@Generated(value="software.amazon.awssdk:codegen") @ThreadSafe public interface EcsAsyncClient extends SdkClient
builder()
method.
Amazon Elastic Container Service (Amazon ECS) is a highly scalable, fast, container management service that makes it easy to run, stop, and manage Docker containers on a cluster. You can host your cluster on a serverless infrastructure that is managed by Amazon ECS by launching your services or tasks on AWS Fargate. For more control, you can host your tasks on a cluster of Amazon Elastic Compute Cloud (Amazon EC2) instances that you manage.
Amazon ECS makes it easy to launch and stop container-based applications with simple API calls, allows you to get the state of your cluster from a centralized service, and gives you access to many familiar Amazon EC2 features.
You can use Amazon ECS to schedule the placement of containers across your cluster based on your resource needs, isolation policies, and availability requirements. Amazon ECS eliminates the need for you to operate your own cluster management and configuration management systems or worry about scaling your management infrastructure.
| Modifier and Type | Field and Description |
|---|---|
static String |
SERVICE_METADATA_ID
Value for looking up the service's metadata from the
ServiceMetadataProvider. |
static String |
SERVICE_NAME |
| Modifier and Type | Method and Description |
|---|---|
static EcsAsyncClientBuilder |
builder()
Create a builder that can be used to configure and create a
EcsAsyncClient. |
static EcsAsyncClient |
create()
Create a
EcsAsyncClient with the region loaded from the
DefaultAwsRegionProviderChain and credentials loaded from the
DefaultCredentialsProvider. |
default CompletableFuture<CreateCapacityProviderResponse> |
createCapacityProvider(Consumer<CreateCapacityProviderRequest.Builder> createCapacityProviderRequest)
Creates a new capacity provider.
|
default CompletableFuture<CreateCapacityProviderResponse> |
createCapacityProvider(CreateCapacityProviderRequest createCapacityProviderRequest)
Creates a new capacity provider.
|
default CompletableFuture<CreateClusterResponse> |
createCluster()
Creates a new Amazon ECS cluster.
|
default CompletableFuture<CreateClusterResponse> |
createCluster(Consumer<CreateClusterRequest.Builder> createClusterRequest)
Creates a new Amazon ECS cluster.
|
default CompletableFuture<CreateClusterResponse> |
createCluster(CreateClusterRequest createClusterRequest)
Creates a new Amazon ECS cluster.
|
default CompletableFuture<CreateServiceResponse> |
createService(Consumer<CreateServiceRequest.Builder> createServiceRequest)
Runs and maintains a desired number of tasks from a specified task definition.
|
default CompletableFuture<CreateServiceResponse> |
createService(CreateServiceRequest createServiceRequest)
Runs and maintains a desired number of tasks from a specified task definition.
|
default CompletableFuture<CreateTaskSetResponse> |
createTaskSet(Consumer<CreateTaskSetRequest.Builder> createTaskSetRequest)
Create a task set in the specified cluster and service.
|
default CompletableFuture<CreateTaskSetResponse> |
createTaskSet(CreateTaskSetRequest createTaskSetRequest)
Create a task set in the specified cluster and service.
|
default CompletableFuture<DeleteAccountSettingResponse> |
deleteAccountSetting(Consumer<DeleteAccountSettingRequest.Builder> deleteAccountSettingRequest)
Disables an account setting for a specified IAM user, IAM role, or the root user for an account.
|
default CompletableFuture<DeleteAccountSettingResponse> |
deleteAccountSetting(DeleteAccountSettingRequest deleteAccountSettingRequest)
Disables an account setting for a specified IAM user, IAM role, or the root user for an account.
|
default CompletableFuture<DeleteAttributesResponse> |
deleteAttributes(Consumer<DeleteAttributesRequest.Builder> deleteAttributesRequest)
Deletes one or more custom attributes from an Amazon ECS resource.
|
default CompletableFuture<DeleteAttributesResponse> |
deleteAttributes(DeleteAttributesRequest deleteAttributesRequest)
Deletes one or more custom attributes from an Amazon ECS resource.
|
default CompletableFuture<DeleteCapacityProviderResponse> |
deleteCapacityProvider(Consumer<DeleteCapacityProviderRequest.Builder> deleteCapacityProviderRequest)
Deletes the specified capacity provider.
|
default CompletableFuture<DeleteCapacityProviderResponse> |
deleteCapacityProvider(DeleteCapacityProviderRequest deleteCapacityProviderRequest)
Deletes the specified capacity provider.
|
default CompletableFuture<DeleteClusterResponse> |
deleteCluster(Consumer<DeleteClusterRequest.Builder> deleteClusterRequest)
Deletes the specified cluster.
|
default CompletableFuture<DeleteClusterResponse> |
deleteCluster(DeleteClusterRequest deleteClusterRequest)
Deletes the specified cluster.
|
default CompletableFuture<DeleteServiceResponse> |
deleteService(Consumer<DeleteServiceRequest.Builder> deleteServiceRequest)
Deletes a specified service within a cluster.
|
default CompletableFuture<DeleteServiceResponse> |
deleteService(DeleteServiceRequest deleteServiceRequest)
Deletes a specified service within a cluster.
|
default CompletableFuture<DeleteTaskSetResponse> |
deleteTaskSet(Consumer<DeleteTaskSetRequest.Builder> deleteTaskSetRequest)
Deletes a specified task set within a service.
|
default CompletableFuture<DeleteTaskSetResponse> |
deleteTaskSet(DeleteTaskSetRequest deleteTaskSetRequest)
Deletes a specified task set within a service.
|
default CompletableFuture<DeregisterContainerInstanceResponse> |
deregisterContainerInstance(Consumer<DeregisterContainerInstanceRequest.Builder> deregisterContainerInstanceRequest)
Deregisters an Amazon ECS container instance from the specified cluster.
|
default CompletableFuture<DeregisterContainerInstanceResponse> |
deregisterContainerInstance(DeregisterContainerInstanceRequest deregisterContainerInstanceRequest)
Deregisters an Amazon ECS container instance from the specified cluster.
|
default CompletableFuture<DeregisterTaskDefinitionResponse> |
deregisterTaskDefinition(Consumer<DeregisterTaskDefinitionRequest.Builder> deregisterTaskDefinitionRequest)
Deregisters the specified task definition by family and revision.
|
default CompletableFuture<DeregisterTaskDefinitionResponse> |
deregisterTaskDefinition(DeregisterTaskDefinitionRequest deregisterTaskDefinitionRequest)
Deregisters the specified task definition by family and revision.
|
default CompletableFuture<DescribeCapacityProvidersResponse> |
describeCapacityProviders(Consumer<DescribeCapacityProvidersRequest.Builder> describeCapacityProvidersRequest)
Describes one or more of your capacity providers.
|
default CompletableFuture<DescribeCapacityProvidersResponse> |
describeCapacityProviders(DescribeCapacityProvidersRequest describeCapacityProvidersRequest)
Describes one or more of your capacity providers.
|
default CompletableFuture<DescribeClustersResponse> |
describeClusters()
Describes one or more of your clusters.
|
default CompletableFuture<DescribeClustersResponse> |
describeClusters(Consumer<DescribeClustersRequest.Builder> describeClustersRequest)
Describes one or more of your clusters.
|
default CompletableFuture<DescribeClustersResponse> |
describeClusters(DescribeClustersRequest describeClustersRequest)
Describes one or more of your clusters.
|
default CompletableFuture<DescribeContainerInstancesResponse> |
describeContainerInstances(Consumer<DescribeContainerInstancesRequest.Builder> describeContainerInstancesRequest)
Describes Amazon Elastic Container Service container instances.
|
default CompletableFuture<DescribeContainerInstancesResponse> |
describeContainerInstances(DescribeContainerInstancesRequest describeContainerInstancesRequest)
Describes Amazon Elastic Container Service container instances.
|
default CompletableFuture<DescribeServicesResponse> |
describeServices(Consumer<DescribeServicesRequest.Builder> describeServicesRequest)
Describes the specified services running in your cluster.
|
default CompletableFuture<DescribeServicesResponse> |
describeServices(DescribeServicesRequest describeServicesRequest)
Describes the specified services running in your cluster.
|
default CompletableFuture<DescribeTaskDefinitionResponse> |
describeTaskDefinition(Consumer<DescribeTaskDefinitionRequest.Builder> describeTaskDefinitionRequest)
Describes a task definition.
|
default CompletableFuture<DescribeTaskDefinitionResponse> |
describeTaskDefinition(DescribeTaskDefinitionRequest describeTaskDefinitionRequest)
Describes a task definition.
|
default CompletableFuture<DescribeTasksResponse> |
describeTasks(Consumer<DescribeTasksRequest.Builder> describeTasksRequest)
Describes a specified task or tasks.
|
default CompletableFuture<DescribeTasksResponse> |
describeTasks(DescribeTasksRequest describeTasksRequest)
Describes a specified task or tasks.
|
default CompletableFuture<DescribeTaskSetsResponse> |
describeTaskSets(Consumer<DescribeTaskSetsRequest.Builder> describeTaskSetsRequest)
Describes the task sets in the specified cluster and service.
|
default CompletableFuture<DescribeTaskSetsResponse> |
describeTaskSets(DescribeTaskSetsRequest describeTaskSetsRequest)
Describes the task sets in the specified cluster and service.
|
default CompletableFuture<DiscoverPollEndpointResponse> |
discoverPollEndpoint(Consumer<DiscoverPollEndpointRequest.Builder> discoverPollEndpointRequest)
|
default CompletableFuture<DiscoverPollEndpointResponse> |
discoverPollEndpoint(DiscoverPollEndpointRequest discoverPollEndpointRequest)
|
default CompletableFuture<ExecuteCommandResponse> |
executeCommand(Consumer<ExecuteCommandRequest.Builder> executeCommandRequest)
Runs a command remotely on a container within a task.
|
default CompletableFuture<ExecuteCommandResponse> |
executeCommand(ExecuteCommandRequest executeCommandRequest)
Runs a command remotely on a container within a task.
|
default CompletableFuture<ListAccountSettingsResponse> |
listAccountSettings()
Lists the account settings for a specified principal.
|
default CompletableFuture<ListAccountSettingsResponse> |
listAccountSettings(Consumer<ListAccountSettingsRequest.Builder> listAccountSettingsRequest)
Lists the account settings for a specified principal.
|
default CompletableFuture<ListAccountSettingsResponse> |
listAccountSettings(ListAccountSettingsRequest listAccountSettingsRequest)
Lists the account settings for a specified principal.
|
default ListAccountSettingsPublisher |
listAccountSettingsPaginator()
Lists the account settings for a specified principal.
|
default ListAccountSettingsPublisher |
listAccountSettingsPaginator(Consumer<ListAccountSettingsRequest.Builder> listAccountSettingsRequest)
Lists the account settings for a specified principal.
|
default ListAccountSettingsPublisher |
listAccountSettingsPaginator(ListAccountSettingsRequest listAccountSettingsRequest)
Lists the account settings for a specified principal.
|
default CompletableFuture<ListAttributesResponse> |
listAttributes(Consumer<ListAttributesRequest.Builder> listAttributesRequest)
Lists the attributes for Amazon ECS resources within a specified target type and cluster.
|
default CompletableFuture<ListAttributesResponse> |
listAttributes(ListAttributesRequest listAttributesRequest)
Lists the attributes for Amazon ECS resources within a specified target type and cluster.
|
default ListAttributesPublisher |
listAttributesPaginator(Consumer<ListAttributesRequest.Builder> listAttributesRequest)
Lists the attributes for Amazon ECS resources within a specified target type and cluster.
|
default ListAttributesPublisher |
listAttributesPaginator(ListAttributesRequest listAttributesRequest)
Lists the attributes for Amazon ECS resources within a specified target type and cluster.
|
default CompletableFuture<ListClustersResponse> |
listClusters()
Returns a list of existing clusters.
|
default CompletableFuture<ListClustersResponse> |
listClusters(Consumer<ListClustersRequest.Builder> listClustersRequest)
Returns a list of existing clusters.
|
default CompletableFuture<ListClustersResponse> |
listClusters(ListClustersRequest listClustersRequest)
Returns a list of existing clusters.
|
default ListClustersPublisher |
listClustersPaginator()
Returns a list of existing clusters.
|
default ListClustersPublisher |
listClustersPaginator(Consumer<ListClustersRequest.Builder> listClustersRequest)
Returns a list of existing clusters.
|
default ListClustersPublisher |
listClustersPaginator(ListClustersRequest listClustersRequest)
Returns a list of existing clusters.
|
default CompletableFuture<ListContainerInstancesResponse> |
listContainerInstances()
Returns a list of container instances in a specified cluster.
|
default CompletableFuture<ListContainerInstancesResponse> |
listContainerInstances(Consumer<ListContainerInstancesRequest.Builder> listContainerInstancesRequest)
Returns a list of container instances in a specified cluster.
|
default CompletableFuture<ListContainerInstancesResponse> |
listContainerInstances(ListContainerInstancesRequest listContainerInstancesRequest)
Returns a list of container instances in a specified cluster.
|
default ListContainerInstancesPublisher |
listContainerInstancesPaginator()
Returns a list of container instances in a specified cluster.
|
default ListContainerInstancesPublisher |
listContainerInstancesPaginator(Consumer<ListContainerInstancesRequest.Builder> listContainerInstancesRequest)
Returns a list of container instances in a specified cluster.
|
default ListContainerInstancesPublisher |
listContainerInstancesPaginator(ListContainerInstancesRequest listContainerInstancesRequest)
Returns a list of container instances in a specified cluster.
|
default CompletableFuture<ListServicesResponse> |
listServices()
Lists the services that are running in a specified cluster.
|
default CompletableFuture<ListServicesResponse> |
listServices(Consumer<ListServicesRequest.Builder> listServicesRequest)
Lists the services that are running in a specified cluster.
