.remove(Object). To remove all the keys in the group use AdvancedCache.removeGroup(String).

        To improve performance you may use the flag Flag.SKIP_CACHE_LOAD to avoid fetching the key/value from persistence. However, you will get an inconsistent snapshot of the group.

        Specified by:
        getGroup in interface AdvancedCache<K,​V>
        Parameters:
        groupName - the group name.
        Returns:
        an immutable Map with the key/value pairs.
      • removeGroup

        public void removeGroup​(String groupName)
        Description copied from interface: AdvancedCache
        It removes all the key which belongs to a group.

        Semantically, it fetches the most recent group keys/values and removes them.

        Note that, concurrent addition perform by other transactions/threads to the group may not be removed.

        Specified by:
        removeGroup in interface AdvancedCache<K,​V>
        Parameters:
        groupName - the group name.
      • touch

        public CompletionStage<Boolean> touch​(Object key,
                                              boolean touchEvenIfExpired)
        Description copied from interface: AdvancedCache
        Touches the given key if present. This will refresh its last access time, used for max idle, and count as a recent access for eviction purposes.

        Note that it is possible to touch an entry that is expired via max idle if touchEvenIfExpired argument is true.

        This method will return without blocking and complete the returned stage with a value after all appropriate nodes have actually touched the value.

        Specified by:
        touch in interface AdvancedCache<K,​V>
        Parameters:
        key - key of the entry to touch
        touchEvenIfExpired - true if the entry should be touched even if already expired via max idle, effectively making it so the entry is no longer expired via max idle
        Returns:
        true if the entry was actually touched
      • touch

        public CompletionStage<Boolean> touch​(Object key,
                                              int segment,
                                              boolean touchEvenIfExpired)
        Description copied from interface: AdvancedCache
        The same as AdvancedCache.touch(Object, boolean) except that the segment is already known. This can be helpful to reduce an extra segment computation
        Specified by:
        touch in interface AdvancedCache<K,​V>
        Parameters:
        key - key of the entry to touch
        segment - segment of the key
        touchEvenIfExpired - true if the entry should be touched even if already expired via max idle, effectively making it so the entry is no longer expired via max idle
        Returns:
        true if the entry was actually touched
      • evict

        public void evict​(K key)
        Description copied from interface: Cache
        Evicts an entry from the memory of the cache. Note that the entry is not removed from any configured cache stores or any other caches in the cluster (if used in a clustered mode). Use BasicCache.remove(Object) to remove an entry from the entire cache system.

        This method is designed to evict an entry from memory to free up memory used by the application. This method uses a 0 lock acquisition timeout so it does not block in attempting to acquire locks. It behaves as a no-op if the lock on the entry cannot be acquired immediately.

        Important: this method should not be called from within a transaction scope.

        Specified by:
        evict in interface Cache<K,​V>
        Parameters:
        key - key to evict
      • getCacheManager

        public EmbeddedCacheManager getCacheManager()
        Description copied from interface: Cache
        Retrieves the cache manager responsible for creating this cache instance.
        Specified by:
        getCacheManager in interface Cache<K,​V>
        Returns:
        a cache manager
      • getCacheStatus

        @ManagedAttribute(description="Returns the cache status",
                          displayName="Cache status",
                          dataType=TRAIT)
        public String getCacheStatus()
      • checkExpiration

        protected boolean checkExpiration​(InternalCacheEntry<K,​V> entry,
                                          long now)
      • size

        public int size()
        Description copied from interface: Cache
        Returns a count of all elements in this cache and cache loader across the entire cluster.

        Only a subset of entries is held in memory at a time when using a loader or remote entries, to prevent possible memory issues, however the loading of said entries can still be vary slow.

        If there are performance concerns then the Flag.SKIP_CACHE_LOAD flag should be used to avoid hitting the cache loader in case if this is not needed in the size calculation.

        Also if you want the local contents only you can use the Flag.CACHE_MODE_LOCAL flag so that other remote nodes are not queried for data. However the loader will still be used unless the previously mentioned Flag.SKIP_CACHE_LOAD is also configured.

        If this method is used in a transactional context, note this method will not bring additional values into the transaction context and thus objects that haven't yet been read will act in a IsolationLevel.READ_COMMITTED behavior irrespective of the configured isolation level. However values that have been previously modified or read that are in the context will be adhered to. e.g. any write modification or any previous read when using IsolationLevel.REPEATABLE_READ

        This method should only be used for debugging purposes such as to verify that the cache contains all the keys entered. Any other use involving execution of this method on a production system is not recommended.

        Specified by:
        size in interface Cache<K,​V>
        Specified by:
        size in interface Map<K,​V>
        Returns:
        the number of key-value mappings in this cache and cache loader across the entire cluster.
      • sizeAsync

        public CompletableFuture<Long> sizeAsync()
        Specified by:
        sizeAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • isEmpty

        public boolean isEmpty()
        Specified by:
        isEmpty in interface Map<K,​V>
      • containsKey

        public boolean containsKey​(Object key)
        Specified by:
        containsKey in interface Map<K,​V>
      • get

        public V get​(Object key)
        Specified by:
        get in interface Map<K,​V>
      • keySet

        public CacheSet<K> keySet()
        Description copied from interface: Cache
        Returns a set view of the keys contained in this cache and cache loader across the entire cluster. Modifications and changes to the cache will be reflected in the set and vice versa. When this method is called nothing is actually queried as the backing set is just returned. Invocation on the set itself is when the various operations are ran.

