Package software.amazon.awssdk.services.cognitoidentityprovider.model

Interface UpdateUserPoolClientRequest.Builder

    • Method Detail

      • userPoolId

        UpdateUserPoolClientRequest.Builder userPoolId​(String userPoolId)

        The user pool ID for the user pool where you want to update the user pool client.

        Parameters:
        userPoolId - The user pool ID for the user pool where you want to update the user pool client.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • clientId

        UpdateUserPoolClientRequest.Builder clientId​(String clientId)

        The ID of the client associated with the user pool.

        Parameters:
        clientId - The ID of the client associated with the user pool.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • clientName

        UpdateUserPoolClientRequest.Builder clientName​(String clientName)

        The client name from the update user pool client request.

        Parameters:
        clientName - The client name from the update user pool client request.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • refreshTokenValidity

        UpdateUserPoolClientRequest.Builder refreshTokenValidity​(Integer refreshTokenValidity)

        The refresh token time limit. After this limit expires, your user can't use their refresh token. To specify the time unit for RefreshTokenValidity as seconds, minutes, hours, or days, set a TokenValidityUnits value in your API request.

        For example, when you set RefreshTokenValidity as 10 and TokenValidityUnits as days, your user can refresh their session and retrieve new access and ID tokens for 10 days.

        The default time unit for RefreshTokenValidity in an API request is days. You can't set RefreshTokenValidity to 0. If you do, Amazon Cognito overrides the value with the default value of 30 days. Valid range is displayed below in seconds.

        If you don't specify otherwise in the configuration of your app client, your refresh tokens are valid for 30 days.

        Parameters:
        refreshTokenValidity - The refresh token time limit. After this limit expires, your user can't use their refresh token. To specify the time unit for RefreshTokenValidity as seconds, minutes, hours, or days, set a TokenValidityUnits value in your API request.

        For example, when you set RefreshTokenValidity as 10 and TokenValidityUnits as days, your user can refresh their session and retrieve new access and ID tokens for 10 days.

        The default time unit for RefreshTokenValidity in an API request is days. You can't set RefreshTokenValidity to 0. If you do, Amazon Cognito overrides the value with the default value of 30 days. Valid range is displayed below in seconds.

        If you don't specify otherwise in the configuration of your app client, your refresh tokens are valid for 30 days.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • accessTokenValidity

        UpdateUserPoolClientRequest.Builder accessTokenValidity​(Integer accessTokenValidity)

        The access token time limit. After this limit expires, your user can't use their access token. To specify the time unit for AccessTokenValidity as seconds, minutes, hours, or days, set a TokenValidityUnits value in your API request.

        For example, when you set AccessTokenValidity to 10 and TokenValidityUnits to hours, your user can authorize access with their access token for 10 hours.

        The default time unit for AccessTokenValidity in an API request is hours. Valid range is displayed below in seconds.

        If you don't specify otherwise in the configuration of your app client, your access tokens are valid for one hour.

        Parameters:
        accessTokenValidity - The access token time limit. After this limit expires, your user can't use their access token. To specify the time unit for AccessTokenValidity as seconds, minutes, hours, or days, set a TokenValidityUnits value in your API request.

        For example, when you set AccessTokenValidity to 10 and TokenValidityUnits to hours, your user can authorize access with their access token for 10 hours.

        The default time unit for AccessTokenValidity in an API request is hours. Valid range is displayed below in seconds.

        If you don't specify otherwise in the configuration of your app client, your access tokens are valid for one hour.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • idTokenValidity

        UpdateUserPoolClientRequest.Builder idTokenValidity​(Integer idTokenValidity)

        The ID token time limit. After this limit expires, your user can't use their ID token. To specify the time unit for IdTokenValidity as seconds, minutes, hours, or days, set a TokenValidityUnits value in your API request.

        For example, when you set IdTokenValidity as 10 and TokenValidityUnits as hours, your user can authenticate their session with their ID token for 10 hours.

        The default time unit for IdTokenValidity in an API request is hours. Valid range is displayed below in seconds.

        If you don't specify otherwise in the configuration of your app client, your ID tokens are valid for one hour.

        Parameters:
        idTokenValidity - The ID token time limit. After this limit expires, your user can't use their ID token. To specify the time unit for IdTokenValidity as seconds, minutes, hours, or days, set a TokenValidityUnits value in your API request.

        For example, when you set IdTokenValidity as 10 and TokenValidityUnits as hours, your user can authenticate their session with their ID token for 10 hours.

        The default time unit for IdTokenValidity in an API request is hours. Valid range is displayed below in seconds.

        If you don't specify otherwise in the configuration of your app client, your ID tokens are valid for one hour.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • tokenValidityUnits

        UpdateUserPoolClientRequest.Builder tokenValidityUnits​(TokenValidityUnitsType tokenValidityUnits)

        The time units you use when you set the duration of ID, access, and refresh tokens. The default unit for RefreshToken is days, and the default for ID and access tokens is hours.

        Parameters:
        tokenValidityUnits - The time units you use when you set the duration of ID, access, and refresh tokens. The default unit for RefreshToken is days, and the default for ID and access tokens is hours.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • readAttributes

        UpdateUserPoolClientRequest.Builder readAttributes​(Collection<String> readAttributes)

        The list of user attributes that you want your app client to have read access to. After your user authenticates in your app, their access token authorizes them to read their own attribute value for any attribute in this list. An example of this kind of activity is when your user selects a link to view their profile information. Your app makes a GetUser API request to retrieve and display your user's profile data.

