redis.clients.jedis

Class BinaryJedis

java.lang.Object

redis.clients.jedis.BinaryJedis

All Implemented Interfaces:

Closeable, AutoCloseable, AdvancedBinaryJedisCommands, BasicCommands, BinaryJedisCommands, BinaryScriptingCommands, MultiKeyBinaryCommands

Direct Known Subclasses:

Jedis

public class BinaryJedis
extends Object
implements BasicCommands, BinaryJedisCommands, MultiKeyBinaryCommands, AdvancedBinaryJedisCommands, BinaryScriptingCommands, Closeable

Field Summary

Fields

Modifier and Type	Field and Description
protected Client	client

Constructor Summary

Constructors

Constructor and Description
BinaryJedis(JedisShardInfo shardInfo)
BinaryJedis(String host)
BinaryJedis(String host, int port)
BinaryJedis(String host, int port, int timeout)
BinaryJedis(URI uri)
BinaryJedis(URI uri, int timeout)

Method Summary

Methods

Modifier and Type	Method and Description
Long	append(byte[] key, byte[] value) If the key already exists and is a string, this command appends the provided value at the end of the string.
String	auth(String password) Request for authentication in a password protected Redis server.
String	bgrewriteaof() Rewrite the append only file in background when it gets too big.
String	bgsave() Asynchronously save the DB on disk.
Long	bitcount(byte[] key)
Long	bitcount(byte[] key, long start, long end)
Long	bitop(BitOP op, byte[] destKey, byte[]... srcKeys)
Long	bitpos(byte[] key, boolean value)
Long	bitpos(byte[] key, boolean value, BitPosParams params)
List<byte[]>	blpop(byte[]... args)
List<byte[]>	blpop(byte[] arg) Deprecated. unusable command, this command will be removed in 3.0.0.
List<byte[]>	blpop(int timeout, byte[]... keys) BLPOP (and BRPOP) is a blocking list pop primitive.
List<byte[]>	brpop(byte[]... args)
List<byte[]>	brpop(byte[] arg) Deprecated. unusable command, this command will be removed in 3.0.0.
List<byte[]>	brpop(int timeout, byte[]... keys) BLPOP (and BRPOP) is a blocking list pop primitive.
byte[]	brpoplpush(byte[] source, byte[] destination, int timeout) Pop a value from a list, push it to another list and return it; or block until one is available
protected void	checkIsInMulti()
String	clientGetname()
String	clientKill(byte[] client)
String	clientList()
String	clientSetname(byte[] name)
void	close()
List<byte[]>	configGet(byte[] pattern) Retrieve the configuration of a running Redis server.
String	configResetStat() Reset the stats returned by INFO
byte[]	configSet(byte[] parameter, byte[] value) Alter the configuration of a running Redis server.
void	connect()
Long	dbSize() Return the number of keys in the currently selected database.
String	debug(DebugParams params)
Long	decr(byte[] key) Decrement the number stored at key by one.
Long	decrBy(byte[] key, long integer) DECRBY work just like INCR but instead to decrement by 1 the decrement is integer.
Long	del(byte[]... keys) Remove the specified keys.
Long	del(byte[] key)
void	disconnect()
byte[]	dump(byte[] key)
byte[]	echo(byte[] string)
Object	eval(byte[] script)
Object	eval(byte[] script, byte[] keyCount, byte[]... params)
Object	eval(byte[] script, int keyCount, byte[]... params)
Object	eval(byte[] script, List<byte[]> keys, List<byte[]> args) Evaluates scripts using the Lua interpreter built into Redis starting from version 2.6.0.
Object	evalsha(byte[] sha1)
Object	evalsha(byte[] sha1, int keyCount, byte[]... params)
Object	evalsha(byte[] sha1, List<byte[]> keys, List<byte[]> args)
Boolean	exists(byte[] key) Test if the specified key exists.
Long	expire(byte[] key, int seconds) Set a timeout on the specified key.
Long	expireAt(byte[] key, long unixTime) EXPIREAT works exctly like EXPIRE but instead to get the number of seconds representing the Time To Live of the key as a second argument (that is a relative way of specifing the TTL), it takes an absolute one in the form of a UNIX timestamp (Number of seconds elapsed since 1 Gen 1970).
String	flushAll() Delete all the keys of all the existing databases, not just the currently selected one.
String	flushDB() Delete all the keys of the currently selected DB.
byte[]	get(byte[] key) Get the value of the specified key.
Boolean	getbit(byte[] key, long offset) Returns the bit value at offset in the string value stored at key
Client	getClient()
Long	getDB()
byte[]	getrange(byte[] key, long startOffset, long endOffset)
byte[]	getSet(byte[] key, byte[] value) GETSET is an atomic set this value and return the old value command.
Long	hdel(byte[] key, byte[]... fields) Remove the specified field from an hash stored at key.
Boolean	hexists(byte[] key, byte[] field) Test for existence of a specified field in a hash.
byte[]	hget(byte[] key, byte[] field) If key holds a hash, retrieve the value associated to the specified field.
Map<byte[],byte[]>	hgetAll(byte[] key) Return all the fields and associated values in a hash.
Long	hincrBy(byte[] key, byte[] field, long value) Increment the number stored at field in the hash at key by value.
Double	hincrByFloat(byte[] key, byte[] field, double value) Increment the number stored at field in the hash at key by a double precision floating point value.
Set<byte[]>	hkeys(byte[] key) Return all the fields in a hash.
Long	hlen(byte[] key) Return the number of items in a hash.
List<byte[]>	hmget(byte[] key, byte[]... fields) Retrieve the values associated to the specified fields.
String	hmset(byte[] key, Map<byte[],byte[]> hash) Set the respective fields to the respective values.
ScanResult<Map.Entry<byte[],byte[]>>	hscan(byte[] key, byte[] cursor)
ScanResult<Map.Entry<byte[],byte[]>>	hscan(byte[] key, byte[] cursor, ScanParams params)
Long	hset(byte[] key, byte[] field, byte[] value) Set the specified hash field to the specified value.
Long	hsetnx(byte[] key, byte[] field, byte[] value) Set the specified hash field to the specified value if the field not exists.
List<byte[]>	hvals(byte[] key) Return all the values in a hash.
Long	incr(byte[] key) Increment the number stored at key by one.
Long	incrBy(byte[] key, long integer) INCRBY work just like INCR but instead to increment by 1 the increment is integer.
Double	incrByFloat(byte[] key, double integer) INCRBYFLOAT work just like incrBy(byte[], long) INCRBY} but increments by floats instead of integers.
String	info() Provide information and statistics about the server.
String	info(String section)
boolean	isConnected()
Set<byte[]>	keys(byte[] pattern) Returns all the keys matching the glob-style pattern as space separated strings.
Long	lastsave() Return the UNIX time stamp of the last successfully saving of the dataset on disk.
byte[]	lindex(byte[] key, long index) Return the specified element of the list stored at the specified key.
Long	linsert(byte[] key, BinaryClient.LIST_POSITION where, byte[] pivot, byte[] value)
Long	llen(byte[] key) Return the length of the list stored at the specified key.
byte[]	lpop(byte[] key) Atomically return and remove the first (LPOP) or last (RPOP) element of the list.
Long	lpush(byte[] key, byte[]... strings) Add the string value to the head (LPUSH) or tail (RPUSH) of the list stored at key.
Long	lpushx(byte[] key, byte[]... string)
List<byte[]>	lrange(byte[] key, long start, long end) Return the specified elements of the list stored at the specified key.
Long	lrem(byte[] key, long count, byte[] value) Remove the first count occurrences of the value element from the list.
String	lset(byte[] key, long index, byte[] value) Set a new value as the element at index position of the List at key.
String	ltrim(byte[] key, long start, long end) Trim an existing list so that it will contain only the specified range of elements specified.
List<byte[]>	mget(byte[]... keys) Get the values of all the specified keys.
String	migrate(byte[] host, int port, byte[] key, int destinationDb, int timeout)
void	monitor(JedisMonitor jedisMonitor) Dump all the received requests in real time.
Long	move(byte[] key, int dbIndex) Move the specified key from the currently selected DB to the specified destination DB.
String	mset(byte[]... keysvalues) Set the the respective keys to the respective values.
Long	msetnx(byte[]... keysvalues) Set the the respective keys to the respective values.
Transaction	multi()
List<Object>	multi(TransactionBlock jedisTransaction) Deprecated.
byte[]	objectEncoding(byte[] key)
Long	objectIdletime(byte[] key)
Long	objectRefcount(byte[] key)
Long	persist(byte[] key) Undo a expire at turning the expire key into a normal key.
Long	pexpire(byte[] key, int milliseconds) Deprecated.
Long	pexpire(byte[] key, long milliseconds)
Long	pexpireAt(byte[] key, long millisecondsTimestamp)
Long	pfadd(byte[] key, byte[]... elements)
Long	pfcount(byte[]... keys)
long	pfcount(byte[] key)
String	pfmerge(byte[] destkey, byte[]... sourcekeys)
String	ping()
Pipeline	pipelined()
List<Object>	pipelined(PipelineBlock jedisPipeline) Deprecated.
String	psetex(byte[] key, int milliseconds, byte[] value)
void	psubscribe(BinaryJedisPubSub jedisPubSub, byte[]... patterns)
Long	pttl(byte[] key)
Long	publish(byte[] channel, byte[] message)
String	quit() Ask the server to silently close the connection.
byte[]	randomBinaryKey() Return a randomly selected key from the currently selected DB.
String	rename(byte[] oldkey, byte[] newkey) Atomically renames the key oldkey to newkey.
Long	renamenx(byte[] oldkey, byte[] newkey) Rename oldkey into newkey but fails if the destination key newkey already exists.
void	resetState()
String	restore(byte[] key, int ttl, byte[] serializedValue)
byte[]	rpop(byte[] key) Atomically return and remove the first (LPOP) or last (RPOP) element of the list.
byte[]	rpoplpush(byte[] srckey, byte[] dstkey) Atomically return and remove the last (tail) element of the srckey list, and push the element as the first (head) element of the dstkey list.
Long	rpush(byte[] key, byte[]... strings) Add the string value to the head (LPUSH) or tail (RPUSH) of the list stored at key.
Long	rpushx(byte[] key, byte[]... string)
Long	sadd(byte[] key, byte[]... members) Add the specified member to the set value stored at key.
String	save() Synchronously save the DB on disk.
ScanResult<byte[]>	scan(byte[] cursor)
ScanResult<byte[]>	scan(byte[] cursor, ScanParams params)
Long	scard(byte[] key) Return the set cardinality (number of elements).
List<Long>	scriptExists(byte[]... sha1)
String	scriptFlush()
String	scriptKill()
byte[]	scriptLoad(byte[] script)
Set<byte[]>	sdiff(byte[]... keys) Return the difference between the Set stored at key1 and all the Sets key2, ..., keyN
Long	sdiffstore(byte[] dstkey, byte[]... keys) This command works exactly like SDIFF but instead of being returned the resulting set is stored in dstkey.
String	select(int index) Select the DB with having the specified zero-based numeric index.
String	set(byte[] key, byte[] value) Set the string value as value of the key.
String	set(byte[] key, byte[] value, byte[] nxxx)
String	set(byte[] key, byte[] value, byte[] nxxx, byte[] expx, int time)
String	set(byte[] key, byte[] value, byte[] nxxx, byte[] expx, long time) Set the string value as value of the key.
Boolean	setbit(byte[] key, long offset, boolean value) Sets or clears the bit at offset in the string value stored at key
Boolean	setbit(byte[] key, long offset, byte[] value)
String	setex(byte[] key, int seconds, byte[] value) The command is exactly equivalent to the following group of commands: SET + EXPIRE.
Long	setnx(byte[] key, byte[] value) SETNX works exactly like SET with the only difference that if the key already exists no operation is performed.
Long	setrange(byte[] key, long offset, byte[] value)
String	shutdown() Synchronously save the DB on disk, then shutdown the server.
Set<byte[]>	sinter(byte[]... keys) Return the members of a set resulting from the intersection of all the sets hold at the specified keys.
Long	sinterstore(byte[] dstkey, byte[]... keys) This commnad works exactly like SINTER but instead of being returned the resulting set is sotred as dstkey.
Boolean	sismember(byte[] key, byte[] member) Return 1 if member is a member of the set stored at key, otherwise 0 is returned.
String	slaveof(String host, int port) Change the replication settings.
String	slaveofNoOne()
List<byte[]>	slowlogGetBinary()
List<byte[]>	slowlogGetBinary(long entries)
Long	slowlogLen()
String	slowlogReset()
Set<byte[]>	smembers(byte[] key) Return all the members (elements) of the set value stored at key.
Long	smove(byte[] srckey, byte[] dstkey, byte[] member) Move the specified member from the set at srckey to the set at dstkey.
List<byte[]>	sort(byte[] key) Sort a Set or a List.
Long	sort(byte[] key, byte[] dstkey) Sort a Set or a List and Store the Result at dstkey.
List<byte[]>	sort(byte[] key, SortingParams sortingParameters) Sort a Set or a List accordingly to the specified parameters.
Long	sort(byte[] key, SortingParams sortingParameters, byte[] dstkey) Sort a Set or a List accordingly to the specified parameters and store the result at dstkey.
byte[]	spop(byte[] key) Remove a random element from a Set returning it as return value.
byte[]	srandmember(byte[] key) Return a random element from a Set, without removing the element.
List<byte[]>	srandmember(byte[] key, int count)
Long	srem(byte[] key, byte[]... member) Remove the specified member from the set value stored at key.
ScanResult<byte[]>	sscan(byte[] key, byte[] cursor)
ScanResult<byte[]>	sscan(byte[] key, byte[] cursor, ScanParams params)
Long	strlen(byte[] key)
void	subscribe(BinaryJedisPubSub jedisPubSub, byte[]... channels)
byte[]	substr(byte[] key, int start, int end) Return a subset of the string from offset start to offset end (both offsets are inclusive).
Set<byte[]>	sunion(byte[]... keys) Return the members of a set resulting from the union of all the sets hold at the specified keys.
Long	sunionstore(byte[] dstkey, byte[]... keys) This command works exactly like SUNION but instead of being returned the resulting set is stored as dstkey.
void	sync()
List<String>	time()
Long	ttl(byte[] key) The TTL command returns the remaining time to live in seconds of a key that has an EXPIRE set.
String	type(byte[] key) Return the type of the value stored at key in form of a string.
String	unwatch()
Long	waitReplicas(int replicas, long timeout) Syncrhonous replication of Redis as described here: http://antirez.com/news/66 Since Java Object class has implemented "wait" method, we cannot use it, so I had to change the name of the method.
String	watch(byte[]... keys)
Long	zadd(byte[] key, double score, byte[] member) Add the specified member having the specifeid score to the sorted set stored at key.
Long	zadd(byte[] key, Map<byte[],Double> scoreMembers)
Long	zcard(byte[] key) Return the sorted set cardinality (number of elements).
Long	zcount(byte[] key, byte[] min, byte[] max)
Long	zcount(byte[] key, double min, double max)
Double	zincrby(byte[] key, double score, byte[] member) If member already exists in the sorted set adds the increment to its score and updates the position of the element in the sorted set accordingly.
Long	zinterstore(byte[] dstkey, byte[]... sets) Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at dstkey.
Long	zinterstore(byte[] dstkey, ZParams params, byte[]... sets) Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at dstkey.
Long	zlexcount(byte[] key, byte[] min, byte[] max)
Set<byte[]>	zrange(byte[] key, long start, long end)
Set<byte[]>	zrangeByLex(byte[] key, byte[] min, byte[] max)
Set<byte[]>	zrangeByLex(byte[] key, byte[] min, byte[] max, int offset, int count)
Set<byte[]>	zrangeByScore(byte[] key, byte[] min, byte[] max)
Set<byte[]>	zrangeByScore(byte[] key, byte[] min, byte[] max, int offset, int count)
Set<byte[]>	zrangeByScore(byte[] key, double min, double max) Return the all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max).
Set<byte[]>	zrangeByScore(byte[] key, double min, double max, int offset, int count) Return the all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max).
Set<Tuple>	zrangeByScoreWithScores(byte[] key, byte[] min, byte[] max)
Set<Tuple>	zrangeByScoreWithScores(byte[] key, byte[] min, byte[] max, int offset, int count)
Set<Tuple>	zrangeByScoreWithScores(byte[] key, double min, double max) Return the all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max).
Set<Tuple>	zrangeByScoreWithScores(byte[] key, double min, double max, int offset, int count) Return the all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max).
Set<Tuple>	zrangeWithScores(byte[] key, long start, long end)
Long	zrank(byte[] key, byte[] member) Return the rank (or index) or member in the sorted set at key, with scores being ordered from low to high.
Long	zrem(byte[] key, byte[]... members) Remove the specified member from the sorted set value stored at key.
Long	zremrangeByLex(byte[] key, byte[] min, byte[] max)
Long	zremrangeByRank(byte[] key, long start, long end) Remove all elements in the sorted set at key with rank between start and end.
Long	zremrangeByScore(byte[] key, byte[] start, byte[] end)
Long	zremrangeByScore(byte[] key, double start, double end) Remove all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max).
Set<byte[]>	zrevrange(byte[] key, long start, long end)
Set<byte[]>	zrevrangeByScore(byte[] key, byte[] max, byte[] min)
Set<byte[]>	zrevrangeByScore(byte[] key, byte[] max, byte[] min, int offset, int count)
Set<byte[]>	zrevrangeByScore(byte[] key, double max, double min)
Set<byte[]>	zrevrangeByScore(byte[] key, double max, double min, int offset, int count)
Set<Tuple>	zrevrangeByScoreWithScores(byte[] key, byte[] max, byte[] min)
Set<Tuple>	zrevrangeByScoreWithScores(byte[] key, byte[] max, byte[] min, int offset, int count)
Set<Tuple>	zrevrangeByScoreWithScores(byte[] key, double max, double min)
Set<Tuple>	zrevrangeByScoreWithScores(byte[] key, double max, double min, int offset, int count)
Set<Tuple>	zrevrangeWithScores(byte[] key, long start, long end)
Long	zrevrank(byte[] key, byte[] member) Return the rank (or index) or member in the sorted set at key, with scores being ordered from high to low.
ScanResult<Tuple>	zscan(byte[] key, byte[] cursor)
ScanResult<Tuple>	zscan(byte[] key, byte[] cursor, ScanParams params)
Double	zscore(byte[] key, byte[] member) Return the score of the specified element of the sorted set at key.
Long	zunionstore(byte[] dstkey, byte[]... sets) Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at dstkey.
Long	zunionstore(byte[] dstkey, ZParams params, byte[]... sets) Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at dstkey.