        Unsupported Operations

        Care should be taken when invoking Set.toArray(), Set.toArray(Object[]), Set.size(), Set.retainAll(Collection) and Set.iterator() methods as they will traverse the entire contents of the cluster including a configured CacheLoader and remote entries. The former 2 methods especially have a very high likely hood of causing a OutOfMemoryError due to storing all the keys in the entire cluster in the array. Use involving execution of this method on a production system is not recommended as they can be quite expensive operations

        Supported Flags

        Note any flag configured for the cache will also be passed along to the backing set when it was created. If additional flags are configured on the cache they will not affect any existing backings sets.

        If there are performance concerns then the Flag.SKIP_CACHE_LOAD flag should be used to avoid hitting the cache store as this will cause all entries there to be read in (albeit in a batched form to prevent OutOfMemoryError)

        Also if you want the local contents only you can use the Flag.CACHE_MODE_LOCAL flag so that other remote nodes are not queried for data. However the loader will still be used unless the previously mentioned Flag.SKIP_CACHE_LOAD is also configured.

        Iterator Use

        This class implements the CloseableIteratorSet interface which creates a CloseableIterator instead of a regular one. This means this iterator must be explicitly closed either through try with resource or calling the close method directly. Technically this iterator will also close itself if you iterate fully over it, but it is safest to always make sure you close it explicitly.

        Unsupported Operations

        Due to not being able to add null values the following methods are not supported and will throw UnsupportedOperationException if invoked. Set.add(Object) Set.addAll(java.util.Collection)
        Specified by:
        keySet in interface Cache<K,​V>
        Specified by:
        keySet in interface Map<K,​V>
        Returns:
        a set view of the keys contained in this cache and cache loader across the entire cluster.
      • values

        public CacheCollection<V> values()
        Description copied from interface: Cache
        Returns a collection view of the values contained in this cache across the entire cluster. Modifications and changes to the cache will be reflected in the set and vice versa. When this method is called nothing is actually queried as the backing collection is just returned. Invocation on the collection itself is when the various operations are ran.

        Care should be taken when invoking Collection.toArray(), Collection.toArray(Object[]), Collection.size(), Collection.retainAll(Collection) and Collection.iterator() methods as they will traverse the entire contents of the cluster including a configured CacheLoader and remote entries. The former 2 methods especially have a very high likely hood of causing a OutOfMemoryError due to storing all the keys in the entire cluster in the array. Use involving execution of this method on a production system is not recommended as they can be quite expensive operations

        *

        Supported Flags

        Note any flag configured for the cache will also be passed along to the backing set when it was created. If additional flags are configured on the cache they will not affect any existing backings sets.

        If there are performance concerns then the Flag.SKIP_CACHE_LOAD flag should be used to avoid hitting the cache store as this will cause all entries there to be read in (albeit in a batched form to prevent OutOfMemoryError)

        Also if you want the local contents only you can use the Flag.CACHE_MODE_LOCAL flag so that other remote nodes are not queried for data. However the loader will still be used unless the previously mentioned Flag.SKIP_CACHE_LOAD is also configured.

        Iterator Use

        This class implements the CloseableIteratorCollection interface which creates a CloseableIterator instead of a regular one. This means this iterator must be explicitly closed either through try with resource or calling the close method directly. Technically this iterator will also close itself if you iterate fully over it, but it is safest to always make sure you close it explicitly.

        The iterator retrieved using CloseableIteratorCollection.iterator() supports the remove method, however the iterator retrieved from CacheStream.iterator() will not support remove.

        Unsupported Operations

        Due to not being able to add null values the following methods are not supported and will throw UnsupportedOperationException if invoked. Set.add(Object) Set.addAll(java.util.Collection)
        Specified by:
        values in interface Cache<K,​V>
        Specified by:
        values in interface Map<K,​V>
        Returns:
        a collection view of the values contained in this cache and cache loader across the entire cluster.
      • entrySet

        public CacheSet<Map.Entry<K,​V>> entrySet()
        Description copied from interface: Cache
        Returns a set view of the mappings contained in this cache and cache loader across the entire cluster. Modifications and changes to the cache will be reflected in the set and vice versa. When this method is called nothing is actually queried as the backing set is just returned. Invocation on the set itself is when the various operations are ran.

        Care should be taken when invoking Set.toArray(), Set.toArray(Object[]), Set.size(), Set.retainAll(Collection) and Set.iterator() methods as they will traverse the entire contents of the cluster including a configured CacheLoader and remote entries. The former 2 methods especially have a very high likely hood of causing a OutOfMemoryError due to storing all the keys in the entire cluster in the array. Use involving execution of this method on a production system is not recommended as they can be quite expensive operations

        *

        Supported Flags

        Note any flag configured for the cache will also be passed along to the backing set when it was created. If additional flags are configured on the cache they will not affect any existing backings sets.

        If there are performance concerns then the Flag.SKIP_CACHE_LOAD flag should be used to avoid hitting the cache store as this will cause all entries there to be read in (albeit in a batched form to prevent OutOfMemoryError)

        Also if you want the local contents only you can use the Flag.CACHE_MODE_LOCAL flag so that other remote nodes are not queried for data. However the loader will still be used unless the previously mentioned Flag.SKIP_CACHE_LOAD is also configured.

