Module javafx.graphics
Package javafx.scene

Class Node

java.lang.Object
javafx.scene.Node
All Implemented Interfaces:
Styleable, EventTarget
Direct Known Subclasses:
Camera, Canvas, ImageView, LightBase, MediaView, Parent, Shape, Shape3D, SubScene, SwingNode
@IDProperty("id") public abstract class Node extends Object implements EventTarget, Styleable
Base class for scene graph nodes. A scene graph is a set of tree data structures where every item has zero or one parent, and each item is either a "leaf" with zero sub-items or a "branch" with zero or more sub-items.

Each item in the scene graph is called a Node. Branch nodes are of type Parent, whose concrete subclasses are Group, Region, and Control, or subclasses thereof.

Leaf nodes are classes such as Rectangle, Text, ImageView, MediaView, or other such leaf classes which cannot have children. Only a single node within each scene graph tree will have no parent, which is referred to as the "root" node.

There may be several trees in the scene graph. Some trees may be part of a Scene, in which case they are eligible to be displayed. Other trees might not be part of any Scene.

A node may occur at most once anywhere in the scene graph. Specifically, a node must appear no more than once in all of the following: as the root node of a Scene, the children ObservableList of a Parent, or as the clip of a Node.

The scene graph must not have cycles. A cycle would exist if a node is an ancestor of itself in the tree, considering the Group content ObservableList, Parent children ObservableList, and Node clip relationships mentioned above.

If a program adds a child node to a Parent (including Group, Region, etc) and that node is already a child of a different Parent or the root of a Scene, the node is automatically (and silently) removed from its former parent. If a program attempts to modify the scene graph in any other way that violates the above rules, an exception is thrown, the modification attempt is ignored and the scene graph is restored to its previous state.

It is possible to rearrange the structure of the scene graph, for example, to move a subtree from one location in the scene graph to another. In order to do this, one would normally remove the subtree from its old location before inserting it at the new location. However, the subtree will be automatically removed as described above if the application doesn't explicitly remove it.

Node objects may be constructed and modified on any thread as long they are not yet attached to a Scene in a Window that is showing. An application must attach nodes to such a Scene or modify them on the JavaFX Application Thread.

The JavaFX Application Thread is created as part of the startup process for the JavaFX runtime. See the Application class and the Platform.startup(Runnable) method for more information.

An application should not extend the Node class directly. Doing so may lead to an UnsupportedOperationException being thrown.

String ID

Each node in the scene graph can be given a unique id. This id is much like the "id" attribute of an HTML tag in that it is up to the designer and developer to ensure that the id is unique within the scene graph. A convenience function called lookup(String) can be used to find a node with a unique id within the scene graph, or within a subtree of the scene graph. The id can also be used identify nodes for applying styles; see the CSS section below.

Coordinate System

The Node class defines a traditional computer graphics "local" coordinate system in which the x axis increases to the right and the y axis increases downwards. The concrete node classes for shapes provide variables for defining the geometry and location of the shape within this local coordinate space. For example, Rectangle provides x, y, width, height variables while Circle provides centerX, centerY, and radius.

At the device pixel level, integer coordinates map onto the corners and cracks between the pixels and the centers of the pixels appear at the midpoints between integer pixel locations. Because all coordinate values are specified with floating point numbers, coordinates can precisely point to these corners (when the floating point values have exact integer values) or to any location on the pixel. For example, a coordinate of (0.5, 0.5) would point to the center of the upper left pixel on the Stage. Similarly, a rectangle at (0, 0) with dimensions of 10 by 10 would span from the upper left corner of the upper left pixel on the Stage to the lower right corner of the 10th pixel on the 10th scanline. The pixel center of the last pixel inside that rectangle would be at the coordinates (9.5, 9.5).

In practice, most nodes have transformations applied to their coordinate system as mentioned below. As a result, the information above describing the alignment of device coordinates to the pixel grid is relative to the transformed coordinates, not the local coordinates of the nodes. The Shape class describes some additional important context-specific information about coordinate mapping and how it can affect rendering.

Transformations

Any Node can have transformations applied to it. These include translation, rotation, scaling, or shearing.

A translation transformation is one which shifts the origin of the node's coordinate space along either the x or y axis. For example, if you create a Rectangle which is drawn at the origin (x=0, y=0) and has a width of 100 and a height of 50, and then apply a Translate with a shift of 10 along the x axis (x=10), then the rectangle will appear drawn at (x=10, y=0) and remain 100 points wide and 50 tall. Note that the origin was shifted, not the x variable of the rectangle.

A common node transform is a translation by an integer distance, most often used to lay out nodes on the stage. Such integer translations maintain the device pixel mapping so that local coordinates that are integers still map to the cracks between pixels.

A rotation transformation is one which rotates the coordinate space of the node about a specified "pivot" point, causing the node to appear rotated. For example, if you create a Rectangle which is drawn at the origin (x=0, y=0) and has a width of 100 and height of 30 and you apply a Rotate with a 90 degree rotation (angle=90) and a pivot at the origin (pivotX=0, pivotY=0), then the rectangle will be drawn as if its x and y were zero but its height was 100 and its width -30. That is, it is as if a pin is being stuck at the top left corner and the rectangle is rotating 90 degrees clockwise around that pin. If the pivot point is instead placed in the center of the rectangle (at point x=50, y=15) then the rectangle will instead appear to rotate about its center.

Note that as with all transformations, the x, y, width, and height variables of the rectangle (which remain relative to the local coordinate space) have not changed, but rather the transformation alters the entire coordinate space of the rectangle.

A scaling transformation causes a node to either appear larger or smaller depending on the scaling factor. Scaling alters the coordinate space of the node such that each unit of distance along the axis in local coordinates is multiplied by the scale factor. As with rotation transformations, scaling transformations are applied about a "pivot" point. You can think of this as the point in the Node around which you "zoom". For example, if you create a Rectangle with a strokeWidth of 5, and a width and height of 50, and you apply a Scale with scale factors (x=2.0, y=2.0) and a pivot at the origin (pivotX=0, pivotY=0), the entire rectangle (including the stroke) will double in size, growing to the right and downwards from the origin.

A shearing transformation, sometimes called a skew, effectively rotates one axis so that the x and y axes are no longer perpendicular.

Multiple transformations may be applied to a node. Custom transforms are applied using the transforms list. Predefined transforms are applied using the properties specified below. The matrices that represent the transforms are multiplied in this order:

  1. Layout (layoutX, layoutY) and translate (translateX, translateY, translateZ)
  2. Rotate (rotate)
  3. Scale (scaleX, scaleY, scaleZ)
  4. Transforms list (transforms) starting from element 0
The transforms are applied in the reverse order of the matrix multiplication outlined above: last element of the transforms list to 0th element, scale, rotate, and layout and translate. By applying the transforms in this order, the bounds in the local coordinates of the node are transformed to the bounds in the parent coordinate of the node (see the Bounding Rectangles section).

Bounding Rectangles

Since every Node has transformations, every Node's geometric bounding rectangle can be described differently depending on whether transformations are accounted for or not.

Each Node has a read-only boundsInLocal variable which specifies the bounding rectangle of the Node in untransformed local coordinates. boundsInLocal includes the Node's shape geometry, including any space required for a non-zero stroke that may fall outside the local position/size variables, and its clip and effect variables.

Each Node also has a read-only boundsInParent variable which specifies the bounding rectangle of the Node after all transformations have been applied as specified in the Transformations section. It is called "boundsInParent" because the rectangle will be relative to the parent's coordinate system. This is the 'visual' bounds of the node.

Finally, the layoutBounds variable defines the rectangular bounds of the Node that should be used as the basis for layout calculations and may differ from the visual bounds of the node. For shapes, Text, and ImageView, layoutBounds by default includes only the shape geometry, including space required for a non-zero strokeWidth, but does not include the effect, clip, or any transforms. For resizable classes (Regions and Controls) layoutBounds will always map to 0,0 width x height.

The image shows a node without any transformation and its boundsInLocal:

A sine wave shape enclosed by an axis-aligned rectangular bounds

If we rotate the image by 20 degrees we get following result:

An axis-aligned rectangular bounds that encloses the shape rotated by 20 degrees

The red rectangle represents boundsInParent in the coordinate space of the Node's parent. The boundsInLocal stays the same as in the first image, the green rectangle in this image represents boundsInLocal in the coordinate space of the Node.

The images show a filled and stroked rectangle and their bounds. The first rectangle [x:10.0 y:10.0 width:100.0 height:100.0 strokeWidth:0] has the following bounds bounds: [x:10.0 y:10.0 width:100.0 height:100.0]. The second rectangle [x:10.0 y:10.0 width:100.0 height:100.0 strokeWidth:5] has the following bounds: [x:7.5 y:7.5 width:105 height:105] (the stroke is centered by default, so only half of it is outside of the original bounds; it is also possible to create inside or outside stroke). Since neither of the rectangles has any transformation applied, boundsInParent and boundsInLocal are the same.

The rectangles are enclosed by their respective bounds

CSS

The Node class contains id, styleClass, and style variables that are used in styling this node from CSS. The id and styleClass variables are used in CSS style sheets to identify nodes to which styles should be applied. The style variable contains style properties and values that are applied directly to this node.

For further information about CSS and how to apply CSS styles to nodes, see the CSS Reference Guide.

Since:
JavaFX 2.0

  • Property Details

    • parent

      public final ReadOnlyObjectProperty<Parent> parentProperty
      The parent of this Node. If this Node has not been added to a scene graph, then parent will be null.
      Default value:
      null
      See Also:

    • scene

      public final ReadOnlyObjectProperty<Scene> sceneProperty
      The Scene that this Node is part of. If the Node is not part of a scene, then this variable will be null.
      Default value:
      null
      See Also:

    • id

      public final StringProperty idProperty
      The id of this Node. This simple string identifier is useful for finding a specific Node within the scene graph. While the id of a Node should be unique within the scene graph, this uniqueness is not enforced. This is analogous to the "id" attribute on an HTML element (CSS ID Specification).

      For example, if a Node is given the id of "myId", then the lookup method can be used to find this node as follows: scene.lookup("#myId");.

      Default value:
      null
      See Also:

    • style

      public final StringProperty styleProperty
      A string representation of the CSS style associated with this specific Node. This is analogous to the "style" attribute of an HTML element. Note that, like the HTML style attribute, this variable contains style properties and values and not the selector portion of a style rule.
      Default value:
      empty string
      See Also:

    • visible

      public final BooleanProperty visibleProperty
      Specifies whether this Node and any subnodes should be rendered as part of the scene graph. A node may be visible and yet not be shown in the rendered scene if, for instance, it is off the screen or obscured by another Node. Invisible nodes never receive mouse events or keyboard focus and never maintain keyboard focus when they become invisible.
      Default value:
      true
      See Also:

    • cursor

      public final ObjectProperty<Cursor> cursorProperty
      Defines the mouse cursor for this Node and subnodes. If null, then the cursor of the first parent node with a non-null cursor will be used. If no Node in the scene graph defines a cursor, then the cursor of the Scene will be used.
      Default value:
      null
      See Also:

    • opacity

      public final DoubleProperty opacityProperty
      Specifies how opaque (that is, solid) the Node appears. A Node with 0% opacity is fully translucent. That is, while it is still visible and rendered, you generally won't be able to see it. The exception to this rule is when the Node is combined with a blending mode and blend effect in which case a translucent Node may still have an impact in rendering. An opacity of 50% will render the node as being 50% transparent.

      A visible node with any opacity setting still receives mouse events and can receive keyboard focus. For example, if you want to have a large invisible rectangle overlay all Nodes in the scene graph in order to intercept mouse events but not be visible to the user, you could create a large Rectangle that had an opacity of 0%.

      Opacity is specified as a value between 0 and 1. Values less than 0 are treated as 0, values greater than 1 are treated as 1.

      On some platforms ImageView might not support opacity variable.

      There is a known limitation of mixing opacity < 1.0 with a 3D Transform. Opacity/Blending is essentially a 2D image operation. The result of an opacity < 1.0 set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      1.0
      See Also:

    • blendMode

      public final ObjectProperty<BlendMode> blendModeProperty
      The BlendMode used to blend this individual node into the scene behind it. If this node is a Group, then all of the children will be composited individually into a temporary buffer using their own blend modes and then that temporary buffer will be composited into the scene using the specified blend mode. A value of null is treated as pass-through. This means no effect on a parent (such as a Group), and the equivalent of SRC_OVER for a single Node.
      Default value:
      null
      See Also:

    • clip

      public final ObjectProperty<Node> clipProperty
      Specifies a Node to use to define the clipping shape for this Node. This clipping Node is not a child of this Node in the scene graph sense. Rather, it is used to define the clip for this Node.

      For example, you can use an ImageView Node as a mask to represent the Clip. Or you could use one of the geometric shape Nodes such as Rectangle or Circle. Or you could use a Text node to represent the Clip.

      See the class documentation for Node for scene graph structure restrictions on setting the clip. If these restrictions are violated by a change to the clip variable, the change is ignored and the previous value of the clip variable is restored.

      Note that this is a conditional feature. See ConditionalFeature.SHAPE_CLIP for more information.

      There is a known limitation of mixing Clip with a 3D Transform. Clipping is essentially a 2D image operation. The result of a Clip set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      null
      See Also:

    • cache

      public final BooleanProperty cacheProperty
      A performance hint to the system to indicate that this Node should be cached as a bitmap. Rendering a bitmap representation of a node will be faster than rendering primitives in many cases, especially in the case of primitives with effects applied (such as a blur). However, it also increases memory usage. This hint indicates whether that trade-off (increased memory usage for increased performance) is worthwhile. Also note that on some platforms such as GPU accelerated platforms there is little benefit to caching Nodes as bitmaps when blurs and other effects are used since they are very fast to render on the GPU. The cacheHintProperty() variable provides additional options for enabling more aggressive bitmap caching.

      Caching may be disabled for any node that has a 3D transform on itself, any of its ancestors, or any of its descendants.

      Default value:
      false
      See Also:

    • cacheHint

      public final ObjectProperty<CacheHint> cacheHintProperty
      Additional hint for controlling bitmap caching.

      Under certain circumstances, such as animating nodes that are very expensive to render, it is desirable to be able to perform transformations on the node without having to regenerate the cached bitmap. An option in such cases is to perform the transforms on the cached bitmap itself.

      This technique can provide a dramatic improvement to animation performance, though may also result in a reduction in visual quality. The cacheHint variable provides a hint to the system about how and when that trade-off (visual quality for animation performance) is acceptable.

      It is possible to enable the cacheHint only at times when your node is animating. In this way, expensive nodes can appear on screen with full visual quality, yet still animate smoothly.

      Example: 

      
        expensiveNode.setCache(true);
        expensiveNode.setCacheHint(CacheHint.QUALITY);
        ...
        // Do an animation
        expensiveNode.setCacheHint(CacheHint.SPEED);
        new Timeline(
            new KeyFrame(Duration.seconds(2),
                new KeyValue(expensiveNode.scaleXProperty(), 2.0),
                new KeyValue(expensiveNode.scaleYProperty(), 2.0),
                new KeyValue(expensiveNode.rotateProperty(), 360),
                new KeyValue(expensiveNode.cacheHintProperty(), CacheHint.QUALITY)
            )
        ).play();
      Note that cacheHint is only a hint to the system. Depending on the details of the node or the transform, this hint may be ignored.

      If Node.cache is false, cacheHint is ignored. Caching may be disabled for any node that has a 3D transform on itself, any of its ancestors, or any of its descendants.

      Default value:
      CacheHint.DEFAULT
      See Also:

    • effect

      public final ObjectProperty<Effect> effectProperty
      Specifies an effect to apply to this Node.

      Note that this is a conditional feature. See ConditionalFeature.EFFECT for more information.

      There is a known limitation of mixing Effect with a 3D Transform. Effect is essentially a 2D image operation. The result of an Effect set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      null
      See Also:

    • depthTest

      public final ObjectProperty<DepthTest> depthTestProperty
      Indicates whether depth testing is used when rendering this node. If the depthTest flag is DepthTest.DISABLE, then depth testing is disabled for this node. If the depthTest flag is DepthTest.ENABLE, then depth testing is enabled for this node. If the depthTest flag is DepthTest.INHERIT, then depth testing is enabled for this node if it is enabled for the parent node or the parent node is null.

      The depthTest flag is only used when the depthBuffer flag for the Scene is true (meaning that the Scene has an associated depth buffer)

      Depth test comparison is only done among nodes with depthTest enabled. A node with depthTest disabled does not read, test, or write the depth buffer, that is to say its Z value will not be considered for depth testing with other nodes.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      See the constructor in Scene with depthBuffer as one of its input arguments.

      Default value:
      INHERIT
      See Also:

    • disable

      public final BooleanProperty disableProperty
      Defines the individual disabled state of this Node. Setting disable to true will cause this Node and any subnodes to become disabled. This property should be used only to set the disabled state of a Node. For querying the disabled state of a Node, the disabled property should instead be used, since it is possible that a Node was disabled as a result of an ancestor being disabled even if the individual disable state on this Node is false.
      Default value:
      false
      See Also:

    • pickOnBounds

      public final BooleanProperty pickOnBoundsProperty
      Defines how the picking computation is done for this node when triggered by a MouseEvent or a contains function call. If pickOnBounds is true, then picking is computed by intersecting with the bounds of this node, else picking is computed by intersecting with the geometric shape of this node. The default value of this property is false unless overridden by a subclass. The default value is true for Region.
      Default value:
      false; true for Region
      See Also:

    • disabled

      public final ReadOnlyBooleanProperty disabledProperty
      Indicates whether or not this Node is disabled. A Node will become disabled if disable is set to true on either itself or one of its ancestors in the scene graph.

      A disabled Node should render itself differently to indicate its disabled state to the user. Such disabled rendering is dependent on the implementation of the Node. The shape classes contained in javafx.scene.shape do not implement such rendering by default, therefore applications using shapes for handling input must implement appropriate disabled rendering themselves. The user-interface controls defined in javafx.scene.control will implement disabled-sensitive rendering, however.

      A disabled Node does not receive mouse or key events.

      Default value:
      false
      See Also:

    • onDragEntered

      public final ObjectProperty<EventHandler<? super DragEvent>> onDragEnteredProperty
      Defines a function to be called when drag gesture enters this Node.
      See Also:

    • onDragExited

      public final ObjectProperty<EventHandler<? super DragEvent>> onDragExitedProperty
      Defines a function to be called when drag gesture exits this Node.
      See Also:

    • onDragOver

      public final ObjectProperty<EventHandler<? super DragEvent>> onDragOverProperty
      Defines a function to be called when drag gesture progresses within this Node.
      See Also:

    • onDragDropped

      public final ObjectProperty<EventHandler<? super DragEvent>> onDragDroppedProperty
      Defines a function to be called when the mouse button is released on this Node during drag and drop gesture. Transfer of data from the DragEvent's dragboard should happen in this function.
      See Also:

    • onDragDone

      public final ObjectProperty<EventHandler<? super DragEvent>> onDragDoneProperty
      Defines a function to be called when this Node is a drag and drop gesture source after its data has been dropped on a drop target. The transferMode of the event shows what just happened at the drop target. If transferMode has the value MOVE, then the source can clear out its data. Clearing the source's data gives the appropriate appearance to a user that the data has been moved by the drag and drop gesture. A transferMode that has the value NONE indicates that no data was transferred during the drag and drop gesture.
      See Also:

    • managed

      public final BooleanProperty managedProperty
      Defines whether or not this node's layout will be managed by it's parent. If the node is managed, it's parent will factor the node's geometry into its own preferred size and layoutBounds calculations and will lay it out during the scene's layout pass. If a managed node's layoutBounds changes, it will automatically trigger relayout up the scene-graph to the nearest layout root (which is typically the scene's root node).

      If the node is unmanaged, its parent will ignore the child in both preferred size computations and layout. Changes in layoutBounds will not trigger relayout above it. If an unmanaged node is of type Parent, it will act as a "layout root", meaning that calls to Parent.requestLayout() beneath it will cause only the branch rooted by the node to be relayed out, thereby isolating layout changes to that root and below. It's the application's responsibility to set the size and position of an unmanaged node.

      By default all nodes are managed.

      See Also:

    • layoutX

      public final DoubleProperty layoutXProperty
      Defines the x coordinate of the translation that is added to this Node's transform for the purpose of layout. The value should be computed as the offset required to adjust the position of the node from its current layoutBounds minX position (which might not be 0) to the desired location.

      For example, if textnode should be positioned at finalX 

      
     textnode.setLayoutX(finalX - textnode.getLayoutBounds().getMinX());

      Failure to subtract layoutBounds minX may result in misplacement of the node. The relocate(x, y) method will automatically do the correct computation and should generally be used over setting layoutX directly.

      The node's final translation will be computed as layoutX + translateX, where layoutX establishes the node's stable position and translateX optionally makes dynamic adjustments to that position.

      If the node is managed and has a Region as its parent, then the layout region will set layoutX according to its own layout policy. If the node is unmanaged or parented by a Group, then the application may set layoutX directly to position it.

      See Also:

    • layoutY

      public final DoubleProperty layoutYProperty
      Defines the y coordinate of the translation that is added to this Node's transform for the purpose of layout. The value should be computed as the offset required to adjust the position of the node from its current layoutBounds minY position (which might not be 0) to the desired location.

      For example, if textnode should be positioned at finalY 

      
     textnode.setLayoutY(finalY - textnode.getLayoutBounds().getMinY());

      Failure to subtract layoutBounds minY may result in misplacement of the node. The relocate(x, y) method will automatically do the correct computation and should generally be used over setting layoutY directly.

      The node's final translation will be computed as layoutY + translateY, where layoutY establishes the node's stable position and translateY optionally makes dynamic adjustments to that position.

      If the node is managed and has a Region as its parent, then the region will set layoutY according to its own layout policy. If the node is unmanaged or parented by a Group, then the application may set layoutY directly to position it.

      See Also:

    • boundsInParent

      public final ReadOnlyObjectProperty<Bounds> boundsInParentProperty
      The rectangular bounds of this Node in the parent coordinate system. boundsInParent is calculated by taking the local bounds and applying the node transforms as specified in the Transformations section of the class doc.

      The resulting bounds will be conceptually in the coordinate space of the Node's parent, however, the node need not have a parent to calculate these bounds.

      Note that this method does not take the node's visibility into account; the computation is based on the geometry of this Node only.

      This property will always have a non-null value.

      Note that boundsInParent is automatically recomputed whenever the geometry of a node changes, or when any of the following the change: transforms ObservableList, any of the translate, layout or scale variables, or the rotate variable. For this reason, it is an error to bind any of these values in a node to an expression that depends upon this variable. For example, the x or y variables of a shape, or translateX, translateY should never be bound to boundsInParent for the purpose of positioning the node.

      See also the Bounding Rectangles section.

      See Also:

    • boundsInLocal

      public final ReadOnlyObjectProperty<Bounds> boundsInLocalProperty
      The rectangular bounds of this Node in the node's untransformed local coordinate space. For nodes that extend Shape, the local bounds will also include space required for a non-zero stroke that may fall outside the shape's geometry that is defined by position and size attributes. The local bounds will also include any clipping set with clip as well as effects set with effect.

      Note that this method does not take the node's visibility into account; the computation is based on the geometry of this Node only.

      This property will always have a non-null value.

      Note that boundsInLocal is automatically recomputed whenever the geometry of a node changes. For this reason, it is an error to bind any of these values in a node to an expression that depends upon this variable. For example, the x or y variables of a shape should never be bound to boundsInLocal for the purpose of positioning the node.

      See Also:

    • layoutBounds

      public final ReadOnlyObjectProperty<Bounds> layoutBoundsProperty
      The rectangular bounds that should be used for layout calculations for this node. layoutBounds may differ from the visual bounds of the node and is computed differently depending on the node type.

      If the node type is resizable (Region, Control, or WebView) then the layoutBounds will always be 0,0 width x height. If the node type is not resizable (Shape, Text, or Group), then the layoutBounds are computed based on the node's geometric properties and does not include the node's clip, effect, or transforms. See individual class documentation for details.

      Note that the layoutX, layoutY, translateX, and translateY variables are not included in the layoutBounds. This is important because layout code must first determine the current size and location of the node (using layoutBounds) and then set layoutX and layoutY to adjust the translation of the node so that it will have the desired layout position.

      Because the computation of layoutBounds is often tied to a node's geometric variables, it is an error to bind any such variables to an expression that depends upon layoutBounds. For example, the x or y variables of a shape should never be bound to layoutBounds for the purpose of positioning the node.

      Note that for 3D shapes, the layout bounds is actually a rectangular box with X, Y, and Z values, although only X and Y are used in layout calculations.

      The layoutBounds will never be null.

      See Also:

    • viewOrder

      public final DoubleProperty viewOrderProperty
      Defines the rendering and picking order of this Node within its parent.

      This property is used to alter the rendering and picking order of a node within its parent without reordering the parent's children list. For example, this can be used as a more efficient way to implement transparency sorting. To do this, an application can assign the viewOrder value of each node to the computed distance between that node and the viewer.