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

client

protected Client client

Constructor Detail

BinaryJedis

public BinaryJedis(String host)

BinaryJedis

public BinaryJedis(String host,
           int port)

BinaryJedis

public BinaryJedis(String host,
           int port,
           int timeout)

BinaryJedis

public BinaryJedis(JedisShardInfo shardInfo)

BinaryJedis

public BinaryJedis(URI uri)

BinaryJedis

public BinaryJedis(URI uri,
           int timeout)

Method Detail

ping

public String ping()

Specified by:

ping in interface BasicCommands

set

public String set(byte[] key,
         byte[] value)

Set the string value as value of the key. The string can't be longer than 1073741824 bytes (1 GB).

Time complexity: O(1)

Specified by:

set in interface BinaryJedisCommands

Parameters:

key -

value -

Returns:

Status code reply

set

public String set(byte[] key,
         byte[] value,
         byte[] nxxx,
         byte[] expx,
         long time)

Set the string value as value of the key. The string can't be longer than 1073741824 bytes (1 GB).

Parameters:

key -

value -

nxxx - NX|XX, NX -- Only set the key if it does not already exist. XX -- Only set the key if it already exist.

expx - EX|PX, expire time units: EX = seconds; PX = milliseconds

time - expire time in the units of

Returns:

Status code reply

get

public byte[] get(byte[] key)

Get the value of the specified key. If the key does not exist the special value 'nil' is returned. If the value stored at key is not a string an error is returned because GET can only handle string values.

Time complexity: O(1)

Specified by:

get in interface BinaryJedisCommands

Parameters:

key -

Returns:

Bulk reply

quit

public String quit()

Ask the server to silently close the connection.

Specified by:

quit in interface BasicCommands

exists

public Boolean exists(byte[] key)

Test if the specified key exists. The command returns "1" if the key exists, otherwise "0" is returned. Note that even keys set with an empty string as value will return "1". Time complexity: O(1)

Specified by:

exists in interface BinaryJedisCommands

Parameters:

key -

Returns:

Integer reply, "1" if the key exists, otherwise "0"

del

public Long del(byte[]... keys)

Remove the specified keys. If a given key does not exist no operation is performed for this key. The command returns the number of keys removed. Time complexity: O(1)

Specified by:

del in interface MultiKeyBinaryCommands

Parameters:

keys -

Returns:

Integer reply, specifically: an integer greater than 0 if one or more keys were removed 0 if none of the specified key existed

del

public Long del(byte[] key)

Specified by:

del in interface BinaryJedisCommands

type

public String type(byte[] key)

Return the type of the value stored at key in form of a string. The type can be one of "none", "string", "list", "set". "none" is returned if the key does not exist. Time complexity: O(1)

Specified by:

type in interface BinaryJedisCommands

Parameters:

key -

Returns:

Status code reply, specifically: "none" if the key does not exist "string" if the key contains a String value "list" if the key contains a List value "set" if the key contains a Set value "zset" if the key contains a Sorted Set value "hash" if the key contains a Hash value

flushDB

public String flushDB()

Delete all the keys of the currently selected DB. This command never fails.

Specified by:

flushDB in interface BasicCommands

Returns:

Status code reply

keys

public Set<byte[]> keys(byte[] pattern)

Returns all the keys matching the glob-style pattern as space separated strings. For example if you have in the database the keys "foo" and "foobar" the command "KEYS foo*" will return "foo foobar".

Note that while the time complexity for this operation is O(n) the constant times are pretty low. For example Redis running on an entry level laptop can scan a 1 million keys database in 40 milliseconds. Still it's better to consider this one of the slow commands that may ruin the DB performance if not used with care.

In other words this command is intended only for debugging and special operations like creating a script to change the DB schema. Don't use it in your normal code. Use Redis Sets in order to group together a subset of objects.

Glob style patterns examples:

• h?llo will match hello hallo hhllo
• h*llo will match hllo heeeello
• h[ae]llo will match hello and hallo, but not hillo

Use \ to escape special chars if you want to match them verbatim.

Time complexity: O(n) (with n being the number of keys in the DB, and assuming keys and pattern of limited length)

Specified by:

keys in interface MultiKeyBinaryCommands

Parameters:

pattern -

Returns:

Multi bulk reply

randomBinaryKey

public byte[] randomBinaryKey()

Return a randomly selected key from the currently selected DB.

Time complexity: O(1)

Specified by:

randomBinaryKey in interface MultiKeyBinaryCommands

Returns:

Singe line reply, specifically the randomly selected key or an empty string is the database is empty

rename

public String rename(byte[] oldkey,
            byte[] newkey)

Atomically renames the key oldkey to newkey. If the source and destination name are the same an error is returned. If newkey already exists it is overwritten.

Time complexity: O(1)

Specified by:

rename in interface MultiKeyBinaryCommands

Parameters:

oldkey -

newkey -

Returns:

Status code repy

renamenx

public Long renamenx(byte[] oldkey,
            byte[] newkey)

Rename oldkey into newkey but fails if the destination key newkey already exists.

Time complexity: O(1)

Specified by:

renamenx in interface MultiKeyBinaryCommands

Parameters:

oldkey -

newkey -

Returns:

Integer reply, specifically: 1 if the key was renamed 0 if the target key already exist

dbSize

public Long dbSize()

Return the number of keys in the currently selected database.

Specified by:

dbSize in interface BasicCommands

Returns:

Integer reply

expire

public Long expire(byte[] key,
          int seconds)

Set a timeout on the specified key. After the timeout the key will be automatically deleted by the server. A key with an associated timeout is said to be volatile in Redis terminology.

Voltile keys are stored on disk like the other keys, the timeout is persistent too like all the other aspects of the dataset. Saving a dataset containing expires and stopping the server does not stop the flow of time as Redis stores on disk the time when the key will no longer be available as Unix time, and not the remaining seconds.

Since Redis 2.1.3 you can update the value of the timeout of a key already having an expire set. It is also possible to undo the expire at all turning the key into a normal key using the PERSIST command.

Time complexity: O(1)

Specified by:

expire in interface BinaryJedisCommands

Parameters:

key -

seconds -

Returns:

Integer reply, specifically: 1: the timeout was set. 0: the timeout was not set since the key already has an associated timeout (this may happen only in Redis versions < 2.1.3, Redis >= 2.1.3 will happily update the timeout), or the key does not exist.