        When you don't specify the ReadAttributes for your app client, your app can read the values of email_verified, phone_number_verified, and the Standard attributes of your user pool. When your user pool app client has read access to these default attributes, ReadAttributes doesn't return any information. Amazon Cognito only populates ReadAttributes in the API response if you have specified your own custom set of read attributes.

        Parameters:
        readAttributes - The list of user attributes that you want your app client to have read access to. After your user authenticates in your app, their access token authorizes them to read their own attribute value for any attribute in this list. An example of this kind of activity is when your user selects a link to view their profile information. Your app makes a GetUser API request to retrieve and display your user's profile data.

        When you don't specify the ReadAttributes for your app client, your app can read the values of email_verified, phone_number_verified, and the Standard attributes of your user pool. When your user pool app client has read access to these default attributes, ReadAttributes doesn't return any information. Amazon Cognito only populates ReadAttributes in the API response if you have specified your own custom set of read attributes.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • readAttributes

        UpdateUserPoolClientRequest.Builder readAttributes​(String... readAttributes)

        The list of user attributes that you want your app client to have read access to. After your user authenticates in your app, their access token authorizes them to read their own attribute value for any attribute in this list. An example of this kind of activity is when your user selects a link to view their profile information. Your app makes a GetUser API request to retrieve and display your user's profile data.

        When you don't specify the ReadAttributes for your app client, your app can read the values of email_verified, phone_number_verified, and the Standard attributes of your user pool. When your user pool app client has read access to these default attributes, ReadAttributes doesn't return any information. Amazon Cognito only populates ReadAttributes in the API response if you have specified your own custom set of read attributes.

        Parameters:
        readAttributes - The list of user attributes that you want your app client to have read access to. After your user authenticates in your app, their access token authorizes them to read their own attribute value for any attribute in this list. An example of this kind of activity is when your user selects a link to view their profile information. Your app makes a GetUser API request to retrieve and display your user's profile data.

        When you don't specify the ReadAttributes for your app client, your app can read the values of email_verified, phone_number_verified, and the Standard attributes of your user pool. When your user pool app client has read access to these default attributes, ReadAttributes doesn't return any information. Amazon Cognito only populates ReadAttributes in the API response if you have specified your own custom set of read attributes.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • writeAttributes

        UpdateUserPoolClientRequest.Builder writeAttributes​(Collection<String> writeAttributes)

        The list of user attributes that you want your app client to have write access to. After your user authenticates in your app, their access token authorizes them to set or modify their own attribute value for any attribute in this list. An example of this kind of activity is when you present your user with a form to update their profile information and they change their last name. Your app then makes an UpdateUserAttributes API request and sets family_name to the new value.

        When you don't specify the WriteAttributes for your app client, your app can write the values of the Standard attributes of your user pool. When your user pool has write access to these default attributes, WriteAttributes doesn't return any information. Amazon Cognito only populates WriteAttributes in the API response if you have specified your own custom set of write attributes.

        If your app client allows users to sign in through an IdP, this array must include all attributes that you have mapped to IdP attributes. Amazon Cognito updates mapped attributes when users sign in to your application through an IdP. If your app client does not have write access to a mapped attribute, Amazon Cognito throws an error when it tries to update the attribute. For more information, see Specifying IdP Attribute Mappings for Your user pool.

        Parameters:
        writeAttributes - The list of user attributes that you want your app client to have write access to. After your user authenticates in your app, their access token authorizes them to set or modify their own attribute value for any attribute in this list. An example of this kind of activity is when you present your user with a form to update their profile information and they change their last name. Your app then makes an UpdateUserAttributes API request and sets family_name to the new value.

        When you don't specify the WriteAttributes for your app client, your app can write the values of the Standard attributes of your user pool. When your user pool has write access to these default attributes, WriteAttributes doesn't return any information. Amazon Cognito only populates WriteAttributes in the API response if you have specified your own custom set of write attributes.

        If your app client allows users to sign in through an IdP, this array must include all attributes that you have mapped to IdP attributes. Amazon Cognito updates mapped attributes when users sign in to your application through an IdP. If your app client does not have write access to a mapped attribute, Amazon Cognito throws an error when it tries to update the attribute. For more information, see Specifying IdP Attribute Mappings for Your user pool.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • writeAttributes

        UpdateUserPoolClientRequest.Builder writeAttributes​(String... writeAttributes)

        The list of user attributes that you want your app client to have write access to. After your user authenticates in your app, their access token authorizes them to set or modify their own attribute value for any attribute in this list. An example of this kind of activity is when you present your user with a form to update their profile information and they change their last name. Your app then makes an UpdateUserAttributes API request and sets family_name to the new value.

        When you don't specify the WriteAttributes for your app client, your app can write the values of the Standard attributes of your user pool. When your user pool has write access to these default attributes, WriteAttributes doesn't return any information. Amazon Cognito only populates WriteAttributes in the API response if you have specified your own custom set of write attributes.

        If your app client allows users to sign in through an IdP, this array must include all attributes that you have mapped to IdP attributes. Amazon Cognito updates mapped attributes when users sign in to your application through an IdP. If your app client does not have write access to a mapped attribute, Amazon Cognito throws an error when it tries to update the attribute. For more information, see Specifying IdP Attribute Mappings for Your user pool.

        Parameters:
        writeAttributes - The list of user attributes that you want your app client to have write access to. After your user authenticates in your app, their access token authorizes them to set or modify their own attribute value for any attribute in this list. An example of this kind of activity is when you present your user with a form to update their profile information and they change their last name. Your app then makes an UpdateUserAttributes API request and sets family_name to the new value.

        When you don't specify the WriteAttributes for your app client, your app can write the values of the Standard attributes of your user pool. When your user pool has write access to these default attributes, WriteAttributes doesn't return any information. Amazon Cognito only populates WriteAttributes in the API response if you have specified your own custom set of write attributes.

        If your app client allows users to sign in through an IdP, this array must include all attributes that you have mapped to IdP attributes. Amazon Cognito updates mapped attributes when users sign in to your application through an IdP. If your app client does not have write access to a mapped attribute, Amazon Cognito throws an error when it tries to update the attribute. For more information, see Specifying IdP Attribute Mappings for Your user pool.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • explicitAuthFlowsWithStrings

        UpdateUserPoolClientRequest.Builder explicitAuthFlowsWithStrings​(Collection<String> explicitAuthFlows)

        The authentication flows that you want your user pool client to support. For each app client in your user pool, you can sign in your users with any combination of one or more flows, including with a user name and Secure Remote Password (SRP), a user name and password, or a custom authentication process that you define with Lambda functions.

        If you don't specify a value for ExplicitAuthFlows, your user client supports ALLOW_REFRESH_TOKEN_AUTH, ALLOW_USER_SRP_AUTH, and ALLOW_CUSTOM_AUTH.

        Valid values include:

        • ALLOW_ADMIN_USER_PASSWORD_AUTH: Enable admin based user password authentication flow ADMIN_USER_PASSWORD_AUTH. This setting replaces the ADMIN_NO_SRP_AUTH setting. With this authentication flow, your app passes a user name and password to Amazon Cognito in the request, instead of using the Secure Remote Password (SRP) protocol to securely transmit the password.

        • ALLOW_CUSTOM_AUTH: Enable Lambda trigger based authentication.

        • ALLOW_USER_PASSWORD_AUTH: Enable user password-based authentication. In this flow, Amazon Cognito receives the password in the request instead of using the SRP protocol to verify passwords.

        • ALLOW_USER_SRP_AUTH: Enable SRP-based authentication.

        • ALLOW_REFRESH_TOKEN_AUTH: Enable authflow to refresh tokens.

        In some environments, you will see the values ADMIN_NO_SRP_AUTH, CUSTOM_AUTH_FLOW_ONLY, or USER_PASSWORD_AUTH. You can't assign these legacy ExplicitAuthFlows values to user pool clients at the same time as values that begin with ALLOW_, like ALLOW_USER_SRP_AUTH.

        Parameters:
        explicitAuthFlows - The authentication flows that you want your user pool client to support. For each app client in your user pool, you can sign in your users with any combination of one or more flows, including with a user name and Secure Remote Password (SRP), a user name and password, or a custom authentication process that you define with Lambda functions.

        If you don't specify a value for ExplicitAuthFlows, your user client supports ALLOW_REFRESH_TOKEN_AUTH, ALLOW_USER_SRP_AUTH, and ALLOW_CUSTOM_AUTH.

        Valid values include:

        • ALLOW_ADMIN_USER_PASSWORD_AUTH: Enable admin based user password authentication flow ADMIN_USER_PASSWORD_AUTH. This setting replaces the ADMIN_NO_SRP_AUTH setting. With this authentication flow, your app passes a user name and password to Amazon Cognito in the request, instead of using the Secure Remote Password (SRP) protocol to securely transmit the password.

        • ALLOW_CUSTOM_AUTH: Enable Lambda trigger based authentication.

        • ALLOW_USER_PASSWORD_AUTH: Enable user password-based authentication. In this flow, Amazon Cognito receives the password in the request instead of using the SRP protocol to verify passwords.

        • ALLOW_USER_SRP_AUTH: Enable SRP-based authentication.

        • ALLOW_REFRESH_TOKEN_AUTH: Enable authflow to refresh tokens.

        In some environments, you will see the values ADMIN_NO_SRP_AUTH, CUSTOM_AUTH_FLOW_ONLY, or USER_PASSWORD_AUTH. You can't assign these legacy ExplicitAuthFlows values to user pool clients at the same time as values that begin with ALLOW_, like ALLOW_USER_SRP_AUTH.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • explicitAuthFlowsWithStrings

        UpdateUserPoolClientRequest.Builder explicitAuthFlowsWithStrings​(String... explicitAuthFlows)

        The authentication flows that you want your user pool client to support. For each app client in your user pool, you can sign in your users with any combination of one or more flows, including with a user name and Secure Remote Password (SRP), a user name and password, or a custom authentication process that you define with Lambda functions.

        If you don't specify a value for ExplicitAuthFlows, your user client supports ALLOW_REFRESH_TOKEN_AUTH, ALLOW_USER_SRP_AUTH, and ALLOW_CUSTOM_AUTH.

        Valid values include:

        • ALLOW_ADMIN_USER_PASSWORD_AUTH: Enable admin based user password authentication flow ADMIN_USER_PASSWORD_AUTH. This setting replaces the ADMIN_NO_SRP_AUTH setting. With this authentication flow, your app passes a user name and password to Amazon Cognito in the request, instead of using the Secure Remote Password (SRP) protocol to securely transmit the password.