      The parent will traverse its children in decreasing viewOrder order. This means that a child with a lower viewOrder will be in front of a child with a higher viewOrder. If two children have the same viewOrder, the parent will traverse them in the order they appear in the parent's children list.

      However, viewOrder does not alter the layout and focus traversal order of this Node within its parent. A parent always traverses its children list in order when doing layout or focus traversal.

      Default value:
      0.0
      Since:
      9
      See Also:

    • translateX

      public final DoubleProperty translateXProperty
      Defines the x coordinate of the translation that is added to this Node's transform.

      The node's final translation will be computed as layoutX + translateX, where layoutX establishes the node's stable position and translateX optionally makes dynamic adjustments to that position.

      This variable can be used to alter the location of a node without disturbing its layoutBounds, which makes it useful for animating a node's location.

      Default value:
      0
      See Also:

    • translateY

      public final DoubleProperty translateYProperty
      Defines the y coordinate of the translation that is added to this Node's transform.

      The node's final translation will be computed as layoutY + translateY, where layoutY establishes the node's stable position and translateY optionally makes dynamic adjustments to that position.

      This variable can be used to alter the location of a node without disturbing its layoutBounds, which makes it useful for animating a node's location.

      Default value:
      0
      See Also:

    • translateZ

      public final DoubleProperty translateZProperty
      Defines the Z coordinate of the translation that is added to the transformed coordinates of this Node. This value will be added to any translation defined by the transforms ObservableList and layoutZ.

      This variable can be used to alter the location of a Node without disturbing its layout bounds, which makes it useful for animating a node's location.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      0
      See Also:

    • scaleX

      public final DoubleProperty scaleXProperty
      Defines the factor by which coordinates are scaled about the center of the object along the X axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the untransformed layoutBounds.

      Default value:
      1.0
      See Also:

    • scaleY

      public final DoubleProperty scaleYProperty
      Defines the factor by which coordinates are scaled about the center of the object along the Y axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the untransformed layoutBounds.

      Default value:
      1.0
      See Also:

    • scaleZ

      public final DoubleProperty scaleZProperty
      Defines the factor by which coordinates are scaled about the center of the object along the Z axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the rectangular bounds formed by taking boundsInLocal and applying all the transforms in the transforms ObservableList.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      1.0
      See Also:

    • rotate

      public final DoubleProperty rotateProperty
      Defines the angle of rotation about the Node's center, measured in degrees. This is used to rotate the Node.

      This rotation factor is not included in layoutBounds by default, which makes it ideal for rotating the entire node after all effects and transforms have been taken into account.

      The pivot point about which the rotation occurs is the center of the untransformed layoutBounds.

      Note that because the pivot point is computed as the center of this Node's layout bounds, any change to the layout bounds will cause the pivot point to change, which can move the object. For a leaf node, any change to the geometry will cause the layout bounds to change. For a group node, any change to any of its children, including a change in a child's geometry, clip, effect, position, orientation, or scale, will cause the group's layout bounds to change. If this movement of the pivot point is not desired, applications should instead use the Node's transforms ObservableList, and add a Rotate transform, which has a user-specifiable pivot point.

      Default value:
      0.0
      See Also:

    • rotationAxis

      public final ObjectProperty<Point3D> rotationAxisProperty
      Defines the axis of rotation of this Node.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      Rotate.Z_AXIS
      See Also:

    • localToParentTransform

      public final ReadOnlyObjectProperty<Transform> localToParentTransformProperty
      An affine transform that holds the computed local-to-parent transform. This is the concatenation of all transforms in this node, including all of the convenience transforms.
      Since:
      JavaFX 2.2
      See Also:

    • localToSceneTransform

      public final ReadOnlyObjectProperty<Transform> localToSceneTransformProperty
      An affine transform that holds the computed local-to-scene transform. This is the concatenation of all transforms in this node's parents and in this node, including all of the convenience transforms up to the root. If this node is in a SubScene, this property represents transforms up to the subscene, not the root scene.

      Note that when you register a listener or a binding to this property, it needs to listen for invalidation on all its parents to the root node. This means that registering a listener on this property on many nodes may negatively affect performance of transformation changes in their common parents.

      Since:
      JavaFX 2.2
      See Also:

    • nodeOrientation

      public final ObjectProperty<NodeOrientation> nodeOrientationProperty
      Node orientation describes the flow of visual data within a node. In the English speaking world, visual data normally flows from left-to-right. In an Arabic or Hebrew world, visual data flows from right-to-left. This is consistent with the reading order of text in both worlds.
      Default value:
      NodeOrientation.INHERIT
      Since:
      JavaFX 8.0
      See Also:

    • effectiveNodeOrientation

      public final ReadOnlyObjectProperty<NodeOrientation> effectiveNodeOrientationProperty
      The effective orientation of a node resolves the inheritance of node orientation, returning either left-to-right or right-to-left.
      Since:
      JavaFX 8.0
      See Also:

    • mouseTransparent

      public final BooleanProperty mouseTransparentProperty
      If true, this node (together with all its children) is completely transparent to mouse events. When choosing target for mouse event, nodes with mouseTransparent set to true and their subtrees won't be taken into account.
      See Also:

    • hover

      public final ReadOnlyBooleanProperty hoverProperty
      Whether or not this Node is being hovered over. Typically this is due to the mouse being over the node, though it could be due to a pen hovering on a graphics tablet or other form of input.

      Note that current implementation of hover relies on mouse enter and exit events to determine whether this Node is in the hover state; this means that this feature is currently supported only on systems that have a mouse. Future implementations may provide alternative means of supporting hover.

      Default value:
      false
      See Also:

    • pressed

      public final ReadOnlyBooleanProperty pressedProperty
      Whether or not the Node is pressed. Typically this is true when the primary mouse button is down, though subclasses may define other mouse button state or key state to cause the node to be "pressed".
      Default value:
      false
      See Also:

    • onContextMenuRequested

      public final ObjectProperty<EventHandler<? super ContextMenuEvent>> onContextMenuRequestedProperty
      Defines a function to be called when a context menu has been requested on this Node.
      Since:
      JavaFX 2.1
      See Also:

    • onMouseClicked

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseClickedProperty
      Defines a function to be called when a mouse button has been clicked (pressed and released) on this Node.
      See Also:

    • onMouseDragged

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseDraggedProperty
      Defines a function to be called when a mouse button is pressed on this Node and then dragged.
      See Also:

    • onMouseEntered

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseEnteredProperty
      Defines a function to be called when the mouse enters this Node.
      See Also:

    • onMouseExited

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseExitedProperty
      Defines a function to be called when the mouse exits this Node.
      See Also:

    • onMouseMoved

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseMovedProperty
      Defines a function to be called when mouse cursor moves within this Node but no buttons have been pushed.
      See Also:

    • onMousePressed

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMousePressedProperty
      Defines a function to be called when a mouse button has been pressed on this Node.
      See Also:

    • onMouseReleased

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseReleasedProperty
      Defines a function to be called when a mouse button has been released on this Node.
      See Also:

    • onDragDetected

      public final ObjectProperty<EventHandler<? super MouseEvent>> onDragDetectedProperty
      Defines a function to be called when drag gesture has been detected. This is the right place to start drag and drop operation.
      See Also:

    • onMouseDragOver

      public final ObjectProperty<EventHandler<? super MouseDragEvent>> onMouseDragOverProperty
      Defines a function to be called when a full press-drag-release gesture progresses within this Node.
      Since:
      JavaFX 2.1
      See Also:

    • onMouseDragReleased

      public final ObjectProperty<EventHandler<? super MouseDragEvent>> onMouseDragReleasedProperty
      Defines a function to be called when a full press-drag-release gesture ends (by releasing mouse button) within this Node.
      Since:
      JavaFX 2.1
      See Also:

    • onMouseDragEntered

      public final ObjectProperty<EventHandler<? super MouseDragEvent>> onMouseDragEnteredProperty
      Defines a function to be called when a full press-drag-release gesture enters this Node.
      Since:
      JavaFX 2.1
      See Also:

    • onMouseDragExited

      public final ObjectProperty<EventHandler<? super MouseDragEvent>> onMouseDragExitedProperty
      Defines a function to be called when a full press-drag-release gesture leaves this Node.
      Since:
      JavaFX 2.1
      See Also:

    • onScrollStarted

      public final ObjectProperty<EventHandler<? super ScrollEvent>> onScrollStartedProperty
      Defines a function to be called when a scrolling gesture is detected.
      Since:
      JavaFX 2.2
      See Also:

    • onScroll

      public final ObjectProperty<EventHandler<? super ScrollEvent>> onScrollProperty
      Defines a function to be called when user performs a scrolling action.
      See Also:

    • onScrollFinished

      public final ObjectProperty<EventHandler<? super ScrollEvent>> onScrollFinishedProperty
      Defines a function to be called when a scrolling gesture ends.
      Since:
      JavaFX 2.2
      See Also:

    • onRotationStarted

      public final ObjectProperty<EventHandler<? super RotateEvent>> onRotationStartedProperty
      Defines a function to be called when a rotation gesture is detected.
      Since:
      JavaFX 2.2
      See Also:

    • onRotate

      public final ObjectProperty<EventHandler<? super RotateEvent>> onRotateProperty
      Defines a function to be called when user performs a rotation action.
      Since:
      JavaFX 2.2
      See Also:

    • onRotationFinished

      public final ObjectProperty<EventHandler<? super RotateEvent>> onRotationFinishedProperty
      Defines a function to be called when a rotation gesture ends.
      Since:
      JavaFX 2.2
      See Also:

    • onZoomStarted

      public final ObjectProperty<EventHandler<? super ZoomEvent>> onZoomStartedProperty
      Defines a function to be called when a zooming gesture is detected.
      Since:
      JavaFX 2.2
      See Also:

    • onZoom

      public final ObjectProperty<EventHandler<? super ZoomEvent>> onZoomProperty
      Defines a function to be called when user performs a zooming action.
      Since:
      JavaFX 2.2
      See Also:

    • onZoomFinished

      public final ObjectProperty<EventHandler<? super ZoomEvent>> onZoomFinishedProperty
      Defines a function to be called when a zooming gesture ends.
      Since:
      JavaFX 2.2
      See Also:

    • onSwipeUp

      public final ObjectProperty<EventHandler<? super SwipeEvent>> onSwipeUpProperty
      Defines a function to be called when an upward swipe gesture centered over this node happens.
      Since:
      JavaFX 2.2
      See Also:

    • onSwipeDown

      public final ObjectProperty<EventHandler<? super SwipeEvent>> onSwipeDownProperty
      Defines a function to be called when a downward swipe gesture centered over this node happens.
      Since:
      JavaFX 2.2
      See Also:

    • onSwipeLeft

      public final ObjectProperty<EventHandler<? super SwipeEvent>> onSwipeLeftProperty
      Defines a function to be called when a leftward swipe gesture centered over this node happens.
      Since:
      JavaFX 2.2
      See Also:

    • onSwipeRight

      public final ObjectProperty<EventHandler<? super SwipeEvent>> onSwipeRightProperty
      Defines a function to be called when an rightward swipe gesture centered over this node happens.
      Since:
      JavaFX 2.2
      See Also:

    • onTouchPressed

      public final ObjectProperty<EventHandler<? super TouchEvent>> onTouchPressedProperty
      Defines a function to be called when a new touch point is pressed.
      Since:
      JavaFX 2.2
      See Also:

    • onTouchMoved

      public final ObjectProperty<EventHandler<? super TouchEvent>> onTouchMovedProperty
      Defines a function to be called when a touch point is moved.
      Since:
      JavaFX 2.2
      See Also:

    • onTouchReleased

      public final ObjectProperty<EventHandler<? super TouchEvent>> onTouchReleasedProperty
      Defines a function to be called when a touch point is released.
      Since:
      JavaFX 2.2
      See Also:

    • onTouchStationary

      public final ObjectProperty<EventHandler<? super TouchEvent>> onTouchStationaryProperty
      Defines a function to be called when a touch point stays pressed and still.
      Since:
      JavaFX 2.2
      See Also:

    • onKeyPressed

      public final ObjectProperty<EventHandler<? super KeyEvent>> onKeyPressedProperty
      Defines a function to be called when this Node or its child Node has input focus and a key has been pressed. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      See Also:

    • onKeyReleased

      public final ObjectProperty<EventHandler<? super KeyEvent>> onKeyReleasedProperty
      Defines a function to be called when this Node or its child Node has input focus and a key has been released. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      See Also:

    • onKeyTyped

      public final ObjectProperty<EventHandler<? super KeyEvent>> onKeyTypedProperty
      Defines a function to be called when this Node or its child Node has input focus and a key has been typed. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      See Also:

    • onInputMethodTextChanged

      public final ObjectProperty<EventHandler<? super InputMethodEvent>> onInputMethodTextChangedProperty
      Defines a function to be called when this Node has input focus and the input method text has changed. If this function is not defined in this Node, then it receives the result string of the input method composition as a series of onKeyTyped function calls.

      When the Node loses the input focus, the JavaFX runtime automatically commits the existing composed text if any.

      See Also:

    • inputMethodRequests

      public final ObjectProperty<InputMethodRequests> inputMethodRequestsProperty
      Property holding InputMethodRequests.
      See Also:

    • focused

      public final ReadOnlyBooleanProperty focusedProperty
      Indicates whether this Node currently has the input focus. To have the input focus, a node must be the Scene's focus owner, and the scene must be in a Stage that is visible and active. See requestFocus() for more information.
      Default value:
      false
      See Also:

    • focusVisible

      public final ReadOnlyBooleanProperty focusVisibleProperty
      Indicates whether this Node should visibly indicate focus. This flag is set when the node acquires input focus via keyboard navigation, and it is cleared when the node loses focus or when requestFocus() is called.
      Default value:
      false
      Since:
      19
      See Also:

    • focusWithin

      public final ReadOnlyBooleanProperty focusWithinProperty
      Indicates whether this Node or any of its descendants currently has the input focus.
      Default value:
      false
      Since:
      19
      See Also:

    • focusTraversable

      public final BooleanProperty focusTraversableProperty
      Specifies whether this Node should be a part of focus traversal cycle. When this property is true focus can be moved to this Node and from this Node using regular focus traversal keys. On a desktop such keys are usually TAB for moving focus forward and SHIFT+TAB for moving focus backward. When a Scene is created, the system gives focus to a Node whose focusTraversable variable is true and that is eligible to receive the focus, unless the focus had been set explicitly via a call to requestFocus().
      Default value:
      false
      See Also:

    • eventDispatcher

      public final ObjectProperty<EventDispatcher> eventDispatcherProperty
      Specifies the event dispatcher for this node. The default event dispatcher sends the received events to the registered event handlers and filters. When replacing the value with a new EventDispatcher, the new dispatcher should forward events to the replaced dispatcher to maintain the node's default event handling behavior.
      See Also:

    • accessibleRole

      public final ObjectProperty<AccessibleRole> accessibleRoleProperty
      The accessible role for this Node.

      The screen reader uses the role of a node to determine the attributes and actions that are supported.

      Default value:
      AccessibleRole.NODE
      Since:
      JavaFX 8u40
      See Also:

    • accessibleRoleDescription

      public final ObjectProperty<String> accessibleRoleDescriptionProperty
      The role description of this Node.

      Normally, when a role is provided for a node, the screen reader speaks the role as well as the contents of the node. When this value is set, it is possible to override the default. This is useful because the set of roles is predefined. For example, it is possible to set the role of a node to be a button, but have the role description be arbitrary text.

      Default value:
      null
      Since:
      JavaFX 8u40
      See Also:

    • accessibleText

      public final ObjectProperty<String> accessibleTextProperty
      The accessible text for this Node.

      This property is used to set the text that the screen reader will speak. If a node normally speaks text, that text is overriden. For example, a button usually speaks using the text in the control but will no longer do this when this value is set.

      Default value:
      null
      Since:
      JavaFX 8u40
      See Also:

    • accessibleHelp

      public final ObjectProperty<String> accessibleHelpProperty
      The accessible help text for this Node.

      The help text provides a more detailed description of the accessible text for a node. By default, if the node has a tool tip, this text is used.

      Default value:
      null
      Since:
      JavaFX 8u40
      See Also:

  • Field Details

    • BASELINE_OFFSET_SAME_AS_HEIGHT

      public static final double BASELINE_OFFSET_SAME_AS_HEIGHT
      This is a special value that might be returned by getBaselineOffset(). This means that the Parent (layout Pane) of this Node should use the height of this Node as a baseline.
      See Also:

  • Constructor Details

    • Node

      protected Node()
      Creates a new instance of Node.

  • Method Details

    • getProperties

      public final ObservableMap<Object,Object> getProperties()
      Returns an observable map of properties on this node for use primarily by application developers.
      API Note:
      Layout managers use this map as well to specify layout constraints on the node, such as HBox#setHgrow, so the developer should be mindful of clearing the map or overriding its values. These entries are not removed automatically if the node is removed from the layout manager, so unused entries can exist throughout the life of the node.
      Returns:
      an observable map of properties on this node for use primarily by application developers

    • hasProperties

      public boolean hasProperties()
      Tests if Node has properties.
      Returns:
      true if node has properties.

    • setUserData

      public void setUserData(Object value)
      Convenience method for setting a single Object property that can be retrieved at a later date. This is functionally equivalent to calling the getProperties().put(Object key, Object value) method. This can later be retrieved by calling getUserData().
      Parameters:
      value - The value to be stored - this can later be retrieved by calling getUserData().

    • getUserData

      public Object getUserData()
      Returns a previously set Object property, or null if no such property has been set using the setUserData(java.lang.Object) method.
      Returns:
      The Object that was previously set, or null if no property has been set or if null was set.

    • getParent

      public final Parent getParent()
      Gets the value of the parent property.
      Property description:
      The parent of this Node. If this Node has not been added to a scene graph, then parent will be null.
      Default value:
      null
      Returns:
      the value of the parent property
      See Also:

    • parentProperty

      public final ReadOnlyObjectProperty<Parent> parentProperty()
      The parent of this Node. If this Node has not been added to a scene graph, then parent will be null.
      Default value:
      null
      Returns:
      the parent property
      See Also:

    • getScene

      public final Scene getScene()
      Gets the value of the scene property.
      Property description:
      The Scene that this Node is part of. If the Node is not part of a scene, then this variable will be null.
      Default value:
      null
      Returns:
      the value of the scene property
      See Also:

    • sceneProperty

      public final ReadOnlyObjectProperty<Scene> sceneProperty()
      The Scene that this Node is part of. If the Node is not part of a scene, then this variable will be null.
      Default value:
      null
      Returns:
      the scene property
      See Also:

    • setId

      public final void setId(String value)
      Sets the value of the id property.
      Property description:
      The id of this Node. This simple string identifier is useful for finding a specific Node within the scene graph. While the id of a Node should be unique within the scene graph, this uniqueness is not enforced. This is analogous to the "id" attribute on an HTML element (CSS ID Specification).

      For example, if a Node is given the id of "myId", then the lookup method can be used to find this node as follows: scene.lookup("#myId");.

      Default value:
      null
      Parameters:
      value - the value for the id property
      See Also:

    • getId

      public final String getId()
      The id of this Node. This simple string identifier is useful for finding a specific Node within the scene graph. While the id of a Node should be unique within the scene graph, this uniqueness is not enforced. This is analogous to the "id" attribute on an HTML element (CSS ID Specification).
      Specified by:
      getId in interface Styleable
      Default value:
      null
      Returns:
      the id assigned to this Node using the setId method or null, if no id has been assigned.
      See Also:

    • idProperty

      public final StringProperty idProperty()
      The id of this Node. This simple string identifier is useful for finding a specific Node within the scene graph. While the id of a Node should be unique within the scene graph, this uniqueness is not enforced. This is analogous to the "id" attribute on an HTML element (CSS ID Specification).

      For example, if a Node is given the id of "myId", then the lookup method can be used to find this node as follows: scene.lookup("#myId");.

      Default value:
      null
      Returns:
      the id property
      See Also:

    • getStyleClass

      public final ObservableList<String> getStyleClass()
      Description copied from interface: Styleable
      A list of String identifiers which can be used to logically group Nodes, specifically for an external style engine. This variable is analogous to the "class" attribute on an HTML element and, as such, each element of the list is a style class to which this Node belongs.
      Specified by:
      getStyleClass in interface Styleable
      Returns:
      a list of String identifiers which can be used to logically group Nodes, specifically for an external style engine
      See Also:

    • setStyle

      public final void setStyle(String value)
      A string representation of the CSS style associated with this specific Node. This is analogous to the "style" attribute of an HTML element. Note that, like the HTML style attribute, this variable contains style properties and values and not the selector portion of a style rule.
      Default value:
      empty string
      Parameters:
      value - The inline CSS style to use for this Node. null is implicitly converted to an empty String.
      See Also:

    • getStyle

      public final String getStyle()
      A string representation of the CSS style associated with this specific Node. This is analogous to the "style" attribute of an HTML element. Note that, like the HTML style attribute, this variable contains style properties and values and not the selector portion of a style rule.
      Specified by:
      getStyle in interface Styleable
      Default value:
      empty string
      Returns:
      The inline CSS style associated with this Node. If this Node does not have an inline style, an empty String is returned.
      See Also:

    • styleProperty

      public final StringProperty styleProperty()
      A string representation of the CSS style associated with this specific Node. This is analogous to the "style" attribute of an HTML element. Note that, like the HTML style attribute, this variable contains style properties and values and not the selector portion of a style rule.
      Default value:
      empty string
      Returns:
      the style property
      See Also:

    • setVisible

      public final void setVisible(boolean value)
      Sets the value of the visible property.
      Property description:
      Specifies whether this Node and any subnodes should be rendered as part of the scene graph. A node may be visible and yet not be shown in the rendered scene if, for instance, it is off the screen or obscured by another Node. Invisible nodes never receive mouse events or keyboard focus and never maintain keyboard focus when they become invisible.
      Default value:
      true
      Parameters:
      value - the value for the visible property
      See Also:

    • isVisible

      public final boolean isVisible()
      Gets the value of the visible property.
      Property description:
      Specifies whether this Node and any subnodes should be rendered as part of the scene graph. A node may be visible and yet not be shown in the rendered scene if, for instance, it is off the screen or obscured by another Node. Invisible nodes never receive mouse events or keyboard focus and never maintain keyboard focus when they become invisible.
      Default value:
      true
      Returns:
      the value of the visible property
      See Also:

    • visibleProperty

      public final BooleanProperty visibleProperty()
      Specifies whether this Node and any subnodes should be rendered as part of the scene graph. A node may be visible and yet not be shown in the rendered scene if, for instance, it is off the screen or obscured by another Node. Invisible nodes never receive mouse events or keyboard focus and never maintain keyboard focus when they become invisible.
      Default value:
      true
      Returns:
      the visible property
      See Also:

    • setCursor

      public final void setCursor(Cursor value)
      Sets the value of the cursor property.
      Property description:
      Defines the mouse cursor for this Node and subnodes. If null, then the cursor of the first parent node with a non-null cursor will be used. If no Node in the scene graph defines a cursor, then the cursor of the Scene will be used.
      Default value:
      null
      Parameters:
      value - the value for the cursor property
      See Also:

    • getCursor

      public final Cursor getCursor()
      Gets the value of the cursor property.
      Property description:
      Defines the mouse cursor for this Node and subnodes. If null, then the cursor of the first parent node with a non-null cursor will be used. If no Node in the scene graph defines a cursor, then the cursor of the Scene will be used.
      Default value:
      null
      Returns:
      the value of the cursor property
      See Also:

    • cursorProperty

      public final ObjectProperty<Cursor> cursorProperty()
      Defines the mouse cursor for this Node and subnodes. If null, then the cursor of the first parent node with a non-null cursor will be used. If no Node in the scene graph defines a cursor, then the cursor of the Scene will be used.
      Default value:
      null
      Returns:
      the mouse cursor for this Node and subnodes
      See Also:

    • setOpacity

      public final void setOpacity(double value)
      Sets the value of the opacity property.
      Property description:
      Specifies how opaque (that is, solid) the Node appears. A Node with 0% opacity is fully translucent. That is, while it is still visible and rendered, you generally won't be able to see it. The exception to this rule is when the Node is combined with a blending mode and blend effect in which case a translucent Node may still have an impact in rendering. An opacity of 50% will render the node as being 50% transparent.

      A visible node with any opacity setting still receives mouse events and can receive keyboard focus. For example, if you want to have a large invisible rectangle overlay all Nodes in the scene graph in order to intercept mouse events but not be visible to the user, you could create a large Rectangle that had an opacity of 0%.

      Opacity is specified as a value between 0 and 1. Values less than 0 are treated as 0, values greater than 1 are treated as 1.

      On some platforms ImageView might not support opacity variable.