|
default CompletableFuture<ListServicesResponse> |
listServices(ListServicesRequest listServicesRequest)
Lists the services that are running in a specified cluster.
|
default ListServicesPublisher |
listServicesPaginator()
Lists the services that are running in a specified cluster.
|
default ListServicesPublisher |
listServicesPaginator(Consumer<ListServicesRequest.Builder> listServicesRequest)
Lists the services that are running in a specified cluster.
|
default ListServicesPublisher |
listServicesPaginator(ListServicesRequest listServicesRequest)
Lists the services that are running in a specified cluster.
|
default CompletableFuture<ListTagsForResourceResponse> |
listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
List the tags for an Amazon ECS resource.
|
default CompletableFuture<ListTagsForResourceResponse> |
listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
List the tags for an Amazon ECS resource.
|
default CompletableFuture<ListTaskDefinitionFamiliesResponse> |
listTaskDefinitionFamilies()
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any
ACTIVE task definition revisions). |
default CompletableFuture<ListTaskDefinitionFamiliesResponse> |
listTaskDefinitionFamilies(Consumer<ListTaskDefinitionFamiliesRequest.Builder> listTaskDefinitionFamiliesRequest)
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any
ACTIVE task definition revisions). |
default CompletableFuture<ListTaskDefinitionFamiliesResponse> |
listTaskDefinitionFamilies(ListTaskDefinitionFamiliesRequest listTaskDefinitionFamiliesRequest)
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any
ACTIVE task definition revisions). |
default ListTaskDefinitionFamiliesPublisher |
listTaskDefinitionFamiliesPaginator()
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any
ACTIVE task definition revisions). |
default ListTaskDefinitionFamiliesPublisher |
listTaskDefinitionFamiliesPaginator(Consumer<ListTaskDefinitionFamiliesRequest.Builder> listTaskDefinitionFamiliesRequest)
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any
ACTIVE task definition revisions). |
default ListTaskDefinitionFamiliesPublisher |
listTaskDefinitionFamiliesPaginator(ListTaskDefinitionFamiliesRequest listTaskDefinitionFamiliesRequest)
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any
ACTIVE task definition revisions). |
default CompletableFuture<ListTaskDefinitionsResponse> |
listTaskDefinitions()
Returns a list of task definitions that are registered to your account.
|
default CompletableFuture<ListTaskDefinitionsResponse> |
listTaskDefinitions(Consumer<ListTaskDefinitionsRequest.Builder> listTaskDefinitionsRequest)
Returns a list of task definitions that are registered to your account.
|
default CompletableFuture<ListTaskDefinitionsResponse> |
listTaskDefinitions(ListTaskDefinitionsRequest listTaskDefinitionsRequest)
Returns a list of task definitions that are registered to your account.
|
default ListTaskDefinitionsPublisher |
listTaskDefinitionsPaginator()
Returns a list of task definitions that are registered to your account.
|
default ListTaskDefinitionsPublisher |
listTaskDefinitionsPaginator(Consumer<ListTaskDefinitionsRequest.Builder> listTaskDefinitionsRequest)
Returns a list of task definitions that are registered to your account.
|
default ListTaskDefinitionsPublisher |
listTaskDefinitionsPaginator(ListTaskDefinitionsRequest listTaskDefinitionsRequest)
Returns a list of task definitions that are registered to your account.
|
default CompletableFuture<ListTasksResponse> |
listTasks()
Returns a list of tasks for a specified cluster.
|
default CompletableFuture<ListTasksResponse> |
listTasks(Consumer<ListTasksRequest.Builder> listTasksRequest)
Returns a list of tasks for a specified cluster.
|
default CompletableFuture<ListTasksResponse> |
listTasks(ListTasksRequest listTasksRequest)
Returns a list of tasks for a specified cluster.
|
default ListTasksPublisher |
listTasksPaginator()
Returns a list of tasks for a specified cluster.
|
default ListTasksPublisher |
listTasksPaginator(Consumer<ListTasksRequest.Builder> listTasksRequest)
Returns a list of tasks for a specified cluster.
|
default ListTasksPublisher |
listTasksPaginator(ListTasksRequest listTasksRequest)
Returns a list of tasks for a specified cluster.
|
default CompletableFuture<PutAccountSettingResponse> |
putAccountSetting(Consumer<PutAccountSettingRequest.Builder> putAccountSettingRequest)
Modifies an account setting.
|
default CompletableFuture<PutAccountSettingResponse> |
putAccountSetting(PutAccountSettingRequest putAccountSettingRequest)
Modifies an account setting.
|
default CompletableFuture<PutAccountSettingDefaultResponse> |
putAccountSettingDefault(Consumer<PutAccountSettingDefaultRequest.Builder> putAccountSettingDefaultRequest)
Modifies an account setting for all IAM users on an account for whom no individual account setting has been
specified.
|
default CompletableFuture<PutAccountSettingDefaultResponse> |
putAccountSettingDefault(PutAccountSettingDefaultRequest putAccountSettingDefaultRequest)
Modifies an account setting for all IAM users on an account for whom no individual account setting has been
specified.
|
default CompletableFuture<PutAttributesResponse> |
putAttributes(Consumer<PutAttributesRequest.Builder> putAttributesRequest)
Create or update an attribute on an Amazon ECS resource.
|
default CompletableFuture<PutAttributesResponse> |
putAttributes(PutAttributesRequest putAttributesRequest)
Create or update an attribute on an Amazon ECS resource.
|
default CompletableFuture<PutClusterCapacityProvidersResponse> |
putClusterCapacityProviders(Consumer<PutClusterCapacityProvidersRequest.Builder> putClusterCapacityProvidersRequest)
Modifies the available capacity providers and the default capacity provider strategy for a cluster.
|
default CompletableFuture<PutClusterCapacityProvidersResponse> |
putClusterCapacityProviders(PutClusterCapacityProvidersRequest putClusterCapacityProvidersRequest)
Modifies the available capacity providers and the default capacity provider strategy for a cluster.
|
default CompletableFuture<RegisterContainerInstanceResponse> |
registerContainerInstance(Consumer<RegisterContainerInstanceRequest.Builder> registerContainerInstanceRequest)
|
default CompletableFuture<RegisterContainerInstanceResponse> |
registerContainerInstance(RegisterContainerInstanceRequest registerContainerInstanceRequest)
|
default CompletableFuture<RegisterTaskDefinitionResponse> |
registerTaskDefinition(Consumer<RegisterTaskDefinitionRequest.Builder> registerTaskDefinitionRequest)
Registers a new task definition from the supplied
family and containerDefinitions. |
default CompletableFuture<RegisterTaskDefinitionResponse> |
registerTaskDefinition(RegisterTaskDefinitionRequest registerTaskDefinitionRequest)
Registers a new task definition from the supplied
family and containerDefinitions. |
default CompletableFuture<RunTaskResponse> |
runTask(Consumer<RunTaskRequest.Builder> runTaskRequest)
Starts a new task using the specified task definition.
|
default CompletableFuture<RunTaskResponse> |
runTask(RunTaskRequest runTaskRequest)
Starts a new task using the specified task definition.
|
default CompletableFuture<StartTaskResponse> |
startTask(Consumer<StartTaskRequest.Builder> startTaskRequest)
Starts a new task from the specified task definition on the specified container instance or instances.
|
default CompletableFuture<StartTaskResponse> |
startTask(StartTaskRequest startTaskRequest)
Starts a new task from the specified task definition on the specified container instance or instances.
|
default CompletableFuture<StopTaskResponse> |
stopTask(Consumer<StopTaskRequest.Builder> stopTaskRequest)
Stops a running task.
|
default CompletableFuture<StopTaskResponse> |
stopTask(StopTaskRequest stopTaskRequest)
Stops a running task.
|
default CompletableFuture<SubmitAttachmentStateChangesResponse> |
submitAttachmentStateChanges(Consumer<SubmitAttachmentStateChangesRequest.Builder> submitAttachmentStateChangesRequest)
|
default CompletableFuture<SubmitAttachmentStateChangesResponse> |
submitAttachmentStateChanges(SubmitAttachmentStateChangesRequest submitAttachmentStateChangesRequest)
|
default CompletableFuture<SubmitContainerStateChangeResponse> |
submitContainerStateChange(Consumer<SubmitContainerStateChangeRequest.Builder> submitContainerStateChangeRequest)
|
default CompletableFuture<SubmitContainerStateChangeResponse> |
submitContainerStateChange(SubmitContainerStateChangeRequest submitContainerStateChangeRequest)
|
default CompletableFuture<SubmitTaskStateChangeResponse> |
submitTaskStateChange(Consumer<SubmitTaskStateChangeRequest.Builder> submitTaskStateChangeRequest)
|
default CompletableFuture<SubmitTaskStateChangeResponse> |
submitTaskStateChange(SubmitTaskStateChangeRequest submitTaskStateChangeRequest)
|
default CompletableFuture<TagResourceResponse> |
tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
Associates the specified tags to a resource with the specified
resourceArn. |
default CompletableFuture<TagResourceResponse> |
tagResource(TagResourceRequest tagResourceRequest)
Associates the specified tags to a resource with the specified
resourceArn. |
default CompletableFuture<UntagResourceResponse> |
untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
Deletes specified tags from a resource.
|
default CompletableFuture<UntagResourceResponse> |
untagResource(UntagResourceRequest untagResourceRequest)
Deletes specified tags from a resource.
|
default CompletableFuture<UpdateCapacityProviderResponse> |
updateCapacityProvider(Consumer<UpdateCapacityProviderRequest.Builder> updateCapacityProviderRequest)
Modifies the parameters for a capacity provider.
|
default CompletableFuture<UpdateCapacityProviderResponse> |
updateCapacityProvider(UpdateCapacityProviderRequest updateCapacityProviderRequest)
Modifies the parameters for a capacity provider.
|
default CompletableFuture<UpdateClusterResponse> |
updateCluster(Consumer<UpdateClusterRequest.Builder> updateClusterRequest)
Updates the cluster.
|
default CompletableFuture<UpdateClusterResponse> |
updateCluster(UpdateClusterRequest updateClusterRequest)
Updates the cluster.
|
default CompletableFuture<UpdateClusterSettingsResponse> |
updateClusterSettings(Consumer<UpdateClusterSettingsRequest.Builder> updateClusterSettingsRequest)
Modifies the settings to use for a cluster.
|
default CompletableFuture<UpdateClusterSettingsResponse> |
updateClusterSettings(UpdateClusterSettingsRequest updateClusterSettingsRequest)
Modifies the settings to use for a cluster.
|
default CompletableFuture<UpdateContainerAgentResponse> |
updateContainerAgent(Consumer<UpdateContainerAgentRequest.Builder> updateContainerAgentRequest)
Updates the Amazon ECS container agent on a specified container instance.
|
default CompletableFuture<UpdateContainerAgentResponse> |
updateContainerAgent(UpdateContainerAgentRequest updateContainerAgentRequest)
Updates the Amazon ECS container agent on a specified container instance.
|
default CompletableFuture<UpdateContainerInstancesStateResponse> |
updateContainerInstancesState(Consumer<UpdateContainerInstancesStateRequest.Builder> updateContainerInstancesStateRequest)
Modifies the status of an Amazon ECS container instance.
|
default CompletableFuture<UpdateContainerInstancesStateResponse> |
updateContainerInstancesState(UpdateContainerInstancesStateRequest updateContainerInstancesStateRequest)
Modifies the status of an Amazon ECS container instance.
|
default CompletableFuture<UpdateServiceResponse> |
updateService(Consumer<UpdateServiceRequest.Builder> updateServiceRequest)
|
default CompletableFuture<UpdateServiceResponse> |
updateService(UpdateServiceRequest updateServiceRequest)
|
default CompletableFuture<UpdateServicePrimaryTaskSetResponse> |
updateServicePrimaryTaskSet(Consumer<UpdateServicePrimaryTaskSetRequest.Builder> updateServicePrimaryTaskSetRequest)
Modifies which task set in a service is the primary task set.
|
default CompletableFuture<UpdateServicePrimaryTaskSetResponse> |
updateServicePrimaryTaskSet(UpdateServicePrimaryTaskSetRequest updateServicePrimaryTaskSetRequest)
Modifies which task set in a service is the primary task set.
|
default CompletableFuture<UpdateTaskSetResponse> |
updateTaskSet(Consumer<UpdateTaskSetRequest.Builder> updateTaskSetRequest)
Modifies a task set.
|
default CompletableFuture<UpdateTaskSetResponse> |
updateTaskSet(UpdateTaskSetRequest updateTaskSetRequest)
Modifies a task set.
|
default EcsAsyncWaiter |
waiter()
Create an instance of
EcsAsyncWaiter using this client. |
serviceNameclosestatic final String SERVICE_NAME
static final String SERVICE_METADATA_ID
ServiceMetadataProvider.static EcsAsyncClient create()
EcsAsyncClient with the region loaded from the
DefaultAwsRegionProviderChain and credentials loaded from the
DefaultCredentialsProvider.static EcsAsyncClientBuilder builder()
EcsAsyncClient.default CompletableFuture<CreateCapacityProviderResponse> createCapacityProvider(CreateCapacityProviderRequest createCapacityProviderRequest)
Creates a new capacity provider. Capacity providers are associated with an Amazon ECS cluster and are used in capacity provider strategies to facilitate cluster auto scaling.
Only capacity providers using an Auto Scaling group can be created. Amazon ECS tasks on AWS Fargate use the
FARGATE and FARGATE_SPOT capacity providers which are already created and available to
all accounts in Regions supported by AWS Fargate.
createCapacityProviderRequest - PENDING or STAGING, the update process can get
stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.default CompletableFuture<CreateCapacityProviderResponse> createCapacityProvider(Consumer<CreateCapacityProviderRequest.Builder> createCapacityProviderRequest)
Creates a new capacity provider. Capacity providers are associated with an Amazon ECS cluster and are used in capacity provider strategies to facilitate cluster auto scaling.