        • ALLOW_CUSTOM_AUTH: Enable Lambda trigger based authentication.

        • ALLOW_USER_PASSWORD_AUTH: Enable user password-based authentication. In this flow, Amazon Cognito receives the password in the request instead of using the SRP protocol to verify passwords.

        • ALLOW_USER_SRP_AUTH: Enable SRP-based authentication.

        • ALLOW_REFRESH_TOKEN_AUTH: Enable authflow to refresh tokens.

        In some environments, you will see the values ADMIN_NO_SRP_AUTH, CUSTOM_AUTH_FLOW_ONLY, or USER_PASSWORD_AUTH. You can't assign these legacy ExplicitAuthFlows values to user pool clients at the same time as values that begin with ALLOW_, like ALLOW_USER_SRP_AUTH.

        Parameters:
        explicitAuthFlows - The authentication flows that you want your user pool client to support. For each app client in your user pool, you can sign in your users with any combination of one or more flows, including with a user name and Secure Remote Password (SRP), a user name and password, or a custom authentication process that you define with Lambda functions.

        If you don't specify a value for ExplicitAuthFlows, your user client supports ALLOW_REFRESH_TOKEN_AUTH, ALLOW_USER_SRP_AUTH, and ALLOW_CUSTOM_AUTH.

        Valid values include:

        • ALLOW_ADMIN_USER_PASSWORD_AUTH: Enable admin based user password authentication flow ADMIN_USER_PASSWORD_AUTH. This setting replaces the ADMIN_NO_SRP_AUTH setting. With this authentication flow, your app passes a user name and password to Amazon Cognito in the request, instead of using the Secure Remote Password (SRP) protocol to securely transmit the password.

        • ALLOW_CUSTOM_AUTH: Enable Lambda trigger based authentication.

        • ALLOW_USER_PASSWORD_AUTH: Enable user password-based authentication. In this flow, Amazon Cognito receives the password in the request instead of using the SRP protocol to verify passwords.

        • ALLOW_USER_SRP_AUTH: Enable SRP-based authentication.

        • ALLOW_REFRESH_TOKEN_AUTH: Enable authflow to refresh tokens.

        In some environments, you will see the values ADMIN_NO_SRP_AUTH, CUSTOM_AUTH_FLOW_ONLY, or USER_PASSWORD_AUTH. You can't assign these legacy ExplicitAuthFlows values to user pool clients at the same time as values that begin with ALLOW_, like ALLOW_USER_SRP_AUTH.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • explicitAuthFlows

        UpdateUserPoolClientRequest.Builder explicitAuthFlows​(Collection<ExplicitAuthFlowsType> explicitAuthFlows)

        The authentication flows that you want your user pool client to support. For each app client in your user pool, you can sign in your users with any combination of one or more flows, including with a user name and Secure Remote Password (SRP), a user name and password, or a custom authentication process that you define with Lambda functions.

        If you don't specify a value for ExplicitAuthFlows, your user client supports ALLOW_REFRESH_TOKEN_AUTH, ALLOW_USER_SRP_AUTH, and ALLOW_CUSTOM_AUTH.

        Valid values include:

        • ALLOW_ADMIN_USER_PASSWORD_AUTH: Enable admin based user password authentication flow ADMIN_USER_PASSWORD_AUTH. This setting replaces the ADMIN_NO_SRP_AUTH setting. With this authentication flow, your app passes a user name and password to Amazon Cognito in the request, instead of using the Secure Remote Password (SRP) protocol to securely transmit the password.

        • ALLOW_CUSTOM_AUTH: Enable Lambda trigger based authentication.

        • ALLOW_USER_PASSWORD_AUTH: Enable user password-based authentication. In this flow, Amazon Cognito receives the password in the request instead of using the SRP protocol to verify passwords.

        • ALLOW_USER_SRP_AUTH: Enable SRP-based authentication.

        • ALLOW_REFRESH_TOKEN_AUTH: Enable authflow to refresh tokens.

        In some environments, you will see the values ADMIN_NO_SRP_AUTH, CUSTOM_AUTH_FLOW_ONLY, or USER_PASSWORD_AUTH. You can't assign these legacy ExplicitAuthFlows values to user pool clients at the same time as values that begin with ALLOW_, like ALLOW_USER_SRP_AUTH.

        Parameters:
        explicitAuthFlows - The authentication flows that you want your user pool client to support. For each app client in your user pool, you can sign in your users with any combination of one or more flows, including with a user name and Secure Remote Password (SRP), a user name and password, or a custom authentication process that you define with Lambda functions.

        If you don't specify a value for ExplicitAuthFlows, your user client supports ALLOW_REFRESH_TOKEN_AUTH, ALLOW_USER_SRP_AUTH, and ALLOW_CUSTOM_AUTH.

        Valid values include:

        • ALLOW_ADMIN_USER_PASSWORD_AUTH: Enable admin based user password authentication flow ADMIN_USER_PASSWORD_AUTH. This setting replaces the ADMIN_NO_SRP_AUTH setting. With this authentication flow, your app passes a user name and password to Amazon Cognito in the request, instead of using the Secure Remote Password (SRP) protocol to securely transmit the password.

        • ALLOW_CUSTOM_AUTH: Enable Lambda trigger based authentication.

        • ALLOW_USER_PASSWORD_AUTH: Enable user password-based authentication. In this flow, Amazon Cognito receives the password in the request instead of using the SRP protocol to verify passwords.

        • ALLOW_USER_SRP_AUTH: Enable SRP-based authentication.

        • ALLOW_REFRESH_TOKEN_AUTH: Enable authflow to refresh tokens.

        In some environments, you will see the values ADMIN_NO_SRP_AUTH, CUSTOM_AUTH_FLOW_ONLY, or USER_PASSWORD_AUTH. You can't assign these legacy ExplicitAuthFlows values to user pool clients at the same time as values that begin with ALLOW_, like ALLOW_USER_SRP_AUTH.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • explicitAuthFlows

        UpdateUserPoolClientRequest.Builder explicitAuthFlows​(ExplicitAuthFlowsType... explicitAuthFlows)

        The authentication flows that you want your user pool client to support. For each app client in your user pool, you can sign in your users with any combination of one or more flows, including with a user name and Secure Remote Password (SRP), a user name and password, or a custom authentication process that you define with Lambda functions.

        If you don't specify a value for ExplicitAuthFlows, your user client supports ALLOW_REFRESH_TOKEN_AUTH, ALLOW_USER_SRP_AUTH, and ALLOW_CUSTOM_AUTH.

        Valid values include:

        • ALLOW_ADMIN_USER_PASSWORD_AUTH: Enable admin based user password authentication flow ADMIN_USER_PASSWORD_AUTH. This setting replaces the ADMIN_NO_SRP_AUTH setting. With this authentication flow, your app passes a user name and password to Amazon Cognito in the request, instead of using the Secure Remote Password (SRP) protocol to securely transmit the password.

        • ALLOW_CUSTOM_AUTH: Enable Lambda trigger based authentication.

        • ALLOW_USER_PASSWORD_AUTH: Enable user password-based authentication. In this flow, Amazon Cognito receives the password in the request instead of using the SRP protocol to verify passwords.

        • ALLOW_USER_SRP_AUTH: Enable SRP-based authentication.

        • ALLOW_REFRESH_TOKEN_AUTH: Enable authflow to refresh tokens.

        In some environments, you will see the values ADMIN_NO_SRP_AUTH, CUSTOM_AUTH_FLOW_ONLY, or USER_PASSWORD_AUTH. You can't assign these legacy ExplicitAuthFlows values to user pool clients at the same time as values that begin with ALLOW_, like ALLOW_USER_SRP_AUTH.

        Parameters:
        explicitAuthFlows - The authentication flows that you want your user pool client to support. For each app client in your user pool, you can sign in your users with any combination of one or more flows, including with a user name and Secure Remote Password (SRP), a user name and password, or a custom authentication process that you define with Lambda functions.

        If you don't specify a value for ExplicitAuthFlows, your user client supports ALLOW_REFRESH_TOKEN_AUTH, ALLOW_USER_SRP_AUTH, and ALLOW_CUSTOM_AUTH.

        Valid values include:

        • ALLOW_ADMIN_USER_PASSWORD_AUTH: Enable admin based user password authentication flow ADMIN_USER_PASSWORD_AUTH. This setting replaces the ADMIN_NO_SRP_AUTH setting. With this authentication flow, your app passes a user name and password to Amazon Cognito in the request, instead of using the Secure Remote Password (SRP) protocol to securely transmit the password.

        • ALLOW_CUSTOM_AUTH: Enable Lambda trigger based authentication.

        • ALLOW_USER_PASSWORD_AUTH: Enable user password-based authentication. In this flow, Amazon Cognito receives the password in the request instead of using the SRP protocol to verify passwords.

        • ALLOW_USER_SRP_AUTH: Enable SRP-based authentication.

        • ALLOW_REFRESH_TOKEN_AUTH: Enable authflow to refresh tokens.

        In some environments, you will see the values ADMIN_NO_SRP_AUTH, CUSTOM_AUTH_FLOW_ONLY, or USER_PASSWORD_AUTH. You can't assign these legacy ExplicitAuthFlows values to user pool clients at the same time as values that begin with ALLOW_, like ALLOW_USER_SRP_AUTH.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • supportedIdentityProviders

        UpdateUserPoolClientRequest.Builder supportedIdentityProviders​(Collection<String> supportedIdentityProviders)

        A list of provider names for the IdPs that this client supports. The following are supported: COGNITO, Facebook, Google, SignInWithApple, LoginWithAmazon, and the names of your own SAML and OIDC providers.

        Parameters:
        supportedIdentityProviders - A list of provider names for the IdPs that this client supports. The following are supported: COGNITO, Facebook, Google, SignInWithApple, LoginWithAmazon, and the names of your own SAML and OIDC providers.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • supportedIdentityProviders

        UpdateUserPoolClientRequest.Builder supportedIdentityProviders​(String... supportedIdentityProviders)

        A list of provider names for the IdPs that this client supports. The following are supported: COGNITO, Facebook, Google, SignInWithApple, LoginWithAmazon, and the names of your own SAML and OIDC providers.

        Parameters:
        supportedIdentityProviders - A list of provider names for the IdPs that this client supports. The following are supported: COGNITO, Facebook, Google, SignInWithApple, LoginWithAmazon, and the names of your own SAML and OIDC providers.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • callbackURLs

        UpdateUserPoolClientRequest.Builder callbackURLs​(Collection<String> callbackURLs)

        A list of allowed redirect (callback) URLs for the IdPs.

        A redirect URI must:

        • Be an absolute URI.

        • Be registered with the authorization server.

        • Not include a fragment component.

        See OAuth 2.0 - Redirection Endpoint.

        Amazon Cognito requires HTTPS over HTTP except for http://localhost for testing purposes only.

        App callback URLs such as myapp://example are also supported.

        Parameters:
        callbackURLs - A list of allowed redirect (callback) URLs for the IdPs.

        A redirect URI must:

        • Be an absolute URI.

        • Be registered with the authorization server.

        • Not include a fragment component.

        See OAuth 2.0 - Redirection Endpoint.

        Amazon Cognito requires HTTPS over HTTP except for http://localhost for testing purposes only.

        App callback URLs such as myapp://example are also supported.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • callbackURLs

        UpdateUserPoolClientRequest.Builder callbackURLs​(String... callbackURLs)

        A list of allowed redirect (callback) URLs for the IdPs.

        A redirect URI must:

        • Be an absolute URI.

        • Be registered with the authorization server.

        • Not include a fragment component.

        See OAuth 2.0 - Redirection Endpoint.

        Amazon Cognito requires HTTPS over HTTP except for http://localhost for testing purposes only.

        App callback URLs such as myapp://example are also supported.

        Parameters:
        callbackURLs - A list of allowed redirect (callback) URLs for the IdPs.

        A redirect URI must:

        • Be an absolute URI.

        • Be registered with the authorization server.

        • Not include a fragment component.

        See OAuth 2.0 - Redirection Endpoint.

        Amazon Cognito requires HTTPS over HTTP except for http://localhost for testing purposes only.

        App callback URLs such as myapp://example are also supported.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • logoutURLs

        UpdateUserPoolClientRequest.Builder logoutURLs​(Collection<String> logoutURLs)

        A list of allowed logout URLs for the IdPs.

        Parameters:
        logoutURLs - A list of allowed logout URLs for the IdPs.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • logoutURLs

        UpdateUserPoolClientRequest.Builder logoutURLs​(String... logoutURLs)

        A list of allowed logout URLs for the IdPs.

        Parameters:
        logoutURLs - A list of allowed logout URLs for the IdPs.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • defaultRedirectURI

        UpdateUserPoolClientRequest.Builder defaultRedirectURI​(String defaultRedirectURI)

        The default redirect URI. Must be in the CallbackURLs list.

        A redirect URI must:

        • Be an absolute URI.

        • Be registered with the authorization server.

        • Not include a fragment component.

        See OAuth 2.0 - Redirection Endpoint.

        Amazon Cognito requires HTTPS over HTTP except for http://localhost for testing purposes only.

        App callback URLs such as myapp://example are also supported.

        Parameters:
        defaultRedirectURI - The default redirect URI. Must be in the CallbackURLs list.

        A redirect URI must:

        • Be an absolute URI.

        • Be registered with the authorization server.

        • Not include a fragment component.

        See OAuth 2.0 - Redirection Endpoint.

        Amazon Cognito requires HTTPS over HTTP except for http://localhost for testing purposes only.

        App callback URLs such as myapp://example are also supported.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • allowedOAuthFlowsWithStrings

        UpdateUserPoolClientRequest.Builder allowedOAuthFlowsWithStrings​(Collection<String> allowedOAuthFlows)

        The allowed OAuth flows.

        code

        Use a code grant flow, which provides an authorization code as the response. This code can be exchanged for access tokens with the /oauth2/token endpoint.

        implicit

        Issue the access token (and, optionally, ID token, based on scopes) directly to your user.

        client_credentials

        Issue the access token from the /oauth2/token endpoint directly to a non-person user using a combination of the client ID and client secret.

        Parameters:
        allowedOAuthFlows - The allowed OAuth flows.

        code

        Use a code grant flow, which provides an authorization code as the response. This code can be exchanged for access tokens with the /oauth2/token endpoint.

        implicit

        Issue the access token (and, optionally, ID token, based on scopes) directly to your user.

        client_credentials

        Issue the access token from the /oauth2/token endpoint directly to a non-person user using a combination of the client ID and client secret.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • allowedOAuthFlowsWithStrings

        UpdateUserPoolClientRequest.Builder allowedOAuthFlowsWithStrings​(String... allowedOAuthFlows)

        The allowed OAuth flows.

        code

        Use a code grant flow, which provides an authorization code as the response. This code can be exchanged for access tokens with the /oauth2/token endpoint.

        implicit

        Issue the access token (and, optionally, ID token, based on scopes) directly to your user.

        client_credentials

        Issue the access token from the /oauth2/token endpoint directly to a non-person user using a combination of the client ID and client secret.

        Parameters:
        allowedOAuthFlows - The allowed OAuth flows.

        code

        Use a code grant flow, which provides an authorization code as the response. This code can be exchanged for access tokens with the /oauth2/token endpoint.

        implicit

        Issue the access token (and, optionally, ID token, based on scopes) directly to your user.

        client_credentials

        Issue the access token from the /oauth2/token endpoint directly to a non-person user using a combination of the client ID and client secret.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • allowedOAuthFlows

        UpdateUserPoolClientRequest.Builder allowedOAuthFlows​(Collection<OAuthFlowType> allowedOAuthFlows)

        The allowed OAuth flows.

        code

        Use a code grant flow, which provides an authorization code as the response. This code can be exchanged for access tokens with the /oauth2/token endpoint.

        implicit

        Issue the access token (and, optionally, ID token, based on scopes) directly to your user.

        client_credentials

        Issue the access token from the /oauth2/token endpoint directly to a non-person user using a combination of the client ID and client secret.

        Parameters:
        allowedOAuthFlows - The allowed OAuth flows.

        code

        Use a code grant flow, which provides an authorization code as the response. This code can be exchanged for access tokens with the /oauth2/token endpoint.

        implicit

        Issue the access token (and, optionally, ID token, based on scopes) directly to your user.

        client_credentials

        Issue the access token from the /oauth2/token endpoint directly to a non-person user using a combination of the client ID and client secret.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • allowedOAuthFlows

        UpdateUserPoolClientRequest.Builder allowedOAuthFlows​(OAuthFlowType... allowedOAuthFlows)

        The allowed OAuth flows.

        code

        Use a code grant flow, which provides an authorization code as the response. This code can be exchanged for access tokens with the /oauth2/token endpoint.

        implicit

        Issue the access token (and, optionally, ID token, based on scopes) directly to your user.

        client_credentials

        Issue the access token from the /oauth2/token endpoint directly to a non-person user using a combination of the client ID and client secret.

        Parameters:
        allowedOAuthFlows - The allowed OAuth flows.

        code

        Use a code grant flow, which provides an authorization code as the response. This code can be exchanged for access tokens with the /oauth2/token endpoint.

        implicit

        Issue the access token (and, optionally, ID token, based on scopes) directly to your user.

        client_credentials

        Issue the access token from the /oauth2/token endpoint directly to a non-person user using a combination of the client ID and client secret.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • allowedOAuthScopes

        UpdateUserPoolClientRequest.Builder allowedOAuthScopes​(Collection<String> allowedOAuthScopes)

        The allowed OAuth scopes. Possible values provided by OAuth are phone, email, openid, and profile. Possible values provided by Amazon Web Services are aws.cognito.signin.user.admin. Custom scopes created in Resource Servers are also supported.

        Parameters:
        allowedOAuthScopes - The allowed OAuth scopes. Possible values provided by OAuth are phone, email , openid, and profile. Possible values provided by Amazon Web Services are aws.cognito.signin.user.admin. Custom scopes created in Resource Servers are also supported.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • allowedOAuthScopes

        UpdateUserPoolClientRequest.Builder allowedOAuthScopes​(String... allowedOAuthScopes)

        The allowed OAuth scopes. Possible values provided by OAuth are phone, email, openid, and profile. Possible values provided by Amazon Web Services are aws.cognito.signin.user.admin. Custom scopes created in Resource Servers are also supported.

        Parameters:
        allowedOAuthScopes - The allowed OAuth scopes. Possible values provided by OAuth are phone, email , openid, and profile. Possible values provided by Amazon Web Services are aws.cognito.signin.user.admin. Custom scopes created in Resource Servers are also supported.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • allowedOAuthFlowsUserPoolClient

        UpdateUserPoolClientRequest.Builder allowedOAuthFlowsUserPoolClient​(Boolean allowedOAuthFlowsUserPoolClient)

        Set to true to use OAuth 2.0 features in your user pool app client.

        AllowedOAuthFlowsUserPoolClient must be true before you can configure the following features in your app client.

        • CallBackURLs: Callback URLs.

        • LogoutURLs: Sign-out redirect URLs.

        • AllowedOAuthScopes: OAuth 2.0 scopes.

        • AllowedOAuthFlows: Support for authorization code, implicit, and client credentials OAuth 2.0 grants.

        To use OAuth 2.0 features, configure one of these features in the Amazon Cognito console or set AllowedOAuthFlowsUserPoolClient to true in a CreateUserPoolClient or UpdateUserPoolClient API request. If you don't set a value for AllowedOAuthFlowsUserPoolClient in a request with the CLI or SDKs, it defaults to false.

        Parameters:
        allowedOAuthFlowsUserPoolClient - Set to true to use OAuth 2.0 features in your user pool app client.

        AllowedOAuthFlowsUserPoolClient must be true before you can configure the following features in your app client.

        • CallBackURLs: Callback URLs.

        • LogoutURLs: Sign-out redirect URLs.

        • AllowedOAuthScopes: OAuth 2.0 scopes.

        • AllowedOAuthFlows: Support for authorization code, implicit, and client credentials OAuth 2.0 grants.

        To use OAuth 2.0 features, configure one of these features in the Amazon Cognito console or set AllowedOAuthFlowsUserPoolClient to true in a CreateUserPoolClient or UpdateUserPoolClient API request. If you don't set a value for AllowedOAuthFlowsUserPoolClient in a request with the CLI or SDKs, it defaults to false.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • analyticsConfiguration

        UpdateUserPoolClientRequest.Builder analyticsConfiguration​(AnalyticsConfigurationType analyticsConfiguration)

        The Amazon Pinpoint analytics configuration necessary to collect metrics for this user pool.

        In Amazon Web Services Regions where Amazon Pinpoint isn't available, user pools only support sending events to Amazon Pinpoint projects in us-east-1. In Regions where Amazon Pinpoint is available, user pools support sending events to Amazon Pinpoint projects within that same Region.

        Parameters:
        analyticsConfiguration - The Amazon Pinpoint analytics configuration necessary to collect metrics for this user pool.

        In Amazon Web Services Regions where Amazon Pinpoint isn't available, user pools only support sending events to Amazon Pinpoint projects in us-east-1. In Regions where Amazon Pinpoint is available, user pools support sending events to Amazon Pinpoint projects within that same Region.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • preventUserExistenceErrors

        UpdateUserPoolClientRequest.Builder preventUserExistenceErrors​(String preventUserExistenceErrors)

        Errors and responses that you want Amazon Cognito APIs to return during authentication, account confirmation, and password recovery when the user doesn't exist in the user pool. When set to ENABLED and the user doesn't exist, authentication returns an error indicating either the username or password was incorrect. Account confirmation and password recovery return a response indicating a code was sent to a simulated destination. When set to LEGACY, those APIs return a UserNotFoundException exception if the user doesn't exist in the user pool.

        Valid values include:

        • ENABLED - This prevents user existence-related errors.

        • LEGACY - This represents the early behavior of Amazon Cognito where user existence related errors aren't prevented.

        Defaults to LEGACY when you don't provide a value.

        Parameters:
        preventUserExistenceErrors - Errors and responses that you want Amazon Cognito APIs to return during authentication, account confirmation, and password recovery when the user doesn't exist in the user pool. When set to ENABLED and the user doesn't exist, authentication returns an error indicating either the username or password was incorrect. Account confirmation and password recovery return a response indicating a code was sent to a simulated destination. When set to LEGACY, those APIs return a UserNotFoundException exception if the user doesn't exist in the user pool.

        Valid values include:

        • ENABLED - This prevents user existence-related errors.

        • LEGACY - This represents the early behavior of Amazon Cognito where user existence related errors aren't prevented.

        Defaults to LEGACY when you don't provide a value.

        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        PreventUserExistenceErrorTypes, PreventUserExistenceErrorTypes

      • preventUserExistenceErrors

        UpdateUserPoolClientRequest.Builder preventUserExistenceErrors​(PreventUserExistenceErrorTypes preventUserExistenceErrors)

        Errors and responses that you want Amazon Cognito APIs to return during authentication, account confirmation, and password recovery when the user doesn't exist in the user pool. When set to ENABLED and the user doesn't exist, authentication returns an error indicating either the username or password was incorrect. Account confirmation and password recovery return a response indicating a code was sent to a simulated destination. When set to LEGACY, those APIs return a UserNotFoundException exception if the user doesn't exist in the user pool.

        Valid values include:

        • ENABLED - This prevents user existence-related errors.

        • LEGACY - This represents the early behavior of Amazon Cognito where user existence related errors aren't prevented.

        Defaults to LEGACY when you don't provide a value.

        Parameters:
        preventUserExistenceErrors - Errors and responses that you want Amazon Cognito APIs to return during authentication, account confirmation, and password recovery when the user doesn't exist in the user pool. When set to ENABLED and the user doesn't exist, authentication returns an error indicating either the username or password was incorrect. Account confirmation and password recovery return a response indicating a code was sent to a simulated destination. When set to LEGACY, those APIs return a UserNotFoundException exception if the user doesn't exist in the user pool.

        Valid values include:

        • ENABLED - This prevents user existence-related errors.

        • LEGACY - This represents the early behavior of Amazon Cognito where user existence related errors aren't prevented.

        Defaults to LEGACY when you don't provide a value.

        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        PreventUserExistenceErrorTypes, PreventUserExistenceErrorTypes

      • enableTokenRevocation

        UpdateUserPoolClientRequest.Builder enableTokenRevocation​(Boolean enableTokenRevocation)

        Activates or deactivates token revocation. For more information about revoking tokens, see RevokeToken.

        Parameters:
        enableTokenRevocation - Activates or deactivates token revocation. For more information about revoking tokens, see RevokeToken.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • enablePropagateAdditionalUserContextData

        UpdateUserPoolClientRequest.Builder enablePropagateAdditionalUserContextData​(Boolean enablePropagateAdditionalUserContextData)

        Activates the propagation of additional user context data. For more information about propagation of user context data, see Adding advanced security to a user pool. If you don’t include this parameter, you can't send device fingerprint information, including source IP address, to Amazon Cognito advanced security. You can only activate EnablePropagateAdditionalUserContextData in an app client that has a client secret.

        Parameters:
        enablePropagateAdditionalUserContextData - Activates the propagation of additional user context data. For more information about propagation of user context data, see Adding advanced security to a user pool. If you don’t include this parameter, you can't send device fingerprint information, including source IP address, to Amazon Cognito advanced security. You can only activate EnablePropagateAdditionalUserContextData in an app client that has a client secret.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • authSessionValidity

        UpdateUserPoolClientRequest.Builder authSessionValidity​(Integer authSessionValidity)

        Amazon Cognito creates a session token for each API request in an authentication flow. AuthSessionValidity is the duration, in minutes, of that session token. Your user pool native user must respond to each authentication challenge before the session expires.

        Parameters:
        authSessionValidity - Amazon Cognito creates a session token for each API request in an authentication flow. AuthSessionValidity is the duration, in minutes, of that session token. Your user pool native user must respond to each authentication challenge before the session expires.
        Returns:
        Returns a reference to this object so that method calls can be chained together.