        Modifying or Adding Entries

        An entry's value is supported to be modified by using the Map.Entry.setValue(Object) and it will update the cache as well. Also this backing set does allow addition of a new Map.Entry(s) via the Set.add(Object) or Set.addAll(java.util.Collection) methods.

        Iterator Use

        This class implements the CloseableIteratorSet interface which creates a CloseableIterator instead of a regular one. This means this iterator must be explicitly closed either through try with resource or calling the close method directly. Technically this iterator will also close itself if you iterate fully over it, but it is safest to always make sure you close it explicitly.
        Specified by:
        entrySet in interface Cache<K,​V>
        Specified by:
        entrySet in interface Map<K,​V>
        Returns:
        a set view of the mappings contained in this cache and cache loader across the entire cluster.
      • cacheEntrySet

        public CacheSet<CacheEntry<K,​V>> cacheEntrySet()
        Description copied from interface: AdvancedCache
        Identical to Cache.entrySet() but is typed to return CacheEntries instead of Entries. Please see the other method for a description of its behaviors.

        This method is needed since nested generics do not support covariance

        Specified by:
        cacheEntrySet in interface AdvancedCache<K,​V>
        Returns:
        the entry set containing all of the CacheEntries
        See Also:
        Cache.entrySet()
      • lockedStream

        public LockedStream<K,​V> lockedStream()
        Description copied from interface: AdvancedCache
        Returns a sequential stream using this Cache as the source. This stream is very similar to using the CacheStream returned from the CacheCollection.stream() method of the collection returned via AdvancedCache.cacheEntrySet(). The use of this locked stream is that when an entry is being processed by the user the entry is locked for the invocation preventing a different thread from modifying it.

        Note that this stream is not supported when using a optimistic transactional or simple cache. Both non transactional and pessimistic transactional caches are supported.

        The stream will not share any ongoing transaction the user may have. Code executed by the stream should be treated as completely independent. That is any operation performed via the stream will require the user to start their own transaction or will be done intrinsically on the invocation. Note that if there is an ongoing transaction that has a lock on a key from the cache, that it will cause a deadlock.

        Currently simple cache, ConfigurationBuilder.simpleCache(boolean) was set to true, and optimistic caches, TransactionConfigurationBuilder.lockingMode(LockingMode) was set to LockingMode.OPTIMISTIC, do not support this method. In this case it will throw an UnsupportedOperationException. This restriction may be removed in a future version. Also this method cannot be used on a cache that has a lock owner already specified via AdvancedCache.lockAs(Object) as this could lead to a deadlock or the release of locks early and will throw an IllegalStateException.

        Specified by:
        lockedStream in interface AdvancedCache<K,​V>
        Returns:
        the locked stream
      • removeLifespanExpired

        public CompletableFuture<Boolean> removeLifespanExpired​(K key,
                                                                V value,
                                                                Long lifespan)
        Description copied from interface: AdvancedCache
        Attempts to remove the entry if it is expired. Due to expired entries not being consistent across nodes, this will still attempt to remove the value if it is not present. Note that this will raise an expired event even if the entry is not present. Normally this method should never be invoked except by the ExpirationManager.

        This command will only remove the value if the value and lifespan also match if provided.

        This method will suspend any ongoing transaction and start a new one just for the invocation of this command. It is automatically committed or rolled back after the command completes, either successfully or via an exception.

        NOTE: This method may be removed at any point including in a minor release and is not supported for external usage.

        Specified by:
        removeLifespanExpired in interface AdvancedCache<K,​V>
        Parameters:
        key - the key that is expiring
        value - the value that mapped to the given. Null means it will match any value
        lifespan - the lifespan that should match. If null is provided it will match any lifespan value
        Returns:
        if the entry was removed
      • removeMaxIdleExpired

        public CompletableFuture<Boolean> removeMaxIdleExpired​(K key,
                                                               V value)
        Description copied from interface: AdvancedCache
        Attempts to remove the entry for the given key, if it has expired due to max idle. This command first locks the key and then verifies that the entry has expired via maxIdle across all nodes. If it has this will then remove the given key.

        This method returns a boolean when it has determined if the entry has expired. This is useful for when a backup node invokes this command for a get that found the entry expired. This way the node can return back to the caller much faster when the entry is not expired and do any additional processing asynchronously if needed.

        This method will suspend any ongoing transaction and start a new one just for the invocation of this command. It is automatically committed or rolled back after the command completes, either successfully or via an exception.

        NOTE: This method may be removed at any point including in a minor release and is not supported for external usage.