Only capacity providers using an Auto Scaling group can be created. Amazon ECS tasks on AWS Fargate use the
FARGATE and FARGATE_SPOT capacity providers which are already created and available to
all accounts in Regions supported by AWS Fargate.
This is a convenience which creates an instance of the CreateCapacityProviderRequest.Builder avoiding the
need to create one manually via CreateCapacityProviderRequest.builder()
createCapacityProviderRequest - A Consumer that will call methods on CreateCapacityProviderRequest.Builder to create a
request.PENDING or STAGING, the update process can get
stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.default CompletableFuture<CreateClusterResponse> createCluster(CreateClusterRequest createClusterRequest)
Creates a new Amazon ECS cluster. By default, your account receives a default cluster when you
launch your first container instance. However, you can create your own cluster with a unique name with the
CreateCluster action.
When you call the CreateCluster API operation, Amazon ECS attempts to create the Amazon ECS service-linked role for your account so that required resources in other AWS services can be managed on your behalf. However, if the IAM user that makes the call does not have permissions to create the service-linked role, it is not created. For more information, see Using Service-Linked Roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
createClusterRequest - default CompletableFuture<CreateClusterResponse> createCluster(Consumer<CreateClusterRequest.Builder> createClusterRequest)
Creates a new Amazon ECS cluster. By default, your account receives a default cluster when you
launch your first container instance. However, you can create your own cluster with a unique name with the
CreateCluster action.
When you call the CreateCluster API operation, Amazon ECS attempts to create the Amazon ECS service-linked role for your account so that required resources in other AWS services can be managed on your behalf. However, if the IAM user that makes the call does not have permissions to create the service-linked role, it is not created. For more information, see Using Service-Linked Roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the CreateClusterRequest.Builder avoiding the need to
create one manually via CreateClusterRequest.builder()
createClusterRequest - A Consumer that will call methods on CreateClusterRequest.Builder to create a request.default CompletableFuture<CreateClusterResponse> createCluster()
Creates a new Amazon ECS cluster. By default, your account receives a default cluster when you
launch your first container instance. However, you can create your own cluster with a unique name with the
CreateCluster action.
When you call the CreateCluster API operation, Amazon ECS attempts to create the Amazon ECS service-linked role for your account so that required resources in other AWS services can be managed on your behalf. However, if the IAM user that makes the call does not have permissions to create the service-linked role, it is not created. For more information, see Using Service-Linked Roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
default CompletableFuture<CreateServiceResponse> createService(CreateServiceRequest createServiceRequest)
Runs and maintains a desired number of tasks from a specified task definition. If the number of tasks running in
a service drops below the desiredCount, Amazon ECS runs another copy of the task in the specified
cluster. To update an existing service, see the UpdateService action.
In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind one or more load balancers. The load balancers distribute traffic across the tasks that are associated with the service. For more information, see Service Load Balancing in the Amazon Elastic Container Service Developer Guide.
Tasks for services that do not use a load balancer are considered healthy if they're in the
RUNNING state. Tasks for services that do use a load balancer are considered healthy if
they're in the RUNNING state and the container instance that they're hosted on is reported as
healthy by the load balancer.
There are two service scheduler strategies available:
REPLICA - The replica scheduling strategy places and maintains the desired number of tasks across
your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task
placement strategies and constraints to customize task placement decisions. For more information, see Service Scheduler
Concepts in the Amazon Elastic Container Service Developer Guide.
DAEMON - The daemon scheduling strategy deploys exactly one task on each active container instance
that meets all of the task placement constraints that you specify in your cluster. The service scheduler also
evaluates the task placement constraints for running tasks and will stop tasks that do not meet the placement
constraints. When using this strategy, you don't need to specify a desired number of tasks, a task placement
strategy, or use Service Auto Scaling policies. For more information, see Service Scheduler
Concepts in the Amazon Elastic Container Service Developer Guide.
You can optionally specify a deployment configuration for your service. The deployment is triggered by changing
properties, such as the task definition or the desired count of a service, with an UpdateService
operation. The default value for a replica service for minimumHealthyPercent is 100%. The default
value for a daemon service for minimumHealthyPercent is 0%.
If a service is using the ECS deployment controller, the minimum healthy percent represents a lower
limit on the number of tasks in a service that must remain in the RUNNING state during a deployment,
as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container
instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This
parameter enables you to deploy without using additional cluster capacity. For example, if your service has a
desired number of four tasks and a minimum healthy percent of 50%, the scheduler might stop two existing tasks to
free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer
are considered healthy if they're in the RUNNING state. Tasks for services that do use a load
balancer are considered healthy if they're in the RUNNING state and they're reported as healthy by
the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the ECS deployment controller, the maximum percent parameter represents
an upper limit on the number of tasks in a service that are allowed in the RUNNING or
PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to
the nearest integer), and while any container instances are in the DRAINING state if the service
contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For
example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler
may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do
this are available). The default value for maximum percent is 200%.
If a service is using either the CODE_DEPLOY or EXTERNAL deployment controller types
and tasks that use the EC2 launch type, the minimum healthy percent and maximum percent values are
used only to define the lower and upper limit on the number of the tasks in the service that remain in the
RUNNING state while the container instances are in the DRAINING state. If the tasks in
the service use the Fargate launch type, the minimum healthy percent and maximum percent values aren't used,
although they're currently visible when describing your service.
When creating a service that uses the EXTERNAL deployment controller, you can specify only
parameters that aren't controlled at the task set level. The only required parameter is the service name. You
control your services using the CreateTaskSet operation. For more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
When the service scheduler launches new tasks, it determines task placement in your cluster using the following logic:
Determine which of the container instances in your cluster can support your service's task definition (for example, they have the required CPU, memory, ports, and container instance attributes).
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner (although
you can choose a different placement strategy) with the placementStrategy parameter):
Sort the valid container instances, giving priority to instances that have the fewest number of running tasks for this service in their respective Availability Zone. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
createServiceRequest - default CompletableFuture<CreateServiceResponse> createService(Consumer<CreateServiceRequest.Builder> createServiceRequest)
Runs and maintains a desired number of tasks from a specified task definition. If the number of tasks running in
a service drops below the desiredCount, Amazon ECS runs another copy of the task in the specified
cluster. To update an existing service, see the UpdateService action.
In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind one or more load balancers. The load balancers distribute traffic across the tasks that are associated with the service. For more information, see Service Load Balancing in the Amazon Elastic Container Service Developer Guide.
Tasks for services that do not use a load balancer are considered healthy if they're in the
RUNNING state. Tasks for services that do use a load balancer are considered healthy if
they're in the RUNNING state and the container instance that they're hosted on is reported as
healthy by the load balancer.
There are two service scheduler strategies available:
REPLICA - The replica scheduling strategy places and maintains the desired number of tasks across
your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task
placement strategies and constraints to customize task placement decisions. For more information, see Service Scheduler
Concepts in the Amazon Elastic Container Service Developer Guide.
DAEMON - The daemon scheduling strategy deploys exactly one task on each active container instance
that meets all of the task placement constraints that you specify in your cluster. The service scheduler also
evaluates the task placement constraints for running tasks and will stop tasks that do not meet the placement
constraints. When using this strategy, you don't need to specify a desired number of tasks, a task placement
strategy, or use Service Auto Scaling policies. For more information, see Service Scheduler
Concepts in the Amazon Elastic Container Service Developer Guide.
You can optionally specify a deployment configuration for your service. The deployment is triggered by changing
properties, such as the task definition or the desired count of a service, with an UpdateService
operation. The default value for a replica service for minimumHealthyPercent is 100%. The default
value for a daemon service for minimumHealthyPercent is 0%.
If a service is using the ECS deployment controller, the minimum healthy percent represents a lower
limit on the number of tasks in a service that must remain in the RUNNING state during a deployment,
as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container
instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This
parameter enables you to deploy without using additional cluster capacity. For example, if your service has a
desired number of four tasks and a minimum healthy percent of 50%, the scheduler might stop two existing tasks to
free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer
are considered healthy if they're in the RUNNING state. Tasks for services that do use a load
balancer are considered healthy if they're in the RUNNING state and they're reported as healthy by
the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the ECS deployment controller, the maximum percent parameter represents
an upper limit on the number of tasks in a service that are allowed in the RUNNING or
PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to
the nearest integer), and while any container instances are in the DRAINING state if the service
contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For
example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler
may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do
this are available). The default value for maximum percent is 200%.
If a service is using either the CODE_DEPLOY or EXTERNAL deployment controller types
and tasks that use the EC2 launch type, the minimum healthy percent and maximum percent values are
used only to define the lower and upper limit on the number of the tasks in the service that remain in the
RUNNING state while the container instances are in the DRAINING state. If the tasks in
the service use the Fargate launch type, the minimum healthy percent and maximum percent values aren't used,
although they're currently visible when describing your service.
When creating a service that uses the EXTERNAL deployment controller, you can specify only
parameters that aren't controlled at the task set level. The only required parameter is the service name. You
control your services using the CreateTaskSet operation. For more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
When the service scheduler launches new tasks, it determines task placement in your cluster using the following logic:
Determine which of the container instances in your cluster can support your service's task definition (for example, they have the required CPU, memory, ports, and container instance attributes).
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner (although
you can choose a different placement strategy) with the placementStrategy parameter):
Sort the valid container instances, giving priority to instances that have the fewest number of running tasks for this service in their respective Availability Zone. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
This is a convenience which creates an instance of the CreateServiceRequest.Builder avoiding the need to
create one manually via CreateServiceRequest.builder()
createServiceRequest - A Consumer that will call methods on CreateServiceRequest.Builder to create a request.default CompletableFuture<CreateTaskSetResponse> createTaskSet(CreateTaskSetRequest createTaskSetRequest)
Create a task set in the specified cluster and service. This is used when a service uses the
EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
createTaskSetRequest - default CompletableFuture<CreateTaskSetResponse> createTaskSet(Consumer<CreateTaskSetRequest.Builder> createTaskSetRequest)
Create a task set in the specified cluster and service. This is used when a service uses the
EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the CreateTaskSetRequest.Builder avoiding the need to
create one manually via CreateTaskSetRequest.builder()
createTaskSetRequest - A Consumer that will call methods on CreateTaskSetRequest.Builder to create a request.default CompletableFuture<DeleteAccountSettingResponse> deleteAccountSetting(DeleteAccountSettingRequest deleteAccountSettingRequest)
Disables an account setting for a specified IAM user, IAM role, or the root user for an account.
deleteAccountSettingRequest - default CompletableFuture<DeleteAccountSettingResponse> deleteAccountSetting(Consumer<DeleteAccountSettingRequest.Builder> deleteAccountSettingRequest)
Disables an account setting for a specified IAM user, IAM role, or the root user for an account.
This is a convenience which creates an instance of the DeleteAccountSettingRequest.Builder avoiding the
need to create one manually via DeleteAccountSettingRequest.builder()
deleteAccountSettingRequest - A Consumer that will call methods on DeleteAccountSettingRequest.Builder to create a
request.default CompletableFuture<DeleteAttributesResponse> deleteAttributes(DeleteAttributesRequest deleteAttributesRequest)
Deletes one or more custom attributes from an Amazon ECS resource.
deleteAttributesRequest - default CompletableFuture<DeleteAttributesResponse> deleteAttributes(Consumer<DeleteAttributesRequest.Builder> deleteAttributesRequest)
Deletes one or more custom attributes from an Amazon ECS resource.
This is a convenience which creates an instance of the DeleteAttributesRequest.Builder avoiding the need
to create one manually via DeleteAttributesRequest.builder()
deleteAttributesRequest - A Consumer that will call methods on DeleteAttributesRequest.Builder to create a request.default CompletableFuture<DeleteCapacityProviderResponse> deleteCapacityProvider(DeleteCapacityProviderRequest deleteCapacityProviderRequest)
Deletes the specified capacity provider.
The FARGATE and FARGATE_SPOT capacity providers are reserved and cannot be deleted. You
can disassociate them from a cluster using either the PutClusterCapacityProviders API or by deleting the
cluster.
Prior to a capacity provider being deleted, the capacity provider must be removed from the capacity provider
strategy from all services. The UpdateService API can be used to remove a capacity provider from a
service's capacity provider strategy. When updating a service, the forceNewDeployment option can be
used to ensure that any tasks using the Amazon EC2 instance capacity provided by the capacity provider are
transitioned to use the capacity from the remaining capacity providers. Only capacity providers that are not
associated with a cluster can be deleted. To remove a capacity provider from a cluster, you can either use
PutClusterCapacityProviders or delete the cluster.
deleteCapacityProviderRequest - default CompletableFuture<DeleteCapacityProviderResponse> deleteCapacityProvider(Consumer<DeleteCapacityProviderRequest.Builder> deleteCapacityProviderRequest)
Deletes the specified capacity provider.
The FARGATE and FARGATE_SPOT capacity providers are reserved and cannot be deleted. You
can disassociate them from a cluster using either the PutClusterCapacityProviders API or by deleting the
cluster.
Prior to a capacity provider being deleted, the capacity provider must be removed from the capacity provider
strategy from all services. The UpdateService API can be used to remove a capacity provider from a
service's capacity provider strategy. When updating a service, the forceNewDeployment option can be
used to ensure that any tasks using the Amazon EC2 instance capacity provided by the capacity provider are
transitioned to use the capacity from the remaining capacity providers. Only capacity providers that are not
associated with a cluster can be deleted. To remove a capacity provider from a cluster, you can either use
PutClusterCapacityProviders or delete the cluster.