See Also:

ExpireCommand

expireAt

public Long expireAt(byte[] key,
            long unixTime)

EXPIREAT works exctly like EXPIRE but instead to get the number of seconds representing the Time To Live of the key as a second argument (that is a relative way of specifing the TTL), it takes an absolute one in the form of a UNIX timestamp (Number of seconds elapsed since 1 Gen 1970).

EXPIREAT was introduced in order to implement the Append Only File persistence mode so that EXPIRE commands are automatically translated into EXPIREAT commands for the append only file. Of course EXPIREAT can also used by programmers that need a way to simply specify that a given key should expire at a given time in the future.

Since Redis 2.1.3 you can update the value of the timeout of a key already having an expire set. It is also possible to undo the expire at all turning the key into a normal key using the PERSIST command.

Time complexity: O(1)

Specified by:

expireAt in interface BinaryJedisCommands

Parameters:

key -

unixTime -

Returns:

Integer reply, specifically: 1: the timeout was set. 0: the timeout was not set since the key already has an associated timeout (this may happen only in Redis versions < 2.1.3, Redis >= 2.1.3 will happily update the timeout), or the key does not exist.

See Also:

ExpireCommand

ttl

public Long ttl(byte[] key)

The TTL command returns the remaining time to live in seconds of a key that has an EXPIRE set. This introspection capability allows a Redis client to check how many seconds a given key will continue to be part of the dataset.

Specified by:

ttl in interface BinaryJedisCommands

Parameters:

key -

Returns:

Integer reply, returns the remaining time to live in seconds of a key that has an EXPIRE. If the Key does not exists or does not have an associated expire, -1 is returned.

select

public String select(int index)

Select the DB with having the specified zero-based numeric index. For default every new client connection is automatically selected to DB 0.

Specified by:

select in interface BasicCommands

Parameters:

index -

Returns:

Status code reply

move

public Long move(byte[] key,
        int dbIndex)

Move the specified key from the currently selected DB to the specified destination DB. Note that this command returns 1 only if the key was successfully moved, and 0 if the target key was already there or if the source key was not found at all, so it is possible to use MOVE as a locking primitive.

Specified by:

move in interface BinaryJedisCommands

Parameters:

key -

dbIndex -

Returns:

Integer reply, specifically: 1 if the key was moved 0 if the key was not moved because already present on the target DB or was not found in the current DB.

flushAll

public String flushAll()

Delete all the keys of all the existing databases, not just the currently selected one. This command never fails.

Specified by:

flushAll in interface BasicCommands

Returns:

Status code reply

getSet

public byte[] getSet(byte[] key,
            byte[] value)

GETSET is an atomic set this value and return the old value command. Set key to the string value and return the old value stored at key. The string can't be longer than 1073741824 bytes (1 GB).

Time complexity: O(1)

Specified by:

getSet in interface BinaryJedisCommands

Parameters:

key -

value -

Returns:

Bulk reply

mget

public List<byte[]> mget(byte[]... keys)

Get the values of all the specified keys. If one or more keys dont exist or is not of type String, a 'nil' value is returned instead of the value of the specified key, but the operation never fails.

Time complexity: O(1) for every key

Specified by:

mget in interface MultiKeyBinaryCommands

Parameters:

keys -

Returns:

Multi bulk reply

setnx

public Long setnx(byte[] key,
         byte[] value)

SETNX works exactly like SET with the only difference that if the key already exists no operation is performed. SETNX actually means "SET if Not eXists".

Time complexity: O(1)

Specified by:

setnx in interface BinaryJedisCommands

Parameters:

key -

value -

Returns:

Integer reply, specifically: 1 if the key was set 0 if the key was not set

setex

public String setex(byte[] key,
           int seconds,
           byte[] value)

The command is exactly equivalent to the following group of commands: SET + EXPIRE. The operation is atomic.

Time complexity: O(1)

Specified by:

setex in interface BinaryJedisCommands

Parameters:

key -

seconds -

value -

Returns:

Status code reply

mset

public String mset(byte[]... keysvalues)

Set the the respective keys to the respective values. MSET will replace old values with new values, while MSETNX will not perform any operation at all even if just a single key already exists.

Because of this semantic MSETNX can be used in order to set different keys representing different fields of an unique logic object in a way that ensures that either all the fields or none at all are set.

Both MSET and MSETNX are atomic operations. This means that for instance if the keys A and B are modified, another client talking to Redis can either see the changes to both A and B at once, or no modification at all.

Specified by:

mset in interface MultiKeyBinaryCommands

Parameters:

keysvalues -

Returns:

Status code reply Basically +OK as MSET can't fail

See Also:

#msetnx(byte[]...)

msetnx

public Long msetnx(byte[]... keysvalues)

Set the the respective keys to the respective values. MSET will replace old values with new values, while MSETNX will not perform any operation at all even if just a single key already exists.

Because of this semantic MSETNX can be used in order to set different keys representing different fields of an unique logic object in a way that ensures that either all the fields or none at all are set.

Both MSET and MSETNX are atomic operations. This means that for instance if the keys A and B are modified, another client talking to Redis can either see the changes to both A and B at once, or no modification at all.

Specified by:

msetnx in interface MultiKeyBinaryCommands

Parameters:

keysvalues -

Returns:

Integer reply, specifically: 1 if the all the keys were set 0 if no key was set (at least one key already existed)

See Also:

#mset(byte[]...)

decrBy

public Long decrBy(byte[] key,
          long integer)

DECRBY work just like INCR but instead to decrement by 1 the decrement is integer.

INCR commands are limited to 64 bit signed integers.

Note: this is actually a string operation, that is, in Redis there are not "integer" types. Simply the string stored at the key is parsed as a base 10 64 bit signed integer, incremented, and then converted back as a string.

Time complexity: O(1)

Specified by:

decrBy in interface BinaryJedisCommands

Parameters:

key -

integer -

Returns:

Integer reply, this commands will reply with the new value of key after the increment.

See Also:

incr(byte[]), decr(byte[]), incrBy(byte[], long)

decr

public Long decr(byte[] key)

Decrement the number stored at key by one. If the key does not exist or contains a value of a wrong type, set the key to the value of "0" before to perform the decrement operation.

INCR commands are limited to 64 bit signed integers.

Note: this is actually a string operation, that is, in Redis there are not "integer" types. Simply the string stored at the key is parsed as a base 10 64 bit signed integer, incremented, and then converted back as a string.

Time complexity: O(1)

Specified by:

decr in interface BinaryJedisCommands

Parameters:

key -

Returns:

Integer reply, this commands will reply with the new value of key after the increment.

See Also:

incr(byte[]), incrBy(byte[], long), decrBy(byte[], long)

incrBy

public Long incrBy(byte[] key,
          long integer)

INCRBY work just like INCR but instead to increment by 1 the increment is integer.

INCR commands are limited to 64 bit signed integers.

Note: this is actually a string operation, that is, in Redis there are not "integer" types. Simply the string stored at the key is parsed as a base 10 64 bit signed integer, incremented, and then converted back as a string.

Time complexity: O(1)

Specified by:

incrBy in interface BinaryJedisCommands

Parameters:

key -

integer -

Returns:

Integer reply, this commands will reply with the new value of key after the increment.

See Also:

incr(byte[]), decr(byte[]), decrBy(byte[], long)

incrByFloat

public Double incrByFloat(byte[] key,
                 double integer)

INCRBYFLOAT work just like incrBy(byte[], long) INCRBY} but increments by floats instead of integers.

INCRBYFLOAT commands are limited to double precision floating point values.

Note: this is actually a string operation, that is, in Redis there are not "double" types. Simply the string stored at the key is parsed as a base double precision floating point value, incremented, and then converted back as a string. There is no DECRYBYFLOAT but providing a negative value will work as expected.

Time complexity: O(1)

Specified by:

incrByFloat in interface BinaryJedisCommands

Parameters:

key - the key to increment

integer - the value to increment by

Returns:

Integer reply, this commands will reply with the new value of key after the increment.

See Also:

incr(byte[]), decr(byte[]), decrBy(byte[], long)

incr

public Long incr(byte[] key)

Increment the number stored at key by one. If the key does not exist or contains a value of a wrong type, set the key to the value of "0" before to perform the increment operation.

INCR commands are limited to 64 bit signed integers.

Note: this is actually a string operation, that is, in Redis there are not "integer" types. Simply the string stored at the key is parsed as a base 10 64 bit signed integer, incremented, and then converted back as a string.

Time complexity: O(1)

Specified by:

incr in interface BinaryJedisCommands

Parameters:

key -

Returns:

Integer reply, this commands will reply with the new value of key after the increment.

See Also:

incrBy(byte[], long), decr(byte[]), decrBy(byte[], long)

append

public Long append(byte[] key,
          byte[] value)

If the key already exists and is a string, this command appends the provided value at the end of the string. If the key does not exist it is created and set as an empty string, so APPEND will be very similar to SET in this special case.

Time complexity: O(1). The amortized time complexity is O(1) assuming the appended value is small and the already present value is of any size, since the dynamic string library used by Redis will double the free space available on every reallocation.

Specified by:

append in interface BinaryJedisCommands

Parameters:

key -

value -

Returns:

Integer reply, specifically the total length of the string after the append operation.

substr

public byte[] substr(byte[] key,
            int start,
            int end)

Return a subset of the string from offset start to offset end (both offsets are inclusive). Negative offsets can be used in order to provide an offset starting from the end of the string. So -1 means the last char, -2 the penultimate and so forth.

The function handles out of range requests without raising an error, but just limiting the resulting range to the actual length of the string.

Time complexity: O(start+n) (with start being the start index and n the total length of the requested range). Note that the lookup part of this command is O(1) so for small strings this is actually an O(1) command.

Specified by:

substr in interface BinaryJedisCommands

Parameters:

key -

start -

end -

Returns:

Bulk reply

hset

public Long hset(byte[] key,
        byte[] field,
        byte[] value)

Set the specified hash field to the specified value.

If key does not exist, a new key holding a hash is created.

Time complexity: O(1)

Specified by:

hset in interface BinaryJedisCommands

Parameters:

key -

field -

value -

Returns:

If the field already exists, and the HSET just produced an update of the value, 0 is returned, otherwise if a new field is created 1 is returned.

hget

public byte[] hget(byte[] key,
          byte[] field)

If key holds a hash, retrieve the value associated to the specified field.

If the field is not found or the key does not exist, a special 'nil' value is returned.

Time complexity: O(1)

Specified by:

hget in interface BinaryJedisCommands

Parameters:

key -

field -

Returns:

Bulk reply

hsetnx

public Long hsetnx(byte[] key,
          byte[] field,
          byte[] value)

Set the specified hash field to the specified value if the field not exists. Time complexity: O(1)

Specified by:

hsetnx in interface BinaryJedisCommands

Parameters:

key -

field -

value -

Returns:

If the field already exists, 0 is returned, otherwise if a new field is created 1 is returned.

hmset

public String hmset(byte[] key,
           Map<byte[],byte[]> hash)

Set the respective fields to the respective values. HMSET replaces old values with new values.

If key does not exist, a new key holding a hash is created.

Time complexity: O(N) (with N being the number of fields)

Specified by:

hmset in interface BinaryJedisCommands

Parameters:

key -

hash -

Returns:

Always OK because HMSET can't fail

hmget

public List<byte[]> hmget(byte[] key,
                 byte[]... fields)

Retrieve the values associated to the specified fields.

If some of the specified fields do not exist, nil values are returned. Non existing keys are considered like empty hashes.

Time complexity: O(N) (with N being the number of fields)

Specified by:

hmget in interface BinaryJedisCommands

Parameters:

key -

fields -

Returns:

Multi Bulk Reply specifically a list of all the values associated with the specified fields, in the same order of the request.

hincrBy

public Long hincrBy(byte[] key,
           byte[] field,
           long value)

Increment the number stored at field in the hash at key by value. If key does not exist, a new key holding a hash is created. If field does not exist or holds a string, the value is set to 0 before applying the operation. Since the value argument is signed you can use this command to perform both increments and decrements.

The range of values supported by HINCRBY is limited to 64 bit signed integers.

Time complexity: O(1)

Specified by:

hincrBy in interface BinaryJedisCommands

Parameters:

key -

field -

value -

Returns:

Integer reply The new value at field after the increment operation.

hincrByFloat

public Double hincrByFloat(byte[] key,
                  byte[] field,
                  double value)

Increment the number stored at field in the hash at key by a double precision floating point value. If key does not exist, a new key holding a hash is created. If field does not exist or holds a string, the value is set to 0 before applying the operation. Since the value argument is signed you can use this command to perform both increments and decrements.

The range of values supported by HINCRBYFLOAT is limited to double precision floating point values.

Time complexity: O(1)

Specified by:

hincrByFloat in interface BinaryJedisCommands

Parameters:

key -

field -

value -

Returns:

Double precision floating point reply The new value at field after the increment operation.

hexists

public Boolean hexists(byte[] key,
              byte[] field)

Test for existence of a specified field in a hash. Time complexity: O(1)

Specified by:

hexists in interface BinaryJedisCommands

Parameters:

key -

field -

Returns:

Return 1 if the hash stored at key contains the specified field. Return 0 if the key is not found or the field is not present.

hdel

public Long hdel(byte[] key,
        byte[]... fields)

Remove the specified field from an hash stored at key.

Time complexity: O(1)

Specified by:

hdel in interface BinaryJedisCommands

Parameters:

key -

fields -

Returns:

If the field was present in the hash it is deleted and 1 is returned, otherwise 0 is returned and no operation is performed.

hlen

public Long hlen(byte[] key)

Return the number of items in a hash.

Time complexity: O(1)

Specified by:

hlen in interface BinaryJedisCommands

Parameters:

key -

Returns:

The number of entries (fields) contained in the hash stored at key. If the specified key does not exist, 0 is returned assuming an empty hash.

hkeys

public Set<byte[]> hkeys(byte[] key)

Return all the fields in a hash.

Time complexity: O(N), where N is the total number of entries

Specified by:

hkeys in interface BinaryJedisCommands

Parameters:

key -

Returns:

All the fields names contained into a hash.

hvals

public List<byte[]> hvals(byte[] key)

Return all the values in a hash.

Time complexity: O(N), where N is the total number of entries

Specified by:

hvals in interface BinaryJedisCommands

Parameters:

key -

Returns:

All the fields values contained into a hash.

hgetAll

public Map<byte[],byte[]> hgetAll(byte[] key)

Return all the fields and associated values in a hash.

Time complexity: O(N), where N is the total number of entries

Specified by:

hgetAll in interface BinaryJedisCommands

Parameters:

key -

Returns:

All the fields and values contained into a hash.

rpush

public Long rpush(byte[] key,
         byte[]... strings)

Add the string value to the head (LPUSH) or tail (RPUSH) of the list stored at key. If the key does not exist an empty list is created just before the append operation. If the key exists but is not a List an error is returned.

Time complexity: O(1)

Specified by:

rpush in interface BinaryJedisCommands

Parameters:

key -

strings -

Returns:

Integer reply, specifically, the number of elements inside the list after the push operation.

See Also:

BinaryJedis#rpush(byte[], byte[]...)

lpush

public Long lpush(byte[] key,
         byte[]... strings)

Add the string value to the head (LPUSH) or tail (RPUSH) of the list stored at key. If the key does not exist an empty list is created just before the append operation. If the key exists but is not a List an error is returned.

Time complexity: O(1)

Specified by:

lpush in interface BinaryJedisCommands

Parameters:

key -

strings -

Returns:

Integer reply, specifically, the number of elements inside the list after the push operation.

See Also:

BinaryJedis#rpush(byte[], byte[]...)

llen

public Long llen(byte[] key)

Return the length of the list stored at the specified key. If the key does not exist zero is returned (the same behaviour as for empty lists). If the value stored at key is not a list an error is returned.

Time complexity: O(1)

Specified by:

llen in interface BinaryJedisCommands

Parameters:

key -

Returns:

The length of the list.

lrange

public List<byte[]> lrange(byte[] key,
                  long start,
                  long end)

Return the specified elements of the list stored at the specified key. Start and end are zero-based indexes. 0 is the first element of the list (the list head), 1 the next element and so on.

For example LRANGE foobar 0 2 will return the first three elements of the list.

start and end can also be negative numbers indicating offsets from the end of the list. For example -1 is the last element of the list, -2 the penultimate element and so on.

Consistency with range functions in various programming languages

Note that if you have a list of numbers from 0 to 100, LRANGE 0 10 will return 11 elements, that is, rightmost item is included. This may or may not be consistent with behavior of range-related functions in your programming language of choice (think Ruby's Range.new, Array#slice or Python's range() function).

LRANGE behavior is consistent with one of Tcl.

Out-of-range indexes

Indexes out of range will not produce an error: if start is over the end of the list, or start > end, an empty list is returned. If end is over the end of the list Redis will threat it just like the last element of the list.

Time complexity: O(start+n) (with n being the length of the range and start being the start offset)

Specified by:

lrange in interface BinaryJedisCommands

Parameters:

key -

start -

end -

Returns:

Multi bulk reply, specifically a list of elements in the specified range.

ltrim

public String ltrim(byte[] key,
           long start,
           long end)

Trim an existing list so that it will contain only the specified range of elements specified. Start and end are zero-based indexes. 0 is the first element of the list (the list head), 1 the next element and so on.

For example LTRIM foobar 0 2 will modify the list stored at foobar key so that only the first three elements of the list will remain.

start and end can also be negative numbers indicating offsets from the end of the list. For example -1 is the last element of the list, -2 the penultimate element and so on.

Indexes out of range will not produce an error: if start is over the end of the list, or start > end, an empty list is left as value. If end over the end of the list Redis will threat it just like the last element of the list.

Hint: the obvious use of LTRIM is together with LPUSH/RPUSH. For example:

lpush("mylist", "someelement"); ltrim("mylist", 0, 99); *

The above two commands will push elements in the list taking care that the list will not grow without limits. This is very useful when using Redis to store logs for example. It is important to note that when used in this way LTRIM is an O(1) operation because in the average case just one element is removed from the tail of the list.

Time complexity: O(n) (with n being len of list - len of range)

Specified by:

ltrim in interface BinaryJedisCommands

Parameters:

key -

start -

end -

Returns:

Status code reply

lindex

public byte[] lindex(byte[] key,
            long index)

Return the specified element of the list stored at the specified key. 0 is the first element, 1 the second and so on. Negative indexes are supported, for example -1 is the last element, -2 the penultimate and so on.

If the value stored at key is not of list type an error is returned. If the index is out of range a 'nil' reply is returned.

Note that even if the average time complexity is O(n) asking for the first or the last element of the list is O(1).

Time complexity: O(n) (with n being the length of the list)

Specified by:

lindex in interface BinaryJedisCommands

Parameters:

key -

index -

Returns:

Bulk reply, specifically the requested element

lset

public String lset(byte[] key,
          long index,
          byte[] value)

Set a new value as the element at index position of the List at key.

Out of range indexes will generate an error.

Similarly to other list commands accepting indexes, the index can be negative to access elements starting from the end of the list. So -1 is the last element, -2 is the penultimate, and so forth.

Time complexity:

O(N) (with N being the length of the list), setting the first or last elements of the list is O(1).

Specified by:

lset in interface BinaryJedisCommands

Parameters:

key -

index -

value -

Returns:

Status code reply

See Also:

lindex(byte[], long)

lrem

public Long lrem(byte[] key,
        long count,
        byte[] value)

Remove the first count occurrences of the value element from the list. If count is zero all the elements are removed. If count is negative elements are removed from tail to head, instead to go from head to tail that is the normal behaviour. So for example LREM with count -2 and hello as value to remove against the list (a,b,c,hello,x,hello,hello) will have the list (a,b,c,hello,x). The number of removed elements is returned as an integer, see below for more information about the returned value. Note that non existing keys are considered like empty lists by LREM, so LREM against non existing keys will always return 0.

Time complexity: O(N) (with N being the length of the list)

Specified by:

lrem in interface BinaryJedisCommands

Parameters:

key -

count -

value -

Returns:

Integer Reply, specifically: The number of removed elements if the operation succeeded

lpop

public byte[] lpop(byte[] key)

Atomically return and remove the first (LPOP) or last (RPOP) element of the list. For example if the list contains the elements "a","b","c" LPOP will return "a" and the list will become "b","c".

If the key does not exist or the list is already empty the special value 'nil' is returned.

Specified by:

lpop in interface BinaryJedisCommands

Parameters:

key -

Returns:

Bulk reply

See Also:

rpop(byte[])

rpop

public byte[] rpop(byte[] key)

Atomically return and remove the first (LPOP) or last (RPOP) element of the list. For example if the list contains the elements "a","b","c" LPOP will return "a" and the list will become "b","c".

If the key does not exist or the list is already empty the special value 'nil' is returned.

Specified by:

rpop in interface BinaryJedisCommands

Parameters:

key -

Returns:

Bulk reply

See Also:

lpop(byte[])

rpoplpush

public byte[] rpoplpush(byte[] srckey,
               byte[] dstkey)

Atomically return and remove the last (tail) element of the srckey list, and push the element as the first (head) element of the dstkey list. For example if the source list contains the elements "a","b","c" and the destination list contains the elements "foo","bar" after an RPOPLPUSH command the content of the two lists will be "a","b" and "c","foo","bar".

If the key does not exist or the list is already empty the special value 'nil' is returned. If the srckey and dstkey are the same the operation is equivalent to removing the last element from the list and pusing it as first element of the list, so it's a "list rotation" command.

Time complexity: O(1)

Specified by:

rpoplpush in interface MultiKeyBinaryCommands

Parameters:

srckey -

dstkey -

Returns:

Bulk reply

sadd

public Long sadd(byte[] key,
        byte[]... members)

Add the specified member to the set value stored at key. If member is already a member of the set no operation is performed. If key does not exist a new set with the specified member as sole member is created. If the key exists but does not hold a set value an error is returned.

Time complexity O(1)

Specified by:

sadd in interface BinaryJedisCommands

Parameters:

key -

members -

Returns:

Integer reply, specifically: 1 if the new element was added 0 if the element was already a member of the set

smembers

public Set<byte[]> smembers(byte[] key)

Return all the members (elements) of the set value stored at key. This is just syntax glue for #sinter(byte[]...) SINTER}.

Time complexity O(N)

Specified by:

smembers in interface BinaryJedisCommands

Parameters:

key - the key of the set

Returns:

Multi bulk reply

srem

public Long srem(byte[] key,
        byte[]... member)

Remove the specified member from the set value stored at key. If member was not a member of the set no operation is performed. If key does not hold a set value an error is returned.

Time complexity O(1)

Specified by:

srem in interface BinaryJedisCommands

Parameters:

key - the key of the set

member - the set member to remove

Returns:

Integer reply, specifically: 1 if the new element was removed 0 if the new element was not a member of the set

spop

public byte[] spop(byte[] key)

Remove a random element from a Set returning it as return value. If the Set is empty or the key does not exist, a nil object is returned.

The srandmember(byte[]) command does a similar work but the returned element is not removed from the Set.

Time complexity O(1)

Specified by:

spop in interface BinaryJedisCommands

Parameters:

key -

Returns:

Bulk reply

smove

public Long smove(byte[] srckey,
         byte[] dstkey,
         byte[] member)

Move the specified member from the set at srckey to the set at dstkey. This operation is atomic, in every given moment the element will appear to be in the source or destination set for accessing clients.

If the source set does not exist or does not contain the specified element no operation is performed and zero is returned, otherwise the element is removed from the source set and added to the destination set. On success one is returned, even if the element was already present in the destination set.

An error is raised if the source or destination keys contain a non Set value.

Time complexity O(1)

Specified by:

smove in interface MultiKeyBinaryCommands

Parameters:

srckey -

dstkey -

member -

Returns:

Integer reply, specifically: 1 if the element was moved 0 if the element was not found on the first set and no operation was performed

scard

public Long scard(byte[] key)

Return the set cardinality (number of elements). If the key does not exist 0 is returned, like for empty sets.

Specified by:

scard in interface BinaryJedisCommands

Parameters:

key -

Returns:

Integer reply, specifically: the cardinality (number of elements) of the set as an integer.

sismember

public Boolean sismember(byte[] key,
                byte[] member)

Return 1 if member is a member of the set stored at key, otherwise 0 is returned.

Time complexity O(1)

Specified by:

sismember in interface BinaryJedisCommands

Parameters:

key -

member -

Returns:

Integer reply, specifically: 1 if the element is a member of the set 0 if the element is not a member of the set OR if the key does not exist

sinter

public Set<byte[]> sinter(byte[]... keys)

Return the members of a set resulting from the intersection of all the sets hold at the specified keys. Like in lrange(byte[], long, long) LRANGE} the result is sent to the client as a multi-bulk reply (see the protocol specification for more information). If just a single key is specified, then this command produces the same result as SMEMBERS. Actually SMEMBERS is just syntax sugar for SINTER.

Non existing keys are considered like empty sets, so if one of the keys is missing an empty set is returned (since the intersection with an empty set always is an empty set).

Time complexity O(N*M) worst case where N is the cardinality of the smallest set and M the number of sets

Specified by:

sinter in interface MultiKeyBinaryCommands

Parameters:

keys -

Returns:

Multi bulk reply, specifically the list of common elements.

sinterstore

public Long sinterstore(byte[] dstkey,
               byte[]... keys)

This commnad works exactly like SINTER but instead of being returned the resulting set is sotred as dstkey.

Time complexity O(N*M) worst case where N is the cardinality of the smallest set and M the number of sets

Specified by:

sinterstore in interface MultiKeyBinaryCommands

Parameters:

dstkey -

keys -

Returns:

Status code reply

sunion

public Set<byte[]> sunion(byte[]... keys)

Return the members of a set resulting from the union of all the sets hold at the specified keys. Like in lrange(byte[], long, long) LRANGE} the result is sent to the client as a multi-bulk reply (see the protocol specification for more information). If just a single key is specified, then this command produces the same result as SMEMBERS.

Non existing keys are considered like empty sets.

Time complexity O(N) where N is the total number of elements in all the provided sets

Specified by:

sunion in interface MultiKeyBinaryCommands

Parameters:

keys -

Returns:

Multi bulk reply, specifically the list of common elements.

sunionstore

public Long sunionstore(byte[] dstkey,
               byte[]... keys)

This command works exactly like SUNION but instead of being returned the resulting set is stored as dstkey. Any existing value in dstkey will be over-written.

Time complexity O(N) where N is the total number of elements in all the provided sets

Specified by:

sunionstore in interface MultiKeyBinaryCommands

Parameters:

dstkey -

keys -

Returns:

Status code reply

sdiff

public Set<byte[]> sdiff(byte[]... keys)

Return the difference between the Set stored at key1 and all the Sets key2, ..., keyN

Example:

 key1 = [x, a, b, c]
 key2 = [c]
 key3 = [a, d]
 SDIFF key1,key2,key3 => [x, b]
 

Non existing keys are considered like empty sets.

Time complexity:

O(N) with N being the total number of elements of all the sets

Specified by:

sdiff in interface MultiKeyBinaryCommands

Parameters:

keys -

Returns:

Return the members of a set resulting from the difference between the first set provided and all the successive sets.

sdiffstore

public Long sdiffstore(byte[] dstkey,
              byte[]... keys)

This command works exactly like SDIFF but instead of being returned the resulting set is stored in dstkey.

Specified by:

sdiffstore in interface MultiKeyBinaryCommands

Parameters:

dstkey -

keys -

Returns:

Status code reply

srandmember

public byte[] srandmember(byte[] key)

Return a random element from a Set, without removing the element. If the Set is empty or the key does not exist, a nil object is returned.

The SPOP command does a similar work but the returned element is popped (removed) from the Set.

Time complexity O(1)

Specified by:

srandmember in interface BinaryJedisCommands

Parameters:

key -

Returns:

Bulk reply

srandmember

public List<byte[]> srandmember(byte[] key,
                       int count)

Specified by:

srandmember in interface BinaryJedisCommands

zadd

public Long zadd(byte[] key,
        double score,
        byte[] member)

Add the specified member having the specifeid score to the sorted set stored at key. If member is already a member of the sorted set the score is updated, and the element reinserted in the right position to ensure sorting. If key does not exist a new sorted set with the specified member as sole member is crated. If the key exists but does not hold a sorted set value an error is returned.

The score value can be the string representation of a double precision floating point number.

Time complexity O(log(N)) with N being the number of elements in the sorted set

Specified by:

zadd in interface BinaryJedisCommands

Parameters:

key -

score -

member -

Returns:

Integer reply, specifically: 1 if the new element was added 0 if the element was already a member of the sorted set and the score was updated

zadd

public Long zadd(byte[] key,
        Map<byte[],Double> scoreMembers)

Specified by:

zadd in interface BinaryJedisCommands

zrange

public Set<byte[]> zrange(byte[] key,
                 long start,
                 long end)

Specified by:

zrange in interface BinaryJedisCommands

zrem

public Long zrem(byte[] key,
        byte[]... members)

Remove the specified member from the sorted set value stored at key. If member was not a member of the set no operation is performed. If key does not not hold a set value an error is returned.

Time complexity O(log(N)) with N being the number of elements in the sorted set

Specified by:

zrem in interface BinaryJedisCommands

Parameters:

key -

members -

Returns:

Integer reply, specifically: 1 if the new element was removed 0 if the new element was not a member of the set

zincrby

public Double zincrby(byte[] key,
             double score,
             byte[] member)

If member already exists in the sorted set adds the increment to its score and updates the position of the element in the sorted set accordingly. If member does not already exist in the sorted set it is added with increment as score (that is, like if the previous score was virtually zero). If key does not exist a new sorted set with the specified member as sole member is crated. If the key exists but does not hold a sorted set value an error is returned.

The score value can be the string representation of a double precision floating point number. It's possible to provide a negative value to perform a decrement.

For an introduction to sorted sets check the Introduction to Redis data types page.

Time complexity O(log(N)) with N being the number of elements in the sorted set

Specified by:

zincrby in interface BinaryJedisCommands

Parameters:

key -

score -

member -

Returns:

The new score

zrank

public Long zrank(byte[] key,
         byte[] member)

Return the rank (or index) or member in the sorted set at key, with scores being ordered from low to high.

When the given member does not exist in the sorted set, the special value 'nil' is returned. The returned rank (or index) of the member is 0-based for both commands.

Time complexity:

O(log(N))

Specified by:

zrank in interface BinaryJedisCommands

Parameters:

key -

member -

Returns:

Integer reply or a nil bulk reply, specifically: the rank of the element as an integer reply if the element exists. A nil bulk reply if there is no such element.

See Also:

zrevrank(byte[], byte[])

zrevrank

public Long zrevrank(byte[] key,
            byte[] member)

Return the rank (or index) or member in the sorted set at key, with scores being ordered from high to low.

When the given member does not exist in the sorted set, the special value 'nil' is returned. The returned rank (or index) of the member is 0-based for both commands.

Time complexity:

O(log(N))

Specified by:

zrevrank in interface BinaryJedisCommands

Parameters:

key -

member -

Returns:

Integer reply or a nil bulk reply, specifically: the rank of the element as an integer reply if the element exists. A nil bulk reply if there is no such element.

See Also:

zrank(byte[], byte[])

zrevrange

public Set<byte[]> zrevrange(byte[] key,
                    long start,
                    long end)

Specified by:

zrevrange in interface BinaryJedisCommands

zrangeWithScores

public Set<Tuple> zrangeWithScores(byte[] key,
                          long start,
                          long end)

Specified by:

zrangeWithScores in interface BinaryJedisCommands

zrevrangeWithScores

public Set<Tuple> zrevrangeWithScores(byte[] key,
                             long start,
                             long end)

Specified by:

zrevrangeWithScores in interface BinaryJedisCommands

zcard

public Long zcard(byte[] key)

Return the sorted set cardinality (number of elements). If the key does not exist 0 is returned, like for empty sorted sets.

Time complexity O(1)

Specified by:

zcard in interface BinaryJedisCommands

Parameters:

key -

Returns:

the cardinality (number of elements) of the set as an integer.

zscore

public Double zscore(byte[] key,
            byte[] member)

Return the score of the specified element of the sorted set at key. If the specified element does not exist in the sorted set, or the key does not exist at all, a special 'nil' value is returned.

Time complexity: O(1)

Specified by:

zscore in interface BinaryJedisCommands

Parameters:

key -

member -

Returns:

the score

multi

public Transaction multi()

multi

@Deprecated
public List<Object> multi(TransactionBlock jedisTransaction)

Deprecated.

checkIsInMulti

protected void checkIsInMulti()

connect

public void connect()

disconnect

public void disconnect()

resetState

public void resetState()

watch

public String watch(byte[]... keys)

Specified by:

watch in interface MultiKeyBinaryCommands

unwatch

public String unwatch()

Specified by:

unwatch in interface MultiKeyBinaryCommands

close

public void close()

Specified by:

close in interface Closeable

Specified by:

close in interface AutoCloseable

sort

public List<byte[]> sort(byte[] key)

Sort a Set or a List.

Sort the elements contained in the List, Set, or Sorted Set value at key. By default sorting is numeric with elements being compared as double precision floating point numbers. This is the simplest form of SORT.

Specified by:

sort in interface BinaryJedisCommands

Parameters:

key -

Returns:

Assuming the Set/List at key contains a list of numbers, the return value will be the list of numbers ordered from the smallest to the biggest number.

See Also:

sort(byte[], byte[]), sort(byte[], SortingParams), sort(byte[], SortingParams, byte[])

sort

public List<byte[]> sort(byte[] key,
                SortingParams sortingParameters)

Sort a Set or a List accordingly to the specified parameters.

examples:

Given are the following sets and key/values:

 x = [1, 2, 3]
 y = [a, b, c]
 
 k1 = z
 k2 = y
 k3 = x
 
 w1 = 9
 w2 = 8
 w3 = 7
 

Sort Order:

 sort(x) or sort(x, sp.asc())
 -> [1, 2, 3]
 
 sort(x, sp.desc())
 -> [3, 2, 1]
 
 sort(y)
 -> [c, a, b]
 
 sort(y, sp.alpha())
 -> [a, b, c]
 
 sort(y, sp.alpha().desc())
 -> [c, a, b]
 

Limit (e.g. for Pagination):

 sort(x, sp.limit(0, 2))
 -> [1, 2]
 
 sort(y, sp.alpha().desc().limit(1, 2))
 -> [b, a]
 

Sorting by external keys:

 sort(x, sb.by(w*))
 -> [3, 2, 1]
 
 sort(x, sb.by(w*).desc())
 -> [1, 2, 3]
 

Getting external keys:

 sort(x, sp.by(w*).get(k*))
 -> [x, y, z]
 
 sort(x, sp.by(w*).get(#).get(k*))
 -> [3, x, 2, y, 1, z]
 

Specified by:

sort in interface BinaryJedisCommands

Parameters:

key -

sortingParameters -

Returns:

a list of sorted elements.

See Also:

sort(byte[]), sort(byte[], SortingParams, byte[])

blpop

public List<byte[]> blpop(int timeout,
                 byte[]... keys)

BLPOP (and BRPOP) is a blocking list pop primitive. You can see this commands as blocking versions of LPOP and RPOP able to block if the specified keys don't exist or contain empty lists.

The following is a description of the exact semantic. We describe BLPOP but the two commands are identical, the only difference is that BLPOP pops the element from the left (head) of the list, and BRPOP pops from the right (tail).

Non blocking behavior

When BLPOP is called, if at least one of the specified keys contain a non empty list, an element is popped from the head of the list and returned to the caller together with the name of the key (BLPOP returns a two elements array, the first element is the key, the second the popped value).

Keys are scanned from left to right, so for instance if you issue BLPOP list1 list2 list3 0 against a dataset where list1 does not exist but list2 and list3 contain non empty lists, BLPOP guarantees to return an element from the list stored at list2 (since it is the first non empty list starting from the left).

Blocking behavior

If none of the specified keys exist or contain non empty lists, BLPOP blocks until some other client performs a LPUSH or an RPUSH operation against one of the lists.

Once new data is present on one of the lists, the client finally returns with the name of the key unblocking it and the popped value.

When blocking, if a non-zero timeout is specified, the client will unblock returning a nil special value if the specified amount of seconds passed without a push operation against at least one of the specified keys.

The timeout argument is interpreted as an integer value. A timeout of zero means instead to block forever.

Multiple clients blocking for the same keys

Multiple clients can block for the same key. They are put into a queue, so the first to be served will be the one that started to wait earlier, in a first-blpopping first-served fashion.

blocking POP inside a MULTI/EXEC transaction

BLPOP and BRPOP can be used with pipelining (sending multiple commands and reading the replies in batch), but it does not make sense to use BLPOP or BRPOP inside a MULTI/EXEC block (a Redis transaction).

The behavior of BLPOP inside MULTI/EXEC when the list is empty is to return a multi-bulk nil reply, exactly what happens when the timeout is reached. If you like science fiction, think at it like if inside MULTI/EXEC the time will flow at infinite speed :)

Time complexity: O(1)

Specified by:

blpop in interface MultiKeyBinaryCommands

Parameters:

timeout -

keys -

Returns:

BLPOP returns a two-elements array via a multi bulk reply in order to return both the unblocking key and the popped value.

When a non-zero timeout is specified, and the BLPOP operation timed out, the return value is a nil multi bulk reply. Most client values will return false or nil accordingly to the programming language used.

See Also:

#brpop(int, byte[]...)

sort

public Long sort(byte[] key,
        SortingParams sortingParameters,
        byte[] dstkey)

Sort a Set or a List accordingly to the specified parameters and store the result at dstkey.

Specified by:

sort in interface MultiKeyBinaryCommands

Parameters:

key -

sortingParameters -

dstkey -

Returns:

The number of elements of the list at dstkey.

See Also:

sort(byte[], SortingParams), sort(byte[]), sort(byte[], byte[])

sort

public Long sort(byte[] key,
        byte[] dstkey)

Sort a Set or a List and Store the Result at dstkey.

Sort the elements contained in the List, Set, or Sorted Set value at key and store the result at dstkey. By default sorting is numeric with elements being compared as double precision floating point numbers. This is the simplest form of SORT.

Specified by:

sort in interface MultiKeyBinaryCommands

Parameters:

key -

dstkey -

Returns:

The number of elements of the list at dstkey.

See Also:

sort(byte[]), sort(byte[], SortingParams), sort(byte[], SortingParams, byte[])

brpop

public List<byte[]> brpop(int timeout,
                 byte[]... keys)

BLPOP (and BRPOP) is a blocking list pop primitive. You can see this commands as blocking versions of LPOP and RPOP able to block if the specified keys don't exist or contain empty lists.

The following is a description of the exact semantic. We describe BLPOP but the two commands are identical, the only difference is that BLPOP pops the element from the left (head) of the list, and BRPOP pops from the right (tail).

Non blocking behavior

When BLPOP is called, if at least one of the specified keys contain a non empty list, an element is popped from the head of the list and returned to the caller together with the name of the key (BLPOP returns a two elements array, the first element is the key, the second the popped value).

Keys are scanned from left to right, so for instance if you issue BLPOP list1 list2 list3 0 against a dataset where list1 does not exist but list2 and list3 contain non empty lists, BLPOP guarantees to return an element from the list stored at list2 (since it is the first non empty list starting from the left).

Blocking behavior

If none of the specified keys exist or contain non empty lists, BLPOP blocks until some other client performs a LPUSH or an RPUSH operation against one of the lists.

Once new data is present on one of the lists, the client finally returns with the name of the key unblocking it and the popped value.

When blocking, if a non-zero timeout is specified, the client will unblock returning a nil special value if the specified amount of seconds passed without a push operation against at least one of the specified keys.

The timeout argument is interpreted as an integer value. A timeout of zero means instead to block forever.

Multiple clients blocking for the same keys

Multiple clients can block for the same key. They are put into a queue, so the first to be served will be the one that started to wait earlier, in a first-blpopping first-served fashion.

blocking POP inside a MULTI/EXEC transaction

BLPOP and BRPOP can be used with pipelining (sending multiple commands and reading the replies in batch), but it does not make sense to use BLPOP or BRPOP inside a MULTI/EXEC block (a Redis transaction).

The behavior of BLPOP inside MULTI/EXEC when the list is empty is to return a multi-bulk nil reply, exactly what happens when the timeout is reached. If you like science fiction, think at it like if inside MULTI/EXEC the time will flow at infinite speed :)

Time complexity: O(1)

Specified by:

brpop in interface MultiKeyBinaryCommands

Parameters:

timeout -

keys -

Returns:

BLPOP returns a two-elements array via a multi bulk reply in order to return both the unblocking key and the popped value.

When a non-zero timeout is specified, and the BLPOP operation timed out, the return value is a nil multi bulk reply. Most client values will return false or nil accordingly to the programming language used.

See Also:

#blpop(int, byte[]...)

blpop

@Deprecated
public List<byte[]> blpop(byte[] arg)

Deprecated. unusable command, this command will be removed in 3.0.0.

Specified by:

blpop in interface BinaryJedisCommands

brpop

@Deprecated
public List<byte[]> brpop(byte[] arg)

Deprecated. unusable command, this command will be removed in 3.0.0.

Specified by:

brpop in interface BinaryJedisCommands

blpop

public List<byte[]> blpop(byte[]... args)

Specified by:

blpop in interface MultiKeyBinaryCommands

brpop

public List<byte[]> brpop(byte[]... args)

Specified by:

brpop in interface MultiKeyBinaryCommands

auth

public String auth(String password)

Request for authentication in a password protected Redis server. A Redis server can be instructed to require a password before to allow clients to issue commands. This is done using the requirepass directive in the Redis configuration file. If the password given by the client is correct the server replies with an OK status code reply and starts accepting commands from the client. Otherwise an error is returned and the clients needs to try a new password. Note that for the high performance nature of Redis it is possible to try a lot of passwords in parallel in very short time, so make sure to generate a strong and very long password so that this attack is infeasible.

Specified by:

auth in interface BasicCommands

Parameters:

password -

Returns:

Status code reply

pipelined

@Deprecated
public List<Object> pipelined(PipelineBlock jedisPipeline)

Deprecated.

pipelined

public Pipeline pipelined()

zcount

public Long zcount(byte[] key,
          double min,
          double max)

Specified by:

zcount in interface BinaryJedisCommands

zcount

public Long zcount(byte[] key,
          byte[] min,
          byte[] max)

Specified by:

zcount in interface BinaryJedisCommands

zrangeByScore

public Set<byte[]> zrangeByScore(byte[] key,
                        double min,
                        double max)

Return the all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max).

The elements having the same score are returned sorted lexicographically as ASCII strings (this follows from a property of Redis sorted sets and does not involve further computation).

Using the optional LIMIT it's possible to get only a range of the matching elements in an SQL-alike way. Note that if offset is large the commands needs to traverse the list for offset elements and this adds up to the O(M) figure.

The ZCOUNT command is similar to ZRANGEBYSCORE but instead of returning the actual elements in the specified interval, it just returns the number of matching elements.

Exclusive intervals and infinity

min and max can be -inf and +inf, so that you are not required to know what's the greatest or smallest element in order to take, for instance, elements "up to a given value".

Also while the interval is for default closed (inclusive) it's possible to specify open intervals prefixing the score with a "(" character, so for instance:

ZRANGEBYSCORE zset (1.3 5

Will return all the values with score > 1.3 and <= 5, while for instance:

ZRANGEBYSCORE zset (5 (10

Will return all the values with score > 5 and < 10 (5 and 10 excluded).

Time complexity:

O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of elements returned by the command, so if M is constant (for instance you always ask for the first ten elements with LIMIT) you can consider it O(log(N))

Specified by:

zrangeByScore in interface BinaryJedisCommands

Parameters:

key -

min -

max -

Returns:

Multi bulk reply specifically a list of elements in the specified score range.

See Also:

zrangeByScore(byte[], double, double), zrangeByScore(byte[], double, double, int, int), zrangeByScoreWithScores(byte[], double, double), zrangeByScoreWithScores(byte[], double, double, int, int), zcount(byte[], double, double)

zrangeByScore

public Set<byte[]> zrangeByScore(byte[] key,
                        byte[] min,
                        byte[] max)

Specified by:

zrangeByScore in interface BinaryJedisCommands

zrangeByScore

public Set<byte[]> zrangeByScore(byte[] key,
                        double min,
                        double max,
                        int offset,
                        int count)

Return the all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max).

The elements having the same score are returned sorted lexicographically as ASCII strings (this follows from a property of Redis sorted sets and does not involve further computation).

Using the optional LIMIT it's possible to get only a range of the matching elements in an SQL-alike way. Note that if offset is large the commands needs to traverse the list for offset elements and this adds up to the O(M) figure.

The ZCOUNT command is similar to ZRANGEBYSCORE but instead of returning the actual elements in the specified interval, it just returns the number of matching elements.

Exclusive intervals and infinity

min and max can be -inf and +inf, so that you are not required to know what's the greatest or smallest element in order to take, for instance, elements "up to a given value".

Also while the interval is for default closed (inclusive) it's possible to specify open intervals prefixing the score with a "(" character, so for instance:

ZRANGEBYSCORE zset (1.3 5

Will return all the values with score > 1.3 and <= 5, while for instance:

ZRANGEBYSCORE zset (5 (10

Will return all the values with score > 5 and < 10 (5 and 10 excluded).

Time complexity:

O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of elements returned by the command, so if M is constant (for instance you always ask for the first ten elements with LIMIT) you can consider it O(log(N))

Specified by:

zrangeByScore in interface BinaryJedisCommands

Parameters:

key -

min -

max -

Returns:

Multi bulk reply specifically a list of elements in the specified score range.

See Also:

zrangeByScore(byte[], double, double), zrangeByScore(byte[], double, double, int, int), zrangeByScoreWithScores(byte[], double, double), zrangeByScoreWithScores(byte[], double, double, int, int), zcount(byte[], double, double)

zrangeByScore

public Set<byte[]> zrangeByScore(byte[] key,
                        byte[] min,
                        byte[] max,
                        int offset,
                        int count)

Specified by:

zrangeByScore in interface BinaryJedisCommands

zrangeByScoreWithScores

public Set<Tuple> zrangeByScoreWithScores(byte[] key,
                                 double min,
                                 double max)

Return the all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max).

The elements having the same score are returned sorted lexicographically as ASCII strings (this follows from a property of Redis sorted sets and does not involve further computation).

Using the optional LIMIT it's possible to get only a range of the matching elements in an SQL-alike way. Note that if offset is large the commands needs to traverse the list for offset elements and this adds up to the O(M) figure.

The ZCOUNT command is similar to ZRANGEBYSCORE but instead of returning the actual elements in the specified interval, it just returns the number of matching elements.

Exclusive intervals and infinity

min and max can be -inf and +inf, so that you are not required to know what's the greatest or smallest element in order to take, for instance, elements "up to a given value".

Also while the interval is for default closed (inclusive) it's possible to specify open intervals prefixing the score with a "(" character, so for instance:

ZRANGEBYSCORE zset (1.3 5

Will return all the values with score > 1.3 and <= 5, while for instance:

ZRANGEBYSCORE zset (5 (10

Will return all the values with score > 5 and < 10 (5 and 10 excluded).

Time complexity:

O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of elements returned by the command, so if M is constant (for instance you always ask for the first ten elements with LIMIT) you can consider it O(log(N))

Specified by:

zrangeByScoreWithScores in interface BinaryJedisCommands

Parameters:

key -

min -

max -

Returns:

Multi bulk reply specifically a list of elements in the specified score range.

See Also:

zrangeByScore(byte[], double, double), zrangeByScore(byte[], double, double, int, int), zrangeByScoreWithScores(byte[], double, double), zrangeByScoreWithScores(byte[], double, double, int, int), zcount(byte[], double, double)

zrangeByScoreWithScores

public Set<Tuple> zrangeByScoreWithScores(byte[] key,
                                 byte[] min,
                                 byte[] max)

Specified by:

zrangeByScoreWithScores in interface BinaryJedisCommands

zrangeByScoreWithScores

public Set<Tuple> zrangeByScoreWithScores(byte[] key,
                                 double min,
                                 double max,
                                 int offset,
                                 int count)

Return the all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max).

The elements having the same score are returned sorted lexicographically as ASCII strings (this follows from a property of Redis sorted sets and does not involve further computation).

Using the optional LIMIT it's possible to get only a range of the matching elements in an SQL-alike way. Note that if offset is large the commands needs to traverse the list for offset elements and this adds up to the O(M) figure.

The ZCOUNT command is similar to ZRANGEBYSCORE but instead of returning the actual elements in the specified interval, it just returns the number of matching elements.

Exclusive intervals and infinity

min and max can be -inf and +inf, so that you are not required to know what's the greatest or smallest element in order to take, for instance, elements "up to a given value".

Also while the interval is for default closed (inclusive) it's possible to specify open intervals prefixing the score with a "(" character, so for instance:

ZRANGEBYSCORE zset (1.3 5

Will return all the values with score > 1.3 and <= 5, while for instance:

ZRANGEBYSCORE zset (5 (10

Will return all the values with score > 5 and < 10 (5 and 10 excluded).

Time complexity:

O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of elements returned by the command, so if M is constant (for instance you always ask for the first ten elements with LIMIT) you can consider it O(log(N))

Specified by:

zrangeByScoreWithScores in interface BinaryJedisCommands

Parameters:

key -

min -

max -

Returns:

Multi bulk reply specifically a list of elements in the specified score range.

See Also:

zrangeByScore(byte[], double, double), zrangeByScore(byte[], double, double, int, int), zrangeByScoreWithScores(byte[], double, double), zrangeByScoreWithScores(byte[], double, double, int, int), zcount(byte[], double, double)

zrangeByScoreWithScores

public Set<Tuple> zrangeByScoreWithScores(byte[] key,
                                 byte[] min,
                                 byte[] max,
                                 int offset,
                                 int count)

Specified by:

zrangeByScoreWithScores in interface BinaryJedisCommands

zrevrangeByScore

public Set<byte[]> zrevrangeByScore(byte[] key,
                           double max,
                           double min)

Specified by:

zrevrangeByScore in interface BinaryJedisCommands

zrevrangeByScore

public Set<byte[]> zrevrangeByScore(byte[] key,
                           byte[] max,
                           byte[] min)

Specified by:

zrevrangeByScore in interface BinaryJedisCommands

zrevrangeByScore

public Set<byte[]> zrevrangeByScore(byte[] key,
                           double max,
                           double min,
                           int offset,
                           int count)

Specified by:

zrevrangeByScore in interface BinaryJedisCommands

zrevrangeByScore

public Set<byte[]> zrevrangeByScore(byte[] key,
                           byte[] max,
                           byte[] min,
                           int offset,
                           int count)

Specified by:

zrevrangeByScore in interface BinaryJedisCommands

zrevrangeByScoreWithScores

public Set<Tuple> zrevrangeByScoreWithScores(byte[] key,
                                    double max,
                                    double min)

Specified by:

zrevrangeByScoreWithScores in interface BinaryJedisCommands

zrevrangeByScoreWithScores

public Set<Tuple> zrevrangeByScoreWithScores(byte[] key,
                                    double max,
                                    double min,
                                    int offset,
                                    int count)

Specified by:

zrevrangeByScoreWithScores in interface BinaryJedisCommands

zrevrangeByScoreWithScores

public Set<Tuple> zrevrangeByScoreWithScores(byte[] key,
                                    byte[] max,
                                    byte[] min)

Specified by:

zrevrangeByScoreWithScores in interface BinaryJedisCommands

zrevrangeByScoreWithScores

public Set<Tuple> zrevrangeByScoreWithScores(byte[] key,
                                    byte[] max,
                                    byte[] min,
                                    int offset,
                                    int count)

Specified by:

zrevrangeByScoreWithScores in interface BinaryJedisCommands

zremrangeByRank

public Long zremrangeByRank(byte[] key,
                   long start,
                   long end)

Remove all elements in the sorted set at key with rank between start and end. Start and end are 0-based with rank 0 being the element with the lowest score. Both start and end can be negative numbers, where they indicate offsets starting at the element with the highest rank. For example: -1 is the element with the highest score, -2 the element with the second highest score and so forth.

Time complexity: O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of elements removed by the operation

Specified by:

zremrangeByRank in interface BinaryJedisCommands

zremrangeByScore

public Long zremrangeByScore(byte[] key,
                    double start,
                    double end)

Remove all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max).

Time complexity:

O(log(N))+O(M) with N being the number of elements in the sorted set and M the number of elements removed by the operation

Specified by:

zremrangeByScore in interface BinaryJedisCommands

Parameters:

key -

start -

end -

Returns:

Integer reply, specifically the number of elements removed.

zremrangeByScore

public Long zremrangeByScore(byte[] key,
                    byte[] start,
                    byte[] end)

Specified by:

zremrangeByScore in interface BinaryJedisCommands

zunionstore

public Long zunionstore(byte[] dstkey,
               byte[]... sets)

Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at dstkey. It is mandatory to provide the number of input keys N, before passing the input keys and the other (optional) arguments.

As the terms imply, the #zinterstore(byte[], byte[]...) ZINTERSTORE} command requires an element to be present in each of the given inputs to be inserted in the result. The #zunionstore(byte[], byte[]...)} command inserts all elements across all inputs.

Using the WEIGHTS option, it is possible to add weight to each input sorted set. This means that the score of each element in the sorted set is first multiplied by this weight before being passed to the aggregation. When this option is not given, all weights default to 1.

With the AGGREGATE option, it's possible to specify how the results of the union or intersection are aggregated. This option defaults to SUM, where the score of an element is summed across the inputs where it exists. When this option is set to be either MIN or MAX, the resulting set will contain the minimum or maximum score of an element across the inputs where it exists.

Time complexity: O(N) + O(M log(M)) with N being the sum of the sizes of the input sorted sets, and M being the number of elements in the resulting sorted set

Specified by:

zunionstore in interface MultiKeyBinaryCommands

Parameters:

dstkey -

sets -

Returns:

Integer reply, specifically the number of elements in the sorted set at dstkey

See Also:

#zunionstore(byte[], byte[]...), #zunionstore(byte[], ZParams, byte[]...), #zinterstore(byte[], byte[]...), #zinterstore(byte[], ZParams, byte[]...)

zunionstore

public Long zunionstore(byte[] dstkey,
               ZParams params,
               byte[]... sets)

Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at dstkey. It is mandatory to provide the number of input keys N, before passing the input keys and the other (optional) arguments.

As the terms imply, the ZINTERSTORE command requires an element to be present in each of the given inputs to be inserted in the result. The ZUNIONSTORE command inserts all elements across all inputs.

Using the WEIGHTS option, it is possible to add weight to each input sorted set. This means that the score of each element in the sorted set is first multiplied by this weight before being passed to the aggregation. When this option is not given, all weights default to 1.

With the AGGREGATE option, it's possible to specify how the results of the union or intersection are aggregated. This option defaults to SUM, where the score of an element is summed across the inputs where it exists. When this option is set to be either MIN or MAX, the resulting set will contain the minimum or maximum score of an element across the inputs where it exists.

Time complexity: O(N) + O(M log(M)) with N being the sum of the sizes of the input sorted sets, and M being the number of elements in the resulting sorted set

Specified by:

zunionstore in interface MultiKeyBinaryCommands

Parameters:

dstkey -

sets -

params -

Returns:

Integer reply, specifically the number of elements in the sorted set at dstkey

See Also:

#zunionstore(byte[], byte[]...), #zunionstore(byte[], ZParams, byte[]...), #zinterstore(byte[], byte[]...), #zinterstore(byte[], ZParams, byte[]...)

zinterstore

public Long zinterstore(byte[] dstkey,
               byte[]... sets)

Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at dstkey. It is mandatory to provide the number of input keys N, before passing the input keys and the other (optional) arguments.

As the terms imply, the ZINTERSTORE command requires an element to be present in each of the given inputs to be inserted in the result. The ZUNIONSTORE command inserts all elements across all inputs.

Using the WEIGHTS option, it is possible to add weight to each input sorted set. This means that the score of each element in the sorted set is first multiplied by this weight before being passed to the aggregation. When this option is not given, all weights default to 1.

With the AGGREGATE option, it's possible to specify how the results of the union or intersection are aggregated. This option defaults to SUM, where the score of an element is summed across the inputs where it exists. When this option is set to be either MIN or MAX, the resulting set will contain the minimum or maximum score of an element across the inputs where it exists.

Time complexity: O(N) + O(M log(M)) with N being the sum of the sizes of the input sorted sets, and M being the number of elements in the resulting sorted set

Specified by:

zinterstore in interface MultiKeyBinaryCommands

Parameters:

dstkey -

sets -

Returns:

Integer reply, specifically the number of elements in the sorted set at dstkey

See Also:

#zunionstore(byte[], byte[]...), #zunionstore(byte[], ZParams, byte[]...), #zinterstore(byte[], byte[]...), #zinterstore(byte[], ZParams, byte[]...)

zinterstore

public Long zinterstore(byte[] dstkey,
               ZParams params,
               byte[]... sets)

Creates a union or intersection of N sorted sets given by keys k1 through kN, and stores it at dstkey. It is mandatory to provide the number of input keys N, before passing the input keys and the other (optional) arguments.

As the terms imply, the ZINTERSTORE command requires an element to be present in each of the given inputs to be inserted in the result. The ZUNIONSTORE command inserts all elements across all inputs.

Using the WEIGHTS option, it is possible to add weight to each input sorted set. This means that the score of each element in the sorted set is first multiplied by this weight before being passed to the aggregation. When this option is not given, all weights default to 1.

With the AGGREGATE option, it's possible to specify how the results of the union or intersection are aggregated. This option defaults to SUM, where the score of an element is summed across the inputs where it exists. When this option is set to be either MIN or MAX, the resulting set will contain the minimum or maximum score of an element across the inputs where it exists.

Time complexity: O(N) + O(M log(M)) with N being the sum of the sizes of the input sorted sets, and M being the number of elements in the resulting sorted set

Specified by:

zinterstore in interface MultiKeyBinaryCommands

Parameters:

dstkey -

sets -

params -

Returns:

Integer reply, specifically the number of elements in the sorted set at dstkey

See Also:

#zunionstore(byte[], byte[]...), #zunionstore(byte[], ZParams, byte[]...), #zinterstore(byte[], byte[]...), #zinterstore(byte[], ZParams, byte[]...)

zlexcount

public Long zlexcount(byte[] key,
             byte[] min,
             byte[] max)

Specified by:

zlexcount in interface BinaryJedisCommands

zrangeByLex

public Set<byte[]> zrangeByLex(byte[] key,
                      byte[] min,
                      byte[] max)

Specified by:

zrangeByLex in interface BinaryJedisCommands

zrangeByLex

public Set<byte[]> zrangeByLex(byte[] key,
                      byte[] min,
                      byte[] max,
                      int offset,
                      int count)

Specified by:

zrangeByLex in interface BinaryJedisCommands

zremrangeByLex

public Long zremrangeByLex(byte[] key,
                  byte[] min,
                  byte[] max)

Specified by:

zremrangeByLex in interface BinaryJedisCommands

save

public String save()

Synchronously save the DB on disk.

Save the whole dataset on disk (this means that all the databases are saved, as well as keys with an EXPIRE set (the expire is preserved). The server hangs while the saving is not completed, no connection is served in the meanwhile. An OK code is returned when the DB was fully stored in disk.

The background variant of this command is BGSAVE that is able to perform the saving in the background while the server continues serving other clients.

Specified by:

save in interface BasicCommands

Returns:

Status code reply

bgsave

public String bgsave()

Asynchronously save the DB on disk.

Save the DB in background. The OK code is immediately returned. Redis forks, the parent continues to server the clients, the child saves the DB on disk then exit. A client my be able to check if the operation succeeded using the LASTSAVE command.

Specified by:

bgsave in interface BasicCommands

Returns:

Status code reply

bgrewriteaof

public String bgrewriteaof()

Rewrite the append only file in background when it gets too big. Please for detailed information about the Redis Append Only File check the Append Only File Howto.

BGREWRITEAOF rewrites the Append Only File in background when it gets too big. The Redis Append Only File is a Journal, so every operation modifying the dataset is logged in the Append Only File (and replayed at startup). This means that the Append Only File always grows. In order to rebuild its content the BGREWRITEAOF creates a new version of the append only file starting directly form the dataset in memory in order to guarantee the generation of the minimal number of commands needed to rebuild the database.

Specified by:

bgrewriteaof in interface BasicCommands

Returns:

Status code reply

lastsave

public Long lastsave()

Return the UNIX time stamp of the last successfully saving of the dataset on disk.

Return the UNIX TIME of the last DB save executed with success. A client may check if a BGSAVE command succeeded reading the LASTSAVE value, then issuing a BGSAVE command and checking at regular intervals every N seconds if LASTSAVE changed.

Specified by:

lastsave in interface BasicCommands

Returns:

Integer reply, specifically an UNIX time stamp.

shutdown

public String shutdown()

Synchronously save the DB on disk, then shutdown the server.

Stop all the clients, save the DB, then quit the server. This commands makes sure that the DB is switched off without the lost of any data. This is not guaranteed if the client uses simply SAVE and then QUIT because other clients may alter the DB data between the two commands.

Specified by:

shutdown in interface BasicCommands

Returns:

Status code reply on error. On success nothing is returned since the server quits and the connection is closed.

info

public String info()

Provide information and statistics about the server.

The info command returns different information and statistics about the server in an format that's simple to parse by computers and easy to read by humans.