      There is a known limitation of mixing opacity < 1.0 with a 3D Transform. Opacity/Blending is essentially a 2D image operation. The result of an opacity < 1.0 set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      1.0
      Parameters:
      value - the value for the opacity property
      See Also:

    • getOpacity

      public final double getOpacity()
      Gets the value of the opacity property.
      Property description:
      Specifies how opaque (that is, solid) the Node appears. A Node with 0% opacity is fully translucent. That is, while it is still visible and rendered, you generally won't be able to see it. The exception to this rule is when the Node is combined with a blending mode and blend effect in which case a translucent Node may still have an impact in rendering. An opacity of 50% will render the node as being 50% transparent.

      A visible node with any opacity setting still receives mouse events and can receive keyboard focus. For example, if you want to have a large invisible rectangle overlay all Nodes in the scene graph in order to intercept mouse events but not be visible to the user, you could create a large Rectangle that had an opacity of 0%.

      Opacity is specified as a value between 0 and 1. Values less than 0 are treated as 0, values greater than 1 are treated as 1.

      On some platforms ImageView might not support opacity variable.

      There is a known limitation of mixing opacity < 1.0 with a 3D Transform. Opacity/Blending is essentially a 2D image operation. The result of an opacity < 1.0 set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      1.0
      Returns:
      the value of the opacity property
      See Also:

    • opacityProperty

      public final DoubleProperty opacityProperty()
      Specifies how opaque (that is, solid) the Node appears. A Node with 0% opacity is fully translucent. That is, while it is still visible and rendered, you generally won't be able to see it. The exception to this rule is when the Node is combined with a blending mode and blend effect in which case a translucent Node may still have an impact in rendering. An opacity of 50% will render the node as being 50% transparent.

      A visible node with any opacity setting still receives mouse events and can receive keyboard focus. For example, if you want to have a large invisible rectangle overlay all Nodes in the scene graph in order to intercept mouse events but not be visible to the user, you could create a large Rectangle that had an opacity of 0%.

      Opacity is specified as a value between 0 and 1. Values less than 0 are treated as 0, values greater than 1 are treated as 1.

      On some platforms ImageView might not support opacity variable.

      There is a known limitation of mixing opacity < 1.0 with a 3D Transform. Opacity/Blending is essentially a 2D image operation. The result of an opacity < 1.0 set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      1.0
      Returns:
      the opacity property
      See Also:

    • setBlendMode

      public final void setBlendMode(BlendMode value)
      Sets the value of the blendMode property.
      Property description:
      The BlendMode used to blend this individual node into the scene behind it. If this node is a Group, then all of the children will be composited individually into a temporary buffer using their own blend modes and then that temporary buffer will be composited into the scene using the specified blend mode. A value of null is treated as pass-through. This means no effect on a parent (such as a Group), and the equivalent of SRC_OVER for a single Node.
      Default value:
      null
      Parameters:
      value - the value for the blendMode property
      See Also:

    • getBlendMode

      public final BlendMode getBlendMode()
      Gets the value of the blendMode property.
      Property description:
      The BlendMode used to blend this individual node into the scene behind it. If this node is a Group, then all of the children will be composited individually into a temporary buffer using their own blend modes and then that temporary buffer will be composited into the scene using the specified blend mode. A value of null is treated as pass-through. This means no effect on a parent (such as a Group), and the equivalent of SRC_OVER for a single Node.
      Default value:
      null
      Returns:
      the value of the blendMode property
      See Also:

    • blendModeProperty

      public final ObjectProperty<BlendMode> blendModeProperty()
      The BlendMode used to blend this individual node into the scene behind it. If this node is a Group, then all of the children will be composited individually into a temporary buffer using their own blend modes and then that temporary buffer will be composited into the scene using the specified blend mode. A value of null is treated as pass-through. This means no effect on a parent (such as a Group), and the equivalent of SRC_OVER for a single Node.
      Default value:
      null
      Returns:
      the blendMode property
      See Also:

    • setClip

      public final void setClip(Node value)
      Sets the value of the clip property.
      Property description:
      Specifies a Node to use to define the clipping shape for this Node. This clipping Node is not a child of this Node in the scene graph sense. Rather, it is used to define the clip for this Node.

      For example, you can use an ImageView Node as a mask to represent the Clip. Or you could use one of the geometric shape Nodes such as Rectangle or Circle. Or you could use a Text node to represent the Clip.

      See the class documentation for Node for scene graph structure restrictions on setting the clip. If these restrictions are violated by a change to the clip variable, the change is ignored and the previous value of the clip variable is restored.

      Note that this is a conditional feature. See ConditionalFeature.SHAPE_CLIP for more information.

      There is a known limitation of mixing Clip with a 3D Transform. Clipping is essentially a 2D image operation. The result of a Clip set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      null
      Parameters:
      value - the value for the clip property
      See Also:

    • getClip

      public final Node getClip()
      Gets the value of the clip property.
      Property description:
      Specifies a Node to use to define the clipping shape for this Node. This clipping Node is not a child of this Node in the scene graph sense. Rather, it is used to define the clip for this Node.

      For example, you can use an ImageView Node as a mask to represent the Clip. Or you could use one of the geometric shape Nodes such as Rectangle or Circle. Or you could use a Text node to represent the Clip.

      See the class documentation for Node for scene graph structure restrictions on setting the clip. If these restrictions are violated by a change to the clip variable, the change is ignored and the previous value of the clip variable is restored.

      Note that this is a conditional feature. See ConditionalFeature.SHAPE_CLIP for more information.

      There is a known limitation of mixing Clip with a 3D Transform. Clipping is essentially a 2D image operation. The result of a Clip set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      null
      Returns:
      the value of the clip property
      See Also:

    • clipProperty

      public final ObjectProperty<Node> clipProperty()
      Specifies a Node to use to define the clipping shape for this Node. This clipping Node is not a child of this Node in the scene graph sense. Rather, it is used to define the clip for this Node.

      For example, you can use an ImageView Node as a mask to represent the Clip. Or you could use one of the geometric shape Nodes such as Rectangle or Circle. Or you could use a Text node to represent the Clip.

      See the class documentation for Node for scene graph structure restrictions on setting the clip. If these restrictions are violated by a change to the clip variable, the change is ignored and the previous value of the clip variable is restored.

      Note that this is a conditional feature. See ConditionalFeature.SHAPE_CLIP for more information.

      There is a known limitation of mixing Clip with a 3D Transform. Clipping is essentially a 2D image operation. The result of a Clip set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      null
      Returns:
      the the clipping shape for this Node
      See Also:

    • setCache

      public final void setCache(boolean value)
      Sets the value of the cache property.
      Property description:
      A performance hint to the system to indicate that this Node should be cached as a bitmap. Rendering a bitmap representation of a node will be faster than rendering primitives in many cases, especially in the case of primitives with effects applied (such as a blur). However, it also increases memory usage. This hint indicates whether that trade-off (increased memory usage for increased performance) is worthwhile. Also note that on some platforms such as GPU accelerated platforms there is little benefit to caching Nodes as bitmaps when blurs and other effects are used since they are very fast to render on the GPU. The cacheHintProperty() variable provides additional options for enabling more aggressive bitmap caching.

      Caching may be disabled for any node that has a 3D transform on itself, any of its ancestors, or any of its descendants.

      Default value:
      false
      Parameters:
      value - the value for the cache property
      See Also:

    • isCache

      public final boolean isCache()
      Gets the value of the cache property.
      Property description:
      A performance hint to the system to indicate that this Node should be cached as a bitmap. Rendering a bitmap representation of a node will be faster than rendering primitives in many cases, especially in the case of primitives with effects applied (such as a blur). However, it also increases memory usage. This hint indicates whether that trade-off (increased memory usage for increased performance) is worthwhile. Also note that on some platforms such as GPU accelerated platforms there is little benefit to caching Nodes as bitmaps when blurs and other effects are used since they are very fast to render on the GPU. The cacheHintProperty() variable provides additional options for enabling more aggressive bitmap caching.

      Caching may be disabled for any node that has a 3D transform on itself, any of its ancestors, or any of its descendants.

      Default value:
      false
      Returns:
      the value of the cache property
      See Also:

    • cacheProperty

      public final BooleanProperty cacheProperty()
      A performance hint to the system to indicate that this Node should be cached as a bitmap. Rendering a bitmap representation of a node will be faster than rendering primitives in many cases, especially in the case of primitives with effects applied (such as a blur). However, it also increases memory usage. This hint indicates whether that trade-off (increased memory usage for increased performance) is worthwhile. Also note that on some platforms such as GPU accelerated platforms there is little benefit to caching Nodes as bitmaps when blurs and other effects are used since they are very fast to render on the GPU. The cacheHintProperty() variable provides additional options for enabling more aggressive bitmap caching.

      Caching may be disabled for any node that has a 3D transform on itself, any of its ancestors, or any of its descendants.

      Default value:
      false
      Returns:
      the hint to cache for this Node
      See Also:

    • setCacheHint

      public final void setCacheHint(CacheHint value)
      Sets the value of the cacheHint property.
      Property description:
      Additional hint for controlling bitmap caching.

      Under certain circumstances, such as animating nodes that are very expensive to render, it is desirable to be able to perform transformations on the node without having to regenerate the cached bitmap. An option in such cases is to perform the transforms on the cached bitmap itself.

      This technique can provide a dramatic improvement to animation performance, though may also result in a reduction in visual quality. The cacheHint variable provides a hint to the system about how and when that trade-off (visual quality for animation performance) is acceptable.

      It is possible to enable the cacheHint only at times when your node is animating. In this way, expensive nodes can appear on screen with full visual quality, yet still animate smoothly.

      Example: 

      
        expensiveNode.setCache(true);
        expensiveNode.setCacheHint(CacheHint.QUALITY);
        ...
        // Do an animation
        expensiveNode.setCacheHint(CacheHint.SPEED);
        new Timeline(
            new KeyFrame(Duration.seconds(2),
                new KeyValue(expensiveNode.scaleXProperty(), 2.0),
                new KeyValue(expensiveNode.scaleYProperty(), 2.0),
                new KeyValue(expensiveNode.rotateProperty(), 360),
                new KeyValue(expensiveNode.cacheHintProperty(), CacheHint.QUALITY)
            )
        ).play();
      Note that cacheHint is only a hint to the system. Depending on the details of the node or the transform, this hint may be ignored.

      If Node.cache is false, cacheHint is ignored. Caching may be disabled for any node that has a 3D transform on itself, any of its ancestors, or any of its descendants.

      Default value:
      CacheHint.DEFAULT
      Parameters:
      value - the value for the cacheHint property
      See Also:

    • getCacheHint

      public final CacheHint getCacheHint()
      Gets the value of the cacheHint property.
      Property description:
      Additional hint for controlling bitmap caching.

      Under certain circumstances, such as animating nodes that are very expensive to render, it is desirable to be able to perform transformations on the node without having to regenerate the cached bitmap. An option in such cases is to perform the transforms on the cached bitmap itself.

      This technique can provide a dramatic improvement to animation performance, though may also result in a reduction in visual quality. The cacheHint variable provides a hint to the system about how and when that trade-off (visual quality for animation performance) is acceptable.

      It is possible to enable the cacheHint only at times when your node is animating. In this way, expensive nodes can appear on screen with full visual quality, yet still animate smoothly.

      Example: 

      
        expensiveNode.setCache(true);
        expensiveNode.setCacheHint(CacheHint.QUALITY);
        ...
        // Do an animation
        expensiveNode.setCacheHint(CacheHint.SPEED);
        new Timeline(
            new KeyFrame(Duration.seconds(2),
                new KeyValue(expensiveNode.scaleXProperty(), 2.0),
                new KeyValue(expensiveNode.scaleYProperty(), 2.0),
                new KeyValue(expensiveNode.rotateProperty(), 360),
                new KeyValue(expensiveNode.cacheHintProperty(), CacheHint.QUALITY)
            )
        ).play();
      Note that cacheHint is only a hint to the system. Depending on the details of the node or the transform, this hint may be ignored.

      If Node.cache is false, cacheHint is ignored. Caching may be disabled for any node that has a 3D transform on itself, any of its ancestors, or any of its descendants.

      Default value:
      CacheHint.DEFAULT
      Returns:
      the value of the cacheHint property
      See Also:

    • cacheHintProperty

      public final ObjectProperty<CacheHint> cacheHintProperty()
      Additional hint for controlling bitmap caching.

      Under certain circumstances, such as animating nodes that are very expensive to render, it is desirable to be able to perform transformations on the node without having to regenerate the cached bitmap. An option in such cases is to perform the transforms on the cached bitmap itself.

      This technique can provide a dramatic improvement to animation performance, though may also result in a reduction in visual quality. The cacheHint variable provides a hint to the system about how and when that trade-off (visual quality for animation performance) is acceptable.

      It is possible to enable the cacheHint only at times when your node is animating. In this way, expensive nodes can appear on screen with full visual quality, yet still animate smoothly.

      Example: 

      
        expensiveNode.setCache(true);
        expensiveNode.setCacheHint(CacheHint.QUALITY);
        ...
        // Do an animation
        expensiveNode.setCacheHint(CacheHint.SPEED);
        new Timeline(
            new KeyFrame(Duration.seconds(2),
                new KeyValue(expensiveNode.scaleXProperty(), 2.0),
                new KeyValue(expensiveNode.scaleYProperty(), 2.0),
                new KeyValue(expensiveNode.rotateProperty(), 360),
                new KeyValue(expensiveNode.cacheHintProperty(), CacheHint.QUALITY)
            )
        ).play();
      Note that cacheHint is only a hint to the system. Depending on the details of the node or the transform, this hint may be ignored.

      If Node.cache is false, cacheHint is ignored. Caching may be disabled for any node that has a 3D transform on itself, any of its ancestors, or any of its descendants.

      Default value:
      CacheHint.DEFAULT
      Returns:
      the CacheHint for this Node
      See Also:

    • setEffect

      public final void setEffect(Effect value)
      Sets the value of the effect property.
      Property description:
      Specifies an effect to apply to this Node.

      Note that this is a conditional feature. See ConditionalFeature.EFFECT for more information.

      There is a known limitation of mixing Effect with a 3D Transform. Effect is essentially a 2D image operation. The result of an Effect set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      null
      Parameters:
      value - the value for the effect property
      See Also:

    • getEffect

      public final Effect getEffect()
      Gets the value of the effect property.
      Property description:
      Specifies an effect to apply to this Node.

      Note that this is a conditional feature. See ConditionalFeature.EFFECT for more information.

      There is a known limitation of mixing Effect with a 3D Transform. Effect is essentially a 2D image operation. The result of an Effect set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      null
      Returns:
      the value of the effect property
      See Also:

    • effectProperty

      public final ObjectProperty<Effect> effectProperty()
      Specifies an effect to apply to this Node.

      Note that this is a conditional feature. See ConditionalFeature.EFFECT for more information.

      There is a known limitation of mixing Effect with a 3D Transform. Effect is essentially a 2D image operation. The result of an Effect set on a Group node with 3D transformed children will cause its children to be rendered in order without Z-buffering applied between those children.

      Default value:
      null
      Returns:
      the effect for this Node
      See Also:

    • setDepthTest

      public final void setDepthTest(DepthTest value)
      Sets the value of the depthTest property.
      Property description:
      Indicates whether depth testing is used when rendering this node. If the depthTest flag is DepthTest.DISABLE, then depth testing is disabled for this node. If the depthTest flag is DepthTest.ENABLE, then depth testing is enabled for this node. If the depthTest flag is DepthTest.INHERIT, then depth testing is enabled for this node if it is enabled for the parent node or the parent node is null.

      The depthTest flag is only used when the depthBuffer flag for the Scene is true (meaning that the Scene has an associated depth buffer)

      Depth test comparison is only done among nodes with depthTest enabled. A node with depthTest disabled does not read, test, or write the depth buffer, that is to say its Z value will not be considered for depth testing with other nodes.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      See the constructor in Scene with depthBuffer as one of its input arguments.

      Default value:
      INHERIT
      Parameters:
      value - the value for the depthTest property
      See Also:

    • getDepthTest

      public final DepthTest getDepthTest()
      Gets the value of the depthTest property.
      Property description:
      Indicates whether depth testing is used when rendering this node. If the depthTest flag is DepthTest.DISABLE, then depth testing is disabled for this node. If the depthTest flag is DepthTest.ENABLE, then depth testing is enabled for this node. If the depthTest flag is DepthTest.INHERIT, then depth testing is enabled for this node if it is enabled for the parent node or the parent node is null.

      The depthTest flag is only used when the depthBuffer flag for the Scene is true (meaning that the Scene has an associated depth buffer)

      Depth test comparison is only done among nodes with depthTest enabled. A node with depthTest disabled does not read, test, or write the depth buffer, that is to say its Z value will not be considered for depth testing with other nodes.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      See the constructor in Scene with depthBuffer as one of its input arguments.

      Default value:
      INHERIT
      Returns:
      the value of the depthTest property
      See Also:

    • depthTestProperty

      public final ObjectProperty<DepthTest> depthTestProperty()
      Indicates whether depth testing is used when rendering this node. If the depthTest flag is DepthTest.DISABLE, then depth testing is disabled for this node. If the depthTest flag is DepthTest.ENABLE, then depth testing is enabled for this node. If the depthTest flag is DepthTest.INHERIT, then depth testing is enabled for this node if it is enabled for the parent node or the parent node is null.

      The depthTest flag is only used when the depthBuffer flag for the Scene is true (meaning that the Scene has an associated depth buffer)

      Depth test comparison is only done among nodes with depthTest enabled. A node with depthTest disabled does not read, test, or write the depth buffer, that is to say its Z value will not be considered for depth testing with other nodes.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      See the constructor in Scene with depthBuffer as one of its input arguments.

      Default value:
      INHERIT
      Returns:
      the depth test setting for this Node
      See Also:

    • setDisable

      public final void setDisable(boolean value)
      Sets the value of the disable property.
      Property description:
      Defines the individual disabled state of this Node. Setting disable to true will cause this Node and any subnodes to become disabled. This property should be used only to set the disabled state of a Node. For querying the disabled state of a Node, the disabled property should instead be used, since it is possible that a Node was disabled as a result of an ancestor being disabled even if the individual disable state on this Node is false.
      Default value:
      false
      Parameters:
      value - the value for the disable property
      See Also:

    • isDisable

      public final boolean isDisable()
      Gets the value of the disable property.
      Property description:
      Defines the individual disabled state of this Node. Setting disable to true will cause this Node and any subnodes to become disabled. This property should be used only to set the disabled state of a Node. For querying the disabled state of a Node, the disabled property should instead be used, since it is possible that a Node was disabled as a result of an ancestor being disabled even if the individual disable state on this Node is false.
      Default value:
      false
      Returns:
      the value of the disable property
      See Also:

    • disableProperty

      public final BooleanProperty disableProperty()
      Defines the individual disabled state of this Node. Setting disable to true will cause this Node and any subnodes to become disabled. This property should be used only to set the disabled state of a Node. For querying the disabled state of a Node, the disabled property should instead be used, since it is possible that a Node was disabled as a result of an ancestor being disabled even if the individual disable state on this Node is false.
      Default value:
      false
      Returns:
      the disabled state for this Node
      See Also:

    • setPickOnBounds

      public final void setPickOnBounds(boolean value)
      Sets the value of the pickOnBounds property.
      Property description:
      Defines how the picking computation is done for this node when triggered by a MouseEvent or a contains function call. If pickOnBounds is true, then picking is computed by intersecting with the bounds of this node, else picking is computed by intersecting with the geometric shape of this node. The default value of this property is false unless overridden by a subclass. The default value is true for Region.
      Default value:
      false; true for Region
      Parameters:
      value - the value for the pickOnBounds property
      See Also:

    • isPickOnBounds

      public final boolean isPickOnBounds()
      Gets the value of the pickOnBounds property.
      Property description:
      Defines how the picking computation is done for this node when triggered by a MouseEvent or a contains function call. If pickOnBounds is true, then picking is computed by intersecting with the bounds of this node, else picking is computed by intersecting with the geometric shape of this node. The default value of this property is false unless overridden by a subclass. The default value is true for Region.
      Default value:
      false; true for Region
      Returns:
      the value of the pickOnBounds property
      See Also:

    • pickOnBoundsProperty

      public final BooleanProperty pickOnBoundsProperty()
      Defines how the picking computation is done for this node when triggered by a MouseEvent or a contains function call. If pickOnBounds is true, then picking is computed by intersecting with the bounds of this node, else picking is computed by intersecting with the geometric shape of this node. The default value of this property is false unless overridden by a subclass. The default value is true for Region.
      Default value:
      false; true for Region
      Returns:
      the pickOnBounds property
      See Also:

    • setDisabled

      protected final void setDisabled(boolean value)
      Sets the value of the disabled property.
      Property description:
      Indicates whether or not this Node is disabled. A Node will become disabled if disable is set to true on either itself or one of its ancestors in the scene graph.

      A disabled Node should render itself differently to indicate its disabled state to the user. Such disabled rendering is dependent on the implementation of the Node. The shape classes contained in javafx.scene.shape do not implement such rendering by default, therefore applications using shapes for handling input must implement appropriate disabled rendering themselves. The user-interface controls defined in javafx.scene.control will implement disabled-sensitive rendering, however.

      A disabled Node does not receive mouse or key events.

      Default value:
      false
      Parameters:
      value - the value for the disabled property
      See Also:

    • isDisabled

      public final boolean isDisabled()
      Gets the value of the disabled property.
      Property description:
      Indicates whether or not this Node is disabled. A Node will become disabled if disable is set to true on either itself or one of its ancestors in the scene graph.

      A disabled Node should render itself differently to indicate its disabled state to the user. Such disabled rendering is dependent on the implementation of the Node. The shape classes contained in javafx.scene.shape do not implement such rendering by default, therefore applications using shapes for handling input must implement appropriate disabled rendering themselves. The user-interface controls defined in javafx.scene.control will implement disabled-sensitive rendering, however.

      A disabled Node does not receive mouse or key events.

      Default value:
      false
      Returns:
      the value of the disabled property
      See Also:

    • disabledProperty

      public final ReadOnlyBooleanProperty disabledProperty()
      Indicates whether or not this Node is disabled. A Node will become disabled if disable is set to true on either itself or one of its ancestors in the scene graph.

      A disabled Node should render itself differently to indicate its disabled state to the user. Such disabled rendering is dependent on the implementation of the Node. The shape classes contained in javafx.scene.shape do not implement such rendering by default, therefore applications using shapes for handling input must implement appropriate disabled rendering themselves. The user-interface controls defined in javafx.scene.control will implement disabled-sensitive rendering, however.

      A disabled Node does not receive mouse or key events.

      Default value:
      false
      Returns:
      the disabled property
      See Also:

    • lookup

      public Node lookup(String selector)
      Finds this Node, or the first sub-node, based on the given CSS selector. If this node is a Parent, then this function will traverse down into the branch until it finds a match. If more than one sub-node matches the specified selector, this function returns the first of them.

      If the lookup selector does not specify a pseudo class, the lookup will ignore pseudo class states; it will return the first matching node whether or not it contains pseudo classes.

      For example, if a Node is given the id of "myId", then the lookup method can be used to find this node as follows: scene.lookup("#myId");.

      For example, if two nodes, NodeA and NodeB, have the same style class "myStyle" and NodeA has a pseudo state "myPseudo", then to find NodeA, the lookup method can be used as follows: scene.lookup(".myStyle:myPseudo"); or scene.lookup(":myPseudo");.

      Parameters:
      selector - The css selector of the node to find
      Returns:
      The first node, starting from this Node, which matches the CSS selector, null if none is found.

    • lookupAll

      public Set<Node> lookupAll(String selector)
      Finds all Nodes, including this one and any children, which match the given CSS selector. If no matches are found, an empty unmodifiable set is returned. The set is explicitly unordered.

      If the lookupAll selector does not specify a pseudo class, the lookupAll will ignore pseudo class states; it will return all matching nodes whether or not the nodes contain pseudo classes.

      For example, if there are multiple nodes with same style class "myStyle", then the lookupAll method can be used to find all these nodes as follows: scene.lookupAll(".myStyle");.

      For example, if multiple nodes have same style class "myStyle" and few nodes have a pseudo state "myPseudo", then to find all nodes with "myPseudo" state, the lookupAll method can be used as follows: scene.lookupAll(".myStyle:myPseudo"); or scene.lookupAll(":myPseudo");.

      Parameters:
      selector - The css selector of the nodes to find
      Returns:
      All nodes, starting from and including this Node, which match the CSS selector. The returned set is always unordered and unmodifiable, and never null.

    • toBack

      public void toBack()
      Moves this Node to the back of its sibling nodes in terms of z-order. This is accomplished by moving this Node to the first position in its parent's content ObservableList. This function has no effect if this Node is not part of a group.

    • toFront

      public void toFront()
      Moves this Node to the front of its sibling nodes in terms of z-order. This is accomplished by moving this Node to the last position in its parent's content ObservableList. This function has no effect if this Node is not part of a group.