This is a convenience which creates an instance of the DeleteCapacityProviderRequest.Builder avoiding the
need to create one manually via DeleteCapacityProviderRequest.builder()
deleteCapacityProviderRequest - A Consumer that will call methods on DeleteCapacityProviderRequest.Builder to create a
request.default CompletableFuture<DeleteClusterResponse> deleteCluster(DeleteClusterRequest deleteClusterRequest)
Deletes the specified cluster. The cluster will transition to the INACTIVE state. Clusters with an
INACTIVE status may remain discoverable in your account for a period of time. However, this behavior
is subject to change in the future, so you should not rely on INACTIVE clusters persisting.
You must deregister all container instances from this cluster before you may delete it. You can list the container instances in a cluster with ListContainerInstances and deregister them with DeregisterContainerInstance.
deleteClusterRequest - PENDING or STAGING, the update process can get
stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.default CompletableFuture<DeleteClusterResponse> deleteCluster(Consumer<DeleteClusterRequest.Builder> deleteClusterRequest)
Deletes the specified cluster. The cluster will transition to the INACTIVE state. Clusters with an
INACTIVE status may remain discoverable in your account for a period of time. However, this behavior
is subject to change in the future, so you should not rely on INACTIVE clusters persisting.
You must deregister all container instances from this cluster before you may delete it. You can list the container instances in a cluster with ListContainerInstances and deregister them with DeregisterContainerInstance.
This is a convenience which creates an instance of the DeleteClusterRequest.Builder avoiding the need to
create one manually via DeleteClusterRequest.builder()
deleteClusterRequest - A Consumer that will call methods on DeleteClusterRequest.Builder to create a request.PENDING or STAGING, the update process can get
stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.default CompletableFuture<DeleteServiceResponse> deleteService(DeleteServiceRequest deleteServiceRequest)
Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the desired task count is zero. If the service is actively maintaining tasks, you cannot delete it, and you must update the service to a desired task count of zero. For more information, see UpdateService.
When you delete a service, if there are still running tasks that require cleanup, the service status moves from
ACTIVE to DRAINING, and the service is no longer visible in the console or in the
ListServices API operation. After all tasks have transitioned to either STOPPING or
STOPPED status, the service status moves from DRAINING to INACTIVE.
Services in the DRAINING or INACTIVE status can still be viewed with the
DescribeServices API operation. However, in the future, INACTIVE services may be cleaned up
and purged from Amazon ECS record keeping, and DescribeServices calls on those services return a
ServiceNotFoundException error.
If you attempt to create a new service with the same name as an existing service in either ACTIVE or
DRAINING status, you receive an error.
deleteServiceRequest - default CompletableFuture<DeleteServiceResponse> deleteService(Consumer<DeleteServiceRequest.Builder> deleteServiceRequest)
Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the desired task count is zero. If the service is actively maintaining tasks, you cannot delete it, and you must update the service to a desired task count of zero. For more information, see UpdateService.
When you delete a service, if there are still running tasks that require cleanup, the service status moves from
ACTIVE to DRAINING, and the service is no longer visible in the console or in the
ListServices API operation. After all tasks have transitioned to either STOPPING or
STOPPED status, the service status moves from DRAINING to INACTIVE.
Services in the DRAINING or INACTIVE status can still be viewed with the
DescribeServices API operation. However, in the future, INACTIVE services may be cleaned up
and purged from Amazon ECS record keeping, and DescribeServices calls on those services return a
ServiceNotFoundException error.
If you attempt to create a new service with the same name as an existing service in either ACTIVE or
DRAINING status, you receive an error.
This is a convenience which creates an instance of the DeleteServiceRequest.Builder avoiding the need to
create one manually via DeleteServiceRequest.builder()
deleteServiceRequest - A Consumer that will call methods on DeleteServiceRequest.Builder to create a request.default CompletableFuture<DeleteTaskSetResponse> deleteTaskSet(DeleteTaskSetRequest deleteTaskSetRequest)
Deletes a specified task set within a service. This is used when a service uses the EXTERNAL
deployment controller type. For more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
deleteTaskSetRequest - default CompletableFuture<DeleteTaskSetResponse> deleteTaskSet(Consumer<DeleteTaskSetRequest.Builder> deleteTaskSetRequest)
Deletes a specified task set within a service. This is used when a service uses the EXTERNAL
deployment controller type. For more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the DeleteTaskSetRequest.Builder avoiding the need to
create one manually via DeleteTaskSetRequest.builder()
deleteTaskSetRequest - A Consumer that will call methods on DeleteTaskSetRequest.Builder to create a request.default CompletableFuture<DeregisterContainerInstanceResponse> deregisterContainerInstance(DeregisterContainerInstanceRequest deregisterContainerInstanceRequest)
Deregisters an Amazon ECS container instance from the specified cluster. This instance is no longer available to run tasks.
If you intend to use the container instance for some other purpose after deregistration, you should stop all of the tasks running on the container instance before deregistration. That prevents any orphaned tasks from consuming resources.
Deregistering a container instance removes the instance from a cluster, but it does not terminate the EC2 instance. If you are finished using the instance, be sure to terminate it in the Amazon EC2 console to stop billing.
If you terminate a running container instance, Amazon ECS automatically deregisters the instance from your cluster (stopped container instances or instances with disconnected agents are not automatically deregistered when terminated).
deregisterContainerInstanceRequest - default CompletableFuture<DeregisterContainerInstanceResponse> deregisterContainerInstance(Consumer<DeregisterContainerInstanceRequest.Builder> deregisterContainerInstanceRequest)
Deregisters an Amazon ECS container instance from the specified cluster. This instance is no longer available to run tasks.
If you intend to use the container instance for some other purpose after deregistration, you should stop all of the tasks running on the container instance before deregistration. That prevents any orphaned tasks from consuming resources.
Deregistering a container instance removes the instance from a cluster, but it does not terminate the EC2 instance. If you are finished using the instance, be sure to terminate it in the Amazon EC2 console to stop billing.
If you terminate a running container instance, Amazon ECS automatically deregisters the instance from your cluster (stopped container instances or instances with disconnected agents are not automatically deregistered when terminated).
This is a convenience which creates an instance of the DeregisterContainerInstanceRequest.Builder
avoiding the need to create one manually via DeregisterContainerInstanceRequest.builder()
deregisterContainerInstanceRequest - A Consumer that will call methods on DeregisterContainerInstanceRequest.Builder to create
a request.default CompletableFuture<DeregisterTaskDefinitionResponse> deregisterTaskDefinition(DeregisterTaskDefinitionRequest deregisterTaskDefinitionRequest)
Deregisters the specified task definition by family and revision. Upon deregistration, the task definition is
marked as INACTIVE. Existing tasks and services that reference an INACTIVE task
definition continue to run without disruption. Existing services that reference an INACTIVE task
definition can still scale up or down by modifying the service's desired count.
You cannot use an INACTIVE task definition to run new tasks or create new services, and you cannot
update an existing service to reference an INACTIVE task definition. However, there may be up to a
10-minute window following deregistration where these restrictions have not yet taken effect.
At this time, INACTIVE task definitions remain discoverable in your account indefinitely. However,
this behavior is subject to change in the future, so you should not rely on INACTIVE task
definitions persisting beyond the lifecycle of any associated tasks and services.
deregisterTaskDefinitionRequest - default CompletableFuture<DeregisterTaskDefinitionResponse> deregisterTaskDefinition(Consumer<DeregisterTaskDefinitionRequest.Builder> deregisterTaskDefinitionRequest)
Deregisters the specified task definition by family and revision. Upon deregistration, the task definition is
marked as INACTIVE. Existing tasks and services that reference an INACTIVE task
definition continue to run without disruption. Existing services that reference an INACTIVE task
definition can still scale up or down by modifying the service's desired count.
You cannot use an INACTIVE task definition to run new tasks or create new services, and you cannot
update an existing service to reference an INACTIVE task definition. However, there may be up to a
10-minute window following deregistration where these restrictions have not yet taken effect.
At this time, INACTIVE task definitions remain discoverable in your account indefinitely. However,
this behavior is subject to change in the future, so you should not rely on INACTIVE task
definitions persisting beyond the lifecycle of any associated tasks and services.
This is a convenience which creates an instance of the DeregisterTaskDefinitionRequest.Builder avoiding
the need to create one manually via DeregisterTaskDefinitionRequest.builder()
deregisterTaskDefinitionRequest - A Consumer that will call methods on DeregisterTaskDefinitionRequest.Builder to create a
request.default CompletableFuture<DescribeCapacityProvidersResponse> describeCapacityProviders(DescribeCapacityProvidersRequest describeCapacityProvidersRequest)
Describes one or more of your capacity providers.
describeCapacityProvidersRequest - default CompletableFuture<DescribeCapacityProvidersResponse> describeCapacityProviders(Consumer<DescribeCapacityProvidersRequest.Builder> describeCapacityProvidersRequest)
Describes one or more of your capacity providers.
This is a convenience which creates an instance of the DescribeCapacityProvidersRequest.Builder avoiding
the need to create one manually via DescribeCapacityProvidersRequest.builder()
describeCapacityProvidersRequest - A Consumer that will call methods on DescribeCapacityProvidersRequest.Builder to create a
request.default CompletableFuture<DescribeClustersResponse> describeClusters(DescribeClustersRequest describeClustersRequest)
Describes one or more of your clusters.
describeClustersRequest - default CompletableFuture<DescribeClustersResponse> describeClusters(Consumer<DescribeClustersRequest.Builder> describeClustersRequest)
Describes one or more of your clusters.
This is a convenience which creates an instance of the DescribeClustersRequest.Builder avoiding the need
to create one manually via DescribeClustersRequest.builder()
describeClustersRequest - A Consumer that will call methods on DescribeClustersRequest.Builder to create a request.default CompletableFuture<DescribeClustersResponse> describeClusters()
Describes one or more of your clusters.
default CompletableFuture<DescribeContainerInstancesResponse> describeContainerInstances(DescribeContainerInstancesRequest describeContainerInstancesRequest)
Describes Amazon Elastic Container Service container instances. Returns metadata about registered and remaining resources on each container instance requested.
describeContainerInstancesRequest - default CompletableFuture<DescribeContainerInstancesResponse> describeContainerInstances(Consumer<DescribeContainerInstancesRequest.Builder> describeContainerInstancesRequest)
Describes Amazon Elastic Container Service container instances. Returns metadata about registered and remaining resources on each container instance requested.
This is a convenience which creates an instance of the DescribeContainerInstancesRequest.Builder avoiding
the need to create one manually via DescribeContainerInstancesRequest.builder()
describeContainerInstancesRequest - A Consumer that will call methods on DescribeContainerInstancesRequest.Builder to create a
request.default CompletableFuture<DescribeServicesResponse> describeServices(DescribeServicesRequest describeServicesRequest)
Describes the specified services running in your cluster.
describeServicesRequest - default CompletableFuture<DescribeServicesResponse> describeServices(Consumer<DescribeServicesRequest.Builder> describeServicesRequest)
Describes the specified services running in your cluster.
This is a convenience which creates an instance of the DescribeServicesRequest.Builder avoiding the need
to create one manually via DescribeServicesRequest.builder()
describeServicesRequest - A Consumer that will call methods on DescribeServicesRequest.Builder to create a request.default CompletableFuture<DescribeTaskDefinitionResponse> describeTaskDefinition(DescribeTaskDefinitionRequest describeTaskDefinitionRequest)
Describes a task definition. You can specify a family and revision to find information
about a specific task definition, or you can simply specify the family to find the latest ACTIVE
revision in that family.
You can only describe INACTIVE task definitions while an active task or service references them.
describeTaskDefinitionRequest - default CompletableFuture<DescribeTaskDefinitionResponse> describeTaskDefinition(Consumer<DescribeTaskDefinitionRequest.Builder> describeTaskDefinitionRequest)
Describes a task definition. You can specify a family and revision to find information
about a specific task definition, or you can simply specify the family to find the latest ACTIVE
revision in that family.
You can only describe INACTIVE task definitions while an active task or service references them.
This is a convenience which creates an instance of the DescribeTaskDefinitionRequest.Builder avoiding the
need to create one manually via DescribeTaskDefinitionRequest.builder()
describeTaskDefinitionRequest - A Consumer that will call methods on DescribeTaskDefinitionRequest.Builder to create a
request.default CompletableFuture<DescribeTaskSetsResponse> describeTaskSets(DescribeTaskSetsRequest describeTaskSetsRequest)
Describes the task sets in the specified cluster and service. This is used when a service uses the
EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
describeTaskSetsRequest - default CompletableFuture<DescribeTaskSetsResponse> describeTaskSets(Consumer<DescribeTaskSetsRequest.Builder> describeTaskSetsRequest)
Describes the task sets in the specified cluster and service. This is used when a service uses the
EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the DescribeTaskSetsRequest.Builder avoiding the need
to create one manually via DescribeTaskSetsRequest.builder()
describeTaskSetsRequest - A Consumer that will call methods on DescribeTaskSetsRequest.Builder to create a request.default CompletableFuture<DescribeTasksResponse> describeTasks(DescribeTasksRequest describeTasksRequest)
Describes a specified task or tasks.
describeTasksRequest - default CompletableFuture<DescribeTasksResponse> describeTasks(Consumer<DescribeTasksRequest.Builder> describeTasksRequest)
Describes a specified task or tasks.
This is a convenience which creates an instance of the DescribeTasksRequest.Builder avoiding the need to
create one manually via DescribeTasksRequest.builder()
describeTasksRequest - A Consumer that will call methods on DescribeTasksRequest.Builder to create a request.default CompletableFuture<DiscoverPollEndpointResponse> discoverPollEndpoint(DiscoverPollEndpointRequest discoverPollEndpointRequest)
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Returns an endpoint for the Amazon ECS agent to poll for updates.
discoverPollEndpointRequest - default CompletableFuture<DiscoverPollEndpointResponse> discoverPollEndpoint(Consumer<DiscoverPollEndpointRequest.Builder> discoverPollEndpointRequest)
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Returns an endpoint for the Amazon ECS agent to poll for updates.