        Specified by:
        removeMaxIdleExpired in interface AdvancedCache<K,​V>
        Parameters:
        key - the key that expired via max idle for the given entry
        Returns:
        if the entry was removed
      • withEncoding

        public AdvancedCache<?,​?> withEncoding​(Class<? extends org.infinispan.commons.dataconversion.Encoder> encoder)
        Description copied from interface: AdvancedCache
        Performs any cache operations using the specified Encoder.
        Specified by:
        withEncoding in interface AdvancedCache<K,​V>
        Parameters:
        encoder - Encoder used for both keys and values.
        Returns:
        an instance of AdvancedCache where all operations will use the supplied encoder.
      • withEncoding

        public AdvancedCache<?,​?> withEncoding​(Class<? extends org.infinispan.commons.dataconversion.Encoder> keyEncoder,
                                                     Class<? extends org.infinispan.commons.dataconversion.Encoder> valueEncoder)
        Description copied from interface: AdvancedCache
        Performs any cache operations using the specified pair of Encoder.
        Specified by:
        withEncoding in interface AdvancedCache<K,​V>
        Parameters:
        keyEncoder - Encoder for the keys.
        valueEncoder - Encoder for the values.
        Returns:
        an instance of AdvancedCache where all operations will use the supplied encoders.
      • withWrapping

        public AdvancedCache<K,​V> withWrapping​(Class<? extends org.infinispan.commons.dataconversion.Wrapper> wrapper)
        Description copied from interface: AdvancedCache
        Performs any cache operations using the specified Wrapper.
        Specified by:
        withWrapping in interface AdvancedCache<K,​V>
        Parameters:
        wrapper - Wrapper for the keys and values.
        Returns:
        an instance of AdvancedCache where all operations will use the supplied wrapper.
      • withMediaType

        public AdvancedCache<?,​?> withMediaType​(String keyMediaType,
                                                      String valueMediaType)
        Description copied from interface: AdvancedCache
        Perform any cache operations using an alternate MediaType.
        Specified by:
        withMediaType in interface AdvancedCache<K,​V>
        Parameters:
        keyMediaType - MediaType for the keys.
        valueMediaType - org.infinispan.commons.dataconversion for the values.
        Returns:
        an instance of AdvancedCache where all data will formatted according to the supplied MediaType.
      • withStorageMediaType

        public AdvancedCache<K,​V> withStorageMediaType()
        Description copied from interface: AdvancedCache
        Perform any cache operations using the same MediaType of the cache storage. This is equivalent to disabling transcoding on the cache.
        Specified by:
        withStorageMediaType in interface AdvancedCache<K,​V>
        Returns:
        an instance of AdvancedCache where no data conversion will take place.
      • withWrapping

        public AdvancedCache<K,​V> withWrapping​(Class<? extends org.infinispan.commons.dataconversion.Wrapper> keyWrapper,
                                                     Class<? extends org.infinispan.commons.dataconversion.Wrapper> valueWrapper)
        Description copied from interface: AdvancedCache
        Performs any cache operations using the specified pair of Wrapper.
        Specified by:
        withWrapping in interface AdvancedCache<K,​V>
        Parameters:
        keyWrapper - Wrapper for the keys.
        valueWrapper - Wrapper for the values.
        Returns:
        AdvancedCache where all operations will use the supplied wrappers.
      • clear

        @ManagedOperation(description="Clears the cache",
                          displayName="Clears the cache",
                          name="clear")
        public void clear()
        Description copied from interface: Cache
        Removes all mappings from the cache.

        Note: This should never be invoked in production unless you can guarantee no other invocations are ran concurrently.

        If the cache is transactional, it will not interact with the transaction.

        Specified by:
        clear in interface Cache<K,​V>
        Specified by:
        clear in interface Map<K,​V>
      • getName

        public String getName()
        Specified by:
        getName in interface org.infinispan.commons.api.BasicCache<K,​V>
      • getCacheName

        @ManagedAttribute(description="Returns the cache name",
                          displayName="Cache name",
                          dataType=TRAIT)
        public String getCacheName()
      • getVersion

        @ManagedAttribute(description="Returns the version of Infinispan",
                          displayName="Infinispan version",
                          dataType=TRAIT)
        public String getVersion()
        Specified by:
        getVersion in interface org.infinispan.commons.api.BasicCache<K,​V>
      • getConfigurationAsProperties

        @ManagedAttribute(description="Returns the cache configuration in form of properties",
                          displayName="Cache configuration properties",
                          dataType=TRAIT)
        public Properties getConfigurationAsProperties()
      • put

        public V put​(K key,
                     V value)
        Specified by:
        put in interface org.infinispan.commons.api.BasicCache<K,​V>
        Specified by:
        put in interface Map<K,​V>
      • put

        public V put​(K key,
                     V value,
                     long lifespan,
                     TimeUnit unit)
        Specified by:
        put in interface org.infinispan.commons.api.BasicCache<K,​V>
      • getAndPutInternal

        protected V getAndPutInternal​(K key,
                                      V value,
                                      Metadata metadata)
      • putIfAbsent

        public V putIfAbsent​(K key,
                             V value,
                             long lifespan,
                             TimeUnit unit)
        Specified by:
        putIfAbsent in interface org.infinispan.commons.api.BasicCache<K,​V>
      • putIfAbsent

        public V putIfAbsent​(K key,
                             V value,
                             Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of #putIfAbsent(K, V), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        putIfAbsent in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is to be associated
        value - value to be associated with the specified key
        metadata - information to store alongside the new value
        Returns:
        the previous value associated with the specified key, or null if there was no mapping for the key.
      • putIfAbsentInternal

        protected V putIfAbsentInternal​(K key,
                                        V value,
                                        Metadata metadata)
      • putAll

        public void putAll​(Map<? extends K,​? extends V> map,
                           long lifespan,
                           TimeUnit unit)
        Specified by:
        putAll in interface org.infinispan.commons.api.BasicCache<K,​V>
      • replace

        public V replace​(K key,
                         V value,
                         long lifespan,
                         TimeUnit unit)
        Specified by:
        replace in interface org.infinispan.commons.api.BasicCache<K,​V>
      • replace

        public boolean replace​(K key,
                               V oldValue,
                               V value,
                               long lifespan,
                               TimeUnit unit)
        Specified by:
        replace in interface org.infinispan.commons.api.BasicCache<K,​V>
      • getAndReplaceInternal

        protected V getAndReplaceInternal​(K key,
                                          V value,
                                          Metadata metadata)
      • put

        public V put​(K key,
                     V value,
                     long lifespan,
                     TimeUnit lifespanUnit,
                     long maxIdleTime,
                     TimeUnit maxIdleTimeUnit)
        Specified by:
        put in interface org.infinispan.commons.api.BasicCache<K,​V>
      • putIfAbsent

        public V putIfAbsent​(K key,
                             V value,
                             long lifespan,
                             TimeUnit lifespanUnit,
                             long maxIdleTime,
                             TimeUnit maxIdleTimeUnit)
        Specified by:
        putIfAbsent in interface org.infinispan.commons.api.BasicCache<K,​V>
      • putAll

        public void putAll​(Map<? extends K,​? extends V> map,
                           long lifespan,
                           TimeUnit lifespanUnit,
                           long maxIdleTime,
                           TimeUnit maxIdleTimeUnit)
        Specified by:
        putAll in interface org.infinispan.commons.api.BasicCache<K,​V>
      • replace

        public V replace​(K key,
                         V value,
                         long lifespan,
                         TimeUnit lifespanUnit,
                         long maxIdleTime,
                         TimeUnit maxIdleTimeUnit)
        Specified by:
        replace in interface org.infinispan.commons.api.BasicCache<K,​V>
      • replace

        public boolean replace​(K key,
                               V oldValue,
                               V value,
                               long lifespan,
                               TimeUnit lifespanUnit,
                               long maxIdleTime,
                               TimeUnit maxIdleTimeUnit)
        Specified by:
        replace in interface org.infinispan.commons.api.BasicCache<K,​V>
      • replace

        public boolean replace​(K key,
                               V oldValue,
                               V value,
                               Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of #replace(K, V, V), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        replace in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is associated
        oldValue - value expected to be associated with the specified key
        value - value to be associated with the specified key
        metadata - information to store alongside the new value
        Returns:
        true if the value was replaced
      • replaceInternal

        protected boolean replaceInternal​(K key,
                                          V oldValue,
                                          V value,
                                          Metadata metadata)
      • remove

        public V remove​(Object key)
        Specified by:
        remove in interface org.infinispan.commons.api.BasicCache<K,​V>
        Specified by:
        remove in interface Map<K,​V>
      • putAll

        public void putAll​(Map<? extends K,​? extends V> map)
        Specified by:
        putAll in interface Map<K,​V>
      • putAsync

        public CompletableFuture<V> putAsync​(K key,
                                             V value)
        Specified by:
        putAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • putAsync

        public CompletableFuture<V> putAsync​(K key,
                                             V value,
                                             long lifespan,
                                             TimeUnit unit)
        Specified by:
        putAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • putAsync

        public CompletableFuture<V> putAsync​(K key,
                                             V value,
                                             long lifespan,
                                             TimeUnit lifespanUnit,
                                             long maxIdle,
                                             TimeUnit maxIdleUnit)
        Specified by:
        putAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • putAllAsync

        public CompletableFuture<Void> putAllAsync​(Map<? extends K,​? extends V> data)
        Specified by:
        putAllAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • putAllAsync

        public CompletableFuture<Void> putAllAsync​(Map<? extends K,​? extends V> data,
                                                   long lifespan,
                                                   TimeUnit unit)
        Specified by:
        putAllAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • putAllAsync

        public CompletableFuture<Void> putAllAsync​(Map<? extends K,​? extends V> data,
                                                   long lifespan,
                                                   TimeUnit lifespanUnit,
                                                   long maxIdle,
                                                   TimeUnit maxIdleUnit)
        Specified by:
        putAllAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • clearAsync

        public CompletableFuture<Void> clearAsync()
        Specified by:
        clearAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • putIfAbsentAsync

        public CompletableFuture<V> putIfAbsentAsync​(K key,
                                                     V value)
        Specified by:
        putIfAbsentAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • putIfAbsentAsync

        public CompletableFuture<V> putIfAbsentAsync​(K key,
                                                     V value,
                                                     long lifespan,
                                                     TimeUnit unit)
        Specified by:
        putIfAbsentAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • putIfAbsentAsync

        public CompletableFuture<V> putIfAbsentAsync​(K key,
                                                     V value,
                                                     long lifespan,
                                                     TimeUnit lifespanUnit,
                                                     long maxIdle,
                                                     TimeUnit maxIdleUnit)
        Specified by:
        putIfAbsentAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • putIfAbsentAsync

        public CompletableFuture<V> putIfAbsentAsync​(K key,
                                                     V value,
                                                     Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of #putIfAbsentAsync(K, V), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        putIfAbsentAsync in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is to be associated
        value - value to be associated with the specified key
        metadata - information to store alongside the new value
        Returns:
        A future containing the previous value associated with the specified key, or null if there was no mapping for the key.
      • removeAsync

        public CompletableFuture<V> removeAsync​(Object key)
        Specified by:
        removeAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • replaceAsync

        public CompletableFuture<V> replaceAsync​(K key,
                                                 V value)
        Specified by:
        replaceAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • replaceAsync

        public CompletableFuture<V> replaceAsync​(K key,
                                                 V value,
                                                 long lifespan,
                                                 TimeUnit unit)
        Specified by:
        replaceAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • replaceAsync

        public CompletableFuture<V> replaceAsync​(K key,
                                                 V value,
                                                 long lifespan,
                                                 TimeUnit lifespanUnit,
                                                 long maxIdle,
                                                 TimeUnit maxIdleUnit)
        Specified by:
        replaceAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • replaceAsync

        public CompletableFuture<Boolean> replaceAsync​(K key,
                                                       V oldValue,
                                                       V newValue)
        Specified by:
        replaceAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • replaceAsync

        public CompletableFuture<Boolean> replaceAsync​(K key,
                                                       V oldValue,
                                                       V newValue,
                                                       long lifespan,
                                                       TimeUnit unit)
        Specified by:
        replaceAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • replaceAsync

        public CompletableFuture<Boolean> replaceAsync​(K key,
                                                       V oldValue,
                                                       V newValue,
                                                       long lifespan,
                                                       TimeUnit lifespanUnit,
                                                       long maxIdle,
                                                       TimeUnit maxIdleUnit)
        Specified by:
        replaceAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • replaceAsync

        public CompletableFuture<V> replaceAsync​(K key,
                                                 V value,
                                                 Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of #replaceAsync(K, V), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        replaceAsync in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is associated
        value - value to be associated with the specified key
        metadata - information to store alongside the new value
        Returns:
        the future that contains previous value associated with the specified key, or null if there was no mapping for the key.
      • getAsync

        public CompletableFuture<V> getAsync​(K key)
        Specified by:
        getAsync in interface org.infinispan.commons.api.AsyncCache<K,​V>
      • startBatch

        public boolean startBatch()
        Specified by:
        startBatch in interface org.infinispan.commons.api.BatchingCache
      • endBatch

        public void endBatch​(boolean successful)
        Specified by:
        endBatch in interface org.infinispan.commons.api.BatchingCache
      • withFlags

        public AdvancedCache<K,​V> withFlags​(Flag... flags)
        Description copied from interface: AdvancedCache
        A method that adds flags to any API call. For example, consider the following code snippet:
           cache.withFlags(Flag.FORCE_WRITE_LOCK).get(key);
         
        will invoke a cache.get() with a write lock forced.

        Note that for the flag to take effect, the cache operation must be invoked on the instance returned by this method.

        As an alternative to setting this on every invocation, users should also consider saving the decorated cache, as this allows for more readable code. E.g.:

            AdvancedCache<?, ?> forceWriteLockCache = cache.withFlags(Flag.FORCE_WRITE_LOCK);
            forceWriteLockCache.get(key1);
            forceWriteLockCache.get(key2);
            forceWriteLockCache.get(key3);
         
        Specified by:
        withFlags in interface AdvancedCache<K,​V>
        Parameters:
        flags - a set of flags to apply. See the Flag documentation.
        Returns:
        an AdvancedCache instance on which a real operation is to be invoked, if the flags are to be applied.
      • lockAs

        public AdvancedCache<K,​V> lockAs​(Object lockOwner)
        Description copied from interface: AdvancedCache
        Whenever this cache acquires a lock it will do so using the given Object as the owner of said lock.

        This can be useful when a lock may have been manually acquired and you wish to reuse that lock across invocations.

        Great care should be taken with this command as misuse can very easily lead to deadlocks.

        Specified by:
        lockAs in interface AdvancedCache<K,​V>
        Parameters:
        lockOwner - the lock owner to lock any keys as
        Returns:
        an AdvancedCache instance on which when an operation is invoked it will use lock owner object to acquire any locks
      • lock

        public boolean lock​(K... keys)
        Description copied from interface: AdvancedCache
        Locks a given key or keys eagerly across cache nodes in a cluster.

        Keys can be locked eagerly in the context of a transaction only.

        Specified by:
        lock in interface AdvancedCache<K,​V>
        Parameters:
        keys - the keys to lock
        Returns:
        true if the lock acquisition attempt was successful for all keys; false will only be returned if the lock acquisition timed out and the operation has been called with Flag.FAIL_SILENTLY.
      • lock

        public boolean lock​(Collection<? extends K> keys)
        Description copied from interface: AdvancedCache
        Locks collections of keys eagerly across cache nodes in a cluster.

        Collections of keys can be locked eagerly in the context of a transaction only.

        Specified by:
        lock in interface AdvancedCache<K,​V>
        Parameters:
        keys - collection of keys to lock
        Returns:
        true if the lock acquisition attempt was successful for all keys; false will only be returned if the lock acquisition timed out and the operation has been called with Flag.FAIL_SILENTLY.
      • getBatchContainer

        public BatchContainer getBatchContainer()
        Description copied from interface: AdvancedCache
        Returns the component in charge of batching cache operations.
        Specified by:
        getBatchContainer in interface AdvancedCache<K,​V>
        Returns:
        the batching component associated with this cache instance
      • getDataContainer

        public DataContainer<K,​V> getDataContainer()
        Description copied from interface: AdvancedCache
        Returns the container where data is stored in the cache. Users should interact with this component with care because direct calls on it bypass the internal interceptors and other infrastructure in place to guarantee the consistency of data.
        Specified by:
        getDataContainer in interface AdvancedCache<K,​V>
        Returns:
        the data container associated with this cache instance
      • getTransactionManager

        public TransactionManager getTransactionManager()
        Specified by:
        getTransactionManager in interface org.infinispan.commons.api.TransactionalCache
      • getLockManager

        public LockManager getLockManager()
        Description copied from interface: AdvancedCache
        Returns the component that deals with all aspects of acquiring and releasing locks for cache entries.
        Specified by:
        getLockManager in interface AdvancedCache<K,​V>
        Returns:
        retrieves the lock manager associated with this cache instance
      • getStats

        public Stats getStats()
        Description copied from interface: AdvancedCache
        Returns a Stats object that allows several statistics associated with this cache at runtime.
        Specified by:
        getStats in interface AdvancedCache<K,​V>
        Returns:
        this cache's Stats object
      • getClassLoader

        public ClassLoader getClassLoader()
        Description copied from interface: AdvancedCache
        Returns the cache loader associated associated with this cache. As an alternative to setting this on every invocation, users could also consider using the DecoratedCache wrapper.
        Specified by:
        getClassLoader in interface AdvancedCache<K,​V>
        Returns:
        this cache's cache loader
      • put

        public V put​(K key,
                     V value,
                     Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of #put(K, V), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc.
        Specified by:
        put in interface AdvancedCache<K,​V>
        Parameters:
        key - key to use
        value - value to store
        metadata - information to store alongside the value
        Returns:
        the previous value associated with key, or null if there was no mapping for key.
      • putAll

        public void putAll​(Map<? extends K,​? extends V> map,
                           Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of Map.putAll(Map), which takes in an instance of Metadata which can be used to provide metadata information for the entries being stored, such as lifespan, version of value...etc.
        Specified by:
        putAll in interface AdvancedCache<K,​V>
        Parameters:
        map - the values to store
        metadata - information to store alongside the value(s)
      • putAllInternal

        protected void putAllInternal​(Map<? extends K,​? extends V> map,
                                      Metadata metadata)
      • replace

        public V replace​(K key,
                         V value,
                         Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of #replace(K, V), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        replace in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is associated
        value - value to be associated with the specified key
        metadata - information to store alongside the new value
        Returns:
        the previous value associated with the specified key, or null if there was no mapping for the key.
      • computeIfAbsent

        public V computeIfAbsent​(K key,
                                 Function<? super K,​? extends V> mappingFunction)
        Description copied from interface: Cache

        When this method is used on a clustered cache, either replicated or distributed, the function will be serialized to owning nodes to perform the operation in the most performant way. However this means the function must have an appropriate Externalizer or be Serializable itself.

        For transactional caches, whenever the values of the caches are collections, and the mapping function modifies the collection, the collection must be copied and not directly modified, otherwise whenever rollback is called it won't work. This limitation could disappear in following releases if technically possible.

        Specified by:
        computeIfAbsent in interface Cache<K,​V>
        Specified by:
        computeIfAbsent in interface ConcurrentMap<K,​V>
        Specified by:
        computeIfAbsent in interface Map<K,​V>
      • computeIfAbsent

        public V computeIfAbsent​(K key,
                                 Function<? super K,​? extends V> mappingFunction,
                                 Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of #computeIfAbsent(K, Function), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        computeIfAbsent in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is associated
        mappingFunction - function to be applied to the specified key
        metadata - information to store alongside the new value
        Returns:
        the value created with the mapping function associated with the specified key, or the previous value associated with the specified key if the key is not absent.
      • computeIfAbsent

        public V computeIfAbsent​(K key,
                                 Function<? super K,​? extends V> mappingFunction,
                                 long lifespan,
                                 TimeUnit lifespanUnit)
        Specified by:
        computeIfAbsent in interface org.infinispan.commons.api.BasicCache<K,​V>
      • computeIfAbsent

        public V computeIfAbsent​(K key,
                                 Function<? super K,​? extends V> mappingFunction,
                                 long lifespan,
                                 TimeUnit lifespanUnit,
                                 long maxIdleTime,
                                 TimeUnit maxIdleTimeUnit)
        Specified by:
        computeIfAbsent in interface org.infinispan.commons.api.BasicCache<K,​V>
      • computeIfAbsentInternal

        protected V computeIfAbsentInternal​(K key,
                                            Function<? super K,​? extends V> mappingFunction,
                                            org.infinispan.commons.util.ByRef<V> newValueRef)
      • computeIfPresent

        public V computeIfPresent​(K key,
                                  BiFunction<? super K,​? super V,​? extends V> remappingFunction)
        Description copied from interface: Cache

        When this method is used on a clustered cache, either replicated or distributed, the bifunction will be serialized to owning nodes to perform the operation in the most performant way. However this means the bifunction must have an appropriate Externalizer or be Serializable itself.