    • snapshot

      public WritableImage snapshot(SnapshotParameters params, WritableImage image)
      Takes a snapshot of this node and returns the rendered image when it is ready. CSS and layout processing will be done for the node, and any of its children, prior to rendering it. The entire destination image is cleared to the fill Paint specified by the SnapshotParameters. This node is then rendered to the image. If the viewport specified by the SnapshotParameters is null, the upper-left pixel of the boundsInParent of this node, after first applying the transform specified by the SnapshotParameters, is mapped to the upper-left pixel (0,0) in the image. If a non-null viewport is specified, the upper-left pixel of the viewport is mapped to upper-left pixel (0,0) in the image. In both cases, this mapping to (0,0) of the image is done with an integer translation. The portion of the node that is outside of the rendered image will be clipped by the image.

      When taking a snapshot of a scene that is being animated, either explicitly by the application or implicitly (such as chart animation), the snapshot will be rendered based on the state of the scene graph at the moment the snapshot is taken and will not reflect any subsequent animation changes.

      NOTE: In order for CSS and layout to function correctly, the node must be part of a Scene (the Scene may be attached to a Stage, but need not be).

      Parameters:
      params - the snapshot parameters containing attributes that will control the rendering. If the SnapshotParameters object is null, then the Scene's attributes will be used if this node is part of a scene, or default attributes will be used if this node is not part of a scene.
      image - the writable image that will be used to hold the rendered node. It may be null in which case a new WritableImage will be constructed. The new image is constructed using integer width and height values that are derived either from the transformed bounds of this Node or from the size of the viewport as specified in the SnapShotParameters. These integer values are chosen such that the image will wholly contain the bounds of this Node or the specified viewport. If the image is non-null, the node will be rendered into the existing image. In this case, the width and height of the image determine the area that is rendered instead of the width and height of the bounds or viewport.
      Returns:
      the rendered image
      Throws:
      IllegalStateException - if this method is called on a thread other than the JavaFX Application Thread.
      Since:
      JavaFX 2.2

    • snapshot

      public void snapshot(Callback<SnapshotResult,Void> callback, SnapshotParameters params, WritableImage image)
      Takes a snapshot of this node at the next frame and calls the specified callback method when the image is ready. CSS and layout processing will be done for the node, and any of its children, prior to rendering it. The entire destination image is cleared to the fill Paint specified by the SnapshotParameters. This node is then rendered to the image. If the viewport specified by the SnapshotParameters is null, the upper-left pixel of the boundsInParent of this node, after first applying the transform specified by the SnapshotParameters, is mapped to the upper-left pixel (0,0) in the image. If a non-null viewport is specified, the upper-left pixel of the viewport is mapped to upper-left pixel (0,0) in the image. In both cases, this mapping to (0,0) of the image is done with an integer translation. The portion of the node that is outside of the rendered image will be clipped by the image.

      This is an asynchronous call, which means that other events or animation might be processed before the node is rendered. If any such events modify the node, or any of its children, that modification will be reflected in the rendered image (just like it will also be reflected in the frame rendered to the Stage, if this node is part of a live scene graph).

      When taking a snapshot of a node that is being animated, either explicitly by the application or implicitly (such as chart animation), the snapshot will be rendered based on the state of the scene graph at the moment the snapshot is taken and will not reflect any subsequent animation changes.

      NOTE: In order for CSS and layout to function correctly, the node must be part of a Scene (the Scene may be attached to a Stage, but need not be).

      Parameters:
      callback - a class whose call method will be called when the image is ready. The SnapshotResult that is passed into the call method of the callback will contain the rendered image, the source node that was rendered, and a copy of the SnapshotParameters. The callback parameter must not be null.
      params - the snapshot parameters containing attributes that will control the rendering. If the SnapshotParameters object is null, then the Scene's attributes will be used if this node is part of a scene, or default attributes will be used if this node is not part of a scene.
      image - the writable image that will be used to hold the rendered node. It may be null in which case a new WritableImage will be constructed. The new image is constructed using integer width and height values that are derived either from the transformed bounds of this Node or from the size of the viewport as specified in the SnapShotParameters. These integer values are chosen such that the image will wholly contain the bounds of this Node or the specified viewport. If the image is non-null, the node will be rendered into the existing image. In this case, the width and height of the image determine the area that is rendered instead of the width and height of the bounds or viewport.
      Throws:
      IllegalStateException - if this method is called on a thread other than the JavaFX Application Thread.
      NullPointerException - if the callback parameter is null.
      Since:
      JavaFX 2.2

    • setOnDragEntered

      public final void setOnDragEntered(EventHandler<? super DragEvent> value)
      Sets the value of the onDragEntered property.
      Property description:
      Defines a function to be called when drag gesture enters this Node.
      Parameters:
      value - the value for the onDragEntered property
      See Also:

    • getOnDragEntered

      public final EventHandler<? super DragEvent> getOnDragEntered()
      Gets the value of the onDragEntered property.
      Property description:
      Defines a function to be called when drag gesture enters this Node.
      Returns:
      the value of the onDragEntered property
      See Also:

    • onDragEnteredProperty

      public final ObjectProperty<EventHandler<? super DragEvent>> onDragEnteredProperty()
      Defines a function to be called when drag gesture enters this Node.
      Returns:
      the event handler that is called when drag gesture enters this Node
      See Also:

    • setOnDragExited

      public final void setOnDragExited(EventHandler<? super DragEvent> value)
      Sets the value of the onDragExited property.
      Property description:
      Defines a function to be called when drag gesture exits this Node.
      Parameters:
      value - the value for the onDragExited property
      See Also:

    • getOnDragExited

      public final EventHandler<? super DragEvent> getOnDragExited()
      Gets the value of the onDragExited property.
      Property description:
      Defines a function to be called when drag gesture exits this Node.
      Returns:
      the value of the onDragExited property
      See Also:

    • onDragExitedProperty

      public final ObjectProperty<EventHandler<? super DragEvent>> onDragExitedProperty()
      Defines a function to be called when drag gesture exits this Node.
      Returns:
      the event handler that is called when drag gesture exits this Node
      See Also:

    • setOnDragOver

      public final void setOnDragOver(EventHandler<? super DragEvent> value)
      Sets the value of the onDragOver property.
      Property description:
      Defines a function to be called when drag gesture progresses within this Node.
      Parameters:
      value - the value for the onDragOver property
      See Also:

    • getOnDragOver

      public final EventHandler<? super DragEvent> getOnDragOver()
      Gets the value of the onDragOver property.
      Property description:
      Defines a function to be called when drag gesture progresses within this Node.
      Returns:
      the value of the onDragOver property
      See Also:

    • onDragOverProperty

      public final ObjectProperty<EventHandler<? super DragEvent>> onDragOverProperty()
      Defines a function to be called when drag gesture progresses within this Node.
      Returns:
      the event handler that is called when drag gesture progresses within this Node
      See Also:

    • setOnDragDropped

      public final void setOnDragDropped(EventHandler<? super DragEvent> value)
      Sets the value of the onDragDropped property.
      Property description:
      Defines a function to be called when the mouse button is released on this Node during drag and drop gesture. Transfer of data from the DragEvent's dragboard should happen in this function.
      Parameters:
      value - the value for the onDragDropped property
      See Also:

    • getOnDragDropped

      public final EventHandler<? super DragEvent> getOnDragDropped()
      Gets the value of the onDragDropped property.
      Property description:
      Defines a function to be called when the mouse button is released on this Node during drag and drop gesture. Transfer of data from the DragEvent's dragboard should happen in this function.
      Returns:
      the value of the onDragDropped property
      See Also:

    • onDragDroppedProperty

      public final ObjectProperty<EventHandler<? super DragEvent>> onDragDroppedProperty()
      Defines a function to be called when the mouse button is released on this Node during drag and drop gesture. Transfer of data from the DragEvent's dragboard should happen in this function.
      Returns:
      the event handler that is called when the mouse button is released on this Node
      See Also:

    • setOnDragDone

      public final void setOnDragDone(EventHandler<? super DragEvent> value)
      Sets the value of the onDragDone property.
      Property description:
      Defines a function to be called when this Node is a drag and drop gesture source after its data has been dropped on a drop target. The transferMode of the event shows what just happened at the drop target. If transferMode has the value MOVE, then the source can clear out its data. Clearing the source's data gives the appropriate appearance to a user that the data has been moved by the drag and drop gesture. A transferMode that has the value NONE indicates that no data was transferred during the drag and drop gesture.
      Parameters:
      value - the value for the onDragDone property
      See Also:

    • getOnDragDone

      public final EventHandler<? super DragEvent> getOnDragDone()
      Gets the value of the onDragDone property.
      Property description:
      Defines a function to be called when this Node is a drag and drop gesture source after its data has been dropped on a drop target. The transferMode of the event shows what just happened at the drop target. If transferMode has the value MOVE, then the source can clear out its data. Clearing the source's data gives the appropriate appearance to a user that the data has been moved by the drag and drop gesture. A transferMode that has the value NONE indicates that no data was transferred during the drag and drop gesture.
      Returns:
      the value of the onDragDone property
      See Also:

    • onDragDoneProperty

      public final ObjectProperty<EventHandler<? super DragEvent>> onDragDoneProperty()
      Defines a function to be called when this Node is a drag and drop gesture source after its data has been dropped on a drop target. The transferMode of the event shows what just happened at the drop target. If transferMode has the value MOVE, then the source can clear out its data. Clearing the source's data gives the appropriate appearance to a user that the data has been moved by the drag and drop gesture. A transferMode that has the value NONE indicates that no data was transferred during the drag and drop gesture.
      Returns:
      the event handler that is called when this Node is a drag and drop gesture source after its data has been dropped on a drop target
      See Also:

    • startDragAndDrop

      public Dragboard startDragAndDrop(TransferMode... transferModes)
      Confirms a potential drag and drop gesture that is recognized over this Node. Can be called only from a DRAG_DETECTED event handler. The returned Dragboard is used to transfer data during the drag and drop gesture. Placing this Node's data on the Dragboard also identifies this Node as the source of the drag and drop gesture. More detail about drag and drop gestures is described in the overivew of DragEvent.
      Parameters:
      transferModes - The supported TransferMode(s) of this Node
      Returns:
      A Dragboard to place this Node's data on
      Throws:
      IllegalStateException - if drag and drop cannot be started at this moment (it's called outside of DRAG_DETECTED event handling or this node is not in scene).
      See Also:

    • startFullDrag

      public void startFullDrag()
      Starts a full press-drag-release gesture with this node as gesture source. This method can be called only from a DRAG_DETECTED mouse event handler. More detail about dragging gestures can be found in the overview of MouseEvent and MouseDragEvent.
      Throws:
      IllegalStateException - if the full press-drag-release gesture cannot be started at this moment (it's called outside of DRAG_DETECTED event handling or this node is not in scene).
      Since:
      JavaFX 2.1
      See Also:

    • setManaged

      public final void setManaged(boolean value)
      Sets the value of the managed property.
      Property description:
      Defines whether or not this node's layout will be managed by it's parent. If the node is managed, it's parent will factor the node's geometry into its own preferred size and layoutBounds calculations and will lay it out during the scene's layout pass. If a managed node's layoutBounds changes, it will automatically trigger relayout up the scene-graph to the nearest layout root (which is typically the scene's root node).

      If the node is unmanaged, its parent will ignore the child in both preferred size computations and layout. Changes in layoutBounds will not trigger relayout above it. If an unmanaged node is of type Parent, it will act as a "layout root", meaning that calls to Parent.requestLayout() beneath it will cause only the branch rooted by the node to be relayed out, thereby isolating layout changes to that root and below. It's the application's responsibility to set the size and position of an unmanaged node.

      By default all nodes are managed.

      Parameters:
      value - the value for the managed property
      See Also:

    • isManaged

      public final boolean isManaged()
      Gets the value of the managed property.
      Property description:
      Defines whether or not this node's layout will be managed by it's parent. If the node is managed, it's parent will factor the node's geometry into its own preferred size and layoutBounds calculations and will lay it out during the scene's layout pass. If a managed node's layoutBounds changes, it will automatically trigger relayout up the scene-graph to the nearest layout root (which is typically the scene's root node).

      If the node is unmanaged, its parent will ignore the child in both preferred size computations and layout. Changes in layoutBounds will not trigger relayout above it. If an unmanaged node is of type Parent, it will act as a "layout root", meaning that calls to Parent.requestLayout() beneath it will cause only the branch rooted by the node to be relayed out, thereby isolating layout changes to that root and below. It's the application's responsibility to set the size and position of an unmanaged node.

      By default all nodes are managed.

      Returns:
      the value of the managed property
      See Also:

    • managedProperty

      public final BooleanProperty managedProperty()
      Defines whether or not this node's layout will be managed by it's parent. If the node is managed, it's parent will factor the node's geometry into its own preferred size and layoutBounds calculations and will lay it out during the scene's layout pass. If a managed node's layoutBounds changes, it will automatically trigger relayout up the scene-graph to the nearest layout root (which is typically the scene's root node).

      If the node is unmanaged, its parent will ignore the child in both preferred size computations and layout. Changes in layoutBounds will not trigger relayout above it. If an unmanaged node is of type Parent, it will act as a "layout root", meaning that calls to Parent.requestLayout() beneath it will cause only the branch rooted by the node to be relayed out, thereby isolating layout changes to that root and below. It's the application's responsibility to set the size and position of an unmanaged node.

      By default all nodes are managed.

      Returns:
      the managed property
      See Also:

    • setLayoutX

      public final void setLayoutX(double value)
      Sets the value of the layoutX property.
      Property description:
      Defines the x coordinate of the translation that is added to this Node's transform for the purpose of layout. The value should be computed as the offset required to adjust the position of the node from its current layoutBounds minX position (which might not be 0) to the desired location.

      For example, if textnode should be positioned at finalX 

      
     textnode.setLayoutX(finalX - textnode.getLayoutBounds().getMinX());

      Failure to subtract layoutBounds minX may result in misplacement of the node. The relocate(x, y) method will automatically do the correct computation and should generally be used over setting layoutX directly.

      The node's final translation will be computed as layoutX + translateX, where layoutX establishes the node's stable position and translateX optionally makes dynamic adjustments to that position.

      If the node is managed and has a Region as its parent, then the layout region will set layoutX according to its own layout policy. If the node is unmanaged or parented by a Group, then the application may set layoutX directly to position it.

      Parameters:
      value - the value for the layoutX property
      See Also:

    • getLayoutX

      public final double getLayoutX()
      Gets the value of the layoutX property.
      Property description:
      Defines the x coordinate of the translation that is added to this Node's transform for the purpose of layout. The value should be computed as the offset required to adjust the position of the node from its current layoutBounds minX position (which might not be 0) to the desired location.

      For example, if textnode should be positioned at finalX 

      
     textnode.setLayoutX(finalX - textnode.getLayoutBounds().getMinX());

      Failure to subtract layoutBounds minX may result in misplacement of the node. The relocate(x, y) method will automatically do the correct computation and should generally be used over setting layoutX directly.

      The node's final translation will be computed as layoutX + translateX, where layoutX establishes the node's stable position and translateX optionally makes dynamic adjustments to that position.

      If the node is managed and has a Region as its parent, then the layout region will set layoutX according to its own layout policy. If the node is unmanaged or parented by a Group, then the application may set layoutX directly to position it.

      Returns:
      the value of the layoutX property
      See Also:

    • layoutXProperty

      public final DoubleProperty layoutXProperty()
      Defines the x coordinate of the translation that is added to this Node's transform for the purpose of layout. The value should be computed as the offset required to adjust the position of the node from its current layoutBounds minX position (which might not be 0) to the desired location.

      For example, if textnode should be positioned at finalX 

      
     textnode.setLayoutX(finalX - textnode.getLayoutBounds().getMinX());

      Failure to subtract layoutBounds minX may result in misplacement of the node. The relocate(x, y) method will automatically do the correct computation and should generally be used over setting layoutX directly.

      The node's final translation will be computed as layoutX + translateX, where layoutX establishes the node's stable position and translateX optionally makes dynamic adjustments to that position.

      If the node is managed and has a Region as its parent, then the layout region will set layoutX according to its own layout policy. If the node is unmanaged or parented by a Group, then the application may set layoutX directly to position it.

      Returns:
      the layoutX property
      See Also:

    • setLayoutY

      public final void setLayoutY(double value)
      Sets the value of the layoutY property.
      Property description:
      Defines the y coordinate of the translation that is added to this Node's transform for the purpose of layout. The value should be computed as the offset required to adjust the position of the node from its current layoutBounds minY position (which might not be 0) to the desired location.

      For example, if textnode should be positioned at finalY 

      
     textnode.setLayoutY(finalY - textnode.getLayoutBounds().getMinY());

      Failure to subtract layoutBounds minY may result in misplacement of the node. The relocate(x, y) method will automatically do the correct computation and should generally be used over setting layoutY directly.

      The node's final translation will be computed as layoutY + translateY, where layoutY establishes the node's stable position and translateY optionally makes dynamic adjustments to that position.

      If the node is managed and has a Region as its parent, then the region will set layoutY according to its own layout policy. If the node is unmanaged or parented by a Group, then the application may set layoutY directly to position it.

      Parameters:
      value - the value for the layoutY property
      See Also:

    • getLayoutY

      public final double getLayoutY()
      Gets the value of the layoutY property.
      Property description:
      Defines the y coordinate of the translation that is added to this Node's transform for the purpose of layout. The value should be computed as the offset required to adjust the position of the node from its current layoutBounds minY position (which might not be 0) to the desired location.

      For example, if textnode should be positioned at finalY 

      
     textnode.setLayoutY(finalY - textnode.getLayoutBounds().getMinY());

      Failure to subtract layoutBounds minY may result in misplacement of the node. The relocate(x, y) method will automatically do the correct computation and should generally be used over setting layoutY directly.

      The node's final translation will be computed as layoutY + translateY, where layoutY establishes the node's stable position and translateY optionally makes dynamic adjustments to that position.

      If the node is managed and has a Region as its parent, then the region will set layoutY according to its own layout policy. If the node is unmanaged or parented by a Group, then the application may set layoutY directly to position it.

      Returns:
      the value of the layoutY property
      See Also:

    • layoutYProperty

      public final DoubleProperty layoutYProperty()
      Defines the y coordinate of the translation that is added to this Node's transform for the purpose of layout. The value should be computed as the offset required to adjust the position of the node from its current layoutBounds minY position (which might not be 0) to the desired location.

      For example, if textnode should be positioned at finalY 

      
     textnode.setLayoutY(finalY - textnode.getLayoutBounds().getMinY());

      Failure to subtract layoutBounds minY may result in misplacement of the node. The relocate(x, y) method will automatically do the correct computation and should generally be used over setting layoutY directly.

      The node's final translation will be computed as layoutY + translateY, where layoutY establishes the node's stable position and translateY optionally makes dynamic adjustments to that position.

      If the node is managed and has a Region as its parent, then the region will set layoutY according to its own layout policy. If the node is unmanaged or parented by a Group, then the application may set layoutY directly to position it.

      Returns:
      the layoutY property
      See Also:

    • relocate

      public void relocate(double x, double y)
      Sets the node's layoutX and layoutY translation properties in order to relocate this node to the x,y location in the parent.

      This method does not alter translateX or translateY, which if also set will be added to layoutX and layoutY, adjusting the final location by corresponding amounts.

      Parameters:
      x - the target x coordinate location
      y - the target y coordinate location

    • isResizable

      public boolean isResizable()
      Indicates whether this node is a type which can be resized by its parent. If this method returns true, then the parent will resize the node (ideally within its size range) by calling node.resize(width,height) during the layout pass. All Regions, Controls, and WebView are resizable classes which depend on their parents resizing them during layout once all sizing and CSS styling information has been applied.

      If this method returns false, then the parent cannot resize it during layout (resize() is a no-op) and it should return its layoutBounds for minimum, preferred, and maximum sizes. Group, Text, and all Shapes are not resizable and hence depend on the application to establish their sizing by setting appropriate properties (e.g. width/height for Rectangle, text on Text, and so on). Non-resizable nodes may still be relocated during layout.

      Returns:
      whether or not this node type can be resized by its parent during layout
      See Also:

    • getContentBias

      public Orientation getContentBias()
      Returns the orientation of a node's resizing bias for layout purposes. If the node type has no bias, returns null. If the node is resizable and it's height depends on its width, returns HORIZONTAL, else if its width depends on its height, returns VERTICAL.

      Resizable subclasses should override this method to return an appropriate value.

      Returns:
      orientation of width/height dependency or null if there is none
      See Also:

    • minWidth

      public double minWidth(double height)
      Returns the node's minimum width for use in layout calculations. If the node is resizable, its parent should not resize its width any smaller than this value. If the node is not resizable, returns its layoutBounds width.

      Layout code which calls this method should first check the content-bias of the node. If the node has a vertical content-bias, then callers should pass in a height value that the minimum width should be based on. If the node has either a horizontal or null content-bias, then the caller should pass in -1.

      Node subclasses with a vertical content-bias should honor the height parameter whether -1 or a positive value. All other subclasses may ignore the height parameter (which will likely be -1).

      If Node's maxWidth(double) is lower than this number, minWidth takes precedence. This means the Node should never be resized below minWidth.

      Parameters:
      height - the height that should be used if minimum width depends on it
      Returns:
      the minimum width that the node should be resized to during layout. The result will never be NaN, nor will it ever be negative.
      See Also:

    • minHeight

      public double minHeight(double width)
      Returns the node's minimum height for use in layout calculations. If the node is resizable, its parent should not resize its height any smaller than this value. If the node is not resizable, returns its layoutBounds height.

      Layout code which calls this method should first check the content-bias of the node. If the node has a horizontal content-bias, then callers should pass in a width value that the minimum height should be based on. If the node has either a vertical or null content-bias, then the caller should pass in -1.

      Node subclasses with a horizontal content-bias should honor the width parameter whether -1 or a positive value. All other subclasses may ignore the width parameter (which will likely be -1).

      If Node's maxHeight(double) is lower than this number, minHeight takes precedence. This means the Node should never be resized below minHeight.

      Parameters:
      width - the width that should be used if minimum height depends on it
      Returns:
      the minimum height that the node should be resized to during layout The result will never be NaN, nor will it ever be negative.
      See Also:

    • prefWidth

      public double prefWidth(double height)
      Returns the node's preferred width for use in layout calculations. If the node is resizable, its parent should treat this value as the node's ideal width within its range. If the node is not resizable, just returns its layoutBounds width, which should be treated as the rigid width of the node.

      Layout code which calls this method should first check the content-bias of the node. If the node has a vertical content-bias, then callers should pass in a height value that the preferred width should be based on. If the node has either a horizontal or null content-bias, then the caller should pass in -1.

      Node subclasses with a vertical content-bias should honor the height parameter whether -1 or a positive value. All other subclasses may ignore the height parameter (which will likely be -1).

      Parameters:
      height - the height that should be used if preferred width depends on it
      Returns:
      the preferred width that the node should be resized to during layout The result will never be NaN, nor will it ever be negative.
      See Also:

    • prefHeight

      public double prefHeight(double width)
      Returns the node's preferred height for use in layout calculations. If the node is resizable, its parent should treat this value as the node's ideal height within its range. If the node is not resizable, just returns its layoutBounds height, which should be treated as the rigid height of the node.

      Layout code which calls this method should first check the content-bias of the node. If the node has a horizontal content-bias, then callers should pass in a width value that the preferred height should be based on. If the node has either a vertical or null content-bias, then the caller should pass in -1.

      Node subclasses with a horizontal content-bias should honor the height parameter whether -1 or a positive value. All other subclasses may ignore the height parameter (which will likely be -1).

      Parameters:
      width - the width that should be used if preferred height depends on it
      Returns:
      the preferred height that the node should be resized to during layout The result will never be NaN, nor will it ever be negative.
      See Also:

    • maxWidth

      public double maxWidth(double height)
      Returns the node's maximum width for use in layout calculations. If the node is resizable, its parent should not resize its width any larger than this value. A value of Double.MAX_VALUE indicates the parent may expand the node's width beyond its preferred without limits.

      If the node is not resizable, returns its layoutBounds width.

      Layout code which calls this method should first check the content-bias of the node. If the node has a vertical content-bias, then callers should pass in a height value that the maximum width should be based on. If the node has either a horizontal or null content-bias, then the caller should pass in -1.

      Node subclasses with a vertical content-bias should honor the height parameter whether -1 or a positive value. All other subclasses may ignore the height parameter (which will likely be -1).

      If Node's minWidth(double) is greater, it should take precedence over the maxWidth. This means the Node should never be resized below minWidth.

      Parameters:
      height - the height that should be used if maximum width depends on it
      Returns:
      the maximum width that the node should be resized to during layout The result will never be NaN, nor will it ever be negative.
      See Also:

    • maxHeight

      public double maxHeight(double width)
      Returns the node's maximum height for use in layout calculations. If the node is resizable, its parent should not resize its height any larger than this value. A value of Double.MAX_VALUE indicates the parent may expand the node's height beyond its preferred without limits.

      If the node is not resizable, returns its layoutBounds height.

      Layout code which calls this method should first check the content-bias of the node. If the node has a horizontal content-bias, then callers should pass in a width value that the maximum height should be based on. If the node has either a vertical or null content-bias, then the caller should pass in -1.

      Node subclasses with a horizontal content-bias should honor the width parameter whether -1 or a positive value. All other subclasses may ignore the width parameter (which will likely be -1).

