Test two objects for inequality.

Equivalent to x.hashCode except for boxed numeric types and null. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For null returns a hashcode where null.hashCode throws a NullPointerException.

Alias for concat

The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).

Appends all elements of this $coll to a string builder. The written text consists of the string representations (w.r.t. the method toString) of all elements of this $coll without any separator string.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> val h = a.addString(b)
h: StringBuilder = 1234

Appends all elements of this $coll to a string builder using a separator string. The written text consists of the string representations (w.r.t. the method toString) of all elements of this $coll, separated by the string sep.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> a.addString(b, ", ")
res0: StringBuilder = 1, 2, 3, 4

Appends all elements of this $coll to a string builder using start, end, and separator strings. The written text begins with the string start and ends with the string end. Inside, the string representations (w.r.t. the method toString) of all elements of this $coll are separated by the string sep.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> a.addString(b , "List(" , ", " , ")")
res5: StringBuilder = List(1, 2, 3, 4)

Cast the receiver object to be of type T0.

Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expression List(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested type.

Defines the prefix of this object's toString representation.

It is recommended to return the name of the concrete collection type, but not implementation subclasses. For example, for ListMap this method should return "ListMap", not "Map" (the supertype) or "Node" (an implementation subclass).

The default implementation returns "Iterable". It is overridden for the basic collection kinds "Seq", "IndexedSeq", "LinearSeq", "Buffer", "Set", "Map", "SortedSet", "SortedMap" and "View".

Create a copy of the receiver object.

The default implementation of the clone method is platform dependent.

Builds a new iterable collection by applying a partial function to all elements of this iterable collection on which the function is defined.

Finds the first element of the $coll for which the given partial function is defined, and applies the partial function to it.

$mayNotTerminateInf $orderDependent

Returns a new iterable collection containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the iterable collection is the most specific superclass encompassing the element types of the two operands.

Note: will not terminate for infinite-sized collections.

Note: will not terminate for infinite-sized collections.

Note: will not terminate for infinite-sized collections.

Tests whether every element of this collection's iterator relates to the corresponding element of another collection by satisfying a test predicate.

Counts the number of elements in the $coll which satisfy a predicate.

Selects all elements except first n ones.

Note: might return different results for different runs, unless the underlying collection type is ordered.

The rest of the collection without its n last elements. For linear, immutable collections this should avoid making a copy.

Note: Even when applied to a view or a lazy collection it will always force the elements.

Drops longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Tests whether the argument (that) is a reference to the receiver object (this).

The eq method implements an equivalence relation on non-null instances of AnyRef, and has three additional properties:

• It is consistent: for any non-null instances x and y of type AnyRef, multiple invocations of x.eq(y) consistently returns true or consistently returns false.
• For any non-null instance x of type AnyRef, x.eq(null) and null.eq(x) returns false.
• null.eq(null) returns true.

When overriding the equals or hashCode methods, it is important to ensure that their behavior is consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).

The equality method for reference types. Default implementation delegates to eq.

See also equals in scala.Any.

Tests whether a predicate holds for at least one element of this $coll.

$mayNotTerminateInf

Selects all elements of this iterable collection which satisfy a predicate.

Selects all elements of this iterable collection which do not satisfy a predicate.

Called by the garbage collector on the receiver object when there are no more references to the object.

The details of when and if the finalize method is invoked, as well as the interaction between finalize and non-local returns and exceptions, are all platform dependent.

Finds the first element of the $coll satisfying a predicate, if any.

$mayNotTerminateInf $orderDependent

Builds a new iterable collection by applying a function to all elements of this iterable collection and using the elements of the resulting collections.

For example:

def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")

The type of the resulting collection is guided by the static type of iterable collection. This might cause unexpected results sometimes. For example:

// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set
def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet)

// lettersOf will return a Set[Char], not a Seq
def lettersOf(words: Seq[String]) = words.toSet flatMap ((word: String) => word.toSeq)

// xs will be an Iterable[Int]
val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2)

// ys will be a Map[Int, Int]
val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)

Converts this iterable collection of traversable collections into a iterable collection formed by the elements of these traversable collections.

The resulting collection's type will be guided by the type of iterable collection. For example:

val xs = List(
           Set(1, 2, 3),
           Set(1, 2, 3)
         ).flatten
// xs == List(1, 2, 3, 1, 2, 3)

val ys = Set(
           List(1, 2, 3),
           List(3, 2, 1)
         ).flatten
// ys == Set(1, 2, 3)

Applies a binary operator to a start value and all elements of this $coll, going left to right.

$willNotTerminateInf $orderDependentFold

Applies a binary operator to all elements of this $coll and a start value, going right to left.

$willNotTerminateInf $orderDependentFold

Tests whether a predicate holds for all elements of this $coll.

$mayNotTerminateInf

Apply f to each element for its side effects Note: [U] parameter needed to help scalac's type inference.

