public static interface GenerateDataKeyPairRequest.Builder extends KmsRequest.Builder, SdkPojo, CopyableBuilder<GenerateDataKeyPairRequest.Builder,GenerateDataKeyPairRequest>
| Modifier and Type | Method and Description |
|---|---|
GenerateDataKeyPairRequest.Builder |
dryRun(Boolean dryRun)
Checks if your request will succeed.
|
GenerateDataKeyPairRequest.Builder |
encryptionContext(Map<String,String> encryptionContext)
Specifies the encryption context that will be used when encrypting the private key in the data key pair.
|
GenerateDataKeyPairRequest.Builder |
grantTokens(Collection<String> grantTokens)
A list of grant tokens.
|
GenerateDataKeyPairRequest.Builder |
grantTokens(String... grantTokens)
A list of grant tokens.
|
GenerateDataKeyPairRequest.Builder |
keyId(String keyId)
Specifies the symmetric encryption KMS key that encrypts the private key in the data key pair.
|
GenerateDataKeyPairRequest.Builder |
keyPairSpec(DataKeyPairSpec keyPairSpec)
Determines the type of data key pair that is generated.
|
GenerateDataKeyPairRequest.Builder |
keyPairSpec(String keyPairSpec)
Determines the type of data key pair that is generated.
|
GenerateDataKeyPairRequest.Builder |
overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration) |
GenerateDataKeyPairRequest.Builder |
overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer) |
default GenerateDataKeyPairRequest.Builder |
recipient(Consumer<RecipientInfo.Builder> recipient)
A signed
attestation document from an Amazon Web Services Nitro enclave and the encryption algorithm to use with
the enclave's public key.
|
GenerateDataKeyPairRequest.Builder |
recipient(RecipientInfo recipient)
A signed
attestation document from an Amazon Web Services Nitro enclave and the encryption algorithm to use with
the enclave's public key.
|
buildoverrideConfigurationequalsBySdkFields, sdkFieldscopyapplyMutation, buildGenerateDataKeyPairRequest.Builder encryptionContext(Map<String,String> encryptionContext)
Specifies the encryption context that will be used when encrypting the private key in the data key pair.
Do not include confidential or sensitive information in this field. This field may be displayed in plaintext in CloudTrail logs and other output.
An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.
For more information, see Encryption context in the Key Management Service Developer Guide.
encryptionContext - Specifies the encryption context that will be used when encrypting the private key in the data key
pair. Do not include confidential or sensitive information in this field. This field may be displayed in plaintext in CloudTrail logs and other output.
An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.
For more information, see Encryption context in the Key Management Service Developer Guide.
GenerateDataKeyPairRequest.Builder keyId(String keyId)
Specifies the symmetric encryption KMS key that encrypts the private key in the data key pair. You cannot specify an asymmetric KMS key or a KMS key in a custom key store. To get the type and origin of your KMS key, use the DescribeKey operation.
To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it
with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the
key ARN or alias ARN.
For example:
Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab
Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab
Alias name: alias/ExampleAlias
Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias
To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.
keyId - Specifies the symmetric encryption KMS key that encrypts the private key in the data key pair. You
cannot specify an asymmetric KMS key or a KMS key in a custom key store. To get the type and origin of
your KMS key, use the DescribeKey operation.
To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name,
prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account,
you must use the key ARN or alias ARN.
For example:
Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab
Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab
Alias name: alias/ExampleAlias
Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias
To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.
GenerateDataKeyPairRequest.Builder keyPairSpec(String keyPairSpec)
Determines the type of data key pair that is generated.
The KMS rule that restricts the use of asymmetric RSA and SM2 KMS keys to encrypt and decrypt or to sign and verify (but not both), and the rule that permits you to use ECC KMS keys only to sign and verify, are not effective on data key pairs, which are used outside of KMS. The SM2 key spec is only available in China Regions.
keyPairSpec - Determines the type of data key pair that is generated.
The KMS rule that restricts the use of asymmetric RSA and SM2 KMS keys to encrypt and decrypt or to sign and verify (but not both), and the rule that permits you to use ECC KMS keys only to sign and verify, are not effective on data key pairs, which are used outside of KMS. The SM2 key spec is only available in China Regions.
DataKeyPairSpec,
DataKeyPairSpecGenerateDataKeyPairRequest.Builder keyPairSpec(DataKeyPairSpec keyPairSpec)
Determines the type of data key pair that is generated.
The KMS rule that restricts the use of asymmetric RSA and SM2 KMS keys to encrypt and decrypt or to sign and verify (but not both), and the rule that permits you to use ECC KMS keys only to sign and verify, are not effective on data key pairs, which are used outside of KMS. The SM2 key spec is only available in China Regions.
keyPairSpec - Determines the type of data key pair that is generated.