Format of the returned String:

All the fields are in the form field:value

 edis_version:0.07
 connected_clients:1
 connected_slaves:0
 used_memory:3187
 changes_since_last_save:0
 last_save_time:1237655729
 total_connections_received:1
 total_commands_processed:1
 uptime_in_seconds:25
 uptime_in_days:0
 

Notes

used_memory is returned in bytes, and is the total number of bytes allocated by the program using malloc.

uptime_in_days is redundant since the uptime in seconds contains already the full uptime information, this field is only mainly present for humans.

changes_since_last_save does not refer to the number of key changes, but to the number of operations that produced some kind of change in the dataset.

Specified by:

info in interface BasicCommands

Returns:

Bulk reply

info

public String info(String section)

Specified by:

info in interface BasicCommands

monitor

public void monitor(JedisMonitor jedisMonitor)

Dump all the received requests in real time.

MONITOR is a debugging command that outputs the whole sequence of commands received by the Redis server. is very handy in order to understand what is happening into the database. This command is used directly via telnet.

Parameters:

jedisMonitor -

slaveof

public String slaveof(String host,
             int port)

Change the replication settings.

The SLAVEOF command can change the replication settings of a slave on the fly. If a Redis server is arleady acting as slave, the command SLAVEOF NO ONE will turn off the replicaiton turning the Redis server into a MASTER. In the proper form SLAVEOF hostname port will make the server a slave of the specific server listening at the specified hostname and port.

If a server is already a slave of some master, SLAVEOF hostname port will stop the replication against the old server and start the synchrnonization against the new one discarding the old dataset.

The form SLAVEOF no one will stop replication turning the server into a MASTER but will not discard the replication. So if the old master stop working it is possible to turn the slave into a master and set the application to use the new master in read/write. Later when the other Redis server will be fixed it can be configured in order to work as slave.

Specified by:

slaveof in interface BasicCommands

Parameters:

host -

port -

Returns:

Status code reply

slaveofNoOne

public String slaveofNoOne()

Specified by:

slaveofNoOne in interface BasicCommands

configGet

public List<byte[]> configGet(byte[] pattern)

Retrieve the configuration of a running Redis server. Not all the configuration parameters are supported.

CONFIG GET returns the current configuration parameters. This sub command only accepts a single argument, that is glob style pattern. All the configuration parameters matching this parameter are reported as a list of key-value pairs.

Example:

 $ redis-cli config get '*'
 1. "dbfilename"
 2. "dump.rdb"
 3. "requirepass"
 4. (nil)
 5. "masterauth"
 6. (nil)
 7. "maxmemory"
 8. "0\n"
 9. "appendfsync"
 10. "everysec"
 11. "save"
 12. "3600 1 300 100 60 10000"
 
 $ redis-cli config get 'm*'
 1. "masterauth"
 2. (nil)
 3. "maxmemory"
 4. "0\n"
 

Specified by:

configGet in interface AdvancedBinaryJedisCommands

Parameters:

pattern -

Returns:

Bulk reply.

configResetStat

public String configResetStat()

Reset the stats returned by INFO

Specified by:

configResetStat in interface BasicCommands

Returns:

configSet

public byte[] configSet(byte[] parameter,
               byte[] value)

Alter the configuration of a running Redis server. Not all the configuration parameters are supported.

The list of configuration parameters supported by CONFIG SET can be obtained issuing a CONFIG GET * command.

The configuration set using CONFIG SET is immediately loaded by the Redis server that will start acting as specified starting from the next command.

Parameters value format

The value of the configuration parameter is the same as the one of the same parameter in the Redis configuration file, with the following exceptions:

• The save paramter is a list of space-separated integers. Every pair of integers specify the time and number of changes limit to trigger a save. For instance the command CONFIG SET save "3600 10 60 10000" will configure the server to issue a background saving of the RDB file every 3600 seconds if there are at least 10 changes in the dataset, and every 60 seconds if there are at least 10000 changes. To completely disable automatic snapshots just set the parameter as an empty string.
• All the integer parameters representing memory are returned and accepted only using bytes as unit.

Specified by:

configSet in interface AdvancedBinaryJedisCommands

Parameters:

parameter -

value -

Returns:

Status code reply

isConnected

public boolean isConnected()

strlen

public Long strlen(byte[] key)

Specified by:

strlen in interface BinaryJedisCommands

sync

public void sync()

lpushx

public Long lpushx(byte[] key,
          byte[]... string)

Specified by:

lpushx in interface BinaryJedisCommands

persist

public Long persist(byte[] key)

Undo a expire at turning the expire key into a normal key.

Time complexity: O(1)

Specified by:

persist in interface BinaryJedisCommands

Parameters:

key -

Returns:

Integer reply, specifically: 1: the key is now persist. 0: the key is not persist (only happens when key not set).

rpushx

public Long rpushx(byte[] key,
          byte[]... string)

Specified by:

rpushx in interface BinaryJedisCommands

echo

public byte[] echo(byte[] string)

Specified by:

echo in interface BinaryJedisCommands

linsert

public Long linsert(byte[] key,
           BinaryClient.LIST_POSITION where,
           byte[] pivot,
           byte[] value)

Specified by:

linsert in interface BinaryJedisCommands

debug

public String debug(DebugParams params)

Specified by:

debug in interface BasicCommands

getClient

public Client getClient()

brpoplpush

public byte[] brpoplpush(byte[] source,
                byte[] destination,
                int timeout)

Pop a value from a list, push it to another list and return it; or block until one is available

Specified by:

brpoplpush in interface MultiKeyBinaryCommands

Parameters:

source -

destination -

timeout -

Returns:

the element

setbit

public Boolean setbit(byte[] key,
             long offset,
             boolean value)

Sets or clears the bit at offset in the string value stored at key

Specified by:

setbit in interface BinaryJedisCommands

Parameters:

key -

offset -

value -

Returns:

setbit

public Boolean setbit(byte[] key,
             long offset,
             byte[] value)

Specified by:

setbit in interface BinaryJedisCommands

getbit

public Boolean getbit(byte[] key,
             long offset)

Returns the bit value at offset in the string value stored at key

Specified by:

getbit in interface BinaryJedisCommands

Parameters:

key -

offset -

Returns:

bitpos

public Long bitpos(byte[] key,
          boolean value)

bitpos

public Long bitpos(byte[] key,
          boolean value,
          BitPosParams params)

setrange

public Long setrange(byte[] key,
            long offset,
            byte[] value)

Specified by:

setrange in interface BinaryJedisCommands

getrange

public byte[] getrange(byte[] key,
              long startOffset,
              long endOffset)

Specified by:

getrange in interface BinaryJedisCommands

publish

public Long publish(byte[] channel,
           byte[] message)

Specified by:

publish in interface MultiKeyBinaryCommands

subscribe

public void subscribe(BinaryJedisPubSub jedisPubSub,
             byte[]... channels)

Specified by:

subscribe in interface MultiKeyBinaryCommands

psubscribe

public void psubscribe(BinaryJedisPubSub jedisPubSub,
              byte[]... patterns)

Specified by:

psubscribe in interface MultiKeyBinaryCommands

getDB

public Long getDB()

Specified by:

getDB in interface BasicCommands

eval

public Object eval(byte[] script,
          List<byte[]> keys,
          List<byte[]> args)

Evaluates scripts using the Lua interpreter built into Redis starting from version 2.6.0.

Specified by:

eval in interface BinaryScriptingCommands

Returns:

Script result

eval

public Object eval(byte[] script,
          byte[] keyCount,
          byte[]... params)

Specified by:

eval in interface BinaryScriptingCommands

eval

public Object eval(byte[] script,
          int keyCount,
          byte[]... params)

Specified by:

eval in interface BinaryScriptingCommands

eval

public Object eval(byte[] script)

Specified by:

eval in interface BinaryScriptingCommands

evalsha

public Object evalsha(byte[] sha1)

Specified by:

evalsha in interface BinaryScriptingCommands

evalsha

public Object evalsha(byte[] sha1,
             List<byte[]> keys,
             List<byte[]> args)

Specified by:

evalsha in interface BinaryScriptingCommands

evalsha

public Object evalsha(byte[] sha1,
             int keyCount,
             byte[]... params)

Specified by:

evalsha in interface BinaryScriptingCommands

scriptFlush

public String scriptFlush()

Specified by:

scriptFlush in interface BinaryScriptingCommands

scriptExists

public List<Long> scriptExists(byte[]... sha1)

Specified by:

scriptExists in interface BinaryScriptingCommands

scriptLoad

public byte[] scriptLoad(byte[] script)

Specified by:

scriptLoad in interface BinaryScriptingCommands

scriptKill

public String scriptKill()

Specified by:

scriptKill in interface BinaryScriptingCommands

slowlogReset

public String slowlogReset()

Specified by:

slowlogReset in interface AdvancedBinaryJedisCommands

slowlogLen

public Long slowlogLen()

Specified by:

slowlogLen in interface AdvancedBinaryJedisCommands

slowlogGetBinary

public List<byte[]> slowlogGetBinary()

Specified by:

slowlogGetBinary in interface AdvancedBinaryJedisCommands

slowlogGetBinary

public List<byte[]> slowlogGetBinary(long entries)

Specified by:

slowlogGetBinary in interface AdvancedBinaryJedisCommands

objectRefcount

public Long objectRefcount(byte[] key)

Specified by:

objectRefcount in interface AdvancedBinaryJedisCommands

objectEncoding

public byte[] objectEncoding(byte[] key)

Specified by:

objectEncoding in interface AdvancedBinaryJedisCommands

objectIdletime

public Long objectIdletime(byte[] key)

Specified by:

objectIdletime in interface AdvancedBinaryJedisCommands

bitcount

public Long bitcount(byte[] key)

Specified by:

bitcount in interface BinaryJedisCommands

bitcount

public Long bitcount(byte[] key,
            long start,
            long end)

Specified by:

bitcount in interface BinaryJedisCommands

bitop

public Long bitop(BitOP op,
         byte[] destKey,
         byte[]... srcKeys)

Specified by:

bitop in interface MultiKeyBinaryCommands

dump

public byte[] dump(byte[] key)

restore

public String restore(byte[] key,
             int ttl,
             byte[] serializedValue)

pexpire

@Deprecated
public Long pexpire(byte[] key,
                      int milliseconds)

Deprecated.

pexpire

public Long pexpire(byte[] key,
           long milliseconds)

pexpireAt

public Long pexpireAt(byte[] key,
             long millisecondsTimestamp)

pttl

public Long pttl(byte[] key)

psetex

public String psetex(byte[] key,
            int milliseconds,
            byte[] value)

set

public String set(byte[] key,
         byte[] value,
         byte[] nxxx)

set

public String set(byte[] key,
         byte[] value,
         byte[] nxxx,
         byte[] expx,
         int time)

clientKill

public String clientKill(byte[] client)

clientGetname

public String clientGetname()

clientList

public String clientList()

clientSetname

public String clientSetname(byte[] name)

time

public List<String> time()

migrate

public String migrate(byte[] host,
             int port,
             byte[] key,
             int destinationDb,
             int timeout)

waitReplicas

public Long waitReplicas(int replicas,
                long timeout)

Syncrhonous replication of Redis as described here: http://antirez.com/news/66 Since Java Object class has implemented "wait" method, we cannot use it, so I had to change the name of the method. Sorry :S

Specified by:

waitReplicas in interface BasicCommands

pfadd

public Long pfadd(byte[] key,
         byte[]... elements)

Specified by:

pfadd in interface BinaryJedisCommands

pfcount

public long pfcount(byte[] key)

Specified by:

pfcount in interface BinaryJedisCommands

pfmerge

public String pfmerge(byte[] destkey,
             byte[]... sourcekeys)

Specified by:

pfmerge in interface MultiKeyBinaryCommands

pfcount

public Long pfcount(byte[]... keys)

Specified by:

pfcount in interface MultiKeyBinaryCommands

scan

public ScanResult<byte[]> scan(byte[] cursor)

scan

public ScanResult<byte[]> scan(byte[] cursor,
                      ScanParams params)

hscan

public ScanResult<Map.Entry<byte[],byte[]>> hscan(byte[] key,
                                         byte[] cursor)

hscan

public ScanResult<Map.Entry<byte[],byte[]>> hscan(byte[] key,
                                         byte[] cursor,
                                         ScanParams params)

sscan

public ScanResult<byte[]> sscan(byte[] key,
                       byte[] cursor)

sscan

public ScanResult<byte[]> sscan(byte[] key,
                       byte[] cursor,
                       ScanParams params)

zscan

public ScanResult<Tuple> zscan(byte[] key,
                      byte[] cursor)

zscan

public ScanResult<Tuple> zscan(byte[] key,
                      byte[] cursor,
                      ScanParams params)