Returns string formatted according to given format string. Format strings are as for String.format (@see java.lang.String.format).

Defines how to turn a given Iterable[A] into a collection of type C.

This process can be done in a strict way or a non-strict way (ie. without evaluating the elements of the resulting collections). In other words, this methods defines the evaluation model of the collection.

Returns the runtime class representation of the object.

Partitions this iterable collection into a map of iterable collections according to some discriminator function.

Note: Even when applied to a view or a lazy collection it will always force the elements.

Partitions this iterable collection into a map of iterable collections according to a discriminator function key. Each element in a group is transformed into a value of type B using the value function.

It is equivalent to groupBy(key).mapValues(_.map(f)), but more efficient.

case class User(name: String, age: Int)

def namesByAge(users: Seq[User]): Map[Int, Seq[String]] =
  users.groupMap(_.age)(_.name)

Note: Even when applied to a view or a lazy collection it will always force the elements.

Partitions this iterable collection into a map according to a discriminator function key. All the values that have the same discriminator are then transformed by the value function and then reduced into a single value with the reduce function.

It is equivalent to groupBy(key).mapValues(_.map(f).reduce(reduce)), but more efficient.

def occurrences[A](as: Seq[A]): Map[A, Int] =
  as.groupMapReduce(identity)(_ => 1)(_ + _)

Partitions elements in fixed size iterable collections.

The hashCode method for reference types. See hashCode in scala.Any.

Selects the first element of this iterable collection.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Optionally selects the first element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

The initial part of the collection without its last element.

Iterates over the inits of this iterable collection. The first value will be this iterable collection and the final one will be an empty iterable collection, with the intervening values the results of successive applications of init.

Tests whether the view is empty.

Note: Implementations in subclasses that are not repeatedly traversable must take care not to consume any elements when isEmpty is called.

Test whether the dynamic type of the receiver object is T0.

Note that the result of the test is modulo Scala's erasure semantics. Therefore the expression 1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will return true. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the specified type.

Tests whether this iterable collection can be repeatedly traversed. Always true for Iterables and false for Iterators unless overridden.

Iterator can be used only once

Selects the last element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Optionally selects the last element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Analogous to zip except that the elements in each collection are not consumed until a strict operation is invoked on the returned LazyZip2 decorator.

Calls to lazyZip can be chained to support higher arities (up to 4) without incurring the expense of constructing and deconstructing intermediary tuples.

val xs = List(1, 2, 3)
val res = (xs lazyZip xs lazyZip xs lazyZip xs).map((a, b, c, d) => a + b + c + d)
// res == List(4, 8, 12)

Builds a new iterable collection by applying a function to all elements of this iterable collection.

Finds the largest element.

Finds the first element which yields the largest value measured by function f.

Finds the first element which yields the largest value measured by function f.

Finds the largest element.

Finds the smallest element.

Finds the first element which yields the smallest value measured by function f.

Finds the first element which yields the smallest value measured by function f.

Finds the smallest element.

Displays all elements of this $coll in a string.

Delegates to addString, which can be overridden.

Displays all elements of this $coll in a string using a separator string.

Delegates to addString, which can be overridden.

Displays all elements of this $coll in a string using start, end, and separator strings.

Delegates to addString, which can be overridden.

Equivalent to !(this eq that).

Tests whether the $coll is not empty.

Wakes up a single thread that is waiting on the receiver object's monitor.

Wakes up all threads that are waiting on the receiver object's monitor.

A pair of, first, all elements that satisfy predicate p and, second, all elements that do not. Interesting because it splits a collection in two.

The default implementation provided here needs to traverse the collection twice. Strict collections have an overridden version of partition in StrictOptimizedIterableOps, which requires only a single traversal.

A pair of iterable collections, first, consisting of the values that are produced by f applied to this iterable collection elements contained in scala.util.Left and, second, all the values contained in scala.util.Right.

Example:

val xs = Iterable(1, "one", 2, "two", 3, "three") partitionWith {
 case i: Int => Left(i)
 case s: String => Right(s)
}
// xs == (Iterable(1, 2, 3),
//        Iterable(one, two, three))

Multiplies up the elements of this collection.

Reduces the elements of this $coll using the specified associative binary operator.

$undefinedorder

Applies a binary operator to all elements of this $coll, going left to right. $willNotTerminateInf $orderDependentFold

Optionally applies a binary operator to all elements of this $coll, going left to right. $willNotTerminateInf $orderDependentFold

Reduces the elements of this $coll, if any, using the specified associative binary operator.

$undefinedorder

Applies a binary operator to all elements of this $coll, going right to left. $willNotTerminateInf $orderDependentFold

Optionally applies a binary operator to all elements of this $coll, going right to left. $willNotTerminateInf $orderDependentFold

Produces a iterable collection containing cumulative results of applying the operator going left to right, including the initial value.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Example:

List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)

The size of this $coll.