      If Node's minHeight(double) is greater, it should take precedence over the maxHeight. This means the Node should never be resized below minHeight.

      Parameters:
      width - the width that should be used if maximum height depends on it
      Returns:
      the maximum height that the node should be resized to during layout The result will never be NaN, nor will it ever be negative.
      See Also:

    • resize

      public void resize(double width, double height)
      If the node is resizable, will set its layout bounds to the specified width and height. If the node is not resizable, this method is a no-op.

      This method should generally only be called by parent nodes from their layoutChildren() methods. All Parent classes will automatically resize resizable children, so resizing done directly by the application will be overridden by the node's parent, unless the child is unmanaged.

      Parents are responsible for ensuring the width and height values fall within the resizable node's preferred range. The autosize() method may be used if the parent just needs to resize the node to its preferred size.

      Parameters:
      width - the target layout bounds width
      height - the target layout bounds height
      See Also:

    • autosize

      public final void autosize()
      If the node is resizable, will set its layout bounds to its current preferred width and height. If the node is not resizable, this method is a no-op.

      This method automatically queries the node's content-bias and if it's horizontal, will pass in the node's preferred width to get the preferred height; if vertical, will pass in the node's preferred height to get the width, and if null, will compute the preferred width/height independently.

      See Also:

    • resizeRelocate

      public void resizeRelocate(double x, double y, double width, double height)
      If the node is resizable, will set its layout bounds to the specified width and height. If the node is not resizable, the resize step is skipped.

      Once the node has been resized (if resizable) then sets the node's layoutX and layoutY translation properties in order to relocate it to x,y in the parent's coordinate space.

      This method should generally only be called by parent nodes from their layoutChildren() methods. All Parent classes will automatically resize resizable children, so resizing done directly by the application will be overridden by the node's parent, unless the child is unmanaged.

      Parents are responsible for ensuring the width and height values fall within the resizable node's preferred range. The autosize() and relocate() methods may be used if the parent just needs to resize the node to its preferred size and reposition it.

      Parameters:
      x - the target x coordinate location
      y - the target y coordinate location
      width - the target layout bounds width
      height - the target layout bounds height
      See Also:

    • getBaselineOffset

      public double getBaselineOffset()
      The 'alphabetic' (or 'roman') baseline offset from the node's layoutBounds.minY location that should be used when this node is being vertically aligned by baseline with other nodes. By default this returns BASELINE_OFFSET_SAME_AS_HEIGHT for resizable Nodes and layoutBounds height for non-resizable. Subclasses which contain text should override this method to return their actual text baseline offset.
      Returns:
      offset of text baseline from layoutBounds.minY for non-resizable Nodes or BASELINE_OFFSET_SAME_AS_HEIGHT otherwise

    • computeAreaInScreen

      public double computeAreaInScreen()
      Returns the area of this Node projected onto the physical screen in pixel units.
      Returns:
      the area of this Node projected onto the physical screen
      Since:
      JavaFX 8.0

    • getBoundsInParent

      public final Bounds getBoundsInParent()
      Gets the value of the boundsInParent property.
      Property description:
      The rectangular bounds of this Node in the parent coordinate system. boundsInParent is calculated by taking the local bounds and applying the node transforms as specified in the Transformations section of the class doc.

      The resulting bounds will be conceptually in the coordinate space of the Node's parent, however, the node need not have a parent to calculate these bounds.

      Note that this method does not take the node's visibility into account; the computation is based on the geometry of this Node only.

      This property will always have a non-null value.

      Note that boundsInParent is automatically recomputed whenever the geometry of a node changes, or when any of the following the change: transforms ObservableList, any of the translate, layout or scale variables, or the rotate variable. For this reason, it is an error to bind any of these values in a node to an expression that depends upon this variable. For example, the x or y variables of a shape, or translateX, translateY should never be bound to boundsInParent for the purpose of positioning the node.

      See also the Bounding Rectangles section.

      Returns:
      the value of the boundsInParent property
      See Also:

    • boundsInParentProperty

      public final ReadOnlyObjectProperty<Bounds> boundsInParentProperty()
      The rectangular bounds of this Node in the parent coordinate system. boundsInParent is calculated by taking the local bounds and applying the node transforms as specified in the Transformations section of the class doc.

      The resulting bounds will be conceptually in the coordinate space of the Node's parent, however, the node need not have a parent to calculate these bounds.

      Note that this method does not take the node's visibility into account; the computation is based on the geometry of this Node only.

      This property will always have a non-null value.

      Note that boundsInParent is automatically recomputed whenever the geometry of a node changes, or when any of the following the change: transforms ObservableList, any of the translate, layout or scale variables, or the rotate variable. For this reason, it is an error to bind any of these values in a node to an expression that depends upon this variable. For example, the x or y variables of a shape, or translateX, translateY should never be bound to boundsInParent for the purpose of positioning the node.

      See also the Bounding Rectangles section.

      Returns:
      the boundsInParent property for this Node
      See Also:

    • getBoundsInLocal

      public final Bounds getBoundsInLocal()
      Gets the value of the boundsInLocal property.
      Property description:
      The rectangular bounds of this Node in the node's untransformed local coordinate space. For nodes that extend Shape, the local bounds will also include space required for a non-zero stroke that may fall outside the shape's geometry that is defined by position and size attributes. The local bounds will also include any clipping set with clip as well as effects set with effect.

      Note that this method does not take the node's visibility into account; the computation is based on the geometry of this Node only.

      This property will always have a non-null value.

      Note that boundsInLocal is automatically recomputed whenever the geometry of a node changes. For this reason, it is an error to bind any of these values in a node to an expression that depends upon this variable. For example, the x or y variables of a shape should never be bound to boundsInLocal for the purpose of positioning the node.

      Returns:
      the value of the boundsInLocal property
      See Also:

    • boundsInLocalProperty

      public final ReadOnlyObjectProperty<Bounds> boundsInLocalProperty()
      The rectangular bounds of this Node in the node's untransformed local coordinate space. For nodes that extend Shape, the local bounds will also include space required for a non-zero stroke that may fall outside the shape's geometry that is defined by position and size attributes. The local bounds will also include any clipping set with clip as well as effects set with effect.

      Note that this method does not take the node's visibility into account; the computation is based on the geometry of this Node only.

      This property will always have a non-null value.

      Note that boundsInLocal is automatically recomputed whenever the geometry of a node changes. For this reason, it is an error to bind any of these values in a node to an expression that depends upon this variable. For example, the x or y variables of a shape should never be bound to boundsInLocal for the purpose of positioning the node.

      Returns:
      the boundsInLocal for this Node
      See Also:

    • getLayoutBounds

      public final Bounds getLayoutBounds()
      Gets the value of the layoutBounds property.
      Property description:
      The rectangular bounds that should be used for layout calculations for this node. layoutBounds may differ from the visual bounds of the node and is computed differently depending on the node type.

      If the node type is resizable (Region, Control, or WebView) then the layoutBounds will always be 0,0 width x height. If the node type is not resizable (Shape, Text, or Group), then the layoutBounds are computed based on the node's geometric properties and does not include the node's clip, effect, or transforms. See individual class documentation for details.

      Note that the layoutX, layoutY, translateX, and translateY variables are not included in the layoutBounds. This is important because layout code must first determine the current size and location of the node (using layoutBounds) and then set layoutX and layoutY to adjust the translation of the node so that it will have the desired layout position.

      Because the computation of layoutBounds is often tied to a node's geometric variables, it is an error to bind any such variables to an expression that depends upon layoutBounds. For example, the x or y variables of a shape should never be bound to layoutBounds for the purpose of positioning the node.

      Note that for 3D shapes, the layout bounds is actually a rectangular box with X, Y, and Z values, although only X and Y are used in layout calculations.

      The layoutBounds will never be null.

      Returns:
      the value of the layoutBounds property
      See Also:

    • layoutBoundsProperty

      public final ReadOnlyObjectProperty<Bounds> layoutBoundsProperty()
      The rectangular bounds that should be used for layout calculations for this node. layoutBounds may differ from the visual bounds of the node and is computed differently depending on the node type.

      If the node type is resizable (Region, Control, or WebView) then the layoutBounds will always be 0,0 width x height. If the node type is not resizable (Shape, Text, or Group), then the layoutBounds are computed based on the node's geometric properties and does not include the node's clip, effect, or transforms. See individual class documentation for details.

      Note that the layoutX, layoutY, translateX, and translateY variables are not included in the layoutBounds. This is important because layout code must first determine the current size and location of the node (using layoutBounds) and then set layoutX and layoutY to adjust the translation of the node so that it will have the desired layout position.

      Because the computation of layoutBounds is often tied to a node's geometric variables, it is an error to bind any such variables to an expression that depends upon layoutBounds. For example, the x or y variables of a shape should never be bound to layoutBounds for the purpose of positioning the node.

      Note that for 3D shapes, the layout bounds is actually a rectangular box with X, Y, and Z values, although only X and Y are used in layout calculations.

      The layoutBounds will never be null.

      Returns:
      the layoutBounds property
      See Also:

    • contains

      public boolean contains(double localX, double localY)
      Returns true if the given point (specified in the local coordinate space of this Node) is contained within the shape of this Node. Note that this method does not take visibility into account; the test is based on the geometry of this Node only.
      Parameters:
      localX - the x coordinate of the point in Node's space
      localY - the y coordinate of the point in Node's space
      Returns:
      the result of contains for this Node

    • contains

      public boolean contains(Point2D localPoint)
      Returns true if the given point (specified in the local coordinate space of this Node) is contained within the shape of this Node. Note that this method does not take visibility into account; the test is based on the geometry of this Node only.
      Parameters:
      localPoint - the 2D point in Node's space
      Returns:
      the result of contains for this Node

    • intersects

      public boolean intersects(double localX, double localY, double localWidth, double localHeight)
      Returns true if the given rectangle (specified in the local coordinate space of this Node) intersects the shape of this Node. Note that this method does not take visibility into account; the test is based on the geometry of this Node only. The default behavior of this function is simply to check if the given coordinates intersect with the local bounds.
      Parameters:
      localX - the x coordinate of a rectangle in Node's space
      localY - the y coordinate of a rectangle in Node's space
      localWidth - the width of a rectangle in Node's space
      localHeight - the height of a rectangle in Node's space
      Returns:
      the result of intersects for this Node

    • intersects

      public boolean intersects(Bounds localBounds)
      Returns true if the given bounds (specified in the local coordinate space of this Node) intersects the shape of this Node. Note that this method does not take visibility into account; the test is based on the geometry of this Node only. The default behavior of this function is simply to check if the given coordinates intersect with the local bounds.
      Parameters:
      localBounds - the bounds
      Returns:
      the result of intersects for this Node

    • screenToLocal

      public Point2D screenToLocal(double screenX, double screenY)
      Transforms a point from the coordinate space of the Screen into the local coordinate space of this Node.
      Parameters:
      screenX - x coordinate of a point on a Screen
      screenY - y coordinate of a point on a Screen
      Returns:
      local Node's coordinates of the point or null if Node is not in a Window. Null is also returned if the transformation from local to Scene is not invertible.
      Since:
      JavaFX 8.0

    • screenToLocal

      public Point2D screenToLocal(Point2D screenPoint)
      Transforms a point from the coordinate space of the Screen into the local coordinate space of this Node.
      Parameters:
      screenPoint - a point on a Screen
      Returns:
      local Node's coordinates of the point or null if Node is not in a Window. Null is also returned if the transformation from local to Scene is not invertible.
      Since:
      JavaFX 8.0

    • screenToLocal

      public Bounds screenToLocal(Bounds screenBounds)
      Transforms a rectangle from the coordinate space of the Screen into the local coordinate space of this Node. Returns reasonable result only in 2D space.
      Parameters:
      screenBounds - bounds on a Screen
      Returns:
      bounds in the local Node'space or null if Node is not in a Window. Null is also returned if the transformation from local to Scene is not invertible.
      Since:
      JavaFX 8.0

    • sceneToLocal

      public Point2D sceneToLocal(double x, double y, boolean rootScene)
      Transforms a point from the coordinate space of the scene into the local coordinate space of this Node. If the Node does not have any SubScene or rootScene is set to true, the arguments are in Scene coordinates of the Node returned by getScene(). Otherwise, the subscene coordinates are used, which is equivalent to calling sceneToLocal(double, double).
      Parameters:
      x - the x coordinate
      y - the y coordinate
      rootScene - whether Scene coordinates should be used even if the Node is in a SubScene
      Returns:
      local coordinates of the point
      Since:
      JavaFX 8u40

    • sceneToLocal

      public Point2D sceneToLocal(Point2D point, boolean rootScene)
      Transforms a point from the coordinate space of the scene into the local coordinate space of this Node. If the Node does not have any SubScene or rootScene is set to true, the arguments are in Scene coordinates of the Node returned by getScene(). Otherwise, the subscene coordinates are used, which is equivalent to calling sceneToLocal(javafx.geometry.Point2D).
      Parameters:
      point - the point
      rootScene - whether Scene coordinates should be used even if the Node is in a SubScene
      Returns:
      local coordinates of the point
      Since:
      JavaFX 8u40

    • sceneToLocal

      public Bounds sceneToLocal(Bounds bounds, boolean rootScene)
      Transforms a bounds from the coordinate space of the scene into the local coordinate space of this Node. If the Node does not have any SubScene or rootScene is set to true, the arguments are in Scene coordinates of the Node returned by getScene(). Otherwise, the subscene coordinates are used, which is equivalent to calling sceneToLocal(javafx.geometry.Bounds).

      Since 3D bounds cannot be converted with rootScene set to true, trying to convert 3D bounds will yield null.

      Parameters:
      bounds - the bounds
      rootScene - whether Scene coordinates should be used even if the Node is in a SubScene
      Returns:
      local coordinates of the bounds
      Since:
      JavaFX 8u40

    • sceneToLocal

      public Point2D sceneToLocal(double sceneX, double sceneY)
      Transforms a point from the coordinate space of the scene into the local coordinate space of this Node. Note that if this node is in a SubScene, the arguments should be in the subscene coordinates, not that of Scene.
      Parameters:
      sceneX - x coordinate of a point on a Scene
      sceneY - y coordinate of a point on a Scene
      Returns:
      local Node's coordinates of the point or null if Node is not in a Window. Null is also returned if the transformation from local to Scene is not invertible.

    • sceneToLocal

      public Point2D sceneToLocal(Point2D scenePoint)
      Transforms a point from the coordinate space of the scene into the local coordinate space of this Node. Note that if this node is in a SubScene, the arguments should be in the subscene coordinates, not that of Scene.
      Parameters:
      scenePoint - a point on a Scene
      Returns:
      local Node's coordinates of the point or null if Node is not in a Window. Null is also returned if the transformation from local to Scene is not invertible.

    • sceneToLocal

      public Point3D sceneToLocal(Point3D scenePoint)
      Transforms a point from the coordinate space of the scene into the local coordinate space of this Node. Note that if this node is in a SubScene, the arguments should be in the subscene coordinates, not that of Scene.
      Parameters:
      scenePoint - a point on a Scene
      Returns:
      local Node's coordinates of the point or null if Node is not in a Window. Null is also returned if the transformation from local to Scene is not invertible.
      Since:
      JavaFX 8.0

    • sceneToLocal

      public Point3D sceneToLocal(double sceneX, double sceneY, double sceneZ)
      Transforms a point from the coordinate space of the scene into the local coordinate space of this Node. Note that if this node is in a SubScene, the arguments should be in the subscene coordinates, not that of Scene.
      Parameters:
      sceneX - x coordinate of a point on a Scene
      sceneY - y coordinate of a point on a Scene
      sceneZ - z coordinate of a point on a Scene
      Returns:
      local Node's coordinates of the point or null if Node is not in a Window. Null is also returned if the transformation from local to Scene is not invertible.
      Since:
      JavaFX 8.0

    • sceneToLocal

      public Bounds sceneToLocal(Bounds sceneBounds)
      Transforms a rectangle from the coordinate space of the scene into the local coordinate space of this Node. Note that if this node is in a SubScene, the arguments should be in the subscene coordinates, not that of Scene.
      Parameters:
      sceneBounds - bounds on a Scene
      Returns:
      bounds in the local Node'space or null if Node is not in a Window. Null is also returned if the transformation from local to Scene is not invertible.

    • localToScreen

      public Point2D localToScreen(double localX, double localY)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its Screen.
      Parameters:
      localX - x coordinate of a point in Node's space
      localY - y coordinate of a point in Node's space
      Returns:
      screen coordinates of the point or null if Node is not in a Window
      Since:
      JavaFX 8.0

    • localToScreen

      public Point2D localToScreen(Point2D localPoint)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its Screen.
      Parameters:
      localPoint - a point in Node's space
      Returns:
      screen coordinates of the point or null if Node is not in a Window
      Since:
      JavaFX 8.0

    • localToScreen

      public Point2D localToScreen(double localX, double localY, double localZ)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its Screen.
      Parameters:
      localX - x coordinate of a point in Node's space
      localY - y coordinate of a point in Node's space
      localZ - z coordinate of a point in Node's space
      Returns:
      screen coordinates of the point or null if Node is not in a Window
      Since:
      JavaFX 8.0

    • localToScreen

      public Point2D localToScreen(Point3D localPoint)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its Screen.
      Parameters:
      localPoint - a point in Node's space
      Returns:
      screen coordinates of the point or null if Node is not in a Window
      Since:
      JavaFX 8.0

    • localToScreen

      public Bounds localToScreen(Bounds localBounds)
      Transforms a bounds from the local coordinate space of this Node into the coordinate space of its Screen.
      Parameters:
      localBounds - bounds in Node's space
      Returns:
      the bounds in screen coordinates or null if Node is not in a Window
      Since:
      JavaFX 8.0

    • localToScene

      public Point2D localToScene(double localX, double localY)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its scene. Note that if this node is in a SubScene, the result is in the subscene coordinates, not that of Scene.
      Parameters:
      localX - x coordinate of a point in Node's space
      localY - y coordinate of a point in Node's space
      Returns:
      scene coordinates of the point or null if Node is not in a Window

    • localToScene

      public Point2D localToScene(Point2D localPoint)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its scene. Note that if this node is in a SubScene, the result is in the subscene coordinates, not that of Scene.
      Parameters:
      localPoint - a point in Node's space
      Returns:
      scene coordinates of the point or null if Node is not in a Window

    • localToScene

      public Point3D localToScene(Point3D localPoint)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its scene. Note that if this node is in a SubScene, the result is in the subscene coordinates, not that of Scene.
      Parameters:
      localPoint - a 3D point in Node's space
      Returns:
      the transformed 3D point in Scene's space
      Since:
      JavaFX 8.0
      See Also:

    • localToScene

      public Point3D localToScene(double x, double y, double z)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its scene. Note that if this node is in a SubScene, the result is in the subscene coordinates, not that of Scene.
      Parameters:
      x - the x coordinate of a point in Node's space
      y - the y coordinate of a point in Node's space
      z - the z coordinate of a point in Node's space
      Returns:
      the transformed 3D point in Scene's space
      Since:
      JavaFX 8.0
      See Also:

    • localToScene

      public Point3D localToScene(Point3D localPoint, boolean rootScene)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its scene. If the Node does not have any SubScene or rootScene is set to true, the result point is in Scene coordinates of the Node returned by getScene(). Otherwise, the subscene coordinates are used, which is equivalent to calling localToScene(javafx.geometry.Point3D).
      Parameters:
      localPoint - the point in local coordinates
      rootScene - whether Scene coordinates should be used even if the Node is in a SubScene
      Returns:
      transformed point
      Since:
      JavaFX 8u40
      See Also:

    • localToScene

      public Point3D localToScene(double x, double y, double z, boolean rootScene)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its scene. If the Node does not have any SubScene or rootScene is set to true, the result point is in Scene coordinates of the Node returned by getScene(). Otherwise, the subscene coordinates are used, which is equivalent to calling localToScene(double, double, double).
      Parameters:
      x - the x coordinate of the point in local coordinates
      y - the y coordinate of the point in local coordinates
      z - the z coordinate of the point in local coordinates
      rootScene - whether Scene coordinates should be used even if the Node is in a SubScene
      Returns:
      transformed point
      Since:
      JavaFX 8u40
      See Also:

    • localToScene

      public Point2D localToScene(Point2D localPoint, boolean rootScene)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its scene. If the Node does not have any SubScene or rootScene is set to true, the result point is in Scene coordinates of the Node returned by getScene(). Otherwise, the subscene coordinates are used, which is equivalent to calling localToScene(javafx.geometry.Point2D).
      Parameters:
      localPoint - the point in local coordinates
      rootScene - whether Scene coordinates should be used even if the Node is in a SubScene
      Returns:
      transformed point
      Since:
      JavaFX 8u40
      See Also:

    • localToScene

      public Point2D localToScene(double x, double y, boolean rootScene)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its scene. If the Node does not have any SubScene or rootScene is set to true, the result point is in Scene coordinates of the Node returned by getScene(). Otherwise, the subscene coordinates are used, which is equivalent to calling localToScene(double, double).
      Parameters:
      x - the x coordinate of the point in local coordinates
      y - the y coordinate of the point in local coordinates
      rootScene - whether Scene coordinates should be used even if the Node is in a SubScene
      Returns:
      transformed point
      Since:
      JavaFX 8u40
      See Also:

    • localToScene

      public Bounds localToScene(Bounds localBounds, boolean rootScene)
      Transforms a bounds from the local coordinate space of this Node into the coordinate space of its scene. If the Node does not have any SubScene or rootScene is set to true, the result bounds are in Scene coordinates of the Node returned by getScene(). Otherwise, the subscene coordinates are used, which is equivalent to calling localToScene(javafx.geometry.Bounds).
      Parameters:
      localBounds - the bounds in local coordinates
      rootScene - whether Scene coordinates should be used even if the Node is in a SubScene
      Returns:
      transformed bounds
      Since:
      JavaFX 8u40
      See Also:

    • localToScene

      public Bounds localToScene(Bounds localBounds)
      Transforms a bounds from the local coordinate space of this Node into the coordinate space of its scene. Note that if this node is in a SubScene, the result is in the subscene coordinates, not that of Scene.
      Parameters:
      localBounds - bounds in Node's space
      Returns:
      the bounds in the scene coordinates or null if Node is not in a Window
      See Also:

    • parentToLocal

      public Point2D parentToLocal(double parentX, double parentY)
      Transforms a point from the coordinate space of the parent into the local coordinate space of this Node.
      Parameters:
      parentX - the x coordinate in Parent's space
      parentY - the y coordinate in Parent's space
      Returns:
      the transformed 2D point in Node's space

    • parentToLocal

      public Point2D parentToLocal(Point2D parentPoint)
      Transforms a point from the coordinate space of the parent into the local coordinate space of this Node.
      Parameters:
      parentPoint - the 2D point in Parent's space
      Returns:
      the transformed 2D point in Node's space

    • parentToLocal

      public Point3D parentToLocal(Point3D parentPoint)
      Transforms a point from the coordinate space of the parent into the local coordinate space of this Node.
      Parameters:
      parentPoint - parentPoint the 3D point in Parent's space
      Returns:
      the transformed 3D point in Node's space
      Since:
      JavaFX 8.0

    • parentToLocal

      public Point3D parentToLocal(double parentX, double parentY, double parentZ)
      Transforms a point from the coordinate space of the parent into the local coordinate space of this Node.
      Parameters:
      parentX - the x coordinate in Parent's space
      parentY - the y coordinate in Parent's space
      parentZ - the z coordinate in Parent's space
      Returns:
      the transformed 3D point in Node's space
      Since:
      JavaFX 8.0

    • parentToLocal

      public Bounds parentToLocal(Bounds parentBounds)
      Transforms a rectangle from the coordinate space of the parent into the local coordinate space of this Node.
      Parameters:
      parentBounds - the bounds in Parent's space
      Returns:
      the transformed bounds in Node's space

    • localToParent

      public Point2D localToParent(double localX, double localY)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its parent.
      Parameters:
      localX - the x coordinate of the point in Node's space
      localY - the y coordinate of the point in Node's space
      Returns:
      the transformed 2D point in Parent's space

    • localToParent

      public Point2D localToParent(Point2D localPoint)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its parent.
      Parameters:
      localPoint - the 2D point in Node's space
      Returns:
      the transformed 2D point in Parent's space

    • localToParent

      public Point3D localToParent(Point3D localPoint)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its parent.
      Parameters:
      localPoint - the 3D point in Node's space
      Returns:
      the transformed 3D point in Parent's space
      Since:
      JavaFX 8.0

    • localToParent

      public Point3D localToParent(double x, double y, double z)
      Transforms a point from the local coordinate space of this Node into the coordinate space of its parent.
      Parameters:
      x - the x coordinate of the point in Node's space
      y - the y coordinate of the point in Node's space
      z - the z coordinate of the point in Node's space
      Returns:
      the transformed 3D point in Parent's space
      Since:
      JavaFX 8.0

    • localToParent

      public Bounds localToParent(Bounds localBounds)
      Transforms a bounds from the local coordinate space of this Node into the coordinate space of its parent.
      Parameters:
      localBounds - the bounds in Node's space
      Returns:
      the transformed bounds in Parent's space

    • viewOrderProperty

      public final DoubleProperty viewOrderProperty()
      Defines the rendering and picking order of this Node within its parent.