This is a convenience which creates an instance of the DiscoverPollEndpointRequest.Builder avoiding the
need to create one manually via DiscoverPollEndpointRequest.builder()
discoverPollEndpointRequest - A Consumer that will call methods on DiscoverPollEndpointRequest.Builder to create a
request.default CompletableFuture<ExecuteCommandResponse> executeCommand(ExecuteCommandRequest executeCommandRequest)
Runs a command remotely on a container within a task.
executeCommandRequest - default CompletableFuture<ExecuteCommandResponse> executeCommand(Consumer<ExecuteCommandRequest.Builder> executeCommandRequest)
Runs a command remotely on a container within a task.
This is a convenience which creates an instance of the ExecuteCommandRequest.Builder avoiding the need to
create one manually via ExecuteCommandRequest.builder()
executeCommandRequest - A Consumer that will call methods on ExecuteCommandRequest.Builder to create a request.default CompletableFuture<ListAccountSettingsResponse> listAccountSettings(ListAccountSettingsRequest listAccountSettingsRequest)
Lists the account settings for a specified principal.
listAccountSettingsRequest - default CompletableFuture<ListAccountSettingsResponse> listAccountSettings(Consumer<ListAccountSettingsRequest.Builder> listAccountSettingsRequest)
Lists the account settings for a specified principal.
This is a convenience which creates an instance of the ListAccountSettingsRequest.Builder avoiding the
need to create one manually via ListAccountSettingsRequest.builder()
listAccountSettingsRequest - A Consumer that will call methods on ListAccountSettingsRequest.Builder to create a
request.default CompletableFuture<ListAccountSettingsResponse> listAccountSettings()
Lists the account settings for a specified principal.
default ListAccountSettingsPublisher listAccountSettingsPaginator()
Lists the account settings for a specified principal.
This is a variant of
listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsPublisher publisher = client.listAccountSettingsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsPublisher publisher = client.listAccountSettingsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation.
default ListAccountSettingsPublisher listAccountSettingsPaginator(ListAccountSettingsRequest listAccountSettingsRequest)
Lists the account settings for a specified principal.
This is a variant of
listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsPublisher publisher = client.listAccountSettingsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsPublisher publisher = client.listAccountSettingsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation.
listAccountSettingsRequest - default ListAccountSettingsPublisher listAccountSettingsPaginator(Consumer<ListAccountSettingsRequest.Builder> listAccountSettingsRequest)
Lists the account settings for a specified principal.
This is a variant of
listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsPublisher publisher = client.listAccountSettingsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsPublisher publisher = client.listAccountSettingsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation.
This is a convenience which creates an instance of the ListAccountSettingsRequest.Builder avoiding the
need to create one manually via ListAccountSettingsRequest.builder()
listAccountSettingsRequest - A Consumer that will call methods on ListAccountSettingsRequest.Builder to create a
request.default CompletableFuture<ListAttributesResponse> listAttributes(ListAttributesRequest listAttributesRequest)
Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a
target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute
on each resource. You can filter the list of results to a single attribute name to only return results that have
that name. You can also filter the results by attribute name and value, for example, to see which container
instances in a cluster are running a Linux AMI (ecs.os-type=linux).
listAttributesRequest - default CompletableFuture<ListAttributesResponse> listAttributes(Consumer<ListAttributesRequest.Builder> listAttributesRequest)
Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a
target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute
on each resource. You can filter the list of results to a single attribute name to only return results that have
that name. You can also filter the results by attribute name and value, for example, to see which container
instances in a cluster are running a Linux AMI (ecs.os-type=linux).
This is a convenience which creates an instance of the ListAttributesRequest.Builder avoiding the need to
create one manually via ListAttributesRequest.builder()
listAttributesRequest - A Consumer that will call methods on ListAttributesRequest.Builder to create a request.default ListAttributesPublisher listAttributesPaginator(ListAttributesRequest listAttributesRequest)
Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a
target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute
on each resource. You can filter the list of results to a single attribute name to only return results that have
that name. You can also filter the results by attribute name and value, for example, to see which container
instances in a cluster are running a Linux AMI (ecs.os-type=linux).
This is a variant of listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListAttributesPublisher publisher = client.listAttributesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListAttributesPublisher publisher = client.listAttributesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListAttributesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListAttributesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest) operation.
listAttributesRequest - default ListAttributesPublisher listAttributesPaginator(Consumer<ListAttributesRequest.Builder> listAttributesRequest)
Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a
target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute
on each resource. You can filter the list of results to a single attribute name to only return results that have
that name. You can also filter the results by attribute name and value, for example, to see which container
instances in a cluster are running a Linux AMI (ecs.os-type=linux).
This is a variant of listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListAttributesPublisher publisher = client.listAttributesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListAttributesPublisher publisher = client.listAttributesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListAttributesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListAttributesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest) operation.
This is a convenience which creates an instance of the ListAttributesRequest.Builder avoiding the need to
create one manually via ListAttributesRequest.builder()
listAttributesRequest - A Consumer that will call methods on ListAttributesRequest.Builder to create a request.default CompletableFuture<ListClustersResponse> listClusters(ListClustersRequest listClustersRequest)
Returns a list of existing clusters.
listClustersRequest - default CompletableFuture<ListClustersResponse> listClusters(Consumer<ListClustersRequest.Builder> listClustersRequest)
Returns a list of existing clusters.
This is a convenience which creates an instance of the ListClustersRequest.Builder avoiding the need to
create one manually via ListClustersRequest.builder()
listClustersRequest - A Consumer that will call methods on ListClustersRequest.Builder to create a request.default CompletableFuture<ListClustersResponse> listClusters()
Returns a list of existing clusters.
default ListClustersPublisher listClustersPaginator()
Returns a list of existing clusters.
This is a variant of listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListClustersPublisher publisher = client.listClustersPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListClustersPublisher publisher = client.listClustersPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListClustersResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListClustersResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation.
default ListClustersPublisher listClustersPaginator(ListClustersRequest listClustersRequest)
Returns a list of existing clusters.
This is a variant of listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListClustersPublisher publisher = client.listClustersPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListClustersPublisher publisher = client.listClustersPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListClustersResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListClustersResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation.
listClustersRequest - default ListClustersPublisher listClustersPaginator(Consumer<ListClustersRequest.Builder> listClustersRequest)
Returns a list of existing clusters.
This is a variant of listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListClustersPublisher publisher = client.listClustersPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListClustersPublisher publisher = client.listClustersPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListClustersResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListClustersResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation.
This is a convenience which creates an instance of the ListClustersRequest.Builder avoiding the need to
create one manually via ListClustersRequest.builder()
listClustersRequest - A Consumer that will call methods on ListClustersRequest.Builder to create a request.default CompletableFuture<ListContainerInstancesResponse> listContainerInstances(ListContainerInstancesRequest listContainerInstancesRequest)
Returns a list of container instances in a specified cluster. You can filter the results of a
ListContainerInstances operation with cluster query language statements inside the
filter parameter. For more information, see Cluster Query
Language in the Amazon Elastic Container Service Developer Guide.
listContainerInstancesRequest - default CompletableFuture<ListContainerInstancesResponse> listContainerInstances(Consumer<ListContainerInstancesRequest.Builder> listContainerInstancesRequest)
Returns a list of container instances in a specified cluster. You can filter the results of a
ListContainerInstances operation with cluster query language statements inside the
filter parameter. For more information, see Cluster Query
Language in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the ListContainerInstancesRequest.Builder avoiding the
need to create one manually via ListContainerInstancesRequest.builder()
listContainerInstancesRequest - A Consumer that will call methods on ListContainerInstancesRequest.Builder to create a
request.default CompletableFuture<ListContainerInstancesResponse> listContainerInstances()
Returns a list of container instances in a specified cluster. You can filter the results of a
ListContainerInstances operation with cluster query language statements inside the
filter parameter. For more information, see Cluster Query
Language in the Amazon Elastic Container Service Developer Guide.
default ListContainerInstancesPublisher listContainerInstancesPaginator()
Returns a list of container instances in a specified cluster. You can filter the results of a
ListContainerInstances operation with cluster query language statements inside the
filter parameter. For more information, see Cluster Query
Language in the Amazon Elastic Container Service Developer Guide.
This is a variant of
listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesPublisher publisher = client.listContainerInstancesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesPublisher publisher = client.listContainerInstancesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)
operation.
default ListContainerInstancesPublisher listContainerInstancesPaginator(ListContainerInstancesRequest listContainerInstancesRequest)
Returns a list of container instances in a specified cluster. You can filter the results of a
ListContainerInstances operation with cluster query language statements inside the
filter parameter. For more information, see Cluster Query
Language in the Amazon Elastic Container Service Developer Guide.
This is a variant of
listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesPublisher publisher = client.listContainerInstancesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesPublisher publisher = client.listContainerInstancesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)
operation.
listContainerInstancesRequest - default ListContainerInstancesPublisher listContainerInstancesPaginator(Consumer<ListContainerInstancesRequest.Builder> listContainerInstancesRequest)
Returns a list of container instances in a specified cluster. You can filter the results of a
ListContainerInstances operation with cluster query language statements inside the
filter parameter. For more information, see Cluster Query
Language in the Amazon Elastic Container Service Developer Guide.
This is a variant of
listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesPublisher publisher = client.listContainerInstancesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesPublisher publisher = client.listContainerInstancesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest)
operation.
This is a convenience which creates an instance of the ListContainerInstancesRequest.Builder avoiding the
need to create one manually via ListContainerInstancesRequest.builder()
listContainerInstancesRequest - A Consumer that will call methods on ListContainerInstancesRequest.Builder to create a
request.default CompletableFuture<ListServicesResponse> listServices(ListServicesRequest listServicesRequest)
Lists the services that are running in a specified cluster.
listServicesRequest - default CompletableFuture<ListServicesResponse> listServices(Consumer<ListServicesRequest.Builder> listServicesRequest)
Lists the services that are running in a specified cluster.
This is a convenience which creates an instance of the ListServicesRequest.Builder avoiding the need to
create one manually via ListServicesRequest.builder()
listServicesRequest - A Consumer that will call methods on ListServicesRequest.Builder to create a request.default CompletableFuture<ListServicesResponse> listServices()
Lists the services that are running in a specified cluster.
default ListServicesPublisher listServicesPaginator()
Lists the services that are running in a specified cluster.
This is a variant of listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListServicesPublisher publisher = client.listServicesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListServicesPublisher publisher = client.listServicesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListServicesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListServicesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation.
default ListServicesPublisher listServicesPaginator(ListServicesRequest listServicesRequest)
Lists the services that are running in a specified cluster.
This is a variant of listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListServicesPublisher publisher = client.listServicesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListServicesPublisher publisher = client.listServicesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListServicesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListServicesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation.
listServicesRequest - default ListServicesPublisher listServicesPaginator(Consumer<ListServicesRequest.Builder> listServicesRequest)
Lists the services that are running in a specified cluster.
This is a variant of listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListServicesPublisher publisher = client.listServicesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListServicesPublisher publisher = client.listServicesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListServicesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListServicesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation.
This is a convenience which creates an instance of the ListServicesRequest.Builder avoiding the need to
create one manually via ListServicesRequest.builder()
listServicesRequest - A Consumer that will call methods on ListServicesRequest.Builder to create a request.default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
List the tags for an Amazon ECS resource.
listTagsForResourceRequest - default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
List the tags for an Amazon ECS resource.
This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the
need to create one manually via ListTagsForResourceRequest.builder()
listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a
request.default CompletableFuture<ListTaskDefinitionFamiliesResponse> listTaskDefinitionFamilies(ListTaskDefinitionFamiliesRequest listTaskDefinitionFamiliesRequest)
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any ACTIVE task definition revisions).
You can filter out task definition families that do not contain any ACTIVE task definition revisions
by setting the status parameter to ACTIVE. You can also filter the results with the
familyPrefix parameter.
listTaskDefinitionFamiliesRequest - default CompletableFuture<ListTaskDefinitionFamiliesResponse> listTaskDefinitionFamilies(Consumer<ListTaskDefinitionFamiliesRequest.Builder> listTaskDefinitionFamiliesRequest)
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any ACTIVE task definition revisions).
You can filter out task definition families that do not contain any ACTIVE task definition revisions
by setting the status parameter to ACTIVE. You can also filter the results with the
familyPrefix parameter.
This is a convenience which creates an instance of the ListTaskDefinitionFamiliesRequest.Builder avoiding
the need to create one manually via ListTaskDefinitionFamiliesRequest.builder()
listTaskDefinitionFamiliesRequest - A Consumer that will call methods on ListTaskDefinitionFamiliesRequest.Builder to create a
request.default CompletableFuture<ListTaskDefinitionFamiliesResponse> listTaskDefinitionFamilies()
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any ACTIVE task definition revisions).
You can filter out task definition families that do not contain any ACTIVE task definition revisions
by setting the status parameter to ACTIVE. You can also filter the results with the
familyPrefix parameter.
default ListTaskDefinitionFamiliesPublisher listTaskDefinitionFamiliesPaginator()
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any ACTIVE task definition revisions).
You can filter out task definition families that do not contain any ACTIVE task definition revisions
by setting the status parameter to ACTIVE. You can also filter the results with the
familyPrefix parameter.
This is a variant of
listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesPublisher publisher = client.listTaskDefinitionFamiliesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesPublisher publisher = client.listTaskDefinitionFamiliesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)
operation.
default ListTaskDefinitionFamiliesPublisher listTaskDefinitionFamiliesPaginator(ListTaskDefinitionFamiliesRequest listTaskDefinitionFamiliesRequest)
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any ACTIVE task definition revisions).