$willNotTerminateInf

Compares the size of this iterable collection to the size of another Iterable.

Compares the size of this iterable collection to a test value.

Returns a value class containing operations for comparing the size of this iterable collection to a test value.

These operations are implemented in terms of sizeCompare(Int), and allow the following more readable usages:

this.sizeIs < size     // this.sizeCompare(size) < 0
this.sizeIs <= size    // this.sizeCompare(size) <= 0
this.sizeIs == size    // this.sizeCompare(size) == 0
this.sizeIs != size    // this.sizeCompare(size) != 0
this.sizeIs >= size    // this.sizeCompare(size) >= 0
this.sizeIs > size     // this.sizeCompare(size) > 0

Selects an interval of elements. The returned iterable collection is made up of all elements x which satisfy the invariant:

from <= indexOf(x) < until

Note: might return different results for different runs, unless the underlying collection type is ordered.

Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)

Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.) The "sliding window" step is set to one.

Splits this iterable collection into a prefix/suffix pair according to a predicate.

Note: c span p is equivalent to (but possibly more efficient than) (c takeWhile p, c dropWhile p), provided the evaluation of the predicate p does not cause any side-effects.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Splits this iterable collection into two at a given position. Note: c splitAt n is equivalent to (but possibly more efficient than) (c take n, c drop n).

Note: might return different results for different runs, unless the underlying collection type is ordered.

Sums up the elements of this collection.

The rest of the collection without its first element.

Iterates over the tails of this iterable collection. The first value will be this iterable collection and the final one will be an empty iterable collection, with the intervening values the results of successive applications of tail.

Selects first n elements.

Note: might return different results for different runs, unless the underlying collection type is ordered.

A collection containing the last n elements of this collection.

Note: Even when applied to a view or a lazy collection it will always force the elements.

Takes longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Given a collection factory factory, convert this collection to the appropriate representation for the current element type A. Example uses:

xs.to(List) xs.to(ArrayBuffer) xs.to(BitSet) // for xs: Iterable[Int]

Convert collection to array.

Converts this view to a string.

Transposes this iterable collection of iterable collections into a iterable collection of iterable collections.

The resulting collection's type will be guided by the static type of iterable collection. For example:

val xs = List(
           Set(1, 2, 3),
           Set(4, 5, 6)).transpose
// xs == List(
//         List(1, 4),
//         List(2, 5),
//         List(3, 6))

val ys = Vector(
           List(1, 2, 3),
           List(4, 5, 6)).transpose
// ys == Vector(
//         Vector(1, 4),
//         Vector(2, 5),
//         Vector(3, 6))

Note: Even when applied to a view or a lazy collection it will always force the elements.

Converts this iterable collection of pairs into two collections of the first and second half of each pair.

val xs = Iterable(
           (1, "one"),
           (2, "two"),
           (3, "three")).unzip
// xs == (Iterable(1, 2, 3),
//        Iterable(one, two, three))

Converts this iterable collection of triples into three collections of the first, second, and third element of each triple.

val xs = Iterable(
           (1, "one", '1'),
           (2, "two", '2'),
           (3, "three", '3')).unzip3
// xs == (Iterable(1, 2, 3),
//        Iterable(one, two, three),
//        Iterable(1, 2, 3))

A view over the elements of this collection.

Creates a non-strict filter of this iterable collection.

Note: the difference between c filter p and c withFilter p is that the former creates a new collection, whereas the latter only restricts the domain of subsequent map, flatMap, foreach, and withFilter operations.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Create a proxy for Java serialization. The default implementation will serialize all elements and deserialize by using a builder for CC via iterableFactory. Override in subclasses if more data needs to be preserved or a more efficient implementation is available. Override to return this in order to use self-serialization instead of a proxy.

Returns a iterable collection formed from this iterable collection and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.

Returns a iterable collection formed from this iterable collection and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.

Zips this iterable collection with its indices.

Folds the elements of this $coll using the specified associative binary operator. The default implementation in IterableOnce is equivalent to foldLeft but may be overridden for more efficient traversal orders.

$undefinedorder $willNotTerminateInf

Tests whether this $coll is known to have a finite size. All strict collections are known to have finite size. For a non-strict collection such as Stream, the predicate returns true if all elements have been computed. It returns false if the stream is not yet evaluated to the end. Non-empty Iterators usually return false even if they were created from a collection with a known finite size.

Note: many collection methods will not work on collections of infinite sizes. The typical failure mode is an infinite loop. These methods always attempt a traversal without checking first that hasDefiniteSize returns true. However, checking hasDefiniteSize can provide an assurance that size is well-defined and non-termination is not a concern.

Computes a prefix scan of the elements of the collection.

Note: The neutral element z may be applied more than once.