        For transactional caches, whenever the values of the caches are collections, and the mapping function modifies the collection, the collection must be copied and not directly modified, otherwise whenever rollback is called it won't work. This limitation could disappear in following releases if technically possible.

        Specified by:
        computeIfPresent in interface Cache<K,​V>
        Specified by:
        computeIfPresent in interface ConcurrentMap<K,​V>
        Specified by:
        computeIfPresent in interface Map<K,​V>
      • computeIfPresent

        public V computeIfPresent​(K key,
                                  BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                                  long lifespan,
                                  TimeUnit lifespanUnit)
        Specified by:
        computeIfPresent in interface org.infinispan.commons.api.BasicCache<K,​V>
      • computeIfPresent

        public V computeIfPresent​(K key,
                                  BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                                  long lifespan,
                                  TimeUnit lifespanUnit,
                                  long maxIdleTime,
                                  TimeUnit maxIdleTimeUnit)
        Specified by:
        computeIfPresent in interface org.infinispan.commons.api.BasicCache<K,​V>
      • computeIfPresent

        public V computeIfPresent​(K key,
                                  BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                                  Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of #computeIfPresent(K, BiFunction), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        computeIfPresent in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is associated
        remappingFunction - function to be applied to the specified key/value
        metadata - information to store alongside the new value
        Returns:
        the previous value associated with the specified key, or null if there was no mapping for the key.
      • compute

        public V compute​(K key,
                         BiFunction<? super K,​? super V,​? extends V> remappingFunction)
        Description copied from interface: Cache

        When this method is used on a clustered cache, either replicated or distributed, the bifunction will be serialized to owning nodes to perform the operation in the most performant way. However this means the bifunction must have an appropriate Externalizer or be Serializable itself.

        For transactional caches, whenever the values of the caches are collections, and the mapping function modifies the collection, the collection must be copied and not directly modified, otherwise whenever rollback is called it won't work. This limitation could disappear in following releases if technically possible.

        Specified by:
        compute in interface Cache<K,​V>
        Specified by:
        compute in interface ConcurrentMap<K,​V>
        Specified by:
        compute in interface Map<K,​V>
      • compute

        public V compute​(K key,
                         BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                         long lifespan,
                         TimeUnit lifespanUnit)
        Specified by:
        compute in interface org.infinispan.commons.api.BasicCache<K,​V>
      • compute

        public V compute​(K key,
                         BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                         long lifespan,
                         TimeUnit lifespanUnit,
                         long maxIdleTime,
                         TimeUnit maxIdleTimeUnit)
        Specified by:
        compute in interface org.infinispan.commons.api.BasicCache<K,​V>
      • compute

        public V compute​(K key,
                         BiFunction<? super K,​? super V,​? extends V> remappingFunction,
                         Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of #compute(K, BiFunction), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc.
        Specified by:
        compute in interface AdvancedCache<K,​V>
        Parameters:
        key - key with which the specified value is associated
        remappingFunction - function to be applied to the specified key/value
        metadata - information to store alongside the new value
        Returns:
        the previous value associated with the specified key, or null if remapping function is gives null.
      • merge

        public V merge​(K key,
                       V value,
                       BiFunction<? super V,​? super V,​? extends V> remappingFunction)
        Description copied from interface: Cache

        When this method is used on a clustered cache, either replicated or distributed, the bifunction will be serialized to owning nodes to perform the operation in the most performant way. However this means the bifunction must have an appropriate Externalizer or be Serializable itself.

        For transactional caches, whenever the values of the caches are collections, and the mapping function modifies the collection, the collection must be copied and not directly modified, otherwise whenever rollback is called it won't work. This limitation could disappear in following releases if technically possible.

        Specified by:
        merge in interface Cache<K,​V>
        Specified by:
        merge in interface ConcurrentMap<K,​V>
        Specified by:
        merge in interface Map<K,​V>
      • merge

        public V merge​(K key,
                       V value,
                       BiFunction<? super V,​? super V,​? extends V> remappingFunction,
                       long lifespan,
                       TimeUnit lifespanUnit)
        Specified by:
        merge in interface org.infinispan.commons.api.BasicCache<K,​V>
      • merge

        public V merge​(K key,
                       V value,
                       BiFunction<? super V,​? super V,​? extends V> remappingFunction,
                       long lifespan,
                       TimeUnit lifespanUnit,
                       long maxIdleTime,
                       TimeUnit maxIdleTimeUnit)
        Specified by:
        merge in interface org.infinispan.commons.api.BasicCache<K,​V>
      • merge

        public V merge​(K key,
                       V value,
                       BiFunction<? super V,​? super V,​? extends V> remappingFunction,
                       Metadata metadata)
        Description copied from interface: AdvancedCache
        An overloaded form of Cache.merge(Object, Object, BiFunction), which takes in an instance of Metadata which can be used to provide metadata information for the entry being stored, such as lifespan, version of value...etc. The Metadata is only stored if the call is successful.
        Specified by:
        merge in interface AdvancedCache<K,​V>
        Parameters:
        key - , key with which the resulting value is to be associated
        value - , the non-null value to be merged with the existing value associated with the key or, if no existing value or a null value is associated with the key, to be associated with the key
        remappingFunction - , the function to recompute a value if present
        metadata - , information to store alongside the new value
        Returns:
        the new value associated with the specified key, or null if no value is associated with the key