BatchClient (AWS Java SDK :: Services :: AWS Batch 2.18.28 API)

All Superinterfaces:

AutoCloseable, SdkAutoCloseable, SdkClient
```
@Generated(value="software.amazon.awssdk:codegen")
 @ThreadSafe
public interface BatchClient
extends SdkClient
```
Service client for accessing AWS Batch. This can be created using the static builder() method. Batch
Using Batch, you can run batch computing workloads on the Amazon Web Services Cloud. Batch computing is a common means for developers, scientists, and engineers to access large amounts of compute resources. Batch uses the advantages of the batch computing to remove the undifferentiated heavy lifting of configuring and managing required infrastructure. At the same time, it also adopts a familiar batch computing software approach. You can use Batch to efficiently provision resources d, and work toward eliminating capacity constraints, reducing your overall compute costs, and delivering results more quickly.

As a fully managed service, Batch can run batch computing workloads of any scale. Batch automatically provisions compute resources and optimizes workload distribution based on the quantity and scale of your specific workloads. With Batch, there's no need to install or manage batch computing software. This means that you can focus on analyzing results and solving your specific problems instead.

Field Summary

Fields
Modifier and Type Field and Description

static String SERVICE_METADATA_ID
Value for looking up the service's metadata from the ServiceMetadataProvider.

static String SERVICE_NAME

Fields
Modifier and Type	Field and Description
`static String`	`SERVICE_METADATA_ID` Value for looking up the service's metadata from the `ServiceMetadataProvider`.
`static String`	`SERVICE_NAME`

Method Summary

All Methods Static Methods Instance Methods Default Methods
Modifier and Type	Method and Description
`static BatchClientBuilder`	`builder()` Create a builder that can be used to configure and create a `BatchClient`.
`default CancelJobResponse`	`cancelJob(CancelJobRequest cancelJobRequest)` Cancels a job in an Batch job queue.
`default CancelJobResponse`	`cancelJob(Consumer<CancelJobRequest.Builder> cancelJobRequest)` Cancels a job in an Batch job queue.
`static BatchClient`	`create()` Create a `BatchClient` with the region loaded from the `DefaultAwsRegionProviderChain` and credentials loaded from the `DefaultCredentialsProvider`.
`default CreateComputeEnvironmentResponse`	`createComputeEnvironment(Consumer<CreateComputeEnvironmentRequest.Builder> createComputeEnvironmentRequest)` Creates an Batch compute environment.
`default CreateComputeEnvironmentResponse`	`createComputeEnvironment(CreateComputeEnvironmentRequest createComputeEnvironmentRequest)` Creates an Batch compute environment.
`default CreateJobQueueResponse`	`createJobQueue(Consumer<CreateJobQueueRequest.Builder> createJobQueueRequest)` Creates an Batch job queue.
`default CreateJobQueueResponse`	`createJobQueue(CreateJobQueueRequest createJobQueueRequest)` Creates an Batch job queue.
`default CreateSchedulingPolicyResponse`	`createSchedulingPolicy(Consumer<CreateSchedulingPolicyRequest.Builder> createSchedulingPolicyRequest)` Creates an Batch scheduling policy.
`default CreateSchedulingPolicyResponse`	`createSchedulingPolicy(CreateSchedulingPolicyRequest createSchedulingPolicyRequest)` Creates an Batch scheduling policy.
`default DeleteComputeEnvironmentResponse`	`deleteComputeEnvironment(Consumer<DeleteComputeEnvironmentRequest.Builder> deleteComputeEnvironmentRequest)` Deletes an Batch compute environment.
`default DeleteComputeEnvironmentResponse`	`deleteComputeEnvironment(DeleteComputeEnvironmentRequest deleteComputeEnvironmentRequest)` Deletes an Batch compute environment.
`default DeleteJobQueueResponse`	`deleteJobQueue(Consumer<DeleteJobQueueRequest.Builder> deleteJobQueueRequest)` Deletes the specified job queue.
`default DeleteJobQueueResponse`	`deleteJobQueue(DeleteJobQueueRequest deleteJobQueueRequest)` Deletes the specified job queue.
`default DeleteSchedulingPolicyResponse`	`deleteSchedulingPolicy(Consumer<DeleteSchedulingPolicyRequest.Builder> deleteSchedulingPolicyRequest)` Deletes the specified scheduling policy.
`default DeleteSchedulingPolicyResponse`	`deleteSchedulingPolicy(DeleteSchedulingPolicyRequest deleteSchedulingPolicyRequest)` Deletes the specified scheduling policy.
`default DeregisterJobDefinitionResponse`	`deregisterJobDefinition(Consumer<DeregisterJobDefinitionRequest.Builder> deregisterJobDefinitionRequest)` Deregisters an Batch job definition.
`default DeregisterJobDefinitionResponse`	`deregisterJobDefinition(DeregisterJobDefinitionRequest deregisterJobDefinitionRequest)` Deregisters an Batch job definition.
`default DescribeComputeEnvironmentsResponse`	`describeComputeEnvironments()` Describes one or more of your compute environments.
`default DescribeComputeEnvironmentsResponse`	`describeComputeEnvironments(Consumer<DescribeComputeEnvironmentsRequest.Builder> describeComputeEnvironmentsRequest)` Describes one or more of your compute environments.
`default DescribeComputeEnvironmentsResponse`	`describeComputeEnvironments(DescribeComputeEnvironmentsRequest describeComputeEnvironmentsRequest)` Describes one or more of your compute environments.
`default DescribeComputeEnvironmentsIterable`	`describeComputeEnvironmentsPaginator()` Describes one or more of your compute environments.
`default DescribeComputeEnvironmentsIterable`	`describeComputeEnvironmentsPaginator(Consumer<DescribeComputeEnvironmentsRequest.Builder> describeComputeEnvironmentsRequest)` Describes one or more of your compute environments.
`default DescribeComputeEnvironmentsIterable`	`describeComputeEnvironmentsPaginator(DescribeComputeEnvironmentsRequest describeComputeEnvironmentsRequest)` Describes one or more of your compute environments.
`default DescribeJobDefinitionsResponse`	`describeJobDefinitions()` Describes a list of job definitions.
`default DescribeJobDefinitionsResponse`	`describeJobDefinitions(Consumer<DescribeJobDefinitionsRequest.Builder> describeJobDefinitionsRequest)` Describes a list of job definitions.
`default DescribeJobDefinitionsResponse`	`describeJobDefinitions(DescribeJobDefinitionsRequest describeJobDefinitionsRequest)` Describes a list of job definitions.
`default DescribeJobDefinitionsIterable`	`describeJobDefinitionsPaginator()` Describes a list of job definitions.
`default DescribeJobDefinitionsIterable`	`describeJobDefinitionsPaginator(Consumer<DescribeJobDefinitionsRequest.Builder> describeJobDefinitionsRequest)` Describes a list of job definitions.
`default DescribeJobDefinitionsIterable`	`describeJobDefinitionsPaginator(DescribeJobDefinitionsRequest describeJobDefinitionsRequest)` Describes a list of job definitions.
`default DescribeJobQueuesResponse`	`describeJobQueues()` Describes one or more of your job queues.
`default DescribeJobQueuesResponse`	`describeJobQueues(Consumer<DescribeJobQueuesRequest.Builder> describeJobQueuesRequest)` Describes one or more of your job queues.
`default DescribeJobQueuesResponse`	`describeJobQueues(DescribeJobQueuesRequest describeJobQueuesRequest)` Describes one or more of your job queues.
`default DescribeJobQueuesIterable`	`describeJobQueuesPaginator()` Describes one or more of your job queues.
`default DescribeJobQueuesIterable`	`describeJobQueuesPaginator(Consumer<DescribeJobQueuesRequest.Builder> describeJobQueuesRequest)` Describes one or more of your job queues.
`default DescribeJobQueuesIterable`	`describeJobQueuesPaginator(DescribeJobQueuesRequest describeJobQueuesRequest)` Describes one or more of your job queues.
`default DescribeJobsResponse`	`describeJobs(Consumer<DescribeJobsRequest.Builder> describeJobsRequest)` Describes a list of Batch jobs.
`default DescribeJobsResponse`	`describeJobs(DescribeJobsRequest describeJobsRequest)` Describes a list of Batch jobs.
`default DescribeSchedulingPoliciesResponse`	`describeSchedulingPolicies(Consumer<DescribeSchedulingPoliciesRequest.Builder> describeSchedulingPoliciesRequest)` Describes one or more of your scheduling policies.
`default DescribeSchedulingPoliciesResponse`	`describeSchedulingPolicies(DescribeSchedulingPoliciesRequest describeSchedulingPoliciesRequest)` Describes one or more of your scheduling policies.
`default ListJobsResponse`	`listJobs(Consumer<ListJobsRequest.Builder> listJobsRequest)` Returns a list of Batch jobs.
`default ListJobsResponse`	`listJobs(ListJobsRequest listJobsRequest)` Returns a list of Batch jobs.
`default ListJobsIterable`	`listJobsPaginator(Consumer<ListJobsRequest.Builder> listJobsRequest)` Returns a list of Batch jobs.
`default ListJobsIterable`	`listJobsPaginator(ListJobsRequest listJobsRequest)` Returns a list of Batch jobs.
`default ListSchedulingPoliciesResponse`	`listSchedulingPolicies(Consumer<ListSchedulingPoliciesRequest.Builder> listSchedulingPoliciesRequest)` Returns a list of Batch scheduling policies.
`default ListSchedulingPoliciesResponse`	`listSchedulingPolicies(ListSchedulingPoliciesRequest listSchedulingPoliciesRequest)` Returns a list of Batch scheduling policies.
`default ListSchedulingPoliciesIterable`	`listSchedulingPoliciesPaginator(Consumer<ListSchedulingPoliciesRequest.Builder> listSchedulingPoliciesRequest)` Returns a list of Batch scheduling policies.
`default ListSchedulingPoliciesIterable`	`listSchedulingPoliciesPaginator(ListSchedulingPoliciesRequest listSchedulingPoliciesRequest)` Returns a list of Batch scheduling policies.
`default ListTagsForResourceResponse`	`listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)` Lists the tags for an Batch resource.
`default ListTagsForResourceResponse`	`listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)` Lists the tags for an Batch resource.
`default RegisterJobDefinitionResponse`	`registerJobDefinition(Consumer<RegisterJobDefinitionRequest.Builder> registerJobDefinitionRequest)` Registers an Batch job definition.
`default RegisterJobDefinitionResponse`	`registerJobDefinition(RegisterJobDefinitionRequest registerJobDefinitionRequest)` Registers an Batch job definition.
`static ServiceMetadata`	`serviceMetadata()`
`default SubmitJobResponse`	`submitJob(Consumer<SubmitJobRequest.Builder> submitJobRequest)` Submits an Batch job from a job definition.
`default SubmitJobResponse`	`submitJob(SubmitJobRequest submitJobRequest)` Submits an Batch job from a job definition.
`default TagResourceResponse`	`tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)` Associates the specified tags to a resource with the specified `resourceArn`.
`default TagResourceResponse`	`tagResource(TagResourceRequest tagResourceRequest)` Associates the specified tags to a resource with the specified `resourceArn`.
`default TerminateJobResponse`	`terminateJob(Consumer<TerminateJobRequest.Builder> terminateJobRequest)` Terminates a job in a job queue.
`default TerminateJobResponse`	`terminateJob(TerminateJobRequest terminateJobRequest)` Terminates a job in a job queue.
`default UntagResourceResponse`	`untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)` Deletes specified tags from an Batch resource.
`default UntagResourceResponse`	`untagResource(UntagResourceRequest untagResourceRequest)` Deletes specified tags from an Batch resource.
`default UpdateComputeEnvironmentResponse`	`updateComputeEnvironment(Consumer<UpdateComputeEnvironmentRequest.Builder> updateComputeEnvironmentRequest)` Updates an Batch compute environment.
`default UpdateComputeEnvironmentResponse`	`updateComputeEnvironment(UpdateComputeEnvironmentRequest updateComputeEnvironmentRequest)` Updates an Batch compute environment.
`default UpdateJobQueueResponse`	`updateJobQueue(Consumer<UpdateJobQueueRequest.Builder> updateJobQueueRequest)` Updates a job queue.
`default UpdateJobQueueResponse`	`updateJobQueue(UpdateJobQueueRequest updateJobQueueRequest)` Updates a job queue.
`default UpdateSchedulingPolicyResponse`	`updateSchedulingPolicy(Consumer<UpdateSchedulingPolicyRequest.Builder> updateSchedulingPolicyRequest)` Updates a scheduling policy.
`default UpdateSchedulingPolicyResponse`	`updateSchedulingPolicy(UpdateSchedulingPolicyRequest updateSchedulingPolicyRequest)` Updates a scheduling policy.

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

- Field Detail
  - SERVICE_NAME
```
static final String SERVICE_NAME
```
    See Also:
    
    Constant Field Values
  - SERVICE_METADATA_ID
```
static final String SERVICE_METADATA_ID
```
    Value for looking up the service's metadata from the ServiceMetadataProvider.
    
    See Also:
    
    Constant Field Values
- Method Detail
  - create
```
static BatchClient create()
```
    Create a BatchClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
  - builder
```
static BatchClientBuilder builder()
```
    Create a builder that can be used to configure and create a BatchClient.
  - cancelJob
```
default CancelJobResponse cancelJob(CancelJobRequest cancelJobRequest)
                             throws ClientException,
                                    ServerException,
                                    AwsServiceException,
                                    SdkClientException,
                                    BatchException
```
    Cancels a job in an Batch job queue. Jobs that are in the SUBMITTED, PENDING, or RUNNABLE state are canceled. Jobs that progressed to the STARTING or RUNNING state aren't canceled. However, the API operation still succeeds, even if no job is canceled. These jobs must be terminated with the TerminateJob operation.
    
    Parameters:
    
    cancelJobRequest - Contains the parameters for CancelJob.
    
    Returns:
    
    Result of the CancelJob operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - cancelJob
```
default CancelJobResponse cancelJob(Consumer<CancelJobRequest.Builder> cancelJobRequest)
                             throws ClientException,
                                    ServerException,
                                    AwsServiceException,
                                    SdkClientException,
                                    BatchException
```
    Cancels a job in an Batch job queue. Jobs that are in the SUBMITTED, PENDING, or RUNNABLE state are canceled. Jobs that progressed to the STARTING or RUNNING state aren't canceled. However, the API operation still succeeds, even if no job is canceled. These jobs must be terminated with the TerminateJob operation.
    
    This is a convenience which creates an instance of the CancelJobRequest.Builder avoiding the need to create one manually via CancelJobRequest.builder()
    
    Parameters:
    
    cancelJobRequest - A Consumer that will call methods on CancelJobRequest.Builder to create a request. Contains the parameters for CancelJob.
    
    Returns:
    
    Result of the CancelJob operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createComputeEnvironment
```
default CreateComputeEnvironmentResponse createComputeEnvironment(CreateComputeEnvironmentRequest createComputeEnvironmentRequest)
                                                           throws ClientException,
                                                                  ServerException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  BatchException
```
    Creates an Batch compute environment. You can create MANAGED or UNMANAGED compute environments. MANAGED compute environments can use Amazon EC2 or Fargate resources. UNMANAGED compute environments can only use EC2 resources.
    
    In a managed compute environment, Batch manages the capacity and instance types of the compute resources within the environment. This is based on the compute resource specification that you define or the launch template that you specify when you create the compute environment. Either, you can choose to use EC2 On-Demand Instances and EC2 Spot Instances. Or, you can use Fargate and Fargate Spot capacity in your managed compute environment. You can optionally set a maximum price so that Spot Instances only launch when the Spot Instance price is less than a specified percentage of the On-Demand price.
    
    Multi-node parallel jobs aren't supported on Spot Instances.
    
    In an unmanaged compute environment, you can manage your own EC2 compute resources and have flexibility with how you configure your compute resources. For example, you can use custom AMIs. However, you must verify that each of your AMIs meet the Amazon ECS container instance AMI specification. For more information, see container instance AMIs in the Amazon Elastic Container Service Developer Guide. After you created your unmanaged compute environment, you can use the DescribeComputeEnvironments operation to find the Amazon ECS cluster that's associated with it. Then, launch your container instances into that Amazon ECS cluster. For more information, see Launching an Amazon ECS container instance in the Amazon Elastic Container Service Developer Guide.
    
    To create a compute environment that uses EKS resources, the caller must have permissions to call eks:DescribeCluster.
    Batch doesn't automatically upgrade the AMIs in a compute environment after it's created. For example, it also doesn't update the AMIs in your compute environment when a newer version of the Amazon ECS optimized AMI is available. You're responsible for the management of the guest operating system. This includes any updates and security patches. You're also responsible for any additional application software or utilities that you install on the compute resources. There are two ways to use a new AMI for your Batch jobs. The original method is to complete these steps:
    
    Create a new compute environment with the new AMI.
    
    Add the compute environment to an existing job queue.
    
    Remove the earlier compute environment from your job queue.
    
    Delete the earlier compute environment.
    
    In April 2022, Batch added enhanced support for updating compute environments. For more information, see Updating compute environments. To use the enhanced updating of compute environments to update AMIs, follow these rules:
    
    Either don't set the service role (serviceRole) parameter or set it to the AWSBatchServiceRole service-linked role.
    
    Set the allocation strategy (allocationStrategy) parameter to BEST_FIT_PROGRESSIVE or SPOT_CAPACITY_OPTIMIZED.
    
    Set the update to latest image version (updateToLatestImageVersion) parameter to true.
    
    Don't specify an AMI ID in imageId, imageIdOverride (in ec2Configuration ), or in the launch template (launchTemplate). In that case, Batch selects the latest Amazon ECS optimized AMI that's supported by Batch at the time the infrastructure update is initiated. Alternatively, you can specify the AMI ID in the imageId or imageIdOverride parameters, or the launch template identified by the LaunchTemplate properties. Changing any of these properties starts an infrastructure update. If the AMI ID is specified in the launch template, it can't be replaced by specifying an AMI ID in either the imageId or imageIdOverride parameters. It can only be replaced by specifying a different launch template, or if the launch template version is set to $Default or $Latest, by setting either a new default version for the launch template (if $Default) or by adding a new version to the launch template (if $Latest).
    
    If these rules are followed, any update that starts an infrastructure update causes the AMI ID to be re-selected. If the version setting in the launch template (launchTemplate) is set to $Latest or $Default, the latest or default version of the launch template is evaluated up at the time of the infrastructure update, even if the launchTemplate wasn't updated.
    Parameters:
    
    createComputeEnvironmentRequest - Contains the parameters for CreateComputeEnvironment.
    
    Returns:
    
    Result of the CreateComputeEnvironment operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createComputeEnvironment
```
default CreateComputeEnvironmentResponse createComputeEnvironment(Consumer<CreateComputeEnvironmentRequest.Builder> createComputeEnvironmentRequest)
                                                           throws ClientException,
                                                                  ServerException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  BatchException
```
    Creates an Batch compute environment. You can create MANAGED or UNMANAGED compute environments. MANAGED compute environments can use Amazon EC2 or Fargate resources. UNMANAGED compute environments can only use EC2 resources.
    
    In a managed compute environment, Batch manages the capacity and instance types of the compute resources within the environment. This is based on the compute resource specification that you define or the launch template that you specify when you create the compute environment. Either, you can choose to use EC2 On-Demand Instances and EC2 Spot Instances. Or, you can use Fargate and Fargate Spot capacity in your managed compute environment. You can optionally set a maximum price so that Spot Instances only launch when the Spot Instance price is less than a specified percentage of the On-Demand price.
    
    Multi-node parallel jobs aren't supported on Spot Instances.
    
    In an unmanaged compute environment, you can manage your own EC2 compute resources and have flexibility with how you configure your compute resources. For example, you can use custom AMIs. However, you must verify that each of your AMIs meet the Amazon ECS container instance AMI specification. For more information, see container instance AMIs in the Amazon Elastic Container Service Developer Guide. After you created your unmanaged compute environment, you can use the DescribeComputeEnvironments operation to find the Amazon ECS cluster that's associated with it. Then, launch your container instances into that Amazon ECS cluster. For more information, see Launching an Amazon ECS container instance in the Amazon Elastic Container Service Developer Guide.
    
    To create a compute environment that uses EKS resources, the caller must have permissions to call eks:DescribeCluster.
    Batch doesn't automatically upgrade the AMIs in a compute environment after it's created. For example, it also doesn't update the AMIs in your compute environment when a newer version of the Amazon ECS optimized AMI is available. You're responsible for the management of the guest operating system. This includes any updates and security patches. You're also responsible for any additional application software or utilities that you install on the compute resources. There are two ways to use a new AMI for your Batch jobs. The original method is to complete these steps:
    
    Create a new compute environment with the new AMI.
    
    Add the compute environment to an existing job queue.
    
    Remove the earlier compute environment from your job queue.
    
    Delete the earlier compute environment.
    
    In April 2022, Batch added enhanced support for updating compute environments. For more information, see Updating compute environments. To use the enhanced updating of compute environments to update AMIs, follow these rules:
    
    Either don't set the service role (serviceRole) parameter or set it to the AWSBatchServiceRole service-linked role.
    
    Set the allocation strategy (allocationStrategy) parameter to BEST_FIT_PROGRESSIVE or SPOT_CAPACITY_OPTIMIZED.
    
    Set the update to latest image version (updateToLatestImageVersion) parameter to true.
    
    Don't specify an AMI ID in imageId, imageIdOverride (in ec2Configuration ), or in the launch template (launchTemplate). In that case, Batch selects the latest Amazon ECS optimized AMI that's supported by Batch at the time the infrastructure update is initiated. Alternatively, you can specify the AMI ID in the imageId or imageIdOverride parameters, or the launch template identified by the LaunchTemplate properties. Changing any of these properties starts an infrastructure update. If the AMI ID is specified in the launch template, it can't be replaced by specifying an AMI ID in either the imageId or imageIdOverride parameters. It can only be replaced by specifying a different launch template, or if the launch template version is set to $Default or $Latest, by setting either a new default version for the launch template (if $Default) or by adding a new version to the launch template (if $Latest).
    
    If these rules are followed, any update that starts an infrastructure update causes the AMI ID to be re-selected. If the version setting in the launch template (launchTemplate) is set to $Latest or $Default, the latest or default version of the launch template is evaluated up at the time of the infrastructure update, even if the launchTemplate wasn't updated.
    This is a convenience which creates an instance of the CreateComputeEnvironmentRequest.Builder avoiding the need to create one manually via CreateComputeEnvironmentRequest.builder()
    Parameters:
    
    createComputeEnvironmentRequest - A Consumer that will call methods on CreateComputeEnvironmentRequest.Builder to create a request. Contains the parameters for CreateComputeEnvironment.
    
    Returns:
    
    Result of the CreateComputeEnvironment operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createJobQueue
```
default CreateJobQueueResponse createJobQueue(CreateJobQueueRequest createJobQueueRequest)
                                       throws ClientException,
                                              ServerException,
                                              AwsServiceException,
                                              SdkClientException,
                                              BatchException
```
    Creates an Batch job queue. When you create a job queue, you associate one or more compute environments to the queue and assign an order of preference for the compute environments.
    
    You also set a priority to the job queue that determines the order that the Batch scheduler places jobs onto its associated compute environments. For example, if a compute environment is associated with more than one job queue, the job queue with a higher priority is given preference for scheduling jobs to that compute environment.
    
    Parameters:
    
    createJobQueueRequest - Contains the parameters for CreateJobQueue.
    
    Returns:
    
    Result of the CreateJobQueue operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createJobQueue
```
default CreateJobQueueResponse createJobQueue(Consumer<CreateJobQueueRequest.Builder> createJobQueueRequest)
                                       throws ClientException,
                                              ServerException,
                                              AwsServiceException,
                                              SdkClientException,
                                              BatchException
```
    Creates an Batch job queue. When you create a job queue, you associate one or more compute environments to the queue and assign an order of preference for the compute environments.
    
    You also set a priority to the job queue that determines the order that the Batch scheduler places jobs onto its associated compute environments. For example, if a compute environment is associated with more than one job queue, the job queue with a higher priority is given preference for scheduling jobs to that compute environment.
    
    This is a convenience which creates an instance of the CreateJobQueueRequest.Builder avoiding the need to create one manually via CreateJobQueueRequest.builder()
    
    Parameters:
    
    createJobQueueRequest - A Consumer that will call methods on CreateJobQueueRequest.Builder to create a request. Contains the parameters for CreateJobQueue.
    
    Returns:
    
    Result of the CreateJobQueue operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createSchedulingPolicy
```
default CreateSchedulingPolicyResponse createSchedulingPolicy(CreateSchedulingPolicyRequest createSchedulingPolicyRequest)
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Creates an Batch scheduling policy.
    
    Parameters:
    
    createSchedulingPolicyRequest - Contains the parameters for CreateSchedulingPolicy.
    
    Returns:
    
    Result of the CreateSchedulingPolicy operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createSchedulingPolicy
```
default CreateSchedulingPolicyResponse createSchedulingPolicy(Consumer<CreateSchedulingPolicyRequest.Builder> createSchedulingPolicyRequest)
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Creates an Batch scheduling policy.
    
    This is a convenience which creates an instance of the CreateSchedulingPolicyRequest.Builder avoiding the need to create one manually via CreateSchedulingPolicyRequest.builder()
    
    Parameters:
    
    createSchedulingPolicyRequest - A Consumer that will call methods on CreateSchedulingPolicyRequest.Builder to create a request. Contains the parameters for CreateSchedulingPolicy.
    
    Returns:
    
    Result of the CreateSchedulingPolicy operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteComputeEnvironment
```
default DeleteComputeEnvironmentResponse deleteComputeEnvironment(DeleteComputeEnvironmentRequest deleteComputeEnvironmentRequest)
                                                           throws ClientException,
                                                                  ServerException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  BatchException
```
    Deletes an Batch compute environment.
    
    Before you can delete a compute environment, you must set its state to DISABLED with the UpdateComputeEnvironment API operation and disassociate it from any job queues with the UpdateJobQueue API operation. Compute environments that use Fargate resources must terminate all active jobs on that compute environment before deleting the compute environment. If this isn't done, the compute environment enters an invalid state.
    
    Parameters:
    
    deleteComputeEnvironmentRequest - Contains the parameters for DeleteComputeEnvironment.
    
    Returns:
    
    Result of the DeleteComputeEnvironment operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteComputeEnvironment
```
default DeleteComputeEnvironmentResponse deleteComputeEnvironment(Consumer<DeleteComputeEnvironmentRequest.Builder> deleteComputeEnvironmentRequest)
                                                           throws ClientException,
                                                                  ServerException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  BatchException
```
    Deletes an Batch compute environment.
    
    Before you can delete a compute environment, you must set its state to DISABLED with the UpdateComputeEnvironment API operation and disassociate it from any job queues with the UpdateJobQueue API operation. Compute environments that use Fargate resources must terminate all active jobs on that compute environment before deleting the compute environment. If this isn't done, the compute environment enters an invalid state.
    
    This is a convenience which creates an instance of the DeleteComputeEnvironmentRequest.Builder avoiding the need to create one manually via DeleteComputeEnvironmentRequest.builder()
    
    Parameters:
    
    deleteComputeEnvironmentRequest - A Consumer that will call methods on DeleteComputeEnvironmentRequest.Builder to create a request. Contains the parameters for DeleteComputeEnvironment.
    
    Returns:
    
    Result of the DeleteComputeEnvironment operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteJobQueue
```
default DeleteJobQueueResponse deleteJobQueue(DeleteJobQueueRequest deleteJobQueueRequest)
                                       throws ClientException,
                                              ServerException,
                                              AwsServiceException,
                                              SdkClientException,
                                              BatchException
```
    Deletes the specified job queue. You must first disable submissions for a queue with the UpdateJobQueue operation. All jobs in the queue are eventually terminated when you delete a job queue. The jobs are terminated at a rate of about 16 jobs each second.
    
    It's not necessary to disassociate compute environments from a queue before submitting a DeleteJobQueue request.
    
    Parameters:
    
    deleteJobQueueRequest - Contains the parameters for DeleteJobQueue.
    
    Returns:
    
    Result of the DeleteJobQueue operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteJobQueue
```
default DeleteJobQueueResponse deleteJobQueue(Consumer<DeleteJobQueueRequest.Builder> deleteJobQueueRequest)
                                       throws ClientException,
                                              ServerException,
                                              AwsServiceException,
                                              SdkClientException,
                                              BatchException
```
    Deletes the specified job queue. You must first disable submissions for a queue with the UpdateJobQueue operation. All jobs in the queue are eventually terminated when you delete a job queue. The jobs are terminated at a rate of about 16 jobs each second.
    
    It's not necessary to disassociate compute environments from a queue before submitting a DeleteJobQueue request.
    
    This is a convenience which creates an instance of the DeleteJobQueueRequest.Builder avoiding the need to create one manually via DeleteJobQueueRequest.builder()
    
    Parameters:
    
    deleteJobQueueRequest - A Consumer that will call methods on DeleteJobQueueRequest.Builder to create a request. Contains the parameters for DeleteJobQueue.
    
    Returns:
    
    Result of the DeleteJobQueue operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteSchedulingPolicy
```
default DeleteSchedulingPolicyResponse deleteSchedulingPolicy(DeleteSchedulingPolicyRequest deleteSchedulingPolicyRequest)
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Deletes the specified scheduling policy.
    
    You can't delete a scheduling policy that's used in any job queues.
    
    Parameters:
    
    deleteSchedulingPolicyRequest - Contains the parameters for DeleteSchedulingPolicy.
    
    Returns:
    
    Result of the DeleteSchedulingPolicy operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteSchedulingPolicy
```
default DeleteSchedulingPolicyResponse deleteSchedulingPolicy(Consumer<DeleteSchedulingPolicyRequest.Builder> deleteSchedulingPolicyRequest)
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Deletes the specified scheduling policy.
    
    You can't delete a scheduling policy that's used in any job queues.
    
    This is a convenience which creates an instance of the DeleteSchedulingPolicyRequest.Builder avoiding the need to create one manually via DeleteSchedulingPolicyRequest.builder()
    
    Parameters:
    
    deleteSchedulingPolicyRequest - A Consumer that will call methods on DeleteSchedulingPolicyRequest.Builder to create a request. Contains the parameters for DeleteSchedulingPolicy.
    
    Returns:
    
    Result of the DeleteSchedulingPolicy operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deregisterJobDefinition
```
default DeregisterJobDefinitionResponse deregisterJobDefinition(DeregisterJobDefinitionRequest deregisterJobDefinitionRequest)
                                                         throws ClientException,
                                                                ServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                BatchException
```
    Deregisters an Batch job definition. Job definitions are permanently deleted after 180 days.
    
    Parameters:
    
    deregisterJobDefinitionRequest -
    
    Returns:
    
    Result of the DeregisterJobDefinition operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deregisterJobDefinition
```
default DeregisterJobDefinitionResponse deregisterJobDefinition(Consumer<DeregisterJobDefinitionRequest.Builder> deregisterJobDefinitionRequest)
                                                         throws ClientException,
                                                                ServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                BatchException
```
    Deregisters an Batch job definition. Job definitions are permanently deleted after 180 days.
    
    This is a convenience which creates an instance of the DeregisterJobDefinitionRequest.Builder avoiding the need to create one manually via DeregisterJobDefinitionRequest.builder()
    
    Parameters:
    
    deregisterJobDefinitionRequest - A Consumer that will call methods on DeregisterJobDefinitionRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeregisterJobDefinition operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeComputeEnvironments
```
default DescribeComputeEnvironmentsResponse describeComputeEnvironments()
                                                                 throws ClientException,
                                                                        ServerException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        BatchException
```
    Describes one or more of your compute environments.
    
    If you're using an unmanaged compute environment, you can use the DescribeComputeEnvironment operation to determine the ecsClusterArn that you launch your Amazon ECS container instances into.
    
    Returns:
    
    Result of the DescribeComputeEnvironments operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    describeComputeEnvironments(DescribeComputeEnvironmentsRequest), AWS API Documentation
  - describeComputeEnvironments
```
default DescribeComputeEnvironmentsResponse describeComputeEnvironments(DescribeComputeEnvironmentsRequest describeComputeEnvironmentsRequest)
                                                                 throws ClientException,
                                                                        ServerException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        BatchException
```
    Describes one or more of your compute environments.
    
    If you're using an unmanaged compute environment, you can use the DescribeComputeEnvironment operation to determine the ecsClusterArn that you launch your Amazon ECS container instances into.
    
    Parameters:
    
    describeComputeEnvironmentsRequest - Contains the parameters for DescribeComputeEnvironments.
    
    Returns:
    
    Result of the DescribeComputeEnvironments operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeComputeEnvironments
```
default DescribeComputeEnvironmentsResponse describeComputeEnvironments(Consumer<DescribeComputeEnvironmentsRequest.Builder> describeComputeEnvironmentsRequest)
                                                                 throws ClientException,
                                                                        ServerException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        BatchException
```
    Describes one or more of your compute environments.
    
    If you're using an unmanaged compute environment, you can use the DescribeComputeEnvironment operation to determine the ecsClusterArn that you launch your Amazon ECS container instances into.
    
    This is a convenience which creates an instance of the DescribeComputeEnvironmentsRequest.Builder avoiding the need to create one manually via DescribeComputeEnvironmentsRequest.builder()
    
    Parameters:
    
    describeComputeEnvironmentsRequest - A Consumer that will call methods on DescribeComputeEnvironmentsRequest.Builder to create a request. Contains the parameters for DescribeComputeEnvironments.
    
    Returns:
    
    Result of the DescribeComputeEnvironments operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeComputeEnvironmentsPaginator
```
default DescribeComputeEnvironmentsIterable describeComputeEnvironmentsPaginator()
                                                                          throws ClientException,
                                                                                 ServerException,
                                                                                 AwsServiceException,
                                                                                 SdkClientException,
                                                                                 BatchException
```
    Describes one or more of your compute environments.
    
    If you're using an unmanaged compute environment, you can use the DescribeComputeEnvironment operation to determine the ecsClusterArn that you launch your Amazon ECS container instances into.
    
    This is a variant of describeComputeEnvironments(software.amazon.awssdk.services.batch.model.DescribeComputeEnvironmentsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeComputeEnvironmentsIterable responses = client.describeComputeEnvironmentsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.DescribeComputeEnvironmentsIterable responses = client
             .describeComputeEnvironmentsPaginator(request);
     for (software.amazon.awssdk.services.batch.model.DescribeComputeEnvironmentsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeComputeEnvironmentsIterable responses = client.describeComputeEnvironmentsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeComputeEnvironments(software.amazon.awssdk.services.batch.model.DescribeComputeEnvironmentsRequest) operation.
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    describeComputeEnvironmentsPaginator(DescribeComputeEnvironmentsRequest), AWS API Documentation
  - describeComputeEnvironmentsPaginator
```
default DescribeComputeEnvironmentsIterable describeComputeEnvironmentsPaginator(DescribeComputeEnvironmentsRequest describeComputeEnvironmentsRequest)
                                                                          throws ClientException,
                                                                                 ServerException,
                                                                                 AwsServiceException,
                                                                                 SdkClientException,
                                                                                 BatchException
```
    Describes one or more of your compute environments.
    
    If you're using an unmanaged compute environment, you can use the DescribeComputeEnvironment operation to determine the ecsClusterArn that you launch your Amazon ECS container instances into.
    
    This is a variant of describeComputeEnvironments(software.amazon.awssdk.services.batch.model.DescribeComputeEnvironmentsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeComputeEnvironmentsIterable responses = client.describeComputeEnvironmentsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.DescribeComputeEnvironmentsIterable responses = client
             .describeComputeEnvironmentsPaginator(request);
     for (software.amazon.awssdk.services.batch.model.DescribeComputeEnvironmentsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeComputeEnvironmentsIterable responses = client.describeComputeEnvironmentsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeComputeEnvironments(software.amazon.awssdk.services.batch.model.DescribeComputeEnvironmentsRequest) operation.
    Parameters:
    
    describeComputeEnvironmentsRequest - Contains the parameters for DescribeComputeEnvironments.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeComputeEnvironmentsPaginator
```
default DescribeComputeEnvironmentsIterable describeComputeEnvironmentsPaginator(Consumer<DescribeComputeEnvironmentsRequest.Builder> describeComputeEnvironmentsRequest)
                                                                          throws ClientException,
                                                                                 ServerException,
                                                                                 AwsServiceException,
                                                                                 SdkClientException,
                                                                                 BatchException
```
    Describes one or more of your compute environments.
    
    If you're using an unmanaged compute environment, you can use the DescribeComputeEnvironment operation to determine the ecsClusterArn that you launch your Amazon ECS container instances into.
    
    This is a variant of describeComputeEnvironments(software.amazon.awssdk.services.batch.model.DescribeComputeEnvironmentsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeComputeEnvironmentsIterable responses = client.describeComputeEnvironmentsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.DescribeComputeEnvironmentsIterable responses = client
             .describeComputeEnvironmentsPaginator(request);
     for (software.amazon.awssdk.services.batch.model.DescribeComputeEnvironmentsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeComputeEnvironmentsIterable responses = client.describeComputeEnvironmentsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeComputeEnvironments(software.amazon.awssdk.services.batch.model.DescribeComputeEnvironmentsRequest) operation.
    
    This is a convenience which creates an instance of the DescribeComputeEnvironmentsRequest.Builder avoiding the need to create one manually via DescribeComputeEnvironmentsRequest.builder()
    Parameters:
    
    describeComputeEnvironmentsRequest - A Consumer that will call methods on DescribeComputeEnvironmentsRequest.Builder to create a request. Contains the parameters for DescribeComputeEnvironments.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeJobDefinitions
```
default DescribeJobDefinitionsResponse describeJobDefinitions()
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Describes a list of job definitions. You can specify a status (such as ACTIVE) to only return job definitions that match that status.
    
    Returns:
    
    Result of the DescribeJobDefinitions operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    describeJobDefinitions(DescribeJobDefinitionsRequest), AWS API Documentation
  - describeJobDefinitions
```
default DescribeJobDefinitionsResponse describeJobDefinitions(DescribeJobDefinitionsRequest describeJobDefinitionsRequest)
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Describes a list of job definitions. You can specify a status (such as ACTIVE) to only return job definitions that match that status.
    
    Parameters:
    
    describeJobDefinitionsRequest - Contains the parameters for DescribeJobDefinitions.
    
    Returns:
    
    Result of the DescribeJobDefinitions operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeJobDefinitions
```
default DescribeJobDefinitionsResponse describeJobDefinitions(Consumer<DescribeJobDefinitionsRequest.Builder> describeJobDefinitionsRequest)
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Describes a list of job definitions. You can specify a status (such as ACTIVE) to only return job definitions that match that status.
    
    This is a convenience which creates an instance of the DescribeJobDefinitionsRequest.Builder avoiding the need to create one manually via DescribeJobDefinitionsRequest.builder()
    
    Parameters:
    
    describeJobDefinitionsRequest - A Consumer that will call methods on DescribeJobDefinitionsRequest.Builder to create a request. Contains the parameters for DescribeJobDefinitions.
    
    Returns:
    
    Result of the DescribeJobDefinitions operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeJobDefinitionsPaginator
```
default DescribeJobDefinitionsIterable describeJobDefinitionsPaginator()
                                                                throws ClientException,
                                                                       ServerException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       BatchException
```
    Describes a list of job definitions. You can specify a status (such as ACTIVE) to only return job definitions that match that status.
    
    This is a variant of describeJobDefinitions(software.amazon.awssdk.services.batch.model.DescribeJobDefinitionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobDefinitionsIterable responses = client.describeJobDefinitionsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.DescribeJobDefinitionsIterable responses = client
             .describeJobDefinitionsPaginator(request);
     for (software.amazon.awssdk.services.batch.model.DescribeJobDefinitionsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobDefinitionsIterable responses = client.describeJobDefinitionsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeJobDefinitions(software.amazon.awssdk.services.batch.model.DescribeJobDefinitionsRequest) operation.
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    describeJobDefinitionsPaginator(DescribeJobDefinitionsRequest), AWS API Documentation
  - describeJobDefinitionsPaginator
```
default DescribeJobDefinitionsIterable describeJobDefinitionsPaginator(DescribeJobDefinitionsRequest describeJobDefinitionsRequest)
                                                                throws ClientException,
                                                                       ServerException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       BatchException
```
    Describes a list of job definitions. You can specify a status (such as ACTIVE) to only return job definitions that match that status.
    
    This is a variant of describeJobDefinitions(software.amazon.awssdk.services.batch.model.DescribeJobDefinitionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobDefinitionsIterable responses = client.describeJobDefinitionsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.DescribeJobDefinitionsIterable responses = client
             .describeJobDefinitionsPaginator(request);
     for (software.amazon.awssdk.services.batch.model.DescribeJobDefinitionsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobDefinitionsIterable responses = client.describeJobDefinitionsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeJobDefinitions(software.amazon.awssdk.services.batch.model.DescribeJobDefinitionsRequest) operation.
    Parameters:
    
    describeJobDefinitionsRequest - Contains the parameters for DescribeJobDefinitions.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeJobDefinitionsPaginator
```
default DescribeJobDefinitionsIterable describeJobDefinitionsPaginator(Consumer<DescribeJobDefinitionsRequest.Builder> describeJobDefinitionsRequest)
                                                                throws ClientException,
                                                                       ServerException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       BatchException
```
    Describes a list of job definitions. You can specify a status (such as ACTIVE) to only return job definitions that match that status.
    
    This is a variant of describeJobDefinitions(software.amazon.awssdk.services.batch.model.DescribeJobDefinitionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobDefinitionsIterable responses = client.describeJobDefinitionsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.DescribeJobDefinitionsIterable responses = client
             .describeJobDefinitionsPaginator(request);
     for (software.amazon.awssdk.services.batch.model.DescribeJobDefinitionsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobDefinitionsIterable responses = client.describeJobDefinitionsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeJobDefinitions(software.amazon.awssdk.services.batch.model.DescribeJobDefinitionsRequest) operation.
    
    This is a convenience which creates an instance of the DescribeJobDefinitionsRequest.Builder avoiding the need to create one manually via DescribeJobDefinitionsRequest.builder()
    Parameters:
    
    describeJobDefinitionsRequest - A Consumer that will call methods on DescribeJobDefinitionsRequest.Builder to create a request. Contains the parameters for DescribeJobDefinitions.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeJobQueues
```
default DescribeJobQueuesResponse describeJobQueues()
                                             throws ClientException,
                                                    ServerException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    BatchException
```
    Describes one or more of your job queues.
    
    Returns:
    
    Result of the DescribeJobQueues operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    describeJobQueues(DescribeJobQueuesRequest), AWS API Documentation
  - describeJobQueues
```
default DescribeJobQueuesResponse describeJobQueues(DescribeJobQueuesRequest describeJobQueuesRequest)
                                             throws ClientException,
                                                    ServerException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    BatchException
```
    Describes one or more of your job queues.
    
    Parameters:
    
    describeJobQueuesRequest - Contains the parameters for DescribeJobQueues.
    
    Returns:
    
    Result of the DescribeJobQueues operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeJobQueues
```
default DescribeJobQueuesResponse describeJobQueues(Consumer<DescribeJobQueuesRequest.Builder> describeJobQueuesRequest)
                                             throws ClientException,
                                                    ServerException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    BatchException
```
    Describes one or more of your job queues.
    
    This is a convenience which creates an instance of the DescribeJobQueuesRequest.Builder avoiding the need to create one manually via DescribeJobQueuesRequest.builder()
    
    Parameters:
    
    describeJobQueuesRequest - A Consumer that will call methods on DescribeJobQueuesRequest.Builder to create a request. Contains the parameters for DescribeJobQueues.
    
    Returns:
    
    Result of the DescribeJobQueues operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeJobQueuesPaginator
```
default DescribeJobQueuesIterable describeJobQueuesPaginator()
                                                      throws ClientException,
                                                             ServerException,
                                                             AwsServiceException,
                                                             SdkClientException,
                                                             BatchException
```
    Describes one or more of your job queues.
    
    This is a variant of describeJobQueues(software.amazon.awssdk.services.batch.model.DescribeJobQueuesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobQueuesIterable responses = client.describeJobQueuesPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.DescribeJobQueuesIterable responses = client
             .describeJobQueuesPaginator(request);
     for (software.amazon.awssdk.services.batch.model.DescribeJobQueuesResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobQueuesIterable responses = client.describeJobQueuesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeJobQueues(software.amazon.awssdk.services.batch.model.DescribeJobQueuesRequest) operation.
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    describeJobQueuesPaginator(DescribeJobQueuesRequest), AWS API Documentation
  - describeJobQueuesPaginator
```
default DescribeJobQueuesIterable describeJobQueuesPaginator(DescribeJobQueuesRequest describeJobQueuesRequest)
                                                      throws ClientException,
                                                             ServerException,
                                                             AwsServiceException,
                                                             SdkClientException,
                                                             BatchException
```
    Describes one or more of your job queues.
    
    This is a variant of describeJobQueues(software.amazon.awssdk.services.batch.model.DescribeJobQueuesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobQueuesIterable responses = client.describeJobQueuesPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.DescribeJobQueuesIterable responses = client
             .describeJobQueuesPaginator(request);
     for (software.amazon.awssdk.services.batch.model.DescribeJobQueuesResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobQueuesIterable responses = client.describeJobQueuesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeJobQueues(software.amazon.awssdk.services.batch.model.DescribeJobQueuesRequest) operation.
    Parameters:
    
    describeJobQueuesRequest - Contains the parameters for DescribeJobQueues.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeJobQueuesPaginator
```
default DescribeJobQueuesIterable describeJobQueuesPaginator(Consumer<DescribeJobQueuesRequest.Builder> describeJobQueuesRequest)
                                                      throws ClientException,
                                                             ServerException,
                                                             AwsServiceException,
                                                             SdkClientException,
                                                             BatchException
```
    Describes one or more of your job queues.
    
    This is a variant of describeJobQueues(software.amazon.awssdk.services.batch.model.DescribeJobQueuesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobQueuesIterable responses = client.describeJobQueuesPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.DescribeJobQueuesIterable responses = client
             .describeJobQueuesPaginator(request);
     for (software.amazon.awssdk.services.batch.model.DescribeJobQueuesResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.DescribeJobQueuesIterable responses = client.describeJobQueuesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeJobQueues(software.amazon.awssdk.services.batch.model.DescribeJobQueuesRequest) operation.
    
    This is a convenience which creates an instance of the DescribeJobQueuesRequest.Builder avoiding the need to create one manually via DescribeJobQueuesRequest.builder()
    Parameters:
    
    describeJobQueuesRequest - A Consumer that will call methods on DescribeJobQueuesRequest.Builder to create a request. Contains the parameters for DescribeJobQueues.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeJobs
```
default DescribeJobsResponse describeJobs(DescribeJobsRequest describeJobsRequest)
                                   throws ClientException,
                                          ServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          BatchException
```
    Describes a list of Batch jobs.
    
    Parameters:
    
    describeJobsRequest - Contains the parameters for DescribeJobs.
    
    Returns:
    
    Result of the DescribeJobs operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeJobs
```
default DescribeJobsResponse describeJobs(Consumer<DescribeJobsRequest.Builder> describeJobsRequest)
                                   throws ClientException,
                                          ServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          BatchException
```
    Describes a list of Batch jobs.
    
    This is a convenience which creates an instance of the DescribeJobsRequest.Builder avoiding the need to create one manually via DescribeJobsRequest.builder()
    
    Parameters:
    
    describeJobsRequest - A Consumer that will call methods on DescribeJobsRequest.Builder to create a request. Contains the parameters for DescribeJobs.
    
    Returns:
    
    Result of the DescribeJobs operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeSchedulingPolicies
```
default DescribeSchedulingPoliciesResponse describeSchedulingPolicies(DescribeSchedulingPoliciesRequest describeSchedulingPoliciesRequest)
                                                               throws ClientException,
                                                                      ServerException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      BatchException
```
    Describes one or more of your scheduling policies.
    
    Parameters:
    
    describeSchedulingPoliciesRequest - Contains the parameters for DescribeSchedulingPolicies.
    
    Returns:
    
    Result of the DescribeSchedulingPolicies operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeSchedulingPolicies
```
default DescribeSchedulingPoliciesResponse describeSchedulingPolicies(Consumer<DescribeSchedulingPoliciesRequest.Builder> describeSchedulingPoliciesRequest)
                                                               throws ClientException,
                                                                      ServerException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      BatchException
```
    Describes one or more of your scheduling policies.
    
    This is a convenience which creates an instance of the DescribeSchedulingPoliciesRequest.Builder avoiding the need to create one manually via DescribeSchedulingPoliciesRequest.builder()
    
    Parameters:
    
    describeSchedulingPoliciesRequest - A Consumer that will call methods on DescribeSchedulingPoliciesRequest.Builder to create a request. Contains the parameters for DescribeSchedulingPolicies.
    
    Returns:
    
    Result of the DescribeSchedulingPolicies operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listJobs
```
default ListJobsResponse listJobs(ListJobsRequest listJobsRequest)
                           throws ClientException,
                                  ServerException,
                                  AwsServiceException,
                                  SdkClientException,
                                  BatchException
```
    Returns a list of Batch jobs.
    
    You must specify only one of the following items:
    - A job queue ID to return a list of jobs in that job queue
    - A multi-node parallel job ID to return a list of nodes for that job
    - An array job ID to return a list of the children for that job
    You can filter the results by job status with the jobStatus parameter. If you don't specify a status, only RUNNING jobs are returned.
    Parameters:
    
    listJobsRequest - Contains the parameters for ListJobs.
    
    Returns:
    
    Result of the ListJobs operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listJobs
```
default ListJobsResponse listJobs(Consumer<ListJobsRequest.Builder> listJobsRequest)
                           throws ClientException,
                                  ServerException,
                                  AwsServiceException,
                                  SdkClientException,
                                  BatchException
```
    Returns a list of Batch jobs.
    
    You must specify only one of the following items:
    - A job queue ID to return a list of jobs in that job queue
    - A multi-node parallel job ID to return a list of nodes for that job
    - An array job ID to return a list of the children for that job
    You can filter the results by job status with the jobStatus parameter. If you don't specify a status, only RUNNING jobs are returned.
    
    This is a convenience which creates an instance of the ListJobsRequest.Builder avoiding the need to create one manually via ListJobsRequest.builder()
    Parameters:
    
    listJobsRequest - A Consumer that will call methods on ListJobsRequest.Builder to create a request. Contains the parameters for ListJobs.
    
    Returns:
    
    Result of the ListJobs operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listJobsPaginator
```
default ListJobsIterable listJobsPaginator(ListJobsRequest listJobsRequest)
                                    throws ClientException,
                                           ServerException,
                                           AwsServiceException,
                                           SdkClientException,
                                           BatchException
```
    Returns a list of Batch jobs.
    
    You must specify only one of the following items:
    - A job queue ID to return a list of jobs in that job queue
    - A multi-node parallel job ID to return a list of nodes for that job
    - An array job ID to return a list of the children for that job
    You can filter the results by job status with the jobStatus parameter. If you don't specify a status, only RUNNING jobs are returned.
    
    This is a variant of listJobs(software.amazon.awssdk.services.batch.model.ListJobsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.ListJobsIterable responses = client.listJobsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.ListJobsIterable responses = client.listJobsPaginator(request);
     for (software.amazon.awssdk.services.batch.model.ListJobsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.ListJobsIterable responses = client.listJobsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listJobs(software.amazon.awssdk.services.batch.model.ListJobsRequest) operation.
    Parameters:
    
    listJobsRequest - Contains the parameters for ListJobs.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listJobsPaginator
```
default ListJobsIterable listJobsPaginator(Consumer<ListJobsRequest.Builder> listJobsRequest)
                                    throws ClientException,
                                           ServerException,
                                           AwsServiceException,
                                           SdkClientException,
                                           BatchException
```
    Returns a list of Batch jobs.
    
    You must specify only one of the following items:
    - A job queue ID to return a list of jobs in that job queue
    - A multi-node parallel job ID to return a list of nodes for that job
    - An array job ID to return a list of the children for that job
    You can filter the results by job status with the jobStatus parameter. If you don't specify a status, only RUNNING jobs are returned.
    
    This is a variant of listJobs(software.amazon.awssdk.services.batch.model.ListJobsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.ListJobsIterable responses = client.listJobsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.ListJobsIterable responses = client.listJobsPaginator(request);
     for (software.amazon.awssdk.services.batch.model.ListJobsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.ListJobsIterable responses = client.listJobsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listJobs(software.amazon.awssdk.services.batch.model.ListJobsRequest) operation.
    
    This is a convenience which creates an instance of the ListJobsRequest.Builder avoiding the need to create one manually via ListJobsRequest.builder()
    Parameters:
    
    listJobsRequest - A Consumer that will call methods on ListJobsRequest.Builder to create a request. Contains the parameters for ListJobs.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSchedulingPolicies
```
default ListSchedulingPoliciesResponse listSchedulingPolicies(ListSchedulingPoliciesRequest listSchedulingPoliciesRequest)
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Returns a list of Batch scheduling policies.
    
    Parameters:
    
    listSchedulingPoliciesRequest - Contains the parameters for ListSchedulingPolicies.
    
    Returns:
    
    Result of the ListSchedulingPolicies operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSchedulingPolicies
```
default ListSchedulingPoliciesResponse listSchedulingPolicies(Consumer<ListSchedulingPoliciesRequest.Builder> listSchedulingPoliciesRequest)
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Returns a list of Batch scheduling policies.
    
    This is a convenience which creates an instance of the ListSchedulingPoliciesRequest.Builder avoiding the need to create one manually via ListSchedulingPoliciesRequest.builder()
    
    Parameters:
    
    listSchedulingPoliciesRequest - A Consumer that will call methods on ListSchedulingPoliciesRequest.Builder to create a request. Contains the parameters for ListSchedulingPolicies.
    
    Returns:
    
    Result of the ListSchedulingPolicies operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSchedulingPoliciesPaginator
```
default ListSchedulingPoliciesIterable listSchedulingPoliciesPaginator(ListSchedulingPoliciesRequest listSchedulingPoliciesRequest)
                                                                throws ClientException,
                                                                       ServerException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       BatchException
```
    Returns a list of Batch scheduling policies.
    
    This is a variant of listSchedulingPolicies(software.amazon.awssdk.services.batch.model.ListSchedulingPoliciesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.ListSchedulingPoliciesIterable responses = client.listSchedulingPoliciesPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.ListSchedulingPoliciesIterable responses = client
             .listSchedulingPoliciesPaginator(request);
     for (software.amazon.awssdk.services.batch.model.ListSchedulingPoliciesResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.ListSchedulingPoliciesIterable responses = client.listSchedulingPoliciesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listSchedulingPolicies(software.amazon.awssdk.services.batch.model.ListSchedulingPoliciesRequest) operation.
    Parameters:
    
    listSchedulingPoliciesRequest - Contains the parameters for ListSchedulingPolicies.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSchedulingPoliciesPaginator
```
default ListSchedulingPoliciesIterable listSchedulingPoliciesPaginator(Consumer<ListSchedulingPoliciesRequest.Builder> listSchedulingPoliciesRequest)
                                                                throws ClientException,
                                                                       ServerException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       BatchException
```
    Returns a list of Batch scheduling policies.
    
    This is a variant of listSchedulingPolicies(software.amazon.awssdk.services.batch.model.ListSchedulingPoliciesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.batch.paginators.ListSchedulingPoliciesIterable responses = client.listSchedulingPoliciesPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.batch.paginators.ListSchedulingPoliciesIterable responses = client
             .listSchedulingPoliciesPaginator(request);
     for (software.amazon.awssdk.services.batch.model.ListSchedulingPoliciesResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.batch.paginators.ListSchedulingPoliciesIterable responses = client.listSchedulingPoliciesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listSchedulingPolicies(software.amazon.awssdk.services.batch.model.ListSchedulingPoliciesRequest) operation.
    
    This is a convenience which creates an instance of the ListSchedulingPoliciesRequest.Builder avoiding the need to create one manually via ListSchedulingPoliciesRequest.builder()
    Parameters:
    
    listSchedulingPoliciesRequest - A Consumer that will call methods on ListSchedulingPoliciesRequest.Builder to create a request. Contains the parameters for ListSchedulingPolicies.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
                                                 throws ClientException,
                                                        ServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        BatchException
```
    Lists the tags for an Batch resource. Batch resources that support tags are compute environments, jobs, job definitions, job queues, and scheduling policies. ARNs for child jobs of array and multi-node parallel (MNP) jobs aren't supported.
    
    Parameters:
    
    listTagsForResourceRequest - Contains the parameters for ListTagsForResource.
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                 throws ClientException,
                                                        ServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        BatchException
```
    Lists the tags for an Batch resource. Batch resources that support tags are compute environments, jobs, job definitions, job queues, and scheduling policies. ARNs for child jobs of array and multi-node parallel (MNP) jobs aren't supported.
    
    This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()
    
    Parameters:
    
    listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request. Contains the parameters for ListTagsForResource.
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - registerJobDefinition
```
default RegisterJobDefinitionResponse registerJobDefinition(RegisterJobDefinitionRequest registerJobDefinitionRequest)
                                                     throws ClientException,
                                                            ServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            BatchException
```
    Registers an Batch job definition.
    
    Parameters:
    
    registerJobDefinitionRequest - Contains the parameters for RegisterJobDefinition.
    
    Returns:
    
    Result of the RegisterJobDefinition operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - registerJobDefinition
```
default RegisterJobDefinitionResponse registerJobDefinition(Consumer<RegisterJobDefinitionRequest.Builder> registerJobDefinitionRequest)
                                                     throws ClientException,
                                                            ServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            BatchException
```
    Registers an Batch job definition.
    
    This is a convenience which creates an instance of the RegisterJobDefinitionRequest.Builder avoiding the need to create one manually via RegisterJobDefinitionRequest.builder()
    
    Parameters:
    
    registerJobDefinitionRequest - A Consumer that will call methods on RegisterJobDefinitionRequest.Builder to create a request. Contains the parameters for RegisterJobDefinition.
    
    Returns:
    
    Result of the RegisterJobDefinition operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - submitJob
```
default SubmitJobResponse submitJob(SubmitJobRequest submitJobRequest)
                             throws ClientException,
                                    ServerException,
                                    AwsServiceException,
                                    SdkClientException,
                                    BatchException
```
    Submits an Batch job from a job definition. Parameters that are specified during SubmitJob override parameters defined in the job definition. vCPU and memory requirements that are specified in the resourceRequirements objects in the job definition are the exception. They can't be overridden this way using the memory and vcpus parameters. Rather, you must specify updates to job definition parameters in a resourceRequirements object that's included in the containerOverrides parameter.
    
    Job queues with a scheduling policy are limited to 500 active fair share identifiers at a time.
    
    Jobs that run on Fargate resources can't be guaranteed to run for more than 14 days. This is because, after 14 days, Fargate resources might become unavailable and job might be terminated.
    
    Parameters:
    
    submitJobRequest - Contains the parameters for SubmitJob.
    
    Returns:
    
    Result of the SubmitJob operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - submitJob
```
default SubmitJobResponse submitJob(Consumer<SubmitJobRequest.Builder> submitJobRequest)
                             throws ClientException,
                                    ServerException,
                                    AwsServiceException,
                                    SdkClientException,
                                    BatchException
```
    Submits an Batch job from a job definition. Parameters that are specified during SubmitJob override parameters defined in the job definition. vCPU and memory requirements that are specified in the resourceRequirements objects in the job definition are the exception. They can't be overridden this way using the memory and vcpus parameters. Rather, you must specify updates to job definition parameters in a resourceRequirements object that's included in the containerOverrides parameter.
    
    Job queues with a scheduling policy are limited to 500 active fair share identifiers at a time.
    
    Jobs that run on Fargate resources can't be guaranteed to run for more than 14 days. This is because, after 14 days, Fargate resources might become unavailable and job might be terminated.
    
    This is a convenience which creates an instance of the SubmitJobRequest.Builder avoiding the need to create one manually via SubmitJobRequest.builder()
    
    Parameters:
    
    submitJobRequest - A Consumer that will call methods on SubmitJobRequest.Builder to create a request. Contains the parameters for SubmitJob.
    
    Returns:
    
    Result of the SubmitJob operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws ClientException,
                                        ServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        BatchException
```
    Associates the specified tags to a resource with the specified resourceArn. If existing tags on a resource aren't specified in the request parameters, they aren't changed. When a resource is deleted, the tags that are associated with that resource are deleted as well. Batch resources that support tags are compute environments, jobs, job definitions, job queues, and scheduling policies. ARNs for child jobs of array and multi-node parallel (MNP) jobs aren't supported.
    
    Parameters:
    
    tagResourceRequest - Contains the parameters for TagResource.
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws ClientException,
                                        ServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        BatchException
```
    Associates the specified tags to a resource with the specified resourceArn. If existing tags on a resource aren't specified in the request parameters, they aren't changed. When a resource is deleted, the tags that are associated with that resource are deleted as well. Batch resources that support tags are compute environments, jobs, job definitions, job queues, and scheduling policies. ARNs for child jobs of array and multi-node parallel (MNP) jobs aren't supported.
    
    This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
    
    Parameters:
    
    tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request. Contains the parameters for TagResource.
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - terminateJob
```
default TerminateJobResponse terminateJob(TerminateJobRequest terminateJobRequest)
                                   throws ClientException,
                                          ServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          BatchException
```
    Terminates a job in a job queue. Jobs that are in the STARTING or RUNNING state are terminated, which causes them to transition to FAILED. Jobs that have not progressed to the STARTING state are cancelled.
    
    Parameters:
    
    terminateJobRequest - Contains the parameters for TerminateJob.
    
    Returns:
    
    Result of the TerminateJob operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - terminateJob
```
default TerminateJobResponse terminateJob(Consumer<TerminateJobRequest.Builder> terminateJobRequest)
                                   throws ClientException,
                                          ServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          BatchException
```
    Terminates a job in a job queue. Jobs that are in the STARTING or RUNNING state are terminated, which causes them to transition to FAILED. Jobs that have not progressed to the STARTING state are cancelled.
    
    This is a convenience which creates an instance of the TerminateJobRequest.Builder avoiding the need to create one manually via TerminateJobRequest.builder()
    
    Parameters:
    
    terminateJobRequest - A Consumer that will call methods on TerminateJobRequest.Builder to create a request. Contains the parameters for TerminateJob.
    
    Returns:
    
    Result of the TerminateJob operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws ClientException,
                                            ServerException,
                                            AwsServiceException,
                                            SdkClientException,
                                            BatchException
```
    Deletes specified tags from an Batch resource.
    
    Parameters:
    
    untagResourceRequest - Contains the parameters for UntagResource.
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws ClientException,
                                            ServerException,
                                            AwsServiceException,
                                            SdkClientException,
                                            BatchException
```
    Deletes specified tags from an Batch resource.
    
    This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
    
    Parameters:
    
    untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request. Contains the parameters for UntagResource.
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateComputeEnvironment
```
default UpdateComputeEnvironmentResponse updateComputeEnvironment(UpdateComputeEnvironmentRequest updateComputeEnvironmentRequest)
                                                           throws ClientException,
                                                                  ServerException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  BatchException
```
    Updates an Batch compute environment.
    
    Parameters:
    
    updateComputeEnvironmentRequest - Contains the parameters for UpdateComputeEnvironment.
    
    Returns:
    
    Result of the UpdateComputeEnvironment operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateComputeEnvironment
```
default UpdateComputeEnvironmentResponse updateComputeEnvironment(Consumer<UpdateComputeEnvironmentRequest.Builder> updateComputeEnvironmentRequest)
                                                           throws ClientException,
                                                                  ServerException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  BatchException
```
    Updates an Batch compute environment.
    
    This is a convenience which creates an instance of the UpdateComputeEnvironmentRequest.Builder avoiding the need to create one manually via UpdateComputeEnvironmentRequest.builder()
    
    Parameters:
    
    updateComputeEnvironmentRequest - A Consumer that will call methods on UpdateComputeEnvironmentRequest.Builder to create a request. Contains the parameters for UpdateComputeEnvironment.
    
    Returns:
    
    Result of the UpdateComputeEnvironment operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateJobQueue
```
default UpdateJobQueueResponse updateJobQueue(UpdateJobQueueRequest updateJobQueueRequest)
                                       throws ClientException,
                                              ServerException,
                                              AwsServiceException,
                                              SdkClientException,
                                              BatchException
```
    Updates a job queue.
    
    Parameters:
    
    updateJobQueueRequest - Contains the parameters for UpdateJobQueue.
    
    Returns:
    
    Result of the UpdateJobQueue operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateJobQueue
```
default UpdateJobQueueResponse updateJobQueue(Consumer<UpdateJobQueueRequest.Builder> updateJobQueueRequest)
                                       throws ClientException,
                                              ServerException,
                                              AwsServiceException,
                                              SdkClientException,
                                              BatchException
```
    Updates a job queue.
    
    This is a convenience which creates an instance of the UpdateJobQueueRequest.Builder avoiding the need to create one manually via UpdateJobQueueRequest.builder()
    
    Parameters:
    
    updateJobQueueRequest - A Consumer that will call methods on UpdateJobQueueRequest.Builder to create a request. Contains the parameters for UpdateJobQueue.
    
    Returns:
    
    Result of the UpdateJobQueue operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateSchedulingPolicy
```
default UpdateSchedulingPolicyResponse updateSchedulingPolicy(UpdateSchedulingPolicyRequest updateSchedulingPolicyRequest)
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Updates a scheduling policy.
    
    Parameters:
    
    updateSchedulingPolicyRequest - Contains the parameters for UpdateSchedulingPolicy.
    
    Returns:
    
    Result of the UpdateSchedulingPolicy operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateSchedulingPolicy
```
default UpdateSchedulingPolicyResponse updateSchedulingPolicy(Consumer<UpdateSchedulingPolicyRequest.Builder> updateSchedulingPolicyRequest)
                                                       throws ClientException,
                                                              ServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              BatchException
```
    Updates a scheduling policy.
    
    This is a convenience which creates an instance of the UpdateSchedulingPolicyRequest.Builder avoiding the need to create one manually via UpdateSchedulingPolicyRequest.builder()
    
    Parameters:
    
    updateSchedulingPolicyRequest - A Consumer that will call methods on UpdateSchedulingPolicyRequest.Builder to create a request. Contains the parameters for UpdateSchedulingPolicy.
    
    Returns:
    
    Result of the UpdateSchedulingPolicy operation returned by the service.
    
    Throws:
    
    ClientException - These errors are usually caused by a client action. One example cause is using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Another cause is specifying an identifier that's not valid.
    
    ServerException - These errors are usually caused by a server issue.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    BatchException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - serviceMetadata
```
static ServiceMetadata serviceMetadata()
```

Interface BatchClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Field Detail

SERVICE_NAME

SERVICE_METADATA_ID

Method Detail

create

builder

cancelJob

cancelJob

createComputeEnvironment

createComputeEnvironment

createJobQueue

createJobQueue

createSchedulingPolicy

createSchedulingPolicy

deleteComputeEnvironment

deleteComputeEnvironment

deleteJobQueue

deleteJobQueue

deleteSchedulingPolicy

deleteSchedulingPolicy

deregisterJobDefinition

deregisterJobDefinition

describeComputeEnvironments

describeComputeEnvironments

describeComputeEnvironments

describeComputeEnvironmentsPaginator

describeComputeEnvironmentsPaginator

describeComputeEnvironmentsPaginator

describeJobDefinitions

describeJobDefinitions

describeJobDefinitions

describeJobDefinitionsPaginator

describeJobDefinitionsPaginator

describeJobDefinitionsPaginator

describeJobQueues

describeJobQueues

describeJobQueues

describeJobQueuesPaginator

describeJobQueuesPaginator

describeJobQueuesPaginator

describeJobs

describeJobs

describeSchedulingPolicies

describeSchedulingPolicies

listJobs

listJobs

listJobsPaginator

listJobsPaginator

listSchedulingPolicies

listSchedulingPolicies

listSchedulingPoliciesPaginator

listSchedulingPoliciesPaginator

listTagsForResource

listTagsForResource

registerJobDefinition

registerJobDefinition

submitJob

submitJob

tagResource

tagResource

terminateJob

terminateJob

untagResource

untagResource

updateComputeEnvironment

updateComputeEnvironment

updateJobQueue

updateJobQueue

updateSchedulingPolicy

updateSchedulingPolicy

serviceMetadata