      This property is used to alter the rendering and picking order of a node within its parent without reordering the parent's children list. For example, this can be used as a more efficient way to implement transparency sorting. To do this, an application can assign the viewOrder value of each node to the computed distance between that node and the viewer.

      The parent will traverse its children in decreasing viewOrder order. This means that a child with a lower viewOrder will be in front of a child with a higher viewOrder. If two children have the same viewOrder, the parent will traverse them in the order they appear in the parent's children list.

      However, viewOrder does not alter the layout and focus traversal order of this Node within its parent. A parent always traverses its children list in order when doing layout or focus traversal.

      Default value:
      0.0
      Returns:
      the view order for this Node
      Since:
      9
      See Also:

    • setViewOrder

      public final void setViewOrder(double value)
      Sets the value of the viewOrder property.
      Property description:
      Defines the rendering and picking order of this Node within its parent.

      This property is used to alter the rendering and picking order of a node within its parent without reordering the parent's children list. For example, this can be used as a more efficient way to implement transparency sorting. To do this, an application can assign the viewOrder value of each node to the computed distance between that node and the viewer.

      The parent will traverse its children in decreasing viewOrder order. This means that a child with a lower viewOrder will be in front of a child with a higher viewOrder. If two children have the same viewOrder, the parent will traverse them in the order they appear in the parent's children list.

      However, viewOrder does not alter the layout and focus traversal order of this Node within its parent. A parent always traverses its children list in order when doing layout or focus traversal.

      Default value:
      0.0
      Parameters:
      value - the value for the viewOrder property
      Since:
      9
      See Also:

    • getViewOrder

      public final double getViewOrder()
      Gets the value of the viewOrder property.
      Property description:
      Defines the rendering and picking order of this Node within its parent.

      This property is used to alter the rendering and picking order of a node within its parent without reordering the parent's children list. For example, this can be used as a more efficient way to implement transparency sorting. To do this, an application can assign the viewOrder value of each node to the computed distance between that node and the viewer.

      The parent will traverse its children in decreasing viewOrder order. This means that a child with a lower viewOrder will be in front of a child with a higher viewOrder. If two children have the same viewOrder, the parent will traverse them in the order they appear in the parent's children list.

      However, viewOrder does not alter the layout and focus traversal order of this Node within its parent. A parent always traverses its children list in order when doing layout or focus traversal.

      Default value:
      0.0
      Returns:
      the value of the viewOrder property
      Since:
      9
      See Also:

    • getTransforms

      public final ObservableList<Transform> getTransforms()
      The ObservableList of custom Transforms to be applied to this Node. These transforms are applied before the predefined transforms.

      See also the Transformations section.

      Default value:
      empty
      Returns:
      the transforms for this Node

    • setTranslateX

      public final void setTranslateX(double value)
      Sets the value of the translateX property.
      Property description:
      Defines the x coordinate of the translation that is added to this Node's transform.

      The node's final translation will be computed as layoutX + translateX, where layoutX establishes the node's stable position and translateX optionally makes dynamic adjustments to that position.

      This variable can be used to alter the location of a node without disturbing its layoutBounds, which makes it useful for animating a node's location.

      Default value:
      0
      Parameters:
      value - the value for the translateX property
      See Also:

    • getTranslateX

      public final double getTranslateX()
      Gets the value of the translateX property.
      Property description:
      Defines the x coordinate of the translation that is added to this Node's transform.

      The node's final translation will be computed as layoutX + translateX, where layoutX establishes the node's stable position and translateX optionally makes dynamic adjustments to that position.

      This variable can be used to alter the location of a node without disturbing its layoutBounds, which makes it useful for animating a node's location.

      Default value:
      0
      Returns:
      the value of the translateX property
      See Also:

    • translateXProperty

      public final DoubleProperty translateXProperty()
      Defines the x coordinate of the translation that is added to this Node's transform.

      The node's final translation will be computed as layoutX + translateX, where layoutX establishes the node's stable position and translateX optionally makes dynamic adjustments to that position.

      This variable can be used to alter the location of a node without disturbing its layoutBounds, which makes it useful for animating a node's location.

      Default value:
      0
      Returns:
      the translateX for this Node
      See Also:

    • setTranslateY

      public final void setTranslateY(double value)
      Sets the value of the translateY property.
      Property description:
      Defines the y coordinate of the translation that is added to this Node's transform.

      The node's final translation will be computed as layoutY + translateY, where layoutY establishes the node's stable position and translateY optionally makes dynamic adjustments to that position.

      This variable can be used to alter the location of a node without disturbing its layoutBounds, which makes it useful for animating a node's location.

      Default value:
      0
      Parameters:
      value - the value for the translateY property
      See Also:

    • getTranslateY

      public final double getTranslateY()
      Gets the value of the translateY property.
      Property description:
      Defines the y coordinate of the translation that is added to this Node's transform.

      The node's final translation will be computed as layoutY + translateY, where layoutY establishes the node's stable position and translateY optionally makes dynamic adjustments to that position.

      This variable can be used to alter the location of a node without disturbing its layoutBounds, which makes it useful for animating a node's location.

      Default value:
      0
      Returns:
      the value of the translateY property
      See Also:

    • translateYProperty

      public final DoubleProperty translateYProperty()
      Defines the y coordinate of the translation that is added to this Node's transform.

      The node's final translation will be computed as layoutY + translateY, where layoutY establishes the node's stable position and translateY optionally makes dynamic adjustments to that position.

      This variable can be used to alter the location of a node without disturbing its layoutBounds, which makes it useful for animating a node's location.

      Default value:
      0
      Returns:
      the translateY for this Node
      See Also:

    • setTranslateZ

      public final void setTranslateZ(double value)
      Sets the value of the translateZ property.
      Property description:
      Defines the Z coordinate of the translation that is added to the transformed coordinates of this Node. This value will be added to any translation defined by the transforms ObservableList and layoutZ.

      This variable can be used to alter the location of a Node without disturbing its layout bounds, which makes it useful for animating a node's location.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      0
      Parameters:
      value - the value for the translateZ property
      See Also:

    • getTranslateZ

      public final double getTranslateZ()
      Gets the value of the translateZ property.
      Property description:
      Defines the Z coordinate of the translation that is added to the transformed coordinates of this Node. This value will be added to any translation defined by the transforms ObservableList and layoutZ.

      This variable can be used to alter the location of a Node without disturbing its layout bounds, which makes it useful for animating a node's location.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      0
      Returns:
      the value of the translateZ property
      See Also:

    • translateZProperty

      public final DoubleProperty translateZProperty()
      Defines the Z coordinate of the translation that is added to the transformed coordinates of this Node. This value will be added to any translation defined by the transforms ObservableList and layoutZ.

      This variable can be used to alter the location of a Node without disturbing its layout bounds, which makes it useful for animating a node's location.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      0
      Returns:
      the translateZ for this Node
      See Also:

    • setScaleX

      public final void setScaleX(double value)
      Sets the value of the scaleX property.
      Property description:
      Defines the factor by which coordinates are scaled about the center of the object along the X axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the untransformed layoutBounds.

      Default value:
      1.0
      Parameters:
      value - the value for the scaleX property
      See Also:

    • getScaleX

      public final double getScaleX()
      Gets the value of the scaleX property.
      Property description:
      Defines the factor by which coordinates are scaled about the center of the object along the X axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the untransformed layoutBounds.

      Default value:
      1.0
      Returns:
      the value of the scaleX property
      See Also:

    • scaleXProperty

      public final DoubleProperty scaleXProperty()
      Defines the factor by which coordinates are scaled about the center of the object along the X axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the untransformed layoutBounds.

      Default value:
      1.0
      Returns:
      the scaleX for this Node
      See Also:

    • setScaleY

      public final void setScaleY(double value)
      Sets the value of the scaleY property.
      Property description:
      Defines the factor by which coordinates are scaled about the center of the object along the Y axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the untransformed layoutBounds.

      Default value:
      1.0
      Parameters:
      value - the value for the scaleY property
      See Also:

    • getScaleY

      public final double getScaleY()
      Gets the value of the scaleY property.
      Property description:
      Defines the factor by which coordinates are scaled about the center of the object along the Y axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the untransformed layoutBounds.

      Default value:
      1.0
      Returns:
      the value of the scaleY property
      See Also:

    • scaleYProperty

      public final DoubleProperty scaleYProperty()
      Defines the factor by which coordinates are scaled about the center of the object along the Y axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the untransformed layoutBounds.

      Default value:
      1.0
      Returns:
      the scaleY for this Node
      See Also:

    • setScaleZ

      public final void setScaleZ(double value)
      Sets the value of the scaleZ property.
      Property description:
      Defines the factor by which coordinates are scaled about the center of the object along the Z axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the rectangular bounds formed by taking boundsInLocal and applying all the transforms in the transforms ObservableList.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      1.0
      Parameters:
      value - the value for the scaleZ property
      See Also:

    • getScaleZ

      public final double getScaleZ()
      Gets the value of the scaleZ property.
      Property description:
      Defines the factor by which coordinates are scaled about the center of the object along the Z axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the rectangular bounds formed by taking boundsInLocal and applying all the transforms in the transforms ObservableList.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      1.0
      Returns:
      the value of the scaleZ property
      See Also:

    • scaleZProperty

      public final DoubleProperty scaleZProperty()
      Defines the factor by which coordinates are scaled about the center of the object along the Z axis of this Node. This is used to stretch or shrink the node either manually or by using an animation.

      This scale factor is not included in layoutBounds by default, which makes it ideal for scaling the entire node after all effects and transforms have been taken into account.

      The pivot point about which the scale occurs is the center of the rectangular bounds formed by taking boundsInLocal and applying all the transforms in the transforms ObservableList.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      1.0
      Returns:
      the scaleZ for this Node
      See Also:

    • setRotate

      public final void setRotate(double value)
      Sets the value of the rotate property.
      Property description:
      Defines the angle of rotation about the Node's center, measured in degrees. This is used to rotate the Node.

      This rotation factor is not included in layoutBounds by default, which makes it ideal for rotating the entire node after all effects and transforms have been taken into account.

      The pivot point about which the rotation occurs is the center of the untransformed layoutBounds.

      Note that because the pivot point is computed as the center of this Node's layout bounds, any change to the layout bounds will cause the pivot point to change, which can move the object. For a leaf node, any change to the geometry will cause the layout bounds to change. For a group node, any change to any of its children, including a change in a child's geometry, clip, effect, position, orientation, or scale, will cause the group's layout bounds to change. If this movement of the pivot point is not desired, applications should instead use the Node's transforms ObservableList, and add a Rotate transform, which has a user-specifiable pivot point.

      Default value:
      0.0
      Parameters:
      value - the value for the rotate property
      See Also:

    • getRotate

      public final double getRotate()
      Gets the value of the rotate property.
      Property description:
      Defines the angle of rotation about the Node's center, measured in degrees. This is used to rotate the Node.

      This rotation factor is not included in layoutBounds by default, which makes it ideal for rotating the entire node after all effects and transforms have been taken into account.

      The pivot point about which the rotation occurs is the center of the untransformed layoutBounds.

      Note that because the pivot point is computed as the center of this Node's layout bounds, any change to the layout bounds will cause the pivot point to change, which can move the object. For a leaf node, any change to the geometry will cause the layout bounds to change. For a group node, any change to any of its children, including a change in a child's geometry, clip, effect, position, orientation, or scale, will cause the group's layout bounds to change. If this movement of the pivot point is not desired, applications should instead use the Node's transforms ObservableList, and add a Rotate transform, which has a user-specifiable pivot point.

      Default value:
      0.0
      Returns:
      the value of the rotate property
      See Also:

    • rotateProperty

      public final DoubleProperty rotateProperty()
      Defines the angle of rotation about the Node's center, measured in degrees. This is used to rotate the Node.

      This rotation factor is not included in layoutBounds by default, which makes it ideal for rotating the entire node after all effects and transforms have been taken into account.

      The pivot point about which the rotation occurs is the center of the untransformed layoutBounds.

      Note that because the pivot point is computed as the center of this Node's layout bounds, any change to the layout bounds will cause the pivot point to change, which can move the object. For a leaf node, any change to the geometry will cause the layout bounds to change. For a group node, any change to any of its children, including a change in a child's geometry, clip, effect, position, orientation, or scale, will cause the group's layout bounds to change. If this movement of the pivot point is not desired, applications should instead use the Node's transforms ObservableList, and add a Rotate transform, which has a user-specifiable pivot point.

      Default value:
      0.0
      Returns:
      the rotate for this Node
      See Also:

    • setRotationAxis

      public final void setRotationAxis(Point3D value)
      Sets the value of the rotationAxis property.
      Property description:
      Defines the axis of rotation of this Node.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      Rotate.Z_AXIS
      Parameters:
      value - the value for the rotationAxis property
      See Also:

    • getRotationAxis

      public final Point3D getRotationAxis()
      Gets the value of the rotationAxis property.
      Property description:
      Defines the axis of rotation of this Node.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      Rotate.Z_AXIS
      Returns:
      the value of the rotationAxis property
      See Also:

    • rotationAxisProperty

      public final ObjectProperty<Point3D> rotationAxisProperty()
      Defines the axis of rotation of this Node.

      Note that this is a conditional feature. See ConditionalFeature.SCENE3D for more information.

      Default value:
      Rotate.Z_AXIS
      Returns:
      the rotationAxis for this Node
      See Also:

    • localToParentTransformProperty

      public final ReadOnlyObjectProperty<Transform> localToParentTransformProperty()
      An affine transform that holds the computed local-to-parent transform. This is the concatenation of all transforms in this node, including all of the convenience transforms.
      Returns:
      the localToParent transform for this Node
      Since:
      JavaFX 2.2
      See Also:

    • getLocalToParentTransform

      public final Transform getLocalToParentTransform()
      Gets the value of the localToParentTransform property.
      Property description:
      An affine transform that holds the computed local-to-parent transform. This is the concatenation of all transforms in this node, including all of the convenience transforms.
      Returns:
      the value of the localToParentTransform property
      Since:
      JavaFX 2.2
      See Also:

    • localToSceneTransformProperty

      public final ReadOnlyObjectProperty<Transform> localToSceneTransformProperty()
      An affine transform that holds the computed local-to-scene transform. This is the concatenation of all transforms in this node's parents and in this node, including all of the convenience transforms up to the root. If this node is in a SubScene, this property represents transforms up to the subscene, not the root scene.

      Note that when you register a listener or a binding to this property, it needs to listen for invalidation on all its parents to the root node. This means that registering a listener on this property on many nodes may negatively affect performance of transformation changes in their common parents.

      Returns:
      the localToScene transform for this Node
      Since:
      JavaFX 2.2
      See Also:

    • getLocalToSceneTransform

      public final Transform getLocalToSceneTransform()
      Gets the value of the localToSceneTransform property.
      Property description:
      An affine transform that holds the computed local-to-scene transform. This is the concatenation of all transforms in this node's parents and in this node, including all of the convenience transforms up to the root. If this node is in a SubScene, this property represents transforms up to the subscene, not the root scene.

      Note that when you register a listener or a binding to this property, it needs to listen for invalidation on all its parents to the root node. This means that registering a listener on this property on many nodes may negatively affect performance of transformation changes in their common parents.

      Returns:
      the value of the localToSceneTransform property
      Since:
      JavaFX 2.2
      See Also:

    • setNodeOrientation

      public final void setNodeOrientation(NodeOrientation orientation)
      Sets the value of the nodeOrientation property.
      Property description:
      Node orientation describes the flow of visual data within a node. In the English speaking world, visual data normally flows from left-to-right. In an Arabic or Hebrew world, visual data flows from right-to-left. This is consistent with the reading order of text in both worlds.
      Default value:
      NodeOrientation.INHERIT
      Parameters:
      orientation - the value for the nodeOrientation property
      Since:
      JavaFX 8.0
      See Also:

    • getNodeOrientation

      public final NodeOrientation getNodeOrientation()
      Gets the value of the nodeOrientation property.
      Property description:
      Node orientation describes the flow of visual data within a node. In the English speaking world, visual data normally flows from left-to-right. In an Arabic or Hebrew world, visual data flows from right-to-left. This is consistent with the reading order of text in both worlds.
      Default value:
      NodeOrientation.INHERIT
      Returns:
      the value of the nodeOrientation property
      Since:
      JavaFX 8.0
      See Also:

    • nodeOrientationProperty

      public final ObjectProperty<NodeOrientation> nodeOrientationProperty()
      Node orientation describes the flow of visual data within a node. In the English speaking world, visual data normally flows from left-to-right. In an Arabic or Hebrew world, visual data flows from right-to-left. This is consistent with the reading order of text in both worlds.
      Default value:
      NodeOrientation.INHERIT
      Returns:
      the nodeOrientation property
      Since:
      JavaFX 8.0
      See Also:

    • getEffectiveNodeOrientation

      public final NodeOrientation getEffectiveNodeOrientation()
      Gets the value of the effectiveNodeOrientation property.
      Property description:
      The effective orientation of a node resolves the inheritance of node orientation, returning either left-to-right or right-to-left.
      Returns:
      the value of the effectiveNodeOrientation property
      Since:
      JavaFX 8.0
      See Also:

    • effectiveNodeOrientationProperty

      public final ReadOnlyObjectProperty<NodeOrientation> effectiveNodeOrientationProperty()
      The effective orientation of a node resolves the inheritance of node orientation, returning either left-to-right or right-to-left.
      Returns:
      the node orientation for this Node
      Since:
      JavaFX 8.0
      See Also:

    • usesMirroring

      public boolean usesMirroring()
      Determines whether a node should be mirrored when node orientation is right-to-left.

      When a node is mirrored, the origin is automatically moved to the top right corner causing the node to layout children and draw from right to left using a mirroring transformation. Some nodes may wish to draw from right to left without using a transformation. These nodes will answer false and implement right-to-left orientation without using the automatic transformation.

      Returns:
      true if this Node should be mirrored
      Since:
      JavaFX 8.0

    • setMouseTransparent

      public final void setMouseTransparent(boolean value)
      Sets the value of the mouseTransparent property.
      Property description:
      If true, this node (together with all its children) is completely transparent to mouse events. When choosing target for mouse event, nodes with mouseTransparent set to true and their subtrees won't be taken into account.
      Parameters:
      value - the value for the mouseTransparent property
      See Also:

    • isMouseTransparent

      public final boolean isMouseTransparent()
      Gets the value of the mouseTransparent property.
      Property description:
      If true, this node (together with all its children) is completely transparent to mouse events. When choosing target for mouse event, nodes with mouseTransparent set to true and their subtrees won't be taken into account.
      Returns:
      the value of the mouseTransparent property
      See Also:

    • mouseTransparentProperty

      public final BooleanProperty mouseTransparentProperty()
      If true, this node (together with all its children) is completely transparent to mouse events. When choosing target for mouse event, nodes with mouseTransparent set to true and their subtrees won't be taken into account.
      Returns:
      is this Node (together with all its children) is completely transparent to mouse events.
      See Also:

    • setHover

      protected final void setHover(boolean value)
      Sets the value of the hover property.
      Property description:
      Whether or not this Node is being hovered over. Typically this is due to the mouse being over the node, though it could be due to a pen hovering on a graphics tablet or other form of input.

      Note that current implementation of hover relies on mouse enter and exit events to determine whether this Node is in the hover state; this means that this feature is currently supported only on systems that have a mouse. Future implementations may provide alternative means of supporting hover.

      Default value:
      false
      Parameters:
      value - the value for the hover property
      See Also:

    • isHover

      public final boolean isHover()
      Gets the value of the hover property.
      Property description:
      Whether or not this Node is being hovered over. Typically this is due to the mouse being over the node, though it could be due to a pen hovering on a graphics tablet or other form of input.

      Note that current implementation of hover relies on mouse enter and exit events to determine whether this Node is in the hover state; this means that this feature is currently supported only on systems that have a mouse. Future implementations may provide alternative means of supporting hover.

      Default value:
      false
      Returns:
      the value of the hover property
      See Also:

    • hoverProperty

      public final ReadOnlyBooleanProperty hoverProperty()
      Whether or not this Node is being hovered over. Typically this is due to the mouse being over the node, though it could be due to a pen hovering on a graphics tablet or other form of input.

      Note that current implementation of hover relies on mouse enter and exit events to determine whether this Node is in the hover state; this means that this feature is currently supported only on systems that have a mouse. Future implementations may provide alternative means of supporting hover.

      Default value:
      false
      Returns:
      the hover property
      See Also:

    • setPressed

      protected final void setPressed(boolean value)
      Sets the value of the pressed property.
      Property description:
      Whether or not the Node is pressed. Typically this is true when the primary mouse button is down, though subclasses may define other mouse button state or key state to cause the node to be "pressed".
      Default value:
      false
      Parameters:
      value - the value for the pressed property
      See Also:

    • isPressed

      public final boolean isPressed()
      Gets the value of the pressed property.
      Property description:
      Whether or not the Node is pressed. Typically this is true when the primary mouse button is down, though subclasses may define other mouse button state or key state to cause the node to be "pressed".
      Default value:
      false
      Returns:
      the value of the pressed property
      See Also:

    • pressedProperty

      public final ReadOnlyBooleanProperty pressedProperty()
      Whether or not the Node is pressed. Typically this is true when the primary mouse button is down, though subclasses may define other mouse button state or key state to cause the node to be "pressed".
      Default value:
      false
      Returns:
      the pressed property
      See Also:

    • setOnContextMenuRequested

      public final void setOnContextMenuRequested(EventHandler<? super ContextMenuEvent> value)
      Sets the value of the onContextMenuRequested property.
      Property description:
      Defines a function to be called when a context menu has been requested on this Node.
      Parameters:
      value - the value for the onContextMenuRequested property
      Since:
      JavaFX 2.1
      See Also:

    • getOnContextMenuRequested

      public final EventHandler<? super ContextMenuEvent> getOnContextMenuRequested()
      Gets the value of the onContextMenuRequested property.
      Property description:
      Defines a function to be called when a context menu has been requested on this Node.
      Returns:
      the value of the onContextMenuRequested property
      Since:
      JavaFX 2.1
      See Also:

    • onContextMenuRequestedProperty

      public final ObjectProperty<EventHandler<? super ContextMenuEvent>> onContextMenuRequestedProperty()
      Defines a function to be called when a context menu has been requested on this Node.
      Returns:
      the event handler that is called when a context menu has been requested on this Node
      Since:
      JavaFX 2.1
      See Also:

    • setOnMouseClicked

      public final void setOnMouseClicked(EventHandler<? super MouseEvent> value)
      Sets the value of the onMouseClicked property.
      Property description:
      Defines a function to be called when a mouse button has been clicked (pressed and released) on this Node.
      Parameters:
      value - the value for the onMouseClicked property
      See Also:

    • getOnMouseClicked

      public final EventHandler<? super MouseEvent> getOnMouseClicked()
      Gets the value of the onMouseClicked property.
      Property description:
      Defines a function to be called when a mouse button has been clicked (pressed and released) on this Node.
      Returns:
      the value of the onMouseClicked property
      See Also:

    • onMouseClickedProperty

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseClickedProperty()
      Defines a function to be called when a mouse button has been clicked (pressed and released) on this Node.
      Returns:
      the event handler that is called when a mouse button has been clicked (pressed and released) on this Node
      See Also:

    • setOnMouseDragged

      public final void setOnMouseDragged(EventHandler<? super MouseEvent> value)
      Sets the value of the onMouseDragged property.
      Property description:
      Defines a function to be called when a mouse button is pressed on this Node and then dragged.
      Parameters:
      value - the value for the onMouseDragged property
      See Also:

    • getOnMouseDragged

      public final EventHandler<? super MouseEvent> getOnMouseDragged()
      Gets the value of the onMouseDragged property.
      Property description:
      Defines a function to be called when a mouse button is pressed on this Node and then dragged.
      Returns:
      the value of the onMouseDragged property
      See Also:

    • onMouseDraggedProperty

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseDraggedProperty()
      Defines a function to be called when a mouse button is pressed on this Node and then dragged.
      Returns:
      the event handler that is called when a mouse button is pressed on this Node and then dragged
      See Also:

    • setOnMouseEntered

      public final void setOnMouseEntered(EventHandler<? super MouseEvent> value)
      Sets the value of the onMouseEntered property.
      Property description:
      Defines a function to be called when the mouse enters this Node.
      Parameters:
      value - the value for the onMouseEntered property
      See Also:

    • getOnMouseEntered

      public final EventHandler<? super MouseEvent> getOnMouseEntered()
      Gets the value of the onMouseEntered property.
      Property description:
      Defines a function to be called when the mouse enters this Node.
      Returns:
      the value of the onMouseEntered property
      See Also:

    • onMouseEnteredProperty

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseEnteredProperty()
      Defines a function to be called when the mouse enters this Node.
      Returns:
      the event handler that is called when a mouse enters this Node
      See Also:

    • setOnMouseExited

      public final void setOnMouseExited(EventHandler<? super MouseEvent> value)
      Sets the value of the onMouseExited property.
      Property description:
      Defines a function to be called when the mouse exits this Node.
      Parameters:
      value - the value for the onMouseExited property
      See Also:

    • getOnMouseExited

      public final EventHandler<? super MouseEvent> getOnMouseExited()
      Gets the value of the onMouseExited property.
      Property description:
      Defines a function to be called when the mouse exits this Node.
      Returns:
      the value of the onMouseExited property
      See Also:

    • onMouseExitedProperty

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseExitedProperty()
      Defines a function to be called when the mouse exits this Node.
      Returns:
      the event handler that is called when a mouse exits this Node
      See Also:

    • setOnMouseMoved

      public final void setOnMouseMoved(EventHandler<? super MouseEvent> value)
      Sets the value of the onMouseMoved property.
      Property description:
      Defines a function to be called when mouse cursor moves within this Node but no buttons have been pushed.
      Parameters:
      value - the value for the onMouseMoved property
      See Also:

    • getOnMouseMoved

      public final EventHandler<? super MouseEvent> getOnMouseMoved()
      Gets the value of the onMouseMoved property.
      Property description:
      Defines a function to be called when mouse cursor moves within this Node but no buttons have been pushed.
      Returns:
      the value of the onMouseMoved property
      See Also:

    • onMouseMovedProperty

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseMovedProperty()
      Defines a function to be called when mouse cursor moves within this Node but no buttons have been pushed.
      Returns:
      the event handler that is called when a mouse cursor moves within this Node but no buttons have been pushed
      See Also:

    • setOnMousePressed

      public final void setOnMousePressed(EventHandler<? super MouseEvent> value)
      Sets the value of the onMousePressed property.
      Property description:
      Defines a function to be called when a mouse button has been pressed on this Node.
      Parameters:
      value - the value for the onMousePressed property
      See Also:

    • getOnMousePressed

      public final EventHandler<? super MouseEvent> getOnMousePressed()
      Gets the value of the onMousePressed property.
      Property description:
      Defines a function to be called when a mouse button has been pressed on this Node.
      Returns:
      the value of the onMousePressed property
      See Also:

    • onMousePressedProperty

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMousePressedProperty()
      Defines a function to be called when a mouse button has been pressed on this Node.
      Returns:
      the event handler that is called when a mouse button has been pressed on this Node
      See Also:

    • setOnMouseReleased

      public final void setOnMouseReleased(EventHandler<? super MouseEvent> value)
      Sets the value of the onMouseReleased property.
      Property description:
      Defines a function to be called when a mouse button has been released on this Node.
      Parameters:
      value - the value for the onMouseReleased property
      See Also:

    • getOnMouseReleased

      public final EventHandler<? super MouseEvent> getOnMouseReleased()
      Gets the value of the onMouseReleased property.
      Property description:
      Defines a function to be called when a mouse button has been released on this Node.
      Returns:
      the value of the onMouseReleased property
      See Also:

    • onMouseReleasedProperty

      public final ObjectProperty<EventHandler<? super MouseEvent>> onMouseReleasedProperty()
      Defines a function to be called when a mouse button has been released on this Node.
      Returns:
      the event handler that is called when a mouse button has been released on this Node
      See Also:

    • setOnDragDetected

      public final void setOnDragDetected(EventHandler<? super MouseEvent> value)
      Sets the value of the onDragDetected property.
      Property description:
      Defines a function to be called when drag gesture has been detected. This is the right place to start drag and drop operation.
      Parameters:
      value - the value for the onDragDetected property
      See Also:

    • getOnDragDetected

      public final EventHandler<? super MouseEvent> getOnDragDetected()
      Gets the value of the onDragDetected property.
      Property description:
      Defines a function to be called when drag gesture has been detected. This is the right place to start drag and drop operation.
      Returns:
      the value of the onDragDetected property
      See Also:

    • onDragDetectedProperty

      public final ObjectProperty<EventHandler<? super MouseEvent>> onDragDetectedProperty()
      Defines a function to be called when drag gesture has been detected. This is the right place to start drag and drop operation.
      Returns:
      the event handler that is called when drag gesture has been detected
      See Also:

    • setOnMouseDragOver

      public final void setOnMouseDragOver(EventHandler<? super MouseDragEvent> value)
      Sets the value of the onMouseDragOver property.
      Property description:
      Defines a function to be called when a full press-drag-release gesture progresses within this Node.
      Parameters:
      value - the value for the onMouseDragOver property
      Since:
      JavaFX 2.1
      See Also:

    • getOnMouseDragOver

      public final EventHandler<? super MouseDragEvent> getOnMouseDragOver()
      Gets the value of the onMouseDragOver property.
      Property description:
      Defines a function to be called when a full press-drag-release gesture progresses within this Node.
      Returns:
      the value of the onMouseDragOver property
      Since:
      JavaFX 2.1
      See Also:

    • onMouseDragOverProperty

      public final ObjectProperty<EventHandler<? super MouseDragEvent>> onMouseDragOverProperty()
      Defines a function to be called when a full press-drag-release gesture progresses within this Node.
      Returns:
      the event handler that is called when a full press-drag-release gesture progresses within this Node
      Since:
      JavaFX 2.1
      See Also:

    • setOnMouseDragReleased

      public final void setOnMouseDragReleased(EventHandler<? super MouseDragEvent> value)
      Sets the value of the onMouseDragReleased property.
      Property description:
      Defines a function to be called when a full press-drag-release gesture ends (by releasing mouse button) within this Node.
      Parameters:
      value - the value for the onMouseDragReleased property
      Since:
      JavaFX 2.1
      See Also:

    • getOnMouseDragReleased

      public final EventHandler<? super MouseDragEvent> getOnMouseDragReleased()
      Gets the value of the onMouseDragReleased property.
      Property description:
      Defines a function to be called when a full press-drag-release gesture ends (by releasing mouse button) within this Node.
      Returns:
      the value of the onMouseDragReleased property
      Since:
      JavaFX 2.1
      See Also:

    • onMouseDragReleasedProperty

      public final ObjectProperty<EventHandler<? super MouseDragEvent>> onMouseDragReleasedProperty()
      Defines a function to be called when a full press-drag-release gesture ends (by releasing mouse button) within this Node.
      Returns:
      the event handler that is called when a full press-drag-release gesture ends (by releasing mouse button) within this Node
      Since:
      JavaFX 2.1
      See Also:

    • setOnMouseDragEntered

      public final void setOnMouseDragEntered(EventHandler<? super MouseDragEvent> value)
      Sets the value of the onMouseDragEntered property.
      Property description:
      Defines a function to be called when a full press-drag-release gesture enters this Node.
      Parameters:
      value - the value for the onMouseDragEntered property
      Since:
      JavaFX 2.1
      See Also:

    • getOnMouseDragEntered

      public final EventHandler<? super MouseDragEvent> getOnMouseDragEntered()
      Gets the value of the onMouseDragEntered property.
      Property description:
      Defines a function to be called when a full press-drag-release gesture enters this Node.
      Returns:
      the value of the onMouseDragEntered property
      Since:
      JavaFX 2.1
      See Also:

    • onMouseDragEnteredProperty

      public final ObjectProperty<EventHandler<? super MouseDragEvent>> onMouseDragEnteredProperty()
      Defines a function to be called when a full press-drag-release gesture enters this Node.
      Returns:
      the event handler that is called when a full press-drag-release gesture enters this Node
      Since:
      JavaFX 2.1
      See Also:

    • setOnMouseDragExited

      public final void setOnMouseDragExited(EventHandler<? super MouseDragEvent> value)
      Sets the value of the onMouseDragExited property.
      Property description:
      Defines a function to be called when a full press-drag-release gesture leaves this Node.
      Parameters:
      value - the value for the onMouseDragExited property
      Since:
      JavaFX 2.1
      See Also:

    • getOnMouseDragExited

      public final EventHandler<? super MouseDragEvent> getOnMouseDragExited()
      Gets the value of the onMouseDragExited property.
      Property description:
      Defines a function to be called when a full press-drag-release gesture leaves this Node.
      Returns:
      the value of the onMouseDragExited property
      Since:
      JavaFX 2.1
      See Also:

    • onMouseDragExitedProperty

      public final ObjectProperty<EventHandler<? super MouseDragEvent>> onMouseDragExitedProperty()
      Defines a function to be called when a full press-drag-release gesture leaves this Node.
      Returns:
      the event handler that is called when a full press-drag-release gesture leaves this Node
      Since:
      JavaFX 2.1
      See Also:

    • setOnScrollStarted

      public final void setOnScrollStarted(EventHandler<? super ScrollEvent> value)
      Sets the value of the onScrollStarted property.
      Property description:
      Defines a function to be called when a scrolling gesture is detected.
      Parameters:
      value - the value for the onScrollStarted property
      Since:
      JavaFX 2.2
      See Also:

    • getOnScrollStarted

      public final EventHandler<? super ScrollEvent> getOnScrollStarted()
      Gets the value of the onScrollStarted property.
      Property description:
      Defines a function to be called when a scrolling gesture is detected.
      Returns:
      the value of the onScrollStarted property
      Since:
      JavaFX 2.2
      See Also:

    • onScrollStartedProperty

      public final ObjectProperty<EventHandler<? super ScrollEvent>> onScrollStartedProperty()
      Defines a function to be called when a scrolling gesture is detected.
      Returns:
      the event handler that is called when a scrolling gesture is detected
      Since:
      JavaFX 2.2
      See Also:

    • setOnScroll

      public final void setOnScroll(EventHandler<? super ScrollEvent> value)
      Sets the value of the onScroll property.
      Property description:
      Defines a function to be called when user performs a scrolling action.
      Parameters:
      value - the value for the onScroll property
      See Also:

    • getOnScroll

      public final EventHandler<? super ScrollEvent> getOnScroll()
      Gets the value of the onScroll property.
      Property description:
      Defines a function to be called when user performs a scrolling action.
      Returns:
      the value of the onScroll property
      See Also:

    • onScrollProperty

      public final ObjectProperty<EventHandler<? super ScrollEvent>> onScrollProperty()
      Defines a function to be called when user performs a scrolling action.
      Returns:
      the event handler that is called when user performs a scrolling action
      See Also:

    • setOnScrollFinished

      public final void setOnScrollFinished(EventHandler<? super ScrollEvent> value)
      Sets the value of the onScrollFinished property.
      Property description:
      Defines a function to be called when a scrolling gesture ends.
      Parameters:
      value - the value for the onScrollFinished property
      Since:
      JavaFX 2.2
      See Also:

    • getOnScrollFinished

      public final EventHandler<? super ScrollEvent> getOnScrollFinished()
      Gets the value of the onScrollFinished property.
      Property description:
      Defines a function to be called when a scrolling gesture ends.
      Returns:
      the value of the onScrollFinished property
      Since:
      JavaFX 2.2
      See Also:

    • onScrollFinishedProperty

      public final ObjectProperty<EventHandler<? super ScrollEvent>> onScrollFinishedProperty()
      Defines a function to be called when a scrolling gesture ends.
      Returns:
      the event handler that is called when a scrolling gesture ends
      Since:
      JavaFX 2.2
      See Also:

    • setOnRotationStarted

      public final void setOnRotationStarted(EventHandler<? super RotateEvent> value)
      Sets the value of the onRotationStarted property.
      Property description:
      Defines a function to be called when a rotation gesture is detected.
      Parameters:
      value - the value for the onRotationStarted property
      Since:
      JavaFX 2.2
      See Also:

    • getOnRotationStarted

      public final EventHandler<? super RotateEvent> getOnRotationStarted()
      Gets the value of the onRotationStarted property.
      Property description:
      Defines a function to be called when a rotation gesture is detected.
      Returns:
      the value of the onRotationStarted property
      Since:
      JavaFX 2.2
      See Also:

    • onRotationStartedProperty

      public final ObjectProperty<EventHandler<? super RotateEvent>> onRotationStartedProperty()
      Defines a function to be called when a rotation gesture is detected.
      Returns:
      the event handler that is called when a rotation gesture is detected
      Since:
      JavaFX 2.2
      See Also:

    • setOnRotate

      public final void setOnRotate(EventHandler<? super RotateEvent> value)
      Sets the value of the onRotate property.
      Property description:
      Defines a function to be called when user performs a rotation action.
      Parameters:
      value - the value for the onRotate property
      Since:
      JavaFX 2.2
      See Also:

    • getOnRotate

      public final EventHandler<? super RotateEvent> getOnRotate()
      Gets the value of the onRotate property.
      Property description:
      Defines a function to be called when user performs a rotation action.
      Returns:
      the value of the onRotate property
      Since:
      JavaFX 2.2
      See Also:

    • onRotateProperty

      public final ObjectProperty<EventHandler<? super RotateEvent>> onRotateProperty()
      Defines a function to be called when user performs a rotation action.
      Returns:
      the event handler that is called when user performs a rotation action
      Since:
      JavaFX 2.2
      See Also:

    • setOnRotationFinished

      public final void setOnRotationFinished(EventHandler<? super RotateEvent> value)
      Sets the value of the onRotationFinished property.
      Property description:
      Defines a function to be called when a rotation gesture ends.
      Parameters:
      value - the value for the onRotationFinished property
      Since:
      JavaFX 2.2
      See Also:

    • getOnRotationFinished

      public final EventHandler<? super RotateEvent> getOnRotationFinished()
      Gets the value of the onRotationFinished property.
      Property description:
      Defines a function to be called when a rotation gesture ends.
      Returns:
      the value of the onRotationFinished property
      Since:
      JavaFX 2.2
      See Also:

    • onRotationFinishedProperty

      public final ObjectProperty<EventHandler<? super RotateEvent>> onRotationFinishedProperty()
      Defines a function to be called when a rotation gesture ends.
      Returns:
      the event handler that is called when a rotation gesture ends
      Since:
      JavaFX 2.2
      See Also:

    • setOnZoomStarted

      public final void setOnZoomStarted(EventHandler<? super ZoomEvent> value)
      Sets the value of the onZoomStarted property.
      Property description:
      Defines a function to be called when a zooming gesture is detected.
      Parameters:
      value - the value for the onZoomStarted property
      Since:
      JavaFX 2.2
      See Also:

    • getOnZoomStarted

      public final EventHandler<? super ZoomEvent> getOnZoomStarted()
      Gets the value of the onZoomStarted property.
      Property description:
      Defines a function to be called when a zooming gesture is detected.
      Returns:
      the value of the onZoomStarted property
      Since:
      JavaFX 2.2
      See Also:

    • onZoomStartedProperty

      public final ObjectProperty<EventHandler<? super ZoomEvent>> onZoomStartedProperty()
      Defines a function to be called when a zooming gesture is detected.
      Returns:
      the event handler that is called when a zooming gesture is detected
      Since:
      JavaFX 2.2
      See Also:

    • setOnZoom

      public final void setOnZoom(EventHandler<? super ZoomEvent> value)
      Sets the value of the onZoom property.
      Property description:
      Defines a function to be called when user performs a zooming action.
      Parameters:
      value - the value for the onZoom property
      Since:
      JavaFX 2.2
      See Also:

    • getOnZoom

      public final EventHandler<? super ZoomEvent> getOnZoom()
      Gets the value of the onZoom property.
      Property description:
      Defines a function to be called when user performs a zooming action.
      Returns:
      the value of the onZoom property
      Since:
      JavaFX 2.2
      See Also:

    • onZoomProperty

      public final ObjectProperty<EventHandler<? super ZoomEvent>> onZoomProperty()
      Defines a function to be called when user performs a zooming action.
      Returns:
      the event handler that is called when user performs a zooming action
      Since:
      JavaFX 2.2
      See Also:

    • setOnZoomFinished

      public final void setOnZoomFinished(EventHandler<? super ZoomEvent> value)
      Sets the value of the onZoomFinished property.
      Property description:
      Defines a function to be called when a zooming gesture ends.
      Parameters:
      value - the value for the onZoomFinished property
      Since:
      JavaFX 2.2
      See Also:

    • getOnZoomFinished

      public final EventHandler<? super ZoomEvent> getOnZoomFinished()
      Gets the value of the onZoomFinished property.
      Property description:
      Defines a function to be called when a zooming gesture ends.
      Returns:
      the value of the onZoomFinished property
      Since:
      JavaFX 2.2
      See Also:

    • onZoomFinishedProperty

      public final ObjectProperty<EventHandler<? super ZoomEvent>> onZoomFinishedProperty()
      Defines a function to be called when a zooming gesture ends.
      Returns:
      the event handler that is called when a zooming gesture ends
      Since:
      JavaFX 2.2
      See Also:

    • setOnSwipeUp

      public final void setOnSwipeUp(EventHandler<? super SwipeEvent> value)
      Sets the value of the onSwipeUp property.
      Property description:
      Defines a function to be called when an upward swipe gesture centered over this node happens.
      Parameters:
      value - the value for the onSwipeUp property
      Since:
      JavaFX 2.2
      See Also:

    • getOnSwipeUp

      public final EventHandler<? super SwipeEvent> getOnSwipeUp()
      Gets the value of the onSwipeUp property.
      Property description:
      Defines a function to be called when an upward swipe gesture centered over this node happens.
      Returns:
      the value of the onSwipeUp property
      Since:
      JavaFX 2.2
      See Also:

    • onSwipeUpProperty

      public final ObjectProperty<EventHandler<? super SwipeEvent>> onSwipeUpProperty()
      Defines a function to be called when an upward swipe gesture centered over this node happens.
      Returns:
      the event handler that is called when an upward swipe gesture centered over this node happens
      Since:
      JavaFX 2.2
      See Also:

    • setOnSwipeDown

      public final void setOnSwipeDown(EventHandler<? super SwipeEvent> value)
      Sets the value of the onSwipeDown property.
      Property description:
      Defines a function to be called when a downward swipe gesture centered over this node happens.
      Parameters:
      value - the value for the onSwipeDown property
      Since:
      JavaFX 2.2
      See Also:

    • getOnSwipeDown

      public final EventHandler<? super SwipeEvent> getOnSwipeDown()
      Gets the value of the onSwipeDown property.
      Property description:
      Defines a function to be called when a downward swipe gesture centered over this node happens.
      Returns:
      the value of the onSwipeDown property
      Since:
      JavaFX 2.2
      See Also:

    • onSwipeDownProperty

      public final ObjectProperty<EventHandler<? super SwipeEvent>> onSwipeDownProperty()
      Defines a function to be called when a downward swipe gesture centered over this node happens.
      Returns:
      the event handler that is called when a downward swipe gesture centered over this node happens
      Since:
      JavaFX 2.2
      See Also:

    • setOnSwipeLeft

      public final void setOnSwipeLeft(EventHandler<? super SwipeEvent> value)
      Sets the value of the onSwipeLeft property.
      Property description:
      Defines a function to be called when a leftward swipe gesture centered over this node happens.
      Parameters:
      value - the value for the onSwipeLeft property
      Since:
      JavaFX 2.2
      See Also:

    • getOnSwipeLeft

      public final EventHandler<? super SwipeEvent> getOnSwipeLeft()
      Gets the value of the onSwipeLeft property.
      Property description:
      Defines a function to be called when a leftward swipe gesture centered over this node happens.
      Returns:
      the value of the onSwipeLeft property
      Since:
      JavaFX 2.2
      See Also:

    • onSwipeLeftProperty

      public final ObjectProperty<EventHandler<? super SwipeEvent>> onSwipeLeftProperty()
      Defines a function to be called when a leftward swipe gesture centered over this node happens.
      Returns:
      the event handler that is called when a leftward swipe gesture centered over this node happens
      Since:
      JavaFX 2.2
      See Also:

    • setOnSwipeRight

      public final void setOnSwipeRight(EventHandler<? super SwipeEvent> value)
      Sets the value of the onSwipeRight property.
      Property description:
      Defines a function to be called when an rightward swipe gesture centered over this node happens.
      Parameters:
      value - the value for the onSwipeRight property
      Since:
      JavaFX 2.2
      See Also:

    • getOnSwipeRight

      public final EventHandler<? super SwipeEvent> getOnSwipeRight()
      Gets the value of the onSwipeRight property.
      Property description:
      Defines a function to be called when an rightward swipe gesture centered over this node happens.
      Returns:
      the value of the onSwipeRight property
      Since:
      JavaFX 2.2
      See Also:

    • onSwipeRightProperty

      public final ObjectProperty<EventHandler<? super SwipeEvent>> onSwipeRightProperty()
      Defines a function to be called when an rightward swipe gesture centered over this node happens.
      Returns:
      the event handler that is called when an rightward swipe gesture centered over this node happens
      Since:
      JavaFX 2.2
      See Also:

    • setOnTouchPressed

      public final void setOnTouchPressed(EventHandler<? super TouchEvent> value)
      Sets the value of the onTouchPressed property.
      Property description:
      Defines a function to be called when a new touch point is pressed.
      Parameters:
      value - the value for the onTouchPressed property
      Since:
      JavaFX 2.2
      See Also:

    • getOnTouchPressed

      public final EventHandler<? super TouchEvent> getOnTouchPressed()
      Gets the value of the onTouchPressed property.
      Property description:
      Defines a function to be called when a new touch point is pressed.
      Returns:
      the value of the onTouchPressed property
      Since:
      JavaFX 2.2
      See Also:

    • onTouchPressedProperty

      public final ObjectProperty<EventHandler<? super TouchEvent>> onTouchPressedProperty()
      Defines a function to be called when a new touch point is pressed.
      Returns:
      the event handler that is called when a new touch point is pressed
      Since:
      JavaFX 2.2
      See Also:

    • setOnTouchMoved

      public final void setOnTouchMoved(EventHandler<? super TouchEvent> value)
      Sets the value of the onTouchMoved property.
      Property description:
      Defines a function to be called when a touch point is moved.
      Parameters:
      value - the value for the onTouchMoved property
      Since:
      JavaFX 2.2
      See Also:

    • getOnTouchMoved

      public final EventHandler<? super TouchEvent> getOnTouchMoved()
      Gets the value of the onTouchMoved property.
      Property description:
      Defines a function to be called when a touch point is moved.
      Returns:
      the value of the onTouchMoved property
      Since:
      JavaFX 2.2
      See Also:

    • onTouchMovedProperty

      public final ObjectProperty<EventHandler<? super TouchEvent>> onTouchMovedProperty()
      Defines a function to be called when a touch point is moved.
      Returns:
      the event handler that is called when a touch point is moved
      Since:
      JavaFX 2.2
      See Also:

    • setOnTouchReleased

      public final void setOnTouchReleased(EventHandler<? super TouchEvent> value)
      Sets the value of the onTouchReleased property.
      Property description:
      Defines a function to be called when a touch point is released.
      Parameters:
      value - the value for the onTouchReleased property
      Since:
      JavaFX 2.2
      See Also:

    • getOnTouchReleased

      public final EventHandler<? super TouchEvent> getOnTouchReleased()
      Gets the value of the onTouchReleased property.
      Property description:
      Defines a function to be called when a touch point is released.
      Returns:
      the value of the onTouchReleased property
      Since:
      JavaFX 2.2
      See Also:

    • onTouchReleasedProperty

      public final ObjectProperty<EventHandler<? super TouchEvent>> onTouchReleasedProperty()
      Defines a function to be called when a touch point is released.
      Returns:
      the event handler that is called when a touch point is released
      Since:
      JavaFX 2.2
      See Also:

    • setOnTouchStationary

      public final void setOnTouchStationary(EventHandler<? super TouchEvent> value)
      Sets the value of the onTouchStationary property.
      Property description:
      Defines a function to be called when a touch point stays pressed and still.
      Parameters:
      value - the value for the onTouchStationary property
      Since:
      JavaFX 2.2
      See Also:

    • getOnTouchStationary

      public final EventHandler<? super TouchEvent> getOnTouchStationary()
      Gets the value of the onTouchStationary property.
      Property description:
      Defines a function to be called when a touch point stays pressed and still.
      Returns:
      the value of the onTouchStationary property
      Since:
      JavaFX 2.2
      See Also:

    • onTouchStationaryProperty

      public final ObjectProperty<EventHandler<? super TouchEvent>> onTouchStationaryProperty()
      Defines a function to be called when a touch point stays pressed and still.
      Returns:
      the event handler that is called when a touch point stays pressed and still
      Since:
      JavaFX 2.2
      See Also:

    • setOnKeyPressed

      public final void setOnKeyPressed(EventHandler<? super KeyEvent> value)
      Sets the value of the onKeyPressed property.
      Property description:
      Defines a function to be called when this Node or its child Node has input focus and a key has been pressed. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      Parameters:
      value - the value for the onKeyPressed property
      See Also:

    • getOnKeyPressed

      public final EventHandler<? super KeyEvent> getOnKeyPressed()
      Gets the value of the onKeyPressed property.
      Property description:
      Defines a function to be called when this Node or its child Node has input focus and a key has been pressed. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      Returns:
      the value of the onKeyPressed property
      See Also:

    • onKeyPressedProperty

      public final ObjectProperty<EventHandler<? super KeyEvent>> onKeyPressedProperty()
      Defines a function to be called when this Node or its child Node has input focus and a key has been pressed. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      Returns:
      the event handler that is called when this Node or its child Node has input focus and a key has been pressed
      See Also:

    • setOnKeyReleased

      public final void setOnKeyReleased(EventHandler<? super KeyEvent> value)
      Sets the value of the onKeyReleased property.
      Property description:
      Defines a function to be called when this Node or its child Node has input focus and a key has been released. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      Parameters:
      value - the value for the onKeyReleased property
      See Also:

    • getOnKeyReleased

      public final EventHandler<? super KeyEvent> getOnKeyReleased()
      Gets the value of the onKeyReleased property.
      Property description:
      Defines a function to be called when this Node or its child Node has input focus and a key has been released. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      Returns:
      the value of the onKeyReleased property
      See Also:

    • onKeyReleasedProperty

      public final ObjectProperty<EventHandler<? super KeyEvent>> onKeyReleasedProperty()
      Defines a function to be called when this Node or its child Node has input focus and a key has been released. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      Returns:
      the event handler that is called when this Node or its child Node has input focus and a key has been released
      See Also:

    • setOnKeyTyped

      public final void setOnKeyTyped(EventHandler<? super KeyEvent> value)
      Sets the value of the onKeyTyped property.
      Property description:
      Defines a function to be called when this Node or its child Node has input focus and a key has been typed. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      Parameters:
      value - the value for the onKeyTyped property
      See Also:

    • getOnKeyTyped

      public final EventHandler<? super KeyEvent> getOnKeyTyped()
      Gets the value of the onKeyTyped property.
      Property description:
      Defines a function to be called when this Node or its child Node has input focus and a key has been typed. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      Returns:
      the value of the onKeyTyped property
      See Also:

    • onKeyTypedProperty

      public final ObjectProperty<EventHandler<? super KeyEvent>> onKeyTypedProperty()
      Defines a function to be called when this Node or its child Node has input focus and a key has been typed. The function is called only if the event hasn't been already consumed during its capturing or bubbling phase.
      Returns:
      the event handler that is called when this Node or its child Node has input focus and a key has been typed
      See Also:

    • setOnInputMethodTextChanged

      public final void setOnInputMethodTextChanged(EventHandler<? super InputMethodEvent> value)
      Sets the value of the onInputMethodTextChanged property.
      Property description:
      Defines a function to be called when this Node has input focus and the input method text has changed. If this function is not defined in this Node, then it receives the result string of the input method composition as a series of onKeyTyped function calls.