The KMS rule that restricts the use of asymmetric RSA and SM2 KMS keys to encrypt and decrypt or to sign and verify (but not both), and the rule that permits you to use ECC KMS keys only to sign and verify, are not effective on data key pairs, which are used outside of KMS. The SM2 key spec is only available in China Regions.
DataKeyPairSpec,
DataKeyPairSpecGenerateDataKeyPairRequest.Builder grantTokens(Collection<String> grantTokens)
A list of grant tokens.
Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.
grantTokens - A list of grant tokens.
Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.
GenerateDataKeyPairRequest.Builder grantTokens(String... grantTokens)
A list of grant tokens.
Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.
grantTokens - A list of grant tokens.
Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.
GenerateDataKeyPairRequest.Builder recipient(RecipientInfo recipient)
A signed
attestation document from an Amazon Web Services Nitro enclave and the encryption algorithm to use with
the enclave's public key. The only valid encryption algorithm is RSAES_OAEP_SHA_256.
This parameter only supports attestation documents for Amazon Web Services Nitro Enclaves. To include this parameter, use the Amazon Web Services Nitro Enclaves SDK or any Amazon Web Services SDK.
When you use this parameter, instead of returning a plaintext copy of the private data key, KMS encrypts the
plaintext private data key under the public key in the attestation document, and returns the resulting
ciphertext in the CiphertextForRecipient field in the response. This ciphertext can be decrypted
only with the private key in the enclave. The CiphertextBlob field in the response contains a
copy of the private data key encrypted under the KMS key specified by the KeyId parameter. The
PrivateKeyPlaintext field in the response is null or empty.
For information about the interaction between KMS and Amazon Web Services Nitro Enclaves, see How Amazon Web Services Nitro Enclaves uses KMS in the Key Management Service Developer Guide.
recipient - A signed attestation document from an Amazon Web Services Nitro enclave and the encryption algorithm to
use with the enclave's public key. The only valid encryption algorithm is
RSAES_OAEP_SHA_256.
This parameter only supports attestation documents for Amazon Web Services Nitro Enclaves. To include this parameter, use the Amazon Web Services Nitro Enclaves SDK or any Amazon Web Services SDK.
When you use this parameter, instead of returning a plaintext copy of the private data key, KMS
encrypts the plaintext private data key under the public key in the attestation document, and returns
the resulting ciphertext in the CiphertextForRecipient field in the response. This
ciphertext can be decrypted only with the private key in the enclave. The CiphertextBlob
field in the response contains a copy of the private data key encrypted under the KMS key specified by
the KeyId parameter. The PrivateKeyPlaintext field in the response is null
or empty.
For information about the interaction between KMS and Amazon Web Services Nitro Enclaves, see How Amazon Web Services Nitro Enclaves uses KMS in the Key Management Service Developer Guide.
default GenerateDataKeyPairRequest.Builder recipient(Consumer<RecipientInfo.Builder> recipient)
A signed
attestation document from an Amazon Web Services Nitro enclave and the encryption algorithm to use with
the enclave's public key. The only valid encryption algorithm is RSAES_OAEP_SHA_256.
This parameter only supports attestation documents for Amazon Web Services Nitro Enclaves. To include this parameter, use the Amazon Web Services Nitro Enclaves SDK or any Amazon Web Services SDK.
When you use this parameter, instead of returning a plaintext copy of the private data key, KMS encrypts the
plaintext private data key under the public key in the attestation document, and returns the resulting
ciphertext in the CiphertextForRecipient field in the response. This ciphertext can be decrypted
only with the private key in the enclave. The CiphertextBlob field in the response contains a
copy of the private data key encrypted under the KMS key specified by the KeyId parameter. The
PrivateKeyPlaintext field in the response is null or empty.
For information about the interaction between KMS and Amazon Web Services Nitro Enclaves, see How Amazon Web Services Nitro Enclaves uses KMS in the Key Management Service Developer Guide.
This is a convenience method that creates an instance of theRecipientInfo.Builder avoiding the need
to create one manually via RecipientInfo.builder().
When the Consumer completes, SdkBuilder.build() is called immediately and its
result is passed to recipient(RecipientInfo).
recipient - a consumer that will call methods on RecipientInfo.Builderrecipient(RecipientInfo)GenerateDataKeyPairRequest.Builder dryRun(Boolean dryRun)
Checks if your request will succeed. DryRun is an optional parameter.
To learn more about how to use this parameter, see Testing your KMS API calls in the Key Management Service Developer Guide.
dryRun - Checks if your request will succeed. DryRun is an optional parameter.
To learn more about how to use this parameter, see Testing your KMS API calls in the Key Management Service Developer Guide.
GenerateDataKeyPairRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
overrideConfiguration in interface AwsRequest.BuilderGenerateDataKeyPairRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
overrideConfiguration in interface AwsRequest.BuilderCopyright © 2023. All rights reserved.