You can filter out task definition families that do not contain any ACTIVE task definition revisions
by setting the status parameter to ACTIVE. You can also filter the results with the
familyPrefix parameter.
This is a variant of
listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesPublisher publisher = client.listTaskDefinitionFamiliesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesPublisher publisher = client.listTaskDefinitionFamiliesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)
operation.
listTaskDefinitionFamiliesRequest - default ListTaskDefinitionFamiliesPublisher listTaskDefinitionFamiliesPaginator(Consumer<ListTaskDefinitionFamiliesRequest.Builder> listTaskDefinitionFamiliesRequest)
Returns a list of task definition families that are registered to your account (which may include task definition
families that no longer have any ACTIVE task definition revisions).
You can filter out task definition families that do not contain any ACTIVE task definition revisions
by setting the status parameter to ACTIVE. You can also filter the results with the
familyPrefix parameter.
This is a variant of
listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesPublisher publisher = client.listTaskDefinitionFamiliesPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesPublisher publisher = client.listTaskDefinitionFamiliesPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest)
operation.
This is a convenience which creates an instance of the ListTaskDefinitionFamiliesRequest.Builder avoiding
the need to create one manually via ListTaskDefinitionFamiliesRequest.builder()
listTaskDefinitionFamiliesRequest - A Consumer that will call methods on ListTaskDefinitionFamiliesRequest.Builder to create a
request.default CompletableFuture<ListTaskDefinitionsResponse> listTaskDefinitions(ListTaskDefinitionsRequest listTaskDefinitionsRequest)
Returns a list of task definitions that are registered to your account. You can filter the results by family name
with the familyPrefix parameter or by status with the status parameter.
listTaskDefinitionsRequest - default CompletableFuture<ListTaskDefinitionsResponse> listTaskDefinitions(Consumer<ListTaskDefinitionsRequest.Builder> listTaskDefinitionsRequest)
Returns a list of task definitions that are registered to your account. You can filter the results by family name
with the familyPrefix parameter or by status with the status parameter.
This is a convenience which creates an instance of the ListTaskDefinitionsRequest.Builder avoiding the
need to create one manually via ListTaskDefinitionsRequest.builder()
listTaskDefinitionsRequest - A Consumer that will call methods on ListTaskDefinitionsRequest.Builder to create a
request.default CompletableFuture<ListTaskDefinitionsResponse> listTaskDefinitions()
Returns a list of task definitions that are registered to your account. You can filter the results by family name
with the familyPrefix parameter or by status with the status parameter.
default ListTaskDefinitionsPublisher listTaskDefinitionsPaginator()
Returns a list of task definitions that are registered to your account. You can filter the results by family name
with the familyPrefix parameter or by status with the status parameter.
This is a variant of
listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsPublisher publisher = client.listTaskDefinitionsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsPublisher publisher = client.listTaskDefinitionsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation.
default ListTaskDefinitionsPublisher listTaskDefinitionsPaginator(ListTaskDefinitionsRequest listTaskDefinitionsRequest)
Returns a list of task definitions that are registered to your account. You can filter the results by family name
with the familyPrefix parameter or by status with the status parameter.
This is a variant of
listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsPublisher publisher = client.listTaskDefinitionsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsPublisher publisher = client.listTaskDefinitionsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation.
listTaskDefinitionsRequest - default ListTaskDefinitionsPublisher listTaskDefinitionsPaginator(Consumer<ListTaskDefinitionsRequest.Builder> listTaskDefinitionsRequest)
Returns a list of task definitions that are registered to your account. You can filter the results by family name
with the familyPrefix parameter or by status with the status parameter.
This is a variant of
listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsPublisher publisher = client.listTaskDefinitionsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsPublisher publisher = client.listTaskDefinitionsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation.
This is a convenience which creates an instance of the ListTaskDefinitionsRequest.Builder avoiding the
need to create one manually via ListTaskDefinitionsRequest.builder()
listTaskDefinitionsRequest - A Consumer that will call methods on ListTaskDefinitionsRequest.Builder to create a
request.default CompletableFuture<ListTasksResponse> listTasks(ListTasksRequest listTasksRequest)
Returns a list of tasks for a specified cluster. You can filter the results by family name, by a particular
container instance, or by the desired status of the task with the family,
containerInstance, and desiredStatus parameters.
Recently stopped tasks might appear in the returned results. Currently, stopped tasks appear in the returned results for at least one hour.
listTasksRequest - default CompletableFuture<ListTasksResponse> listTasks(Consumer<ListTasksRequest.Builder> listTasksRequest)
Returns a list of tasks for a specified cluster. You can filter the results by family name, by a particular
container instance, or by the desired status of the task with the family,
containerInstance, and desiredStatus parameters.
Recently stopped tasks might appear in the returned results. Currently, stopped tasks appear in the returned results for at least one hour.
This is a convenience which creates an instance of the ListTasksRequest.Builder avoiding the need to
create one manually via ListTasksRequest.builder()
listTasksRequest - A Consumer that will call methods on ListTasksRequest.Builder to create a request.default CompletableFuture<ListTasksResponse> listTasks()
Returns a list of tasks for a specified cluster. You can filter the results by family name, by a particular
container instance, or by the desired status of the task with the family,
containerInstance, and desiredStatus parameters.
Recently stopped tasks might appear in the returned results. Currently, stopped tasks appear in the returned results for at least one hour.
default ListTasksPublisher listTasksPaginator()
Returns a list of tasks for a specified cluster. You can filter the results by family name, by a particular
container instance, or by the desired status of the task with the family,
containerInstance, and desiredStatus parameters.
Recently stopped tasks might appear in the returned results. Currently, stopped tasks appear in the returned results for at least one hour.
This is a variant of listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.
The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListTasksPublisher publisher = client.listTasksPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListTasksPublisher publisher = client.listTasksPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListTasksResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListTasksResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.
default ListTasksPublisher listTasksPaginator(ListTasksRequest listTasksRequest)
Returns a list of tasks for a specified cluster. You can filter the results by family name, by a particular
container instance, or by the desired status of the task with the family,
containerInstance, and desiredStatus parameters.
Recently stopped tasks might appear in the returned results. Currently, stopped tasks appear in the returned results for at least one hour.
This is a variant of listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.
The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListTasksPublisher publisher = client.listTasksPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListTasksPublisher publisher = client.listTasksPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListTasksResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListTasksResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.
listTasksRequest - default ListTasksPublisher listTasksPaginator(Consumer<ListTasksRequest.Builder> listTasksRequest)
Returns a list of tasks for a specified cluster. You can filter the results by family name, by a particular
container instance, or by the desired status of the task with the family,
containerInstance, and desiredStatus parameters.
Recently stopped tasks might appear in the returned results. Currently, stopped tasks appear in the returned results for at least one hour.
This is a variant of listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.
The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.ecs.paginators.ListTasksPublisher publisher = client.listTasksPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.ecs.paginators.ListTasksPublisher publisher = client.listTasksPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.ecs.model.ListTasksResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.ecs.model.ListTasksResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.
This is a convenience which creates an instance of the ListTasksRequest.Builder avoiding the need to
create one manually via ListTasksRequest.builder()
listTasksRequest - A Consumer that will call methods on ListTasksRequest.Builder to create a request.default CompletableFuture<PutAccountSettingResponse> putAccountSetting(PutAccountSettingRequest putAccountSettingRequest)
Modifies an account setting. Account settings are set on a per-Region basis.
If you change the account setting for the root user, the default settings for all of the IAM users and roles for which no individual account setting has been specified are reset. For more information, see Account Settings in the Amazon Elastic Container Service Developer Guide.
When serviceLongArnFormat, taskLongArnFormat, or
containerInstanceLongArnFormat are specified, the Amazon Resource Name (ARN) and resource ID format
of the resource type for a specified IAM user, IAM role, or the root user for an account is affected. The opt-in
and opt-out account setting must be set for each Amazon ECS resource separately. The ARN and resource ID format
of a resource will be defined by the opt-in status of the IAM user or role that created the resource. You must
enable this setting to use Amazon ECS features such as resource tagging.
When awsvpcTrunking is specified, the elastic network interface (ENI) limit for any new container
instances that support the feature is changed. If awsvpcTrunking is enabled, any new container
instances that support the feature are launched have the increased ENI limits available to them. For more
information, see Elastic Network
Interface Trunking in the Amazon Elastic Container Service Developer Guide.
When containerInsights is specified, the default setting indicating whether CloudWatch Container
Insights is enabled for your clusters is changed. If containerInsights is enabled, any new clusters
that are created will have Container Insights enabled unless you disable it during cluster creation. For more
information, see CloudWatch
Container Insights in the Amazon Elastic Container Service Developer Guide.
putAccountSettingRequest - default CompletableFuture<PutAccountSettingResponse> putAccountSetting(Consumer<PutAccountSettingRequest.Builder> putAccountSettingRequest)
Modifies an account setting. Account settings are set on a per-Region basis.
If you change the account setting for the root user, the default settings for all of the IAM users and roles for which no individual account setting has been specified are reset. For more information, see Account Settings in the Amazon Elastic Container Service Developer Guide.
When serviceLongArnFormat, taskLongArnFormat, or
containerInstanceLongArnFormat are specified, the Amazon Resource Name (ARN) and resource ID format
of the resource type for a specified IAM user, IAM role, or the root user for an account is affected. The opt-in
and opt-out account setting must be set for each Amazon ECS resource separately. The ARN and resource ID format
of a resource will be defined by the opt-in status of the IAM user or role that created the resource. You must
enable this setting to use Amazon ECS features such as resource tagging.
When awsvpcTrunking is specified, the elastic network interface (ENI) limit for any new container
instances that support the feature is changed. If awsvpcTrunking is enabled, any new container
instances that support the feature are launched have the increased ENI limits available to them. For more
information, see Elastic Network
Interface Trunking in the Amazon Elastic Container Service Developer Guide.
When containerInsights is specified, the default setting indicating whether CloudWatch Container
Insights is enabled for your clusters is changed. If containerInsights is enabled, any new clusters
that are created will have Container Insights enabled unless you disable it during cluster creation. For more
information, see CloudWatch
Container Insights in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the PutAccountSettingRequest.Builder avoiding the need
to create one manually via PutAccountSettingRequest.builder()
putAccountSettingRequest - A Consumer that will call methods on PutAccountSettingRequest.Builder to create a request.default CompletableFuture<PutAccountSettingDefaultResponse> putAccountSettingDefault(PutAccountSettingDefaultRequest putAccountSettingDefaultRequest)
Modifies an account setting for all IAM users on an account for whom no individual account setting has been specified. Account settings are set on a per-Region basis.
putAccountSettingDefaultRequest - default CompletableFuture<PutAccountSettingDefaultResponse> putAccountSettingDefault(Consumer<PutAccountSettingDefaultRequest.Builder> putAccountSettingDefaultRequest)
Modifies an account setting for all IAM users on an account for whom no individual account setting has been specified. Account settings are set on a per-Region basis.
This is a convenience which creates an instance of the PutAccountSettingDefaultRequest.Builder avoiding
the need to create one manually via PutAccountSettingDefaultRequest.builder()
putAccountSettingDefaultRequest - A Consumer that will call methods on PutAccountSettingDefaultRequest.Builder to create a
request.default CompletableFuture<PutAttributesResponse> putAttributes(PutAttributesRequest putAttributesRequest)
Create or update an attribute on an Amazon ECS resource. If the attribute does not exist, it is created. If the attribute exists, its value is replaced with the specified value. To delete an attribute, use DeleteAttributes. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide.
putAttributesRequest - default CompletableFuture<PutAttributesResponse> putAttributes(Consumer<PutAttributesRequest.Builder> putAttributesRequest)
Create or update an attribute on an Amazon ECS resource. If the attribute does not exist, it is created. If the attribute exists, its value is replaced with the specified value. To delete an attribute, use DeleteAttributes. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the PutAttributesRequest.Builder avoiding the need to
create one manually via PutAttributesRequest.builder()
putAttributesRequest - A Consumer that will call methods on PutAttributesRequest.Builder to create a request.default CompletableFuture<PutClusterCapacityProvidersResponse> putClusterCapacityProviders(PutClusterCapacityProvidersRequest putClusterCapacityProvidersRequest)
Modifies the available capacity providers and the default capacity provider strategy for a cluster.
You must specify both the available capacity providers and a default capacity provider strategy for the cluster. If the specified cluster has existing capacity providers associated with it, you must specify all existing capacity providers in addition to any new ones you want to add. Any existing capacity providers associated with a cluster that are omitted from a PutClusterCapacityProviders API call will be disassociated with the cluster. You can only disassociate an existing capacity provider from a cluster if it's not being used by any existing tasks.
When creating a service or running a task on a cluster, if no capacity provider or launch type is specified, then
the cluster's default capacity provider strategy is used. It is recommended to define a default capacity provider
strategy for your cluster, however you may specify an empty array ([]) to bypass defining a default
strategy.
putClusterCapacityProvidersRequest - PENDING or STAGING, the update process can get
stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.default CompletableFuture<PutClusterCapacityProvidersResponse> putClusterCapacityProviders(Consumer<PutClusterCapacityProvidersRequest.Builder> putClusterCapacityProvidersRequest)
Modifies the available capacity providers and the default capacity provider strategy for a cluster.
You must specify both the available capacity providers and a default capacity provider strategy for the cluster. If the specified cluster has existing capacity providers associated with it, you must specify all existing capacity providers in addition to any new ones you want to add. Any existing capacity providers associated with a cluster that are omitted from a PutClusterCapacityProviders API call will be disassociated with the cluster. You can only disassociate an existing capacity provider from a cluster if it's not being used by any existing tasks.
When creating a service or running a task on a cluster, if no capacity provider or launch type is specified, then
the cluster's default capacity provider strategy is used. It is recommended to define a default capacity provider
strategy for your cluster, however you may specify an empty array ([]) to bypass defining a default
strategy.
This is a convenience which creates an instance of the PutClusterCapacityProvidersRequest.Builder
avoiding the need to create one manually via PutClusterCapacityProvidersRequest.builder()
putClusterCapacityProvidersRequest - A Consumer that will call methods on PutClusterCapacityProvidersRequest.Builder to create
a request.PENDING or STAGING, the update process can get
stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.default CompletableFuture<RegisterContainerInstanceResponse> registerContainerInstance(RegisterContainerInstanceRequest registerContainerInstanceRequest)
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Registers an EC2 instance into the specified cluster. This instance becomes available to place containers on.
registerContainerInstanceRequest - default CompletableFuture<RegisterContainerInstanceResponse> registerContainerInstance(Consumer<RegisterContainerInstanceRequest.Builder> registerContainerInstanceRequest)
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Registers an EC2 instance into the specified cluster. This instance becomes available to place containers on.
This is a convenience which creates an instance of the RegisterContainerInstanceRequest.Builder avoiding
the need to create one manually via RegisterContainerInstanceRequest.builder()
registerContainerInstanceRequest - A Consumer that will call methods on RegisterContainerInstanceRequest.Builder to create a
request.default CompletableFuture<RegisterTaskDefinitionResponse> registerTaskDefinition(RegisterTaskDefinitionRequest registerTaskDefinitionRequest)
Registers a new task definition from the supplied family and containerDefinitions.
Optionally, you can add data volumes to your containers with the volumes parameter. For more
information about task definition parameters and defaults, see Amazon ECS Task
Definitions in the Amazon Elastic Container Service Developer Guide.
You can specify an IAM role for your task with the taskRoleArn parameter. When you specify an IAM
role for a task, its containers can then use the latest versions of the AWS CLI or SDKs to make API requests to
the AWS services that are specified in the IAM policy associated with the role. For more information, see IAM Roles for Tasks in
the Amazon Elastic Container Service Developer Guide.
You can specify a Docker networking mode for the containers in your task definition with the
networkMode parameter. The available network modes correspond to those described in Network settings in the Docker run
reference. If you specify the awsvpc network mode, the task is allocated an elastic network
interface, and you must specify a NetworkConfiguration when you create a service or run a task with the
task definition. For more information, see Task Networking in
the Amazon Elastic Container Service Developer Guide.
registerTaskDefinitionRequest - default CompletableFuture<RegisterTaskDefinitionResponse> registerTaskDefinition(Consumer<RegisterTaskDefinitionRequest.Builder> registerTaskDefinitionRequest)
Registers a new task definition from the supplied family and containerDefinitions.
Optionally, you can add data volumes to your containers with the volumes parameter. For more
information about task definition parameters and defaults, see Amazon ECS Task
Definitions in the Amazon Elastic Container Service Developer Guide.
You can specify an IAM role for your task with the taskRoleArn parameter. When you specify an IAM
role for a task, its containers can then use the latest versions of the AWS CLI or SDKs to make API requests to
the AWS services that are specified in the IAM policy associated with the role. For more information, see IAM Roles for Tasks in
the Amazon Elastic Container Service Developer Guide.
You can specify a Docker networking mode for the containers in your task definition with the
networkMode parameter. The available network modes correspond to those described in Network settings in the Docker run
reference. If you specify the awsvpc network mode, the task is allocated an elastic network
interface, and you must specify a NetworkConfiguration when you create a service or run a task with the
task definition. For more information, see Task Networking in
the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the RegisterTaskDefinitionRequest.Builder avoiding the
need to create one manually via RegisterTaskDefinitionRequest.builder()
registerTaskDefinitionRequest - A Consumer that will call methods on RegisterTaskDefinitionRequest.Builder to create a
request.default CompletableFuture<RunTaskResponse> runTask(RunTaskRequest runTaskRequest)
Starts a new task using the specified task definition.
You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement constraints and placement strategies. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.
Alternatively, you can use StartTask to use your own scheduler or place tasks manually on specific container instances.
The Amazon ECS API follows an eventual consistency model, due to the distributed nature of the system supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API command that immediately follows a previous API command.
To manage eventual consistency, you can do the following:
Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing gradually up to five minutes of wait time.
Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to about five minutes of wait time.
runTaskRequest - default CompletableFuture<RunTaskResponse> runTask(Consumer<RunTaskRequest.Builder> runTaskRequest)
Starts a new task using the specified task definition.
You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement constraints and placement strategies. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.
Alternatively, you can use StartTask to use your own scheduler or place tasks manually on specific container instances.
The Amazon ECS API follows an eventual consistency model, due to the distributed nature of the system supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API command that immediately follows a previous API command.
To manage eventual consistency, you can do the following:
Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing gradually up to five minutes of wait time.
Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to about five minutes of wait time.
This is a convenience which creates an instance of the RunTaskRequest.Builder avoiding the need to create
one manually via RunTaskRequest.builder()
runTaskRequest - A Consumer that will call methods on RunTaskRequest.Builder to create a request.default CompletableFuture<StartTaskResponse> startTask(StartTaskRequest startTaskRequest)
Starts a new task from the specified task definition on the specified container instance or instances.
Alternatively, you can use RunTask to place tasks for you. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.
startTaskRequest - default CompletableFuture<StartTaskResponse> startTask(Consumer<StartTaskRequest.Builder> startTaskRequest)
Starts a new task from the specified task definition on the specified container instance or instances.
Alternatively, you can use RunTask to place tasks for you. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the StartTaskRequest.Builder avoiding the need to
create one manually via StartTaskRequest.builder()
startTaskRequest - A Consumer that will call methods on StartTaskRequest.Builder to create a request.default CompletableFuture<StopTaskResponse> stopTask(StopTaskRequest stopTaskRequest)
Stops a running task. Any tags associated with the task will be deleted.
When StopTask is called on a task, the equivalent of docker stop is issued to the containers
running in the task. This results in a SIGTERM value and a default 30-second timeout, after which
the SIGKILL value is sent and the containers are forcibly stopped. If the container handles the
SIGTERM value gracefully and exits within 30 seconds from receiving it, no SIGKILL
value is sent.
The default 30-second timeout can be configured on the Amazon ECS container agent with the
ECS_CONTAINER_STOP_TIMEOUT variable. For more information, see Amazon ECS Container
Agent Configuration in the Amazon Elastic Container Service Developer Guide.
stopTaskRequest - default CompletableFuture<StopTaskResponse> stopTask(Consumer<StopTaskRequest.Builder> stopTaskRequest)
Stops a running task. Any tags associated with the task will be deleted.
When StopTask is called on a task, the equivalent of docker stop is issued to the containers
running in the task. This results in a SIGTERM value and a default 30-second timeout, after which
the SIGKILL value is sent and the containers are forcibly stopped. If the container handles the
SIGTERM value gracefully and exits within 30 seconds from receiving it, no SIGKILL
value is sent.
The default 30-second timeout can be configured on the Amazon ECS container agent with the
ECS_CONTAINER_STOP_TIMEOUT variable. For more information, see Amazon ECS Container
Agent Configuration in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the StopTaskRequest.Builder avoiding the need to
create one manually via StopTaskRequest.builder()
stopTaskRequest - A Consumer that will call methods on StopTaskRequest.Builder to create a request.default CompletableFuture<SubmitAttachmentStateChangesResponse> submitAttachmentStateChanges(SubmitAttachmentStateChangesRequest submitAttachmentStateChangesRequest)
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Sent to acknowledge that an attachment changed states.
submitAttachmentStateChangesRequest - default CompletableFuture<SubmitAttachmentStateChangesResponse> submitAttachmentStateChanges(Consumer<SubmitAttachmentStateChangesRequest.Builder> submitAttachmentStateChangesRequest)
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Sent to acknowledge that an attachment changed states.
This is a convenience which creates an instance of the SubmitAttachmentStateChangesRequest.Builder
avoiding the need to create one manually via SubmitAttachmentStateChangesRequest.builder()
submitAttachmentStateChangesRequest - A Consumer that will call methods on SubmitAttachmentStateChangesRequest.Builder to create
a request.default CompletableFuture<SubmitContainerStateChangeResponse> submitContainerStateChange(SubmitContainerStateChangeRequest submitContainerStateChangeRequest)
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Sent to acknowledge that a container changed states.
submitContainerStateChangeRequest - default CompletableFuture<SubmitContainerStateChangeResponse> submitContainerStateChange(Consumer<SubmitContainerStateChangeRequest.Builder> submitContainerStateChangeRequest)
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Sent to acknowledge that a container changed states.
This is a convenience which creates an instance of the SubmitContainerStateChangeRequest.Builder avoiding
the need to create one manually via SubmitContainerStateChangeRequest.builder()
submitContainerStateChangeRequest - A Consumer that will call methods on SubmitContainerStateChangeRequest.Builder to create a
request.default CompletableFuture<SubmitTaskStateChangeResponse> submitTaskStateChange(SubmitTaskStateChangeRequest submitTaskStateChangeRequest)
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Sent to acknowledge that a task changed states.
submitTaskStateChangeRequest - default CompletableFuture<SubmitTaskStateChangeResponse> submitTaskStateChange(Consumer<SubmitTaskStateChangeRequest.Builder> submitTaskStateChangeRequest)
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Sent to acknowledge that a task changed states.
This is a convenience which creates an instance of the SubmitTaskStateChangeRequest.Builder avoiding the
need to create one manually via SubmitTaskStateChangeRequest.builder()
submitTaskStateChangeRequest - A Consumer that will call methods on SubmitTaskStateChangeRequest.Builder to create a
request.default CompletableFuture<TagResourceResponse> tagResource(TagResourceRequest tagResourceRequest)
Associates the specified tags to a resource with the specified resourceArn. If existing tags on a
resource are not specified in the request parameters, they are not changed. When a resource is deleted, the tags
associated with that resource are deleted as well.
tagResourceRequest - default CompletableFuture<TagResourceResponse> tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
Associates the specified tags to a resource with the specified resourceArn. If existing tags on a
resource are not specified in the request parameters, they are not changed. When a resource is deleted, the tags
associated with that resource are deleted as well.
This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to
create one manually via TagResourceRequest.builder()
tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.default CompletableFuture<UntagResourceResponse> untagResource(UntagResourceRequest untagResourceRequest)
Deletes specified tags from a resource.
untagResourceRequest - default CompletableFuture<UntagResourceResponse> untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
Deletes specified tags from a resource.
This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to
create one manually via UntagResourceRequest.builder()
untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.default CompletableFuture<UpdateCapacityProviderResponse> updateCapacityProvider(UpdateCapacityProviderRequest updateCapacityProviderRequest)
Modifies the parameters for a capacity provider.
updateCapacityProviderRequest - default CompletableFuture<UpdateCapacityProviderResponse> updateCapacityProvider(Consumer<UpdateCapacityProviderRequest.Builder> updateCapacityProviderRequest)
Modifies the parameters for a capacity provider.
This is a convenience which creates an instance of the UpdateCapacityProviderRequest.Builder avoiding the
need to create one manually via UpdateCapacityProviderRequest.builder()
updateCapacityProviderRequest - A Consumer that will call methods on UpdateCapacityProviderRequest.Builder to create a
request.default CompletableFuture<UpdateClusterResponse> updateCluster(UpdateClusterRequest updateClusterRequest)
Updates the cluster.
updateClusterRequest - default CompletableFuture<UpdateClusterResponse> updateCluster(Consumer<UpdateClusterRequest.Builder> updateClusterRequest)
Updates the cluster.
This is a convenience which creates an instance of the UpdateClusterRequest.Builder avoiding the need to
create one manually via UpdateClusterRequest.builder()
updateClusterRequest - A Consumer that will call methods on UpdateClusterRequest.Builder to create a request.default CompletableFuture<UpdateClusterSettingsResponse> updateClusterSettings(UpdateClusterSettingsRequest updateClusterSettingsRequest)
Modifies the settings to use for a cluster.
updateClusterSettingsRequest - default CompletableFuture<UpdateClusterSettingsResponse> updateClusterSettings(Consumer<UpdateClusterSettingsRequest.Builder> updateClusterSettingsRequest)
Modifies the settings to use for a cluster.
This is a convenience which creates an instance of the UpdateClusterSettingsRequest.Builder avoiding the
need to create one manually via UpdateClusterSettingsRequest.builder()
updateClusterSettingsRequest - A Consumer that will call methods on UpdateClusterSettingsRequest.Builder to create a
request.default CompletableFuture<UpdateContainerAgentResponse> updateContainerAgent(UpdateContainerAgentRequest updateContainerAgentRequest)
Updates the Amazon ECS container agent on a specified container instance. Updating the Amazon ECS container agent does not interrupt running tasks or services on the container instance. The process for updating the agent differs depending on whether your container instance was launched with the Amazon ECS-optimized AMI or another operating system.
UpdateContainerAgent requires the Amazon ECS-optimized AMI or Amazon Linux with the
ecs-init service installed and running. For help updating the Amazon ECS container agent on other
operating systems, see Manually Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer
Guide.
updateContainerAgentRequest - PENDING or STAGING, the update process can get
stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.default CompletableFuture<UpdateContainerAgentResponse> updateContainerAgent(Consumer<UpdateContainerAgentRequest.Builder> updateContainerAgentRequest)
Updates the Amazon ECS container agent on a specified container instance. Updating the Amazon ECS container agent does not interrupt running tasks or services on the container instance. The process for updating the agent differs depending on whether your container instance was launched with the Amazon ECS-optimized AMI or another operating system.
UpdateContainerAgent requires the Amazon ECS-optimized AMI or Amazon Linux with the
ecs-init service installed and running. For help updating the Amazon ECS container agent on other
operating systems, see Manually Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer
Guide.
This is a convenience which creates an instance of the UpdateContainerAgentRequest.Builder avoiding the
need to create one manually via UpdateContainerAgentRequest.builder()
updateContainerAgentRequest - A Consumer that will call methods on UpdateContainerAgentRequest.Builder to create a
request.PENDING or STAGING, the update process can get
stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.default CompletableFuture<UpdateContainerInstancesStateResponse> updateContainerInstancesState(UpdateContainerInstancesStateRequest updateContainerInstancesStateRequest)
Modifies the status of an Amazon ECS container instance.
Once a container instance has reached an ACTIVE state, you can change the status of a container
instance to DRAINING to manually remove an instance from a cluster, for example to perform system
updates, update the Docker daemon, or scale down the cluster size.
A container instance cannot be changed to DRAINING until it has reached an ACTIVE
status. If the instance is in any other status, an error will be received.
When you set a container instance to DRAINING, Amazon ECS prevents new tasks from being scheduled
for placement on the container instance and replacement service tasks are started on other container instances in
the cluster if the resources are available. Service tasks on the container instance that are in the
PENDING state are stopped immediately.
Service tasks on the container instance that are in the RUNNING state are stopped and replaced
according to the service's deployment configuration parameters, minimumHealthyPercent and
maximumPercent. You can change the deployment configuration of your service using
UpdateService.
If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount
temporarily during task replacement. For example, desiredCount is four tasks, a minimum of 50%
allows the scheduler to stop two existing tasks before starting two new tasks. If the minimum is 100%, the
service scheduler can't remove existing tasks until the replacement tasks are considered healthy. Tasks for
services that do not use a load balancer are considered healthy if they are in the RUNNING state.
Tasks for services that use a load balancer are considered healthy if they are in the RUNNING state
and the container instance they are hosted on is reported as healthy by the load balancer.
The maximumPercent parameter represents an upper limit on the number of running tasks during task
replacement, which enables you to define the replacement batch size. For example, if desiredCount is
four tasks, a maximum of 200% starts four new tasks before stopping the four tasks to be drained, provided that
the cluster resources required to do this are available. If the maximum is 100%, then replacement tasks can't
start until the draining tasks have stopped.
Any PENDING or RUNNING tasks that do not belong to a service are not affected. You must
wait for them to finish or stop them manually.
A container instance has completed draining when it has no more RUNNING tasks. You can verify this
using ListTasks.
When a container instance has been drained, you can set a container instance to ACTIVE status and
once it has reached that status the Amazon ECS scheduler can begin scheduling tasks on the instance again.
updateContainerInstancesStateRequest - default CompletableFuture<UpdateContainerInstancesStateResponse> updateContainerInstancesState(Consumer<UpdateContainerInstancesStateRequest.Builder> updateContainerInstancesStateRequest)
Modifies the status of an Amazon ECS container instance.
Once a container instance has reached an ACTIVE state, you can change the status of a container
instance to DRAINING to manually remove an instance from a cluster, for example to perform system
updates, update the Docker daemon, or scale down the cluster size.
A container instance cannot be changed to DRAINING until it has reached an ACTIVE
status. If the instance is in any other status, an error will be received.
When you set a container instance to DRAINING, Amazon ECS prevents new tasks from being scheduled
for placement on the container instance and replacement service tasks are started on other container instances in
the cluster if the resources are available. Service tasks on the container instance that are in the
PENDING state are stopped immediately.
Service tasks on the container instance that are in the RUNNING state are stopped and replaced
according to the service's deployment configuration parameters, minimumHealthyPercent and
maximumPercent. You can change the deployment configuration of your service using
UpdateService.
If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount
temporarily during task replacement. For example, desiredCount is four tasks, a minimum of 50%
allows the scheduler to stop two existing tasks before starting two new tasks. If the minimum is 100%, the
service scheduler can't remove existing tasks until the replacement tasks are considered healthy. Tasks for
services that do not use a load balancer are considered healthy if they are in the RUNNING state.
Tasks for services that use a load balancer are considered healthy if they are in the RUNNING state
and the container instance they are hosted on is reported as healthy by the load balancer.
The maximumPercent parameter represents an upper limit on the number of running tasks during task
replacement, which enables you to define the replacement batch size. For example, if desiredCount is
four tasks, a maximum of 200% starts four new tasks before stopping the four tasks to be drained, provided that
the cluster resources required to do this are available. If the maximum is 100%, then replacement tasks can't
start until the draining tasks have stopped.
Any PENDING or RUNNING tasks that do not belong to a service are not affected. You must
wait for them to finish or stop them manually.
A container instance has completed draining when it has no more RUNNING tasks. You can verify this
using ListTasks.
When a container instance has been drained, you can set a container instance to ACTIVE status and
once it has reached that status the Amazon ECS scheduler can begin scheduling tasks on the instance again.
This is a convenience which creates an instance of the UpdateContainerInstancesStateRequest.Builder
avoiding the need to create one manually via UpdateContainerInstancesStateRequest.builder()
updateContainerInstancesStateRequest - A Consumer that will call methods on UpdateContainerInstancesStateRequest.Builder to
create a request.default CompletableFuture<UpdateServiceResponse> updateService(UpdateServiceRequest updateServiceRequest)
Updating the task placement strategies and constraints on an Amazon ECS service remains in preview and is a Beta Service as defined by and subject to the Beta Service Participation Service Terms located at https://aws.amazon.com/service-terms ("Beta Terms"). These Beta Terms apply to your participation in this preview.
Modifies the parameters of a service.
For services using the rolling update (ECS) deployment controller, the desired count, deployment
configuration, network configuration, task placement constraints and strategies, or task definition used can be
updated.
For services using the blue/green (CODE_DEPLOY) deployment controller, only the desired count,
deployment configuration, task placement constraints and strategies, and health check grace period can be updated
using this API. If the network configuration, platform version, or task definition need to be updated, a new AWS
CodeDeploy deployment should be created. For more information, see CreateDeployment
in the AWS CodeDeploy API Reference.
For services using an external deployment controller, you can update only the desired count, task placement constraints and strategies, and health check grace period using this API. If the launch type, load balancer, network configuration, platform version, or task definition need to be updated, you should create a new task set. For more information, see CreateTaskSet.
You can add to or subtract from the number of instantiations of a task definition in a service by specifying the
cluster that the service is running in and a new desiredCount parameter.
If you have updated the Docker image of your application, you can create a new task definition with that image and deploy it to your service. The service scheduler uses the minimum healthy percent and maximum percent parameters (in the service's deployment configuration) to determine the deployment strategy.
If your updated Docker image uses the same tag as what is in the existing task definition for your service (for
example, my_image:latest), you do not need to create a new revision of your task definition. You can
update the service using the forceNewDeployment option. The new tasks launched by the deployment
pull the current image/tag combination from your repository when they start.
You can also update the deployment configuration of a service. When a deployment is triggered by updating the
task definition of a service, the service scheduler uses the deployment configuration parameters,
minimumHealthyPercent and maximumPercent, to determine the deployment strategy.
If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount
temporarily during a deployment. For example, if desiredCount is four tasks, a minimum of 50% allows
the scheduler to stop two existing tasks before starting two new tasks. Tasks for services that do not use a load
balancer are considered healthy if they are in the RUNNING state. Tasks for services that use a load
balancer are considered healthy if they are in the RUNNING state and the container instance they are
hosted on is reported as healthy by the load balancer.
The maximumPercent parameter represents an upper limit on the number of running tasks during a
deployment, which enables you to define the deployment batch size. For example, if desiredCount is
four tasks, a maximum of 200% starts four new tasks before stopping the four older tasks (provided that the
cluster resources required to do this are available).
When UpdateService stops a task during a deployment, the equivalent of docker stop is issued
to the containers running in the task. This results in a SIGTERM and a 30-second timeout, after
which SIGKILL is sent and the containers are forcibly stopped. If the container handles the
SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.
When the service scheduler launches new tasks, it determines task placement in your cluster with the following logic:
Determine which of the container instances in your cluster can support your service's task definition (for example, they have the required CPU, memory, ports, and container instance attributes).
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner (although you can choose a different placement strategy):
Sort the valid container instances by the fewest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in your cluster using the following logic:
Sort the container instances by the largest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have two, container instances in either zone B or C are considered optimal for termination.
Stop the task on a container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the largest number of running tasks for this service.
updateServiceRequest - default CompletableFuture<UpdateServiceResponse> updateService(Consumer<UpdateServiceRequest.Builder> updateServiceRequest)
Updating the task placement strategies and constraints on an Amazon ECS service remains in preview and is a Beta Service as defined by and subject to the Beta Service Participation Service Terms located at https://aws.amazon.com/service-terms ("Beta Terms"). These Beta Terms apply to your participation in this preview.
Modifies the parameters of a service.
For services using the rolling update (ECS) deployment controller, the desired count, deployment
configuration, network configuration, task placement constraints and strategies, or task definition used can be
updated.
For services using the blue/green (CODE_DEPLOY) deployment controller, only the desired count,
deployment configuration, task placement constraints and strategies, and health check grace period can be updated
using this API. If the network configuration, platform version, or task definition need to be updated, a new AWS
CodeDeploy deployment should be created. For more information, see CreateDeployment
in the AWS CodeDeploy API Reference.
For services using an external deployment controller, you can update only the desired count, task placement constraints and strategies, and health check grace period using this API. If the launch type, load balancer, network configuration, platform version, or task definition need to be updated, you should create a new task set. For more information, see CreateTaskSet.
You can add to or subtract from the number of instantiations of a task definition in a service by specifying the
cluster that the service is running in and a new desiredCount parameter.
If you have updated the Docker image of your application, you can create a new task definition with that image and deploy it to your service. The service scheduler uses the minimum healthy percent and maximum percent parameters (in the service's deployment configuration) to determine the deployment strategy.
If your updated Docker image uses the same tag as what is in the existing task definition for your service (for
example, my_image:latest), you do not need to create a new revision of your task definition. You can
update the service using the forceNewDeployment option. The new tasks launched by the deployment
pull the current image/tag combination from your repository when they start.
You can also update the deployment configuration of a service. When a deployment is triggered by updating the
task definition of a service, the service scheduler uses the deployment configuration parameters,
minimumHealthyPercent and maximumPercent, to determine the deployment strategy.
If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount
temporarily during a deployment. For example, if desiredCount is four tasks, a minimum of 50% allows
the scheduler to stop two existing tasks before starting two new tasks. Tasks for services that do not use a load
balancer are considered healthy if they are in the RUNNING state. Tasks for services that use a load
balancer are considered healthy if they are in the RUNNING state and the container instance they are
hosted on is reported as healthy by the load balancer.
The maximumPercent parameter represents an upper limit on the number of running tasks during a
deployment, which enables you to define the deployment batch size. For example, if desiredCount is
four tasks, a maximum of 200% starts four new tasks before stopping the four older tasks (provided that the
cluster resources required to do this are available).
When UpdateService stops a task during a deployment, the equivalent of docker stop is issued
to the containers running in the task. This results in a SIGTERM and a 30-second timeout, after
which SIGKILL is sent and the containers are forcibly stopped. If the container handles the
SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.
When the service scheduler launches new tasks, it determines task placement in your cluster with the following logic:
Determine which of the container instances in your cluster can support your service's task definition (for example, they have the required CPU, memory, ports, and container instance attributes).
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner (although you can choose a different placement strategy):
Sort the valid container instances by the fewest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in your cluster using the following logic:
Sort the container instances by the largest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have two, container instances in either zone B or C are considered optimal for termination.
Stop the task on a container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the largest number of running tasks for this service.
This is a convenience which creates an instance of the UpdateServiceRequest.Builder avoiding the need to
create one manually via UpdateServiceRequest.builder()
updateServiceRequest - A Consumer that will call methods on UpdateServiceRequest.Builder to create a request.default CompletableFuture<UpdateServicePrimaryTaskSetResponse> updateServicePrimaryTaskSet(UpdateServicePrimaryTaskSetRequest updateServicePrimaryTaskSetRequest)
Modifies which task set in a service is the primary task set. Any parameters that are updated on the primary task
set in a service will transition to the service. This is used when a service uses the EXTERNAL
deployment controller type. For more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
updateServicePrimaryTaskSetRequest - default CompletableFuture<UpdateServicePrimaryTaskSetResponse> updateServicePrimaryTaskSet(Consumer<UpdateServicePrimaryTaskSetRequest.Builder> updateServicePrimaryTaskSetRequest)
Modifies which task set in a service is the primary task set. Any parameters that are updated on the primary task
set in a service will transition to the service. This is used when a service uses the EXTERNAL
deployment controller type. For more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the UpdateServicePrimaryTaskSetRequest.Builder
avoiding the need to create one manually via UpdateServicePrimaryTaskSetRequest.builder()
updateServicePrimaryTaskSetRequest - A Consumer that will call methods on UpdateServicePrimaryTaskSetRequest.Builder to create
a request.default CompletableFuture<UpdateTaskSetResponse> updateTaskSet(UpdateTaskSetRequest updateTaskSetRequest)
Modifies a task set. This is used when a service uses the EXTERNAL deployment controller type. For
more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
updateTaskSetRequest - default CompletableFuture<UpdateTaskSetResponse> updateTaskSet(Consumer<UpdateTaskSetRequest.Builder> updateTaskSetRequest)
Modifies a task set. This is used when a service uses the EXTERNAL deployment controller type. For
more information, see Amazon ECS Deployment
Types in the Amazon Elastic Container Service Developer Guide.
This is a convenience which creates an instance of the UpdateTaskSetRequest.Builder avoiding the need to
create one manually via UpdateTaskSetRequest.builder()
updateTaskSetRequest - A Consumer that will call methods on UpdateTaskSetRequest.Builder to create a request.default EcsAsyncWaiter waiter()
EcsAsyncWaiter using this client.
Waiters created via this method are managed by the SDK and resources will be released when the service client is closed.
EcsAsyncWaiterCopyright © 2021. All rights reserved.