      When the Node loses the input focus, the JavaFX runtime automatically commits the existing composed text if any.

      Parameters:
      value - the value for the onInputMethodTextChanged property
      See Also:

    • getOnInputMethodTextChanged

      public final EventHandler<? super InputMethodEvent> getOnInputMethodTextChanged()
      Gets the value of the onInputMethodTextChanged property.
      Property description:
      Defines a function to be called when this Node has input focus and the input method text has changed. If this function is not defined in this Node, then it receives the result string of the input method composition as a series of onKeyTyped function calls.

      When the Node loses the input focus, the JavaFX runtime automatically commits the existing composed text if any.

      Returns:
      the value of the onInputMethodTextChanged property
      See Also:

    • onInputMethodTextChangedProperty

      public final ObjectProperty<EventHandler<? super InputMethodEvent>> onInputMethodTextChangedProperty()
      Defines a function to be called when this Node has input focus and the input method text has changed. If this function is not defined in this Node, then it receives the result string of the input method composition as a series of onKeyTyped function calls.

      When the Node loses the input focus, the JavaFX runtime automatically commits the existing composed text if any.

      Returns:
      the event handler that is called when this Node has input focus and the input method text has changed
      See Also:

    • setInputMethodRequests

      public final void setInputMethodRequests(InputMethodRequests value)
      Sets the value of the inputMethodRequests property.
      Property description:
      Property holding InputMethodRequests.
      Parameters:
      value - the value for the inputMethodRequests property
      See Also:

    • getInputMethodRequests

      public final InputMethodRequests getInputMethodRequests()
      Gets the value of the inputMethodRequests property.
      Property description:
      Property holding InputMethodRequests.
      Returns:
      the value of the inputMethodRequests property
      See Also:

    • inputMethodRequestsProperty

      public final ObjectProperty<InputMethodRequests> inputMethodRequestsProperty()
      Property holding InputMethodRequests.
      Returns:
      InputMethodRequestsProperty
      See Also:

    • setFocused

      protected final void setFocused(boolean value)
      Sets the value of the focused property.
      Property description:
      Indicates whether this Node currently has the input focus. To have the input focus, a node must be the Scene's focus owner, and the scene must be in a Stage that is visible and active. See requestFocus() for more information.
      Default value:
      false
      Parameters:
      value - the value for the focused property
      See Also:

    • isFocused

      public final boolean isFocused()
      Gets the value of the focused property.
      Property description:
      Indicates whether this Node currently has the input focus. To have the input focus, a node must be the Scene's focus owner, and the scene must be in a Stage that is visible and active. See requestFocus() for more information.
      Default value:
      false
      Returns:
      the value of the focused property
      See Also:

    • focusedProperty

      public final ReadOnlyBooleanProperty focusedProperty()
      Indicates whether this Node currently has the input focus. To have the input focus, a node must be the Scene's focus owner, and the scene must be in a Stage that is visible and active. See requestFocus() for more information.
      Default value:
      false
      Returns:
      the focused property
      See Also:

    • isFocusVisible

      public final boolean isFocusVisible()
      Gets the value of the focusVisible property.
      Property description:
      Indicates whether this Node should visibly indicate focus. This flag is set when the node acquires input focus via keyboard navigation, and it is cleared when the node loses focus or when requestFocus() is called.
      Default value:
      false
      Returns:
      the value of the focusVisible property
      Since:
      19
      See Also:

    • focusVisibleProperty

      public final ReadOnlyBooleanProperty focusVisibleProperty()
      Indicates whether this Node should visibly indicate focus. This flag is set when the node acquires input focus via keyboard navigation, and it is cleared when the node loses focus or when requestFocus() is called.
      Default value:
      false
      Returns:
      the focusVisible property
      Since:
      19
      See Also:

    • isFocusWithin

      public final boolean isFocusWithin()
      Gets the value of the focusWithin property.
      Property description:
      Indicates whether this Node or any of its descendants currently has the input focus.
      Default value:
      false
      Returns:
      the value of the focusWithin property
      Since:
      19
      See Also:

    • focusWithinProperty

      public final ReadOnlyBooleanProperty focusWithinProperty()
      Indicates whether this Node or any of its descendants currently has the input focus.
      Default value:
      false
      Returns:
      the focusWithin property
      Since:
      19
      See Also:

    • setFocusTraversable

      public final void setFocusTraversable(boolean value)
      Sets the value of the focusTraversable property.
      Property description:
      Specifies whether this Node should be a part of focus traversal cycle. When this property is true focus can be moved to this Node and from this Node using regular focus traversal keys. On a desktop such keys are usually TAB for moving focus forward and SHIFT+TAB for moving focus backward. When a Scene is created, the system gives focus to a Node whose focusTraversable variable is true and that is eligible to receive the focus, unless the focus had been set explicitly via a call to requestFocus().
      Default value:
      false
      Parameters:
      value - the value for the focusTraversable property
      See Also:

    • isFocusTraversable

      public final boolean isFocusTraversable()
      Gets the value of the focusTraversable property.
      Property description:
      Specifies whether this Node should be a part of focus traversal cycle. When this property is true focus can be moved to this Node and from this Node using regular focus traversal keys. On a desktop such keys are usually TAB for moving focus forward and SHIFT+TAB for moving focus backward. When a Scene is created, the system gives focus to a Node whose focusTraversable variable is true and that is eligible to receive the focus, unless the focus had been set explicitly via a call to requestFocus().
      Default value:
      false
      Returns:
      the value of the focusTraversable property
      See Also:

    • focusTraversableProperty

      public final BooleanProperty focusTraversableProperty()
      Specifies whether this Node should be a part of focus traversal cycle. When this property is true focus can be moved to this Node and from this Node using regular focus traversal keys. On a desktop such keys are usually TAB for moving focus forward and SHIFT+TAB for moving focus backward. When a Scene is created, the system gives focus to a Node whose focusTraversable variable is true and that is eligible to receive the focus, unless the focus had been set explicitly via a call to requestFocus().
      Default value:
      false
      Returns:
      the focusTraversable property
      See Also:

    • requestFocus

      public void requestFocus()
      Requests that this Node get the input focus, and that this Node's top-level ancestor become the focused window. To be eligible to receive the focus, the node must be part of a scene, it and all of its ancestors must be visible, and it must not be disabled. If this node is eligible, this function will cause it to become this Scene's "focus owner". Each scene has at most one focus owner node. The focus owner will not actually have the input focus, however, unless the scene belongs to a Stage that is both visible and active.

      This method will clear the focusVisible flag.

    • toString

      public String toString()
      Returns a string representation for the object.
      Overrides:
      toString in class Object
      Returns:
      a string representation for the object.

    • setEventDispatcher

      public final void setEventDispatcher(EventDispatcher value)
      Sets the value of the eventDispatcher property.
      Property description:
      Specifies the event dispatcher for this node. The default event dispatcher sends the received events to the registered event handlers and filters. When replacing the value with a new EventDispatcher, the new dispatcher should forward events to the replaced dispatcher to maintain the node's default event handling behavior.
      Parameters:
      value - the value for the eventDispatcher property
      See Also:

    • getEventDispatcher

      public final EventDispatcher getEventDispatcher()
      Gets the value of the eventDispatcher property.
      Property description:
      Specifies the event dispatcher for this node. The default event dispatcher sends the received events to the registered event handlers and filters. When replacing the value with a new EventDispatcher, the new dispatcher should forward events to the replaced dispatcher to maintain the node's default event handling behavior.
      Returns:
      the value of the eventDispatcher property
      See Also:

    • eventDispatcherProperty

      public final ObjectProperty<EventDispatcher> eventDispatcherProperty()
      Specifies the event dispatcher for this node. The default event dispatcher sends the received events to the registered event handlers and filters. When replacing the value with a new EventDispatcher, the new dispatcher should forward events to the replaced dispatcher to maintain the node's default event handling behavior.
      Returns:
      the eventDispatcher property
      See Also:

    • addEventHandler

      public final <T extends Event> void addEventHandler(EventType<T> eventType, EventHandler<? super T> eventHandler)
      Description copied from interface: EventTarget
      Registers an event handler for this target.

      The handler is called when the target receives an Event of the specified type during the bubbling phase of event delivery.

      Specified by:
      addEventHandler in interface EventTarget
      Type Parameters:
      T - the event class of the handler
      Parameters:
      eventType - the type of the events received by the handler
      eventHandler - the event handler

    • removeEventHandler

      public final <T extends Event> void removeEventHandler(EventType<T> eventType, EventHandler<? super T> eventHandler)
      Description copied from interface: EventTarget
      Unregisters a previously registered event handler from this target.

      Since it is possible to register a single EventHandler instance for different event types, the caller needs to specify the event type from which the handler should be unregistered.

      Specified by:
      removeEventHandler in interface EventTarget
      Type Parameters:
      T - the event class of the handler
      Parameters:
      eventType - the event type from which to unregister
      eventHandler - the event handler

    • addEventFilter

      public final <T extends Event> void addEventFilter(EventType<T> eventType, EventHandler<? super T> eventFilter)
      Description copied from interface: EventTarget
      Registers an event filter for this target.

      The filter is called when the target receives an Event of the specified type during the capturing phase of event delivery.

      Specified by:
      addEventFilter in interface EventTarget
      Type Parameters:
      T - the event class of the filter
      Parameters:
      eventType - the type of the events received by the filter
      eventFilter - the event filter

    • removeEventFilter

      public final <T extends Event> void removeEventFilter(EventType<T> eventType, EventHandler<? super T> eventFilter)
      Description copied from interface: EventTarget
      Unregisters a previously registered event filter from this target.

      Since it is possible to register a single EventHandler instance for different event types, the caller needs to specify the event type from which the filter should be unregistered.

      Specified by:
      removeEventFilter in interface EventTarget
      Type Parameters:
      T - the event class of the filter
      Parameters:
      eventType - the event type from which to unregister
      eventFilter - the event filter

    • setEventHandler

      protected final <T extends Event> void setEventHandler(EventType<T> eventType, EventHandler<? super T> eventHandler)
      Sets the handler to use for this event type. There can only be one such handler specified at a time. This handler is guaranteed to be called as the last, after handlers added using addEventHandler(javafx.event.EventType, javafx.event.EventHandler). This is used for registering the user-defined onFoo event handlers.
      Type Parameters:
      T - the specific event class of the handler
      Parameters:
      eventType - the event type to associate with the given eventHandler
      eventHandler - the handler to register, or null to unregister
      Throws:
      NullPointerException - if the event type is null

    • buildEventDispatchChain

      public EventDispatchChain buildEventDispatchChain(EventDispatchChain tail)
      Description copied from interface: EventTarget
      Construct an event dispatch chain for this target. The event dispatch chain contains event dispatchers which might be interested in processing of events targeted at this EventTarget. This event target is not automatically added to the chain, so if it wants to process events, it needs to add an EventDispatcher for itself to the chain.

      In the case the event target is part of some hierarchy, the chain for it is usually built from event dispatchers collected from the root of the hierarchy to the event target.

      The event dispatch chain is constructed by modifications to the provided initial event dispatch chain. The returned chain should have the initial chain at its end so the dispatchers should be prepended to the initial chain.

      The caller shouldn't assume that the initial chain remains unchanged nor that the returned value will reference a different chain.

      Specified by:
      buildEventDispatchChain in interface EventTarget
      Parameters:
      tail - the initial chain to build from
      Returns:
      the resulting event dispatch chain for this target

    • fireEvent

      public final void fireEvent(Event event)
      Fires the specified event. By default the event will travel through the hierarchy from the stage to this node. Any event filter encountered will be notified and can consume the event. If not consumed by the filters, the event handlers on this node are notified. If these don't consume the event either, the event will travel back the same path it arrived to this node. All event handlers encountered are called and can consume the event.

      This method must be called on the FX user thread.

      Parameters:
      event - the event to fire

    • getTypeSelector

      public String getTypeSelector()
      The type of this Styleable that is to be used in selector matching. This is analogous to an "element" in HTML. (CSS Type Selector).
      Specified by:
      getTypeSelector in interface Styleable
      Returns:
      getClass().getName() without the package name
      Since:
      JavaFX 8.0

    • getStyleableParent

      public Styleable getStyleableParent()
      Return the parent of this Styleable, or null if there is no parent.
      Specified by:
      getStyleableParent in interface Styleable
      Returns:
      getParent()
      Since:
      JavaFX 8.0

    • getInitialFocusTraversable

      protected Boolean getInitialFocusTraversable()
      Returns the initial focus traversable state of this node, for use by the JavaFX CSS engine to correctly set its initial value. This method can be overridden by subclasses in instances where focus traversable should initially be true (as the default implementation of this method is to return false).
      Returns:
      the initial focus traversable state for this Node.
      Since:
      9

    • getInitialCursor

      protected Cursor getInitialCursor()
      Returns the initial cursor state of this node, for use by the JavaFX CSS engine to correctly set its initial value. This method can be overridden by subclasses in instances where the cursor should initially be non-null (as the default implementation of this method is to return null).
      Returns:
      the initial cursor state for this Node.
      Since:
      9

    • getClassCssMetaData

      public static List<CssMetaData<? extends Styleable,?>> getClassCssMetaData()
      Gets the CssMetaData associated with this class, which may include the CssMetaData of its superclasses.
      Returns:
      the CssMetaData
      Since:
      JavaFX 8.0

    • getCssMetaData

      public List<CssMetaData<? extends Styleable,?>> getCssMetaData()
      This method should delegate to getClassCssMetaData() so that a Node's CssMetaData can be accessed without the need for reflection.
      Specified by:
      getCssMetaData in interface Styleable
      Returns:
      The CssMetaData associated with this node, which may include the CssMetaData of its superclasses.
      Since:
      JavaFX 8.0

    • pseudoClassStateChanged

      public final void pseudoClassStateChanged(PseudoClass pseudoClass, boolean active)
      Used to specify that a pseudo-class of this Node has changed. If the pseudo-class is used in a CSS selector that matches this Node, CSS will be reapplied. Typically, this method is called from the invalidated method of a property that is used as a pseudo-class. For example: 
      

     private static final PseudoClass MY_PSEUDO_CLASS_STATE = PseudoClass.getPseudoClass("my-state");

     BooleanProperty myPseudoClassState = new BooleanPropertyBase(false) {

           @Override public void invalidated() {
                pseudoClassStateChanged(MY_PSEUDO_CLASS_STATE, get());
           }

           @Override public Object getBean() {
               return MyControl.this;
           }

           @Override public String getName() {
               return "myPseudoClassState";
           }
       };
      Parameters:
      pseudoClass - the pseudo-class that has changed state
      active - whether or not the state is active
      Since:
      JavaFX 8.0

    • getPseudoClassStates

      public final ObservableSet<PseudoClass> getPseudoClassStates()
      Description copied from interface: Styleable
      Return the pseudo-class state of this Styleable. CSS assumes this set is read-only.
      Specified by:
      getPseudoClassStates in interface Styleable
      Returns:
      The active pseudo-class states of this Node, wrapped in an unmodifiable ObservableSet
      Since:
      JavaFX 8.0

    • applyCss

      public final void applyCss()
      If required, apply styles to this Node and its children, if any. This method does not normally need to be invoked directly but may be used in conjunction with Parent.layout() to size a Node before the next pulse, or if the Scene is not in a Stage.

      Provided that the Node's Scene is not null, CSS is applied to this Node regardless of whether this Node's CSS state is clean. CSS styles are applied from the top-most parent of this Node whose CSS state is other than clean, which may affect the styling of other nodes. This method is a no-op if the Node is not in a Scene. The Scene does not have to be in a Stage.

      This method does not invoke the Parent.layout() method. Typically, the caller will use the following sequence of operations.

      
     parentNode.applyCss();
     parentNode.layout();

      As a more complete example, the following code uses applyCss() and layout() to find the width and height of the Button before the Stage has been shown. If either the call to applyCss() or the call to layout() is commented out, the calls to getWidth() and getHeight() will return zero (until some time after the Stage is shown). 

      
 @Override
 public void start(Stage stage) throws Exception {

    Group root = new Group();
    Scene scene = new Scene(root);

    Button button = new Button("Hello World");
    root.getChildren().add(button);

    root.applyCss();
    root.layout();

    double width = button.getWidth();
    double height = button.getHeight();

    System.out.println(width + ", " + height);

    stage.setScene(scene);
    stage.show();
 }
      Since:
      JavaFX 8.0

    • setAccessibleRole

      public final void setAccessibleRole(AccessibleRole value)
      Sets the value of the accessibleRole property.
      Property description:
      The accessible role for this Node.

      The screen reader uses the role of a node to determine the attributes and actions that are supported.

      Default value:
      AccessibleRole.NODE
      Parameters:
      value - the value for the accessibleRole property
      Since:
      JavaFX 8u40
      See Also:

    • getAccessibleRole

      public final AccessibleRole getAccessibleRole()
      Gets the value of the accessibleRole property.
      Property description:
      The accessible role for this Node.

      The screen reader uses the role of a node to determine the attributes and actions that are supported.

      Default value:
      AccessibleRole.NODE
      Returns:
      the value of the accessibleRole property
      Since:
      JavaFX 8u40
      See Also:

    • accessibleRoleProperty

      public final ObjectProperty<AccessibleRole> accessibleRoleProperty()
      The accessible role for this Node.

      The screen reader uses the role of a node to determine the attributes and actions that are supported.

      Default value:
      AccessibleRole.NODE
      Returns:
      the accessibleRole property
      Since:
      JavaFX 8u40
      See Also:

    • setAccessibleRoleDescription

      public final void setAccessibleRoleDescription(String value)
      Sets the value of the accessibleRoleDescription property.
      Property description:
      The role description of this Node.

      Normally, when a role is provided for a node, the screen reader speaks the role as well as the contents of the node. When this value is set, it is possible to override the default. This is useful because the set of roles is predefined. For example, it is possible to set the role of a node to be a button, but have the role description be arbitrary text.

      Default value:
      null
      Parameters:
      value - the value for the accessibleRoleDescription property
      Since:
      JavaFX 8u40
      See Also:

    • getAccessibleRoleDescription

      public final String getAccessibleRoleDescription()
      Gets the value of the accessibleRoleDescription property.
      Property description:
      The role description of this Node.

      Normally, when a role is provided for a node, the screen reader speaks the role as well as the contents of the node. When this value is set, it is possible to override the default. This is useful because the set of roles is predefined. For example, it is possible to set the role of a node to be a button, but have the role description be arbitrary text.

      Default value:
      null
      Returns:
      the value of the accessibleRoleDescription property
      Since:
      JavaFX 8u40
      See Also:

    • accessibleRoleDescriptionProperty

      public final ObjectProperty<String> accessibleRoleDescriptionProperty()
      The role description of this Node.

      Normally, when a role is provided for a node, the screen reader speaks the role as well as the contents of the node. When this value is set, it is possible to override the default. This is useful because the set of roles is predefined. For example, it is possible to set the role of a node to be a button, but have the role description be arbitrary text.

      Default value:
      null
      Returns:
      the role description of this Node.
      Since:
      JavaFX 8u40
      See Also:

    • setAccessibleText

      public final void setAccessibleText(String value)
      Sets the value of the accessibleText property.
      Property description:
      The accessible text for this Node.

      This property is used to set the text that the screen reader will speak. If a node normally speaks text, that text is overriden. For example, a button usually speaks using the text in the control but will no longer do this when this value is set.

      Default value:
      null
      Parameters:
      value - the value for the accessibleText property
      Since:
      JavaFX 8u40
      See Also:

    • getAccessibleText

      public final String getAccessibleText()
      Gets the value of the accessibleText property.
      Property description:
      The accessible text for this Node.

      This property is used to set the text that the screen reader will speak. If a node normally speaks text, that text is overriden. For example, a button usually speaks using the text in the control but will no longer do this when this value is set.

      Default value:
      null
      Returns:
      the value of the accessibleText property
      Since:
      JavaFX 8u40
      See Also:

    • accessibleTextProperty

      public final ObjectProperty<String> accessibleTextProperty()
      The accessible text for this Node.

      This property is used to set the text that the screen reader will speak. If a node normally speaks text, that text is overriden. For example, a button usually speaks using the text in the control but will no longer do this when this value is set.

      Default value:
      null
      Returns:
      accessible text for this Node.
      Since:
      JavaFX 8u40
      See Also:

    • setAccessibleHelp

      public final void setAccessibleHelp(String value)
      Sets the value of the accessibleHelp property.
      Property description:
      The accessible help text for this Node.

      The help text provides a more detailed description of the accessible text for a node. By default, if the node has a tool tip, this text is used.

      Default value:
      null
      Parameters:
      value - the value for the accessibleHelp property
      Since:
      JavaFX 8u40
      See Also:

    • getAccessibleHelp

      public final String getAccessibleHelp()
      Gets the value of the accessibleHelp property.
      Property description:
      The accessible help text for this Node.

      The help text provides a more detailed description of the accessible text for a node. By default, if the node has a tool tip, this text is used.

      Default value:
      null
      Returns:
      the value of the accessibleHelp property
      Since:
      JavaFX 8u40
      See Also:

    • accessibleHelpProperty

      public final ObjectProperty<String> accessibleHelpProperty()
      The accessible help text for this Node.

      The help text provides a more detailed description of the accessible text for a node. By default, if the node has a tool tip, this text is used.

      Default value:
      null
      Returns:
      the accessible help text for this Node.
      Since:
      JavaFX 8u40
      See Also:

    • queryAccessibleAttribute

      public Object queryAccessibleAttribute(AccessibleAttribute attribute, Object... parameters)
      This method is called by the assistive technology to request the value for an attribute.

      This method is commonly overridden by subclasses to implement attributes that are required for a specific role.
      If a particular attribute is not handled, the superclass implementation must be called.

      Parameters:
      attribute - the requested attribute
      parameters - optional list of parameters
      Returns:
      the value for the requested attribute
      Since:
      JavaFX 8u40
      See Also:

    • executeAccessibleAction

      public void executeAccessibleAction(AccessibleAction action, Object... parameters)
      This method is called by the assistive technology to request the action indicated by the argument should be executed.

      This method is commonly overridden by subclasses to implement action that are required for a specific role.
      If a particular action is not handled, the superclass implementation must be called.

      Parameters:
      action - the action to execute
      parameters - optional list of parameters
      Since:
      JavaFX 8u40
      See Also:

    • notifyAccessibleAttributeChanged

      public final void notifyAccessibleAttributeChanged(AccessibleAttribute attributes)
      This method is called by the application to notify the assistive technology that the value for an attribute has changed.
      Parameters:
      attributes - the attribute whose value has changed
      Since:
      JavaFX 8u40
      See Also: